Flow Sensors

Comprehensive Microsystems

Volumn 2, Issue , 2007, Pages 209-272

  Haasl, Sjoerd ^a   Stemme, Göran ^b  

^a Imego AB The Institute of Micro and Nanotechnology   (Sweden)

^b ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

Author keywords

Anemometer; Calorimetric; Cantilever; Carbon nanotube; Differential pressure; Drag force; Electrical impedance; Electrochemical; Electrohydrodynamic; Electromagnetic; Faraday's law; Lift force; Mechanical flow sensor; Medical applications; Micromachined flow sensor; Multi axis; On chip electronics; Optical; Skin friction; Thermal flow sensor; Time of flight; Ultrasonic; Wall shear stress

Indexed keywords

EID: 84888308256     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-044452190-3.00054-9     Document Type: Chapter

References (330)

1. Adrian R.J. Twenty years of particle image velocimetry. Exp. Fluids 2005, 39(2):159-169.
2. Ahmad N. Surface acoustic wave flow sensor. Ultrasonics Symposium, IEEE 1985 1985, 483-485.
3. Al Khalfioui M., Michez A., Giani A., Boyer A., Foucaran A. Anemometer based on Seebeck effect. Sens. Actuators A Phys. 2003, 107(1):36-41.
4. Appukuttan A., Shyy W., Sheplak M., Cattafesta L. Mixed convection induced by MEMS-based thermal shear stress sensors. Numer. Heat Transf. A (Appl.) 2003, 43(3):283-305.
5. Arkilic E., Schmidt M., Breuer K. Gaseous slip flow in long microchannels. J. Microelectromech. Syst. 1997, 6(2):167-178.
6. Ashauer M., Glosch H., Hedrich F., Hey N., Sandmaier H., Lang W. Thermal flow sensor for liquids and gases. Proceedings of the IEEE Micro Electro Mechanical Systems (MEMS) 1998, Heidelberg, Germany, pp. 351-5.
7. Ashauer M., Glosch H., Hedrich F., Hey N., Sandmaier H., Lang W. Thermal flow sensor for liquids and gases based on combinations of two principles. Sens. Actuators A (Phys.) 1999, A73(1-2):7-13.
8. Ashauer M., Scholz H., Briegel R., Sandmaier H., Lang W. Thermal flow sensors for very small flow rate. TRANSDUCERS '01. EUROSENSORS XV. 11th Int. Conf. Solid-State Sensors and Actuators. Digest of Technical Papers 2001, Vol. 2:1464-1467.
9. Ayliffe H., Rabbitt R. An electric impedance based microelectromechanical system flow sensor for ionic solutions. Meas. Sci. Technol. 2003, 14(8):1321-1327.
10. Ayliffe H., Frazier A., Rabbitt R. Electric impedance spectroscopy using microchannels with integrated metal electrodes. J. Microelectromech. Syst. 1999, 8(1):50-57.
11. van Baar J.J., Wiegerink R.J., Lammerink T.S.J., Krijnen G.J.M., Elwenspoek M. Micromachined structures for thermal measurements of fluid and flow parameters. J. Micromech. Microeng. 2001, 11(4):311-318.
12. van Baar J., Dijkstra M., Wiegerink R., Lammerink T., Krijnen G. Fabrication of arrays of artificial hairs for complex flow pattern recognition. Proc. IEEE Sensors 2003 2003, Vol. 1:332-336.
13. van Baar J., Dijkstra M., Wiegerink R., Lammerink T., De Boer R., Krijnen G. Arrays of cricket-inspired sensory hairs with capacitive motion detection. Proc. IEEE Int. Conf. Micro Electro Mechanical Systems (MEMS) 2005, 646-649.
14. Barlian A., Narain R., Li J., Quance C., Ho A., Mukundan V., Pruitt B. Piezo resistive MEMS underwater shear stress sensors. Micro Electro Mechanical Systems 2006, 19th IEEE Int. Conf. MEMS 2006 2006, 626-629.
15. Becker E., Ehrfeld W., Hagmann P., Maner A., Munchmeyer D. Fabrication of microstructures with high aspect ratios and great structural heights by synchrotron radiation lithography, galvanoforming, and plastic moulding (LIGA process). Microelectron. Eng. 1986, 4(1):35-56.
16. Bedö G., Fannasch H., Müller R. Silicon flow sensor for gases and liquids using AC measurements. Sens. Actuators A Phys. 2000, 85(1):124-132.
17. Bentley J.P. Principles of Measurement Systems 1983, Longman, London, pp. 283-291, Chap. 12.3.1, Differential pressure flowmeters.
18. Bentley J.P. Principles of Measurement Systems 1983, Longman, London, pp. 408-412, Chap. 16, Ultrasonic measurement systems.
19. Berberig O., Nottmeyer K., Mizuno J., Kanai Y., Kobayashi T. Prandtl micro flow sensor (PMFS): A novel silicon diaphragm capacitive sensor for flow velocity measurement. Int. Conf. Solid-State Sensors and Actuators, Transducers '97 1997, Vol. 1:155-158.
20. Betzner T.M., Doty J.R., Hamad A.M.A., Henderson H.T., Berger F.G. Structural design and characteristics of a thermally isolated, sensitivity-enhanced, bulk-micromachined, silicon flow sensor. J. Micromech. Microeng. 1996, 6(2):217-227.
21. Billat S., Glosch H., Kunze M., Hedrich F., Frech J., Auber J., Lang W., Sandmaier H., Wimmer W. Convection-based micromachined inclinometer using SOI technology. Tech. Dig. MEMS 2001. 14th IEEE Int. Conf. Micro Electro Mechanical Systems 2001, 159-161.
22. Billat S., Glosch H., Kunze M., Hedrich F., Frech J., Auber J., Sandmaier H., Wimmer W., Lang W. Micromachined inclinometer with high sensitivity and very good stability. Sens. Actuators A Phys. 2002, 97-98:125-130.
23. Boillat M., van der Wiel A., Hoogerwerf A., de Rooij N. A differential pressure liquid flow sensor for flow regulation and dosing systems. Proceedings of the Micro Electro Mechanical Systems, 1995, MEMS '95. IEEE 1995, 350-352.
24. Bosman J., De Bruijn J., Riedijk F., Van Oudheusden B., Huijsing J. Integrated smart two-dimensional thermal flow sensor with Seebeck-voltage-to-frequency conversion. Sens. Actuators A Phys. 1992, 31(1-3 pt 3):9-16.
25. Bouwstra S., Kemna P., Legtenberg R. Thermally excited resonating membrane mass flow sensor. Sens. Actuators 1989, 20(3):213-223.
26. Bouwstra S., Legtenberg R., Tilmans H., Elwenspoek M. Resonating microbridge mass flow sensor. Sens. Actuators A (Phys.) 1990, A21(1-3):332-335.
27. Brace J., Sanfelippo T., Joshi S. Mass flow sensing using surface acoustic waves. IEEE 1989 Ultrasonics Symposium Proceedings 1989, 573-578.
28. Bracio B., Fasching R., Kohl F., Krocza J. A smart thin-film flow sensor for biomedical applications. Proc. 22nd Annu. Int. Conf. IEEE Eng. Med. Biol. Soc. 2000, Vol. 4:2800-2801.
29. Breuer K.S., Bayt R.L., Nayaar A. Measurement of shear stress and temperature using MEMS fabricated sensors. ASME Microelectromechanical Systems 1999, Vol. 1. American Society of Mechanical Engineers, Fairfield, NJ, pp. 229-233, Subdivision 1999.
30. Briers J.D. Laser Doppler, speckle and related techniques for blood perfusion mapping and imaging. Physiol. Meas. 2001, 22(4):R35-R66.
31. de Bree H.-E. An overview of microflown technologies. Acta Acustica United Acustica 2003, 89(1):163-172.
32. de Bree H.-E., Leussink P., Korthorst T., Jansen H., Lammerink T., Elwenspoek M. The mu-flown, a novel device measuring acoustical flows. 8th Int. Conf. Solid-State Sensors and Actuators and Eurosensors IX. Dig. Tech. Pap 1995, 536-539.
33. de Bree H.-E., Korthorst T., Leussink P., Janssen H., Elwenspoek M. A method to measure apparent acoustic pressure, flow gradient and acoustic intensity using two micromachined flow microphones. Eurosensors X 1996, Leuven, Belgium.
34. de Bree H.-E., Jansen H., Lammerink T., Krijnen G., Elwenspoek M. Bi-directional fast flow sensor with a large dynamic range. J. Micromech. Microeng. 1999, 9(2):186-189.
35. Brücker C., Spatz J., Schrüder W. Feasability study of wall shear stress imaging using microstructured surfaces with flexible micropillars. Exp. Fluids 2005, 39(2):464-474.
36. Bruschi P., Navarrini D., Piotto M. A flow sensor for liquids based on a single temperature sensor operated in pulsed mode. Sens. Actuators A (Phys.) 2004, A110(1-3):269-275.
37. Bruschi P., Navarrini D., Piotto M., Raffa G. Sensitivity improvement of integrated thermal anemometers obtained by jet flow impingement. Sens. Actuators A Phys. 2004, 113(3):301-306.
38. Bruschi P., Diligenti A., Navarrini D., Piotto M. A double heater integrated gas flow sensor with thermal feedback. Sens. Actuators A Phys. 2005, 123-124:210-215.
39. Bruun H.H. Hotwire Anemometry: Principles and Signal Analysis 1995, Oxford University Press Inc., New York.
40. Bu J.-U., Kim T.-Y., Kim I.-S., Jun Y.-S., Shim Y.-C., Kim S.-T. Silicon-based thermal comfort sensing device. Sens. Actuators A Phys. 1996, 54(1-3):468-471.
41. Buchner R., Maiwald M., Sosna C., Schary T., Benecke W., Lang W. Miniaturised thermal flow sensors for rough environments. 19th IEEE Int. Conf. Micro Electro Mechanical Systems 2006 (MEMS 2006) 2006, 582-585.
42. Cain A., Chandrasekaran V., Nishida T., Sheplak M. Development of a wafer-bonded, siliconnitride membrane thermal shear-stress sensor with platinum sensing element. Technical Digest Solid-State Sensor and Actuator Workshop (TRF) 2000, 300-303.
43. Castaner L., Jimenez V., Dominguez M., Masana F., Rodriguez A. Flow measurement hits home. Circuits Devices Mag. IEEE 1997, 13(1):14-18.
44. Chaehoi A., Dumas N., Mailly F., Latorre L., Nouet P. Absolute pitch, roll and yaw measurement on CMOS. Sensors, 2005 IEEE 2005, 133-136.
45. Chavan A., Prawdzik D., Manlove G., Long S., Dubois P., Dewes B. Non-linear temperature compensation for a micromachined bi-directional thermal flow sensor. IEEE 16th Annu. Int. Conf. Micro Electro Mechanical Systems 2003 (MEMS '03) 2003, 510-513.
46. Chen J., Liu C. Development and characterization of surface micromachined, out-of-plane hotwire anemometer. J. Microelectromech. Syst. 2003, 12(6):979-988.
47. Chen J., Zou J., Liu C. A surface micromachined, out-of-plane anemometer. Tech. Dig.Proc. MEMS 2002 IEEE Int. Conf. 15th IEEE Int. Conf. Micro Electro Mechanical Systems (MEMS 2002) 2002, 332-335.
48. Chen J., Fan Z., Zou J., Engel J., Liu C. Two-dimensional micromachined flow sensor array for fluid mechanics studies. J. Aerospace Eng. 2003, 16(2):85-97.
49. Chen J., Engel J., Chen N., Liu C. A monolithic integrated array of out-of-plane hot-wire flow sensors and demonstration of boundary-layer flow imaging. 18th IEEE Int. Conf. Micro Electro Mechanical Systems, 2005 (MEMS 2005) 2005, 299-302.
50. Chen X., Lal A. Integrated pressure and flow sensor in silicon-based ultrasonic surgical actuator. Proc. IEEE Ultrason. Symp. 2001, 2:1373-1376.
51. Cho S.T., Najafi K., Lowman C.E., Wise K.D. An ultrasensitive silicon pressure-based microflow sensor. IEEE Trans. Electron. Devices 1992, 39(4):825-835.
52. Chun D., Yaqiang W., Wang-Yuelin J., Zhonghe Discussion on the optical-coupling in silicon optical-type micromechanical sensors. Proc. 5th Int. Conf. Solid-State and Integrated Circuit Technology 1998, 953-956.
53. Chung J., Lee K.-H., Lee J. Multi-walled carbon nanotube sensors. TRANSDUCERS '03. 12th Int. Conf. Solid-State Sensors, Actuators and Microsystems. Dig. Tech. Pap 2003, Vol. 1:718-721.
54. Cittadine A. MEMS reshapes ultrasonic sensing. Sensors 2000, 17(2):17-18.
55. Collins J., Lee A. Microfluidic flow transducer based on the measurement of electrical admittance. Lab Chip 2004, 4(1):7-10.
56. Dao D.V., Toriyama T., Wells J., Sugiyama S. Six-degree of freedom micro force-moment sensor for application in geophysics. Tech. Dig. Proc. MEMS 2002 IEEE Int. Conf. 15th IEEE Int. Conf. Micro Electro Mechanical Systems 2002, 312-315.
57. Dao D., Toriyama T., Sugiyama S., Nguyen A., Wells J. A MEMS-based microsensor to measure all six components of force and moment on a near-wall particle in turbulent flow. TRANSDUCERS '03. 12th Int. Conf. Solid-State Sensors, Actuators and Microsystems. Dig. Tech. Pap. 2003, Vol. 1:504-507.
58. De Bruyne B., Pijls N.H.J., Smith L., Wievegg M., Heyndrickx G.R. Coronary thermodilution to assess flow reserve: Experimental validation. Circulation 2001, 104:2003-2006.
59. DeHennis A., Wise K. A fully integrated multisite pressure sensor for wireless arterial flow characterization. J. Microelectromech. Syst. 2006, 15(3):678-685.
60. Desai A.V., Haque M.A. Design and fabrication of a direction sensitive MEMS shear stress sensor with high spatial and temporal resolution. J. Micromech. Microeng. 2004, 14(12):1718-1725.
61. Dijkstra M., van Baar J., Wiegerink R., Lammerink T., de Boer J., Krijnen G. Artificial sensory hairs based on the flow sensitive receptor hairs of crickets. J. Micromech. Microeng. 2005, 15(7):132-138.
62. Dillner U., Kessler E., Poser S., Baier V., Muller J. Low power consumption thermal gas-flow sensor based on thermopiles of highly effective thermoelectric materials. Sens. Actuators A Phys. 1997, 60(1-3):1-4.
63. Dittmann D., Ahrens R., Rummler Z., Schlote-Holubek K., Schomburg W. Low-cost flow transducer fabricated with the AMANDA-process. TRANSDUCERS '01. EUROSENSORS XV. 11th Int. Conf. Solid-State Sensors and Actuators. Dig. Tech. Pap. 2001, Vol. 2:1472-1475.
64. Dominguez D., Bonvalot B., Chau M.T., Suski J. Fabrication and characterization of a thermal flow sensor based on porous silicon technology. J. Micromech. Microeng. 1993, 3(4):247-249.
65. Dominguez M., Ricart J., Moreno A., Contesti X., Garriga S. Low cost PCB thermal sigma-delta air flowmeter with improved thermal isolation. Sens. Actuators A Phys. 2005, 121(2):388-394.
66. Ebefors T 2000 Polyimide v-groove joints for three-dimensional silicon transducers. Ph.D. thesis, Royal Institute of Technology (KTH).
67. Ebefors T., Kälvesten E., Stemme G. Three dimensional silicon triple-hot-wire anemometer based on polyimide joints. Proc. MEMS 98. IEEE. 11th Annu. Int. Workshop Micro Electro Mechanical Systems 1998, 93-98.
68. Ebefors T., Ulfstedt-Mattsson J., Kaelvesten E., Stemme G. 3D micromachined devices based on polyimide joint technology. Proc. SPIE - Int. Soc. Opt. Eng. 1999, 3892:118-132.
69. Elwenspoek M. Thermal flow micro sensors. 1999 International Semiconductor Conference 1999. CAS '99 Proceedings 1999, Vol. 2:423-435.
70. Elwenspoek M., Wiegerink R. Mechanical Microsensors 2001, Springer, Berlin, pp. 153-208, Chap. Flow Sensors.
71. Engel J., Chen J., Chen N., Pandya S., Liu C. Development and characterization of an artificial hair cell based on polyurethane elastomer and force sensitive resistors. Sensors, 2005 IEEE 2005, 1014-1017.
72. Enoksson P., Stemme G., Stemme E. A silicon resonant sensor structure for Coriolis mass-flow measurements. J. Microelectromech. Syst. 1997, 6(2):119-125.
73. Ernst H., Jachimowicz A., Urban G.A. High resolution flow characterization in Bio-MEMS. Sens. Actuators A Phys. 2002, 100(1):54-62.
74. Esashi M. Micro flow sensor and integrated magnetic oxygen sensor using it. TRANSDUCERS '91. 1991 Int. Conf. Solid-State Sensors and Actuators. Dig. Tech. Pap 1991, 34-37.
75. Fan C-W, Nien C-C, Gwo T-T, Chu K-H 2002a Coriolis force type flow meter using optical interferometer. Tech. Rep. US Pat. 6 722 209, Industrial Technology Research Institute (Hsinchu Hsien, TW).
76. Fan Z., Chen J., Zou J., Bullen D., Liu C., Delcomyn F. Design and fabrication of artificial lateral line flow sensors. J. Micromech. Microeng. 2002, 12(5):655-661.
77. Fourguette D, Modarress D, Taugwalder F, Wilson D, Koochesfahani M, Gharib M,2001 Miniature and MOEMS flow sensors. 31st AIAA Fluid Dynamics Conference & Exhibition, Anaheim, CA, USA.
78. Fourguette D, Modarress D, Wilson D, Koochesfahani M, Gharib M, (2003) An optical MEMS-based shear stress sensor for high Reynolds number applications. 41st Aerospace Sciences Meeting and Exhibition Reno, NV, USA.
79. Frechette L., Jacobson S., Breuer K., Ehrich F., Ghodssi R., Khanna R., Wong C.W., Zhang X., Schmidt M., Epstein A. Demonstration of a microfabricated high-speed turbine supported on gas bearings. Technical Digest. Solid-State Sensor and Actuator Workshop 2000, 43-47.
80. Frederick J., Zemel J., Goldfine N. Pyroelectric anemometers: Experimental geometric considerations. J. Appl. Phys. 1985, 57(11):4936-4943.
81. Fricke K. A micromachined mass-flow sensor with integrated electronics on GaAs. Sens. Actuators A Phys. 1994, 45(2):91-94.
82. Friedberger A., Kreisl P., Muller G., Kassing R. A versatile and modularizable micromachining process for the fabrication of thermal microsensors and microactuators. J. Micromech. Microeng. 2001, 11(6):623-629.
83. Fürjes P., Légrádi G., Dücso C., Aszódi A., Bársony I. Thermal characterisation of a direction dependent flow sensor. Sens. Actuators A Phys. 2004, 115(2-3):417-423.
84. Furuberg L., Wang D., Vogl A., Merveille C., Hansen S.I., Rogne H., Solli L. New pressure sensor, optical mirrors and a flow rate sensor manufactured by bulk micromachining. Proc. Sensor 2003 2003, A6.3.
85. Gajda M.A., Ahmed H. Applications of thermal silicon sensors on membranes. Sens. Actuators A Phys. 1995, 49(1-2):1-9.
86. Gamage S.K., Okulan N., Henderson H.T. Behavior of bulk micromachined silicon flow sensor in the negative differential resistance regime. J. Micromech. Microeng. 2000, 10(3):421-429.
87. Gass V., van der Schoot B., de Rooij N. Nanofluid handling by micro-flow-sensor based on drag force measurements. Proc. IEEE Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems 1993, 167-172.
88. Ghosh S., Sood A., Kumar N. Carbon nanotube flow sensors. Science 2003, 299(5609):1042-1044.
89. Ghosh S., Sood A., Ramaswamy S., Kumar N. Flow-induced voltage and current generation in carbon nanotubes. Phys. Rev. B (Condens. Matter Mater. Phys.) 2004, 70(20):205423-205431.
90. Glaninger A., Jachimowicz A., Kohl F., Chabicovsky R., Urban G. Wide range semiconductor flow sensors. Sens. Actuators A (Phys.) 2000, A85(1-3):139-146.
91. Go J.S., Kim S.J., Lim G., Yun H., Lee J., Song I., Pak Y.E. Heat transfer enhancement using flow-induced vibration of a microfin array. Sens. Actuators A Phys. 2001, 90(3):232-239.
92. Gongora-Rubio M., Sola-Laguna L.M., Moffett P.J., Santiago-Aviles J.J. The utilization of low temperature co-fired ceramics (LTCC-ML) technology for meso-scale EMS, a simple thermistor based flow sensor. Sens. Actuators A Phys. 1999, 73(3):215-221.
93. Goodfellow Corporation Website. Online resource, access date 2007: URL http://www.goodfellow.com.
94. Haasl S 2005 Assembly of microsystems for optical and fluidic applications. Ph.D. thesis, Royal Institute of Technology.
95. Haasl S., Mucha D., Chernoray V., Ebefors T., Enoksson P., Löfdahl L., Stemme G. Hybrid-mounted micromachined aluminum hotwires for wall shear-stress measurements. J. Microelectromech. Syst. 2005, 14(2):254-260.
96. Häberli A., Mayer F., Jaeggi D., Baltes H. IC microsensors - Between system and technology. Proc. 2nd IEEE-CAS Region 8 Workshop Analog and Mixed IC Design, 1997 1997, 36-40.
97. Han G., Bird J.C., Johan K., Westin A., Cao Z., Breuer K.S. Infrared diagnostics for measuring fluid and solid motion inside silicon microdevices. Microscale Thermophys. Eng. 2004, 8(2):169-182.
98. Haronian D. Direct integration (DI) of solid state stress sensors with single crystal micro-electromechanical systems for integrated displacement sensing. 12th IEEE Int. Conf. Micro Electro Mechanical Systems 1999 (MEMS '99) 1999, 88-93.
99. Hauptmann P., Hoppe N., Puttmer A. Application of ultrasonic sensors in the process industry. Meas. Sci. Technol. 2002, 13(8):73-83.
100. Higurashi E., Sawada R., Ito T. An integrated laser blood flowmeter. J. Lightwave Technol. 2003, 21(3):591-595.
101. Himmelhaus M., Bley P., Mohr J., Wallrabe U. Integrated measuring system for the detection of the revolutions of LIGA microturbines in view of a volumetric flow sensor. J. Micromech. Microeng. 1992, 2(3):196-198.
102. Ho C.-M., Tai Y.-C. Micro-electro-mechanical systems (MEMS) and fluid flows. Annu. Rev. Fluid Mech. 1998, 30:579-612.
103. Holman J.P. Heat Transfer 1997, McGraw-Hill, New York, ISBN 0-07-114320-3. 8th edn.
104. Holmes A., Hong G., Pullen K., Buffard K. Axial-flow microturbine with electromagnetic generator: Design, CFD simulation, and prototype demonstration. 17th IEEE Int. Conf. Micro Electro Mechanical Systems, 2004 (MEMS '04) 2004, 568-571.
105. van Honschoten J., van Baar J., de Bree H.E., Lammerink T., Krijnen G., Elwenspoek M. Application of a microflown as a low-cost level sensor. J. Micromech. Microeng. 2000, 10(2):250-253.
106. van Honschoten J., Svetovoy V., Krijnen G., Elwenspoek M. Optimization of a thermal flow sensor for acoustic particle velocity measurements. J. Microelectromech. Syst. 2005, 14(3):436-443.
107. Horowitz S., Chen T., Chandrasekaran V., Tedjojuwono K., Nishida T., cattafesta L., Sheplak M. A micromachined geometric Moire interferometric floating-element shear stress sensor. AIAA Pap. 2004, 6309-6318.
108. Hsieh H.Y., Zemel J.N. Pyroelectric anemometry: Frequency, geometry and gas dependence. Sens. Actuators A Phys. 1995, 49(3):133-140.
109. Hsieh H., Spetz A., Zemel J. Wide range pyroelectric anemometers for gas flow measurements. Solid-State Sensors and Actuators 1991. Digest of Technical Papers, TRANSDUCERS '91 1991, 38-40.
110. Hsieh H., Spetz A., Zemel J. Pyroelectric anemometry: Vector and swirl measurements. Sens. Actuators A (Phys.) 1995, A49(3):141-147.
111. Hsieh H.Y., Zemel J.N., Bau H.H. Pyroelectric anemometry: Theory of operation. Sens. Actuators A Phys. 1995, 49(3):125-132.
112. Huang J.-B., Tong Q.-Y. Integrated multi-function sensor for flow velocity, temperature and vacuum measurements. Sens. Actuators 1989, 19(1):3-11.
113. Huang J.-B., Liu C., Jiang F., Tung S., Tai Y.-C., Ho C.-M. Fluidic shear-stress measurement using surface-micromachined sensors. IEEE Region 10 Annual International Conference, Proceedings/TENCON 1995, 16-19.
114. Huang J.-B., Tung S., Ho C.-M., Liu C., Tai Y.-C. Improved micro thermal shear-stress sensor. IEEE Trans. Instrum. Meas. 1996, 45(2):570-574.
115. Huang J., Jiang F., Tai Y., Ho C. A micro-electro-mechanical-system-based thermal shear-stress sensor with self-frequency compensation. Meas. Sci. Technol. 1999, 10(8):687-696.
116. Hung S.-T., Wong S.-C., Fang W. The development and application of microthermal sensors with a mesh-membrane supporting structure. Sens. Actuators A Phys. 2000, 84(1-2):70-75.
117. Hyman D., Pan T., Reshotko E., Mehregany M. Microfabricated shear stress sensors, part 2: Testing and calibration. AIAA J. 1999, 37(1):73-78.
118. Iijima S. Helical microtubules of graphitic carbon. Nature 1991, 354(6348):56-58.
119. Ito T., Sawada R., Higurashi E. Integrated microlaser Doppler velocimeter. J. Lightwave Technol. 1999, 17(1):30-34.
120. Jang J., Wereley S. A capacitive micro gas flow sensor based on slip flow. 17th IEEE Int. Conf. Micro Electro Mechanical Systems (MEMS 2004). Tech. Dig 2004, 540-543.
121. Jiang F., Tai Y.-C., Ho C.-M., Karan R., Garstenauer M. Theoretical and experimental studies of micromachined hot-wire anemometers. Technical Digest. International Electron Devices Meeting 1994 1994, 139-142.
122. Jiang F., Tai Y.-C., Ho C.-M., Li W. A micromachined polysilicon hot-wire anemometer. Technical Digest. Solid-State Sensor and Actuator Workshop. Transducer Res. Found 1994, 264-267.
123. Jiang F., Tai Y.-C., Huang J.-B., Ho C.-M. Polysilicon structures for shear stress sensors. IEEE Region 10 Annual International Conference, Proceedings/TENCON 1995, 12-15.
124. Jiang F., Tai Y.-C., Gupta B., Goodman R., Tung S., Huang J.-B., Ho C.-M. A surface-micromachined shear stress imager. Proc. IEEE, 9th Annu. Int. Workshop Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems 1996, 110-115.
125. Jiang F., Tai Y.-C., Walsh K., Tsao T., Lee G.-B., Ho C.-M. A flexible MEMS technology and its first application to shear stress sensor skin. Proc. IEEE. 10th Annu. Int. Workshop Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots (Cat. No.97CH36021) 1997, 465-470.
126. Jin X., Ladabaum I., Khuri-Yakub B. The microfabrication of capacitive ultrasonic transducers. J. Microelectromech. Syst. 1998, 7(3):295-302.
127. Johnson R.G., Higashi R.E. A highly sensitive silicon chip microtransducer for air flow and differential pressure sensing applications. Sens. Actuators 1987, 11:63-72.
128. Jørgensen F.E. Directional sensitivity of wire and fibre-film probes. DISA Info. 1971, 11:31-37.
129. Joshi S. Use of a surface-acoustic-wave (SAW) device to measure gas flow. IEEE Trans. Instrum. Meas. 1989, 38(3):824-826.
130. Joshi S. Flow sensors based on surface acoustic waves. Sens. Actuators A (Phys.) 1994, A44(3):191-197.
131. Joshi S., Jin Y. Application of a surface-acoustic-wave device for measurement of liquid flow rate. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 1990, 37(5):475-477.
132. Kaltsas G., Nassiopoulou A. Novel CMOS compatible monolithic silicon gas flow sensor with porous silicon thermal isolation. Sens. Actuators A (Phys.) 1999, A76(1-3):133-138.
133. Kaltsas G., Nassiopoulou A.G. Gas flow meter for application in medical equipment for respiratory control: Study of the housing. Sens. Actuators A Phys. 2004, 110(1-3):413-422.
134. Kaltsas G., Nassiopoulos A., Nassiopoulou A. Characterization of a silicon thermal gas-flow sensor with porous silicon thermal isolation. IEEE Sens. J. 2002, 2(5):463-475.
135. Kälvesten E., Vieider C., Löfdahl L., Stemme G. Integrated pressure-flow sensor for correlation measurements in turbulent gas flows. Int. Conf. Solid-State Sensors Actuators, Proc. 1995, Vol. 2. IEEE, Piscataway, NJ, USA, pp. 428-431.
136. Kälvesten E., Vieider C., Löfdahl L., Stemme G. An integrated pressure-flow sensor for correlation measurements in turbulent gas flows. Sens. Actuators A Phys. 1996, 52(1-3):51-58.
137. Kang J., Park S. Integrated comfort sensing system on indoor climate. Sens. Actuators A Phys. 2000, 82(1):302-307.
138. Kersjes R., Mokwa W. Fast liquid flow sensor with thermal isolation by oxide-filled trenches. Sens. Actuators A Phys. 1995, 47(1-3 pt 4):373-379.
139. Kersjes R., Eichholz J., Langerbein A., Manoli Y., Mokwa W. An integrated sensor for invasive blood-velocity measurement. Sens. Actuators A Phys. 1993, 37-38:674-678.
140. Kersjes R., Liebscher F., Spiegel E., Manoli Y., Mokwa W. An invasive catheter flow sensor with on-chip CMOS readout electronics for the on-line determination of blood flow. Sens. Actuators A (Phys.) 1996, A54(1-3):563-567.
141. Kim I.C., Lee S.J. Characterization of a miniature thermal shear-stress sensor with backside connections. Sens. Actuators A (Phys.) 2006, 128(2):305-311.
142. Kim S., Nam T., Park S. Measurement of flow direction and velocity using a micromachined flow sensor. Sens. Actuators A Phys. 2004, 114(2-3):312-318.
143. Kim Y.-M., Seo C.-T., Eun D.-S., Park S.-G., Jo C.-S., Lee J.-H. Characteristics of cantilever beam fabricated by silicon micromachining for flow sensor application. Sensors 2003 Proc. IEEE 2003, Vol. 1:642-646.
144. King L.V. On the convection of heat from small cylinders in a stream of fluid: Determination of the convection constants of small platinum wires with applications to hot-wire anemometry. Philos. Trans. R. Soc. 1914, 214:373-432.
145. Koch M., Schabmueller C., Evans A., Brunnschweiler A. Micromachined chemical reaction system. Sens. Actuators A (Phys.) 1999, A74(1-3):207-210.
146. Kohl F., Jachimowicz A., Steurer J., Glatz R., Kuttner J., Biacovsky D., Olcaytug F., Urban G. A micromachined flow sensor for liquid and gaseous fluids. Sens. Actuators A (Phys.) 1994, A41(1-3):293-299.
147. Kotzar G., Freas M., Abel P., Fleischman A., Roy S., Zorman C., Moran J.M., Melzak J. Evaluation of MEMS materials of construction for implantable medical devices. Biomaterials 2002, 23(13):2737-2750.
148. Král P., Shapiro M. Nanotube electron drag in flowing liquids. Phys. Rev. Lett. 2001, 86(1):131-134.
149. Kraus T., Gunther A., de Mas N., Schmidt M., Jensen K. An integrated multiphase flow sensor for microchannels. Exp. Fluids 2004, 36(6):819-832.
150. Kuehnel W., Sherman S. A surface micromachined silicon accelerometer with on-chip detection circuitry. Sens. Actuators A (Phys.) 1994, A45(1):7-16.
151. van Kuijk J., Lammerink T.S., de Bree H.-E., Elwenspoek M., Fluitman J.H.J. Multiparameter detection in fluid flows. Sens. Actuators A (Phys.) 1995, A47(1-3):369-372.
152. Kuttner H., Urban G., Jachimowicz A., Kohl F., Olcaytug F., Goiser P. Microminiaturized thermistor arrays for temperature gradient, flow and perfusion measurements. Sens. Actuators A Phys. 1991, 27(1-3):653-656.
153. Kwok C.Y., Lin K.M., Huang R.S. A silicon thermocapacitive flow sensor with frequency modulated output. Sens. Actuators A (Phys.) 1996, A57(1):35-39.
154. Ladabaum I., Jin X., Soh H., Atalar A., Khuri-Yakub B. Surface micromachined capacitive ultrasonic transducers. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 1998, 45(3):678-690.
155. Lai P.T., Liu B., Zheng X., Li B., Zhang S., Wu Z. Monolithic integrated spreading-resistance silicon flow sensor. Sens. Actuators A Phys. 1997, 58(1):85-88.
156. Lambert D K 1986 Thermal diffusion flow sensor. Tech. Rep. US Pat. 4 576 050, General Motors Corporation, Detroit, MI.
157. Lambert D.K., Harrington C.R. An air flow sensor based on interface thermal wave propagation. J. Appl. Phys. 1986, 59(1):59-65.
158. Lammerink T., Tas N., Elwenspoek M., Fluitman J. Micro-liquid flow sensor. Sens. Actuators A (Phys.) 1993, A37-A38:45-50.
159. Lammerink T.S., Dijkstra F., Houkes Z., van Kuijk J. Intelligent gas-mixture flow sensor. Sens. Actuators A Phys. 1995, 47(1-3 pt 4):380-384.
160. Lammerink T., Tas N., Krijnen G., Elwenspoek M. A new class of thermal flow sensors using Delta T=0 as a control signal. Proc. IEEE 13th Annu. Int. Conf. Micro Electro Mechanical Systems 2000, 525-530.
161. Lammerink T., Tas N., van Honschoten J., Krijnen G., van Baar J., Elwenspoek M. AC-driven temperature-balance flow sensor. TRANSDUCERS '01. EUROSENSORS XV. 11th Int. Conf. Solid-State Sensors and Actuators. Dig. Tech. Pap. 2001, Vol. 2:1448-1451.
162. Lee G.-B., Kuo T.-Y., Wu W.-Y. A novel micromachined flow sensor using periodic flapping motion of a planar jet impinging on a V-shaped plate. Exp. Therm. Fluid Sci. 2002, 26(5):435-444.
163. Legtenberg R., Bouwstra S., Fluitman J.H.J. Resonating microbridge mass flow sensor with low-temperature glass-bonded cap wafer. Sens. Actuators A Phys. 1991, 27(1-3):737-740.
164. Leung A., Jones J., Czyzewska E., Chen J., Pascal M. Micromachined accelerometer with no proof mass. International Electron Devices Meeting, 1997. Technical Digest 1997, 899-902.
165. Leung A., Jones J., Czyzewska E., Chen J., Woods B. Micromachined accelerometer based on convection heat transfer. Proc. 11th Annu. Int. Workshop Micro Electro Mechanical Systems 1998 (MEMS 98) 1998, 627-630.
166. Li Y., Baek K., Gulari M., Lin D., Wise K. A vacuum-isolated thermal microflowmeter for in-vivo drug delivery. Sensors, 2005 IEEE 2005, 668-671.
167. CRC Handbook of Chemistry and Physics 2006, CRC Press, Boca Raton, FL. 87th edn. D.R. Lide (Ed.).
168. Lin L., Jones J. A liquid-filled buoyancy-driven convective micromachined accelerometer. J. Microelectromech. Syst. 2005, 14(5):1061-1069.
169. Lin K.M., Kwok C., Huang R.S. Integrated thermo-capacitive type MOS flow sensor. IEEE Electron. Device Lett. 1996, 17(5):247-249.
170. Lin Q., Jiang F., Wang X.-Q., Han Z., Tai Y.-C., Lew J., Ho C.-M. MEMS thermal shear stress sensors: Experiments, theory and modeling. Technical Digest. Solid-State Sensor and Actuator Workshop (TRF) 2000, 304-307.
171. Lin Q., Jiang F., Wang X., Xu Y., Han Z., Tai Y., Lew J., Ho C. Experiments and simulations of MEMS thermal sensors for wall shear-stress measurements in aerodynamic control applications. Journal of Micromechanics and Microengineering 2004, 14(12):1640-1649.
172. Liu B., Lai P., Xueren Z., Zhaohui W., Bin L. A two-dimensional flow sensor using integrated silicon spreading-resistance temperature detectors. Rev. Sci. Instrum. 1997, 68(10):3785-3789.
173. Liu C., Tai Y., Huang J., Ho C. Surface micromachined thermal shear stress sensor. Proceedings of the 1994 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers 1994, Vol. 197:9-15. Fluids Engineering Division (Publication) FED, New York, NY, USA.
174. Liu C., Huang J., Zhu Z., Jiang F., Tung S., Tai Y., Ho C. Micromachined flow shear-stress sensor based on thermal transfer principles. Journal of Microelectromechanical Systems 1999, 8(1):90-99.
175. Löfdahl L., Gad-el Hak M. MEMS applications in turbulence and flow control. Progr. Aerospace Sci. 1999, 35(2):101-203.
176. Löfdahl L., Gad-el Hak M. MEMS-based pressure and shear stress sensors for turbulent flows. Meas. Sci. Technol. 1999, 10(8):665-686.
177. Löfdahl L., Stemme G., Johansson B. A sensor based on silicon technology for turbulence measurements. J. Phys. E Sci. Instrum. 1989, 22(6):391-393.
178. Löfdahl L., Stemme G., Johansson B. Turbulence measurements using sensors based on silicon technology. ICIASF '89 Record. Int. Congr. Instrum. Aerospace Simul. Facilities 1989, 95-103.
179. Löfdahl L., Stemme G., Johansson B. Silicon based flow sensors used for mean velocity and turbulence measurements. Exp. Fluids 1992, 12(4-5):270-276.
180. Löfdahl L., Chernoray V., Haasl S., Stemme G., Sen M. Characteristics of a hot-wire microsensor for time-dependent wall shear stress measurements. Exp. Fluids 2003, 35(3):240-251.
181. Luo X.B., Yang Y.J., Zheng F., Li Z.X., Guo Z.Y. An optimized micromachined convective accelerometer with no proof mass. J. Micromech. Microeng. 2001, 11(5):504-508.
182. Luo X., Li Z., Guo Z., Yang Y. Thermal optimization on micromachined convective accelerometer. Heat Mass Transf./Waerme- und Stoffuebertragung 2002, 38(7-8):705-712.
183. Lyons C., Friedberger A., Welser W., Muller G., Krotz G., Kassing R. A high-speed mass flow sensor with heated silicon carbide bridges. Proc. MEMS 98. IEEE. 11th Annu. Int. Workshop Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems 1998, 356-360.
184. Ma Y., Ma S., Fang W., Wang T. Air-flow sensor and humidity sensor application to neonatal infant respiration monitoring. Sens. Actuators A Phys. 1995, 49(1-2):47-50.
185. MacHattie L. The transistor as an anemometer. J. Phys. E (Sci. Instrum.) 1979, 12(8):754-760.
186. Mailly F., Giani A., Bonnot R., Temple-Boyer P., Pascal-Delannoy F., Foucaran A., Boyer A. Anemometer with hot platinum thin film. Sens. Actuators A Phys. 2001, 94(1-2):32-38.
187. Makinwa K., Huijsing J. Constant power operation of a two-dimensional flow sensor. IEEE Trans. Instrum. Meas. 2002, 51(4):840-844.
188. Makinwa K.A.A., Huijsing J.H. A smart wind sensor using thermal sigma-delta modulation techniques. Sens. Actuators A Phys. 2002, 97-98:15-20.
189. Makinwa K., Huijsing J., Hagedoorn A. Industrial design of a solid-state wind sensor. Sensor for Industry, 2001, Proceedings of the First ISA/IEEE Conference 2001, 68-71.
190. Malcovati P., Häberli A., Mayer F., Paul O., Maloberti F., Baltes H. Combined air humidity and flow CMOS microsensor with on-chip 15 bit sigma-delta A/D interface. IEEE Symp. VLSI Circuits, Dig. Tech. Pap. 1995, 45-46.
191. Marshall D.C. Measurement of sap flow in conifers by heat transport. Plant Physiol. 1958, 33(6):385-396.
192. Mastrangelo C., Muller R. A constant-temperature gas flowmeter with a silicon micromachined package. 1988 Solid State Sensor and Actuator Workshop. Technical Digest 1988, 43-46.
193. Mayer F., Paul O., Baltes H. Influence of design geometry and packaging on the response of thermal CMOS flow sensors. 8th Int. Conf. Solid-State Sensors and Actuators and Eurosensors IX. Dig. Tech. Pap. 1995, Vol. 1:528-531.
194. Mayer F., Hintermann M., Jacobs H., Paul O., Baltes H. Thermoelectric CMOS anemometers. Proc. SPIE - Int. Soc. Opt. Eng. 1996, 2882:236-246.
195. Meijer G. Thermal sensors based on transistors. Sens. Actuators 1986, 10(1-2):103-125.
196. Merkel T., Graeber M., Pagel L. A new technology for fluidic microsystems based on PCB technology. Sens. Actuators A (Phys.) 1999, A77(2):98-105.
197. Merkel T., Pagel L., Glock H.-W. Electric fields in fluidic channels and sensor applications with capacitance. Sens. Actuators A (Phys.) 2000, A80(1):1-7.
198. Mierij Meteo B V 2006 Solid-state wind sensor MMW 005, product data sheet. Online resource, access date June 2006: http://www.mierijmeteo.nl/.
199. Milanovic V., Bowen E., Tea N., Suehle J., Payne B., Zaghloul M., Gaitan M. Convection-based accelerometer and tilt sensor implemented in standard CMOS. Micro-Electro-Mechanical Systems (MEMS) - 1998. ASME International Mechanical Engineering Congress and Exposition 1998, 487-490.
200. Mireles J.J. Micromachined sensor design for optical-fiber flow measurement. Sens. Rev. 2005, 25(1):33-39.
201. Mizuno Y., Liger M., Tai Y.-C. Nanofluidic flowmeter using carbon sensing element. 17th IEEE Int. Conf. Micro Electro Mechanical Systems 2004 (MEMS) 2004, 322-325.
202. Moser D., Baltes H. A high sensitivity CMOS gas flow sensor on a thin dielectric membrane. Sens. Actuators A Phys. 1993, 37-38:33-37.
203. Moser D., Lenggenhager R., Baltes H. Silicon gas flow sensors using industrial CMOS and bipolar IC technology. Sens. Actuators A Phys. 1991, 27(1-3):591-595.
204. Moser D., Lenggenhager R., Wachutka G., Baltes H. Fabrication and modelling of CMOS microbridge gas-flow sensors. Sens. Actuators B (Chem.) 1992, B6(1-3):165-169.
205. Mouroulis P., Wilson D., Maker P., Muller R. Convex grating types for concentric imaging spectrometers. Appl. Opt. 1998, 37(31):7200-7208.
206. Nagata M., Stevens M., Swart N., Dravia T., Nathan A. Optimization of two-element flow microsensors using quasi 3-D numerical electrothermal analysis. Sens. Actuators A Phys. 2001, 90(1-2):102-110.
207. Nakayama Y. Introduction to Fluid Mechanics 1999, Butterworth-Heinemann, Oxford.
208. Nanver L., Goudena E., van Zeijl H. Dimes-01, a baseline BIFET process for smart sensor experimentation. Sens. Actuators A (Phys.) 1993, A36(2):139-147.
209. Naqwi A., Petrik S. Fiber-optic dual-cylindrical wave sensor for measurement of wall velocity gradient in a fluid flow. Appl. Opt. 1993, 32(30):6128-6131.
210. Naqwi A.A., Reynolds W.C. Dual cylindrical wave laser Doppler method for measurement of skin friction in fluid flow. Tech. Rep 1987, Stanford University.
211. Naqwi A., Reynolds W. Measurement of turbulent wall velocity gradients using cylindrical waves of laser light. Exp. Fluids 1991, 10(5):257-266.
212. Naughton J.W., Sheplak M. Modern developments in shear-stress measurement. Prog. Aerospace Sci. 2002, 38(6-7):515-570.
213. Neda T., Nakamura K., Takumi T. A polysilicon flow sensor for gas flow meters. Sens. Actuators A Phys. 1996, 54(1-3):626-631.
214. Ng K.-Y., Shajii J., Schmidt M.A. A liquid shear-stress sensor fabricated using wafer bonding technology. Solid-State Sensors and Actuators 1991 Digest of Technical Papers, TRANSDUCERS '91 1991, 931-934.
215. Nguyen N., Kiehnscherf R. Low-cost silicon sensors for mass flow measurement of liquids and gases. Sens. Actuators A (Phys.) 1995, A49(1-2):17-20.
216. Nguyen N., Meng A., Black J., White R. Integrated flow sensor for in situ measurement and control of acoustic streaming in flexural plate wave micropumps. Sens. Actuators A (Phys.) 2000, A79(2):115-121.
217. Nishimoto T., Shoji S., Esashi M. Buried piezoresistive sensors by means of MeV ion implantation. Sens. Actuators A (Phys.) 1994, A43(1-3):249-253.
218. Norlin P., Ohman O., Ekstrom B., Forssen L. A chemical micro analysis system for the measurement of pressure, flow rate, temperature, conductivity, UV-absorption and fluorescence. Sens. Actuators B (Chem.) 1998, B49(1-2):34-39.
219. Oda S., Anzai M., Uematsu S., Watanabe K. A silicon micromachined flow sensor using thermopiles for heat transfer measurements. IEEE Trans. Instrum. Meas. 2003, 52(4):1155-1159.
220. Ohnstein T., Johnson R., Higashi R., Burns D., Holmen J., Satren E., Johnson G., Bicking R., Johnson S. Environmentally rugged, wide dynamic range microstructure airflow sensor. Technical Digest. IEEE Solid-State Sensor and Actuator Workshop 1990, 158-160.
221. Oosterbroek R., Lammerink T., Berenschot J., van den Berg A., Elwenspoek M. Designing, realization and characterization of a novel capacitive pressure/flow sensor. Tranducers 97. 1997 Int. Conf. Solid-State Sensors and Actuators. Dig. Tech. Pap. 1997, Vol. 1:151-154.
222. Oosterbroek R., Lammerink T., Berenschot J., Krijnen G., Elwenspoek M., van den Berg A. A micromachined pressure/flow-sensor. Sens. Actuators A (Phys.) 1999, A77(3):167-177.
223. van Oudheusden B., Huijsing J. Integrated flow friction sensor. Sens. Actuators 1988, 15(2):135-144.
224. van Oudheusden B., Huijsing J. An electronic wind meter based on a silicon flow sensor. Sens. Actuators A (Phys.) 1990, A22(1-3):420-424.
225. van Oudheusden B., de Bruijn J., Hoogeboom P., Beaufort D., Huijsing J. Integrated sensor for non-invasive monitoring of flow in pipes. Sens. Actuators 1989, 18(3-4):259-267.
226. Ozaki Y., Ohyama T., Yasuda T., Shimoyama I. An air flow sensor modeled on wind receptor hairs of insects. Proc. IEEE 13th Annu. Int. Conf. Micro Electro Mechanical Systems 2000, 531-536.
227. Padmanabhan A., Goldberg H., Breuer K., Schmidt M. A silicon micromachined floating element shear-stress sensor with optical position sensing by photodiodes. 8th Int. Conf. Solid-State Sensors and Actuators and Eurosensors IX. Dig. Tech. Pap. 1995, Vol. 2:436-439.
228. Padmanabhan A., Sheplak M., Breuer K., Schmidt M. Micromachined sensors for static and dynamic shear-stress measurements in aerodynamic flows. Tranducers 97. 1997 Int. Conf. Solid-State Sensors and Actuators. Dig. Tech. Pap. 1997, Vol. 1:137-140.
229. Pagonis D.N., Kaltsas G., Nassiopoulou A.G. Fabrication and testing of an integrated thermal flow sensor employing thermal isolation by a porous silicon membrane over an air cavity. J. Micromech. Microeng. 2004, 14(6):793-797.
230. Pan T., Hyman D., Mehregany M., Reshotko E., Willis B. Calibration of microfabricated shear stress sensors. Int. Conf. Solid-State Sensors and Actuators, Proc. 1995, Vol. 2:443-446.
231. Pan T., Hyman D., Mehregany M., Reshotko E., Willis B. Characterization of microfabricated shear stress sensors. ICIASF '95 Record. Int. Congr. Instrumentation in Aerospace Simulation Facilities 1995, 6-11.
232. Pan T., Hyman D., Mehregany M., Reshotko E., Garverick S. Microfabricated shear stress sensors, part 1: Design and fabrication. AIAA J. 1999, 37(1):66-72.
233. Papageorgiou D., Bledsoe S., Gulari M., Hetke J., Anderson D., Wise K. A shuttered probe with in-line flowmeters for chronic in-vivo drug delivery. 14th IEEE Int. Conf. Micro Electro Mechanical Systems 2001 (MEMS 2001) 2001, 212-215.
234. von Papen T., Steffes H., Ngo H., Obermeier E. A micro surface fence probe for the application in flow reversal areas. Sens. Actuators A Phys. 2002, 97-98:264-270.
235. von Papen T., Buder U., Ngo H., Obermeier E. A second generation MEMS surface fence sensor for high resolution wall shear stress measurement. Sens. Actuators A (Phys.) 2004, A113(2):151-155.
236. Park H., Pak J.J., Son S.Y., Lim G., Song I. Fabrication of a microchannel integrated with inner sensors and the analysis of its laminar flow characteristics. Sens. Actuators A Phys. 2003, 103(3):317-329.
237. Park S., Kim S., Kim S., Kim Y. A flow direction sensor fabricated using MEMS technology and its simple interface circuit. Sens. Actuators B (Chem.) 2003, B91(1-3):347-352.
238. Perichon S., Roussel P., Lysenko V., Remaki B., Barbier D., Tritto J., Delhomme G., Dittmar A. Micro-blood flow measurement using thermal conductivity micro-needles: A new CMOS compatible manufacturing process onto porous silicon. Proc. 1st Annu. Int. IEEE-EMBS Spec. Top. Conf. Microtechnologies in Medicine and Biology 2000, 184-187.
239. Persson B., Tartaglino U., Tosatti E., Ueba H. Electronic friction and liquid-flow-induced voltage in nanotubes. Phys. Rev. B (Condens. Matter Mater. Phys.) 2004, 69(23):235410-235411.
240. Pfann W., Thurston R. Semiconducting stress transducers utilizing the transverse and shear piezoresistance effects. J. Appl. Phys. 1961, 32(10):2008-2019.
241. Pijls N.H., De Bruyne B., Sith L., Aarnoudse W., Barbato E., Bartunek J., Bech G.J.W., Frans V.D.V. Coronary thermodilution to assess flow reserve: Validation in humans. Circulation 2002, 105:2482-2486.
242. Platzer G E J 1976 Solid state fluid flow sensor. Tech. Rep. US Pat. 3 992 940, Southfield, MI.
243. Plöchinger H. Neigungs- und beschleunigungs- sensor. Tech. Rep. German Pat. 1994, 40 34 962 C1.
244. Poghossian A., Berndsen L., Schoening M. Chemical sensor as physical sensor: ISFET-based flow-velocity, flow-direction and diffusion-coefficient sensor. Sens. Actuators B (Chem.) 2003, B95(1-3):384-390.
245. Poghossian A., Schultze J., Schoening M. Multi-parameter detection of (bio-)chemical and physical quantities using an identical transducer principle. Sens. Actuators B Chem. 2003, 91(1-3):83-91.
246. Polla D., Muller R., White R. Monolithic integrated zinc-oxide on silicon pyroelectric anemometer. International Electron Devices Meeting 1983. Technical Digest 1983, 639-642.
247. van Putten A. An integrated silicon double bridge anemometer. Sens. Actuators 1983, 4(3):387-396.
248. van Putten A.F.P. A constant voltage constant current Wheatstone bridge configuration. Sens. Actuators 1988, 13(2):103-115.
249. van Putten A., Middelhoek S. Integrated silicon anemometer. Electron. Lett. 1974, 10(21):425-426.
250. van Putten M., van Putten M., van Putten A., Pompe J., Bruining H. A silicon bidirectional flow sensor for measuring respiratory flow. IEEE Trans. Biomed. Eng. 1997, 44(2):205-208.
251. Qiu L., Hein S., Obermeier E., Schubert A. Micro gas-flow sensor with integrated heat sink and flow guide. Sens. Actuators A Phys. 1996, 54(1-3):547-551.
252. Quandt E. MEMS actuators based on smart film materials. Proc. SPIE - Int. Soc. Opt. Eng. 1998, 3514:136-146.
253. Radhakrishnan S., Lal A. Scalable microbeam flowsensors with electronic readout. J. Microelectromech. Syst. 2005, 14(5):1013-1022.
254. Rahnamai H., Zemel J. Pyroelectric anemometers: Preparation and flow velocity measurements. Sens. Actuators 1981, 2(1):3-16.
255. Rapoport S.D., Reed M.L. Fabrication and testing of a microdynamic rotor for blood flow measurements. J. Micromech. Microeng. 1991, 1(1):60-65.
256. Rasmussen A., Gaitan M., Locascio L., Zaghloul M. Fabrication techniques to realize CMOS-compatible microfluidic microchannels. J. Microelectromech. Syst. 2001, 10(2):286-297.
257. Rebiere D., Dejous C., Pistre J., Aucouturier J.-L., Tiret C., Planade R. Acoustic wave devices to measure gas flow: Comparison between surface acoustic wave (SAW) and shear horizontal acoustic plate mode (SH-APM) oscillators. Sens. Actuators A Phys. 1994, 42(1-3):384-388.
258. Richter A., Plettner A., Hofmann K., Sandmaier H. Electrohydrodynamic pumping and flow measurement. Proceedings. IEEE Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots 1991, 271-276.
259. Richter M., Wackerle M., Woias P., Hillerich B. A novel flow sensor with high time resolution based on differential pressure principle. Tech. Dig. IEEE Int. MEMS 99 Conf. 12th IEEE Int. Conf. Micro Electro Mechanical Systems 1999, 118-123.
260. Robadey J., Paul O., Baltes H. Two-dimensional integrated gas flow sensors by CMOS IC technology. J. Micromech. Microeng. 1995, 5(3):243-250.
261. Rodrigues R., Furlan R. Design of microsensor for gases and liquids flow measurements. Microelectron. J. 2003, 34(5-8):709-711.
262. Rouhanizadeh M., Soundararajan G., Lo R., Arcas D., Browand F., Hsiai T. MEMS sensors to resolve spatial variations in shear stress in a 3-d blood vessel bifurcation model. IEEE Sens. J. 2006, 6(1):78-88.
263. Sabate N., Santander J., Fonseca L., Gracia I., Cane C. Multi-range silicon micromachined flow sensor. Sens. Actuators A Phys. 2004, 110(1-3):282-288.
264. Schmid U. A robust flow sensor for high pressure automotive applications. Sens. Actuators A Phys. 2002, 97-98:253-263.
265. Schmidt M., Howe R., Senturia S., Haritonidis J. Fabrication and testing of a micromachined shear sensor. 1987 International Electron Devices Meeting, IEDM. Technical Digest 1987, 282-285.
266. Schmitz G.J., Brücker C., Jacobs P. Manufacture of high-aspect-ratio micro-hair sensor arrays. J. Micromech. Microeng. 2005, 15(10):1904-1910.
267. Schoening M.J., Poghossian A., Luth H., Schultze J. Field-effect based multifunctional hybrid sensor module for the determination of both (bio-)chemical and physical parameters. Proc. SPIE - Int. Soc. Opt. Eng. 2001, 4576:149-159.
268. Sheplak M., Chandrasekaran V., Cain A., Nishida T., Cattafesta L. Characterization of a silicon-micromachined thermal shear-stress sensor. AIAA J. 39th Aerospace Sci. Meet. 2002, 40(6):1099-1104.
269. Sheplak M, Cattafesta L, Nishida T 2004 MEMS shear stress sensors: Promise and progress. 24th AIAA Aerodynamic Measurement Technology and Ground Testing Conference, Portland, OR, USA, June 28 - July 1, 2004.
270. Shida K., Yuji J. Discrimination of material property by pressure-conductive rubber sheet sensor with multi-sensing function. Proc. IEEE Int. Symp. Industrial Electronics 1996 ISIE '96 1996, Vol. 1:54-59.
271. Shin W.C., Besser R.S. A micromachined thin-film gas flow sensor for microchemical reactors. J. Micromech. Microeng. 2006, 16(4):731-741.
272. Shoji S., Esashi M. Micro flow devices. Proc. Int. Symp. Micromechatronics and Human Science 1994, 89-95.
273. Sood A.K., Ghosh S. Direct generation of a voltage and current by gas flow over carbon nanotubes and semiconductors. Phys. Rev. Lett. 2004, 93(8):086601.1.
274. Sood A.K., Ghosh S., Das A. Flow-driven voltage generation in carbon nanotubes. Pramana J. Phys. 2005, 65(4):571-579.
275. Spalding D. A single formula for the law of the wall. Trans ASME Ser. A J. Appl. Mech. 1961, 28(3):444-458.
276. Stemme G. A monolithic gas flow sensor with polyimide as thermal insulator. IEEE Trans. Electron. Devices 1986, ED-33(10):1470-1474.
277. Stemme G. A CMOS integrated silicon gas-flow sensor with pulse-modulated output. Sens. Actuators 1988, 14(3):293-303.
278. Stenberg M., Stemme G., Kittilsland G., Pedersen K. A silicon sensor for measurement of liquid flow and thickness of fouling biofilms. Sens. Actuators 1988, 13(3):203-221.
279. Stephan C., Zanini M. A micromachined, silicon mass-air-flow sensor for automotive applications. 1991 Int. Conf. Solid-State Sensors and Actuators 1991. Dig. Tech. Pap., TRANSDUCERS '91 1991, 30-33.
280. Steurer J., Kohl F. Adaptive controlled thermal sensor for measuring gas flow. Sens. Actuators A (Phys.) 1998, A65(2-3):116-122.
281. Su Y., Evans A., Brunnschweiler A. Micromachined silicon cantilever paddles with piezoresistive readout for flow sensing. J. Micromech. Microeng. 1996, 6(1):69-72.
282. Su Y., Evans A., Brunnschweiler A., Ensell G. Characterization of a highly sensitive ultrathin piezoresistive silicon cantilever probe and its application in gas flow velocity sensing. J. Micromech. Microeng. 2002, 12(6):780-785.
283. Sultan M.F., Harrington C.R., Hile J.W. Differential ac anemometer. Tech. rep 1993, General Motors Corporation, Detroit, MI.
284. Sundeen J., Buchanan R. Thermal sensor properties of cermet resistor films on silicon substrates. Sens. Actuators A (Phys.) 2001, A90(1-2):118-124.
285. Svedin N., Kalvesten E., Stemme E., Stemme G. Lift-force flow sensor designed for acceleration insensitivity. Sens. Actuators A Phys. 1998, 68(1-3 pt 2):263-268.
286. Svedin N., Kalvesten E., Stemme E., Stemme G. A new silicon gas-flow sensor based on lift force. J. Microelectromech. Syst. 1998, 7(3):303-308.
287. Svedin N., Kalvesten E., Stemme G. A lift force sensor with integrated hot-chips for wide range flow measurements. Sens. Actuators A (Phys.) 2003, A109(1-2):120-130.
288. Svedin N., Kälvesten E., Stemme G. A new edge-detected lift force flow sensor. J. Microelectromech. Syst. 2003, 12(3):344-354.
289. Svedin N., Stemme E., Stemme G. A static turbine flow meter with a micromachined silicon torque sensor. J. Microelectromech. Syst. 2003, 12(6):937-946.
290. Tabata O. Fast-response silicon flow sensor with an on-chip fluid temperature sensing element. IEEE Trans. Electron. Devices 1986, ED-33(3):361-365.
291. Tabata O., Inagaki H., Igarashi I. Monolithic pressure-flow sensor. IEEE Trans. Electron. Devices 1987, 34(12):2456-2462.
292. Tadigadapa S., Tsai C., Zhang Y., Najafi N. Micromachined fluidic apparatus. Tech. Rep. US Pat. 6 477 901 2002, Integrated Sensing Systems Inc., US.
293. Tai Y.-C., Muller R. Lightly-doped polysilicon bridge as a flow meter. Sens. Actuators 1988, 15(1):63-75.
294. Takahata K., Gianchandani Y. Micromachined intraluminal devices for active and passive electromagnetic measurements of flow. 18th IEEE Int. Conf. Micro Electro Mechanical Systems 2005 (MEMS 2005) 2005, 863-866.
295. Takahata K., DeHennis A., Wise K., Gianchandani Y. A wireless microsensor for monitoring flow and pressure in a blood vessel utilizing a dual-inductor antenna stent and two pressure sensors. 17th IEEE Int. Conf. Micro Electro Mechanical Systems 2004, 216-219.
296. Tan Z., Shikida M., Hirota M., Sato K. Characteristics of on-wall in-tube thermal flexible mass-flow sensors. 19th IEEE Int. Conf. Micro Electro Mechanical Systems 2006 (MEMS 2006) 2006, 622-625.
297. Tanase D., Goosen J.F., Trimp P.J., French P.J. Multi-parameter sensor system with intravascular navigation for catheter/guide wire application. Sens. Actuators A Phys. 2002, 97-98:116-124.
298. Thürlemann B. Methode zur elektrischen Geschwindigkeitsmessung in Flüssigkeiten. Helv. Phys. Acta 1941, 14(5-6):383-419.
299. Thürlemann B. On the electromagnetic speed measurement of fluid. Helv. Phys. Acta 1955, 28:483.
300. Toda K., Sanemasa I., Ishikawa K. Simple temperature compensation of thermal air-flow sensor. Sens. Actuators A Phys. 1996, 57(3):197-201.
301. Tombler T.W., Zhou C., Alexseyev L., Kong J., Dai H., Liu L., Jayanthi C.S., Tang M., Wu S.-Y. Reversible electromechanical characteristics of carbon nanotubes under local-probe manipulation. Nature 2000, 405(6788):769-772.
302. Tong Q.-Y., Huang J.-B. A novel CMOS flow sensor with constant chip temperature (CCT) operation. Sens. Actuators 1987, 12(1):9-21.
303. Trautweiler S., Paul O., Stahl J., Baltes H. Anodically bonded silicon membranes for sealed and flush mounted microsensors. IEEE, 9th Annu. Int. Workshop Micro Electro Mechanical Systems, 1996 (MEMS '96), Proceedings. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems 1996, 61-66.
304. Tseng F.-G., Lin C.-J. Polymer MEMS-based Fabry-Perot shear stress sensor. IEEE Sens. J. 2003, 3(6):812-817.
305. Tung S., Maines B., Jiang F., Tsao T. Development of a MEMS-based control system for compressible flow separation. J. Microelectromech. Syst. 2004, 13(1):91-99.
306. Van Der Schoot B., Boillat M., De Rooij N. Micro-instruments for life science research. IEEE Trans. Instrum. Meas. 2001, 50(6):1538-1542.
307. Vass G. Ultrasonic flowmeter basics. Sensors 1997, 14(10):73-78.
308. Verhoeven H.J., Huijsing J.H. An integrated gas flow sensor with high sensitivity, low response time and a pulse-rate output. Sens. Actuators A Phys. 1994, 41(1-3):217-220.
309. Weiping Y., Chong L., Jianhua L., Lingzhi M., Defang N. Thermal distribution microfluidic sensor based on silicon. Sens. Actuators B Chem. 2005, 108(1-2 Spec Iss):943-946.
310. Wenzel S., White R. A multisensor employing an ultrasonic Lamb-wave oscillator. IEEE Trans. Electron. Devices 1988, 35(6):735-743.
311. van der Wiel A.J., Linder C., de Rooij N.F., Bezinge A. A liquid velocity sensor based on the hot-wire principle. Sens. Actuators A Phys. 1993, 37-38:693-697.
312. van der Wiel A., Boillat M., de Rooij N. A bi-directional silicon orifice flow sensor characterised for fluid temperature and pressure. 8th Int. Conf. Solid-State Sensors and Actuators and Eurosensors IX. Dig. Tech. Pap. 1995, Vol. 2:420-423.
313. Wilson D., Maker P., Muller R. Binary optic reflection grating for an imaging spectrometer. Proc. SPIE - Int. Soc. Opt. Eng. 1996, 2689:255-266.
314. Wu J., Sansen W. Electrochemical time of flight flow sensor. Sens. Actuators A (Phys.) 2002, A97-98:68-74.
315. Wu S., Lin Q., Yuen Y., Tai Y.-C. MEMS flow sensors for nano-fluidic applications. Sens. Actuators A (Phys.) 2001, A89(1-2):152-158.
316. Xie J., Shih J., Tai Y.-C. Integrated surface-micromachined mass flow controller. IEEE 16th Annu. Int. Conf. Micro Electro Mechanical Systems 2003 (MEMS-03) 2003, 20-23.
317. Xu Y., Lin Q., Lin G., Katragadda R., Jiang F., Tung S., Tai Y.-C. Micromachined thermal shear-stress sensor for underwater applications. J. Microelectromech. Syst. 2005, 14(5):1023-1030.
318. Xu Y., Chiu C., Jiang F., Lin Q., Tai Y. A MEMS multi-sensor chip for gas flow sensing. Sensors and Actuators A: Physical 2005, 121(1):253-261.
319. Yang C., Soeberg H. Monolithic flow sensor for measuring millilitre per minute liquid flow. Sens. Actuators A Phys. 1992, 33(3):143-153.
320. Yoon E., Wise K. Dielectrically-supported multi-element mass flow sensor. Technical Digest - International Electron Devices Meeting 1988, 670-673.
321. Yoon E., Wise K. An integrated mass flow sensor with on-chip CMOS interface circuitry. IEEE Trans. Electron. Devices 1992, 39(6):1376-1386.
322. Yoon H.J., Kim S.Y., Lee S.W., Yang S.S. Fabrication of a micro electromagnetic flow sensor for micro flow rate measurement. Proc. SPIE - Int. Soc. Opt. Eng. 2000, 3990:264-271.
323. Yoshino T., Suzuki Y., Kasagi N., Kamiunten S. Assessment of the wall shear stress measurement with arrayed micro hot-film sensors in a turbulent channel flow. Proc. 2nd Int. Symp. Turbulence and Shear Flow Phenomena 2001, Vol. 2:153-158.
324. Yoshino T., Suzuki Y., Kasagi N., Kamiunten S. Optimum design of micro thermal flow sensor and its evaluation in wall shear stress measurement. Proc. IEEE Micro Electro Mechanical Systems (MEMS) 2003, 193-196.
325. Yu D., Hsieh H., Zemel J. Microchannel pyroelectric anemometer. Sens. Actuators A (Phys.) 1993, A39(1):29-35.
326. Zemel J N, Rahnamai H 1980 Pyroelectric anemometer. Tech. Rep. US Pat. 4 332 157,University of Pennsylvania (USA).
327. Zhang L., Ye X., Zhou Z., Yao J. A micromachined single-crystal silicon flow sensor with a cantilever paddle. 1997 Int. Symp. Micromechanics and Human Science 1997, 225-229.
328. Zhang Y., Tadigadapa S., Najafi N. A micromachined Coriolis-force-based mass flowmeter for direct mass flow and fluid density measurement. TRANSDUCERS '01. EUROSENSORS XV. 11th Int. Conf. Solid-State Sensors and Actuators. Dig. Tech. Pap. 2001, Vol. 2:1460-1463.
329. Zhe J., Modi V., Farmer K.R.J. A microfabricated wall shear-stress sensor with capacitative sensing. J. Microelectromech. Syst. 2005, 14(1):167-175.
330. Zou J., Chen J., Liu C., Schutt-Aine J. Plastic deformation magnetic assembly (PDMA) of out-of-plane microstructures: Technology and application. J. Microelectromech. Syst. 2001, 10(2):302-309.