MEMS applications in turbulence and flow control

Progress in Aerospace Sciences

Volumn 35, Issue 2, 1999, Pages 101-203

  Löfdahl, Lennart ^a   Gad el Hak, Mohamed ^b  

^a CHALMERS UNIVERSITY OF TECHNOLOGY   (Sweden)

^b University of Notre Dame   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

FLOW CONTROL; MICROACTUATORS; MICROSENSORS; REYNOLDS NUMBER; SHEAR FLOW; TURBULENT FLOW; WALL FLOW;

REACTIVE CONTROL SYSTEMS; SENSOR ARRAYS;

MICROELECTROMECHANICAL DEVICES;

EID: 0033076350     PISSN: 03760421     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0376-0421(98)00012-8     Document Type: Article

References (240)

1. Petersen KE. Silicon as a mechanical material. Proc IEEE 70. 1982:420-57.
2. Linder C, Paratte L, Grétillat M, Jaecklin V, de Rooij N. Surface micromachining. J Micromech Microengng 1992;2:122-32.
3. Bryzek J, Peterson K, McCulley W. Micromachines on the March. IEEE Spectrum 1994;31:20-31.
4. Diem B, Rey P, Renard S, Viollet P, Bosson M, Bono H, Michel F, Delaye M, Delapierre G. SOI 'SIMOX'; from bulk to surface micromachining, a new age for silicon sensors and actuators. Sensors Actuators A 1995;46-47:8-16.
5. Tien NC. Silicon micromachined thermal sensors and actuators. Microscale Thermophysical Engng 1997;1:275-92.
6. Gad-el-Hak M. The fluid mechanics of microdevices. J Fluids Engng, 1999, to appear in vol. 121(1).
7. Tennekes H, Lumley JL. A first course in turbulence. Cambridge, MA: MIT Press, 1972.
8. Hinze JO. Turbulence, 2nd ed. New York: McGraw-Hill, 1975.
9. Speziale CG. Analytical methods for the development of Reynolds stress closures in turbulence. Ann Rev Fluid Mech 1991;23:107-57.
10. Speziale CG, Sarkar S, Gatski TB. Modelling the pressure-strain correlation of turbulence: an invariant dynamical system approach. J Fluid Mech 1991;227:245-72.
11. Hallbäck M. Development of Reynolds stress closures of homogenous turbulence through physical and numerical experiments. Ph.D. Thesis, Royal Institute of Technology, Department of Mechanics, TRITA MEK, 1993:3.
12. Goldstein ME. Aeroacoustics. New York: McGraw-Hill, 1976.
13. Dowling AP, Ffowcs-Williams JE. Sound and sources of sound. New York: Wiley, 1983.
14. Blake WK. Mechanics of flow-induced sound and vibration. New York: Academic Press, 1986.
15. Wilkinson SP. Interactive wall turbulence control. In: Bushnell DM, Hefner JN, editors. Viscous drag reduction in boundary layers, Progress in astronautics and aeronautics. Washington, DC: AIAA, 1990;123:479-509.
16. Gad-el-Hak M. Interactive control of turbulent boundary layers: a futuristic overview, AIAA J 1994;32:1753-65.
17. Gad-el-Hak M. Modern developments in flow control. Appl Mech Rev 1996;49:365-79.
18. Gad-el-Hak M. Frontiers of flow control. In: Gad-el-Hak M, Pollard A, Bonnet JP, editors. Flow control: fundamentals and practices, Lecture Notes in Physics, vol. 53. Berlin: Springer, 1998:109-53.
19. Moin P, Bewley T. Feedback control of turbulence. Appl Mech Rev 1994;47:S3-13.
20. Gad-el-Hak M, Pollard A, Bonnet JP. Flow control - fundamentals and practices. Berlin: Springer, 1998.
21. Gad-el-Hak M. Flow control. London UK: Cambridge University Press, 1999.
22. O'Connor L. MEMS: micromechanical systems. Mech Engng 1992;114:40-7.
23. Pister KSJ, Judy SR, Burgett SR, Fearing RS. Micro-fabricated hinges. Sensors Actuators A 1992;33:249-56.
24. Tien NC, Kiang MH, Daneman MJ, Solgaard O, Lau KY, Müller RS. Actuation of polysilicon surface-micromachined mirrors. Proc SPIE (Miniaturized System with Micro-Optical and Micromechanics). San Jose, CA, 30-31 January, 1996;2687:53-9.
25. Tien NC, Solgaard O, Kiang MH, Daneman MJ, Lau KY, Müller RS. Surface micromachined mirrors for laser beam positioning. Sensors Actuators A 1996;52:76-80.
26. Ehrfeld W, Götz F, Münchmeyer D, Schleb W, Schmidt D. LIGA process: sensor construction techniques via X-ray lithography. Technical digest, solid-state sensor and actuator workshop, Hilton Head, South Carolina, 6-9 June 1988:1-4.
27. Keller CG, Howe RT. Nickel-filled hexsil thermally actuated tweezers. In: 8 Int Conf on Solid-State Sensors and Actuators and Eurosensors-9, Digest of Technical Papers. Stockholm, Sweden, 1995;2:376-9.
28. Israelachvili JN. Intermolecular and surface forces, 2nd ed. New York: Academic Press, 1991.
29. Knudsen M. Die Gesetze der Molekularströmung und der inneren Reibungsströmung der Gase durch Röhren. Ann Phys 1909;28:75-130.
30. Townsend AA. The structure of turbulent shear flows, 2nd ed. London: Cambridge University Press, 1976.
31. Monin AS, Yaglom AM. Statistical fluid mechanics: mechanics of turbulence, vols 1 and 2. Cambridge, MA: MIT Press, 1975.
32. McComb WD. The physics of fluid turbulence. Clarendon Press, Oxford, UK, 1990.
33. Lesieur M. Turbulence in Fluids, 2nd ed. Dordrecht, The Netherlands: Kluwer, 1991.
34. Holmes P, Lumley J, Berkooz G. Turbulence, coherent structures, dynamical systems and symmetry. London: Cambridge University Press, 1996.
35. Kolmogorov AN. Local structure of turbulence in an incompressible fluid at very high Reynolds numbers. Dokl Akad Nauk SSSR 1941;30:299-303.
36. Kolmogorov AN. Energy dissipation in locally isotropic turbulence. Dokl Akad Nauk SSSR 1941;32:19-21.
37. Taylor GI. Statistical theory of turbulence. Proc Roy Soc London A 1935;151:421-78.
38. Corrsin S. Outline of some topics in homogenous turbulent flow. J Geophys Res 1959;64:2134-50.
39. Aronson D, Löfdahl L. The plane wake of a cylinder: an estimate of the pressure strain rate tensor. Phys Fluids 1994;6:2716-21.
40. Ligrani PM, Bradshaw P. Spatial resolution and measurements of turbulence in the viscous sublayer using subminiature hot-wire probes. Exp Fluids 1987;5:407-17.
41. Keith W, Hurdis D, Abraham B. A comparison of turbulent boundary layer wall-pressure spectra. J Fluids Engng 1992;114:338-47.
42. Gad-el-Hak M, Bandyopadhyay PR. Reynolds number effects in wall-bounded flows. Appl Mech Rev 1994;47:307-65.
43. Aronson D, Johansson AV, Löfdahl L. A shear-free turbulent boundary layer - experiments and modeling. J Fluid Mech 1997;338:363-85.
44. Ho CM, Tai YC. Review: MEMS and its applications for flow control. J Fluids Engng 1996;118:437-47.
45. Ho CM, Tai YC. Micro-electro-mechanical systems (MEMS) and fluid flows. Ann Rev Fluid Mech 1998;30:579-612.
46. Löfdahl L, Kälvesten E, Stemme G. Small silicon based pressure transducers for measurements in turbulent boundary layers. Exp Fluids 1994;17:24-31.
47. Löfdahl L, Kälvesten E, Stemme G. Small silicon pressure transducers for space-time correlation measurements in a flat plate boundary layer. J Fluids Engng 1996;118:457-63.
48. Gad-el-Hak M. Flow control. Appl Mech Rev 1989;42:261-93.
49. Fiedler HE, Fernholz HH. On management and control of turbulent shear flows. Prog Aerospace Sci 1990;27:305-87.
50. Bewley T, Moin P. Optimal control of turbulent channel flows. In: Wang, KW, Flotow AHV, Shoureshi R, Hendricks EW, Farabee TM, editors. Symp on Active/Passive Control of Flow Induced Noise and Vibrations. DE-vol. 75, New York: ASME, 1994:221-7.
51. Bandyopadhyay PR. Review - mean flow in turbulent boundary layers disturbed to alter skin friction. J Fluids Engng 1986;108:127-40.
52. Cantwell BJ. Organized motion in turbulent flow. Ann Rev Fluid Mech 1981;13:457-515.
53. Robinson SK. Coherent motions in the turbulent boundary layer. Ann Rev Fluid Mech 1991;23:601-39.
54. Gad-el-Hak M, Blackwelder RF. A drag reduction method for turbulent boundary layers. AIAA Paper No. 87-0358, AIAA, New York, 1987.
55. Gad-el-Hak M, Blackwelder RF. Selective suction for controlling bursting events in a boundary layer. AIAA J 1989;27:308-14.
56. Blackwelder RF, Gad-el-Hak M. Method and apparatus for reducing turbulent skin friction. United States Patent No. 4,932,612, 1990.
57. Lumley JL. Control of the wall region of a turbulent boundary layer. In: McMichael JM, editor. Turbulence: structure and control, Columbus, OH: Ohio State University, 1-3 April, 1991:61-2.
58. Lumley JL. Control of turbulence. AIAA paper No. 96-0001, AIAA, Washington, DC, 1996.
59. Choi H, Moin P, Kim J. Turbulent drag reduction: studies of feedback control and flow over riblets. Department of Mechanical Engineering Report No. TF-55, Stanford University, Stanford, CA, 1992.
60. Choi H, Moin P, Kim J. Active turbulence control for drag reduction in wall-bounded flows. J Fluid Mech 1994;262:75-110.
61. Reynolds WC. Sensors, actuators, and strategies for turbulent shear-flow control, invited oral presentation at the AIAA 3rd Flow Control Conf, Orlando, FL, 6-9 July, 1993.
62. Jacobson SA, Reynolds WC. Active control of boundary layer wall shear stress using self-learning neural networks. AIAA Paper No. 93-3272, AIAA, Washington, DC, 1993.
63. Jacobson SA, Reynolds WC. An experimental investigation towards the active control of turbulent boundary layers. Department of Mechanical Engineering Report No TF-64, Stanford University, Stanford, CA, 1995.
64. Jacobson SA, Reynolds WC. Active control of streamwise vortices and streaks in boundary layers. J Fluid Mech 1998;360:179-211.
65. McMichael JM. Progress and prospects for active flow control using microfabricated electromechanical systems (MEMS). AIAA Paper No. 96-0306, AIAA, Washington, DC, 1996.
66. Mehregany M, DeAnna RG, Reshotko E. Microelectromechanical systems for aerodynamics applications. AIAA Paper No. 96-0421, AIAA, Washington, DC, 1996.
67. Lumley J, Blossey P. Control of turbulence. Ann Rev Fluid Mech 1998;30:311-27.
68. Tsao T, Jiang F, Miller RA, Tai YC, Gupta B, Goodman R, Tung S, Ho CM. An integrated MEMS system for turbulent boundary layer control. Technical Digest (Transducers'97). 1997;1:315-8.
69. Ho CM, Tung S, Lee GB, Tai Y-C, Jiang F, Tsao T. MEMS - a technology for advancements in aerospace engineering. AIAA Paper No. 97-0545, AIAA, Washington, DC, 1997.
70. Berkooz G, Fisher M, Psiaki M. Estimation and control of models of the turbulent wall layer. Bull Amer Phys Soc 1993;38:2197.
71. Gad-el-Hak M. Innovative control of turbulent flows. AIAA Paper No. 93-3268, AIAA, New York, 1993.
72. Wadsworth DC, Muntz EP, Blackwelder RF, Shiflett GR. Transient energy release pressure driven microactuators for control of wall-bounded turbulent flows. AIAA Paper No. 93-3271, AIAA, Washington, DC, 1993.
73. Löfdahl L, Glavmo M, Johansson B, Stemme G. A silicon transducer for the determination of wall-pressure fluctuations in turbulent boundary layers. Appl Sci Res 1993;51:203-7.
74. Löfdahl L, Kälvesten E, Hadzianagnostakis T, Stemme G. An integrated silicon based pressure-shear stress sensor for measurements in turbulence flows. Symp on Application of Micro-Fabrication to Fluid Mechanics, ASME Winter Annual Meeting, Atlanta, GA, 17-22 November, 1994:245-53.
75. Carlson HA, Lumley JL. Flow over an obstacle emerging from the wall of a channel. AIAA J 1996;34:924-31.
76. Halsey TC, Martin JE. Electrorheological fluids. Sci Amer 1993;269:58-64.
77. Wiltse JM, Glezer A. Manipulation of free shear flows using piezoelectric actuators. J Fluid Mech 1993;249:261-85.
78. James RD, Jacobs JW, Glezer A. Experimental investigation of a turbulent jet produced by an oscillating surface actuator. Appl Mech Rev 1994;47:S127-31.
79. Vargo SE, Muntz, EP. A simple micromechanical compressor and vacuum pump for flow control and other distributed applications. AIAA Paper No. 96-0310, AIAA, Washington, DC, 1996.
80. Sen M, Wajerski D, Gad-el-Hak M. A novel pump for MEMS applications. ASME J Fluids Engng 1996;118:624-7.
81. Sharatchandra MC, Sen M, Gad-el-Hak M. Navier-Stokes simulations of a novel viscous pump. J Fluids Engng 1997;119:372-82.
82. Liepmann HW, Nosenchuck DM. Active control of laminar-turbulent transition. J Fluid Mech 1982;118:201-4.
83. Liepmann HW, Brown GL, Nosenchuck DM. Control of laminar instability waves using a new technique. J Fluid Mech 1982;118:187-200.
84. King LV. On the convection of heat from small cylinders in a stream of fluid: determination of the convection constants of small platinum wires, with applications to hot-wire anemometry. Philos Trans Roy Soc London A 1914;214:373-432.
85. King LV. On the precision measurement of air velocity by means of the linear hot-wire anemometer. Philos Mag J Sci Sixth Ser 1915;29:556-77.
86. King LV. The linear hot-wire anemometer and its applications in technical physics. J Franklin Inst 1916;181:1-25.
87. Dryden HL, Kuethe AM. The measurement of fluctuations of air speed by the hot-wire anemometer. NACA Technical Report No. NACA-TR-320, Washington, DC, 1930.
88. Comte-Bellot G. Hot-wire anemometry. Ann Rev Fluid Mech 1976;8:209-31.
89. Freymuth P. History of thermal anemometry. In: Cheremisinoff MP, editor. Handbook of fluids in motion, Ann Arbor, MI: Ann Arbor Publishers, 1983:79-91.
90. Freymuth P. A bibliography of thermal anemometry. St Paul, Minnesota: TSI Incorporated, 1992.
91. Fingerson LM, Freymuth P. Thermal anemometers. In: Goldstein RJ. Fluid mechanics measurements, 2nd ed. Washington, DC: Taylor and Francis, 1977:115-73.
92. Lomas CG. Fundamentals of hot-wire anemometry. London: Cambridge University Press, 1986.
93. Perry AE. Hot-wire anemometry. Oxford, UK, Clarendon Press, 1982.
94. Freymuth P. Frequency response and electronic testing for constant-temperature hot-wire anemometers. J Phys E: Sci Instrum 1977;10:705-10.
95. Bremhorst K, Gilmore DB. Comparison of dynamic and static hot-wire anemometer calibrations for velocity perturbation measurements. J Phys E: Scientific Instrum 1976;9:1097-100.
96. Collis DC, Williams MJ. Two-dimensional convection from heated wires at low Reynolds number. J Fluid Mech 1959;6:357-84.
97. Champange FH. Turbulence measurements with inclined hot-wires. Report No. 103, Boeing Scientific Research Laboratories, Flight Science Laboratory, The Boeing Company, Seattle, Washington, 1965.
98. Comte-Bellot G, Strohl A, Alcarez E. On aerodynamic disturbances caused by single hot-wire probe. J Appl Mech 1971;38:767-74.
99. Jorgensen FE. Directional sensitivity of wire and fiber film probes. DISA Inform 1971;11:31-7.
100. Drubka RE, Tan-Atichat J, Nagib HM. On temperature and yaw dependence of hot-wires. IIT Fluid and Heat Transfer, Report no. R77-1, Illinois Institute of Technology, Chicago, IL, 1977.
101. Lueptov RM, Breuer KS, Haritonidis JH. Computer-aided calibration of X-probes using look-up table. Exp Fluids 1988;6:115-8.
102. Fujita H, Kovasznay LSG. Measurement of Reynolds stress by a single rotated hot-wire anemometer. Rev Sci Instrum 1968;39:1351-5.
103. Fabris G. Probe and method for simultaneous measurement of 'True' instantaneous temperature and three velocity components in turbulent flow. Rev Sci Instrum 1978;49:654-64.
104. Löfdahl L, Stemme G, Johansson B. Silicon based flow sensors for mean velocity and turbulence measurements. Exp Fluids 1992;12:391-3.
105. Jiang FK, Tai YC, Ho CM, Li WJ. A micromachined polysilicon hot-wire anemometer. Technical Digest, Solid-State Sensor and Actuator Workshop. Hilton Head, South Carolina, Catalog No. 64TRF-0001, Transducers Research Foundation, Cleveland Heights, OH, 13-16 June 1994:264-7.
106. Ebefors T, Kälvesten E, Stemme G. Three-dimensional silicon triple-hot-wire anemometer based on polyimide joints. IEEE Int Workshop on Micro Electro Mechanical System (MEM'98), Heidelberg, Germany, 25-29 January, 1998:93-8.
107. Ebefors T, Kälvesten E, Stemme G. New small radius joints based on thermal shrinkage of polyimide in V-grooves for robust self-assembly 3-D microstructures. J Micromech Microengng, 1998, to appear.
108. Stanton TE, Marshall D, Bryant CN. On the conditions at the boundary of a fluid in turbulent motion. Proc Roy Soc London A 1920;97:413-34.
109. Levéque MA. Transmission de Chaleur par Convection. Ann Mines 1928;13:201-405.
110. Munson BH, Young DF, Okiishi TH. Fundamentals of fluid mechanics. New York: Wiley, 1990.
111. Haritonidis JH. The measurements of wall-shear stress. In: Gad-el-Hak M, editor. Advances in fluid mechanics measurements. Berlin: Springer, 1989:229-61.
112. Winter K. An outline of the techniques available for the measurement of skin friction in turbulent boundary layers. Prog Aerospace Sci 1977;18:1-55.
113. Hakkinen RJ. Survey of skin friction measurements techniques. AIAA Minisymposium, Dayton, OH, 1991.
114. Hanratty TJ, Campbell JA. Measurement of wall shear stress. In: Goldstein RJ, editor. Fluid mechanics measurements, 2nd ed. Washington, DC: Taylor and Francis, 1996:575-648.
115. Oudheusden B, Huijsing J. Integrated flow friction sensor. Sensors Actuators A 1988;15:135-44.
116. Schmidt M, Howe R, Senturia S, Haritonidis J. Design and calibration of a microfabricated floating-element shear-stress sensor. IEEE Trans Electron Dev 1988;35:750-7.
117. Ng K, Shajii K, Schmidt M. A liquid shear-stress sensor fabricated using wafer bonding technology. Proc 6th Int Conf on Solid-State Sensors and Actuators (Transducers'91), San Francisco, CA, 24- 27 June, 1991:931-4.
118. Liu C, Tai Y, Huang J, Ho CM. Surface micromachined thermal shear stress sensor. Symp on Application of Micro-Fabrication to Fluid Mechanics. ASME Winter Annual Meeting, Chicago, IL, 13-18 November, 1994:9-12.
119. Pan T, Hyman D, Mehregany M, Reshotko E, Willis B. Calibration of Microfabricated Shear Stress Sensors. Proc 8th Int Conf on Solid-State Sensors and Actuators (Transducers'95), Stockholm, Sweden, 25-29 June, 1995:443-6.
120. Padmanabhan A, Goldberg H, Breuer K, Schmidt M. A silicon micromachined floating-element shear-stress sensor with optical position sensing by photodiodes. Proc 8th Int Conf on Solid-State Sensors and Actuators (Transducers'95), Stockholm, Sweden, 25-29 June, 1995;436-9.
121. Kälvesten E. Pressure and wall shear stress sensors for turbulence measurements. Ph.D. Thesis, Royal Institute of Technology, TRITA-ILA-9601, Stockholm, Sweden, 1996.
122. Ludwieg H. Instrument for measuring the wall shearing stress of turbulent boundary layers. NACA Technical Memorandum No. 1284, Washington, DC, 1950.
123. Liepman HW, Skinner, GT. Shearing-stress measurements by use of a heated element. NACA Technical Note No. 3268, Washington, DC, 1954.
124. Bellhouse BJ, Schultz L. Determination of mean and dynamic skin friction separation in low-speed flow with a thin-film heated element. J Fluid Mech 1966;24:379-400.
125. Menendez AN, Ramaprian, BR. The use of flush-mounted hot-film gauges to measure skin friction in unsteady boundary layers. J Fluid Mech 1985;161:139-59.
126. Ramaprian BR, Tu SW. Calibration of a heat flux gauge for skin friction measurement. J Fluids Engng 1983;105:455-7.
127. Patel VC. Calibration of the Preston tube and limitations on its use in pressure gradients. J Fluid Mech 1965;23:185-208.
128. Breuer K.S. Stochastic calibration of sensors in turbulent flow fields. Exp Fluids 1995;19:138-41.
129. Bellhouse BJ, Rasmussen CG. Low-frequency characteristics of hot-film anemometers. DISA Inform 1986;6:3-10.
130. Brown GL. Theory and application of heated films for skin friction measurements. Proc Heat Transfer and Fluid Mechanics Institute 1967;361-81.
131. Tardu S, Pham CT, Binder G. Effects of longitudinal diffusion in the fluid and heat conduction to the substrate on response of wall hot-film gauges. In: Johansson AV, Alfredsson PH, editors. Advances in turbulence 3. Berlin: Springer, 1991:506-13.
132. Ling SC. Heat transfer from a small isothermal spanwise strip on an insulated boundary. J Heat Transfer 1963;C85:230-6.
133. Pedley TJ. On the forced heat transfer from a hot-film embedded in the wall in two-dimensional unsteady flow. J Fluid Mech 1972;55:329-57.
134. Brodkey RS. The phenomena of fluid motions. New York: Addison-Wesley, 1967.
135. Blackwelder RF. Hot-wire and hot-film anemometers. In: Emrich RJ, editor. Methods of experimental physics - fluid dynamics. New York: Academic Press, 1981;18A:259-314.
136. Kälvesten E, Vieider C, Löfdahl L, Stemme G. An integrated pressure-velocity sensor for correlation measurements in turbulent gas flows. Sensors Actuators A 1996;52:51-8.
137. Jiang FK, Tai YC, Gupta B, Goodman R, Tung S, Huang J, Ho CM. A surface micromachined shear-stress imager. Proc IEEE 9th Int Workshop on Micro Electro Mechanical Systems. Amsterdam, The Netherlands, IEEE Publication No. 1084-6999, New York, 11-15 February 1996:110-5.
138. Goldberg HD, Breuer KS, Schmidt MA. A silicon wafer-bonding technology for microfabricated shear-stress sensors with backside contacts. Technical Digest, Solid-State Sensor and Actuator Workshop, 1994:111-5.
139. Padmanabhan A. Silicon micromachined sensors and sensor arrays for shear-stress measurements in aerodynamic flows. Ph.D. Thesis, Department of Aeronautics and Astronautics, Massachusetts Institute of Technology, Cambridge, Massachusetts, 1997.
140. Sherman FS. Viscous flow. New York: McGraw-Hill, 1990.
141. White FM. Viscous fluid flow, 2nd ed. New York: McGraw-Hill, 1991.
142. Eckelmann H. A review of knowledge on pressure fluctuations. In: Kline SJ, Afgan NH, editors. Near-Wall Turbulence. New York: Hemisphere, 1990:328-47.
143. Harrison M. Pressure fluctuations on the wall adjacent to turbulent boundary layers. David Taylor Naval Ship Research and Development Center, DTNSRDC Technical Report No. 1260, Bethesda, MD, 1958.
144. Willmarth WW, Wooldridge CE. Measurements of the fluctuating pressure at the wall beneath a thick turbulent boundary layer. J Fluid Mech 1962;14:187-210.
145. Bull MK. Wall-pressure fluctuations associated with subsonic turbulent boundary layer flow. J Fluid Mech 1967;28:719-54.
146. Bull MK, Thomas ASW. High frequency wall-pressure fluctuations in turbulent boundary layers. Phys Fluids 1976;19:597-9.
147. Schewe G. On the structure and resolution of wall-pressure fluctuations associated with turbulent boundary-layer flow. J Fluid Mech 1983;134:311-28.
148. Lauchle GC, Daniels MA. Wall-pressure fluctuations in turbulent pipe flow. Phys Fluids 1984;30:3019-24.
149. Farabee TM, Casarella M. Spectral features of wall pressure fluctuations beneath turbulent boundary layers. Phys Fluids 1991;3:2410-9.
150. Farabee TM. An experimental investigations of wall pressure fluctuations beneath non-equilibrium turbulent flows. DTNSRDC Technical Report No. 86/047, David Taylor Naval Ship Research and Development Center, Bethesda, Maryland, 1986.
151. Gedney CJ, Leehey P. Wall pressure fluctuations during transition on a flat plate. Proc Symp on Flow Induced Noise due to Laminar-Turbulent Transition Process, ASME NCA vol 5, New York: ASME, 1989.
152. Royer M, Holmen P, Wurm M, Aadland P, Glenn M. ZnO on Si integrated acoustic sensor. Sensors Actuators A 1983;4:357-62.
153. Kim ES, Kim JR, Muller RS. Improved IC-compatible piezoelectric microphone and CMOS process. Proc 6th Int Conf on Solid-State Sensors and Actuators (Transducers'91), San Fransisco, CA, 24-28 June 1991:270-3.
154. Kühnel W. Silicon condenser microphone with integrated field-effect transistor. Sensors Actuators A 1991;25-27:521-5.
155. Schellin R, Hess G. A silicon microphone based on piezoresistive polysilicon strain gauges. Sensors Actuators A 1992;32:555-9.
156. Schellin R, Pedersen M, Olthuis W, Bergveld P, Hess G. A monolithically integrated silicon microphone with piezoelectric polymer layers. MME'95, Micromechanics Europe, Copenhagen, Denmark, 3-5 September, 1995;217-20.
157. Sessler G. Acoustic sensors. Sensors Actuators A 1991;25-27:323-30.
158. Guckel H. Fine grained films and its application to planar pressure transducers. Proc 4th Int Conf on Solid-State Sensors and Actuators (Transducers'87), Tokyo, Japan, 2-5 June, 1987:277-82.
159. Sugiyama S, Shimaoka K, Tabata O. Surface micromachined microdiaphragm pressure sensor. Sensors Mater 1993;4:265-75.
160. Liu J, Tai YC, Pong K, Ho CM. MEMS for pressure distribution studies of gaseous flows in microchannels. Proc IEEE 8th Int Workshop on Micro Electro Mechanical Systems (MEMS'95), Amsterdam, The Netherlands, IEEE Publication No. 95CH35754, New York, 29 January-2 February, 1995:209-215.
161. Kovács A, Stoffel A. Integrated condenser microphone with polysilicon electrodes. MME'95, Micromechanics Europe, Copenhagen, Denmark, 3-5 September, 1995:132-5.
162. Scheeper P, van der Donk A, Olthuis W, Bergveld P. A review of silicon microphones. Sensors Actuators A 1994;44:1-11.
163. Hohm D. Subminiatur-Silizium-Kondensatormikrofon, Fortschritte der Akustik. DAGA'85. 1985:847-50.
164. Sprenkels AJ. A silicon subminiature electret capacitive microphone. Ph.D. Thesis, University of Utrecht, Utrecht, The Netherlands, 1988.
165. Murphy P, Hubschi K, De Rooij N, Racine C. Subminiature silicon integrated electret capacitive microphone. IEEE Trans Electron Insul 1989;EI-24:495-8.
166. Bergqvist J, Rudolf F. A new condenser microphone in silicon. Sensors and Actuators A 1990;21:123-5.
167. Muller RS. Strategies for sensor research. Proc 4th Int Conf on Solid-State Sensors and Actuators (Transducers'87), Tokyo, Japan, 2-5 June, 1987:107-11.
168. Franz J. Aufbau, Funktionsweise und technische Realisierung eines piezoelectrischen Siliziumsensors für akustische Grössen. VDI-Berichre No. 677, Germany, 1988:299-302.
169. Sprenkels AJ, Groothengel RA, Verloop AJ, Bergveld P. Development of an electret microphone in silicon. Sensors Actuators A 1989;17:509-12.
170. Hohm D, Hess G. A subminiature condenser microphone with silicon-nitride membrane and silicon backplate. J Acoust Soc Amer 1989;85:476-80.
171. Voorthuysen JA, Bergveld P, Sprenkels AJ. Semiconductor-based electret sensors for sound and pressure. IEEE Trans Electron Insul 1989;EI-24:267-76.
172. Kühnel W, Hess G. Micromachined subminiature condenser microphones in silicon. Sensors Actuators A 1992;32:560-4.
173. Scheeper P, van der Donk A, Olthuis W, Bergveld P. Fabrication of silicon condenser microphones using silicon wafer technology. J Microelectromech Systems 1992;1:147-54.
174. + silicon membrane. Sensors Actuators A 1992;31:149-52.
175. Ried R, Kim E, Hong D, Muller R. Piezoelectric microphone with on-chip CMOS circuits. J Microelectromech Systems 1993;2:111-20.
176. Kälvesten E. Piezoresistive silicon microphones for turbulence measurements. Thesis for Technical Licentiate Degree, Royal Institute of Technology, TRITA-IL-9402, Stockholm, Sweden, 1994.
177. Bergqvist J. Modelling and micromachining of capacitive microphones. Ph.D. Thesis, Uppsala University, Uppsala, Sweden, 1994.
178. Kronast W, Muller B, Stoffel A. Miniaturized single-chip silicon membrane microphone with integrated field-effect transistor. MME'95, Micromechanics Europe, Copenhagen, Denmark, 3-5 September, 1995:136-9.
179. Guckel H. Surface micromachined pressure transducers. Sensors Actuators A 1991:28:133-46.
180. Rossi M. Acoustics and electroacoustics. Boston: Artech House, 1988:245-308.
181. Kälvesten E, Löfdahl L, Stemme G. Small piezoresistive silicon microphones specially designed for the character-ization of turbulent gas flows. Sensors Actuators A 1995;46-47:151-5.
182. Kälvesten E, Löfdahl L, Stemme G. An analytical characterization of a piezoresistive square diaphragm silicon microphone. Sensors Mater 1996;8:113-36.
183. Miller MF, Allen MG, Arkilic EB, Breuer KS, Schmidt MA. Fabry-Perot pressure sensor arrays for imaging surface pressure distributions. Proc Int Conf on Solid-State Sensors and Actuators (Transducers'97). Chicago, IL, 16-19 June, 1997:1469-72.
184. Busch-Vishniac IJ. Trends in electromechanical transduction. Phys Today 1998;51:28-34.
185. Bandyopadhyay PR. Microfabricated silicon surfaces for turbulence diagnostics and control. In: Sommerfeldt S, Hamada H, editors. Proc Int Symp on Active Control of Sound and Vibration (Active 95), Newport Beach, CA, 6-8 July, 1995:1327-38.
186. Timoshenko S. Analysis of bi-metal thermostats. J Opt Soc Amer 1925;11:233-55.
187. Riethmüller W, Benecke W. Thermally exited silicon microactuators. IEEE Trans Electron Dev 1988;35:758-63.
188. Ataka M, Omodaka A, Fujita H. A biomimetic micro system - a ciliary motion system. Proc 7th Int Conf on Solid-State Sensors and Actuators (Transducers'93). Yokohama, Japan, 1993:38-41.
189. Elwenspoek M, Smith L, Hök B. Active joints for microrobot limbs. J Micromech Microengng 1992;2:221-3.
190. Lin G, Kim CJ, Konishi S, Fujita H. Design, fabrication and testing of a C-shaped actuator. Technical Digest, 8th Int Conf on Solid-State Sensors and Actuators (Transducers'95 and Eurosensors 9), 25-29 June, Stockholm, Sweden, 1995:416-9.
191. Yasuda T, Shimonoyama I, Mirura H. CMOS drivable electrostatic microactuator with large deflection. Proc IEEE 10th Int Workshop on Micro Electro Mechanical Systems (MEMS'97), Nagoya, Japan, 26-30 January. 1997:90-5.
192. Smela E, Inganäs O, Lundström I. Controlled folding of micrometer-size structures. Science 1995;268:221-3.
193. Otsuka K. Fundamentals of shape memory alloys - in view of intelligent materials. Proc Int Symp on Microsystems, Intelligent Materials and Robots, Sendai, Japan. 27-29 September, 1995;225-30.
194. Huang JB, Tung S, Ho CM, Liu C, Tai YC. Improved micro thermal shear-stress sensor. IEEE Trans Instrum Measurement 1996;45(2).
195. Miller RA, Burr GW, Tai YC, Psaltis D, Ho CM, Katti RR. Electromagnetic MEMS scanning mirrors for holographic data storage. Technical digest, solid-state sensors and actuators workshop, Hilton Head, South Carolina, 3-6 June, 1996:183-6.
196. Liu C, Tsao T and Tai YC. Out-of-plane permalloy magnetic actuators for delta-wing control. Proc IEEE 8th Int Workshop on Micro Electro Mechanical Systems (MEMS'95), Amsterdam, The Netherlands, IEEE Publication No. 95CH35754, New York, 29 January-2 February, 1995:7-12.
197. Liu C, Tsao T, Tai YC, Liu W, Will P, Ho CM. A micromachined permalloy magnetic actuator array for micro robotic assembly system. Technical Digest, 8th Int Conf on Solid-State Sensors and Actuators (Transducers'95 and Eurosensors 9), Stockholm, Sweden, 25-29 June, 1995:328-31.
198. Tsao T, Liu C, Tai YC, Ho CM. Micromachined magnetic actuator for active fluid control. In: Bandyopadhyay PR, Breuer KS, Blechinger CJ, editors. Application of microfabrication to fluid mechanics 1994, ASME FED vol. 197. New York: ASME, 1994:28-46.
199. Yang X, Grosjean C, Tai YC, Ho CM. A MEMS thermopneumatic silicone membrane valve. Proc IEEE 10th Int Workshop on Micro Electro Mechanical Systems (MEMS'97), Nagoya, Japan, 26-30 January 1977.
200. Fukuta Y, Akiyama T, Fujita H. A reshaping technology with Joule heat for three-dimensional silicon structures. Technical Digest, International Conference on Solid-State Sensor and Actuator (Tranducers'95), Stockholm, Sweden, 25-29 June, 1995:174-7.
201. Garcia EJ. Micro-flex mirror and instability actuation technique. Proc IEEE 11th Int Workshop on Micro Electro Mechanical Systems (MEMS'98), Heidelberg, Germany, 25-29 January, 1998:470-5.
202. Suzuki K, Shimoyama I, Miuara H, Ezura Y. Creation of an insect-based microrobot with an external skeleton and elastic joints. Proc IEEE 5th Int Workshop on Micro Electro Mechanical Systems (MEMS'92). Travemünde, Germany, 4-7 February, 1992:190-5.
203. Hoffman E, Warneke B, Kruglick E, Weigold J, Pister KSJ. 3D Structures with Pizoresistive Sensors in Standard CMOS, Proc IEEE 8th Int Workshop on Micro Electro Mechanical Systems (MEMS'95). Amsterdam, The Netherlands, 29 January-2 February 1995:288-93.
204. Kruglick EJJ, Warneke BA, Pister KSJ. CMOS 3-Axis Accelerometers with Integrated Amplifier. Proc IEEE 11th Int Workshop on Micro Electro Mechanical Systems (MEMS'98), Heidelberg, Germany, 25-29 January, 1998:631-6.
205. Pister KSJ, Fearing RS, Howe RT. A planar air levitated electrostatic actuator system. IEEE Paper No. CH2832-4/90/0000-0067, New York: IEEE, 1990.
206. Lin LY, Lee SS, Pister KSJ, Wu MC. Three-dimensional micro-fresnel optical elements fabricated by micromachining techniques. Electron Lett 1994;30:448-9.
207. Wu MC, Lin LY, Lee SS, Pister KSJ. Micromachined free-space integrated micro-optics. Sensors Actuators A 1995;50:127-34.
208. Gunawan DS, Lin LY, Lee SS, Pister KSJ. Micromachined free-space integrated micro-optics. Sensors Actuators A 1995;50:127-34.
209. Solgaard O, Daneman M, Tien NC, Friedberger A, Müller RS, Lau KY. Optoelectronic packing using silicon surface-micromachined alignment mirrors. IEEE Photon Tech Lett 1995;7:41-3.
210. Fan L, Wu MC, Choquette KD, Crawford MH. Self-assembled microactuated XYZ stages for optical scanning and alignment. Technical Digest, 9th Int Conf on Solid-State Sensor and Actuator (Tranducers'97), Chicago, IL, 16-19 June 1997:319-22.
211. Akiyama T, Collard D, Fujita H. Scratch drive actuator with mechanical links for self-assembly of three-dimensional MEMS. J Microelectromechanical Systems 1997;6:10-7.
212. Fukuta Y, Collard D, Akiyama T, Yang EH, Fujita H. Microactuated self-assembling of 3-D polysilicon structures with reshaping technology. Proc
213. Green PW, Syms RRA, Yeatman EM. Demonstration of three-dimensional microstructure self-assembly. J Microelectromech Systems 1996:4:170-6.
214. Syms RRA. Demonstration of three-dimensional microstructure self-assembly. Sensors Actuators A 1998;65:238-43.
215. Ebefors T, Kälvesten E, Stemme G. Dynamic actuation of polyimide V-grooves joints by electrical heating. Eurosensors XI, Warsaw, 21-24 September, Poland, 1997.
216. Ebefors T, Kälvesten E, Vieider C, Stemme G. New robust small radius joints based on thermal shrinkage of polyimide in V-grooves. Transducers'97, Chicago, IL, 16-19 June 1997.
217. Bart SF, Tavrow LS, Mehregany M, Lang JH. Microfabricated electrohydrodynamic pumps. Sensors and Actuators A 1990;21-23:193-7.
218. Richter A, Piettner A, Hofmann KA, Sandmaier H. A micromachined electrohydrodynamic (EHD) pump. Sensors Actuators A 1991;29:159-68.
219. Fuhr G, Hagedorn R, Müller T, Benecke W, Wagner B. Microfabricated electrohydrodynamic (EHD) pumps for liquids of higher conductivity. J Microelectromech Systems 1992;1:141-5.
220. Moroney RM, White RM, Howe RT. Ultrasonically induced microtransport. Proc IEEE Micro Electro Mechanical Systems '91, Nara, Japan. New York, IEEE, 1991:277-82.
221. Van Lintel HTG, Van de Pol FCM, Bouwstra S. A piezoelectric micropump based on micromachining of silicon. Sensors Actuators 1988;15:153-67.
222. Esashi M, Shoji S, Nakano A. Normally closed microvalve fabricated on a silicon wafer. Sensors Actuators 1989;20:163-9.
223. Smits JG. Piezoelectric micropump with three valves working peristaltically. Sensors Actuators A 1990;21-23:203-6.
224. Döring C, Grauer T, Marek J, Mettner MS, Trah H-P, Willmann M. Micromachined thermoelectrically driven cantilever structures for fluid jet deflection. Proc IEEE Micro Electro Mechanical Systems '92, Travemünde, Germany, 4-7 February, 1992:12-18.
225. Gabriel KJ, Tabata O, Shimaoka K, Sugiyama S, Fujita H. Surface-normal electrostatic/pneumatic actuator. Proc IEEE Micro Electro Mechanical Systems '92, Travemünde, Germany, 4-7 February, 1992:128-31.
226. Taylor GI. Low-Reynolds-number flows. Illustrated experiments in fluid mechanics, National Committee for Fluid Mechanics Films. Cambridge, MA: MIT Press, 1972:47-54.
227. Odell GM, Kovasznay LSG. A new type of water channel with density stratification. J Fluid Mech 1971;50:535-43.
228. Sharatchandra MC, Sen M, Gad-el-Hak M. Thermal aspects of a novel micropumping device. J Heat Transfer 1998;120:99-107.
229. DeCourtye D, Sen M, Gad-el-Hak M. Analysis of viscous micropumps and microturbines. Int J Comput Fluid Dyn 1998;10:13-25.
230. Sharatchandra MC, Sen M, Gad-el-Hak M. A new approach to constrained shape optimization using genetic algorithms. AIAA J 1998;36:51-61.
231. Wannier GH. A contribution to the hydrodynamics of lubrication. Quart Appl Math 1950;8:1-32.
232. Kamal MM. Separation in the flow between eccentric rotating cylinders. Trans ASME Ser D 1966;88:717-24.
233. Ashino I, Yoshida K. Slow motion between eccentric rotating cylinders. Bull JSME 1975;18(117):280-5.
234. Maureau J, Sharatchandra MC, Sen M, Gad-el-Hak M. Flow and load characteristics of microbearings with slip. J Micromech Microengng 1997;7:55-64.
235. Jeffery GB. Plane stress and plane strain in bipolar co-ordinates. Philos Trans Roy Soc Ser A 1920;221:265-89.
236. Piekos ES, Orr DJ, Jacobson SA, Ehrich FF, Breuer KS. Design and analysis of microfabricated high speed gas journal bearings. AIAA Paper No. 97-1966, AIAA, Reston, Virginia, 1997.
237. Epstein AH, Senturia SD. Macro power from micro machinery. Science. 1997;276:1211.
238. Epstein AH, Senturia SD, Al-Midani O, Anathasuresh G, Ayon A, Breuer K, Chen KS, Ehrich FF, Esteve E, Frechette L, Gauba G, Ghodssi R, Groshenry C, Jacobson SA, Kerrebrock JL, Lang JH, Lin CC, London A, Lopata J, Mehra A, Mur Miranda JO, Nagle S, Orr DJ, Piekos E, Schmidt MA, Shirley G, Spearing SM, Tan CS, Tzeng YS, Waitz IA. Micro-heat engines, gas turbines, and rocket engines - the MIT microengine project. AIAA paper No. 97-1773, AIAA, Reston, VA, 1997.
239. Kramers H. Heat transfer from spheres to flowing media. Physica 1946;12:61-80.
240. Liang WJ, Liou JA. Flow around a rotating cylinder near a plane boundary. J Chinese Inst Engrs 1995;18:35-50.