Smart MEMS and sensor systems

Smart MEMS and Sensor Systems

Volumn , Issue , 2006, Pages 1-539

  Gaura, Elena ^a   Newman, Robert ^a  

^a Institute for Clean Growth and Future Mobility   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

AD HOC NETWORKS; DECISION MAKING; SEMICONDUCTOR DEVICE MANUFACTURE;

DIFFERENT DOMAINS; DISRUPTIVE TECHNOLOGY; MEMS TECHNOLOGY; PERVASIVE SENSING; SEMICONDUCTOR INDUSTRY; SENSOR SYSTEMS; TECHNOLOGY MANAGERS; TOP DOWN DESIGN;

UBIQUITOUS COMPUTING;

EID: 84967488902     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1142/P355     Document Type: Book

References (481)

1. Senturia, S. D. (2003) Perspectives on MEMS, past and future: the tortuous pathway from bright ideas to real products, Proc. of the 12th Int. Conf. on Solid State Sensors, Actuators and Microsystems Transducers'03, Boston, MA, pp. 10-15.
2. Device Basics, (June 2003) Semiconductor International, pp. 128, www. semiconductor. net.
3. Grieco, B. L. (August 2004) S MEMS advance medical electronics, EE Times.
4. Legg, G. (2003) Cover story, Design News, pp. 73, www. designnews. com.
5. Crossbow integrates GPS with MEMS, Small Times, http: //www. smalltimes. eom/document_brief. cfm#brief_4.
6. MEMSIC sensors in Mitsubishi mobile phone, Small Times, http: //www. smalltimes. eom/document_brief. cfm#brief_4.
7. New Products (2004) ADI MEMS accelerometers prevent information loss, EE Times, http: //www. eetasia. com.
8. New Products (2003) Fujitsu optical switch based on MEMS mirrors, EE Times, http: //www. eetasia. com.
9. Industry news (December 2001) Standard Challenge For Sensor Vendors, p. 5.
10. Harris, C. A. (August 2002) Structural health monitors go wireless, Civil Engineering, Vol. 72, Issue 8, p. 19, l/3p, http: //search. epnet. com/direct. asp?an=7278400&db=buh.
11. Device Basics (June 2003) Semiconductor International, p. 128, www. semiconductor. net.
12. Kahaner, D. K. (November 1994) Micromachine Center Progress, Micromachine Symposium, Tokyo, http: //www. atip. org/public/atip. reports. 94/micromac. 94. html.
13. Voelker, M. A. (1992) Synchrotron etches microstructures for tiny 3d components, SPIE, OE Reports, p. 104.
14. Stenmark, L. (2001) Microsystems in Space exploration, Proc. of Transduc-ers'01, paper no. 3A1. 01.
15. Kohler, J. et al. (2001) A hybrid cold gas microthruster system for spececraft, Proc. of Transducers'01, paper no. 3A1. 02.
16. Pister, K. S. J., Kahn, J. M. and Boser, B. E. (1999) Smart dust: wireless networks of millimeter-scale sensor nodes, Highlight Article In 1999 Electronics Research Laboratory Research Summary.
17. Manobianco J., Evans, R. J., Pister, K. S. J. and Manobianco, D. M., GEMS: A revolutionary system for environmental monitoring, Proc Nanotech O4, pp. 422-425.
18. Abbott, D. et al, Development and evaluation of sensor concepts for ageless aerospace vehicles, Threats and Measurands, NASA, http: //techreports. larc. nasa. gov/ltrs/PDF/2002/cr/NASA-2002-cr211772. pdf.
19. http: //www. nasatech. com/Briefs/JuneOO/NP020699. html.
20. Bryzek (October 2003) MEMS-IC integration remains a challenge, PlanetAnalog. http: //www. planetanalog. com/showArticle. jhtml?articleID= 15800098.
21. Ohr, S. (October 2003) MEMS, EE Times, http: //www. eetimes. com/article/showArticle. jhtml?articleId=18309906.
22. Hornbeck, L. J., Digital Light Processing: A New MEMS-Based Display Technology, Texas Instruments White Paper, http: //www. dlp. com/dlp_ technology/dlp_technology_white_papers. asp.
23. Grundy, P. J. (1998) Thin film magnetic recording media, Journal of Physics D-Applied Physics 31, 2975-2990.
24. Binning, G., Rohrer, M., Gerber, C. and Weibel, E. (1982) Surface studies by scanning tunneling microscopy, Phys. Rev. Lett. 49, 57-61.
25. Volland, B. E., Heerlein, H. and Rangelow, I. W. (2002) Electrostatically driven microgripper, Microelectronic Engineering 61(2), 1015-1023.
26. Epstein, A. and Senturia, S. (1997) Macro power from micro machinery, Science 276, 1211-1211.
27. International Technology Roadmap for Semiconductors (2003).
28. Ashby, M. (1992) Materials Selection in Mechanical Design (Pergamon, Oxford).
29. Van Kessel, P. F., Hornbeck, L. J., Meier, R. E. and Douglass, M. R. (1998) MEMS-based projection display, Proceedings of the IEEE 86, 1687-1704.
30. Ishimori, M., Song, J., Sasaki, M. and Hane, K. (2003) Si-wafer bending technique for a three-dimensional microoptical bench, Japanese Journal of Applied Physics Part 1-Regular Papers Short Notes & Review Papers 42, 4063-4066.
31. Kolesar, E. S. et al. (2001) Three-dimensional structures assembled from polysilicon surface micromachined components containing continuous hinges and microrivets, Thin Solid Films 398, 566-571.
32. Syms, R. R. A., Yeatman, E. M., Bright, V. M. and Whitesides, G. M. (2003) Surface tension-powered self-assembly of micro structures-The state-of-the-art, Journal of Microelectromechanical Systems 12, 387-417.
33. Sniegowski, J. J. and de Boer, M. P. (2000) IC-compatible polysilicon surface micromachining, Annual Review of Materials Science 30, 299-333.
34. Lin, L. Y., Lee, S. S., Pister, K. S. J. and Wu, M. C. (1994) 3-dimensional micro-fresnel optical-elements fabricated by micromachining technique, Electronics Letters 30, 448-449.
35. Lu, T. J., Moore, D. F. and Chia, M. H. (2002) Mechanics of micromechanical clips for optical fibers, Journal of Micromechanics and Microengineering 12, 168-176.
36. Mankame, N. D. and Ananthasuresh, G. K. (2004) A novel compliant mechanism for converting reciprocating translation into enclosing curved paths, Journal of Mechanical Design 126, 667-672.
37. Chua, H. C. (2005) In Engineering, Cambridge University, Cambridge.
38. Denhoff, M. (2003) A measurement of Young's modulus and residual stress in MEMS bridges using a surface profilometer, J. Micromech. Microeng. 13, 686-692.
39. Chen, S., Baughn, T., Yao, Z. and Goldsmith, C. (2002) A new in situ residual stress measurement method for a MEMS thin fixed-fixed beam structure, J. Microelectromech. Syst. 11, 309-316.
40. Mehra, A. et al. (2000) A six-wafer combustion system for a silicon micro gas turbine engine, Journal of Microelectromechanical Systems 9, 517-527.
41. Livermore, C. et al. (2004) A high-power MEMS electric induction motor, Journal of Microelectromechanical Systems 13, 465-471.
42. Hara, M., Tanaka, S. and Esashi, M. (2003) Rotational infrared polarization modulator using a MEMS-based air AMP turbine with different types of journal bearing, Journal of Micromechanics and Microengineering 13, 223-228.
43. Deng, K. R. and Mehregany, M. (1998) Outer-rotor polysilicon wobble micromotors, Sensors and Actuators A-Physical 64, 265-271.
44. Williams, J. A. (2001) Friction and wear of rotating pivots in MEMS and other small scale devices, Wear 250, 965-972.
45. Bourlon, B., Glattli, D. C., Miko, C., Forro, L. and Bachtold, A. (2004) Carbon nanotube based bearing for rotational motions, Nano Letters 4, 709-712.
46. Bang, Y. I. et al. (2004) Thin film micro carbon dioxide sensor using MEMS process, Sensors and Actuators B-Chemical 102, 20-26.
47. Rasmussen, A., Mavriplis, C., Zaghloul, M. E., Mikulchenko, O. and Mayaram, K. (2001) Simulation and optimization of a microfluidic flow sensor, Sensors and Actuators A-Physical 88, 121-132.
48. Richards Grayson, A. C. et al. (2004) A BioMEMS review: MEMS technology for physiologically integrated devices, Proceedings of the IEEE 92, 6-21.
49. Noda, T. et al. (2004) Characteristics of high-resolution hemoglobin measurement microchip integrated with signal processing circuit, Japanese Journal of Applied Physics Part 1-Regular Papers Short Notes & Review Papers 43, 2392-2396.
50. Wang, W. J., Guo, D. G., Lin, R. M. and Wang, X. W. (2004) A singlechip diaphragm-type miniature Fabry-Perot pressure sensor with improved cross-sensitivity to temperature, Measurement Science & Technology 15, 905-910.
51. McKendry, R. et al. (2002) Multiple label-free biodetection and quantitative DNA-binding assays on a nanomechanical cantilever array, Proceecings of the National Academy of Sciences of the United States of America 99, 9783-9788.
52. Seshia, A. A. et al. (2002) A vacuum packaged surface micromachined resonant accelerometer, Journal of Microelectromechanical Systems 11, 784-793.
53. Ayazi, F. and Najafi, K. (2001) A HARPSS polysilicon vibrating ring gyroscope, Journal of Microelectromechanical Systems 10, 169-179.
54. Gizeli, E. (2000) Study of the sensitivity of the acoustic waveguide sensor, Analytical Chemistry 72, 5967-5972.
55. Zerov, V. Y. and Malyarov, V. G. (2001) Heat-sensitive materials for uncooled microbolometer arrays, Journal of Optical Technology 68, 939-948.
56. Lee, D. W., Ono, T. and Esashi, M. (2002) Fabrication of thermal microprobes with a sub-100 nm metal-to-metal junction, Nanotechnology 13, 29-32.
57. Suzuki, Y. (1996) Novel microcantilever for scanning thermal imaging microscopy, Japanese Journal of Applied Physics Part 2-Letters 35, L352-L354.
58. Li, M. H. and Gianchandani, Y. B. (2000) Microcalorimetry applications of a surface micromachined bolometer-type thermal probe, Journal of Vacuum Science & Technology B 18, 3600-3603.
59. Li, M. H. and Gianchandani, Y. B. (2003) Applications of a low contact force polyimide shank bolometer probe for chemical and biological diagnostics, Sensors and Actuators A-Physical 104, 236-245.
60. Huber, J. E., Fleck, N. A. and Ashby, M. F. (1997) The selection of mechanical actuators based on performance indices, Proceedings of the Royal Society of London Series A-Mathematical Physical and Engineering Sciences 453, 2185-2205.
61. Dai, C.-L. (2003) In situ electrostatic microactuators for measuring the Young's modulus of CMOS thin films, J. Micromech. Microeng. 13, 563-567.
62. Caspar, J., Chu, V. and Conde, J. (2003) Electrostatic actuation of thin-film microelectromechanical structures, J. Appl. Phys. 93, 10018-10029.
63. Srikar, V. T. and Spearing, S. M. (2003) Materials selection for microfabricated electrostatic actuators, Sensors and Actuators A-Physical 102, 279-285.
64. Knapp, J. and de Boer, M. (2002) Mechanics of microcantilever beams subject to combined electrostatic and adhesive forces, J. Microelectromech. Syst. 10, 754-764.
65. Grade, J. and Jerman, H. A. K. (2003) Design of large deflection electrostatic actuators, J. Microelectromech. Syst. 12, 335-343.
66. Roch, I., Bidaud, P., Collard, D. and Buchaillot, L. (2003) Fabrication and characterization of an SU-8 gripper actuated by a shape memory alloy thin film, Journal of Micromechanics and Microengineering 13, 330-336.
67. Luo, J. K., Flewitt, A. J., Spearing, S. M., Fleck, N. A. and Milne, W. I. (2004) Normally closed microgrippers using a highly stressed diamond-like carbon and Ni bimorph structure, Appl. Phys. Lett. 85, 5748-5750.
68. Binnig, G. and Rohrer, H. (1982) Scanning tunneling microscopy, Helvetica Physica Acta 55, 726-735.
69. Verway, J., Amerasekera, E. A. and Bisschop, J. (1990) The physics of Si02 layers, Rep. Prog. Phys. 53, 1297-1331.
70. Deal, B. E. and Grove, A. S. (1965) General relationship for the thermal oxidation of silicon, Journal of Applied Physics 36, 3770-3778.
71. Duffy, M. et al. (1983) LPCVD polycrystalline silicon: growth and physical properties of diffusion-doped, ion-implanted, and undoped films, RCA Review 44, 313-325.
72. Harbeke, G., Krausbauer, L., Steigmeier, E., Widmer, A., Kappert, H. F. and Neugebauer, G. (1983) LPCVD polycrystalline silicon: growth and physical properties of in situ phosphorus doped and undoped films, RCA Review 44, 287-312.
73. Harbeke, G., Krausbauer, L., Steigmeier, E., Widmer, A., Kappert, H. F. and Neugebauer, G. (1984) Growth and physical properties of LPCVD polycrystalline silicon films, J. Electrochem. Soc. 131, 675-682.
74. Brotherton, S., Ayres, J. and Young, N. (1991) Characterisation of low temperature poly-Si thin film transistors, Solid-State Electronics 34, 671-679.
75. Olson, J. M. (2002) Analysis of LPCVD process conditions for the deposition of low stress silicon nitride. Part I: preliminary LPCVD experiments, Materials Science in Semiconductor Processing 5, 51-60.
76. French, P. J., Sarro, P. M., Mallee, R., Fakkeldij, E. J. M. and Wolffenbuttel, R. F. (1997) Optimization of a low-stress silicon nitride process for surface-micromachining applications, Sensors and Actuators A-Physical 58, 149-157.
77. Heintze, M., Zedlitz, R., Wanka, H. and Schubert, M. (1996) Amorphous and microcrystalline silicon by hot wire chemical vapor deposition, J. Appl. Phys. 79, 2699-2706.
78. Matsumura, H., Umemoto, H. and Masuda, A. (2004) Cat-CVD (hot-wire CVD): how different from PECVD in preparing amorphous silicon, Journal of Non-Crystalline Solids 338-340, 19-26.
79. Matsumura, H. (1998) Formation of silicon-based thin films prepared by catalytic chemical vapor deposition (Cat-CVD) method, Japanese Journal of Applied Physics, Part 1-Regular Papers Short Notes & Review Papers 37, 3175-3187.
80. Chen, F. F. (1984) Introduction to Plasma Physics and Controlled Fusion, (Plenum, New York).
81. Kohler, K., Coburn, J. W., Horne, D. E., Kay, E. and Keller, J. H. (1985) Plasma potentials of 13. 56 MHz RF argon glow discharges in a planar system, J. Appl. Phys. 57, 59-66.
82. Perrin, J. (1995) Plasma Deposition of Amorphous Silicon-Based Materials, (eds.) Bruno, G., Capezzuto, P. and Madan, A. 177-241 (Academic Press, London).
83. Perrin, J. (1991) Plasma and surface reactions during a-Si: H films growth, J. Non-Cryst. Solids 137 and 138, 639-644.
84. Flewitt, A. J., Robertson, J. and Milne, W. I. (1999) Growth mechanism of hydrogenated amorphous silicon studied by in situ scanning tunneling microscopy, Journal of Applied Physics 85, 8032-8039.
85. Hess, D. W. (1984) Plasma-enhanced CVD: oxides, nitrides, transition metals, and transition metal silicides, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 2, 244-252.
86. Sommer, T. and Kushner, M. (1992) Numerical investigation of the kinetics and chemistry of rf glow discharge plasmas sustained in He, N2, O2, He/N2/C>2, He/CF4/O2 and SiH4/NH3 using Monte Carlo-fluid hybrid model, J. Appl. Phys. 74, 1654-1673.
87. 4 mixtures for remote plasma-activated chemical-vapor deposition of silicon dioxide, J. Appl. Phys. 74, 6538-6553.
88. Kushner, M. (1992) Simulation of the gas-phase processes in remote-plasmar-activated chemical-vapor deposition of silicon dielectrics using rare gas-silane-ammonia mixures, J. Appl. Phys. 71, 4173-4189.
89. Kushner, M. (1988) A model for the discharge kinetics and plasma chemistry during plasma enhanced chemical vapor deposition of amorphous silicon, J. Appl. Phys. 63, 2532-2551.
90. Hamers, E., Bezemer, J. and van der Weg, W. (1999) Positive ions as growth precursors in plasma enhanced chemical vapor deposition of hydrogenated amorphous silicon, Appl. Phys. Lett. 75, 609-611.
91. Hamers, E., Fontcuberta I. M. A., Niikura, C., Brenot, R. and Roca I. C. P. (2000) Contribution of ions to the growth of amorphous, polymorphous, and microcrystalline silicon thin films, J. Appl. Phys. 88, 3674-3688.
92. Celii, F. G. and Butler, J. E. (1991) Diamond chemical vapor deposition, Annual Review of Physical Chemistry 42, 643-684.
93. Flewitt, A., Dyson, A., Robertson, J. and Milne, W. (2000) Hydrogenated amorphous silicon and silicon nitride deposited at less than 100° C by ECR-PECVD for thin film transistors, Mat. Res. Soc. Symp. Proc. 609, A28. 2. 1.
94. Flewitt, A., Dyson, A., Robertson, J. and Milne, W. (2000) Low temperature growth of silicon nitride by electron cyclotron resonance plasma enhanced chemical vapour deposition, Thin Solid Films 383, 172-177.
95. Rashid, R., Flewitt, A. J. and Robertson, J. (2003) Physical and electrical properties of low temperature (<100°C) SiO2 films deposited by electron cyclotron resonance plasmas, Journal of Vacuum Science & Technology A 21, 728-739.
96. van de Samden, M., Severens, R., Kessels, W., Meulenbroeks, R. and Schram, D. (1998) Plasma chemistry aspects of a-Si: H deposition using an expanding thermal plasma, J. Appl. Phys. 84, 2426-2435.
97. Shinohara, S. and Tanikawa, T. (2004) Development of very large helicon plasma source, Review of Scientific Instruments 75, 1941-1946.
98. Weiler, M., Lang, K., Li, E. and Robertson, J. (1998) Deposition of tetrahedral hydrogenated amorphous carbon using a novel electron cyclotron wave resonance reactor, Appl. Phys. Lett. 72, 1314-1316.
99. Sigmund, P. (1969) Theory of sputtering. I. Sputtering yield of amorphous and polycrystalline targets, Phys. Rev. 184, 383-416.
100. Gautier, C., Moulard, G., Chatelon, J. and Motyl, G. (2001) Influence of substrate bias voltage on the in situ stress measured by an improved optical cantilever techniques of sputtered chromium films, Thin Solid Films 384, 102-108.
101. x thin films, J. Vac. Sci. Technol. B 20, 855-861.
102. Nicolas, S. et al. (1998) Fabrication of a gray-tone mask and pattern transfer in thick photoresists, Journal of Micromechanics and Microengineering 8, 95-98.
103. Yao, J. et al. (2001) Refractive micro lens array made of dichromate gelatin with gray-tone photolithography, Microelectronic Engineering 57-58, 729-735.
104. Coutrot, A. L. et al. (2002) Copper micromoulding process for NMR microinductors realization, Sensors and Actuators A-Physical 99, 49-54.
105. Vugts, M. J. M., Verschueren, G. L. J., Eurlings, M. F. A., Hermans, L. J. F. and Beijerinck, H. C. W. (1996) Si/XeF2 etching: temperature dependence, Journal of Vacuum Science & Technology A-Vacuum Surfaces and Films 14, 2766-2774.
106. Bahreyni, B. and Shafai, C. (2002) Investigation and simulation of XeF2 isotropic etching of silicon, Journal of Vacuum Science & Technology A-Vacuum Surfaces and Films 20, 1850-1854.
107. Douglas, M. A. (1987) 9 (Texas Instruments Inc., USA).
108. Douglas, M. A. (1988) 13 (Texas Instruments Inc., USA).
109. Rangelow, I. W. (2003) Critical tasks in high aspect ratio silicon dry etching for microelectromechanical systems, Journal of Vacuum Science & Technology A 21, 1550-1562.
110. Ayon, A. A., Braff, R., Lin, C. C., Sawin, H. H. and Schmidt, M. A. (1999) Characterization of a time multiplexed inductively coupled plasma etcher, Journal of the Electrochemical Society 146, 339-349.
111. Khanna, R. (2003) MEMS fabrication perspectives from the MIT Microengine Project, Surface & Coatings Technology 163, 273-280.
112. Docker, P. T., Kinnell, P. K. and Ward, M. C. L. (2004) Development of the one-step DRIE dry process for unconstrained fabrication of released MEMS devices, Journal of Micromechanics and Microengineering 14, 941-944.
113. Milanovic, V. (2004) Multilevel beam SOI-MEMS fabrication and applications, Journal of Microelectromechanical Systems 13, 19-30.
114. Zinck, C., Pinceau, D., Defay, E., Delevoye, E. and Barbier, D. B. (2004) Development and characterization of membranes actuated by a PZT thin film for MEMS applications, Sensors and Actuators A-Physical 115, 483-489.
115. Hah, D., Choi, C. A., Kim, C. K. and Jun, C. H. (2004) A self-aligned vertical comb-drive actuator on an SOI wafer for a 2D scanning micromirror, Journal of Micromechanics and Microengineering 14, 1148-1156.
116. Lee, D., Krishnamoorthy, U., Yu, K. and Solgaard, O. (2004) Singlecrystalline silicon micromirrors actuated by self-aligned vertical electrostatic combdrives with piston-motion and rotation capability, Sensors and Actuators A-Physical 114, 423-428.
117. Williams, K. R., Gupta, K. and Wasilik, M. (2003) Etch rates for micromachining processing-Part II, Journal of Microelectromechanical Systems 11, 761-778.
118. Donohue, L. A., Hopkins, J., Barnett, R., Newton, A. and Barker, A. (2004) Micromachining Technology for Micro-Optics and Nano-Optics, pp. 44-53.
119. Celler, G. K. and Cristoloveanu, S. (2003) Frontiers of silicon-on-insulator, Journal of Applied Physics 93, 4955-4978.
120. Turner, K. T., Thouless, M. D. and Spearing, S. M. (2004) Mechanics of wafer bonding: effect of clamping, Journal of Applied Physics 95, 349-355.
121. Cho, Y. and Cheung, N. W. (2003) Low temperature Si layer transfer by direct bonding and mechanical ion cut, Applied Physics Letters 83, 3827-3829.
122. Turner, K. T. and Spearing, S. M. (2002) Modeling of direct wafer bonding: effect of wafer bow and etch patterns, Journal of Applied Physics 92, 7658-7666.
123. Schmidt, M. A. (1998) Wafer-to-wafer bonding for microstructure formation, Proceedings of the IEEE 86, 1575-1585.
124. Chung, G. S. and Kim, J. M. (2004) Anodic bonding characteristics of MLCA/Si-wafer using a sputtered Pyrex #7740 glass layer for MEMS applications, Sensors and Actuators A-Physical 116, 352-356.
125. Wallis, G. and Pomerantz, D. I. (1969) Field assisted glass-metal sealing, Journal of Applied Physics 40, 3946-3949.
126. Schjolberg-Henriksen, K., Jensen, G. U., Hanneborg, A. and Jakobsen, H. (2004) Anodic bonding for monolithically integrated MEMS, Sensors and Actuators A-Physical 114, 332-339.
127. Schjolberg-Henriksen, K., Jensen, G. U., Hanneborg, A. and Jakobsen, H. (2003) Sodium contamination of Si02 caused by anodic bonding, Journal of Micromechanics and Microengineering 13, 845-852.
128. Roberts, D. C. et al. (2003) A piezoelectric microvalve for compact high-frequency, high-differential pressure hydraulic micropumping systems, Journal of Microelectromechanical Systems 12, 81-92.
129. Tian, W. C., Pang, S. W., Lu, C. J. and Zellers, E. T. (2003) Microfabricated preconcentrator-focuser for a microscale gas chromatograph, Journal of Microelectromechanical Systems 12, 264-272.
130. Tong, W. and Williams, R. (1994) Kinetics of surface growth: phenomenology, scaling, and mechanisms of smoothing and roughening, Annu. Rev. Phys. Chem. 45, 401-438.
131. Mullins, W. (1959) Flattening of a nearly plane solid surface due to capillary, J. Appl. Phys. 30, 77-83.
132. Herring, C. (1950) Effect of change of scale on sintering phenomena, J. Appl. Phys. 21, 301-303.
133. Williams, K. R. and Muller, R. S. (1996) Etch rates for micromachining processing, Journal of Microelectromechanical Systems 5, 256-269.
134. Judy, J. W. (2001) Microelectromechanical systems (MEMS): fabrication, design and applications, Smart Mater. Struct. 10, 1115-1134.
135. Dozoretz, P., Stone, C. and Wenzel, O. (2005) Shrinking the Pirani Vacuum Guage, Sensor Technology and Design.
136. Warneke, B., Hoffman, E. and Pister, K. (1995) Monolithic Multiple Axis Accelerometer Design in Standard CMOS, Proc. SPIE 95.
137. Crescini, D., Marioli, D. and Torini, A. (1996) Low-cost accelerometers: two examples in thick film technology, Sensors and actuators A55, pp. 79-85.
138. Shih, J., Xie, J. and Tai, Y.-C. (2003) Surface micromachined and integrated capacitive sensors for microfluidic applications, The 12th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers 2003), Boston, USA, pp. 388-391.
139. MEMS Research Society, http: //mems. interpia98. net.
140. Memsic Inc. (2001) Accelerometer Fundamentals, Application note AN-00MX-001.
141. Yeh, C. and Najafi, K. (1998) CMOS Interface circuitry for a low-voltage micromachined tunnelling accelerometer, Journal of Microelectromechanical Systems 7.
142. Lee, C. W., Zhang, X. M., Tjin, S. C. and Liu, A. Q. (2004) Nano-scale displacement measurement of MEMS devices using fiber optic interferometry, Journal of The Institution of Engineers, Singapore 44(5).
143. Brignell, J. and White, N. (1996) Intelligent Sensor Systems IOP Publishing Ltd, Bristol, ISBN 07503 0389 1.
144. Carro, L., Souza, A. Jr., Negreiros, M., Jahn, G. and Franco, D. (2000) Nonlinear Components for Mixed Circuits Analog Front-End, http: //sigda. org/Archives/ProceedingArchives/Date/papers/2000/date00/pdffiles/07d_3. pdf.
145. Santuria, S. D. (2001) Microsystem Design, Kluwer Academic Publishers, London, pp. 505-509.
146. Zhang, J., Zhang, K., Wang, Z. and Mason, A. (2002) A universal micro-sensor interface chip with network communication bus and highly programmable sensor readout, Proceedings of 45th IEEE MWSCAS Tulsa, OK 2, 246-249.
147. Chavan, A. V., Mason, A., Kang, U. and Wise, K. D. (1999) Programmable mixed voltage sensor readout circuit and bus interface with built in self-test, Proc. 1999 IEEE International Solid-State Circuits Conference.
148. 2 resolution and digital output, IEEE Sensors Journal 3(4).
149. Maloberti, F., Liberali, V. and Malcovatti, P. (1998) Signal processing for smart sensors, Proceedings of Brazilian Symposium on Integrated Circuit Design (SBCCI '98), Búzios, Brazil, pp. 141-148.
150. Huddleston, C. (2003) Digital signal controllers turn thermocouples into superstars, Sensors Online, http: //www. sensorsmag. com/articles/0103/38/main. shtml.
151. Kruglick, E. J. J., Warneke, B. A. and Pister, K. S. J. (1998) CMOS 3-axis accelerometer with integrated amplifier, Proceedings of the Eleventh Annual International Workshop on Micro Electro Mechanical Systems (MEMS98), Heidelberg, Germany, January 25-29. http: //www-bsac. eecs. berkeley. edu/archive /users /warneke-brett /research/cmos. ht m.
152. Luo, H., Fedder, G. and Carley, R. (2000) A lmG lateral CMOS-MEMS accelerometer, Proceedings of the 13th IEEE International Conference on Micro Electro Mechanical Systems (MEMS '00), Miyazaki, Japan, January 23-27, pp. 502-507.
153. Lee, B. N. and Park, H. D. (2000) A signal conditioning circuitry for capacitive accelerometers. Proc AP-ASIC 2000, Korea.
154. How sensors work, MEMS Technology, http: //www. sensorland. com/howpage023. html.
155. Haberli, A., Paul, O., Malcovati, P., Faccio, M., Maloberti, F. and Baltes, H. (1996) CMOS integration of a thermal pressure sensor system, Proceedings of IEEE International Symposium on Circuits and System (ISCAS '96), Vol. I, Atlanta, USA, pp. 377-380.
156. Maloberti, F., Liberali, V. and Malcovatti, P. (1998) Signal processing for smart sensors, Proceedings of Brazilian Symposium on Integrated Circuit Design (SBCCI '98), Búzios, Brazil, pp. 141-148.
157. Koñ, A. A. and Makinwa, J. H. (2002) A Smart CMOS Wind Sensor, ISSCC 2002, USA, February 6.
158. Burr Brown Inc. (1994) Designing photodiode amplifier circuits with OPA128, Application Bulletin SBOAO6I.
159. Bryzek, J. (2003) MEMS-IC integration remains a challenge, PlanetAnalog, October 29.
160. Silicon Designs Inc, Technology Report, http: //www. silicondesigns. com/tech. html.
161. Miller, M. (2004) Manufacturing-aware design helps boost IC yield, EEdesign. com, September 09.
162. Min, R., Bhardwaj, M., Cho, S., Ickes, N., Shih, E., Sinha, A., Wang, A. and Chandrakasan, A. P. (2002) Energy-centric enabling technologies for wireless sensor networks, IEEE Wireless Communications 9(4), 28-39.
163. Wang, A. and Chandrakasan, A. (2002) Energy-efficient DSPs for wireless sensor networks, IEEE Signal Processing Magazine 19(4), 68-78.
164. Ravindran, R. A., Senger, R. M., Marsman, E. D., Dasika, G. S., Guthaus, M. R., Mahlke, S. A. and Brown, R. B. (2003) Increasing the number of effective registers in a low-power embedded processor using a windowed register file, Proc. International Conference on Compilers, Architectures and Synthesis for Embedded Systems, CASES03.
165. Kham, M. N., Houlihan, R. and Kraft, M. (2004) Design & simulation of a mechanical amplifier for inertial sensing applications, Proc. NSTI Nanotech 2001
166. Chandrakasan, A., Amirtharajah, R., Cho, S.-H., Goodman, J., Konduri, G., Kulik, J., Rabiner, W. and Wang A. (1999) Design considerations for distributed microsensor systems, 1999 Proceedings of the IEEE Custom Integrated Circuits Conference, pp. 279-286.
167. Calhoun, B. H., Daly, D. C., Verma, N., Finchelstein, D. F., Wentzloff, D. D., Wang, A., Cho, S.-H. and Chandrakasan A. P. (2005) Design considerations for ultra-low energy wireless microsensor nodes, IEEE Trans. Computers 54(6), 727-740.
168. Min, R., Furrer, T. and Chandrakasan, A. (2000) Dynamic voltage scaling for distributed sensor networks, Invited Talk at Workshop on VLSI (WVLSI'00), http: //www-mtl. mit. edu/research /icsystems /uamps/pubs /.
169. Wang, A. and Chandrakasan, A. (2002) Energy-efficient DSPs for wireless sensor networks, IEEE Signal Processing Magazine 19(4), 68-78.
170. Bhardwaj, M., Min, R. and Chandrakasan, A. (2000) Quantifying and enhancing power awarness in VLSI systems, IEEE Trans. Very large scale Integration (VLSI) Systems 9(6), 757-772.
171. Williams, D. (2004) Alternative power for autonomous MEMs, Colorado Engineer Magazine.
172. Pallas-Areny, R. and Webster, J. (2001) 'Sensors and Signal' Conditioning, John Wiley & Sons, ISBN 0-0471-33232-1.
173. Brignell, J. and White, N. (1996) Intelligent Sensor Systems, IOP Publishing Ltd, Bristol, ISBN 07503-0389-1.
174. Jacobsen, E. and Baum, J. (1997) High performance, dynamically compensated smart sensor system, Motorola Semiconductor Application Note, http: //www. freescale. com/files/sensors/doc/app_note/AN1585. pdf.
175. Johan, H. H. and Van Der Horn, G. (1998) Integrated Smart Sensors: Design and Calibration, Kluwer Academic Publishers, The Netherlands.
176. Dosher (1999) Using iMEMS accelerometers in instrumentation applications, Analog Devices, Technical Note, http: //www. analog. com/industry/iMEMS/library/imems_accl. htm (published 1999 or before).
177. Acar, C. and Shkel, A. (2003) Experimental evaluation and comparative analysis of commercial variable-capacitance MEMS accelerometers, J. Micromech. Microeng. 13, 634-645.
178. Salter, T. D. (1996) A Measurement Technique to Improve Accelerometer Calibration, http: //www. beran. co. uk/transCalAppNotes. htm.
179. McGonigal, J. (2003) Integrated Solutions for Calibrated Sensor Signal Conditioning, Sensors Online, http: //www. sensorsmag. com/articles/0903/65/.
180. Gopel, W., Hesse, J. and Zemet, J. N. (series ed.) (1995) Micro and nanosensor technologies/trends in sensor markets, Sensors 8, (eds.) Meixner, H. and Jones, R. Chapter 2: Approach to microsystem design, VCH.
181. U. Schoneberg et al. (1991) CMOS integated capacitive pressure transducer with on-chip electronics and digital calibration capability, Proc. of the 6th Int. Conf. on Solid State Sensors and Actuators, pp. 304-307.
182. Grigorie, M., de Raad, C., Krummenacher, F. and Enz, C. Analogue Temperature Compensation for Capacitive Sensor Interfaces, www. imec. be/esscirc/papers-96/95. pdf.
183. Yeh, C. and Najafi, K. (1998) CMOS Interface circuitry for a low-voltage micromachined tunnelling accelerometer, Journal of Microelectromechanical Systems 7(1), 6-15.
184. Mozek, M., Resnik, D., Aljančič, U., Vrtačnik, D. and Amon, S. (2002) Calibration procedures for smart measurement systems, Proceedings 9th Electronic Devices and Systems Conference 2002 and Experimental Methods in Acoustic and Electromagnetic Emission International Workshop 2002, June 9-10, 2002, Brno, Czech Republic, Brn, Vysoké uení tecnické v Brn, 2002, str. 389-394. [COBISS. SI-ID 3188564]
185. Application Note 695 (2001) New Ics Revolutionize the Sensor Interface, www. maxim-ic. com/an695.
186. Huddleston, C (2003) Digital Signal Controllers Turn Thermocouples into Superstars, Sensors http: //www. sensorsmag. com/articles/0103/38/main. shtml.
187. Application Note 695 (2001) New Ics Revolutionize the Sensor Interface, www. maxim-ic. com/an695.
188. Allan, R. (2000) ASICs Used to Signal-Condition MEMS Pierzoresistive Silicon Pressure Sensor, ED Online ID #4433, June 26, 2000, http: //www. elecdesign. com/Articles/Index. cfm?ArticleID=4433.
189. Dunbar, M. L. and Allen, H. V. (2003) Performance grows with integration, EE Times, October 07, http: //www. eetimes. com/article/showArticle. jhtml? articleld=16502355.
190. Frank, R. (1996) Understanding Smart Sensors, Artech House, Inc. Boston, London.
191. Selvakumar, A., Yazdy, N. and Najafi, K. (2001) A wide-range micromachined threshold accelerometer array and interface circuit, J. Micromech. Microeng. 11, 118-125.
192. Henry, M. P., Archer, N., Atia, M. R. A., Bowles, J., Clarke, D. W., Fraher, P. M. A., Page, I., Randall, G. and Yang, J. C.-Y. (1996) Programmable hardware architectures for sensor validation, Control Engineering Practice, October 1996.
193. Jacobsen, E. and Baum, J. (1997) High performance, dynamically compensated smart sensor system, Motorola Semiconductor Application Note, http: //www. freescale. com/files /sensors /doc /app. note /AN1585. pdf.
194. Painter, C. C. and Shkel, A. M. (2003) Active structural error suppression in MEMS vibratory rate integrating gyroscope, IEEE Sensors Journal 3(5), 595-606.
195. Sansen, W. M. C., Huijsing, J. H. and van de Plassche, R. J. (1994) Analogue Circuit Design, Mixed A/D Circuit Design, Sensor Interface Circuits and Communications, Kluwer Academics Publisher, ISBN 0792394089.
196. Yazdi, N., Ayazi, F. and Najafi, K. (1998) Micromachined inertial sensors, Proc. IEEE 86(8), 1640-1659.
197. Kraft, M. (2000) Micromachined inertial sensors: the state of the art and a look into the future, IMC Measurement and Control 33(6), 164-168.
198. Timoshenko, S. and Young, D. H. Engineering Mechanics, McGraw-Hill, London, pp. 303-304.
199. Veijola, T., Kuisma, H., Lahdenpera, J. and Ryhanen, T. (1995) Equivalent-circuit model of the squeezed gas film in a silicon accelerometer, Sensors and Actuators A48, 239-248.
200. Starr, J. B. (1990) Squeeze-film damping in solid state accelerometers, IEEE Solid-State Sensor and Actuator Workshop, Hilton Head Island, pp. 44-47.
201. Zhang, L., Cho, D., Shiraishi, H. and Trimmer, W. (1992) Squeeze-film damping in micromechanical systems, ASME, Micromechanical Systems 40, 149-160.
202. Andrews, M., Harris, I. and Turner, G. (1993) A comparison of squeeze-film theory with measurements on a microstructure, Sensors and Actuators A36, 79-87.
203. Marco, S., Samitier, J., Ruiz, O., Herms, A. and Morante, J. (1993) Analysis of electrostatic damped piezoresistive silicon accelerometer, Sensors and Actuators A37-38, 317-322.
204. Peroulis, D., Pacheco, S. P., Sarabandi, K. and Katchi, L. P. B. (2003) Electromechanical considerations in developing low-voltage RF MEMS switches, IEEE Trans. Microwave Theory and Techniques 51(1), 259-270.
205. Bao, M., Yang, H., Yin, H. and Shen, S. (2000) Effects of electrostatic forces generated by the driving signal on capacitive sensing devices, Sensors and Actuators A84, 213-219.
206. Li, B., Lu, D. and Wang, W. (2000) Open-loop operating mode of micromachined capacitive accelerometer, Sensors and Actuators A79, 219-223.
207. Cretu, E., Bartek, M. and Wolffenbuttel, R. F. (1999) Analytical modelling for accelerometers with electrically tunable sensitivity, Proceedings of the International Conference on Modeling and Simulation of Microsystems, USA, pp. 601-604.
208. Analog Devices, ADXL311 Datasheet, Low-cost, ultra compact +/-2g dualaxis accelerometer.
209. van Paemel, M. (1989) Interface circuit for capacitive accelerometer, Sensors and Actuators 17, 629-637.
210. van Kampen, R. P., Vellekoop, M., Sarro, P. and Wolffenbuttel, R. F. (1994) Application of electrostatic feedback to critical damping of an integrated silicon accelerometer, Sensors and Actuators A43, 100-106.
211. Ping, W., Xinmin, Z., Shangshu, D. and Zhenqin, G. (1994) On modelling the dynamic non-linearity of force-balance accelerometers (FBAs), Sensors and Actuators A45, 29-33.
212. Senturia S. (2001) Microsystem Design, Academic Publishers.
213. Boser, B. E. and Howe, R. T. (1996) Surface micromachined accelerometers, IEEE J. Solid-State Circuits 31(3), 336-375.
214. Henrion, W., Disanza, L., Ip, M., Terry, S. and Jerman, H. (1990) Wide dynamic range direct digital accelerometer, IEEE Solid State Sensor and Actuator Workshop, Hilton Head Island, pp. 153-157.
215. Lu, C., Lemkin, M. and Boser, B. (1995) A monolithic surface micromachined accelerometer with digital output, IEEE J. Solid-State Circuits 30(12), 1367-1373.
216. Lemkin, M. A. and Boser, B. (1999) A three-axis micromachined accelerometer with a CMOS position-sense interface and digital offset-trim electronics, IEEE J. of Solid-State Circuits 34(4), 456-468.
217. De Coulon, Y., Smith, T., Hermann, J., Chevroulet, M. and Rudolf, F. (1993) Design and test of a precision servoaccelerometer with digital output, 7th Int. Conf. Solid-State Sensors and Actuators (Transducer '93), Yokohama, pp. 832-835.
218. Smith, T., Nys, O., Chevroulet, M., de Coulon, Y. and Degrauwe, M. (1994) Electro-mechanical sigma-delta converter for acceleration measurements, IEEE International Solid-State Circuits Conference, San Francisco, pp. 160-161.
219. Norsworthy, S. R., Schreier, R. and Temes, G. C. (eds.) (1997) Delta-sigma data converters, Theory, Design and Simulation, IEEE Press, ISBN 0-7803-1045-4.
220. Gaura, E. and Kraft, M. (2002) Noise considerations for closed loop digital accelerometers, Proc. 5th Conf. Modeling and Simulation of Microsystems, Puerto Rico, pp. 154-157.
221. Yazdi, N. and Najafi, K. (2000) Performance limits of a closed-loop micro-G solicon accelerometer with deposited rigid electrodes, Proc. 12th Int. Conf. Microelectronics, Teheran, pp. 313-316.
222. Kraft, M., Redman-White, W. and Mokhtari, M. E. (2001) Closed loop micromachined sensors with higher order SD-Modulators, Proc. 4th Conf. Modeling and Simulation of Microsystems, Hilton Head Island, pp. 104-107.
223. Kajita, T., Moon, U. K. and Temes, G. C. (2002) A two-chip interface for a MEMS accelerometer, IEEE Transactions on Instrumentation and Measurement 51 (4), 853-858.
224. Petkov, V. P. and Boser, B. E. (2004) A fourth-order ∑∆ interface for micromachined inertial sensors, IEEE International Solid-State Circuits Conference (ISSCC), pp. 320-321.
225. Dong, Y. and Kraft, M. (2004) Simulation of micromachined inertial sensors with higher-order single loop sigma-delta modulators, Proc. 6th Conf. on Modeling and Simulation of Microsystems, Boston 1, 414-417.
226. Jiang, X., Wang, F., Kraft, M. and Boser, B. E. (2002) An integrated surface micromachined capacitive lateral accelerometer with 2 uG/rt-Hz resolution, Tech. Digest of Solid State Sensor and Actuator Workshop, Hilton Head Island, USA, pp. 202-205.
227. Xuesong, J., Seeger, J. I., Kraft, M. and Boser, B. E. (2000) A Monolithic surface micromachined Z-axis gyroscope with digital output, Proc. Symp. VLSI Circuits, Hawaii, USA, pp. 16-19.
228. Hecht, E. (1998) Optics, 3rd edition, Addison Wesley Longman Inc., Reading.
229. de Lima Monteiro, D. W. (2002) CMOS-based, Integrated Wavefront Sensor, Delft University Press, Delft, http: //www. library. tudelft. nl/dissertations/PDF-files. 2002/its_lima_20021104. pdf.
230. Tyson, R. (1998) Principles of Adaptive Optics, 2nd edition, Academic Press, San Diego.
231. Tyson, R. (2000) Adaptive Optics-Engineering Handbook, Dekker, New York.
232. Kotova, S. P., Clark, P., Guralnik, I. R., Klimov, N. A., Kvashnin, M. Y., Loktev, M. Y., Love, G. D., Naumov, A. F., Rakhmatulin, M. A., Saunter, C. D. and Vdovin, G. V. (2003) Technology and electro-optical properties of modal liquid crystal wavefront correctors, Journal of Optics A-Pure and Applied Optics 5(5), S231-S238.
233. Borra, E. F. (1995) Liquid mirrors, Can. J. Phys. 73, 109.
234. Vdovin, G., Middelhoek, S. and Sarro, P. (1997) Technology and applications of micromachined silicon adaptive mirrors, Opt. Eng. 36(5), 1382-1390.
235. Fernández, E. J., Iglesias, I. and Artal, P. (2001) Closed-loop adaptive optics in the human eye, Optics Lett. 26(10), 746-748.
236. Liang, J. Z., Williams, D. R. and Miller, D. T. (1997) High resolution imaging of the living human retina with adaptive optics, Investigative Ophthalmology & Visual Science Part 1 38(4), 55.
237. Zhang, Y., Ning, L., Rao, X., Li, X., Wang, C., Ma, X. and Jiang, W. (2002) A small adaptive optical system on table for human retinal imaging, Proc. 3rd Int. Workshop on Adaptive Optics for Industry and Medicine, Albuquerque, USA, pp. 97-103.
238. Iglesias, P. A. (2000) High-resolution retinal images obtained by deconvolution from wavefront sensing, Opt. Lett. 25, 1804-1806.
239. Tyson, R. (2000) Introduction to Adaptive Optics, SPIE Press, Bellingham.
240. Southwell, W. H. (1980) Wavefront estimation from wavefront slope measurements, J. Opt. Soc. Am 70(8), 998-1006.
241. Vdoving, G. (1997) Quick focusing of imaging optics using micromachined adaptive mirrors, Optics Communications 140(4-6), 187-190.
242. Liang, J. Z., Williams, D. R. and Miller, D. T. (1997) Supernormal vision and high-resolution retinal imaging through adaptive optics, J. Opt. Soc. Am. A 14(11), 2884-2892.
243. Loktev, M. Y., Belopukhov, V. N., Vladimirov, F. L., Vdovin, G., Love, G. and Naumov, A. (2000) Wave front control systems based on modal liquid crystal lenses, Rev. Sci. Instrum. 71(9), 3290-3297.
244. Vdovin, G., Loktev, M. and Naumov, A. (2003) On the possibility of intraocular adaptive optics, Opt. Express 11(7), 810-817.
245. Albert, O., Sherman, L., Mourou, G. and Norris, T. B. (2000) Smart microscope: an adaptive optics learning system for aberration correction in multiphoton confocal microscopy, Opt. Lett. 25(1), 52-54
246. Roddier, F. (1999) Adaptive Optics in Astronomy, Cambridge University Press.
247. Levine, B. M., Martinsen, E. A., Wirth, A., Jankevics, A., Toledo-Quinones, M., Landers, F. and Bruno, T. L. (1998) Horizontal line-of-sight turbulence over near-ground paths and implications for adaptive optics corrections in laser communications, Applied Opt. 37(21), 4553-4560.
248. Hofer, H., Artal, P., Singer, B., Aragon, J. L. and Williams, D. R. (2001) Dynamics of the eyes wave aberration, J. Opt. Soc. Am. A 18(3), 497-506.
249. Herzig, H. (1997) Micro-optics: Elements, Systems and Applications, Taylor and Francis, London.
250. Daly, D. (2001) Microlens Arrays, Taylor and Francis, London.
251. Pitchumani, M., Mohammed, W., Hockel, H. and Johnson, E. G. (2004) Presculpting of photoresist using additive lithography, Proc. SPIE 5347, 85-94.
252. Kendall, D. L., Eaton, W., Manginell, R. and Digges, Jr. T. (1994) Micromirror arrays using KOH: H20 micromachining of silicon for lens templates, geodesic lenses, and other applications, Opt. Eng. 33(11), 3578-3588.
253. de Lima Monteiro, D. W., Akhzar-Mehr, O., Sarro, P. and Vdovin, G. (2003) Single-mask microfabrication of aspherical optics using KOH anisotropic etching of Si, Optics Express (www. opticsexpress. org) 11(18), 2244-2252.
254. de Lima Monteiro, D. W. and Nirmaier, T. (2003) CMOS technology in Hartmann-Shack wavefront sensing, to be published in the Proc. 4th Adaptive Optics Conference for Industry and Medicine, Münster-Germany.
255. Lazzaro, J. et al. (1989) Winner-take-all networks of O(N) complexity, Proc. Neural Information Processing Systems (NIPS), Denver-USA, p. 703.
256. Droste, D. and Bille, J. (2002) An ASIC for Hartmann-Shack wavefront detection, IEEE J. Solid-State Circ. 37(2).
257. Nirmaier, T. Pudasaini, G. and Bille, J. (2003) Very fast wavefront measurements at the human eye with a custom CMOS-based Hartmann-Shack sensor, Opt. Express 11(21), 2704-2716.
258. Nirmaier, T. (2003) A CMOS-based Hartmann-Shack Sensor for Real-time Adaptive Optical Applications, PhD Thesis, University of Heidelberg.
259. de Lima Monteiro, D. W., Vdovin, G. and Sarro, P. M. (2004) High-speed wavefront sensor compatible with standard CMOS technology, Sensors and Actuators A 109(3), 220-230.
260. Fossum, E. R. (1993) Active pixels sensors-are CCDs dinosaurs? Proc. SPIE 1900, 2-14.
261. Mendis, S. K., Kemeny, S., Gee, R., Pain, B., Kim, Q. and Fossum, E. (1994) Progress in CMOS active pixel image sensors, Proc. SPIE, 2172, 19-29.
262. Wong, H. (1996) Technology and device scaling considerations for CMOS imagers, IEEE Trans. Electr. Dev. 43(12), 2131-2142.
263. Vdovin, G. and Sarro, P. M. (2002) Micromachined membrane deformable mirrors for laser applications, Proc. 3rd Int. Workshop on Adaptive Optics for Industry and Medicine, Albuquerque, USA, pp. 35-48.
264. Dayton, D., Restaino, S., Gonglewski, J., Gallegos, J., McDermott, S., Browne, S., Rogers, S., Vaidyanathan, M. and Shilko, M. (2000) Optics Communications 176, 339-345.
265. Gonte, F., Courteville, A. and Dandliker, R. (2002) Optical Engineering 41(5), 1073-1076.
266. Druon, F., Cheraux, G., Faure, J., Nees, J., Nantel, M., Maksimchuk, A., Mourou, G., Chanteloup, J. C. and Vdovin, G. (1998) Optics Letters 23, 1043.
267. Vdovin, G. and Kiyko, V. (2001) Optics Letters 26(11), 798-800.
268. Press, W., Teukolsky, S. Vetterling, W. and Flannery, B. (1992) Numerical Recipes in C-The Art of Scientific Computing, 2nd edition Cambridge University Press, Cambridge, pp. 408-412.
269. Williams, G. (1984) Linear Algebra with Applications, Allyn and Bacon Inc., Newton.
270. Culshaw, B. (2001) Complex adaptive structures: design considerations, complex adaptive structures, W. B. Spillman, Jr., (ed), Proc. SPIE 4512, 13-24.
271. Hykin, S. (1994) Neural Networks, A Comprehensive Foundation, Macmillian College Publishing Company, Inc. New York, USA, ISBN 0-02-352761-7.
272. Yabuta, T. and Manabe, T. (1994) Learning control aspects in terms of neurocontrol. In: Zurada, M. (ed.) Computational Intelligence Imitating Life, IEEE Press, New York, pp. 328-339.
273. Omatu, M. K. and Yusof, R. (1996) Neuro-Control and its Applications. Advances in Industrial Control, Springer-Verlag, London.
274. Narendra, K. S. and Parthasarathy, K. (1990) Identification and control of dynamical systems using neural networks, IEEE Trans. Neural Networks 1(1), 4-27.
275. Mitchell, R. J. and Bishop, J. M. (1995) Speech, vision and colour applications. In: Irwin, G. W., Warwick, K. and Hunt, K. J. (eds.) Neural Networks Applications in Control, IEE Control Engineering Series 53, Short Run Press Ltd., UK.
276. Faggin, F. and Mead, C. (1990) VLSI implementation of neural networks. In: Zorneter, S. F. (ed.) An Introduction to Neural and Electronic Networks, Academic Press Inc., Arlington, Virginia, USA, pp. 275-300.
277. Kraft, L. G. and Campagna, D. P. (1989) A comparison between CMAC neural networks control and two traditional adaptive control systems. In: Proceedings of American Control Conference, Pittsburg, Pennsylvania, Paper No. 3. 13, pp. 483-489.
278. Warwick, K. (1995). Neural networks: an introduction. In: Irwin, G. W., Warwick, K. and Hunt, K. J. (eds.) Neural Network Applications in Control, IEE, London, UK, pp. 1-16.
279. Zbikowski, P. J. (1992) A survey of neural networks for control. In: Warwick, K. Irwin, G. W. and Hunt, K. J. (eds.) Neural Networks for Control and Systems, Peregrinus on behalf of IEE, London.
280. Billings, S. A. and Chen, S. (1992) Neural networks and system identification. In: Irwin, G. W., Warwick, K. and Hunt, K. J. (eds.) Neural Networks Applications in Control, IEE, London, UK.
281. Kraft, M. (1997) Closed-loop Accelerometer Employing Oversampling Conversion, PhD Thesis, Coventry University, UK.
282. Gaura, E., Kraft, M., Steele, N. and Rider, R. J. (1999) A comparison of approaches for the design of closed-loop micromachined accelerometers, Journal of Systems Science, Poland 25(4).
283. Hunt, K. J. and Sbarbaro, D. (1995). Studies in artificial neural networks based control. In: Irwin, G. W., Warwick, K. and Hunt, K. J. (eds.) Neural Networks Applications in Control, Chapter 6, IEE Control Engineering Series, London.
284. Kuschewski, J., Hui, S. and Zak, S. H. (1993) Application of feedforward neural networks to dynamic systems identification and control, IEEE TransControl System Technology 1(1), 37-49.
285. Montague, G. A., Willis, M. J., Tham, M. T. and Morris, A. J. (1991) Artificial neural networks based multivariable predictive control. In: Proceedings of the Second International Conference on Artificial Neural Networks, UK, pp. 119-123.
286. Turner, P., Morris, J. and Montague, G. (1995) Applications of dynamic artificial neural networks in state estimation and non-linear process control. In: Irwin, G. W., Warwick, K. and Hunt, K. J. (eds.) Neural Networks Applications in Control, IEE Control Engineering Series 53, Short Run Press Ltd., UK.
287. Willis, M. J., Montague, G. A., DiMassimo, C., Tham, M. T. and Morris, A. J. (1992) Artificial neural networks in process estimation and control, Automatica 28(6), 1181-1187.
288. Adam, O., Zarader, J. L. and Milgram, M. (1993) Identification and prediction of non-linear models with recurrent neural networks. In: Proceedings of New Trends in Neural Computation International Workshop on Artificial Neural Networks. IWANN '93, Springer-Verlag, Berlin, Germany, pp. 530-535.
289. Omatu, S. (1994) Learning of neural controllers in intelligent control systems. In: Zurada, M. (ed.) Computational Intelliqence Imitatinq Life, IEEE Press, New York, pp. 285-292.
290. Tzirkel-Habcock, E. and Fallside, F. (1991) A direct control method for a class of non-linear systems using neural networks. In: Proceedings of the Second International Conference on Artificial Neural Networks, UK, pp. 134-138.
291. Darlington, P. (1991) Estimation and neurocontrol in the presence of feedback. In: Proceedings of the Second International Conference on Artificial Neural Networks, UK, pp. 300-303.
292. Gaura, E. and Burian, A. (1994) Dedicated environment for BKP neural networks synthesis. In: Proceedings of Medical Informatics Conference, Iasi, Romania, pp. 79-82.
293. Gaura, E. and Burian, A. (1995) The backpropagation algorithm and its derivations: comparative performances. In: Proceedings of the Second International Symposium of Economic Informatics, Bucharest, Romania, pp. 95-101.
294. Kraft, M., Lewis, C. P. and Hesketh, T. G. (1998) Closed loop silicon accelerometers, IEE Proceedings, Circuits, Devices and Systems 145(5), 325-331.
295. Lewis, C. P., Hesketh, T. G., Kraft, M. and Florescu, M. (1999) A digital pressure transducer, Trans. Inst. Meas. Control 20(2), 98-102.
296. Zimmermann, L., Ebersohl, J., Le Hung, F., Berry, J. P., Baillieu, F., Rey, P., Diem, B., Renard, S. and Caillat, P. (1995) Airbag application: a microsystem including a silicon capacitive accelerometer, CMOS switched capacitor electronics and true self-test capability, Sensors and Actuators A46-47, 190-195.
297. Chau, K., Lewis, S. R., Zhao, Y., Howe, R. T., Bart, S. F. and Marcheselli, R. G. (1996) An integrated force balanced capacitive accelerometer for low-g applications, Sensors and Actuators A54, 472-476.
298. Gaura, E. and Burian, A. (1995) A dedicated medium for the synthesis of BKP networks, Romanian J. Biophysics, Bucharest, Romania 5(15), 26-32.
299. Gaura, E. (2000) Neural Network Techniques for the Control and Identification of Acceleration Sensors, PhD Thesis, Coventry University, UK.
300. Graf, H. P. and Henderson, D. (1990) A reconfigurable CMOS neural network. In: Proceedings of IEEE International Solid-State Circuits, pp. 145-146.
301. Akers, L. A., Ferry, D. and Grondin, O. (1990) Synthetic neural systems in VLSI. In: Zorneter, S. F. (ed.) An Introduction to Neural and Electronic Networks, Academic Press Inc., Arlington, Virginia, USA, pp. 317-337.
302. Gaura, E., Festila, L. and Lupea, D. (1996) Studies on a VLSI neural network for solving linear equations systems. In: Proceedings of Mixed Design of Integrated Circuits and System, Education of CAD of Modem IC's and Devices, Lodz, Poland, pp. 431-434.
303. Graf, H. P. and Jackel, L. D. (1989) Analog electronic neural network circuits, IEEE Circuits and Devices Mag. pp. 44-55.
304. Tombs, J. and Tarassenko, L. (1991) A fast, novel, cascadable design for multilayer networks. In: Proceedings of the Second International Conference on Artificial Neural Networks, UK, pp. 64-68.
305. Atlas, L. E. and Suzuki, Y. (1989) Digital systems for artificial neural networks, IEEE Circuits and Devices Mag. pp. 20-24.
306. Kosmatopoulos, E. B. and Christodoulou, M. A. (1992) Dynamical Distributed Neural Networks for Non-linear System Identification, Neural Networks World 3-4, 241-268.
307. Irwin, G. W., O'Reilly, P., Lightbody, G. and Brown, M. (1995) Electric power and chemical process applications. In: Irwin, G. W., Warwick, K. and Hunt, K. J. (eds.) Neural Networks Applications in Control, IEE Control Engineering Series 53, Short Run Press Ltd., UK.
308. Gaura, E., Steele, N. and Rider, R. J. (1999b) A neural network approach for the identification of micromachined accelerometers. In: Proceedings of the Second International Conference on Modelling and Simulation of Microsystems, MSM'99, San Juan, Puerto Rico, pp. 245-248.
309. Poopalasingam, S. (1995) Neural Network Based Digital Compensation Schemes for Industrial Pressure Sensors, PhD Thesis, Coventry University.
310. White, N. (2001) Smart move for intelligent sensors, Sensor Review 21(1), Viewpoint.
311. Ko, W. H. and Fung, C. D. (1982) VLSI and intelligent transducers, Sensors and Actuators 2, 239-250.
312. Varadan, V. K. (2001) MEMS-and NEMS-based complex adaptive smart devices and systems, Proc. SPIE, Complex Adaptive Structures, William B. Spilman (ed) 4512, 25-45.
313. Ranky, P. G. (2002) Smart sensors, Sensor Review 22(Issue 4), 301-311.
314. Gardner, Microsensors, MEMS and Smart Devices.
315. Frank, R., Understanding Smart Sensors.
316. Breckenridge, R. A. and Husson, C. (1978) Smart sensors in spacecraft-The impact and trends, American Institute of Aeronautics and Astronautics and NASA, Conference on 'Smart' Sensors, Hampton, VA., Novmber 14-16, AIAA, 6 p.
317. Yamasaki, H. (Ed.) (1996) Intelligent Sensors, Elsevier Science.
318. Corcoran, P. and Lowery, P. (1995) Neural network applications in multisensor systems, Sensor Review 15(4), 15-18.
319. Roberts, S. J. and Penny, W. (1997) Neural networks: friends or foes? Sensor Review 17(1), 64-70.
320. Dong, T. A. (2003) Cascade Back-propagation Learning in Neural Networks, http: //www. nasatech. com/Briefs/May03/NP019289. html.
321. Fang, W. C., Sheu, B. J. and Wall, J. (1998) VLSI neural processors based on optimisation neural networks, NASA Briefs, http: //www. nasatech. com/Briefs/jan98/NPO 19989. html.
322. Fang, W.-C. (2000) Low-power Fast Machine Vision System on a Single IC Chip, http: //www. nasatech. com/Briefs/FebOO/NP020449. html.
323. George, M. H. (1997) TESPAR paves the way for smart sensors, Sensor Review 17(2), 131-137.
324. Goodwin, M. (1994) Neural processing set to boost sensor technology, Sensor Review 14(3), 20-22.
325. Djahanshahi, H. et al. (2001) Quantization noise improvement in a hybrid distributed neuron ANN architecture, IEEE Trans. Circuits and Systems II: Analogue and Digital Signal Processing 48(9), 842-846.
326. Faggin, F. and Mead, C. (1990) VLSI implementation of neural networks, In: Zorneter, S. F. (ed.) An Introduction to Neural and Electronic Networks, Academic Press Inc., Arlington, Virginia, USA, pp. 275-300.
327. Lindsey, C. S. (2002) Neural Networks in Hardware: Architectures, Products and Applications, Lecture notes, http: //www. particle. kth. se/~lindsey/HardwareNNWCourse/home. html.
328. Yihua Liao, Neural Networks in Hardware: A Survey, http: //ailab. das. ucdavis. edu/~yihua/research/NNhardware. pdf.
329. Pereira, D., Silva Girao, J. M. and Postolache, O. (2001) Fitting transducer characteristics to measured data, IEEE Instrumentation and Measurement Mag., December, pp. 26-39.
330. Kraft, M. and Gaura, E. (2001) Intelligent control for a micromachined tunnelling accelerometer, Proc. Int. MEMS Workshop (IMEMS), pp. 738-742, Singapore.
331. Patra, J. C., Van den Bos, A. and Kot, A. C. (2000) An ANN-based smart capacitive pressure sensor in dynamic environment, Sensors and Actuators 86, 26-38.
332. Patra, J. C. and van der Bos, A. (2000) Auto-calibration and compensation of a capacitive pressure sensor using multilayer perceptrons, ISA Trans. 39, 175-190.
333. Almodarresi, S. and White, N. M. (1999) Application of artificial neural networks to intelligent weighing systems, IEE Proc.-Sci. Meas. Technol. 146(6), 265-269.
334. Narayanan, S. and Marks, R. J. (2002) Set constraint discovery: Missing sensor data restoration using auto-associative regression machines, Proc. IEEE World Congress on Computational Intelligence, Hawai, pp. 2872-2877.
335. Hines, J. W., Uhrig, R. E. and Wrest, D. J. (1997) Use of autoassociative neural networks for signal validation, Proc. NEURAP97, http: //web. utk. edu/~hines/publications. html.
336. Hines, J. W. and Gribock, A. V. et al. (2000) Improved methods for on-line sensor calibration verification, Proc. 8th Int. Conf. Nuclear Engineering, USA, http: //web. utk. edu/~hines/publications. html.
337. Mei, T., Ge, Y., Chen, Y., Ni, L., Liao, W. H., Xu, Y. S. and Li, W. J. (1999) Design and fabrication of an integrated three-dimensional tactile sensor for space robotic applications, IEEE MEMS 99', Orlando, USA, pp. 112-117.
338. Lee, C., Kim, J., Babcock, D. and Goodman, R. (1997) Application of neural network to turbulence control for drag reduction, Phys. Fluids 9, 1740-1747.
339. Koosh, V. and Babcock, D. et al. (1996) Active drag reduction using neural networks, Proc. Int. Workshop on Neural Networks for Identification, Control, Robotics, and Signal/Image Processing, http: //www. rodgoodman. ws/Active%20Skin. htm.
340. Valentin, N. and Denoeux, T. (2001) A neural network-based software sensor for coagulation control in water treatment plant, Intelligent Data Analysis 5, 23-39.
341. Gardner, J. W., Cole, M. and Udrea, F. (2002) CMOS gas sensors and smart devices, Proc. IEEE Sensors 2002 1, 721-726.
342. Roppel, T., Wilson, D. M., Dunman, K., Becanovic, V. and Padgett, M. L. (1999) Design of a low-power, portable sensor system using embedded neural networks and hardware preprocessing, Proc. Int. Joint Conference on Neural Networks IJCNN'99, Washington, D. C., July 10-16.
343. Lee, D. S. et al. (2002) SnO2 gas sensing array for combustible and explosive gas leakage recognition, IEEE Sensors Journal 2(3), 140-149.
344. Colin, J. (2001) Smart Sensors Extend Web Scale, April, EETimes.
345. Hand, C. (2002) ANNs for Organizing Sensor Webs, http: //www. nasatech. com/Briefs/july02/NP030317. html.
346. Leopold, G. (2003) US Military Deploys Neural Network Technology, March, EETimes.
347. NASA (1998) Neural Network Based Sensor Validation, http: //www. grc. nasa. gov/WWW/cdtb/projects/fdia/nnsv. html.
348. Xu, X., Hines, J. W. and Uhrig, R. E. (1999) Sensor validation and fault detection using neural networks, Proc. Maintenance and Reliability Conference (MARCON 99), Gatlinburg, TN, http: //web. utk. edu/~hines/publications. html.
349. NASA (1998) Neural Network Based Sensor Validation, http: //www. grc. nasa. gov/WWW/cdtb/projects/fdia/nnsv. html.
350. Gaura, E. I. and Newman, R. M. (2003) Intelligent sensing: Neural network based health diagnosis for sensor arrays, Proc. Advanced Intelligent Mecha-tronic, Japan, pp. 36-365.
351. Ahmed, H. and Moussa, W. A. (2003) Optimising the performance of electrostatic comb-drive actuators using neural networks, Proc. Int. Conf. MEMS, NANO and Smart Systems, Alberta, Canada, pp. 62-68.
352. Liang, Y. C. et al. (2001) A neural-network-based method of model reduction for the dynamic simulation of MEMS, J. Micromech. Microeng. 11, 226-233.
353. Zhou, N., Agogino, A. and Pister, K. (2002) Automated design synthesis for micro-electro-mechanical systems (MEMS), Proc. DETC 2002: Design Automation, Montreal, Canada, http: //best. me. berkeley. edu/~aagogino/Papers. total. word. html.
354. Price, D., Scott, A., Edwards, G., Batten, A., Farmer, A., Hedley, M., Johnson, M., Lewis, C., Poulton, G., Prokopenko, M., Valencia, P. and Wang, P. (2003) An Integrated Health Monitoring System for an Ageless Aerospace Vehicle, Structural Health Monitoring 2003: From Diagnostic & Prognosis to Structural Health Management, Fu-Kuo Chang (ed.), DEStech Publications (Lancaster PA), pp. 310-318, www. ict. csiro. au/CISD/Publications/NDE/IWSHM4%20Paper%20031015. pdf.
355. Henry, M. P. (1994) Validating data from smart sensors, J. Control Engineering 41(9), 63-66.
356. Culshaw, B. (2001) Complex adaptive structures: design considerations, Proceedings of SPIE 4512.
357. Varajan, V. K. and Varajan, V. V. (2000) Microsensors, microelectromechanical systems (MEMS) and electronics for smart systems and structures, Smart Materials Structures 9, 953-972, IOP Publishing Ltd.
358. Doherty, L., Warneke, B. A., Boser, B. E. and Pister, K. S. J. (2001) Energy and performance considerations for smart dust, International Journal of Parallel and Distributed Systems and Networks 4(3).
359. Warneke, B. A. and Pister, K. S. J. (2002) Exploring the limits of system integration with smart dust, Proc. IMECE 2002, ASME.
360. Hsu, V., Kahn, J. M. and Pister, K. S. J. (1998) Wireless Communications for Smart Dust, Electronics Research Laboratory Technical Memorandum Number M98/2.
361. Anastasi, G., Falchi, A., Passarella, A., Conti, M. and Gregori, E. (2004) Performance measurements of motes sensor networks, Proceedings of the 7th ACM International Symposium on Modeling, Analysis and Simulation of Wireless and Mobile Systems.
362. King, R. Intel Mote, presentation at Berkeley Wireless Research Center, http: //bwrc. eecs. berkeley. edu/Seminars/King-6. 27. 03/Intel%20Seminar. ppt.
363. http: //www. xbow. com/Products/Wireless-Sensor_Networks. htm.
364. Rigge, L. and Grewe, T. (2003) Tradeoffs Shape Multimode WLAN Silicon Designs, URL: http: //www. commsdesign. com/showArticle. jhtml? articleID=16500948, Agere Systems.
365. ARM Ltd., ARM Technical Support FAQs, http: //www. arm. com/support/faqip/3735. html.
366. Yang, S., Bai, P., Bramblett, T., Crew, B., Hussein, M., Jacob, P., Kenyon, C., Mcintyre, B., Moon, P., Sivakumar, S., Tufts, B., Thompson, S., Tyagi, S. and Bohr, M. (2000) A 130 nm Generation Logic Technology Featuring 70 nm Transistors, Dual VT Transistors and 6 Layers of Cu Interconnects, International Electron Device Meeting, San Francisco.
367. Fenner, R. L., Kleefstra, M. and Zdankiewicz, E. (2002) A micromachined water vapor sensor for home appliances (Sensor Technology and Design), Sensors Magazine.
368. The IEEE Family of Transducer Interface Standards (2003) Roger Allan, (ed.) Online ID #2990, http: //www. elecdesign. com/Articles/ArticleID/2990/2990. html.
369. Berge, J. (2001) Fieldbuses for Process Control: Engineering, Operation and Maintenance, ISA.
370. Elmenreich, W. and Pitzek, S. (2003) Smart transducers-principles, communications and configuration, Proceedings of the 7th IEEE International Conference on Intelligent Engineering Systems (INES), pp. 510-515.
371. The IEEE Family of Transducer Interface Standards (2003) Roger Allan (ed.) Online ID #2990, http: //www. elecdesign. com/Articles/ArticleID/2990/2990. html.
372. Lee, K. (2003) The smart transducer interface standard, NIST Workshop on Data Exchange Standards at the Construction Site, USA, May 29, http: //www. bfrl. nist. gov/861/CMAG /CMAG. workshop/lee. pdf.
373. Silicon Microstructures Inc, http: //www. si-micro. com/.
374. Kopetz, H., Holzmann, M. and Elmenreich, W. (2001) A universal smart transducer interface: TTP/A, International Journal of Computer System Science & Engineering 16(2), 71-77.
375. Flamini, A., Ferrari, P., Sisinni, E., Marioli, D. and Taroni, A. (2002) Sensor interfaces: from field-bus to Ethernet and Internet, Sensors and Actuators A 101, 194-202.
376. Want, R. (2004) Enabling Ubiquitous Sensing with RFID, Computer, pp. 84-86, IEEE Computer Society Publications.
377. KSW Mikrotek Gmbh, http: //www. ksw-microtec. de/www/startseite_ de. php.
378. Freescale Semiconductor Inc, http: //www. freescale. com/webapp/sps/site/application. jsp?nodeId=02WcbfNZnLNnms&tid=tAhl.
379. Robert Bosch gmbh (1991) CAN specification Version 2.
380. Sohabri, K., Gao, J., Ailawadhi, V. and Pottie, G. J. (2000) Protocols for selforganisation of a wireless sensor network, IEEE Personal Communications 7(5), 16-27.
381. Marshall, W., Roadknight, C., Wokoma, I. and Sacks, L. (2003) Selforganizing sensor networks, UbiNet 2003, London, UK.
382. Martinez, K., Ong, R., Hart, J. K. and Stefanov, J. (2004) GLACSWEB-a sensor web for glaciers. Adjunct Proc. EWSN 2004, Berlin, Germany.
383. Pursley, M. B., Russell, H. B. and Wysokarski, J. S. (1999) Energy efficient routing in frequency hop networks with adaptive transmission, Proc. IEEE Military Communications ConferenceMILCOM.
384. Raghaven, A. R., Baum, C. W. and Russell, H. B. (1999) A distance-vector routing protocol with consistency checking for mobile distributed direct-sequence packet radio networks, IEEE Military Communications ConferenceMILCOM.
385. Sohabri, et al. (2000) Protocols for selforganisation of a wireless sensor network, IEEE Personal Communications 7(5), 16-27.
386. Estrin, D., Govindan, R., Heidemann, J. and Kumar, S. (1999) Next century challenges: scalable co-ordination in sensor networks, Proc. 5th Annual ACM/IEEE International Conference on Mobile Computing and Networking, pp. 263-270.
387. Ye, F., Chen, A., Liu, S. and Zhang, L. (2001) A scalable solution to minimum cost forwarding in large sensor networks, Proc 10th International Conference on Computer Communications and Networks, pp. 304-309.
388. Heinzelman, W., Kulik, J. and Balakrishnan, H. (1999) Adaptive protocols for information dissemination in wireless sensor networks, Proc 5th Annual ACM/IEEE International Conference on Mobile Computing and Networking.
389. Heinzelman, W, Chandrakasan, A. and Balakrishnan, H. (2000) Energy efficient communication protocol for wireless micro sensor networks, Proc 33rd Annual Hawaii International Conference on System Sciences, pp. 3005-3014.
390. Manjeshwar, A. and Agrawal, D. P. (2001) TEEN: a routing protocol foren-hanced efficiency in wireless sensor networks, International Proceedings of 15th Parallel and Distributed Processing Symposium, pp. 2009-2015.
391. Lindsey, S. and Raghavendra, C. S. (2001) PEGASIS: Power efficient gathering in sensor information systems, Proc. International Conference on Communications.
392. Corson, S. and Macker, J. (1999) RFC-2501 Mobile ad hoc Networking (MANET): Routing Protocol Performance Issues and Evaluation Considerations, http: //www. rfc-editor. org/rfc/rfc2501. txt.
393. Park, V. and Corson, S. (1999) Temporally-Ordered Routing Algorithm (TORA) Version 1 Functional Specification, http: //ftp. sunet. se/pub/Internet-documents/internet-drafts/dr aft-ietf-manet-aodv-05. txt.
394. Perkins, C. and Royer, E. (2000) Ad Hoc On Demand Distance Vector Routing, http: //ftp. sunet. se/pub/Internet-documents/internet-drafts/draft-ietf-manet-aodv-05. txt.
395. Broch, J., et al. (1999) The Dynamic Source Routing Protocol for Mobile Ad-Hoc Networks, http: //ftp. sunet. se/pub/Internet-documents/mternet-drafts/draft-ietf-manet-dsr-03. txt.
396. Ahn, G.-S., et al. INSIGNIA, http: //ftp. sunet. se/pub/Internet-documents/internet-drafts /draft-ietf-insigniaO 1. txt.
397. Aggelou, G. and Tafazolli, R. (1999) Relative Distance Micro-discovery Ad Hoc Routing (RDMAR) Protocol, http: //ftp. sunet. se/pub/Internet-documents /internet-drafts /draft-ietf-manet-rdmar-00. txt.
398. Garcia-Luna-Aceves, J. J. (1999) Source Tree Adaptive Routing (STAR) Protocol, http: //ftp. sunet. se/pub/Internet-documents/internet-drafts/draft-ietf-manet-star-00. txt.
399. Lee, S.-J., et al. (2000) On-Demand Multicast Routing Protocol (ODMRP) for Ad-Hoc Networks, http: //ftp. sunet. se/pub/Internet-documents/internet-drafts /draft-ietf-manet-odmrp-02. txt.
400. Savarese, C. and Rabaey, J. (2001) Locationing in distributed ad hoc wireless sensor networks, IEEE Proceedings on Acoustics, Speech and Signal Processing, pp. 2037-2040.
401. Bulusu, N., Heidemann, J. and Estrin, D. (2000) GPS-less low-cost outdoor localization for very small devices, IEEE Personal Communication.
402. Girod, L. and Estrin, D. (2001) Robust range estimation using acoustic and multimodal sensing, Intelligent Robots and Systems, Proceedings 2001 IEEE/RSJ International Conference 3(29).
403. Nagpal, R., Shrobe, H. and Bachrach, J. (2003) Organizing a global coordinate system from local information on an ad hoc sensor network, 2nd International Workshop on Information Processinq in Sensor Networks IIPSN 03λ Palo Alto, CA.
404. Niculescu, D. and Nath, B. (2001) Ad Hoc Positioning System (APS), Global Telecommunications Conference, 2001, GLOBECOM '01. IEEE 5, 25-29.
405. Iyengar, R. and Sikdar, B. (2003) Scalable and distributed GPS free positioning for sensor networks, Communications, Volume 1.
406. Nasipuri, A. and Li, K. (2002) A Directionality Based Location Discovery Scheme for Wireless Sensor Networks, WSNA '02, Atlanta, Georgia, USA.
407. http: //www. uswcorp. com/USWCmainpages/our. htm.
408. Bulusu, N., Heidemann, J. and D. Estrin (2001) Adaptive Beacon Placement. Distributed Computing Systems.
409. He, T., Huang, C., Blum, B. M., Stankovič, J. A. and Abdelzaher, T. (2003) Range-Free Localization Schemes for Large Scale Sensor Networks, Mobi-Com'03, San Diego, CA, USA.
410. Patwari, N. and Hero, A. O. III, Using Proximity and Quantized RSS for Sensor Localization in Wireless Networks, WSNA'03, San Diego, CA, USA.
411. Romer, K. (2001) Time synchronization In ad hoc networks, Proc. 2001 ACM Int. Symp. Mobile Ad Hoc Networking and Computing (MobiHoc'01), Long Beach, CA.
412. Mansouri-Samani, M. and Sloman, M. (1997) GEM-a generalised event monitoring language for distributed systems, IEE/IOP/BCS Distributed Systems Engineering Journal 4(25).
413. Nelson, G. J. (1998) Context-Aware and Location Systems, PhD thesis, University of Cambridge.
414. Shim, Y. C. and Ramamoorthy, C. V. (1990) Monitoring and control of distributed systems, First Int. Conference of Systems Integration, Morristown, USA, pp. 672-681.
415. Hayton, R. (1996) OASIS: An Open Architecture for Secure Interworking Services, PhD thesis, University of Cambridge.
416. Lamport, L. (1978) Time, clocks, and the ordering of events in a distributed system, Communications of the ACM 21(4), 558-565.
417. Mattern, F. (1998) Virtual time and global states in distributed systems, Workshop on Parallel and Distributed Algorithms, Chateau de Bonas.
418. Kearns, J. P. and Koodalattupuram, B. (1989) Immediate ordered service in distributed systems, 9th Int. Conf. Distributed Computing Systems (ICDCS 89), Newport Beach, USA, pp. 611-618.
419. Schiper, A., Eggli, J. and Sandoz, A. (1989) A new algorithm to implement causal ordering, Workshop on Distributed Algorithms, Nice, France, pp. 219-232.
420. Quaireau, S. and Laumay, P. (2001) Ensuring applicative causal ordering in autonomous mobile computing, Workshop on Middleware for Mobile Computing (Middleware 2001), Heidelberg, Germany.
421. Skawratananond, C., Mittal, N. and Garg, V. K. (1998) A Lightweight Algorithm for Causal Message Ordering in Mobile Computing Systems, Technical Report TR-PDS-1998-11, Parallel and Distributed Systems Group, University of Texas at Austin.
422. Birman, K. P. and Joseph, T. A. (1987) Reliable communication in the presence of failures, ACM Transactions on Computer Systems 5(1), 47-76.
423. Garcia-Molina, H. and Spauster, A. (1991) Ordered and reliable multicast communication, ACM Transactions on Computer Systems 9(3), 242-271.
424. Jia, X. (1995) A total ordering multicast protocol using propagation trees, IEEE Transactions on Parallel and Distributed Systems 6(6), 617-627.
425. Ng, T. P. (1991) Ordered broadcasts for large applications, IEEE Int. Conf. Distributed Computing Systems.
426. Elson, J. and Romer, K. (2002) Wireless sensor networks: a new regime for time synchronization, Proceedings of the First Workshop on Hot Topics in Networks (HotNets), Princeton, New Jersey, USA.
427. Girod, L., Bychkovskiy, V., Elson, J. and Estrin, D. (2002) Locating tiny sensors in time and space: a case study, Proceedings of the International Conference on Computer Design (ICCD 2002), Freiburg, Germany.
428. Ganeriwal, S., Kumar, R. and Srivastava, M. B. (2003) Timing-sync protocol for sensor networks. SenSys'03, Los Angeles, CA, USA.
429. Elson, J. and Estrin, D. (2001) Time sychronisation for wireless sensor networks, International Proceedings of 15th Parallel and Distributed Processing Symposium, pp. 1965-1970.
430. Karp, R., Elson, J., Estrin, D. and Shenker, S. (2003) Optimal and Global time Synchronization in Sensomets, CENS Technical Report 0012.
431. Varajan, V. K. and Varajan, V. V. (2000) Conformal and embedded IDT micro sensors for health monitoring of structures, Smart Structures and Materials 2000: Smart Electronics and MEMS, Proceedings of SPIE 3990.
432. Krantz, D., Belk, J., Biermann, P. J. and Troyk, P. (2000) Project summary: applied research on remotely queried embedded microsensors, Smart Structures and Materials 2000: Smart Electronics and MEMS, Proceedings of SPIE 3990. '
433. Brotherton, T. and Johnson, T. (2001) Anomaly detection for advanced military aircraft using neural networks, Proc. IEEE Aerospace Conference.
434. Wang, C. S. and Chang, F.-K. (2000) Diagnosis of impact damage in composite structures with built in piezoelectrics network, Smart Structures and Materials 2000: Smart Electronics and MEMS, Proceedings of SPIE 3990.
435. Barai, S. V. and Pandey, P. C. (1997) Time-delay neural networks in damage detection of railway bridges, Advances in Engineering Software 28, 1-10, Elsevier Science Limited.
436. Kim, S.-H. and Yoon, C. (2000) Structural monitoring system based on sensitivity analysis and a neural network, Computer-Aided Civil and Infrastructure Engineering 15, 309-318, Blackwell Publishers, Malden., MA.
437. Loh, C.-H. and Yeh, S.-C. (2000) Application of neural networks to health monitoring of bridge structures, Nondestructive Evaluation of Highways, Utilities and Pipelines IV., Aktan., E. and Gosselin., S. R. (eds.), Proceedings of SPIE 3995.
438. Yun, C.-B. and Bahng, E. Y. (2000) Substructural identification using neural networks, Computers and Structures 77, 410-452, Elsevier Science.
439. Nagel, D. J. (2002) Microsensor clusters., Microelectronics journal 33, 107-119 Elsevier Science.
440. Chowdhury, S., Ahmadi, M. and Miller, W. C. (2002) Design of a MEMS acoustical beamforming sensor microarray, IEEE Sensors Journal 2(6), 617-627.
441. Ruffin, P. B. (2002) MEMS based sensor arrays for military applications, Smart Electronics, MEMS and Nanotechnology, Proc. SPIE 4700.
442. Manobianco, J., Evans, R. J., Pister, K. S. J. and Manobianco, D. M. (2004) GEMS: A Revolutionary System for Environmental Monitoring, Proc. Nanotech 04, NSTI, pp. 422-425.
443. Martinez, K. G. Presentation to Nextwave Technologies, available at http: //www. nextwave-interface. org/docs/pdfs/e-031030-22. pdf.
444. Mainwaring, A., Polastre, J., Szewczyk, R., Culler, D. and Anderson, J. (2002) Wireless Sensor Networks for Habitat Monitoring, WSNA, Atlanta, USA.
445. Römer, K. and Mattern, F. (2004) The design space of wireless sensor networks, IEEE Wireless Communications 11(6), 54-61.
446. Staszewski, W. J., Worden, K., Wardle, R. and Tomlinson, G. R. (2000) Fail-safe sensor distributions for impact detection in composite materials, Smart Material Structures, IOP Publishing, 9, 298-303.
447. Mitchell, K., Sana, S., Liu, P., Cingirikonda, K., Rao, S. and Pottinger, H. J. (2000) Distributed computing and sensing for structural health monitoring systems, Smart Structures and Materials 2000: Smart Electronics and MEMS., Varadan, V. K. (ed.), Proc. SPIE 3990.
448. Coulouris, G. F., Dollimore, J. and Kindberg, R. (2001) Distributed Systems: Concepts and Design, 3rd edition, Pearson Press.
449. Pike, R., Presotto, D., Dorward, S., Flandrena, B., Thompson, K., Trickey, H. and Winterbottom, P. (2002) Plan 9 From Bell Labs, http: //plan9. bell-labs. com /sys /doc/9. pdf.
450. Kasetkasem, T. and Varshney, P. K. (2001) Communication structure planning for multisensor detection systems, Proceedings of the IEE Conference on Radar, Sonar and Navigation 148, 2-8.
451. Zou, Y. and Chakrabarty, K. (2004) Uncertainty-aware and coverage-oriented deployment for sensor networks, Journal of Parallel and Distributed Computing 64(7), 788-798.
452. McGlynn, M. J. and Borbash, S. A. (2001) Birthday protocols for low energy deployment and flexible neighbor discovery In ad hoc wireless networks, MobiHOC'Ol, Long Beach, CA, USA.
453. Inane, M., Magdon-Ismail, M. and Yener, B. (2003) Power Optimal Connectivity and Coverage in Wireless Sensor Networks, RPI Computer Science Technical Report, TR # 03-06.
454. Cerpa, A. and Estrin, D. (2002) ASCENT: adaptive self-configuring sensor networks topologies, INFOCOM 2002. 21st Annual Joint Conference of the IEEE Computer and Communications Societies, Proceedings 3.
455. Chen, B., Jamieson, K., Balakrishnan, H. and Morris, R. (2002) Span: an energy-efficient coordination algorithm for topology maintenance In ad hoc wireless networks, ACM Wireless Networks Journal 8(5).
456. Details of TinyOS available at http: //www. tinyos. net/.
457. http: //www. tinyos. net/special/mission.
458. Hofmeijer, T., Dulman, S., Jansen, P. G. and Havinga, P. J. M. (2004) DCOS, a real-time light-weight data centric operating system, In Sahni, S. (ed.), IASTED Int. Conf. on Advances in Computer Science and Technology (ACST), St. Thomas, Virgin Islands, USA, ACTA Press, Calgary, Canada, pp. 259-264.
459. Red Hat, Inc., Garnett, N., Larmour, J., Lunn, A., Thomas, G. and Veer, B. eCOS Reference Manual, http: //ecos. sourceware. Org/docs-2. 0/.
460. Srisathapornphat, C., Jaikaeo, C. and Shen, C.-C. (2000) Sensor information networking architecture, International Workshops on Parallel Processing, pp. 23-30.
461. Peti, P., Obermaisser, R., Eimenreich, W. and Losert, T. (2003) An architecture supporting monitoring and configuration in real-time smart transducer networks, Proc. IEEE International Conference on Computational Cybernetics.
462. Mailler, R., Vincent, R., Leser, V., Shen, J. and Middlekoop, T. (2001) Soft real-time, co-operative negotiation for distributed resource allocation, Proc. 2001 AAAI Fall Symposium on Negotiation.
463. Ortiz, C. L., Rauenbach, T. W., Hsu, E. and Vincent, R., Dynamic resource bounded negotiation in non-additive domains, pp. 61-107.
464. Soh, L.-K., Tsatsoulis, C. and Sevay, H., A satisficing, negotiated, and learning coalition formation architecture, pp. 110-138.
465. Mailler, R., Horling, B., Lesser, V. and Regis, V. (2004) The control, coordination, and organizational design of a distributed sensor network, IEEE Transactions on Systems, Man, and Cybernetics: Part A.
466. Lesser, V., Ortitz, C. L. and Tambe, M. (2003) Distributed sensor networks: introduction to a multiagent perspective, In Lesser, Orlitz and Tambe (eds.), Distributed SensorNetworks: A Multiagent Perspective., Kluwer Academic Publishers, Norwell, MA, ISBN 1-4020-7499-9, pp. 1-8.
467. Yao, Y. and Gehrke, J. (2002) The cougar approach to in-network query processing in sensor networks, SIGMOD Record, 31(1).
468. Sadagopan, N., Krishnamachari, B. and Helmy, A. (2003) The ACQUIRE mechanism for efficient querying in sensor networks, IEEE International Workshop on Sensor Network Protocols and Applications (SNPA'OS), held in conjunction with the IEEE International Conference on Communications (ICC 2003), Anchorage, Alaska.
469. http: //www. beagle2. com/index. htm.
470. NASA Jet Propulsion Laboratory, Maers Exploration Rover Mission, http: //marsrovers. jpl. nasa. gov/home/.
471. Williams, D. R. Mars/Earth Comparison, http: //www-kl2. atmos. washington. edu/kl2/resources/mars_data-information/mars_earth_comp_ NSSDC_and. html.
472. Spectrolab Inc. press release, http: //www. spectrolab. com/com/news/news-detail. asp?id=152, July 25, 2003.
473. Maxim Inc., application note, HFAN-4. 0. 3, December 2000.
474. Johnson, N. M., Nurmikko, A. V. and DenBaars, S. P. (2000) Blue Diode Lasers, Physics Today.
475. Measurement Specialities Inc., Piezo Film Sensors Technical Manual, www. msiusa. com.
476. Crocombe, R. MEMS technology moves process spectroscopy into a new dimension, Spectroscopy, Europe.
477. Moreland, J., Jander, A., Beall, J. A., Pavel, K. and Russek, S. E. (2001) Micromechanical torque magnetometer for in situ thin film measurements, IEEE Transactions on Magnetics 37(4).
478. US Patent 5, 998, 995 Microelectromechanical (MEMS)-Based Magnetostric-tive Magnetometer.
479. ARM INC., product data, http: //www. arm. com/products/CPUs/ARM7TDMIS. html.
480. Hitachi Ltd., product announcement, http: //www. electronicstalk. com/news/hit/hitl27. html.
481. TSMC Inc., product announcement, http: //www. tsmc. com/chinese/technology/tOlOl. htm.