LED Packaging for Lighting Applications: Design, Manufacturing and Testing

LED Packaging for Lighting Applications: Design, Manufacturing and Testing

Volumn , Issue , 2011, Pages

  Liu, Sheng ^a   Luo, Xiaobing ^a  

^a HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84890082030     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470827857     Document Type: Book

References (365)

1. Slingo, W. and Brooker, A. (1900), Electrical Engineering for Electric Light Artisans, London, Longmans, Green and Co.
2. Zhang, W. and Liang, C. (1997), "Progress in visible LED," Semiconductor Information, 43(3):1-9.
3. Akira Fujimoto, Hideaki Watanabe, Masashi Takeuchi and Mikihiko Shimura, (1985) "LPE growth of latticematched InGaAsP on GaAs0.69P0.31 substrates and low thresholdcurrent density operation of visible InGaAsP DH lasers", Japanese Journal of Applied Physics 24: L653-L656.
4. Nishizawa, J., Itoh, K. and Okuno, Y. (1985), "LPE-AlGaAs and red LED," Journal of Applied Physics 57:2210-2214.
5. Kuo, C., Fletcher, R. and Osentowaki, T. (1990), "High performance AlGaInP visible light-emitting diodes," Applied Physics Letters 57:2937-2939.
6. Sugawara, H., Ishikawa, M. and Hatakoshi, G. (1991), "High-efficiency InGaAlP/GaAs visible light-emitting diodes," Applied Physics Letters 58:1010-1013.
7. Sugawara, H., Itaya, K. and Hatakoshi, G. (1994), "Emission properties of InGaAlP visible light-emitting diodes employing a multi quantum-well active layer," Japan Journal of Applied Physics 33:5784.
8. Yokoyama, H., Nishi, K. and Anan, T. (1990), "Enhanced spontaneous emission from GaAs quantum wells in monolithic micro cavities," Applied Physics Letters 57(26):2814-2816.
9. Hunt, N.E., Schubert, E.F. and Logan, R.A. (1992), "Enhanced spectral power density and reduced line width at 1.3 mmin an InGaAsP quantumwell resonant cavity light-emitting diode," Applied Physics Letters 61:2287-2289.
10. Schubert, E., Wang, Y. and Cho, A. (1992), "Resonant cavity light-emitting diode," Applied Physics Letters 60(8):921-923.
11. Schubert, E., Hunt, N. and Micovic, M. (1994), "Highly efficient light emitting diodes with micro cavities," Science 265:943-945.
12. Blondelle, J., De Neve, H. and Borghs, G. (1996), "High efficiency (>20%) microcavity LEDs," IEE Colloquium on Semiconductor Optical Micro cavity Devices and Photonic Band-gaps 5:12/1-12/6.
13. Nakamura, S., Mukai, T. and Senoh, M. (1994), "Candela-class high-brightness InGaN/AlGaN double-heterostructure blue-light emitting diodes," Applied Physics Letters 64(13):1687-1689.
14. Nakamura, S., Mukai, T. and Senoh, M. (1994), "High-brightness InGaN/AlGaN double-heterostructure bluegreen light emitting diodes," Journal of Applied Physics 76:8189-8191.
15. Nakamura, S., Senoh, M. and Iwasa, N. (1995), "High-brightness InGaN blue, green and yellow light-emitting diodes," Japan Journal of Applied Physics 34:797-799.
16. Nakamura, S., Senoh, M. and Iwasa, N. (1995), "High-Power InGaN single-quantum-well- structure blue and violet light-emitting diodes," Applied Physics Letters 67:1868-1870.
17. Nakamura, S., Senoh, M. and Iwasa, N. (1995), "Superbright green InGaN single-quantum- well-structure lightemitting diodes," Japan Journal of Applied Physics 34:1332-1335.
18. Sheats, J.R., Antoniadis, H., Hueschen, M., Leonard, W., Miller, J. and Moon, R. (1996), "Organic electroluminescent devices," Science 273:5277.
19. Maruska, H. P. and Tietjen, J. J. (1969), "The preparation and properties of vapor-deposited single-crystal-line GaN," Applied Physics Letters 15:327-329.
20. Nakayama, N., Itoh, S., Ohata, T., Nakano, K., Okuyama, H., Ozawa, M., Ishibashi, A., Ikeda, M., and Mori, Y. (1993), "Room temperature continuous operation of blue-green laser diodes," Electronic Letters 29:1488-1489.
21. Eason, D.B., Yu, Z., Hughes, W.C. (1995), "High Efficiency ZnCdSe/ZnSSe/ZnMgSSe Green Light Emitting Diodes," Applied Physics Letters 66:115-118.
22. Morkoc, H., Strite, S., Gao, G. B., Lin, M. E., Sverdlov, B., and Burns, M. (1994), "II-VI ZnSe-based semiconductor device technologies," Journal of Applied Physics, 76:1363-1398.
23. http://www.ecse.rpi.edu/~schubert/Course-ECSE-6290%20SDM-2/1%20P-N%20junction%20summary.pdf (2009/9/1)
24. Xi, Y. and Schuberta, E. F. (2004), "Junction-temperature measurement in GaN ultraviolet light-emitting diodes using diode forward voltage method," Applied Physics Letters, 85:2163-2165.
25. http://en.wikipedia.org/wiki/CIE_1931_color_space (2009/9/1)
26. Nakamura, S., Makui, T. and Senoh, M. (1992), "In situ monitoring and Hall measurements of GaN grown with GaN buffer layers," Journal of Applied Physics 71:5543-5549.
27. Kordos, P., Javorka, P., Morvic, M., Betko, J., Van, J.M.,Wowchak, A.M., and Chow, P.P. (2000), "Conductivity and Hall-effect in highly resistive GaN layers," Applied Physics Letters 76:3762-3765.
28. Kuznetsov, N.I., Nikolaev, A.E., Zubrilov, A.S., Melnik, Y.V. and Dimitriev, V.A. (1999), "Vapor phase epitaxy on SiC substrates," Applied Physics Letters 75:3138-3141.
29. Perlin, P., Suski, T. and Teisseyre, H. (1995), "Towards the Identification of the Dominant Donor in GaN," Physics Review Letters 75:296-310.
30. Pankove, J.I. and Berkeyheiser, J.E. (1974), "Properties of Zinc-doped GaN. II. photoconductivity," Journal of Applied Physics 45:3892-3896.
31. Kaufmann, U., Kunzer, M., Kaier, M., Obloh, H., Ramakrishnan, A., Santic, B. and Schlotter, P. (1998), "Nature of the 2.8 eV photoluminescence band in Mg doped GaN," Applied Physics Letters 72(11):1326-1329.
32. Tokunaga, H.,Waki, I.,Yamaguchi, A., Akutsu, N. and Matsumoto, K. (1998), "Growth condition dependence of Mg-doped GaN film grown by horizontal atmospheric MOCVD system with three layered laminar flow gas injection" Journal of Crystal Growth, 189/190:519-522.
33. Amano, H., Kito, M., Hiramatsu, K. and Akasaki, I. (1989), "Light Genererating Carrier Recombination and Impurities in Wurtzite GaN/Al2O3 Grown by MOCVD," Japan Journal of Applied Physics 28:2112-2116.
34. Nakamura, S., Iwasa, N., Senoh, M. and Mukai, T. (1992), "Thermal annealing effects on p-type Mg-doped GaN films," Japan Journal of Applied Physics 31:139-142.
35. Littlejohn, M.A., Hauser, J.R. and Glisson, T.H. (1975), "Monte-Carlo calculation of velocity-field relationship for gallium nitride," Applied Physics Letters 26:625-628.
36. Nakamura, S., Makui, T. and Senoh, M. (1992), "In situ monitoring and Hall measurements of GaN grown with GaN buffer layers," Journal of Applied Physics 71:5543-5547.
37. Maruska, H.P. and Tietjen, J.J. (1969), "The preparation and properties of vapor-deposited single-crystal-line GaN," Applied Physics Letters 15:327-331.
38. Monemar, B. (1974), "Fundamental energy gap of GaN from photoluminescence excitation spectra," Physical Review B 10:676-681.
39. Piehugin, I.G. and Yaskov, D.A. (1970), "Preparation of gallium nitride," Inorganic Materials 6:1732-1738.
40. Pankove, J.I., Berkeyheiser, J.E. and Maruska, H.P. (1970), "Luminescent properties of GaN," Solid State Communications 8:1051-1056.
41. Nakamura, S., Mukai, T. and Seno, M. (1992), "Si- and Ge doped GaN films grown with GaN buffers layers," Japan Journal of Applied Physics 31:2883-2887.
42. Li, S.T., Mo, C.L. andWang, L. (2001), "The influence of Si-doping to the growth rate and yellow luminescence of GaN grown by MOCVD," Journal of Luminescence 93:321-326.
43. Ogino, T. and Aoki, M. (1980), "Mechanism of yellow luminescence in GaN," Japan Journal of Applied Physics 19:2395-2399.
44. Hofmann, D.M., Kovalev, D. and Steude, G. (1995), "Properties of the yellow luminescence in undoped GaN epitaxial layers," Physical Review B 52:16702.
45. Kennedy, T.A., Glaser, E.R. and Freitas, J.A. (1995), "Native defects and dopants in GaN studied through photoluminescence and optically detected magnetic resonance," Journal of Electronic Materials 24:219-224.
46. Glaser, E.R., Kennedy, T.A. and Doverspike, K. (1995), "Optically detected magnetic resonance of GaN films grown by organo metallic chemical-vapor deposition," Physical Review B 51:13326.
47. Neugebauer, J. and van deWalle, C. (1996), "Gallium vacancies and the yellow luminescence in GaN," Applied Physics Letters 69:503-506.
48. Mattila, T. and Nieminen, R.M. (1997), "Point-defect complexes and broad-band luminescence in GaN and AlN," Physical Review B 55:9571.
49. Sasaki, T. and Zembutsu, S. (1987), "Substrate-orientation dependence of GaN single-crystal films grown by metal organic vapor-phase epitaxy," Journal of Applied Physics 61:2533-2537.
50. Tsubouchi, K., Sugai, K. and Mikoshiba, N. (1981), New York, IEEE Ultrasonics Symposium Proc., 1:375-379.
51. McNeil, L.E., Grimsditch, M. and French, R.H. (1993), "Vibrational spectroscopy of aluminum nitride," Journal of the American Ceramic Society 76:1132-1136.
52. Ruiz, E., Alvarez, S. and Alemany, P. (1994), "Electronic structure and properties of AlN," Physical Review B 49:7115-7123.
53. Kim, K., Lambrecht, R.L. and Segall, B. (1996), "Elastic constants and related properties of tetrahedrally bonded BN, AlN, GaN, and InN," Physical Review B 53:16310.
54. Wright, A.F. (1997), "Elastic properties of zinc-blende and wurtzite AlN, GaN, and InN," Journal of Applied Physics 82 (6):2833-2839.
55. Sheleg, A.U. and Savastenko, V.A. (1979), "Determination of elastic constants of hexagonal crystals from measured values of dynamic atomic displacements," Izv. Akad. Nauk SSSR. Neorganicheskie Materials 15:1598-1602.
56. Polian, A., Grimsditch, M. and Grzegory, I. (1996), "Elastic constants of gallium nitride," Journal of Applied Physics 79:3343-3344.
57. Azuhata, T., Sota, T. and Suzuki, K. (1996), "Elastic constants of III-V compound semiconductors: modification of Keyes'relation," Journal of Physics: Condensed Matter 8:3111.
58. Kim, K., Lambrecht, R.L. and Segall, B. (1994), "Electronic structure of GaN with strain and phonon distortions," Physical Review B 50:1502-1505.
59. Wang, K. and Reeber, R.R. (2001), "Thermal expansion and elastic properties of InN," Applied Physics Letters 79:1602-1604.
60. Nipko, J.C., Loong, C.K., Balkas, C.M. and Davis, R.F. (1998) "Phonon density of states of bulk gallium nitride," Applied Physics Letters 73:34-36.
61. Barin, I., Knacke, O. and Kubaschewski, O. (1977), "Thermochemical properties of inorganic substances," Springer-Verlag, Berlin-Heidelberg-New York.
62. Florescu, D. I., Asnin, V. M., Pollak, F. H., Molnar, R. J. and Wood, C. E. C. (2000), "High spatial resolution thermal conductivity and Raman spectroscopy investigation of hydride vapor phase epitaxy grown n-GaN/ sapphire (0001): Doping dependence," Journal of Applied Physics 88:3295-300.
63. Kotchetkov, D., Zou, J., Balandin, A.A., Florescu, D.I. and Pollak, F.H. (2001), "Effect of dislocations on thermal conductivity of GaN layers," Applied Physics Letters 79:4316-4318.
64. Harima, H. (2002) "Properties of GaN and related compounds studied by means of Raman scattering," Journal of Physics: Condensed Matter 14: R967-R993.
65. Davydov, V. Y., Emtsev, V. V., Goncharuk, I. N., Smirnov, A. N., Petrikov, V. D., Mamutin, V.V., Vekshin, V. A., Ivanov, S. V., Smirnov, M. B. and Inushina, T. (1999), "Experimental and theoretical studies of phonons in hexagonal InN," Applied Physics Letters 75:3297-3299.
66. Krukowski, S., Witek, A., Adamczyk, J., Jun, J., Bockowski, M., Grzegory, I., Lucznik, B., Nowak, G., Wroblewski, M., Presz, A., Gierlotka, S., Stelmach, S., Palosz, B., Porowski, S. and Zinn, P. (1998), "Thermal properties of indium nitride," Journal of Physics and Chemistry of Solids 59:289-295.
67. Sheleg, A. U. and Savastenko, V. A. (1979), "Determination of elastic constants of hexagonal crystals from measured values of dynamic atomic displacements," Izv. Akad. Nauk SSSR. Neorg. Mater. 15:1598-1602.
68. Wang, K. and Reeber, R.R. (2001), "Thermal expansion and elastic properties of InN," Applied Physics Letters 79:1602-1604.
69. Pankove, J. I. and Schade, H. (1974), "Photoemission from GaN," Applied Physics Letters 25:3-55.
70. Koshchenko, V. I., Grinberg, Y. K. and Demidenko, A. F. (1984), "Thermodynamic properties of AlN (5-2700 K), GaP (5-1500 K), and BP (5-800 K)," Inorganic Materials, 20:111787-90.
71. Kim, J. G., Frenkel, A.C., Liu, T. and Park, R. M. (1994), "Growth by molecular beam epitaxy and electrical characterization of Si-doped zinc blende GaN films deposited on beta -SiC coated (001) Si substrates," Applied Physics Letters 65:91-93.
72. Slack, G. A., Tanzilli, R.A., Pohl, R.O. and Vandersande, J.W. (1987), "The intrinsic thermal conductivity of AlN," Journal of Physics and Chemistry of Solids, 48:641-647.
73. Kirchner,V., Heinke, H. and,Hommel, D. (2000), "Thermal expansion of bulk and homoepitaxial GaN," Applied Physics Letters 77(10):1434-1436.
74. Leszczynski, M., Suski, T. and Teisseyre, H. (1994), "Thermal expansion of gallium nitride," Journal of Applied Physics 76(8):4909-4911.
75. Tummala, R.R. and Swaminathan, M. (2008), Introduction to System-on-Package (SOP), McGraw-Hill.
76. Suhir, E., Lee, Y.C., Wong, C.P. (2007), Physical Design-Reliability and Packaging, Springer.
77. ITRS (2006), International Technology Roadmap for Semiconductors, USA.
78. Kim, H., Park, S.J. and Hwang, H. (2007), "Lateral current transport path, a model for GaN-based light-emitting diodes: applications to practical devices designs," Applied Physics Letters 81(7):1326-1328.
79. Pan, H.P., Huang, L.W. and Li, R. (2007), "Finite element model of GaN based LED and the optimization of the mesa structure," Chinese Journal of Luminescence 28(1):114-118. (In Chinese)
80. Bulashevich, K.A., Mymrin,V.F., Karpov, S.Y., Zhmakin, I.A., Zhmakin, A.I. (2006), "Simulation of visible and ultra-violet group- nitride light emitting diodes," Journal of Computational Physics 213:214-238.
81. Lastras, A. (1978), "Internal quantum efficiency measurement for GaAs light-emitting diodes," Journal of Applied Physics 49(6):3565-3570.
82. Hangleiter, A., Fuhrmann, D., Grewe, M., Hitzel, F., Klewer, G., Lahmann, S., Netzel, C., Riedel, N. and Rossow, U. (2004), "Towards understanding the emission efficiency of nitride quantum wells," Physica Status Solidi (a) 201(12):2808-2813.
83. Jackson, M., Boroditsky, M. and Yablonovitch, E. (1997), "Measurement of internal quantum efficiency and surface recombination velocity in InGaN structures," 10th Lasers and Electro-Optics Society Annual Meeting, San Francisco, CA, USA, IEEE, 378-379.
84. Boroditsky, M., Gontijo, I., Jackson, M., Vrijen, R., Yablonovitch, E., Krauss, T., Cheng, C. C., Scherer, A. and Krames, M. (2000), "Surface recombination measurements on III-V candidate materials for nanostructure lightemitting diodes," Journal of Applied Physics 87(7):3497-3504.
85. Laubsch, A., Sabathil, M., Bruederl, G.,Wagner, J., Strassburg, M., Baur, E., Braun, H., Schwarz, U. T., Lell, A., Lutgen, S., Linder, N., Oberschmid, R. and Hahn, B. (2007), "Measurement of the Internal Quantum Efficiency of InGaN Quantum Wells," Proceedings of SPIE, San Joes, CA, USA, SPIE, 6486,64860J.
86. Martinez, C.E., Stanton, N.M., Kent, A.J., Graham, D.M., Dawson, P., Kappers, M.J. and Humphreys, C.J. (2005), "Determination of relative internal quantum efficiency in InGaN/GaN quantum wells," Journal of Applied Physics 98(5):053509.
87. Zang, K.Y., Chua, S.J., Teng, J.H., Ang, N.S.S.,Yong, A.M. and Chow, S.Y. (2008), "Nanoepitaxy to improve the efficiency of InGaN light-emitting diodes," Applied Physics Letters 92(24):243126.
88. Wuu, D.S.,Wang,W.K.,Wen, K.S., Huang, S.C., Lin, S.H., Huang, S.Y. and Lin, C.F. (2006), "Defect reduction and efficiency improvement of near-ultraviolet emitters via laterally overgrown GaN on a GaN/patterned sapphire template," Applied Physics Letters 89(16):161105.
89. Wu, G.M., Chung, T. J., Nee, T.E., Kuo, D.C., Chen, W.J., Ke, C.C., Hung, C.W., Wang, J.C. and Chen, N.C. (2007), "Improvements of quantum efficiency and thermal stability by using Si delta doping in blue InGaN/GaN multiple quantum well light-emitting diodes," Physica Status Solidi (c) 4(7):2797-2801.
90. Xie, J.Q., Ni, X.F., Fan, Q., Shimada, R., O€zg€ur, U€. and Morko̧c, H. (2008), "On the efficiency droop in InGaN multiple quantum well blue light emitting diodes and its reduction with p-doped quantum well barriers," Applied Physics Letters 93(12):121107.
91. Sugawara, H., Itaya, K. and Hatakoshi, G. (1993), "Characteristics of a distributed Bragg reflector for the visiblelight spectral region using InGaAlP and GaAs: comparison of transparent- and loss-type structures," Journal of Applied Physics 74(5):3189-3193.
92. Kato, T., Susawa, H., Hirotani, M., Saka, T., Ohashi,Y., Shichi, E. and Shibata, S. (1991), "GaAs/GaAlAs surface emitting IR LED with Bragg reflector grown by MOCVD," Journal of Crystal Growth 107(1-4):832-835.
93. Sugawara, H. and ltaya, K. (1992), "High-brightness lnGaAlP green light-emitting diodes," Applied Physics Letters 61(15):1775-1777.
94. Chen, C.H., Chang, S.J., Su, Y.K., Chi, G.C., Sheu, J.K. and Chen, J.F. (2002), "High-efficiency InGaN/GaN MQWgreen light-emitting diodes withCARTandDBRstructures," IEEE Journal of Selected Topics in Quantum Electronics 8(2):284-288.
95. Nakada, N., Nakaji, M., Ishikawa, H., Egawa, T., Umeno, M. and Jimbo, T. (2000), "Improved characteristics of InGaN multiple-quantum-well light-emitting diode by GaN/AlGaN distributed Bragg reflector grown on sapphire," Applied Physics Letters 76(14):1804-1806.
96. Schubert, E.F.,Wang,Y.H., Cho, A.Y., Tu, L.W. and Zydzik, G. J. (1992), "Resonant cavity light-emitting diode," Applied Physics Letters 60(8):921-923.
97. Dill, C., Stanley, R.P., Oesterle, U. (1998), "Effect of detuning on the angular emission pattern of high-efficiency microcavity light-emitting diodes," Applied Physics Letters 73(26):3812-3814.
98. Neve, D.H., Blondelle, J., Van Daele, P., Demeester, P., Borghs, G. and Baets, R. (1997), "Recycling of guided mode light emission in planar microcavity light emitting diodes," Applied Physics Letters 70(7):799-801.
99. Benisty, H., De Neve, H.,Weisbuch, C. (1998), "Impact of planar microcavity effects on light extraction-part I: basic concepts and analytical trends," IEEE Journal of Quantum Electronics 34(9):1612-1631.
100. Benisty, H., De Neve, H.,Weisbuch, C. (1998), "Impact of planar microcavity effects on light extraction-part II: selected exact simulations and role of photon recycling," IEEE Journal of Quantum Electronics 34(9):1632-1643.
101. Schmid, W., Eberhard, F., Jager, R., King, R., Miller, M., Joos, J. and Ebeling, K.J. (2000), "45% quantum efficiency light emitting diodes with radial outcoupling taper." Proceedings of SPIE, San Joes, CA, USA, SPIE, 3938,90.
102. Lee, S.J. and Song, S.W. (1999), "Efficiency improvement in light emitting diodes based on geometrically deformed chips," Proceedings of SPIE, San Joes, CA, USA, SPIE, 3621,237.
103. Krames, M.R., Ochiai-Holcomb, M., Carter-Coman, C. and Chen, E.I. (1999), "High-power truncated-invertedpyramid (AlxGa1-x) 0.5In0.5P/GaP light-emitting diodes exhibiting >50% external quantum efficiency," Applied Physics Letters 75(16):2365-2367.
104. Kao, C.C., Kuo, H.C., Huang, H.W., Chu, J.T., Peng, Y.C., Hsieh, Y.L., Luo, C.Y.,Wang, S.C., Yu, C.C. and Lin, C.F. (2005), "Light-output enhancement in a nitride-based light-emitting diode with 22~ undercut sidewalls," IEEE Photonics Technology Letters 17(1):19-21.
105. Chang, C.S., Chang, S.J. and Su, Y.K. (2004), "Nitride-based LEDs with textured side walls," IEEE Photonics Technology Letters 16(3):750-752.
106. Yao, Y., Jin, C.X., Dong, Z.J., Sun, Z. and Huang, S.M. (2007), "Improvement of GaN-based light-emitting diodes using surface-textured indium-tin-oxide transparent ohmic contacts," Chinese Journal of Liquid Crystals and Displays 22(3):273-277. (In Chinese)
107. Lee, Y.J., Kuo, H.C., Lu, T.C. and Wang, S.C. (2006), "High light-extraction GaN-based vertical LEDs with double diffuse surfaces," IEEE Journal of Quantum Electronics 42(12):1196-1201.
108. Horng, R.H., Zheng, X.H., Hsieh, C.Y. and Wuu, D.S. (2008), "Light extraction enhancement of InGaN lightemitting diode by roughening both undoped micropillar-structure GaN and P-GaN as well as employing an omnidirectional reflector," Applied Physics Letters 93(2):021125-021125.
109. Lee, Y.J., Hwang, J.M., Hsu, T.C., Hsieh, M.H., Jou, M.J., Lee, B.J., Lu, T.C., Kuo, H.C. andWang, S.C. (2006), "Enhancing the output power of GaN-based LEDs grown on wet-etched patterned sapphire substrates," Photonics Technology Letters 18(10):1152-1154.
110. Wuu, D.S.,Wang,W.K., Shih,W.C., Horng, R.H., Lee, C.E., Lin,W.Y. and Fang, J.S. (2005), "Enhanced output power of near-ultraviolet InGaN-GaN LEDs grown on patterned sapphire substrates," Photonics Technology Letters 17(2):288-290.
111. Wang, C.C., Ku, H., Liu, C.C., Chong, K.K., Hung, C.I.,Wang, Y.H. and Houng, M.P. (2007), "Enhancement of the light output performance for GaN-based light-emitting diodes by bottom pillar structure," Applied Physics Letters 91(12):121109-121109.
112. Fan, S.,Villeneuve, P.R., Joannopoulos, J.D. and Schubert, E.F. (1997), "Photonic crystal light-emitting diodes," Proceedings of SPIE: 67-73.
113. Kim, D.H., Cho, C.O., Roh,Y.G., Jeon, H., Park,Y.S., Cho, J., Im, J.S., Sone, C., Park,Y., Choi,W.J. and Park, Q. H. (2005), "Enhanced light extraction from GaN-based light-emitting diodes with holographically generated two-dimensional photonic crystal patterns," Applied Physics Letters 87(20):203508-203508.
114. Truong, T.A., Campos, L.M., Matioli, E., Meinel, I., Hawker, C.J.,Weisbuch, C. and Petroff, P.M. (2009), "Light extraction from GaN-based light emitting diode structures with a noninvasive two-dimensional photonic crystal patterns," Applied Physics Letter 94(2):023101-023101.
115. Kang, X.N., Zhang, B., Dai, T., Bao, K., Wei, W. and Zhang, G.Y. (2008), "Improvement of light extraction from GaN-based LED with surface photonic lattices," 5th China International Forum on Solid State Lighting.
116. Holonyak, J.N. and Bevacqua, S.F. (1962), "Coherent (visible) light emission from Ga(As1_xPx) junctions," Applied Physics Letters 1(4):82-83.
117. Dupuis, R.D. and Krames, M.R. (2008), "History, development, and applications of high-brightness visible lightemitting diodes," IEEE Journal of Lightwave Technology 26(9):1154-1171.
118. Lee, Y.J., Lu, T.C., Kuo, H.C. andWang, S.C. (2007), "High brightness GaN-based light-emitting diodes," IEEE Journal of Display Technology 3(2):118-125.
119. Nakamura, S., Mukai, T. and Senoh, M. (1991), "High-power GaN PN junction blue-light-emitting diodes," Japanese Journal of Applied Physics 30(12A): L1998-L2001.
120. Nakamura, S., Senoh, M. and Mukai, T. (1993), "High-power InGaN/GaN double-heterostructure violet light emitting diodes," Applied Physics Letters 62(19):2390-2392.
121. Nakamura, S., Pearton, S. and Fasol, G. (1997), The Blue Laser Diode: GaN Based Light Emitters and Lasers. Berlin, Springer.
122. Schlotter, P., Schmidt, R. and Schneider, J. (1997), "Luminescence conversion of blue light emitting diodes," Applied Physics A: Materials Science & Processing 64(4):417-418.
123. Evans, D.L. (1997), "High-luminance LEDs replace incandescent lamps in new applications," Light-Emitting Diodes: Research, Manufacturing, and Applications, San Jose, CA, USA, SPIE, 142-153.
124. Steranka, F.M., Bhat, J.C., Collins, D., Cook, L., Craford, M.G., Fletcher, R., Gardner, N., Grillot, P., Goetz,W., Keuper, M., Khare, R., Kim, A., Krames, M., Harbers, G., Ludowise, M., Martin, P.S., Misra, M., Mueller, G., Mueller-Mach, R., Rudaz, S., Shen, Y.C., Steigerwald, D., Stockman, S., Subramanya, S., Trottier T. andWierer J.J. (2002), "High power LEDs-technology status and market applications," Physica Status Solidi (a) 194(2):380-388.
125. Craford, M.G. (2005), "LEDs for solid state lighting and other emerging applications: status, trends, and challenges," Fifth International Conference on Solid State Lighting, San Diego, CA, USA, SPIE, 594101-10.
126. Lee, Y.J., Kuo, H.C., Lu, T.C.,Wang, S.C., Ng, K.W., Lau, K.M., Yang, Z.P., Chang, A.P. and Lin, S.Y. (2008), "Study of GaN-Based light-emitting diodes grown on chemical wet-etching-patterned sapphire substrate with V-shaped pits roughening surfaces," Journal of Lightwave Technology 26(11):1455-1463.
127. OIDA. (2002), "Light emitting diodes (LEDs) for general iIllumination, an OIDA technology roadmap update 2002," from http://lighting.sandia.gov/lightingdocs/OIDA_SSL_LED_Roadmap_Full.pdf.
128. LEDs Magazine (2008), "LEDchips set newR&Drecords," from http://www.ledsmagazine.com/features/5/10/5.
129. Haque, S., Steigerwald, D., Rudaz, S., Steward, B., Bhat, J., Collins, D.,Wall, F., Subramanya, S., Elpedes, C. and Elizondo, P. (2000), "Packaging challenges of high-power LEDs for solid state lighting," from www.lumileds. com/pdfs/techpaperspres/manuscript_IMAPS_2003.PDF
130. Hahn, B., Weimar, A., Peter, M. and Baur, J. (2008), "High-power InGaN LEDs: present status and future prospects," Light-Emitting Diodes: Research, Manufacturing, and Applications XII, San Jose, CA, USA, SPIE, 691004-8.
131. Braune, B., Brunner, H., Strauss, J. and Petersen, K. (2005), "Light conversion in opto semiconductor devices: from the development of luminous materials to products with customized colors," Optoelectronic Devices: Physics, Fabrication, and Application II, Boston, MA, USA, SPIE, 60130D-8.
132. Arik, M., Becker, C.A., Weaver, S.E. and Petroski, J. (2004), "Thermal management of LEDs: package to system," Third International Conference on Solid State Lighting, San Diego, CA, USA, SPIE, 64-75.
133. Carl, H.Z. (2004), "Newmaterial options for light-emitting diode packaging," Light-Emitting Diodes: Research, Manufacture, and Applications VIII, Bellingham, WA, SPIE, 173-182.
134. Zweben, C. (2008), "Advances in LED packaging and thermal management materials," Light-Emitting Diodes: Research, Manufacturing, and Applications XII, San Jose, CA, USA, SPIE, 691018-11.
135. LEDs Magazine (2008), "Lumileds recalls some Luxeons, halts production line," from http://ledsmagazine.com/ news/5/1/19
136. Hsu, Y.C., Lin, Y.K., Chen, M.H., Tsai, C.C., Kuang, J.H., Huang, S.B., Hu, H.L., Su, Y.I. and Cheng, W.H. (2008), "Failure mechanisms associated with lens shape of high-power LED modules in aging test," IEEE Transactions on Electron Devices 55(2):689-694.
137. Park, J.W., Yoon, Y.B., Shin, S.H. and Choi, S.H. (2006), "Joint structure in high brightness light emitting diode (HB LED) packages," Materials Science and Engineering: A 441(1-2):357-361.
138. Jayasinghe, L., Dong, T.M. and Narendran, N. (2007), "Is the thermal resistance coefficient of high-power LEDs constant?," Seventh International Conference on Solid State Lighting, San Diego, CA, USA, SPIE, 666911-6.
139. Meneghini, M., Trevisanello, L., Sanna, C., Mura, G., Vanzi, M., Meneghesso, G. and Zanoni, E. (2007), "High temperature electro-optical degradation of InGaN/GaN HBLEDs," Microelectronics Reliability 47(9-11):1625-1629.
140. Su, Y.K., Chen, K.C. and Lin, C.L. (2007), "Ultra high power light-emitting diodes with electroplating technology," 2007 IEEE Conference on Electron Devices and Solid-State Circuits. Tainan, Taiwan, IEEE, 19-22.
141. Trevisanello, L.R., Meneghini, M., Mura, G., Sanna, C., Buso, S., Spiazzi, G., Vanzi, M., Meneghesso, G. and Zanoni, E. (2007), "Thermal stability analysis of high brightness LED during high temperature and electrical aging," Seventh International Conference on Solid State Lighting, San Diego, CA, USA, SPIE, 666913-10.
142. Biber, C. (2008), "LED light emission as a function of thermal conditions," 2008 24th Annual IEEE Semiconductor Thermal Measurement and Management Symposium, 180-184.
143. Buso, S., Spiazzi, G., Meneghini, M. and Meneghesso, G. (2008), "Performance degradation of high-brightness light emitting diodes under DC and pulsed bias," IEEE Transactions on Device and Materials Reliability 8(2):312-322.
144. Nam, H. (2008), "Failure analysis matrix of light emitting diodes for general lighting applications," 15th International Symposium on the Physical and Failure Analysis of Integrated Circuits, 1-4.
145. Trevisanello, L., Meneghini, M., Mura, G., Vanzi, M., Pavesi, M., Meneghesso, G. and Zanoni, E. (2008), "Accelerated life test of high brightness light emitting diodes," IEEE Transactions on Device and Materials Reliability, 8(2):304-311.
146. Liu, S.,Wang, K., Liu, Z.Y., Chen, M.X. and Luo, X.B. (2008), "Roadmap for LED packaging development: A personal View," 5th China International Exhibition & Forum on Solid State Lighting, Shenzhen, China.
147. Li, Y., Moon, K.S. and Wong, C.P. (2005), "Microelectronics without lead," 10.1126/Science.1110168.
148. Liu, S., Chen, M.X., Luo, X.B. and Gan, Z.Y. (2006), Method to fabricate white light-emitting diode, China Patent Application, 200610029858.6.
149. Liu, S., Chen, S.Y., Luo, X.B. and Chen, M.X. (2006), Method to fabricate high brightness white light-emitting diode, China Patent Application, 200610029856.7.
150. Liu, S., Chen, M.X., Luo, X.B. and Gan, Z.Y. (2006), Light-emitting diode packaging structure and method, China Patent Application, 200610029859.0.
151. Liu, S., Chen, M.X., Luo, X.B. and Gan, Z.Y. (2006), Method to fabricate light-emitting diode by spin coating and lithography, China Patent Application, 200610029857.1.
152. Zukauskas, A., Shur, M. S. and Gaska, R. (2002), Introduction to Solid-State Lighting, Wiley-Interscience.
153. Schubert, E.F. (2006), Light-Emitting Diodes, New York, Cambridge University Press.
154. Zhang, Y.M. (2008), Applied Optics, Beijing, Publishing House of Electronics Industry. (In Chinese).
155. Regina, M., Gerd, O.M. and Michael, R.K. (2004), "Phosphors materials and combinations for illumination grade white pcLED," Third International Conference on Solid State Lighting, SPIE, 115.
156. Nishida, T., Ban, T. and Kobayashi, N. (2003), "High-color-rendering light sources consisting of a 350nm ultraviolet lighting-emitting diode and three-basal-colors phosphors," Applied Physics Letters, 82(22):3817-3819.
157. Guo, X.Y., Graff, J. and Schubert, E.F. (1999), "Photo recycling semiconductor light emitting diode," Electron Devices Meeting, IEEE, 600-603.
158. Nakamura, S., Pearton, S. and Fasol, G. (1997), The Blue Laser Diode: GaN Based Light Emitters and Lasers, Berlin, Germany, Springer.
159. Mueller-Mach, R., Mueller, G.O., Krames, M.R. and Trottier, T. (2002), "High-power phosphor-converted light-emitting diodes based on III-Nitrides," IEEE Journal of Selected Topics in Quantum Electronics 8(2):339-345.
160. Mueller-Mach, R., Mueller, G., Krames, M.R., Hoppe, H.A., Stadler, F., Schnick,W., Juestel, T. and Schmidt, P. (2005), "Highly efficient all-nitride phosphor-converted white light emitting diode," Physica Status Solidi(a) 202 (9):1727-1732.
161. Xie, R.J., Hirosaki, N., Sakuma, K. and Kimura, N. (2008), "White light-emitting diodes (LEDs) using (oxy) nitride phosphors," Journal of Physics D: Applied Physics 41(14):144013.
162. Zachau, M., Becker, D., Berben, D., Fiedler, T., Jermann, F. and Zwaschka, F. (2008), "Phosphors for solid state lighting," Light-Emitting Diodes: Research, Manufacturing, and Applications XII, San Jose, CA, USA, SPIE, 691010.
163. Ohno, Y. (2004), "Color rendering and luminous efficacy of white LED spectra," Fourth International Conference on Solid State Lighting, Denver, CO, USA, SPIE, 88-98.
164. Chou,H.Y.,Hsu,T.H. andYang,T.H. (2005), "Effectivemethod forimproving illuminatingproperties ofwhite-light LEDs," Light-Emitting Diodes: Research,Manufacturing, and Applications IX, San Jose, CA, USA, SPIE, 33-41.
165. Krames, M.R., Shchekin, O.B., Mueller-Mach, R., Mueller, G.O., Zhou, L., Harbers, G. and Craford, M.G. (2007), "Status and future of high-power light-emitting diodes for solid-state lighting," IEEE Journal of Display Technology 3(2):160-175.
166. Summers, C.J., Wagner, B.K. and Menkara, H. (2004), "Solid state lighting: diode phosphors," Third International Conference on Solid State Lighting, San Diego, CA, USA, SPIE, 123-132.
167. Hao, W., Hao, W., Xinmin, Z., Chongfeng, G., Jian Xu, A.J.X., Mingmei Wu, A.M.W. and Qiang Su, A.Q.S. (2005), "Three-band white light from InGaN-based blue LED chip precoated with Green/red phosphors," IEEE Photonics Technology Letters 17(6):1160-1162.
168. Braune, B., Brunner, H., Strauss, J. and Petersen, K. (2005), "Light conversion in opto semiconductor devices: from the development of luminous materials to products with customized colors," Optoelectronic Devices: Physics, Fabrication, and Application II, Boston, MA, USA, SPIE, 60130D-8.
169. Collins, W.D., Krames, M.R., Verhoeckx, G.J. and Leth, N.J.M. (2001), Using electrophoresis to produce a conformal coated phosphor-converted light emitting semiconductor, US Patent, Lumileds Light. 6 576 488.
170. Yum, J.H., Seo, S.Y., Lee, S. and Sung, Y.E. (2001), "Comparison of Y3Al5O12:Ce0.05 phosphor coating methods for white-light-emitting diode on gallium nitride," Solid State Lighting and Displays, San Diego, CA, USA, SPIE, 60-69.
171. Loh, B.P., JR, N.W.M., Andrews, P., Fu, Y.K., Laughner, M. and Letoquin, R. (2008), Method of uniform phosphor chip coating and LED package fabricated using method, US Patent, Cree, Inc. 2 008 007 901 7A1.
172. Braune, B., Petersen, K., Strauss, J., Kromotis, P. and Kaempf, M. (2007), "A new wafer level coating technique to reduce the color distribution of LEDs," Light-Emitting Diodes: Research, Manufacturing, and Applications XI, San Jose, CA, USA, SPIE, 64860X-11.
173. Liu, S. (2006), Method to fabricate white light-emitting diode, China Patent application, 200610029858.6.
174. Yamada, K., Imai,Y. and Ishii, K. (2003), "Optical simulation of light source devices composed of blue LEDs and YAG phosphor," Journal of Light and Visual Environment 27(2):70-74.
175. Zhu, Y., Narendran, N. and Gu, Y. (2006), "Investigation of the optical properties of YAG: Ce phosphor," Sixth International Conference on Solid State Lighting, San Diego, CA, USA, SPIE, 63370S.
176. Arik, M., Setlur, A., Weaver, S., Haitko, D. and Petroski, J. (2007), "Chip to system levels thermal needs and alternative thermal technologies for high brightness LEDs," Journal of Electronic Packaging 129(3):328-338.
177. Kim, J.K., Luo, H., Schubert, E.F., Cho, J., Sone, C. and Park,Y. (2005), "Strongly enhanced phosphor efficiency in GaInN white light-emitting diodes using remote phosphor configuration and diffuse reflector cup," Japanese Journal of Applied Physics 44: L649-L651.
178. Luo, H., Kim, J.K., Schubert, E.F., Cho, J., Sone, C. and Park, Y. (2005), "Analysis of high-power packages for phosphor-based white-light-emitting diodes," Applied Physics Letters 86(24):243505.
179. Luo, H., Kim, J. K., Xi, Y., Schubert, E.F., Cho, J., Sone, C. and Park, Y. (2006), "Analysis of high-power packages for white-light-emitting diode lamps with remote phosphor," Materials Research Socity 892: FF09- 07.1-FF09-07.6.
180. Fan, B.F., Wu, H., Zhao, Y., Xian, Y.L. and Wang, G. (2007), "Study of phosphor thermal-isolated packaging technologies for high-power white light-emitting diodes," IEEE Photonics Technology Letters 19(15):1121-1123.
181. OIDA. (2002), "Light emitting diodes (LEDs) for general iIllumination, an OIDA technology roadmap update 2002," from http://lighting.sandia.gov/lightingdocs/OIDA_SSL_LED_Roadmap_Full.pdf
182. Fujii, T., Gao, Y., Sharma, R., Hu, E.L., DenBaars, S.P. and Nakamura, S. (2004), "Increase in the extraction efficiency of GaN-based light-emitting diodes via surface roughening," Applied Physics Letters 84(6):855-857.
183. Huang, H.W., Kao, C.C., Chu, J.T.,Wang,W.C., Lu, T.C.,Kuo, H.C.,Wang, S.C., Yu, C.C. and Kuo, S.Y. (2007), "Investigation of InGaN/GaN light emitting diodes with nano-roughened surface by excimer laser etching method," Materials Science and Engineering B 136:182-186.
184. Gao, H.Y., Yan, F.W., Fan, Z.C., Li, J.M., Zeng, Y.P. andWang, G.H. (2008), "Improved light extraction of GaNbased LEDs with nano-roughened p-GaN surfaces," Chinese Physics Letters 25(9):3448-3450.
185. Mont, F.W., Kim, J.K., Schubert, M.F., Luo, H., Schubert, E.F. and Siegel, R.W. (2007), "High refractive index nanoparticle-loaded encapsulants for light-emitting diodes," Light-Emitting Diodes: Research, Manufacturing, and Applications XI, San Jose, CA, USA, SPIE, 64861C-8.
186. Narendran, N., Gu,Y., Freyssinier, J.P.,Yu, H. and Deng, L. (2004), "Solid-state lighting: failure analysis of white LEDs," Journal of Crystal Growth 268(3-4):449-456.
187. Norris, A.W., Bahadur, M. and Yoshitake, M. (2005), "Novel silicone materials for LED packaging," Fifth International Conference on Solid State Lighting, San Diego, CA, USA, SPIE, 594115-7.
188. Bahadur, M., Norris, A.W., Zarisfi, A., Alger, J.S. and Windiate, C. C. (2006), "Silicone materials for LED packaging," Sixth International Conference on Solid State Lighting, San Diego, CA, USA, SPIE, 63370F-7.
189. Lee, S. J. (2001), "Analysis of Light-Emitting Diodes by Monte Carlo Photon Simulation," Applied Optics 40(9):1427-1437.
190. West, R.S. (2002), "Side-emitting high-power LEDs and their application in illumination," Solid State Lighting II, Seattle, WA, USA, SPIE, 171-175.
191. Chang, J.G., Liao, C.L.D. and Hwang, C.C. (2006), "Enhancement of the optical performances for the LED backlight systems with a novel lens cap," Novel Optical Systems Design and Optimization IX, San Diego, CA, USA, SPIE, 62890X-1-6.
192. Chao, P.C.P., Liao, L.D. and Chiu, C.W. (2006), "Design of a novel LED lens cap and optimization of LED placement in a large area direct backlight for LCD-TVs," Photonics in Multimedia, Strasbourg, France, SPIE, 61960N-1-9.
193. Chi,W. and George, N. (2006), "Light-emitting diode illumination design with a condensing sphere," Journal of Optical Society of America A 23(9):2295-2298.
194. Liu, Z.Y., Liu, S., Wang, K. and Luo, X.B. (2008), "Optical analysis of color distribution in white LEDs with various packaging methods," IEEE Photonics Technology Letters 20(20):2027-2029.
195. Wang, D.M., Chen, S.H.,Wang, M. and Xiang, S., Hua (2006), "The design and fabrication of microlens andLED integrated packaging," 2006 7th International Conference on Electronic Packaging Technology, Shanghai, China, IEEE, 359803-1-3.
196. Braune, B., Bogner, G., Brunner, H., Kraeuter, G. and Hoehn, K. (2003), "New developments in LED lighting by novel phosphors," Light-Emitting Diodes: Research, Manufacturing, and Applications VII, San Jose, CA, USA, SPIE, 87-94.
197. Mesli, T. (2007), "Improvement of ultra-high-brightness white LEDs," Manufacturing LEDs for Lighting and Displays, Berlin, Germany, SPIE, 67970N-1-9.
198. Allen, S.C. and Steckl, A.J. (2007), "ELiXIR-solid-state luminaire with enhanced light extraction by internal reflection," Journal of Display Technology 3(2):155-159.
199. Lee, S.J. (2001), "Light-emitting diode lamp design by Monte Carlo photon simulation," Light-Emitting Diodes: Research, Manufacturing, and Applications V, San Jose, CA, USA, SPIE, 99-108.
200. Sun, C.C., Lee, T.X., Ma, S.H., Lee, Y.L. and Huang, S.M. (2006), "Precise optical modeling for LED lighting verified by cross correlation in the midfield region," Optics Letters 31(14):2193-2195.
201. Borbely, A. and Johnson, S.G. (2004), "Performance of phosphor-coated LED optics in ray trace simulations," Fourth International Conference on Solid State Lighting, Denver, CO, USA, SPIE, 266-273.
202. Liu, Z.Y., Liu, S.,Wang, K. and Luo, X.B. (2009), "Optical analysis of phosphor's location for high-power lightemitting diodes," IEEE Transactions on Device and Materials Reliability 9(1):65-73.
203. Lee, T.X., Lin, C.Y., Ma, S.H. and Sun, C.C. (2005), "Analysis of position-dependent light extraction of GaNbased LEDs," Optics Express 13(11):4175-4179.
204. Nagarajan, S., Oh, T.S.,Kumar, M.S., Hong, C.H., and Suh, E.K. (2007), "Structural and Optical Properties of In- Rich InAlGaN/InGaN Heterostructures for White Light Emission," Japan Journal of Applied Physics 47:4413-4416.
205. Peng, T. and Piprek, J. (1996), "Refractive index of AlGaInN alloys," Electronics Letters 32(24):2285-2286.
206. Brunner, D., Angerer, H., Bustarret, E., Freudenberg, F., Hopler, R., Dimitrov, R., Ambacher, O. and Stutzmann, M. (1997), "Optical constants of epitaxial AlGaN films and their temperature dependence," Journal of Applied Physics 82(10):5090-5096.
207. Bergmann, M.J. and Casey, J.H.C. (1998), "Optical-field calculations for lossy multiple-layer AlxGa1-xN/InxGa1- xN laser diodes," Journal of Applied Physics 84(3):1196-1203.
208. Laws, G.M., Larkins, E.C., Harrison, I., Molloy, C. and Somerford, D. (2001), "Improved refractive index formulas for the AlxGa1-xN and InyGa1-yN alloys," Journal of Applied Physics 89(2):1108-1115.
209. Anani, M., Abid, H., Chama, Z., Mathieu, C., Sayede, A. and Khelifa, B. (2007), "InxGa1-xN refractive index calculations," Microelectronics Journal: 262-266.
210. Ambacher, O., Rieger,W., Ansmann, P., Angerer, H., Moustakas, T.D. and Stutzmann, M. (1996), "Sub-bandgap absorption of gallium nitride determined by photothermal deflection spectroscopy," Solid State Communications 97(5):365-370.
211. Bentoumi, G., Deneuville, A., Beaumont, B. and Gibart, P. (1997), "Influence of Si doping level on the Raman and IR reflectivity spectra and optical absorption spectrum of GaN," Materials Science and Engineering B 50 (1-3):142-147.
212. Yu, G., Wang, G., Ishikawa, H., Umeno, M., Soga, T., Egawa, T., Watanabe, J. and Jimbo, T. (1997), "Optical properties of wurtzite structure GaN on sapphire around fundamental absorption edge (0.78-4.77 eV) by spectroscopic ellipsometry and the optical transmission method," Applied Physics Letters 70(24):3209-3211.
213. Schad, S.S., Neubert, B., Eichler, C., Scherer, M., Habel, F., Seyboth, M., Scholz, F., Hofstetter, D., Unger, P., Schmid,W., Karnutsch, C. and Streubel, K. (2004), "Absorption and Light Scattering in InGaN-on-Sapphire- and AlGaInP-Based Light-Emitting Diodes," Journal of Lightwave Technology 22(10):2323.
214. Lelikov, Y., Bochkareva, N., Gorbunov, R., Martynov, I., Rebane, Y., Tarkin, D. and Shreter, Y. (2008), "Measurement of the absorption coefficient for light laterally propagating in light-emitting diode structures with In0.2Ga0.8N/GaN quantum wells," Semiconductors 42(11):1342-1345.
215. Martin, R.W., Middleton, P. G., O'Donnell, K. P. and Van der Stricht, W. (1999), "Exciton localization and the Stokes' shift in InGaN epilayers," Applied Physics Letters 74(2):263-265.
216. Damilano, B., Grandjean, N., Massies, J., Siozade, L. and Leymarie, J. (2000), "InGaN/GaN quantum wells grown by molecular-beam epitaxy emitting from blue to red at 300 K," Applied Physics Letters 77(9):1268-1270.
217. Kvietkova, J., Siozade, L., Disseix, P., Vasson, A., Leymarie, J., Damilano, B., Grandjean, N. and Massies, J. (2002), "Optical Investigations and Absorption Coefficient Determination of InGaN/GaN Quantum Wells," Physica Status Solidi 190(1):135-140.
218. Narendran, N., Gu, F., Freyssinier-Nova, J.P. and Zhu, Y. (2005), "Extracting phosphor-scattered photons to improve white LED efficiency," Physica Status Solidi 202(6): R60-R62.
219. Kang, D.Y., Wu, E. and Wang, D.M. (2006), "Modeling white light-emitting diodes with phosphor layers," Applied Physics Letters 89(23):231102.
220. Liu, Z.Y., Liu, S.,Wang, K., and Luo, X.B. (2009), "Measurement and numerical studies of optical properties of YAG: Ce phosphor for white LED packaging," Applied Optics, Submitted.
221. Bohren, C.F. and Huffman, D.R. (1983), Absorption and scattering of light by small particles, Wiley.
222. Jonasz, M. and Fournier, G.R. (2007), Light scattering by particles in water, Elsevier.
223. Narendran, N. (2005), "Improved performance white LED," Fifth International Conference on Solid State Lighting, San Diego, CA, USA, SPIE, 594108-1-594108-6.
224. Allen, S.C. and Steckl, A.J. (2008), "A nearly ideal phosphor-converted white light-emitting diode," Applied Physics Letters 92(14):143309.
225. Tran, N.T. and Shi, F.G. (2008), "Studies of phosphor concentration and thickness for phosphor-based white light-emitting-diodes," Journal of Lightwave Technology 26(21):3556-3559.
226. Sommer, C., Wenzl, F.P., Hartmann, P., Pachler, P., Schweighart, M. and Leising, G. (2008), "Tailoring of the color conversion elements in phosphor-converted high-power LEDs by optical simulations," IEEE Photonics Technology Letters 20(9):739-741.
227. Liu, Z.Y., Liu, S., Wang, K. and Luo, X.B. (2008), "Effects of phosphor's location on LED packaging performance," 2008 International Conference on Electronic Packaging Technology & High Density Packaging, Shanghai, China, IEEE, 4606982-1-7.
228. Muller, G., Muller, R., Basin, G.,West, R.S., Martin, P.S., Lim,T.S. and Eberle, S. (2008),LEDwith phosphor tile and overmolded phosphor in lens, U. S. Patent, Philips Lumileds Light Company, LLC. 20 080 048 200.
229. Chen, G., Craven, M., Kim, A., Munkholm, A., Watanabe, S., Camras, M., G€otz, W. and Steranka, F. (2008), "Performance of high-power III-nitride light emitting diodes," Physica Status Solidi (a) 205(5):1086-1092.
230. Lee, J.H., Oh, J.T., Choi, S.B., Woo, J.G., Lee, S.Y. and Lee, M.B. (2007), "Extraction-efficiency enhancement of InGaN-based vertical LEDs on hemispherically patterned sapphire," Physica Status Solidi (c) 4(7):2806-2809.
231. Erchak, A.A., Ripin, D.J., Fan, S., Rakich, P., Joannopoulos, J.D., Ippen, E.P., Petrich, G.S. and Kolodziejski, L.A. (2001), "Enhanced coupling to vertical radiation using a two-dimensional photonic crystal in a semiconductor light-emitting diode," Applied Physics Letters 78(5):563-565.
232. Hwang, J. M., Lee, K. F. and Hwang, H. L. (2008), "Optical and electrical properties of GaN micron-scale lightemitting diode," Journal of Physics and Chemistry of Solids 69(2-3):752-758.
233. China Solid State Lighting Alliance. (2006), China Solid-State Lighting Industry Development Almanac, Beijing, Science Press. (In Chinese).
234. Lee, T.X., Gao, K.F., Chien,W.T. and Sun, C.C. (2007), "Light extraction analysis of GaN-based light-emitting diodes with surface texture and/or patterned substrate," Optics Express 15(11):6670-6676.
235. Wang, K., Liu, S., Chen, F., Liu, Z.Y. and Luo, X.B. (2009a), "Novel application-specific LED packaging with compact freeform lens," IEEE 59th Electronic Components & Technology Conference, San Diego, CA, USA.
236. Arik, M., Petroski, J., and Weaver, S. (2001), "Thermal challenges in the future generation solid state lighting applications: light emitting diodes," ASME/IEEE international packaging technical conference, Hawaii, USA, 113-120.
237. Arik, M., Petroski, J. and Weaver, S. (2002), "Thermal challenges in the future generation solid state lighting applications: light emitting diodes," 8th Intersociety conference on thermal and thermomechanical phenomena in electronic systems, San Diego, CA, USA, IEEE, 113-120.
238. Arik, M., and Weaver, S. (2004), "Chip scale thermal management of high brightness LED packages," Proceeding of SPIE, 5530:214-223.
239. Arik, M. and Weaver, S. (2005), "Effect of chip and bonding defects on the junction temperatures of highbrightness light-emitting diodes," Optical Engineering, 44(11):111305-1-8.
240. Holman, J.P. (2002), Heat Transfer, Boston, McGraw-Hill Press.
241. Yang, S.M., and Tao, W.Q. (1998), Heat Transfer, Beijing, Higher Education Press. (In Chinese)
242. You, S.M. and Lee, S. (2004), "High power microelectronics thermal management and packaging fundamentals," Tutorial in Proceedings Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronics Systems, Las Vegas, Nevada, p. 4.
243. Cheng, S.M., Huang, S.Y., Bai, C.Y., and Wei, B.W. (1990), Heat Transfer, Beijing, Higher Education Press. (In Chinese)
244. Haque, S., Steigerwald, D., Rudaz, S., Steward, B., Bhat, J., Collins, D.,Wall, F., Subramanya, S., Elpedes, C., and Elizondo, P. (2000), "Packaging challenges of high-power LEDs for solid state lighting,"www.lumileds.com/ pdfs/techpaperspres/manuscript_IMAPS_2003.PDF
245. Krames M. R, Shchekin O. B, Mueller-Mach R, Mueller G.O., Zhou, L., Harbers G., and Craford M.G., (2007), "Status and future of high-power light-emitting diodes for solid-state lighting," Journal of Display Technology, 3(2):160-175.
246. Daniel, A.S., Jerome, C.B., and Dave, C. (2002), "Illumination with solid state lighting technology," IEEE Journal on Selected Topic in Quantum Electronics, l8(2):310-320.
247. Carl, Z. (2004), "Newmaterial options for light emitting diode packaging," Proceedings of SPIE, 5366:173-182.
248. Fan, B.F., Zhao, Y., Xian, Y.L., and Wang, G. (2006), "Thermal simulation studies of high-power light-emitting diodes. In: Advanced LEDs for Solid State Lighting," Proceedings of SPIE, 6355, 63550D-4.
249. Liu, Z.Y., Liu, S., Wang, K., and Luo, X.B. (2009), "Status and prospects for phosphor-based white LED packaging," Frontiers of Optoelectronics in China. 2(2):119-140.
250. Park, J. K., Shin, H. D., Park,Y. S., Park, S.Y., Hong, K. P., Kim, B. M. A suggestion for high power LED package based on LTCC. In: Proceedings of the 56th Electronic Components and Technology Conference. 2006, 1070-1075.
251. Shin, M. W., Thermal design of high-power LED package and system. In: Advanced LEDs for Solid State Lighting. Gwangju: SPIE, 2006, 6355:635509
252. Yang, L., Jang, S., Hwang,W., Shin, M. Thermal analysis of highpower GaN-based LEDs with ceramic package. Thermochimica Acta, 2007, 455(1-2):95-99.
253. Kim, K.M., Shin, S.H., Lee,Y.K., Choi, S.M., and Kwon,Y.S. (2008), "Aluminium-based packaging platform for LED using selectively anodising method," Electronics Letters 44(1):24-25.
254. Lau, J.H. and Pao,Y.H. (1999), Solder Joint Reliability of BGA, CSP, Flip Chip, and Fine Pitch SMTAssemblies, New York, McGraw-Hill.
255. Merrill, L.M. and Cyril, A.D. (1989), Electronic Materials Hand Book Volume 1 Packaging. ASM International.
256. Alliance for Solid-State Illumination Systems and Technologies (ASSIST) (2005), "ASSIST Recommends: LED Life for General Lighting," http://www.lrc.rpi.edu
257. Pecht, M. and Nash, F.R. (1994), "Predicting the reliability of electronic equipment," Proceedings of the IEEE. 82 (7):992-1004.
258. Pecht, M. and Kang, W.C. (1988), "A critique of Mil-Hdbk-217E reliability prediction methods," IEEE Transactions on Reliability 37(5):453-457.
259. Pecht, M. (2009), "A newperspective on electronic product reliability," Invited Talk,Wuhan National Laboratory for Optoelectronics, China, May, 2009.
260. Lall, P., Bhat, C., Hande, M.H., More,V.K., Vaidya, R.H. and Pandher R.J. (2008), "Interrogation of system state for damage assessment in lead-free electronics subjected to thermo-mechanical loads," IEEE 58th Electronic Components & Technology Conference, Lake Buena Vista, FL, USA, ECTC, 918-929.
261. Bowles, J.B. (1992), "A survey of reliability prediction procedures for microelectronic devices," IEEE Transactions on Reliability 41(1):2-12.
262. Dylis, D.D. and Priore, M.G. (2001), "A comprehensive reliability assessment tool for electronic systems," Proceedings of the Annual Reliability and Maintainability Symposium, IEEE, Philadelphia, PA, USA, RAMS, 308-313.
263. Edson, B. and Tian, X. (2004), "A prediction based design-for-reliability tool," Proceedings of the Annual Reliability and Maintainability Symposium, IEEE, Los Angeles, CA, RAMS, 412-417.
264. Leonard, C.T. and Pecht, M. (1989), "Failure prediction methodology calculations can mislead: use them wisely, not blindly," Proceedings of the Aerospace and Electronics Conference, IEEE, Dayton, OH, USA, NAECON, 1887-1892.
265. Hansen, C.K. (1995), "Reliability prediction and simulation for a communications satellite fleet," Proceedings of the Annual Reliability and Maintainability Symposium, IEEE, Washington, DC, USA, RAMS, 152-158.
266. Xie, J. S. and Michael, P. (2003), "Reliability prediction modeling of semiconductor light emitting device," IEEE Transactions on Device and Materials Reliability 3(4):218-222.
267. Liu, S., Luo, X.B., Chen, H., Cao, G.,Wang, X.P., Cao,W.,Wang, K. and Jin, C.X. (2009), Awireless intelligent control system for high power LEDs, China Patent Application: 200910038193.9.
268. Liu, S. and Mei, Y.H. (1995), "Behavior of delaminated plastic IC package subjected to encapsulation cooling, moisture absorption, and wave soldering," IEEE Transactions on Component, Packaging, and Manufacturing Technology 18(3):634-645.
269. Liu, S., Zhu, J.S., Hu, J.M. and Pao, Y.H. (1995), "Investigation of crack propagation in ceramic/conductive epoxy/glass systems," IEEE Transactions on Components, Packaging, and Manufacturing Technology Part A 18 (3):627-633.
270. Tan, L.X., Li, J., Liu, S., Gan, Z.Y. andWang, K. (2007), "Effect of defects on thermal and optical performance of high power LEDs," 4th China International Forum on Solid State Lighting, Shanghai, P.R. China, China SSL, 304-309.
271. Chen,Z.H., Li, J.,Wang,K.andLiu, S. (2008), "The simulation of interfacial stress in high brightness light emitting diodes," 5th China International Forum on Solid State Lighting, Shenzhen, P.R. China, China SSL, 349-353.
272. Liu, S. (1992), "Damage Mechanics of Cross-ply Laminates Resulting from Transverse Concentrated Loads," Ph.D. dissertation, Mechanical Engineering Department, Stanford University, Aug. 1992.
273. Liu, S., Mei,Y.H. andWu, T.Y. (1995), "Bimaterial interfacial crack growth as a function of mode-mixity," IEEE Transactions on Components, Packaging, and Manufacturing Technology. Part A 18(3):618-626.
274. Wang, J.J., Lu, M.F., Ren, W., Zou, D.Q. and Liu, S. (1999), "A study of the mixed-mode interfacial fracture toughness of adhesive joints using a multi-axial fatigue tester," IEEE Transactions Electronics Packaging Manufacture Technology 22(2):166-184.
275. Suo, Z. and Hutchinson, J.W. (1989), "Sandwich test specimens for measuring interface crack toughness," Materials Science and Engineering A 107:135-143.
276. Suo, Z. (1990), "Delamination specimens for orthotropic materials," Journal of Applied Mechanics 57:627-634.
277. Jih, C.J. and Sun, C.T. (1992), "Evaluation of a finite element based crack closure method for calculating static and dynamic strain energy release rates," Engineering Fracture Mechanics 37:313-322.
278. Rybicki, E.F. and Kenninen, M.F. (1977), "A finite element calculation of stress intensity factors by a modified crack closure integral," Engineering Fracture Mechanics 9:931-938.
279. Liu, S., Kutlu, Z. and F.K. Chang (1991), "Matrix cracking and delamination in laminated polymeric composites resulting from transversely concentrated loadings," Proceeding of the 1st International Conference on Deformation, Fracture. Composites, 30/1-30/7
280. Sun, C.T. and Manoharan, M.G. (1987), "Strain energy release rates of an interfacial crack between two orthotropic solids," Proceeding of American Society for Composites, 2nd Technical Conference, 49-57.
281. Cree X Lamp LED Reliability Datasheet, Cree, Inc., www.cree.com/xlamp.
282. Luxeon-K2 Reliability Datasheet RD06, Philips Lumileds Lighting Company, www.luxeon.com.
283. Wolter, K.J., Oppermann, M. and Zerna, T. (2008), "Nano packaging a challenge for non-destructive testing," 10th Electronics Packaging Technology Conference, Singapore, EPTC, 873-878.
284. Monemar, B. (1974), "Fundamental energy gap of GaN from photoluminescence excitation spectra," Physical Review 10(2):676-681.
285. Christensen, A., Nicol, D., Ferguson, I. and Graham, S. (2005), "Thermal design considerations in the packaging of GaN based light emitting diodes," Proceedings of the SPIE, San Diego, California, USA, SPIE, 594118.1-594118.14.
286. Mehmet, A. and Stanton, W. (2004), "Chip scale thermal management of high brightness LED packages," Proceedings of the SPIE, Denver CO, SPIE, 214-223.
287. Meneghini, M., Trevisanello, L.R., Meneghesso, G. and Zanoni, E. (2008), "A review on the reliability of GaNbased LEDs," IEEE Transactions on Device and Material Reliability 8(2):323-331.
288. Narendran, N. and Gu, Y. M. (2005), "Life of LED-based white light sources," IEEE/OSA Journal of Display Technology 1(1):167-171.
289. Hsu, Y.C., Lin, Y.K., Chen, M.H., Tsai, C.C., Kuang, J.H., Huang, S.B., Hu, H.L., Su, Y.I. and Cheng, W.H. (2008), "Failure mechanisms associated with lens shape of high-power LED modules in aging test," IEEE Transactions on Electron Devices 55(2):689-694.
290. Teh, L.K., Wong, C.C. and Mhaisalkar, S. (2004), "Characterization of nonconductive adhesives for Flip-Chip interconnection," Journal of Electronic Materials 33(4):271-276.
291. Lu, M.G., Shim, M.J. and Kim, S.W. (2001), "Effects of moisture on properties of epoxy molding compounds," Journal of Applied Polymer Science 81(6):2253-2259.
292. Hu, J.Z., Yang, L.Q. and Shi, M.W. (2007), "Mechanism and thermal effect of delamination in light-emitting diode packages," Microelectronics Journal 38:157-163.
293. Jacob, P., Kunz, A. and Nicoletti, G. (2006), "Reliability and wearout characterization of LEDs," Microelectronics Reliability 46:1711-1714.
294. Cao, X.A., Sandvik, P.M., LeBoeuf, S.F. and Arthur, S.D. (2003), "Defect generation in InGaN/GaN lightemitting diodes under forward and reverse electrical stresses," Microelectronics Reliability 43:1987-1991.
295. Chen, C.H., Tsaiand, W.L. and Tsai, M.Y. (2008), "Thermal resistance and reliability of low-cost high-power LED packages under WHTOL test," International Conference on Electronic Materials and Packaging, Taipei, China, EMAP, 271-276.
296. Grillot, P.N., Krames, M.R., Zhao, H. and Teoh, S.H. (2006), "Sixty thousand hour light output reliability of AlGaInP light emitting diodes," IEEE Transactions on Device and Materials Reliability 6(4):564-574.
297. Shen, H., Pan, J. and Feng, H. (2007), "Accelerated life test for high-power white LED based on spectroradiometric measurement," Proceedings of SPIE, Beijing, China, SPIE, 684104.1-684104.9.
298. Qian, Z.F., Lu, M.F. and Liu, S. (1997), "Constitutive modeling of polymer films from viscoelasticity to viscoplasticity," ASME Manufacturing Science and Engineering 6(1):377-382.
299. Ren,W., Qian, Z.F. and Liu, S. (1998), "Thermal-mechanical creep of two solder alloys," IEEE 48th Electronic Components & Technology Conference, Seattle, USA, ECTC, 1431-1437.
300. Wang, J. J, Zou, D.Q. and Liu, S. (1997), "Evaluation of interfacial fractures toughness of a bi-material system under thermal loading conditions," ASME Manufacturing Science and Engineering 6(1):411-421.
301. Zhu, F.L., Zhang, H.H., Guan, R.F. and Liu, S. (2007), "The effect of temperature and strain rate on the tensile properties of a Sn99.3Cu0.7 (Ni) lead-free solder alloy," Microelectronic Engineering 84:144-150.
302. Zhang, Q., Mu, X.,Wang, K., Gan, Z. Y., Luo, X. B. and Liu, S. (2008), "Dynamic mechanical properties of the transparent silicone resin for high power LED packaging," International Conference on Electronic Packaging Technology & High Density Packaging, Shanghai, China, ICEPT-HDP, 1-4.
303. Karlicek, R.F., Jr., (2005), "High power LED packaging," Conference on Lasers & Electro-Optics, Baltimore, Maryland, CLEO, 337-339.
304. Kanninen, M.F. and Popelar, C. H. (1985), Advanced Fracture Mechanics, New York, Clarendon Press.
305. Lu, M.F., Ren, W., Liu, S. and Shangguan, D. K. (1997), "A unified multi-axial sub-micron fatigue tester with applications to electronic packaging materials," Electronic Components and Technology Conference. San Jose, California, USA, ECTC, 144-148.
306. Liu, S. and Liu, Y. (2009), Modeling and Simulation for Packaging Assembly: Manufacture, Reliability and Testing, New York, John Wiley and Sons.
307. Wang, J.J., Lu, M.F., Zou, D.Q. and Liu, S. (1998), "Investigation of interfacial fracture behavior of a flip-chip package under a constant concentrated load," IEEE Transactions Electronics Packaging Manufacture Technology 21(1):79-87.
308. Narendran, N., Gu, Y., Freyssinier-Nova, J.P. and Zhu, Y. (2005), "Extracting phosphor-scattered photons to improve white LED efficiency," Physical Status Solid (A) 202(6):60-61.
309. Yeh, C.L. and Lai, Y.S. (2006), "Comprehensive dynamic analysis of wire bonding on Cu/low-k wafers," IEEE Transactions on Advanced Packaging 29(2):264-270.
310. Yeh, C.L. and Lai, Y.S. (2006), "Transient simulation of wire pull test on Cu/low-k wafers," IEEE Transactions on Advanced Packaging 29(3):631-638.
311. Liu, Y., Irving, S. and Luk, T. (2004), "Thermo-sonic wire bonding process simulation and bond pad over active stress analysis," Proceedings of 54th Electronic Components andTechnology Conference, USA,ECTC,383-391.
312. Liu, Y., Allen, H., Luk, T. and Irving, S. (2006), "Simulation and experimental analysis for a ball stitch on bump wire bonding process above a laminate substrate," Proceedings of 56th Electronic Components and Technology Conference, USA, ECTC, 1918-1923.
313. Medvedovski, E., Alvarez, N., Yankov, O. and Olsson M. K. (2008), "Advanced indium-tin oxide ceramics for sputtering targets," Ceramics International 34(5):1173-1182.
314. Evans, D.L. (1997), "High-luminance LEDs replace incandescent lamps in newapplications," Proc. SPIE, Light- Emitting Diodes: Research, Manufacturing, and Applications, San Jose, CA, USA, 142-153.
315. Craford, M.G. (2005). LEDs for solid state lighting and other emerging applications: status, trends, and challenges. 5th International Conference on Solid State Lighting. I.T. e. a. Ferguson. San Diego, CA, USA: 594101.1-594101.10.
316. Chen, G., Craven, A., Kim, A.M.,Watanabe, S., Camras, M., G€otz,W. and Steranka, F. (2008), "Performance of High-power III-nitride Light Emitting Diodes," Physica Status Solidi (a) 205(5):1086-1092.
317. Jiang, J.B. and To, S. (2008). LED secondary optics design. 5th China International Exhibition&Forum on Solid State Lighting. Shenzhen, China.
318. Wang, K., Liu, S. and Luo, X.B. (2007a). A sensor integrated ultra-long span LED street lamp system. 8th International Conference on Electronics Packaging Technology. Shanghai, China.
319. Liu, S., Luo, X.B., Gan, Z.Y., Chen, M.X.,Wang, K. and Liu, Z.Y. (2008). Ultra-long span high power LED street lamp. China Patent. ZL200720073271.5.
320. Schl€oder, U. (2007), "New optical concepts for headlamps with LED arrays," SAE Papers 2007-01-0869.
321. Dross, O., Mohedano, R., Benítez, P., Miñano, J.C., Chaves, J., Blen, J., Hernández, M. and Muñoz, F. (2004), "ReviewofSMS designmethods and realworld applications," Proceedings of SPIE,Bellingham,WA, USA, 35-47.
322. Wang, K., Liu, S., Luo, X.B., Liu, Z.Y. and Chen, F. (2008). Optical analysis of a 3-WLEDMR16 lamp. IEEE 9th International Conference on Electronics Packaging Technology & High Density Packaging. Shanghai, China: 456-460.
323. Sun, C.C., Lee, T.X., Ma, S.H., Lee, Y.L. and Huang, S.M. (2006), "Precise optical modeling for LED lighting verified by cross correlation in the midfield region," Optics Letters 31(14):2193-2195.
324. Wang, K., Luo, X.B., Liu, Z.Y., Zhou, B., Gan, Z.Y. and Liu, S. (2008), "Optical analysis of an80Wlight-emitting diode street lamp," Optical Engineering 47(1):013002.
325. Benítez, P., Miñano, J.C., Blen, J., Mohedano, R., Chaves, J., Dross, O., Hernández, M. and Falicoff,W. (2004), "Simultaneous multiple surface optical design method in three dimensions," Optical Engineering 43(7):1489-1502.
326. Winston, R., Miñano, J.C. and Benítez, P. (2005), Nonimaging Optics, San Diego,USA, Elsevier Academic Press.
327. Wang, K., Liu, S., Chen, F., Qin, Z., Liu, Z.Y. and Luo, X.B. (2009), "Freeform LED lens for rectangularly prescribed illumination," Journal of Optics A: Pure and Applied Optics Accepted.
328. Ries, H. and Muschaweck, J. (2002), "Tailored freeform optical surfaces," Journal of the Optical Society of America A 19(3):590-595.
329. Wang, L., Qian, K.Y. and Luo, Y. (2007), "Discontinuous free-form lens design for prescribed irradiance," Applied Optics 46(18):3716-3723.
330. Ding,Y., Liu, X., Zheng, Z.R. and Gu, P.F. (2008), "FreeformLEDlens for uniform illumination," Optics Express 16(17):12958-12966.
331. Ries, H. and Rabl, A. (1994), "Edge-ray principle of nonimaging optics," Journal of the Optical Society of America A 11(10):2627-2632.
332. Piegl, L. and Tiller, W. (1997), The NURBS Book 2nd ed, Berlin, Springer.
333. Moreno, I. and Sun, C.C. (2008), "Modeling the radiation pattern of LEDs," Optics Express 16(3):1808-1819.
334. Wang, K., Liu, S., Chen, F., Liu, Z.Y. and Luo, X.B. (2009), "Effect of manufacturing defects on optical performance of discontinuous freeform lenses," Optics Express 17(7):5457-5465.
335. West, R.S.,Kobijn, H., Sillevis-Smitt,W.,Kuppens, S., Pfeffer, N., Martynov,Y.,Yagi, T., Eberle, S., Harbers, G., Tan, T.W. and Chan, C.E. (2003), "High brightness direct LED backlight for LCD-TV," SID International Symposium Digest of Technical Papers 43(4):1262-1265.
336. Wang, K., Liu, S., Chen, F., Liu, Z.Y. and Luo, X.B. (2009). Novel application-specific LED packaging with compact freeform lens. IEEE 59th Electronic Components & Technology Conference. San Diego, CA, USA: 2125-2130.
337. Chang, S.I. and Yoon, J.B. (2006), "Microlens array diffuser for a light-emitting diode backlight system," Optics Letters 31(20):3016-3018.
338. Hu, Y.J., Lee, J.C., Wang, Y.P., Wu, Y.F. and Sheu, L.G. (2007), "Diffuser array for a light-emitting diode backlight system," Nonimaging Optics and Efficient Illumination Systems IV San Diego, CA, USA.
339. Wang, Y.N. (2008). Application Study on Illumination Quality Improvement of Tri-chromatic White Light Emitting Diodes. College of Electrical Engineering. Chongqing, Chongqing University. Master of Engineering: 78. (In Chinese).
340. Wang, S.M. (2009). LED applications in Wuxi Lingshan Buddhist temple. 3rd China International Forum on Novel Light & Energy Sources. Shanghai, China.
341. Luo, X.B., Cheng, T., Xiong,W., Gan, Z.Y. and Liu, S. (2007), "Thermal analysis of an 80W light-emitting diode street lamp," IET Optoelectronics 1(5):191-196.
342. Song, S., Lee, S. and Au, V. (1994). Closed-form equation for thermal constriction/spreading resistances with variable resistance boundary condition. Proceedings of the 1994 International Electronics Packaging Conference. Atlanta, Georgia, USA.
343. Lee, S., Song, S., Au, V. and Moran, K.P. (1995). Constriction/spreading resistance model for electronics packaging. ASME/JSME Thermal Engineering Conference. Maui, Hawaii, USA.
344. Luo, X.B., Xiong,W., Cheng,T. and Liu, S. (2009). Design and optimization of horizontally-located plate fin heat sink for high power LED street lamp. 59th Electronic Components and Technology Conference. San Diego, CA, USA.
345. Hollands, K.G.T. and Uuny, S.E. (1976), "Free convective heat transfer across inclined air layers," Journal of Heat Transfer, 98:189-190.
346. Segiel, R. and Norris, R.H. (1957), "Tests of free convection in a partially enclosed space between two heated vertical plates," Trans ASME of Heat and Mass Transfer 79:663-674.
347. Luo, X.B., Xiong, W. and Liu, S. (2008). A simplified Thermal resistance network model for high power LED street lamp. IEEE 9th International Conference on Electronics Packaging Technology & High Density Packaging. Shanghai, China.
348. Liu, S., Lin, T., Luo, X.B., Chen, M.X. and Jiang, X.P. (2006). A microjet array cooling system for thermal management of active radars and high-brightness LEDs. 56th Electronic Components&Technology Conference. San Diego, CA, USA: 1634-1638.
349. Luo, X.B. and Liu, S. (2006). A closed micro jet cooling system for high power LEDs. IEEE 7th International Conference on Electronics Packaging Technology. Shanghai, China: 592-598.
350. Luo, X.B. and Liu, S. (2007), "A microjet array cooling system for thermal management of high-brightness LEDs," IEEE Transactions on Advanced Packaging 30(3):475-484.
351. Luo, X.B., Chen,W., Sun, R.X. and Liu, S. (2008), "Experimental and numerical investigation of a microjet based cooling system for high power LEDs," Heat Transfer Engineering 29(9):774-781.
352. Holman, J.P. (1997), Heat Transfer, 8th Edition International Edition, Boston, McGraw-Hill Book Company.
353. Bar-Cohen, A. and Rohsenow,W. M. (1984), "Thermally optimum spacing of vertical, natural convection cooled, parallel plates," Journal of Heat Transfer 106:116-123.
354. Churchill, S. W. and Usagi, R. (1972), "A general expression for the correlation of rates of transfer and other phenomena," AIChE Journal 18(6):1121-1128.
355. Fujii, T., Gao, Y., Shama, R., Hu, E.L., DenBaars, S.P., and Nakamura, S. (2004), "Increase in the extraction efficiency of GaN-based light-emitting diodes via surface roughening," Applied Physics Letters 84(6):855-857.
356. Park, S.C., Lee, D.H., Kim, Y.W., and Park, S.N. (2007), "Uncertainty evaluation for the spectroradiometric measurement of the averaged light-emitting diode intensity," Applied Optics 46(15):2851-2858.
357. Miller, C.C., Zong, Y.Q., and Ohno, Y. (2004), "LED photometric calibrations at the National Institute of Standards and technology and future measurement needs of LEDs," Fourth International Conference on Solid State Lighting, Proceedings of SPIE 5530:69-79.
358. Young, R. (2006), "Measuring light emission from LEDs," Advanced LEDs for Solid State Lighting, Proceedings of SPIE 6355 (63550H): 1-11.
359. Liu, M.Q., Zhou, X.L., Li,W.Y., Chen,Y.Y., and Zhang,W.L. (2008), "Study on methodology of LED's luminous flux measurement with integrating sphere," Journal of Physics D: Applied Physics 41:1-5.
360. Johansson, T. and Pettersson, A. (1997), "Imaging spectrometer for ultraviolet-near-infrared microscopy," Review of Scientific Instruments 68(5):1962-1971.
361. Shen, H.P., Pan, J.G., Feng, H.J., and Liu, M.Q. (2009), "Stray light errors in spectral color measurement and two rejection method," Metrologia 46:129-135.
362. Ho, C.H. (2001), "A practical and inexpensive design for measuring the radiation patterns and luminescent spectra of optoelectronic devices," Review of Scientific Instruments 72(7):3103-3107.
363. Manninen, P., Hovila, J., Karha, P., and Ikonen, E. (2007), "Method for analysing luminous intensity of lightemitting diodes," Measurement Science and Technology 18:223-229.
364. B€urmen, M., Pernuš, F., and Likar, B. (2008), "LED light sources: a survey of quality-affecting factors and methods for their assessment" Measurement Science and Technology 19:1-15.
365. Zhou, S.J., and Liu, S. (2009) "Transient measurement of LED characteristic parameters for production lines," Review of Scientific Instruments 80(095102):1-7.