Sensors and actuators: Finite element and boundary element analyses and simulations. A bibliography (1997-1998)

Finite elements in analysis and design

Volumn 33, Issue 3, 1999, Pages 209-220

  Mackerle, Jaroslav ^a  

^a LINKÖPING INSTITUTE OF TECHNOLOGY   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

ACTUATORS; BIBLIOGRAPHIES; BOUNDARY ELEMENT METHOD; FINITE ELEMENT METHOD; SENSORS; TECHNICAL PRESENTATIONS;

DISSERTATIONS; THESES;

MATHEMATICAL MODELS;

EID: 0033317999     PISSN: 0168874X     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0168-874X(99)00019-0     Document Type: Short Survey

References (247)

1. H. Abramovich, B. Pletner, Actuation and sensing of piezolaminated sandwich type structures, Compo. Struct. 38 (1/4) (1997) 17-27.
2. F. Aghili et al., Joint torque sensor for robots, ASME International Mechanical Engineers Congress Exposition, Dallas, ASME, 1997, pp. 1-8.
3. O.J. Aldraihem, R.C. Wetherhold, Mechanics and control of coupled bending and twisting vibration of laminated beams, Smart Mater. Struct. 6 (2) (1997) 123-133.
4. M. Andersson, Noise robust actuator placement on flexible structures, 36th Conference on Decision Control, vol. 2, IEEE, New York, 1997, pp. 1958-1959.
5. S. Ando et al., Fishbone architecture: an equivalent mechanical model of cochlea and its application to sensors and actuators, International Conference on Solid-State Sensors Actuators, Vol. 2, Chicago, 1997, pp. 1027-1030.
6. A.K.D. Anim, S.M. Riad, Analysis and design of ferrite cores for eddy current killed oscillator inductive proximity sensors, IEEE Trans. Magn. 33 (3) (1997) 2274-2278.
7. Y. Ansel et al., Global model generator for a capacitive silicon accelerometer by finite element analysis, Sensors Actuators A, Phys. 67 (1/3) (1998) 153-158.
8. E.E. Antonova, P.P. Silvester, Finite elements for piezoelectric vibrations with open electric boundaries, IEEE Trans. Ultrason. Ferroelectr. 44 (3) (1997) 548-556.
9. 2 gas sensor using a FEM simulator, Sensors Actuators A, Phys. 69 (3) (1998) 205-211.
10. M.M. Athavale et al., Coupled fluid-thermo-structures simulation methodology for MEMS application, International Conference on Solid-State Sensors Actuators, Vol. 2 Chicago, 1997, pp. 1043-1046.
11. H. Bahrami, H.S. Tzou, Design and analysis of a precision multi-DOF placement device, ASME International Mechanical Engineers Congress Exposition, Vol. AD 54, ASME, New York, 1997, pp. 1-7.
12. C. Barthod, G. Lemarquand, Design of an actuator being both a permanent magnet synchronous motor and a magnetic suspension, IEEE Trans. Magn. 34 (4) (1998) 2105-2107.
13. S. Basrour et al., Mechanical characterization of microgrippers realized by LIGA technique, International Conference on Solid-State Sensors Actuators, Chicago, IEEE, 1997, pp. 599-602.
14. A. Benjeddou et al., New shear actuated smart structure beam element, 39th Str., Structural Dynamics Materials Conference Exh., Vol. 3, Long Beach, 1998, pp. 1831-1839.
15. J. Bennett, G. Hayward, Design of 1-3 piezocomposite hydrophones using finite element analysis, IEEE Trans. Ultrason. Ferroelectr. 44 (3) (1997) 565-574.
16. A.P.F. Bernhard, I. Chopra, Hover testing of an active rotor blade tip and structural analysis of the actuator beam, 39th Str., Structural Dynamics Materials Conference Exh., Vol. 4, Long Beach, 1998, pp. 3299-3325.
17. J.S. Bevan, C. Mei, Comparison of experiments with finite element analysis of plates with piezoelectric sensors/actuators, 39th Str., Structural Dynamics Materials Conference Exh., Vol. 4, Long Beach, 1998, pp. 2814-2819.
18. G. Bistue et al., A design tool for pressure microsensors based on FEM simulations, Sensors Actuators A, Phys. 62 (1/3) (1997) 591-594.
19. G. Bitko et al., Effect of inorganic thin film material processing and properties on stress in silicon piezoresistive pressure sensors, 1996 MRS Fall Meeting, Boston, Vol. 444, 1997, pp. 221-226.
20. R. Boelter, H. Janocha, Design rules for MR fluid actuators in different working modes, Proc. SPIE 3045 (1997) 148-159.
21. J. Bonhaus et al., Diamond heat spreaders for high power devices with integrated temperature sensors, 14th Annual Semiconductor Thermal Measures Management Symposium, San Diego, IEEE, 1998, pp. 139-146.
22. P. Bouchilloux et al., Computer aided modeling of induced strain actuators and other piezoelectric structures, ASME International Mechanical Engineers Congress Exposition, DSC 61, ASME, New York, 1997, pp. 307-312.
23. R. Buchhold et al., Combination of different methods to characterize micromechanical sensors, 1996 MRS Fall Symposium, Vol. 459, Boston, 1997, pp. 243-248.
24. G. Canepa et al, Detection of incipient object slippage by skin-like sensing and neural network processing, IEEE Trans. Systems Man. Cybernet. 28 (3) (1998) 348-356.
25. L. Castaner et al., Design and fabrication of a low cost water flowmeter, International Conference on Solid-State Sensors Actuators, Chicago, IEEE, 1997, pp. 159-162.
26. D.C. Catling, High-sensitivity silicon capacitive sensors for measuring medium-vacuum gas pressures, Sensors Actuators A, Phys. 64 (2) (1998) 157-164.
27. K. Chandrashekhara, P. Donthireddy, Vibration suppression of composite beams with piezoelectric devices using a higher order theory, Eur. J. Mech, A/Solids 16 (4) (1997) 709-721.
28. K. Chandrashekhara, S. Varadarajan, Adaptive shape control of composite beams with piezoelectric actuators, J. Intell. Mater. Systems Struct. 8 (2) (1997) 112-124.
29. L.P. Chao, K.T. Chen, Shape optimal design and force sensitivity evaluation of six-axis force sensors, Sensors Actuators A, Phys. 63 (2) (1997) 105-112.
30. L.P. Chao, C.Y. Yin, Design of a novel six-component wrist force sensor, J. Chinese Soc. Mech. Eng. C 19 (4) (1998) 349-358.
31. A. Chattopadhyay, C.E. Seeley, Higher order theory for modeling composite laminates with induced strain actuators, Composites Part B 28 (3) (1997) 243-252.
32. A. Chattopadhyay et al., Design of a smart flap using polymeric C-block actuators and a hybrid optimization technique, Smart Mater. Struct. 6 (2) (1997) 134-144.
33. C.Y.K. Chee et al., Review on the modelling of piezoelectric sensors and actuators incorporated in intelligent structures, J. Intell. Mater. Systems Struct. 9 (1) (1998) 3-19.
34. C.Q. Chen, Y.P. Shen, Optimal control of active structures with piezoelectric modal sensors and actuators, Smart Mater. Struct. 6 (4) (1997) 403-409.
35. S.H. Chen et al., Active vibration control and suppression for intelligent structures, J. Sound Vib. 200 (2) (1997) 167-177.
36. S.X. Chen et al., High-bandwidth moving-magnet actuator for hard disk drives, IEEE Trans. Magn. 33 (5) (1997) 2632-2634.
37. P. Choudhary, T. Meydan, A novel accelerometer design using the inverse magnetostrictive effect, Sensors Actuators A, Phys. 59 (1/3) (1997) 51-55.
38. F. Claeyssen et al., Actuators, transducers and motors based on giant magnetostrictive materials, J. Alloys Compounds 258 (1/2) (1997) 61-73.
39. J.R. Clowes et al., Pressure sensitivity of side-hole optical fiber sensors, IEEE Photonics Tech. Lett. 10 (6) (1998) 857-859.
40. R.G. Cobb, B.S. Liebst, Sensor placement and structural damage identification from minimal sensor information, AIAA J. 35 (2) (1997) 369-374.
41. A. Cozma, R. Puers, Electrostatic actuation as a self-testing method for silicon pressure sensors, Sensors Actuators A, Phys. 60 (1/3) (1997) 32-36.
42. R. Cragun, L.L. Howell, Constrained thermal expansion micro-actuator, 1998 ASME International Mechanical Engineers Congress Exposition DSC 66, ASME, New York, 1998, pp. 365-371.
43. P. De Fonseca et al., Optimization methods for choosing sensor and actuator locations in an actively controlled double-panel partition, Proc. SPIE 3041 (1997) 124-135.
44. K.P. Dharmasena, H.N.G. Wadley, Eddy current sensor concepts for the Bridgman growth of semiconductors, J. Crystal Growth 172 (3/4) (1997) 303-312.
45. G. Diana et al., Active control of vibrations of a metal panel by means of piezoelectric actuators and sensors, Proc. SPIE 3044 (1997) 327-341.
46. U. Dillner et al., Low power consumption thermal gas-flow sensor based on thermopiles of highly effective thermoelectric materials, Sensors Actuators A, Phys. 60 (1/3) (1997) 1-4.
47. U. Dillner et al., Thermal simulation of a micromachined thermopile-based thin-film gas flow sensor, Microelectron. J. 29 (4/5) (1998) 291-297.
48. A.B. Dobrucki, P. Pruchnicki, Theory of piezoelectric axisymmetric bimorph, Sensors Actuators A, Phys. 58 (3) (1997) 203-212.
49. D. Dragomir-Daescu et al., Dynamics of delaminated composite plates with piezoelectric actuators, 39th Struct., Structural Dynamics and Material Conference Exhibition, Vol. 4, Long Beach, 1998, pp. 2891-2901.
50. M. Emmenegger et al., Simulation of a thermomechanically actuated gas sensor, 11th Annual International Workshop on Micro Electrical Mechanics, Heidelberg, IEEE, New York, 1998, pp. 184-189.
51. S. Fan et al., Finite element modelling and simulation on frequency characteristics of the silicon beam resonator attached to an E-type round diaphragm, Sensors Actuators A, Phys. 63 (3) (1997) 169-176.
52. M. Fischer et al., Electrostatically deflectable polysilicon micromirrors- dynamic behaviour and comparison with the results from FEM modelling, Sensors Actuators A, Phys. 67 (1/3) (1998) 89-95.
53. S.M. Flockhart, R.S. Dhariwal, Reduction of friction in a fluid driven micro-actuator using a stepped bearing plate, J. Micromech. Microeng. 8 (2) (1998) 151-154.
54. R. Foedinger, et al., Structural integrity of filament wound composite structures with embedded fiber optic sensors, 42nd International SAMPE Symposium Exhibition, Vol. 42, 1997, pp. 368-379.
55. R. Foedinger, et al., Structural health monitoring of filament wound composite pressure vessels with embedded optical fiber sensors, 43rd International SAMPE Symposium Exhibition, Vol. 43, 1998, pp. 444-457.
56. W. Folkerts, J.C.S. Kools, Experimental study of the validity of simple design rules for the biasing of spin-valve-type GMR heads, Sensors Actuators A, Phys. 64 (3) (1998) 237-240.
57. E.E. Forster et al., Flutter control of wing boxes using piezoelectric actuators, J. Aircraft 35 (6) (1998) 949-957.
58. H. Fritsch et al., A low-frequency micromechanical resonant vibration sensor for wear monitoring, Sensors Actuators A, Phys. 62 (1/3) (1997) 616-620.
59. R. Frodl, D. Schoedlbauer, Modern concepts for low cost, high performance position sensors, SAE Spec. Publ. Electron. Engine Control 1356 (1998) 87-95.
60. H. Fukunaga et al., Static deformation control of laminated composite plate with piezoelectric actuators, JSME Int. J. Ser. A 41 (2) (1998) 267-273.
61. H. Fusayasu et al., Optimization of a magnetic actuator with Taguchi method and multivariate analysis method, IEEE Trans. Magn. 34 (4) (1998) 2138-2140.
62. U. Gabbert et al., Simultane Optimierung von Aktorposition und Reglerparametern adaptiver Strukturen im Frequenzbereich, ZAMM 78 (S1) (1998) 391-392.
63. R. Gafsi et al., Static stress optical-fiber sensor, Sensors Actuators A, Phys. 62 (1/3) (1997) 501-505.
64. R.X. Gao et al., Miniaturized surface-driven electrostatic actuators: design and performance evaluation, IEEE/ASME Trans. Mechatron. 2 (1) (1997) 1-7.
65. C.K. Ghaddar et al., Simulation and design of electro-thermally actuated MEMS devices. A case study: the AFIT piston micromirror, 1998 ASME International Mechanical Engineers Congress Exposition, DSC 66, ASME, 1998, pp. 293-298.
66. G.L. Ghiringhelli et al., Characterization of anisotropic, non-homogeneous beam sections with embedded piezo-electric materials, J. Intell. Mater. Systems Struct. 8 (10) (1997) 842-858.
67. M.R.J. Gibbs et al., Microstructures containing piezomagnetic elements, Sensors Actuators A, Phys. 59 (1/3) (1997) 229-235.
68. K. Goldman et al., Vertically integrated media-isolated absolute pressure sensor, International Conference on Solid-State Sensors Actuators, Vol. 2, Chicago, 1997, pp. 1501-1504.
69. X. Gong, Z. Suo, Nonlinear finite element method for electrostrictive ceramic multilayer actuators: a comparison of capacitor-type and slit structures, Proceedings of US-Japan Workshop on Smart Materials Structures, 1997, pp. 169-179.
70. S. Goswami, T. Kant, Shape control of intelligent composite stiffened structures using piezoelectric materials-a finite element approach, J. Reinf. Plast. Compos. 17 (5) (1998) 446-461.
71. A. Gotz et al., Thermal and mechanical aspects for designing micromachined low-power gas sensors, J. Micromch. Microeng. 7 (3) (1997) 247-249.
72. A. Gotz et al., Micromachined solid state integrated gas sensor for the detection of aromatic hydrocarbons, Sensors Actuators B, Chem. 44 (1/3) (1997) 483-487.
73. A. Gotz et al., Improvement of pressure sensor performance and process robustness through reinforcement of the membrane edges, Sensors Actuators A, Phys. 67 (1/3) (1998) 138-141.
74. C.G. Haba et al., Optimization of a ferromagnetic displacement sensor, Sensors Actuators A, Phys. 59 (1/3) (1997) 136-141.
75. S.A. Haider et al., 3-D simulation of subsurface PEC sensing for discrimination enhancement using bistatic positional, angular, and polarization diversity, International Geoscience Remote Sensing Symposium, IGARSS, Seattle, IEEE, New York, 1998, pp. 520-523.
76. J.H. Han, I. Lee, Analysis of composite plates with piezoelectric actuators for vibration control using layerwise displacement theory, Composites Part B 29 (5) (1998) 621-632.
77. W. Han, W.L. Cleghorn, Vibration analysis of pre-stressed pressure sensors using finite element method, Finite Elements Anal. Des. 30 (3) (1998) 205-217.
78. S. Hein et al., Capacitive differential pressure sensor with high overload capability using silicon/glass technology, International Conference on Solid-State Sensors Actuators, Vol. 2, Chicago, 1997, pp. 1477-1480.
79. F.W. Hintz, J.P. Bobis, Development of finite element design simulation tool for proximity sensor coils with ferrite cores, IEEE Instruments Measures Technical Conference, Ottawa, 1997, pp. 139-145.
80. M.T. Hol et al., Wind tunnel testing of panel flutter control using piezoelectric actuation and iterative gain tuning, Proc. SPIE 3041 (1997) 564-577.
81. C.H. Hong, I. Chopra, Modeling and validation of induced strain actuation of composite coupled plates, 38th Struct., Structural Dynamics and Materials Conference, Kissimmee, AIAA, 1997, pp. 1599-1606.
82. I.M. Hsing et al., Finite element simulation strategies for microfluidic devices with chemical reactions, International Conference on Solid-State Sensors Actuators, Vol. 2, Chicago, 1997, pp. 1015-1018.
83. C.Y. Hsu et al., Shape control of composite plates by bonded actuators with high performance configuration, J. Reinf. Plast. Compos. 16 (18) (1997) 1692-1710.
84. E.S. Hung et al., Low-order models for fast dynamical simulation of MEMS microstructures, International Conference on Solid-State Sensors Actuators, Vol. 2, Chicago, 1997, pp. 1101-1104.
85. T. Ichihara et al., High performance amorphous thermistor bolometer based on micro-machined structure, International Conference on Solid-State Sensors Actuators, Vol. 2, Chicago, 1997, pp. 1253-1256.
86. J.I. Im et al., Design and evaluation of piezoelectric bimorphs combined with multilayer actuator using FEM, J. Korean Phys. Soc. 32 (Suppl.) (1998) 1251-1253.
87. S. Imai et al., Output characteristics of a thin-film piezoelectric AE sensor for magnetic head-disk interaction, JSME Int. J., Ser. C 40 (1) (1997) 33-41.
88. D. Isobe, Static positioning control method of connected piezoelectric actuators using finite element method, 4th World Congress on Computational Mechanics, Buenos Aires, 1998, pp. 1148.
89. W.M. Isterling, N.D. Samaan, Advanced simulation techniques applied to microengineered eddy current sensor, 14th Australian Microelectronics Conference, Melbourne, IEEE, 1997, pp. 205-210.
90. T. Itoh, G.S. Springer, Strain measurement with microsensors, J. Compos. Mater. 31 (19) (1997) 1944-1984.
91. G. Ji, I. Lasiecka, Partially observed analytic systems with fully unbounded actuators and sensors- FEM algorithms, Comp. Optim. Appl. 11 (2) (1998) 111-136.
92. R.T. Jones et al., Determination of cantilever plate shapes using wavelength division multiplexed fiber Bragg grating sensors and a least-square strain-fitting, Smart Mater. Struct. 7 (2) (1998) 178-188.
93. U.G. Jonsson, O. Andersson, Investigations of the low- and high-frequency response of 3Omega sensors used in dynamic heat capacity measurements, Meas. Sci. Tech. 9 (11) (1998) 1873-1885.
94. K.S. Kannan, A. Dasgupta, A nonlinear Galerkin finite element theory for modeling magnetostrictive smart structures, Smart Mater. Struct. 6 (3) (1997) 341-350.
95. G. Kawiecki, Finite element study of open-section beams actuated by skewed piezoelements, Smart Mater. Struct. 7 (1) (1998) 85-94.
96. S.H. Khan et al., Investigation of the effects of design parameters on output characteristics of capacitive angular displacement sensors by finite element modeling, IEEE Trans. Magn. 33 (2) (1997) 2081-2084.
97. H.B. Kim, Y.S. Park, Sensor placement guide for structural joint stiffness model improvement, Mech. Systems Signal Process. 11 (5) (1997) 651-672.
98. J. Kim et al., Finite element modelling of structures including piezoelectric active devices, Int. J. Numer Methods Eng. 40 (5) (1997) 817-832.
99. S.J. Kim, K. Y. Song, Active control of sound fields from plates in flow by piezoelectric sensor/actuator, 39th Struct., Structural Dynamics and Materials Conference Exhibition, Vol. 1, Long Beach, 1998, pp. 856-866.
100. M. Koch, Novel micropump design with thick-film piezoelectric actuation, Meas. Sci. Tech. 8 (1) (1997) 49-57.
101. M. Kohli et al., Pyroelectric thin-film sensor array, 10th Eurosensors Conference, Leuven, 1997, pp. 147-153.
102. S. Konishi et al., Measurements and analysis on characteristics of a conveyance system using air levitation, Sixth International Conference on Emergency Technical Factory Automation, Los Angeles, IEEE, New York, 1997, pp. 232-236.
103. H. Krassow et al., Novel packaging technique and its application to a WET/WET differential pressure silicon sensor, International Confrence on Solid-State Sensors Actuators, Chicago, IEEE, New York, 1997, pp. 275-278.
104. H. Krassow et al., Photolitographic packaging of silicon pressure sensors, Sensors Actuators A, Phys. 66 (1/3) (1998) 279-283.
105. F. Lalande et al., Impedance-based modelling of induced strain actuators bonded on ring structures, J. Sound Vib. 201 (2) (1997) 169-187.
106. G. Lallement et al., Optimal sensor deployment: application to model updating, J. Vib. Control 4 (1) (1998) 29-46.
107. S. Lanyi, Analysis of linearity errors of inverse capacitance position sensors, Meas. Sci. Tech. 9 (10) (1998) 1757-1764.
108. J.B. Layton, Multiobjective control design including performance robustness for gust alleviation of a wing with adaptive material actuators, Proc. SPIE 3039 (1997) 373-381.
109. R. LeLetty et al., New amplified piezoelectric actuator for precision positioning and active damping, Proc. SPIE 3041 (1997) 496-504.
110. H.J. Lee, D.A. Saravanos, Thermal shape control of active and sensory piezoelectric composite plates, ASME International Mechanical Engineers Congress Exposition, AD 55, ASME, New York, 1997, pp. 249-257.
111. R.Y.Y. Lee et al., Fuzzy logic control for nonlinear free vibration of composite plates with piezoactuators, 39th Struct., Structural Dynamics and Materials Conference Exhibition, Vol. 1, Long Beach, 1998, pp. 867-875.
112. T.J. Leeks, T.A. Weisshaar, Discrete grid actuator stiffened panels for aeroelastic use, Proc. SPIE 3041 (1997) 554-563.
113. A.E.U. Lees, The analysis and visualization of metal microstructures, Adv. Eng. Software 28 (9) (1997) 573-580.
114. V. Lemarquand, New bi-directional inductive force sensor, IEEE Trans. Magn. 34 (4) (1998) 1333-1335.
115. B. Lequesne, T. Schroeder, High accuracy magnetic position encoder concept, 1998 IEEE Industry Applications Conference, St Louis, IEEE, New York, 1998, pp. 187-196.
116. K. Levin, R. Jarlas, Vulnerability of embedded EFPI-sensors to low-energy impacts, Smart Mater. Struct. 6 (3) (1997) 369-382.
117. G. Li et al., Stress-enhanced displacements in PLZT rainbow actuators, J. Amer. Ceram. Soc. 80 (6) (1997) 1382-1388.
118. Y.H. Lim et al., Finite element modeling of the transient response of MEMS sensors, Smart Mater. Struct. 6 (1) (1997) 53-61.
119. Y.H. Lim et al., Closed loop finite element modeling of active structural damping in the frequency domain, Smart Mater. Struct. 6 (2) (1997) 161-168.
120. L. Lin et al., Micro strain gauge with mechanical amplifier, J. Microelectromech. Systems 6 (4) (1997) 313-321.
121. Y.H. Lin, Y.K. Tsai, Non-linear active vibration control of a cantilever pipe conveying fluid, J. Sound Vib. 202 (4) (1997) 477-490.
122. X. Liu et al., Genetic approach to optimal topology/controller design of adaptive structures, Int. J. Numer. Methods Eng. 41 (5) (1998) 815-830.
123. X.J. Liu et al., Optimal topology-actuator placement design of structures using SA, J. Aerospace Eng. 10 (3) (1997) 119-125.
124. V. Lysenko et al., Oxidized porous silicon: a new approach in support thermal isolation of thermopile-based biosensors, Sensors Actuators A, Phys. 67 (1/3) (1998) 205-210.
125. R. Maeda et al., Development of a micromirror using piezoelectric excited and actuated structures, 1996 MRS Fall Meeting Vol. 444, Boston, 1997, pp. 233-238.
126. T. Maeno et al., Relationship between the structure of human finger tissue and the location of tactile receptors, JSME Int. J. Ser. C 41 (1) (1998) 94-100.
127. T. Maeno et al., Analysis and design of a tactile sensor detecting strain distribution inside an elastic finger, 1998 IEEE/RSJ International Conference on Intelligent Robots, Victoria, Canada, 1998, pp. 1658-1663.
128. S. Magne et al., State-of-strain evaluation with fiber Bragg grating rosettes: application to discrimination between strain and temperature effects in fiber sensors, Appl. Opt. 36 (36) (1997) 9437-9447.
129. A.V. Mamishev et al., Parameter estimation using an interdigital dielectrometry sensor with finite element software, Annual Conference on Electrical Insulation Dielectrical Phenomena, Minneapolis, IEEE, New York, 1997. pp. 234-237.
130. C. Marxer et al., Reliability considerations for electrostatic polysilicon actuators using as an example the REMO component, Sensors Actuators A, Phys. 61 (1/3) (1997) 449-454.
131. B.P. Masters, E.F. Crawley, Evolutionary design of controlled structures, J. Aircraft 36 (1) (1999) 209-217.
132. 3 pyroelectric microsensor fabricated by sandblasting technique, 11th Annual International Workshop on Micro Electrical Mechanics, Heidelberg, IEEE, New York 1998. pp. 296-300.
133. A. Meckes et al., Electromagnetically driven microvalve fabricated in silicon, International Conference on Solid-State Sensors Actuators, Vol. 2, Chicago, 1997, pp. 821-824.
134. U. Mescheder, S. Majer, Micromechanical inclinometer, Sensors Actuators A, Phys. 60 (1/3) (1997) 134-138.
135. Y. Mitsutake et al., Dynamic response analysis of a linear solenoid actuator, IEEE Trans. Magn. 33 (2) (1997) 1634-1637.
136. J.W. Mrosk et al., SAW sensors for high temperature applications, 24th Annual Conference on IEEE Industrial Electronics Society, Vol. 4, Aachen, 1998, pp. 2386-2390.
137. O. Nagler et al., Efficient design and optimization of MEMS by integrating commercial simulation tools, Sensors Actuators A, Phys. 66 (1/3) (1998) 15-20.
138. E. Nakamoto et al., Electromagnetic and structural coupled finite element analysis of active control in an anti-vibration device, IEEE Trans. Magn. 33 (2) (1997) 1666-1669.
139. Y. Negoro et al., Sensitivity analysis of structure in GMR/insulator/SAL sensor, IEEE Trans. Magn. 33 (2) (1997) 2167-2170.
140. M. Nirei et al., Torque form design of laser scanning actuator based on statistical method, IEEE Trans. Magn. 33 (5) (1997) 4242-4244.
141. M. Niu et al., Design and characteristics of two-gimbals micro-gyroscope fabricated with quasi-LIGA process, International Conference on Solid-State Sensors Actuators, Vol. 2, Chicago, 1997, pp. 891-894.
142. D.C.D. Oguamanam et al., Stress stiffening effects in laminated beams with piezoelectric actuators, J. Intell. Mater. Systems Struct. 9 (2) (1998) 137-145.
143. Y. Omura et al., New resonant accelerometer based on rigidity change, International Conference on Solid-State Sensors Actuators, Vol. 2, Chicago, 1997, pp. 855-858.
144. S. Otake et al., Automotive high pressure sensor, SAE Spec. Publ. 1312 (1998) 61-68.
145. H. Panossian et al., Balanced shaker and sensor placement for modal testing of large flexible structures, 16th International Modal Analysis Conference, Santa Barbara, 1998, pp. 829-839.
146. H. Panossian et al., Balanced shaker and sensor placement for modal testing of large flexible structures, J. Chinese Soc. Mech. Eng. 19 (1) (1998) 103-113.
147. S.B. Park, G.P. Carman, Tailoring the properties of piezoelectric ceramics: analytical, Int. J. Solids Struct. 34 (26) (1997) 3385-3399.
148. I. Pavelescu et al., Analysis and modelling of a silicon micromachined Mach-Zehnder interferometer for pressure sensing, J. Micromech. Microeng. 7 (3) (1997) 214-217.
149. G. Percin et al., Micromachined 2-D array piezoelectrically actuated flextensional transducers, IEEE Ultrasonics Symposium, Vol. 2, Toronto, IEEE, New York, 1997, pp. 959-962.
150. M. Piron et al., Rapid computer-aided design method for fast-acting solenoid actuators, 1998 IEEE Industry Applications Conference, St Louis, IEEE, New York, 1998, pp. 197-204.
151. J.A. Plaza et al., New bulk accelerometer for triaxial detection, Sensors Actuators A, Phys. 66 (1/3) (1998) 105-108.
152. B. Pletner, H. Abramovich, Consistent methodology for the modeling of piezolaminated shells, AIAA J. 35 (8) (1997) 1316-1326.
153. S. Poser et al., Chip elements for fast thermocycling, Sensors Actuators A, Phys. 62 (1/3) (1997) 672-675.
154. L. Prevond et al., Predetermination method of electromagnetic characteristics of centralized coil flux switching machine. Application to a linear actuator, J. Phys. III 7 (6) (1997) 1307-1330.
155. O.K. Rediniotis et al., Theoretical and experimental investigations of an active hydrofoil with SMA actuators, Proc. SPIE 3039 (1997) 277-289.
156. T. Reininger, C. Hanisch, Magnetic field sensors for the industrial automation, Sensors Actuators A, Phys. 59 (1/3) (1997) 177-182.
157. L.A. Renforth et al., Design optimisation of a permanent magnet actuator using an operation simulation model, UPEC'97, Manchester, 1997, pp. 922-925.
158. G.M. Robinson, Finite element modeling of load cell hysteresis, measurement, J. Int. Meas. Confeder. 20(2) (1997) 103-107.
159. M. Rohde, A. Schussler, On the response time behaviour of laser micromachined NiTi shape memory actuators, Sensors Actuators A, Phys. 61 (1/3) (1997) 463-468.
160. B. Romanowicz et al., Simulation of integrated electromagnetic device systems, International Conference on Solid-State Sensors Actuators, Vol. 2, Chicago, 1997, pp. 1051-1054.
161. S. Roy et al., Miniature ice detection sensor system for aerospace applications, 11th Annual International Workshop on Micro Electrical Mechanics, Heidelberg, IEEE, New York, 1998, pp. 75-80.
162. H. Ryoo et al., Design and fabrication of a dual-axial gyroscope with piezoelectric ceramics, Sensors Actuators A, Phys. 65 (1) (1998) 54-60.
163. J.K. Ryou et al., Electrode pattern design of piezoelectric sensors and actuators by genetic algorithm, 38th Struct., Structural Dynamics and Materials Conference, Kissimmee, AIAA, 1997, pp. 1747-1754.
164. J.K. Ryou et al., Design of piezoelectric sensors and actuators using positioning, sizing, and electrode shading, Proc. SPIE 3039 (1997) 747-753.
165. J.K. Ryou, Electrode pattern design of piezoelectric sensors and actuators using genetic algorithms, AIAA J. 36 (2) (1998) 227-233.
166. T. Sakano et al., Study on a micro piezoelectric linear actuator with friction drive method-force characteristics of grip type linear actuator, J. Jpn. Soc. Precis. Eng. 63 (9) (1997) 1246-1250.
167. V.D. Samper, A.J. Sangster, Coupled mechanical and electrostatic microactuator analysis, IEE Coll. Comp. Model. Tech. Microstr., No 077, 1997, pp. 1-3.
168. P. Santini et al., A comparative overview of strain actuated surfaces' design, J. Reinf. Plast. Compos. 16 (6) (1997) 519-536.
169. D.A. Saravanos, Mixed laminate theory and finite element for smart piezoelectric composite shell structures, AIAA J. 35 (8) (1997) 1327-1333.
170. D.A. Saravanos et al., Layerwise mechanics and finite element for the dynamic analysis of piezoelectric composite plate, Int. J. Solids Struct. 34 (3) (1997) 359-378.
171. F. Schilling et al., Simulation of thermally induced package effects with regard to piezoresistive pressure sensors, Sensors Actuators A, Phys. 60 (1/3) (1997) 37-39.
172. W. Seemann et al., Bonding stresses between piezoelectric actuators and elastic beams, Proc. SPIE 3041 (1997) 665-675.
173. P. Seshu, N.G. Naganathan, Finite element analysis of strain transfer in an induced strain actuator, Smart Mater. Struct. 6 (1) (1997) 76-88.
174. H. Shimada et al., Electric field analysis for a static induction type of voltage sensor in three-phase power distribution systems, IEE Proc. C-Gener. Trans. Distr. 145 (4) (1998) 437-443.
175. M. Shimojo, Mechanical filtering effect of elastic cover for tactile sensor, IEEE Trans. Robot. Automat. 13 (1) (1997) 128-132.
176. H. Shinno, H. Hashizume, In-process monitoring method for machining environment based on simultaneous multiphenomena sensing, Ann. CIRP 46 (1) (1997) 53-56.
177. C.P. Smyser, K. Chandrashekhara, Robust vibration control of composite beams using piezoelectric devices and neural networks, Smart Mater. Struct. 6 (2) (1997) 178-189.
178. K. Srairi et al., Numerical and experimental studies of a linear electromagnetic actuator supplied by capacitor discharge voltages, IEEE Trans. Magn. 33 (2) (1997) 2061-2064.
179. L. Steffensen et al., Modular environment for the design of micromachined silicon devices, International Conference on Solid-State Sensors Actuators, Vol. 2, Chicago, 1997, pp. 1023-1026.
180. V. Stoikov et al., 3D design optimisation of electromagnetic low-voltage linear actuators based on FE force computation, COMPEL 17 (1/3) (1998) 166-170.
181. A. Suleman, M.A. Goncalves, Optimization issues in application of piezoelectric actuators in panel flutter control, Proc. SPIE 3039 (1997) 335-347.
182. M. Sunar, S.S. Rao, Thermopiezoelectric control design and actuator placement, AIAA J. 35 (3) (1997) 534-539.
183. M. Sunar, S.S. Rao, Recent advances in sensing and control of flexible structures via piezoelectric materials technology, Appl. Mech. Rev. 52 (1) (1999) 1-16.
184. M. Sunar et al., Robust design of thermopiezoelectric actuators, J. Guid. Control Dyn. 21 (3) (1998) 521-523.
185. K. Suzumori et al., Fiberless flexible microactuator designed by finite element method, IEEE/ASME Trans. Mechatron. 2 (4) (1997) 281-286.
186. Y. Takano et al., Thrust simulation of a linear oscillatory actuator, IEEE Trans. Magn. 33 (2) (1997) 2085-2088.
187. N. Takeda, T. Kosaka, Application of modal domain distributed fiber optic sensors to smart materials and structures, Proc. SPIE 3041 (1997) 635-643.
188. C.C. Tan, C.I. Hird, Active control of the sound field of a constrained panel by an electromagnetic actuator- an experimental study, Appl. Acoust. 52 (1) (1997) 31-51.
189. K. Tanaka et al., Fishbone architecture: an equivalent mechanical model of cochlea and its application to sensors and actuators, First IEEE/ASME International Conference on Advances Intelligent Mechanics, Tokyo, 1997, pp. 61.
190. K. Tanaka et al., Novel mechanical cochlea fishbone with dual sensor/actuator characteristics, IEEE/ASME Trans. Mechatron. 3 (2) (1998) 98-105.
191. X. Tao, S. Xia, Novel cathode-on-film VME pressure sensor, IEEE International Vacuum Microelectronics Conference, Asheville, NC, 1998, pp. 150-151.
192. Z.J. Tao et al., Modelling and experimental investigation of a sensor-integrated workpiece fixture system, Int. J. Comp. Appl. Technol. 10 (3/4) (1997) 236-250.
193. W.P. Taylor et al., Fully integrated magnetically actuated micromachined relays, J. Microelectromech. Systems 7 (2) (1998) 181-191.
194. S.P. Thompson, J. Loughlan, Adaptive post-buckling response of carbon fibre composite plates employing SMA actuators, Compo. Struct. 38 (1/4) (1997) 667-678.
195. J. Tollefsen, E.A. Hammer, Capacitance sensor design for reducing errors in phase concentration measurements, Flow Meas. Instrum. 9 (1) (1998) 25-32.
196. Y Tsuchida et al., Development of a moving magnetic flux type sensor using shading coils for ECT, IEEE Trans. Magn. 34 (4) (1998) 1309-1311.
197. V.V. Varadan et al., Modeling of piezoelectric sensor fidelity, IEEE Trans. Ultrason. Ferroelectr. 44 (3) (1997) 538-547.
198. V.V. Varadan et al., Optimal placement of piezoelectric actuators for active noise control, AIAA J. 35 (3) (1997) 526-533.
199. V.V. Varadan et al., Eigenmode approach for a periodic composite transducer subject to fluid loading, J. Vib. Acoust., ASME 120 (2) (1998) 313-323.
200. P. Voigt et al., Electrofluidic full-system modelling of a flap valve micropump based on Kirchhoffian network theory, Sensors Actuators A, Phys. 66 (1/3) (1998) 9-14.
201. H.N.G. Wadley, K.P. Dharmasena, Methods for liquid-solid interface shape and location discrimination during eddy current sensing of Bridgman growth, J. Crystal Growth 172 (3/4) (1997) 313-322.
202. G. Wang, M. Shahinpoor, Design, prototyping and computer simulations of a novel large bending actuator made with a shape memory alloy contractile wire, Smart Mater. Struct. 6 (2) (1997) 214-221.
203. Q. Wang, W.H. Ko, Si-to-Si fusion bonded touch mode capacitive pressure sensors, Mechatronics 8 (5) (1998) 467-484.
204. Z. Wang et al., The static shape control for intelligent structures, Finite Elements Anal. Des. 26 (4) (1997) 303-314.
205. U. Wende et al., Planar fluxgate sensors: experimental data and theoretical analysis, Sensors Actuators A, Phys. 61 (1/3) (1997) 273-278.
206. G.P. Widdowson et al., Design optimization of a limited angle voice coil actuator for use in a wire bonding application, Second International Conference on Power Electronic Drive Systems, Singapore, IEEE, New York, 1997, pp. 413-417.
207. B. Willing et al., Pyroelectric thin film sensor arrays integrated on silicon, Ferroelectrics 201 (1/4) (1997) 147-156.
208. D.T.W. Wong et al., Thermal modeling of micro-hotplates for integrated sensor applications, IEEE Hong Kong Electrical Devices Meeting, IEEE, New York, 1997, pp. 149-152.
209. J.Z. Wu et al., Effects of inserting a pressensor film into articular joints on the actual contact mechanics, J Biomech. Eng., ASME 120 (5) (1998) 655-659.
210. Z. Xiao et al., Diaphragm deflection of silicon interferometer structures used as pressure sensors, Sensors Actuators A, Phys. 61 (1/3) (1997) 99-107.
211. K. Xu, A.K. Noor, Predictor-corrector finite element approach for electroelastic analysis of hybrid composite plates, Comput. Methods Appl. Mech. Eng. 147 (1/2) (1997) 139-145.
212. H. Yan et al., Fast calculation of sensitivity distributions in capacitance tomography sensors, Electron. Lett. 34 (20) (1998) 1936-1937.
213. J.S. Yang, Analysis of ceramic thickness shear piezoelectric gyroscopes, J. Acoust. Soc. Am. 102 (6) (1997) 3542-3548.
214. L.J. Yang et al., Application of V-groove slot-array method to the piezoresistive pressure sensors, Trans. Chinese Inst. Eng. Ser. A 20 (3) (1997) 335-341.
215. G.G. Yaralioglu et al., Analysis and design of an interdigital cantilever as a displacement sensor, J. Appl. Phys. 83 (12) (1998) 7405-7415.
216. L. Yin, Y. Shen, Strain sensing of composite plates subjected to low velocity impact with distributed piezoelectric sensors: a mixed finite element approach, J. Sound Vib. 199 (1) (1997) 17-31.
217. K.W. Yoon et al., Application of distributed PVDF actuators to the control of sound transmission through composite plate, Proc. SPIE 3041 (1997) 846-855.
218. S.B. Yoon et al., Dynamic analysis of a reciprocating linear actuator for gas compression using finite element method, IEEE Trans. Magn. 33 (5) (1997) 4113-4115.
219. S.B. Yoon et al., Shape optimization of solenoid actuator using the finite element method and numerical optimization technique, IEEE Trans. Magn. 33 (5) (1997) 4140-4142.
220. A. Yoshitake et al., Dynamic analysis of a linear oscillatory actuator under feedback control, IEEE Trans. Magn. 33 (2) (1997) 1662-1665.
221. J.D. Yu, Second-order analysis of free vibrations of piezoelectric ceramic actuators, IEEE Internatioal Frequency Control Symposium, Pasadena, IEEE, New York, 1998, pp. 695-702.
222. Y. Yu, R. Xia, Study on finite element analysis and shape control of composite laminate containing piezoelectric actuator/sensor, Acta Mater. Compos. Sin. 14 (2) (1997) 114-119.
223. S. Zappe et al., Electrostatically driven linear micro-actuators: FE analysis and fabrication, J. Micromech. Microeng. 7 (3) (1997) 204-209.
224. P.Q. Zhang et al., Analytical and experimental modal analysis for operational validation and calibration of a miniature silicon sensor, J. Sound Vib. 214 (5) (1998) 903-913.
225. Z. Zhu, B. Zhang, A linear piezomotor integrated by a monolithic flexural frame, J. Mech. Design, ASME 119 (3) (1997) 414-417.
226. R. Ziermann et al., High temperature pressure sensor with Beta-SiC piezoresistors on SOI substrates, International Conference on Solid-State Sensors Actuators, Vol. 2, Chicago, 1997, pp. 1411-1414. Finite element method: Other papers, reviews and books
227. L.C. Chin, Finite element modeling of the sensor/actuator function of composite piezoelectric transducers under fluid loading, Ph.D. Thesis, Pennsylvania State University, 1992.
228. P. Ciampolini et al., A CAD environment for the numerical simulation of integrated piezoresistive transducers, Sensors Actuators A 47 (1995) 618-622.
229. D.T. Detwiler et al., Finite element analysis of laminated composite structures containing distributed piezoelectric actuators and sensors, Finite Elements Anal. Des. 20 (1995) 87-100.
230. W.S. Hwang, H.C. Park, Finite element modeling of piezoelectric sensors and actuators, AIAA J. 31 (1993) 930-938.
231. J. Mackerle, Smart materials and structures- a finite-element approach: a bibliography (1986-1997), Modell. Simul. Mater. Sci. Eng. 6 (1998) 293-334.
232. S.S. Rao, M. Sunar, Piezoelectricity and its use in disturbance sensing and control of flexible structures: a survey, Appl. Mech. Rev. 47 (1994) 113-123.
233. T.M. De Swiet, RF sensor for logging-while-drilling geophysical measurements- summary, J. Electromag. Wave Appl. 11 (10) (1997) 1385-1387.
234. M.E. Ghourab, H.I. Anis, Electric stresses in three-core cables equipped with optical fiber sensors, IEEE Trans. Dielectr. Electr. Insul. 5 (4) (1998) 589-595.
235. S.J. Kim, K.Y. Song, Active control of sound fields from plates in flow by piezoelectric sensor/actuator, 39th Struct., Structural Dynamics and Materials Conference Exhibition, Long Beach, AIAA, 1998, pp. 856-866.
236. S.J. Kim, K.W. Yoon, Active control of sound fields from a composite plate using the anisotropy and shape of distributed PVDF actuators, J. Sound Vib. 202 (4) (1997) 461-476.
237. J.B. Lee et al., Optimization and fabrication of a dual thermopile sensor based on the BEM, Sensors Actuators A, Phys. 64 (2) (1998) 179-184.
238. C. Rebizant, R. Smith, Using CAE software to build a new position sensor, Sensors 15 (3) (1998) 10-15.
239. B.D. Semeraro, L.J. Gray, PVM implementation of the symmetric-Galerkin method, Eng. Anal. Boundary Elements 19 (1) (1997) 67-72.
240. H. Shimada et al., Electric field analysis for a static induction type of voltage sensor in three-phase power distribution systems, IEE Proc. C-Gener. Trans. Distr. 145 (4) (1998) 437-443.
241. T. Shimada et al., Active control of sound within enclosure using piezoelectric actuators, Trans. Jpn. Soc. Mech. Eng., Ser. C 63 (609) (1997) 1603-1609.
242. K.W. Yoon et al., Application of distributed PVDF actuators to the control of sound transmission through composite plate, Proc. SPIE 3041 (1997) 846-855.
243. K.W. Yoon et al., Active control of sound fields in plate-cavity system by anisotropic piezoelectric polymers, 38th Struct., Structural Dynamics and Materials Conference, Kissimmee, AIAA, 1997, pp. 1654-1660.
244. K. Amaya et al., BEM analysis of eddy current thickness sensor, BEM XVIII, Braga, CMP, 1996, pp. 141-150.
245. M. Enokizono, S. Nagata, Simulation analysis of magnetic sensor for nondestructive testing by boundary element method, IEEE Trans. Magn. 26 (2) (1990) 877-880.
246. R. Lerch, CAE tools for piezoelectric sensors, Int. J. Comp. Appl. Technol. 5 (2/4) (1992) 191-198.
247. V.V. Varadan, V.K. Varadan, Smart structures-modeling and applications, 1992 Ultrasonics Symposium, Tucson IEEE, 1992, New York, pp. 833-841.