Manufacturing and measurement of freeform optics

CIRP Annals - Manufacturing Technology

Volumn 62, Issue 2, 2013, Pages 823-846

  Fang, F Z ^a   Zhang, X D ^a   Weckenmann, A ^b   Zhang, G X ^a   Evans, C ^c  

^a TIANJIN UNIVERSITY   (China)

^b UNIVERSITY OF ERLANGEN NUREMBERG   (Germany)

^c UNIVERSITY OF NORTH CAROLINA AT CHARLOTTE   (United States)

Author keywords

Freeform optics; Manufacturing; Measurement

Indexed keywords

APPLICATION STATUS; FREEFORM OPTICS; INTEGRATED TECHNOLOGIES; MODERN OPTICS; NEW ENERGIES; OPTICAL PERFORMANCE; PAPER SURVEYS; SYSTEM INTEGRATION;

BIOMEDICAL ENGINEERING; MANUFACTURE; MEASUREMENTS; OPTICAL DESIGN;

OPTICS;

EID: 84883209644     PISSN: 00078506     EISSN: 17260604     Source Type: Journal    
DOI: 10.1016/j.cirp.2013.05.003     Document Type: Article

References (260)

1. J.L. Álvarez, M. Hernández, P. Benítez, and J.C. Miñano TIR-R Concentrator: A New Compact High-gain SMS Design Proceedings of the SPIE 4446 2001 32 40
2. D. Anderson, and J. Burge Optical Fabrication, Chapter 28 in Handbook of Optical Engineering 2001 CRC Press
3. ANSI/ISO/IEC 17025(E) General requirements for the competence of testing and calibration laboratories.
4. ASME B.89.7.5-2006, Metrological Traceability of Dimensional Measurements to the SI Unit of length http://www.bipm.org/en/publications/mep.html, (accessed 01.29.13).
5. ASMEB46.1 (1995), Surface texture (surface roughness, waviness and lay), 1-98.
6. E. Atad-Ettedgui, T. Peacock, D. Montgomery, and D. Gostick Opto-mechanical Design of SCUBA-2 Proceedings of the SPIE 6273 2006 62732H
7. F.G. Balzer, T. Hausotte, N. Dorozhovets, E. Manske, and G. Jäger Tactile 3D Microprobe System with Exchangeable Styli MST 22 id 094018 2011
8. S. Bäumer Handbook of Plastic Optics 2005 Wiley-VCH Verlag GmbH & Co. KgaA
9. A.A. Belousov, L.L. Doskolovich, and S.I. Kharitonov A Gradient Method of Designing Optical Elements for Forming a Specified Irradiance on a Curved Surface Journal of Optical Technology 75 3 2008 161 165
10. P. Benítez, and J.C. Miñano The Future of Illumination Design Optics and Photonics News 18 5 2007 20 25
11. P. Benítez, J.C. Miñano, J. Blen, and R. Mohedano Simultaneous Multiple Surface Optical Design Method in Three Dimensions Optical Engineering 43 2004 1489 1502
12. P. Benitez, J.C. Miñano, J. Blen, and R. Mohedano SMS Design Method in 3D Geometry: Examples and Applications Proceedings of the SPIE 5185 2004 10.1117/12.506857
13. P.J. Besl, and H.D. Mckay A Method for Registration of 3-D Shapes IEEE Transactions on Pattern Analysis and Machine Interlligence 14 2 1992 239 256
14. G. Binnig, H. Rohrer, C. Gerber, and E. Weibel Surface Studies by Scanning Tunneling Microscopy Physical Review Letters 49 1 1982 57 61
15. F. Blateyron New 3D Parameters and Filtration Techniques for Surface Metrology Technology Report of Digital Surf 2006 www.digitalsurf.fr/en/index. html
16. T. Bothe, W. Li, C. Kopylow, and W.P.O. Juptner High-resolution 3D Shape Measurement on Specular Surfaces by Fringe Reflection Proceedings of the SPIE 5457 2004 411 422
17. J.E. Bradby In situ Electrical Characterization of Phase Transformations in Si During Indentation Physical Review B 67 2003 085205
18. C. Brecher, S. Lange, M. Merz, and F. Niehaus NURBS Based Ultra-precision Free-form Machining CIRP Annals - Manufacturing Technology 55 1 2006 547 550
19. E. Brinksmeier, L. Autschbach, M. Weck, and M. Winterschladen Closed Loop Manufacturing of Optical Molds Using an Integrated Simulation Interface Proceedings of 4th euspen International Conference Glasgow, Scotland 2004 215 217
20. E. Brinksmeier, R. Gläbe, and C. Flucke Manufacturing of Molds for Replication of Micro Cube Corner Retroreflectors Production Engineering 2 1 2008 33 38
21. E. Brinksmeier, Y. Mutlugünes, F. Klocke, J.C. Aurich, P. Shore, and H. Ohmori Ultra-precision Grinding CIRP Annals - Manufacturing Technology 59 2 2010 652 771
22. E. Brinksmeier, and O. Riemer Submicron Functional Surfaces Generated by Diamond Machining CIRP Annals - Manufacturing Technology 59 1 2010 535 538
23. E. Brinksmeier, O. Riemer, A. Gessenharter, and L. Autschbach Polishing of Structured Molds CIRP Annals - Manufacturing Technology 53 1 2004 247 250
24. E. Brinksmeier, O. Riemer, and J. Osmer Tool Path Generation for Ultra-precision Machining of Free-form Surface Production Engineering 2 3 2008 241 246
25. A. Brückner, J. Duparré, R. Leitel, and P. Dannberg Thin Wafer-level Camera Lenses Inspired by Insect Compound Eyes Optics Express 18 2010 24379 24394
26. Bryan, J.B., 2006, System and method for forming a non-rotationally symmetric portion of a workpiece, US Patent 7089835 B2.
27. J.H. Burge, and J.C. Wyant Use of Computer Generated Holograms for Testing Aspheric Optics Proceedings of the SPIE 5494 2004 45 50
28. O. Cakmakci, B. Moore, H. Foroosh, and J.P. Rolland Optimal Local Shape Description for Rotationally Non-symmetric Optical Surface Design and Analysis Optics Express 16 3 2008 1583 1589
29. O. Cakmakci, S. Vo, K.P. Thompson, and Rolland JP Application of Radial Basis Functions to Shape Description in a Dual-element Off-axis Eyewear Display: Field-of-view Limit Journal of the Society for Information Display 16 11 2008 1089 1098
30. G. Chapman Ultra-precision machining systems; an enabling technology for perfect surfaces Moore Nanotechnology Systems 2004 http://www.nanotechsys.com/ technology/technical-papers/
31. W.K. Chen, T. Kuriyagawa, H. Huang, and N. Yosihara Machining of Micro Aspherical Mould Inserts Precision Engineering 29 2005 315 323
32. D.W. Cheng, Y.T. Wang, H. Hua, and Talha MM Dedsign of an Optical See-through Head-mounted Display with a Low f-number and Large Field of View Using a Freeform Prism Applied Optics 48 14 2009 2655 2668
33. Y. Cheng, W. Hsu, Y. Chen, and G. Su Design and Fabrication of Free-form Shaped Lens for Laser Leveler Instrument OSA Technical Digest (CD) 2010 FThX2
34. C.F. Cheung, L.B. Kong, and M.J. Ren Measurement and Characterization of Ultra-precision Freeform Surfaces Using an Intrinsic Surface Feature-based Method Measurement Science and Technology 21 2010 115109
35. N.E. Clayor, D.M. Combs, O.M. Lechuga, and J.J. Mader An Overview of Freeform Optics Production Proceedings of the SPIE 5494 2004
36. N.E. Clayor, D.M. Combs, O.M. Lechuga, J.J. Mader, and J. Udayasankaran An Overview of Freeform Optics Production Proceedings of the SPIE 5494 2004
37. Y.F. Dai, C.L. Guan, and Z.Q. Yin Tool Decentration Effect in Slow Tool Servo Diamond Turning Off-axis Conic Aspheric Surface Proceedings of the SPIE 7655 2010
38. P. Dannberg, G. Mann, L. Wagner, and A. Brauer Polymer UV-moulding for Micro-optical Systems and O/E-integration Micromachine Technology for Micro-optics Proceedings SPIE 4179 2000 137 145
39. H.U. Danzebrink, L. Koenders, G. Wilkening, A. Yacoot, and H. Kunzmann Advances in Scanning Force Microscopy for Dimensional Metrology CIRP Annals - Manufacturing Technology 55 2 2006 841 879
40. E. Davis, and J.W. Roblee Comparison of Freeform Manufacturing Techniques in the Production of Monolithic Lens Arrays Proceedings of the SPIE 7426 2009 742605 742611
41. G.E. Davis, J.W. Roblee, S.M. Omecinski, and Hedges A Comparison of Linear Z-axis and Rotational B-axis Freeform Diamond Turning in International Optical Design Conference and Optical Fabrication and Testing OSA Technical Digest (CD) 2010 OTuD1 10.1364/OFT.2010.OTuD1
42. L. De Chiffre, H. Kunzmann, G. Peggs, and D.A. Lucca Surfaces in Precision Engineering, Microengineering and Nanotechnology CIRP Annals - Manufacturing Technology 52 2 2003 561 577
43. Y. Ding, X. Liu, Z.R. Zheng, and P.F. Gu Freeform LED Lens for Uniform Illumination Optics Express 16 17 2008 12958 12966
44. R.L. Donker, I. Widdershoven, and H.A.M. Spaan ISARA 400: Enabling Ultra-precision Coordinate Metrology for Large Parts Proceedings of the 10th International Euspen Conference 2010
45. B. Dörband, and G. Seitz Interferometric Testing of Optical Surfaces at its Current Limit Optik 112 9 2001 392 398
46. E.R. Dowski, and W.T. Cathey Extended Depth of Field Through Wave-front Coding Applied Optics 34 11 1995 1859 1866
47. P.R. Dumas, J. Fleig, G.W. Forbes, and D. Golini Flexible Polishing and Metrology Solutions for Free-form Optics Proceedings of the SPIE 5494 2004 39 44
48. J.W. Duparré, and F.C. Wippermann Micro-optical Artificial Compound Eyes Bioinspiration & Biomimetics 1 2006 R1 R16
49. A.T. Elfizy, G.M. Bone, and M.A. Elbestawi Design and Control of a Dual-stage Feed Drive International Journal of Machine Tools & Manufacture 45 2 2005 153 165
50. C.J. Evans Uncertainty Evaluation for Measurements of Peak-to-valley Surface form Errors CIRP Annals - Manufacturing Technology 57 1 2008 509 512
51. C.J. Evans Certification, Self-calibration, and Uncertainty in Testing Optical Flats Proceedings of the SPIE 7656 2010 76560S 10.1117/12.865762
52. C.J. Evans, and J.B. Bryan Structured, Textured or Engineered Surfaces CIRP Annals - Manufacturing Technology 48 2 1999 541 556
53. C.J. Evans, R.J. Hocken, and W.T. Estler Self-calibration: Reversal, Redundancy, Error Separation and Absolute Testing CIRP Annals - Manufacturing Technology 45 2 1996 617 634
54. K.C. Fan, Y.T. Fei, X.F. Yu, Y.J. Chen, W.L. Wang, F. Chen, and Y.S. Liu Development of a Low-cost micro-CMM for 3D Micro/nano Measurements Measurement Science and Technology 17 3 2006 524 532
55. F.Z. Fang, Y.H. Chen, X.D. Zhang, X.T. Hu, and G.X. Zhang Nanometric Cutting of Single Crystal Silicon Surfaces Modified by Ion Implantation CIRP Annals - Manufacturing Technology 60 1 2011 527 530
56. F.Z. Fang, and Y.C. Liu On Minimum Exit-burr in Micro Cutting Journal of Micromechanics and Microengineering 14 2004 984 988
57. F.Z. Fang, H. Wu, and Y.C. Liu Modeling and Investigation on Machining Mechanism of Nano-cutting Monocrystalline Silicon International Journal of Machine Tools and Manufacture 45 2005 1681 1686
58. F.Z. Fang, H. Wu, W. Zhou, and X.T. Hu A Study on Mechanism of Nano-cutting Single Crystal Silicon Journal of Materials Processing Technology 184 1-3 2007 210 407
59. F.Z. Fang, Z. Xiong, and X.T. Hu An Experimental Study of Micromachining Step-mirror for Laser Diode Beam Shaping Journal of Micromechanics and Microengineering 16 2006 214 218
60. F.Z. Fang, X.D. Zhang, and X.T. Hu Cylindrical Coordinate Machining of Optical Freeform Surface Optics Express 16 2008 7323 7329
61. F.Z. Fang, and V.C. Venkatesh Diamond Cutting of Silicon with Nanometric Finish CIRP Annals - Manufacturing Technology 47 1 1998 45 49
62. Z.X. Feng, Y. Luo, and Y.J. Han Design of LED Freeform Optical System for Road Lighting with High Luminance/Illuminance Ratio Optics Express 18 21 2010 22020 22031
63. C. Flucke, R. Gläbe, and E. Brinksmeier Diamond Micro Chiselling of Molding Inserts for Optical Micro Structures Proceedings of the 23th ASPE Annual Meeting and 12th ICPE Portland 2008
64. G.W. Forbes Shape Specification for Axially Symmetric Optical Surfaces Optics Express 15 8 2007 5218 5226
65. G.W. Forbes Characterizing the Shape of Freeform Optics Optics Express 20 3 2012 2483 2499
66. F. Fournier, and J. Rolland Design Methodology for High Brightness Projectors Journal of Display Technology 4 2008 86 91
67. F. Fournier, and J. Rolland Optimization of Freeform Lightpipes for Light-emitting-diode Projectors Applied Optics 47 2008 957 966
68. F. Gao, R.K. Leach, J. Petzing, and J.M. Coupland Surface Measurement Errors Using Commercial Scanning White Light Interferometers MST 19, Id015303 2008
69. W. Gao Fabrication of Large-area Micro-lens Arrays with Fast Tool Control International Journal of Precision Engineering and Manufacturing 9 4 2008 32 38
70. W. Gao, J. Aoki, B.F. Ju, and S. Kiyono Surface Profile Measurement of a Sinusoidal Grid Using an Atomic Force MICROScope on a Diamond Turning Machine Precision Engineering 31 2007 304 309
71. W. Gao, T. Araki, S. Kiyono, Y. Okazaki, and M. Yamanaka Precision Nano-fabrication and Evaluation of a Large Area Sinusoidal Grid Surface for a Surface Encoder Precision Engineering 27 2003 289 298
72. A. Garcia-Botella, A.A. Fernandez-Balbuena, and E. Bernabeu Elliptical Concentrators Applied Optics 45 2006 7622 7627
73. K. Garrard, T. Bruegge, J. Hoffman, T. Dow, and A. Sohn Design Tools for Freeform Optics Proceedings of the SPIE 5874 2005 95 105
74. R.D. Geckeler, and A. Just Optimized Use and Calibration of Autocollimators in Deflectometry Proceedings of the SPIE 6704 2007 670407.1 670407.12
75. R. Gläbe, C. Flucke, T. Bothe, and E. Brinksmeier High Speed Fringe Reflection Technique for nm Resolution Topometry of Diamond Turned Free Form Mirrors Proceedings of 5th euspen International Conference 2005
76. Y. Gogotsi, C. Baek, and F. Kirscht Raman Microspectroscopy Study of Processing-induced Phase Transformations and Residual Stress Semiconductor Science and Technology 14 1999 936 944
77. H.M. Gutierrez, and P.I. Ro Magnetic Servo Levitation by Sliding-mode Control of Nonaffine Systems with Algebraic Input Invertibility IEEE Transactions on Industrial Electronics 52 5 2005 1449 1455
78. H. Haitjema, W.O. Pril, and P.H.J. Schellekens Development of a Silicon-based Nanoprobe System for 3-d Measurements CIRP Annals - Manufacturing Technology 50 1 2001 365 368
79. X. Hao, Z.R. Zheng, X. Liu, and P.F. Gu Freeform Surface Lens Design for Uniform Illumination Journal of Optics A: Pure and Applied Optics 10 7 2008 075005
80. R. Henselmans Non-contact measurement machine for freeform optics, Technische Universiteit Eindhoven 2009 (PhD thesis)
81. R. Henselmans, L.A. Cacace, G.F.Y. Kramer, and P.C.J.N. Rosielle The NANOMEFOS Non-contact Measurement Machine for Freeform Optics Precision Engineering 35 2011 607 624
82. R.A. Hicks Direct Methods for Freeform Surface Design Proceedings of the SPIE 6668 2007 666802
83. R.A. Hicks Controlling a Ray Bundle With a Free-form Reflector Optics Letters 33 2008 1672 1674
84. K. Hidaka, and P.H.J. Schellekens Study of a Small-sized Ultrasonic Probe CIRP Annals - Manufacturing Technology 55 1 2006 567 570
85. R. Horisaki, S. Irie, Y. Ogura, and J. Tanida Three-dimensional Information Acquisition Using a Compound Imaging System Optical Review 14 5 2007 347 350
86. H. Hoshi, N. Taniguchi, and H. Morishima Off-axial HMD optical system consisting of aspherical surfaces without rotational symmetry SPIE vol. 3653 1996 234 242
87. C.N. Huang Investigation of injection molding process for high precision polymer lens manufacturing 2008 The Ohio State University
88. C.N. Huang, L. Li, and A.Y. Yi Design and Fabrication of a Micro Alvarez Lens Array with a Variable Focal Length Microsystem Technologies 15 2009 559 563
89. ISO/IEC Guide 99, 1993, International Vocabulary of Basic and General Terms in Metrology.
90. ISO 13565-1, 1996, Geometrical product specification (GPS) - surface texture: profile method - profile method for surfaces having stratified functionalproperties. Part 1. Filtering and general measurement conditions.
91. ISO 25178-2, 2012, Geometrical Product Specification (GPS) - Surface Texture: Areal - Part 2: Terms, Definitions and Surface Texture Parameters.
92. ISO/TS 16610-29, 2006, Geometrical product specifications (GPS) - data extraction techniques by sampling and filtration - Part 29: Spline wavelets.
93. ISO/TS 16610-31, 2010, Geometrical product specifications (GPS) - filtration - Part 31: Robust profile filters: Gaussian regression filter.
94. ISO/TS 16610-32, 2009, 200Geometrical product specifications (GPS) - filtration - Part 32: Robust profile filters: Gaussian Regression Filter.
95. ISO/TS 16610-40, 2006, Geometrical product specifications (GPS) - filtration - Part 40: Morphological profile filters: basic concept; 2002.
96. ISO/TS 16610-41, 2006, Geometrical product specifications (GPS) - filtration - Part 41: Morphological profile filters: disk and horizontal seg-ment filters; 2002.
97. ISO/TS 16610-49, 2006, Geometrical product specifications (GPS) - filtration - Part 49: Morphological profile filters: scale space techniques; 2002.
98. ISO/WD 10110-19, 2006, Optics and photonics - preparation of drawings for optical elements and systems - Part 19: Freeform surfaces; 2012.
99. ISO11562 Geometrical Product Specification (GPS) - Surface Texture: Profile Method - Metrological Characteristics of Phase Correct Filters 1996 International Organization for Standardization Geneva
100. G. Jäger, E. Manske, and T. Hausotte Nanopositioning and Measuring Machine Proceedings of 2nd Euspen International Conference 2001 290 293
101. D. Jenkins, and R. Winston Tailored Reflectors for Illumination Applied Optics 35 10 1996 1669 1672
102. X. Jiang, P. Cooper, and P.J. Scott Freeform Surface Filtering Using the Diffusion Equation Proceedings of the Royal Society A 467 2010 841 859
103. X.J. Jiang, P.J. Scott, and D.J. WhiteHouse Freeform Surface Characterisation - A Fresh Strategy CIRP Annals - Manufacturing Technology 56 1 2007 553 556
104. X.J. Jiang, P.J. Scott, D.J. Whitehouse, and L. Blunt Paradigm Shifts in Surface Metrology. Part II. The Current Shift Proceedings of the Royal Society A 463 2007 2071 2099
105. X.J. Jiang, P.J. Scott, D.J. Whitehouse, and L. Blunt Paradigm Shifts in Surface Metrology. Part I. Historical Philosophy Proceedings of the Royal Society A 463 2007 2049 2070
106. X.J. Jiang, and D.J. Whitehouse Technological Shifts in Surface Metrology CIRP Annals - Manufacturing Technology 61 2 2012 815 836
107. C. Jones High Dynamic Range Surface Metrology 2012 Point measuring systems, euspen topical meeting: structure and freeform surfaces Baden, Austria
108. Kanolt, C.W., 1959, Multifocal opthalmic lenses, United States Patent, 2 (878):721.
109. D. Kapusi, T. Machleidt, E. Manske, K.H. Franke, and R. Jahn White Light Interferometry Utilizing the Large Measuring Volume of a Nanopositioning and Nanomeasuring Machine Proceedings/International Colloquium on Surfaces (Chemnitz: 2008) Aachen Shaker 2008 210 217
110. K. Kase, A. Makinouchi, T. Nakagawa, H. Suzuki, and F. Kimura Shape Error Evaluation Method of Free-form Surfaces Computer-Aided Design 31 8 1999 495 505
111. I. Kaya, K.P. Thompson, and J.P. Rolland Edge Clustered Fitting Grids for (-Polynomial Characterization of Freeform Optical Surfaces Optics Express 19 27 2011 26962 26974
112. S. Kim, and S. Kang Replication Qualities and Optical Properties of UV-moulded Microlens Arrays Jounral of Physics D: Applied Physics 36 2003 2451 2456
113. K.H. Ko, T. Maekawa, and N.M. Patrikalakis An Algorithm for Optimal Free-form Object Matching Computer-Aided Design 25 2003 913 923
114. K.H. Ko, T. Maekawa, N.M. Patrikalakis, H. Masuda, and F.E. Wolter Shape Intrinsic Properties for Free-form Object Matching Journal of Computing and Information Science in Engineering 3 2003 325 333
115. S. Kochengin, V. Oliker, and O.V. Tempski On the Design of Reflectors with Prespecified Distribution of Virtual Sources and Intensities Inverse Problesms 14 1998 661 678
116. R.C. Komanduri, and L.M. Raff Molecular Dynamics Simulation of the Nanometric Cutting of Silicon Philosophical Magazine B 81 12 2001 1989 2019
117. L.B. Kong, C.F. Cheung, S. To, and W.B. Lee An Investigation into Surface Generation in Ultra-precision Raster Milling Journal of Materials Processing Technology 209 8 2009 4178 4418
118. L.B. Kong, C.F. Cheung, S. To, and W.B. Lee Measuring Optical Freeform Surfaces Using a Coupled Reference Data Method Measurement Science and Technology 18 2007 2252
119. R. Krishnasamy, W. Wong, E. Shen, S. Pepic, R. Hornsey, and P.J. Thomas High Precision Target Tracking with a Compound-eye Image Sensor Proceedings of CCECE 2004-CCGEI 2004 Niagara Falls 2004
120. K. Kubala, E. Dowski, and W. Cathey Reducing Complexity in Computational Imaging Systems Optics Express 11 18 2003 2102 2108
121. M.V. Kunnavakkam, F.M. Houlihan, M. Schlax, and J.A. Liddle Low-cost, Low-loss Microlens Arrays Fabricated by Soft-lithography Replication Process Applied Physics Letters 82 2003 1152 1154
122. K. Lai, A.E. Rosenbluth, and S. Bagheri Experimental Result and Simulation Analysis for the Use of Pixelated Illumination from Source Mask Optimization for 22 nm Logic Lithography Process Proceedings of the SPIE 7274 2009 72740A
123. P. Leach Surface metrology with nanometre accuracy: euspen topical meeting: structured and freeform surfaces 2012
124. D. Lee, R. Haynes, and D. Ren Characterization of Lenslet Arrays for Astronomical Spectroscopy Paublication of the Astronomical Society of the Pacific 113 2001 1406 1419
125. K.W. Lee, Y.J. Noh, Y. Arai, Y. Shimizu, and W. Gao Precision mEasurement of Micro-lens Profile by Using a Force-controlled Diamond Cutting Tool on an Ultra-precision Lathe International Journal of Precision Technology 2 2011 211 225
126. G. Li, B. Wang, and S. Dong Design and Control of Dual-stage Feed Drive System in Ultra-precision Machine Tools Optics and Precision Engineering 17 6 2009 1426 1430
127. H.F. Li, C.F. Cheung, X.Q. Jiang, and W.B. Lee A Novel Robust Gaussian Filtering Method for the Characterization of Surface Generation in Ultra-precision Machining Precision Engineering 30 2006 421 430
128. L. Li, and A.Y. Yi Design and Fabrication of a Freeform Prism Array for 3D Microscopy Journal of the Optical Society of America A 27 2010 2613 2620
129. L. Li, and A.Y. Yi Design and Fabrication of a Freeform Microlens Array for a Compact Large-field-of-view Compound-eye Camera Applied Optics 51 2012 1843 1852
130. L.K. Li, and A.Y. Yi Design and Fabrication of a Freeform Microlens Array for Uniform Beam Shaping Microsystem Technologies 17 2011 1713 1720
131. T. Liebrich, and W. Knapp Improvements and Experimental Validation of a 3D-probing System for Micro-components CIRP Annals - Manufacturing Technology 61 1 2012 475 478
132. Q. Liu, X.Q. Zhou, and L.D. Wang A New Hybrid Macro- and Micro-range Fast Tool Servo International Conference on Mechanic Automation and Control Engineering (MACE), 2010 International Conference on IEEE, vol. 2010 2010 3124 3127
133. Y.T. Liu, and B.J. Li Precision Positioning Device Using the Combined Piezo-VCM Actuator with Frictional Constraint Precision Engineering 34 3 2010 534 545
134. Y.W. Liu Development of Huston's Method on Multi-body Dynamics China Mechanichal Engineering 11 6 2000 601 607
135. X.D. Lu, and D.L. Trumper Ultrafast Tool Servos for Diamond Yurning CIRP Annals - Manufacturing Technology 54 1 2005 383 388
136. Y. Luo, Z.X. Feng, Y.J. Han, and H.T. Li Design of Compact and Smooth Free-form Optical System with Uniform Illuminance for LED Source Optics Express 18 9 2010 9055 9063
137. T. Ma, J.C. Yu, and P. Liang Design of a Freeform Varifocal Panoramic Optical System with Specified Annular Center of Field of View Optics Express 19 5 2012 3843 3853
138. D. Malacara Optical Shop Testing 2007 Wiley-Interscience (ISBN 978-0-470135-96-9)
139. A. Mallock The Action of Cutting Tools Proceedings of the Royal Society of London 33 1881 127
140. E. Manske, T. Hausotte, R. Mastylo, T. Machleidt, K.H. Franke, and G. Jäger New Applications of the Nanopositioning and Nanomeasuring Machine by Using Advanced Tactile and Non-tactile Probes MST 18 2007 520 527
141. F. Marinello, P. Bariani, L. De Chiffer, and E. Savio Fast Technique for AFM Vertical Drift Compensation Measurement Science & Technology 18 2007 689 696
142. F. Marinello, P. Bariani, A. Pasquini, L. de Chiffre, M. Bossard, and G.B. Picotto Increase of Maximum Detectable Slope with Optical Profilers, Through Controlled Tilting and Image Processing Measurement Science & Technology 18 2007 384 389
143. F. Marinello, E. Savio, S. Carmignato, P. Bariani, L. De Chiffre, and M. Bossard Increase of Maximum Detectable Slope with Optical Profilers: Theory and Applicative Examples Proceedings of the 7th euspen, vol. 1 2007 333 336
144. F. Marinello, P. Bariani, A. Pasquini, and L. de Chiffre Increase of Maximum Detectable Slope with Optical Profilers, Through Controlled Tilting and Image Processing Measurement Science & Technology 18 2 2007 384 389
145. D.L. Marks, R.A. Stack, and D.J. Brady Three-dimensional Tomography Using a Cubic-phase Plate Extended Depth-of-field System Optics Letters 24 4 1999 253 255
146. Memorandum to US Industrial Metrologists. (2007) Three Flat Method for Calibration of Optical Flats and ISO 17025. NIST press.
147. M.E. Merchant Basic Mechanics of the Metal Cutting Process Journal of Applied Mechanics Review A11 1944 168 175
148. J.C. Miano, P. Benítez, and J.C. González RX, a Nonimaging Concentrator Applied Optics 34 1995 2226 2235
149. W. Michaeli, S. Heßner, F. Klaiber, and J. Forster Geometrical Accuracy and Optical Performance of Injection Moulded and Injection-compression Moulded Plastic Parts CIRP Annals - Manufacturing Technology 56 1 2007 545 548
150. J. Millerd, N. Brock, J. Hayes, M. North-Morris, M. Novak, and J.C. Wyant Pixelated Phase-mask Dynamic Interfero-meter Proceedings of the SPIE 5531 2004 304 314
151. J.C. Miñano, P. Benítez, and Blen José High-efficiency Free-form Condenser Overcoming Rotational Symmetry Limitations Optics Express 16 2008 20193 20205
152. J.C. Miñano, P. Benitez, and A. Santamaria Free-form Optics for Illumination Optical Review 16 2009 99
153. J.C. Miñano, and J.C. Gonzáles New Method of Design of Nonimaging Concentrators Applied Optics 31 1992 3051 3060
154. J.C. Miñano, J.C. González, and P. Benítez A High-gain, Compact, Nonimaging Concentrator: RXI Applied Optics 34 1995 7850 7856
155. T. Miyashita Standardization for Microlenses and Microlens Arrays Japanese Journal of Applied Physics 46 8B 2007 5391 5396
156. K. Mizutani, T. Kawano, and Y. Tanaka A Piezoelectric-drive Table and its Application to Micro-grinding of Ceramics Materials Precision Engineering 12 1990 219 226
157. P. Molly, M.G. Schinker, and W. Doell Brittle Fracture Mechanisms in Single Point Glass Abrasion Proceedings of the SPIE 802 1987 81 88
158. I. Moreno, and C.C. Sun Modeling the Radiation Pattern of LEDs Optics Express 16 3 2008 1808
159. Y. Morimoto, Y. Ichida, and R. Sato Development of Cutting Device with Enlargement Mechanism of Displacement - Application of Non-circular Cutting Journal of Advanced Mechanical Design, Systems, and Manufacturing 2 4 2008 474 481
160. T. Moriya, K. Nakamoto, T. Ishida, and Y. Takeuchi Creation of V-shaped Microgrooves with Flat-ends by 6-axis Control Ultraprecision Machining CIRP Annals - Manufacturing Technology 59 1 2010 61 66
161. Moriyasu S, Yamagata Y, Ohmori H, et al., 2003, Probe type shape measuring sensor, and NC processing equipment and shape measuring method using the sensor, US Patent 6539642.
162. F. Muñoz, P. Benítez, and J.C. Miñano High-order Aspherics: The SMS Nonimaging Design Method Applied to Imaging Optics Proceedings of the SPIE 7061, 70610G 2008 10.1117/12.794854
163. Y.J. Noh, Y. Arai, and W. Gao Improvement of a Fast Tool Control Unit for Cutting Force Measurement in Diamond Turning of Micro-lens Array International Journal of Surface Science and Engineering 3 3 2009 227 241
164. P. Nussbaum, R. Volkel, and H.P. Herzig Design, Fabrication and Testing of Microlens Arrays for Sensors and Microsystems Pure and Applied Optics 6 1997 617 636
165. R.G. Ohl, T. Dow, and A.A. Sohn Highlights of the ASPE 2004 Winter Topical Meeting on Free-form Optics: Design, Fabrication, Metrology, Assembly Proceedings of the SPIE 5494 2004 49 56
166. H. Ohmori, I.D. Marinescu, and K. Katahira Electrolytic In-Process Dressing (ELID) Technologies: Fundamentals and Applications 2011 CRC Press
167. H. Ohmori, Y. Watanabe, W.M. Lin, K. Katahira, and T. Suzuki An Ultraprecision On-machine Measurement System Key Engineering Materials 295/296 2005 375 380
168. V. Oliker Geometric and Variational Methods in Optical Design of Reflecting Surfaces with Prescribed Irradiance Properties Proceedings of the SPIE 5924 2005 592407
169. V. Oliker Freeform Optical Systems with Prescribed Irradiance Properties in Near-Field Proceedings of the SPIE 6342 2 2006
170. V. Oliker Optical Design of Freeform Two-mirror Beam-shaping Systems Journal of the Optical Society of America A 24 2007 3741 3752
171. P.T. Ong, J.M. Gordon, and A. Rabl Tailored Edge-ray Designs for Illumination with Tubular Source Applied Optics 35 22 1996 4321 4371
172. J. Osmer, S. Weingärtner, O. Riemer, and E. Brinksmeier Diamond Machining of Free-form Surfaces: A Comparison of Raster Milling and Slow Tool Servo Machining Proceedings of the 7th euspen International Conference 2007 189 192
173. H. Ottevaere, B. Volckaerts, J. Lamprecht, and J. Schwider Two-dimensional Plastic Microlens Arrays by Deep Lithography with Protons: Fabrication and Characterization Journal of Optics A: Pure and Applied Optics 4 S22 2002 10.1088/1464-4258/4/4/354
174. H. Owari, S. Kawai, Y. Mukai, and S. Terada Technology Development of Mold Fabrication for Free-form Surface, DOE and Microlens Proceedings of the SPIE 6110 2006 61100T
175. B. Parkyn, and D. Pelka Free-form Illumination Lenses Designed by a Pseudo-rectangular Lawnmower Algorithm Proceedings of the SPIE 6338 2006 633803
176. W.A. Parkyn Design of Illumination Lenses Via Extrinsic Differential Geometry Proceedings of the SPIE 3428 1998 154 162
177. W.A. Parkyn, P.L. Gleckman, and D.G. Pelka Converging TIR Lens for Nonimaging Concentration of Light From Compact Incoherent Sources Proceedings of the SPIE 2016 1993 10.1117/12.161947
178. S.R. Patterson, and E.B. Magrab Design and Testing of a Fast Tool Servo for Diamond Turning Precision Engineering 7 3 1985 123 128
179. J. Peters, J.B. Bryan, W.T. Estler, and C. Evans Contribution of ClRP to the Development of Metrology and Surface Quality Evaluation During the Last Fifty Years CIRP Annals - Manufacturing Technology 50 2 2001 471 488
180. M. Petz, R. Tutsch, R. Christoph, M. Andraes, and B. Hopp Tactile - Optical Probes for Three-dimensional Microparts Measurement 45 2012 2288 2298
181. W.T. Plummer Free-form optical components in some early commercial products Proc. Of SPIE 5865 2005 586509
182. H.M. Pollicove Survey of Present Lens Molding Techniques Proceedings of the SPIE 896 1988
183. K. Pulli Multiview Registration for Large Data Sets Second International Conference on 3-D Imaging and Modeling 1999 160 168
184. A. Rabl, and J.M. Gordon Reflector Design for Illumination with Extended Sources: The Basic Solutions Applied Optics 33 25 1994 6012 6021
185. S. Ravishankar, H.N.V. Dutt, and B. Gurumoorthy Automated Inspection of Aircraft Parts Using a Modified ICP Algorithm The International Journal of Advanced Manufacturing Technology 46 2010 227 236
186. C. Richter, M. Kurz, M. Knauer, and Faber Ch Machine-integrated Measurement of Specular Free-formed Surfaces Using Phase-measuring Deflectometry, vol. 6 EUSPEN 2009 San Sebastian, Spain 2009 21
187. H. Ries, and J. Muschaweck Tailored Freeform Optical Surfaces Journal Optical Society of America 19 3 2002 590 595
188. H. Ries, and A. Rabl Edge-ray Principle of Nonimaging Optics Journal Optical Society of America 11 10 1994 2627 2632
189. J.M. Rodgers, and K.P. Thompson Benefits of Freeform Mirror Surfaces in Optical Design Proceedings of the SPIE 5494 31 2004 73 78
190. I.J. Saunders, L. Ploeg, M. Dorrepaal, and B. van Venrooy Fabrication and Metrology of Freeform Aluminium Mirrors for the SCUBA-2 Instrument Proceedings of the SPIE 5869 2005
191. E. Savio, L. de Chiffre, and R. Schmitt Metrology of Freeform Shaped Parts CIRP Annals - Manufacturing Technology 56 2 2007 810 835
192. E. Savio, F. Marinello, P. Bariani, and S. Carmignato Feature-oriented Measurement Strategy in Atomic Force Microscopy CIRP Annals - Manufacturing Technology 56 1 2007 557 560
193. S. Scheiding, A. Gebhardt, and R. Eberhardt Micro Lens Array Milling on Large Wafers Optik & Photonik 4 4 2009 41 45
194. S. Scheiding, A.Y. Yi, and A. Gebhardt Freeform Manufacturing of a Microoptical Lens Array on a Steep Curved Substrate by Use of a Voice Coil Fast Tool Servo Optics Express 19 24 2011 23938 23951
195. P. Schellekens, N. Rosielle, H. Vermeulen, M. Vermeulen, S. Wetzels, and W. Pril Design for Precision: Current Status and Trends CIRP Annals - Manufacturing Technology 47 2 1998 557 586
196. M.G. Schinker Sub-surface Damage Mechanisms at High-speed Ductile Machining of Optical Glasses Journal of the International Society for Precision Engineering and Nanotechnology 13 3 1991 208 218
197. M.G. Schinker, and W. Döll Turning of Optical Glasses at Room Temperature Proceedings of the SPIE 802 1987 70 80
198. J.S. Schruben Formulation a Reflector-design Problem for a Lighting Fixture Journal of the Optical Society of America 62 1972 1498 1501
199. A. Schuler, A. Weckenmann, and T. Hausotte Enhanced Measurement of High Aspect Ratio Surfaces by Applied Sensor Tilting Proceedings of the 20th IMEKO World Congress Metrology for Green Growth09. 14.09.2012 Busan, Südkorea 2012
200. S. Seeger, and X. Laboureux Feature Extraction and Registration - An Overview. Principles of 3D Image Analysis and Synthesis 2000 Academic Publishers Boston, Dordrecht, London 153 166
201. L. Shaw, and A. Weckenmann Automatic Registration Method for Hybrid Optical Coordinate Measuring Technology CIRP Annals - Manufacturing Technology 60 1 2011 539 542
202. S. Sherif, W.T. Cathey, and E.R. Dowski Phase Plate to Extend the Depth of Field of Incoherent Hybrid Imaging Systems Applied Optics 43 13 2004 2709 2721
203. A.Y. Shibuya, Y. Yoshikawa, W. Gao, and Y. Nagaike A Spiral Scanning Probe System for Micro-aspheric Surface Profile Measurement International Journal of Advanced Manufacturing Technology 46 2010 845 862
204. P. Shore, C. Cunningham, D. DeBra, C.J. Evans, R. Gilmozzif, and H. Kunzmann Precision Engineering for Astronomy and Gravity Science CIRP Annals - Manufacturing Technology 59 2 2010 694 716
205. A. Shorey, W. Kordonski, and M. Tricard Deterministic Precision Finishing of Domes and Conformal Optics Proceedings of the SPIE 5786 2005 310 318
206. P.J. Smilie, and T.J. Suleski Variable-diameter Refractive Beam Shaping with Freeform Optical Surfaces Optics Letters 36 21 2011 4170 4172
207. P. Spanò Free-forms Optics Into Astronomical Use: The Case of an All-mirror Anamorphic Collimator Proceedings of the SPI 7018 2008 701840
208. J. Stack Freeform DOEs Extend Optical Lithography Chip Design 2009
209. P. Su, Y. Wang, J.H. Burge, K. Kaznatcheev, and M. Idir Non-null Full Field X-ray Mirror Metrology Using SCOTS: A Reflection Deflectometry Approach Optics Express 20 11 2012 12393 12407
210. L.W. Sun, S.Z. Jin, and S.Y. Cen Free-form Microlens for Illumination Applications Applied Optics 48 29 2009 5520 5527
211. H. Suzuki, S. Kodera, S. Maekawa, and N. Morita Study on Precision Grinding of Micro Aspherical Surface by Inclined Rotational Grinding Journal Japan Society for Precision Engineering 64 1998 619 623
212. N. Suzuki, H. Yokoi, and E. Shamoto Micro/nano Sculpturing of Hardened Steel by Controlling Vibration Amplitude in Elliptical Vibration Cutting Precision Engineering 35 2011 44 50
213. M.V. Swain Microfracture About Scratches in Brittle Solids Proceedings of the Royal Society A366 1979 575 597
214. K. Takahashi Development of Ultrawide-angle Compact Camera Using Free-form Optics Optical Review 18 1 2011 55 59
215. H. Takeuchi, K. Yosizumi, and H. Tsutsumi Ultrahigh Accurate 3-D Profilometer Using Atomic Force Probe of Measuring Nanometer Proceedings of ASPE Winter Topical Meeting 2004 102 107
216. Y. Takeuchi, S. Maeda, T. Kawai, and K. Sawada Manufacture of Multiple-focus Micro Fresnel Lenses by Means of Nonrotational Diamond Grooving CIRP Annals - Manufacturing Technology 51 1 2002 343 346
217. Y. Takeuchi, Y. Yoneyama, T. Ishida, and T. Kawai 6-Axis Control Ultraprecision Microgrooving on Sculptured Surfaces with Non-rotational Cutting Tool CIRP Annals - Manufacturing Technology 58 1 2009 53 56
218. M. Tanigami, S. Ogata, S. Aoyama, T. Yamashita, and K. Imanaka Low Wavefront Aberration and High-temperature Stability Molded Micro Fresnel Lens Photonics Technology Letters, IEEE 1 1989 384 385
219. N. Taniguchi Current Status in and Future Trends of Ultraprecision Machining and Ultrafine Materials Processing CIRP Annals - Manufacturing Technology 32 2 1983 573 582
220. A.L. Timinger, J.A. Muscaweek, and H. Ries Designing Tailored Free-form Surfaces for General Illumination Proceedings of the SPIE 5186 2003 128 132
221. S.B. Toh, and R. McPherson Fine Scale Abrasive Wear of Ceramics by a Plastic Cutting Process, Science of Hard Materials Institute Physics Conference Series 75 9 1986 856 871
222. Y. Tohme Slow Slide Servo (S3) machining of freeform optics - abstract Moore Nanotechnology Systems 2004 http://www.nanotechsys.com/ technology/technical-papers/
223. Y. Tohme Grinding Aspheric and Freeform Micro-optical Molds, Micro-machining Technology for Micro-optics and Nano-optics Proceedings of the SPIE 6462 2007 (64620 K.1-64620 K.8)
224. Y. Tohme Trends in Ultra-precision Machining of Freeform Optical Surfaces Optical Fabrication and Testing OSA Technical Digest (CD), OThC6 2008
225. D.L. Trumper, and X.D. Lu Electromagnetically-driven ultra-fast tool servos for diamond turning. PhD Dissertation Massachusetts Institute of Technology 2005
226. E. Uhlmann, G. Häusler, M. Kurz, and Ch. Faber Phase Measuring Deflectometry Setup for Machine Integrated Measurement of Specular Surfaces, vol. 2.49 EUSPEN 2011 Como, Italy 2011
227. R. van den Berg Extreme UV Lithography Preserves Moore's Law Optics & Laser Europe 129 2005 29 31
228. D.D. Walker, A.T.H. Beaucamp, V. Doubrovski, and C. Dunn New Results Extending the Precessions Process to Smoothing Ground Aspheres and Producing Freeform Parts Proceedings of the SPIE 5869 2005 58690E 10.1117/12.617067
229. K. Wang, F. Chen, Z.Y. Liu, and X.B. Luo Design of Compact Freeform Lens for Application Specific Light-emitting Diode Packaging Optics Express 18 2 2010 413 425
230. K. Wang, D. Wu, F. Chen, and Z. Liu Angular Color Uniformity Enhancement of White Light Emitting Diodes Integrated with Freeform Lenses Optics Letters 35 2010 1860 1862
231. Q.C. Wang, X.D. Zhang, Y. Peng, and F.Z. Fang Data Filtering of Optical Freeform Measurement Based on a Modified 2D Cascaded Approximating Spline Filter Proceedings of the SPIE 8416, 84160J 2012 10.1117/12.978166
232. Y.B. Wang, C.L. Wang, Q.R. Xing, and F. Liu Periodic Optical Delay Line Based on a Tilted Parabolic Generatrix Helicoid Reflective Mirror Applied Optics 48 11 2009 1998 2005
233. A. Weckenmann, T. Estler, G. Peggs, and D. McMurtry Probing Systems in Dimensional Metrology CIRP Annals - Manufacturing Technology 53 2 2004 657 684
234. A. Weckenmann, and B. Gawande Prüfen von Werkstücken mit gekrümmten Flächen auf Koordinatenmessgeräten Technisches Messen tm 54 7/8 1987 277 284
235. A. Weckenmann, X. Jiang, and K.D. Sommer Multisensor Data Fusion in Dimensional Metrology CIRP Annals - Manufacturing Technology 58 2 2009 701 721
236. A. Weckenmann, G. Peggs, and J. Hoffmann Probing Systems for Dimensional Micro and Nano Metrology Measurement Science & Technology 17 3 2006 504 509
237. A. Weckenmann, and R.D. Peters Mathematische Beschreibung von gekrümmten Oberflächen für die Anwendung in der Koordinatenmesstechnik CIRP Annals - Manufacturing Technology 32 1 1983 453 457
238. A. Weckenmann, and A. Schuler Application of Modern High Resolution Tactile Sensors for Micro-objects International Journal of Precision Technology 2/2/3 2011 266 288
239. A. Weckenmann, A. Schuler, and R.J.B. Ngassam enhanced Measurement of Steep Surfaces by Sensor Tilting Proceedings of the 56th international scientific colloquium, vol. ID 134 Ilmenau 2011 1
240. D.J. Whitehouse Handbook of Surface Metrology 1994 Institute of Physics Bristol (ISBN 0-7503-0039-6)
241. I. Widdershoven, R.L. Donker, and H.A.M. Spaan Realization and Calibration of the Isara 400 Ultra-precision CMM Journal of Physics: Conference Series 311 2011 012002
242. R. Winston, J.C. Miñano, and P. Benítez Nonimaging Optics 2005 Elsevier
243. R.M. Wu, H.F. Li, Z.R. Zheng, and X. Liu Freeform Lens Arrays For Off-axis Illumination in an Optical Lithography System Applied Optics 50 5 2011 725 732
244. J.C. Wyant Dynamic Interferometry Optics & Photonics News 14 4 2003 36 41
245. J.C. Wyant, and K. Creath Basic Wavefront Aberration Theory for Optical Metrology. Chapter 1 in Applied Optics and Optical Engineering Xl 1992 Academic Press 28 39 1992
246. L. Xu, K. Chen, Q. He, and G. Jin Design of Freeform Mirrors in Czerny-Turner Spectrometers to Suppress Astigmatism Applied Optics 48 2009 2871 2879
247. A. Yabe Representation of Freeform Surfaces Suitable for Optimization Applied Optics 51 15 2012 3054 3058
248. Y. Yamamoto, H. Suzuki, T. Okino, Y. Hijikata, and T. Moriwaki Ultra Precision Grinding of Micro Aspherical Surface Proceedings of ASPE Annual Meeting 2004 558 661
249. J.W. Yan, T. Asami, and H. Harada Fundamental Investigation of Subsurface Damage in Single Crystalline Silicon Caused by Diamond Machining Precision Engineering 33 2009 378 386
250. J.W. Yan, Z.Y. Zhang, T. Kuriyagawa, and H. Gonda Fabricating Micro-structured Surface by Using Single-crystalline Diamond Endmill International Journal of Advanced Manufacturing Technology 51 2010 957 964
251. J.W. Yan, H.W. Zhao, and T. Kuriyagawa Effects of Tool Edge Radius on Ductile Machining of Silicon: An Investigation by FEM Semiconductor Science and Technology 24 2009 075018
252. V.V. Yashchuk, S. Barber, E.E. Domning, and J.L. Kirschman Sub-microradian Surface Slope Metrology with the ALS Developmental Long Trace Profiler Nuclear Instruments and Methods in Physics Research A 616 2/3 2010 212 223
253. A.Y. Yi, and L. Li Design and Fabrication of a Freeform Phase Plate for High-order Ocular Aberration Correction Applied Optics 44 32 2005 6869 6876
254. A.Y. Yi, and L. Li Design and Fabrication of a Micro-lens Array by Use of a Slow Tool Servo Optics Letters 30 13 2005 1707 1709
255. Z.Q. Yin, Y.F. Dai, and S.Y. Li Fabrication of Off-axis Aspheric Surfaces Using a Slow Tool Servo International Journal of Machine Tools & Manufacture 51 2011 404 410
256. P. Zamora, A. Cvetkovic, M. Buljan, and M. Hernandez Advanced PV Concentrators 34th IEEE of Photovoltaic Specialists Conference 2009 929 932
257. X.D. Zhang, F.Z. Fang, H.B. Wang, and G.S. Wei Ultra-precision Machining of Sinusoidal Surfaces Using the Cylindrical Coordinate Method Journal Micromechanics and Mircoengineering 19 2009 054004 (pp. 7)
258. X.D. Zhang, F.Z. Fang, Q.Q. Wu, X.L. Liu, and H.M. Gao Coordinate Transformation Machining of Off-axis Aspheric Mirrors International Journal of Advanced Manufacturing Technology 2012 10.1007/s00170-012-4642-x
259. X.D. Zhang, F.Z. Fang, L.H. Yu, L.L. Jiang, and Y.W. Guo Slow Slide Servo Turning of Compound Eye Lens Optical Engineering 52 2 2013 023401
260. X.D. Zhang, H.M. Gao, Y.W. Guo, and G.X. Zhang Machining of Optical Freeform Prisms by Rotating Tools Turning CIRP Annals - Manufacturing Technology 61 1 2012 519 522