Ultra-precision grinding

CIRP Annals - Manufacturing Technology

Volumn 59, Issue 2, 2010, Pages 652-671

  Brinksmeier, E ^a   Mutlugunes Y ^a   Klocke, F ^b   Aurich, J C ^c   Shore, P ^d   Ohmori, H ^e  

^a UNIVERSITY OF BREMEN   (Germany)

^b RWTH AACHEN UNIVERSITY   (Germany)

^c Rheinland Pfälzische Technische Universität Kaiserslautern Landau   (Germany)

^d CRANFIELD UNIVERSITY   (United Kingdom)

^e INST OF PHYS AND CHEMICAL RESEARCH   (Japan)

Author keywords

Finishing; Grinding; Ultra precision

Indexed keywords

ASTRONOMICAL APPLICATION; DIFFICULT TO MACHINE MATERIALS; FORM ACCURACY; FUNCTIONAL PARTS; GENERAL ASPECTS; GRINDING; GRINDING PROCESS; GRINDING TOOLS; HIGH QUALITY; OPTICAL INDUSTRIES; SELECTED EXAMPLES; SURFACE FINISHES; SURFACE INTEGRITY; ULTRA PRECISION; ULTRA-PRECISION MACHINE TOOLS; ULTRAPRECISION GRINDING;

GRINDING MILLS; PRECISION ENGINEERING;

GRINDING (MACHINING);

EID: 77955551629     PISSN: 00078506     EISSN: 17260604     Source Type: Journal    
DOI: 10.1016/j.cirp.2010.05.001     Document Type: Article

References (228)

1. K. Abe, T. Ishikawa, Y. Koma, K. Arai, and M. Kitano Development of an Ultra-precision Grinding Machine with Trigonal Prism Type Pentahedral Structure for 400 mm Silicon Wafer Proceedings of the 1st euspen International Conference, vol. 1 Bremen, Germany 1999 16 19
2. E. Ahearne, and G. Byrne Simulation of the Local Kinematics in Rotational Grinding Annals of the CIRP 57 1 2008 333 337
3. J. Anderson, P. Hollman, and S. Jakobson Abrasive Capacity of Thin Film Diamond Structures Key Engineering Materials 196 2001 141 148
4. Ardelt T (2001) Einfluss der Relativgeschwindigkeit auf den Prozess und das Arbeitsergebnis beim Planschleifen mit Planetenkinematik. German Ph.D. Thesis, Technische Universität Berlin.
5. T. Ardelt Belastung der Schleifscheiben beim Planschleifen mit Plantenkinematik Industrial Diamond Review 35 2001 116 124
6. J.C. Aurich, J. Engmann, G. Schueler, and R. Haberland Micro Grinding Tool for Manufacture of Complex Structures in Brittle Materials Annals of the CIRP 58 1 2009 311 314
7. J.C. Aurich, G.M. Schüler, and J. Engmann Komplexe Mikrostrukturierung von Hartmetall mit 20 μm Mikroschleifstiften Diamond Business 2009 22 27
8. M.J. Ball, N. Murphy, and P. Shore Electrolytically Assisted "Ductile" Mode Diamond Grinding of BK7 and SF10 Optical Glasses Proceedings of the SPIE 1573 1991 30 38
9. Bifano TG (1988) Ductile-Regime Grinding of Brittle Materials. Ph.D. Thesis, North Carolina State University.
10. T.G. Bifano Ductile-Regime Grinding of Brittle Materials: Experimental Results and the Development of a Model Proceedings of the SPIE 966 1988 108 115
11. T.G. Bifano, T.A. Dow, and V. Scattergood Ductile-Regime Grinding-A new Technology for Machining Brittle Materials Transactions of the ASME 113 1991 184 189
12. T.G. Bifano, and P.A. Bierden Fixed-Abrasive Grinding of Brittle Hard-Disk Substrates International Journal of Machine Tools and Manufacture 37 7 1997 935 946
13. T.G. Bifano, and Y. Yi Acoustic Emission as an Indicator of Material-Removal Regime in Glass Micro-Machining Precision Engineering 14 4 1992 219 228
14. W.S. Blackley, and R.O. Scattergood Ductile-Regime Machining Model for Diamond Turning of Brittle Materials Journal of the International Society for Precision Engineering and Nanotechnology 13 2 1991 95 103
15. Blake PN (1989) Ductile Regime Diamond Turning of Germanium and Silicon. Ph.D. Thesis, North Carolina State University.
16. P.N. Blake, and R.O. Scattergood Ductile-Regime Machining of Germanium and Silicon Journal of the American Ceramic Society 73 4 1990 949 957
17. Böckem J (1973) Technologisches Verhalten von Diamant- Topfschleifscheiben beim Flachschleifen optischer Gläser. German Ph.D. Thesis, Technische Universität Braunschweig.
18. O. Braun, G. Warnecke, and J.C. Aurich Simulation-Based Development of Superabrasive Grinding Wheels with Defined Grain Structure Transactions of North American Manufacturing Research Institution 33 2005 351 358
19. P.W. Bridgman The Effect of Hydrostatic Pressure on the Fracture of Brittle Substances Journal of Applied Science 18 1947 246 258
20. P.W. Bridgman, and I. Simon Effects of very High Pressures on Glass Journal of Applied Science 24 4 1953 405 413
21. E. Brinksmeier, C. Heinzel, and N. Bleil Superfinishing and Grind-strengthening with Elastic Bonding System Journal of Materials Processing Technology 209 2009 6117 6123
22. E. Brinksmeier, K. Rickens, and D. Grimme Duktiler Materialabtrag beim Schleifen sprödharter Werkstoffe Jahrbuch Schleifen, Honen, Läppen und Polieren 60 2001 50 67
23. E. Brinksmeier, K. Rickens, O. Riemer, and D. Grimme Engineered Diamond Wheels for Precision Ductile Grinding Production Engineering 13 2 2006 275 280
24. E. Brinksmeier, and O. Riemer Metal Cutting of Microstructures Proceedings of the 1st International Conference on Multi-Material Micro Manufacture (4M) Karlsruhe, Germany 2005 19 25
25. E. Brüche Die mechanisch beanspruchte Oberfläche nach Beobachtungen im Elektronenmikroskop VDI-Berichte 90 1965 95 100
26. J. Bryan International Status of Thermal Error Research Annals of the CIRP 39 2 1990 645 656
27. Busch M (1968) Ritz-und Verschleißuntersuchungen an spröden Werkstoffen mit einzelkornbestückten Hartstoffwerkzeugen. German Ph.D. Thesis, Technische Hochschule Hannover.
28. K. Carlisle, J. Fitzpatrick, P. McKeown, and P. Shore Review of the Ultra Precision Machining Research Facility-the 'NION' Machine Proceedings of the 3rd International Conference on Ultra Precision Manufacturing Engineering Aachen, Germany 1994 89 95
29. D.H. Cha, H.J. Kim, J.K. Lee, H.U. Kim, S.S. Kim, and J.H. Kim A Study of Mold Grinding and Pressing Conditions in the Molding of Aspheric Glass Lenses for Camera Phone Module Materials and Manufacturing Processes 23 2008 683 689
30. C.L. Chao A Study on the Surface Integrity of Single Crystal Silicon Ground by CIFB Diamond Wheels (ELID) and Resin-bonded Diamond Wheels Proceedings of the 10th International Conference on Precision Engineering Yokohama, Japan 2001 376 380
31. C.L. Chao Ductile Behaviour in Single-point Diamond Turning of Single-crystal Silicon Journal of Material Processing Technology 127 2002 187 190
32. C.L. Chao, K.J. Ma, H.H. Chien, and H.J. Lin Surface and Sub-surface Characteristics of Metal-bond/ELID and resin-bond diamond ground single crystal silicon Proceedings of the International Workshop on Extreme Optics and Sensors Tokyo, Japan 2003 155 162
33. J. Chen, and I. De Wolf Study of Damage and Stress Induced by Backgrinding in Si Wafers Semiconductor Science and Technology 18 2003 261 268
34. W.K. Chen, T. Kuriyagawa, H. Huang, and N. Yosihara Machining of Micro Aspherical Mould Inserts Precision Engineering 29 2005 315 323
35. W.K. Chen, T. Kuriyagawa, H. Huang, H. Ono, M. Saeki, and K. Syoji A Novel Form Error Compensation Technique for Tungsten Carbide Mould Inserts Machining Utilizing Parallel Grinding Technology Key Engineering Materials 257-258 2004 41 46
36. X. Chen, W.B. Rowe, and R. Cai Precision Grinding Using cBN Wheels International Journal of Machine Tools and Manufacture 42 2001 585 593
37. J. Corbett, P. Morantz, D.J. Stephenson, and R. Read An Advanced Ultra Precision Face Grinding Machine Journal of Advanced Manufacturing Technology 20 2002 639 648 (Pubitemid 35361368)
38. J.A. Couey, E.R. Marsh, B.R. Knapp, and R.R. Vallance In Process Force Monitoring for Precision Grinding Semiconductor Si Wafers International Journal of Manufacturing Technology and Management 7 5-6 2005 430 440
39. K. Danyluk Smoother Scribing of Silicon Wafers 1986 NASA Technical Briefs 09/10
40. B. Denkena, L. de Leon, and B. Wang Grinding of Microstructured Functional Surfaces, A Novel Strategy for Dressing of Microprofiles Production Engineering 3 2009 41 48
41. Disco Corp. (2009) http://www.disco.co.jp/eg/index.html.
42. D. Dornfeld, S. Min, and Y. Takeuchi Recent Advances in Mechanical Micromachining Annals of the CIRP 55 2 2006 745 768
43. J. Engmann, G.M. Schüler, R. Haberland, M. Walk, and J.C. Aurich Efficient Technique for 3rd Micro Structuring of Carbide and Brittle Materials with Diamond Micro-shaft Grinding Tools Proceedings of the 9th euspen International Conference, vol. 2 San Sebastian, Spain 2009 97 100
44. C.J. Evans, and J.B. Bryan Structured", "Textured" or "Engineered" Surfaces Annals of the CIRP 48 2 1999 541 556
45. F.Z. Fang, and L.J. Chen Ultra-Precision Cutting for ZKN7 Glass Annals of the CIRP 49 1 2000 17 20
46. F.Z. Fang, X.D. Liu, and L.C. Lee Micro-Machining of Optical Glasses-A Review of Diamond-Cutting Glasses Sãdhanã-Proceeding in Engineering Sciences of the Indian Academy of Sciences 28 5 2003 945 955
47. F.Z. Fang, H. Wub, W. Zhouc, and X.T. Hu A Study on Mechanism of Nano-cutting Single Crystal Silicon Journal of Materials Processing Technology 184 1-3 2007 407 410
48. F.Z. Fang, and G.X. Zhang An Experimental Study of Optical Glass Machining International Journal of Advanced Manufacturing Technology 23 2004 155 160
49. Funck A (1994) Planschleifen mit Läppkinematik. German Ph.D. Thesis, Technische Universität Berlin.
50. J. Gäbler CompeDIA Micro Abrasive Pencils Jahresbericht Frauenhofer IST 2004 36 37
51. J. Gäbler, L. Schäfer, B. Menze, and H.W. Hoffmeister Micro Abrasive Pencils with CVD Diamond Coating Diamond and Related Materials 12 2003 707 710
52. M.C. Gerchman Specifications and Manufacturing Considerations of Diamond Machined Optical Components Proceedings of the Society of Photo Optical Instrumentation Engineer's Conference, vol. 607 Los Angeles 1986 36 45
53. R. Gilmozzi Riesenteleskope der Zukunft Spektrum der Wissenschaft 8 2006 28 36
54. J.H. Giovanola, and I. Finnie On the Machining of Glass Journal of Materials Science 15 1980 2508 2514
55. Grimme D (2010) Ultrapräzisionsschleifen von Stahl und neu synthetisierten PVD-Hartstoffschichten. German Ph.D. Thesis, Universität Bremen.
56. Haapalinna A (2004) Characterization Methods for Silicon Photodiode and Silicon Sub-surface Properties. Ph.D. Thesis, Helsinki University of Technology.
57. H.F. Hadamovsky Werkstoffe der Halbleitertechnik 1990 Deutscher Verlag für Grundstofftechnik Leipzig 2. Auflage
58. R. Haefeli Anwendungsmöglichkeiten von Schleifstiften Industrial Diamond Review 2 97 1997 164 168
59. P.O. Hahn The 300 m Silicon Wafer-A Cost and Technology Challenge Microelectronic Engineering 56 2001 3 13
60. H. Hashimoto, J. Takeda, K. Imai, and K. Blaedel Shear-Mode Grinding of Brittle Materials and Surface Characteristics International Journal of the Japan Society for Precision Engineering 27 2 1993 95 99
61. C. Heinzel, and K. Rickens Engineered Wheels for Grinding of Optical Glass Annals of the CIRP 58 1 2009 315 318
62. C. Heinzel, K. Rickens, D. Grimme, and Q. Zhao Dressing of Coarse-Grained Diamond Wheels for Ductile Machining of Brittle Materials, Towards Synthesis of Micro-/Nano-Systems. JSPE Publication Series No. 5 2006 Springer London pp. 305-307
63. U. Heisel, and J. Avroutine Process Analysis for the Evaluation of the Surface Formation and Removal Rate in Lapping Annals of the CIRP 50 1 2001 229 232
64. H.W. Hoffmeister, and M. Hlavac Grinding of Microstructures in Hardened Steel with CBN Tools Proceedings of the 17th Annual Meeting of the ASPE, vol. 27 St. Louis, USA 2002 490 494
65. H.W. Hoffmeister, and A. Wenda Investigations into the Microgrinding Technique for the Production of microstructures in Silicon and Glass Micro System Technologies 98 6th International Conference on Micro Electro, Opto, Mechanical Systems and Components 1998 433 438
66. H.W. Hoffmeister, and R. Wittmer Grinding Hard and Brittle Materials with CVD-Diamond Microgrinding Wheels Proceedings of the 24th Annual Meeting of the ASPE Monterey, USA 2009
67. http://www.nanotechsys.com.
68. H. Huang, W.K. Chen, and T. Kuriyagawa Profile Error Compensation Approach for Parallel Nanogrinding of Aspherical Mould Inserts International Journal of Machine Tools and Manufacture 47 2007 2237 2245
69. Y. Hwang, T. Kuriyagawa, and S.K. Lee Wheel Curve Generation Error Aspheric Microgrinding in Parallel Grinding Method International Journal of Machine Tools and Manufacture 46 2006 1929 1933
70. Y. Ichida Mechanical Properties and Grinding Performance of Ultrafine-crystalline cBN Abrasive Grains Diamond and Related Materials 17 2008 1791 1795
71. Ihara E (2005) Metal-coated Abrasives, Grinding Wheel Using Metal-coated Abrasives and Method of Producing Metal-coated Abrasives. US Patent 20050129975.
72. M. Iwai, K. Nakagawa, S. Sano, K. Tanaka, T. Uematsu, W. Mei, and K. Suzuki A New Diamond Wheel Containing Boron Doped Diamond Abrasives Enabling Electrically Conductive Cutting Edge and High Thermal Stability Key Engineering Materials 291 292 2005 57 62
73. M.J. Jackson, and B. Mills Vitrification Heat Treatment and Dissolution of Quartz in Grinding Wheel Bonding Systems British Ceramic Transactions 100 1 2009 1 9
74. T. Kamada Molding Examples (V Grooves, Complicated Surface Parts) and Quartz Glass Molding by Precise Glass Molding Method Journal of the Japan Society for Grinding Engineering 46 4 2002
75. K. Katahira, H. Ohmori, T. Saito, J. Komotori, and M. Mizutani ELID Grinding Characteristics and Surface Modifying Effects on Precise Lens Mold Materials Proceedings of the 7th Euspen International Conference, vol. 2 Bremen, Germany 2007 441 444
76. K. Katahira, C. Schmidt, O. Dambon, U. Schneider, F. Klocke, and H. Ohmori ELID Grinding Characteristics for the Machining of Optical Surface Quality for Ceramic Spherical Lens Molds Proceedings of the 5th Euspen International Conference, vol. 1 Aachen, Germany 2003 317 320
77. Th.v. Kármán Festigkeitslehre unter allseitigem Druck Zeitschrift des Vereins deutscher Ingenieure 55 42 1911 1749 1757
78. Kern D (1969) Flachschleifen von optischem Glas mit Diamanttopfschleifscheiben. German Ph.D. Thesis, Technische Universität Braunschweig.
79. Kleinevoß R (1991) Feinschleifen optischer Gläser. German Ph.D. Thesis, Rheinisch-Westfälische Technische Hochschule Aachen.
80. Klink A (2009) Funkenerosives und elektrochemisches Abrichten feinkörniger Schleifwerkzeuge. German Ph.D. Thesis, Rheinisch- Westfälische Technische Hochschule Aachen.
81. F. Klocke Manufacturing Processes 2 2009 Springer-Verlag Berlin Heidelberg
82. F. Klocke, A. Baus, and T. Beck Coolant Induced Forces in CBN Grinding with Shoe Nozzels Annals of the CIRP 49 1 2000 241 244
83. F. Klocke, O. Gerent, D. Pähler, and A. Jakob Flat Rates on Future Silicon Wafers: Precision Grinding Industrial Diamond Review 2 2000 149 156
84. F. Klocke, O. Gerent, and D. Pähler Effiziente Prozesskette zur Waferfertigung Zeitschrift für Wirtschaftlichen Fabrikbetrieb 95 3 2000 79 82
85. F. Klocke, and W. König Fertigungsverfahren Band 3: Abtragen Generieren und Lasermaterialbearbeitung 2007 Springer Berlin
86. F. Klocke, and D. Pähler Rotational Grinding of Future Silicon Wafers Proceedings of the 7th Scientific and Business Conference on Silicon Technology Roznov, Czech Republic 2000
87. F. Klocke, D. Pähler, and A. Haapalinna Rotational Grinding is Solution to Surface Damages-Silicon Wafer Production Altered Semicon West 2003, SEMI Technical Symposium: Innovations in Semiconductor Manufacturing San Francisco, USA 2003 473 474
88. N. Koch Duktile Bearbeitung optischer Gläser zur Herstellung asphärischer optischer Linsen Industrial Diamond Review 2 1992 118 126
89. Koch N (1991) Technologie zum Schleifen asphärischer optischer Linsen. German Ph.D. Thesis, Rheinisch-Westfälische Technische Hochschule Aachen.
90. W. König, and R. Kleinevoß Feinschleifen optischer Gläser Industrie-Anzeiger 99 1988 26 28
91. W. König, N. Koch, and R. Kleinevoß Schleif-und Werkzeugtechnologie bei der Feinbearbeitung optischer Gläser Jahrbuch Schleifen, Honen, Läppen und Polieren 1990 169 182
92. W. König, F.U. Meis, and F. Pahl Auswahl von Diamantwerkzeugen für die Kugelbearbeitung optischer Gläser Industrial Diamond Review 18 3 1984 136 143
93. W. König, and H.P. Meyer Überwachung des Abricht-und Schleifprozesses-ein wichtiger Schritt für die automatisierte Schleifbearbeitung Jahrbuch Schleifen, Honen, Läppen und Polieren 57 1993 217 233
94. K. Koichi, and N. Yukiyasu Newly Products Ultra-Precision Surface Grinding Machine and Grinding Techniques Journal of the Japan Society for Abrasive Technology 50 2006 377 380
95. R. Komanduri, D.A. Lucca, and Y. Tani Technological Advances in Fine Abrasive Processes Annals of the CIRP 46 2 1997 545 596
96. T. Kuriyagawa, M.S.S. Zahmaty, and K. Syoji A New Grinding Method for Aspheric Ceramic Mirrors Journal of Materials Processing Technology 62 4 1996 387 392
97. P.B. Leadbeater, M. Clarke, and W.J. Wills-Moren A Unique Machine for Grinding Large, Off-axis Optical Components: the OAGM 2500 Precision Engineering 11 4 1989 191 196
98. S.B. Lee, Y. Tani, T. Enomoto, and H. Sato Development of a Dicing Blade with Photopolymerizable Resins for Improving Machinability Annals of the CIRP 54 1 2005 293 296
99. Lehnicke S (2000) Rotationsschleifen von Silizium-Wafern. Ph.D. Thesis, Universität Hannover.
100. Z.C. Li, Z.J. Pei, and G.R. Fisher Simultaneous Double Side Grinding of Silicon Wafers: A Literature Review International Journal of Machine Tools and Manufacture 46 2006 1449 1458
101. L.J. Li, F.H. Zhang, and S. Dong Research on the 3-axis CNC Ultra-precision Grinding of Aspherical Mould Advanced Materials Research 69-70 2009 39 43
102. K. Lindsey Tetraform Grinding Proceedings of the SPIE 1573 1991 129 135
103. B. Linke, B. Maier, F. Klocke, and Ch. Zeppenfeld Tribologisches Einsatzverhalten von CBN beim Schleifen mit unterschiedlichen Kühlschmierstoffen Diamond Business 03 2007 72 76
104. Y.K. Liu, and P.L. Tso The Optimal Diamond Wheels for Grinding Diamond Tools International Journal of Advanced Manufacturing Technology 22 5-6 2003 396 400
105. W.J. Liu, Z.J. Pei, and X.J. Xin Finite Element Analysis for Grinding and Lapping of Wire-sawn Silicon Wafers Journal of Materials Processing Technology 129 1-3 2002 2 9
106. J.H. Liu, Z.J. Pei, and G.R. Fisher Grinding Wheels for Manufacturing of Silicon Wafers: A Literature Review International Journal of Machine Tools and Manufacture 47 2007 1 13
107. Ch. Ludwig, and V. Thieme Feinschleifen in der Kleinserienfertigung sphärischer optischer Bauteile Feingerätetechnik 34 2 1985
108. H. Mairlot The Texture of Ground Glass Surface Industrial Diamond Review 2 1972 61 68
109. D.M. Marsh Plastic Flow in Glass Proceedings of the Royal Society of London, Series A, vol. 279 Burlington House, London 1964 420 435
110. E.R. Marsh, J.A. Couey, R.R. Vallance, and A.Y. Yi The Role of Crystallographic Orientation on the Forces Generated in Ultraprecision Grinding of Anisotropic Materials such as Monocrystalline Silicon International Journal of Manufacturing Technology and Management 12 2007 270 283
111. D.B. Marshall, B.R. Lawn, and R.F. Cook Microstructural Effects on Grinding of Alumina and Glass-ceramics Communications of the American Ceramic Society 70 6 1987 139 140
112. K. Matsumaru, A. Takata, and K. Ishizaki Advanced Thin Dicing Blade for Sapphire Substrate Science and Technology of Advanced Materials 6 2005 120 122
113. P.A. McKeown, and J. Loxham Some Aspects of the Design of High Precision Measuring Machines Annals of the CIRP 22 1 1973 139 141
114. P.A. McKeown Ultra-Precision Diamond Machining of Advanced Technology Components Journal of Materials and Manufacturing Processes 1 1 1986 107 132
115. Meyer LW (2006) Einsatz von Temperatur-und Kraftsensoren in Schleifwerkzeugen. German Ph.D. Thesis, Universität Bremen.
116. M. Miyashita 1st Annual Precision Engineering Conference North Carolina State University, Raleigh, USA 1985
117. P. Molly, M.G. Schinker, and W. Doell Brittle Fracture Mechanisms in Single Point Glass Abrasion Proceedings of the SPIE 802 1987 81 88
118. P. Morantz, P. Shore, D. Stephenson, R. May-Miller, and R. Read From Tetrahedral to Box: Design Philosophy Behind the Cranfield Big OptiX System Proceedings of the 5th Euspen International Conference Montpellier, France 2005
119. P. Morantz, P. Shore, X. Luo, and I. Baird Control Strategy of the Big Optix Grinding Machine Proceedings of the 6th euspen International Conference, vol. 1 Baden bei Wien, Austria 2006 257 260
120. O. Mohr Welche Umstände bedingen die Elastizitätsgrenze und den Bruch eines Materials Zeitschrift des Vereins deutscher Ingenieure 24 1900 1524 1530 and 1572-1577
121. M. Nakao, and Y. Hatamura Development of an Intelligent Face Grinding Machine to Fabricate Ultraflat Surfaces on Thin Brittle Substrates Annals of the CIRP 45 1 1996 397 400
122. Y. Namba, M. Abe, and A. Kobayashi Ultraprecision Grinding of Optical Glasses to Produce Super-Smooth Surfaces Annals of the CIRP 42 1 1993 417 420
123. Y. Namba, R. Wada, A. Tsuboi, and K. Okamura Ultra Precision Grinder Having a Glass-Ceramic Spindle of Zero Thermal Expansion Annals of the CIRP 38 1 1989 331 334
124. B.K.A. Ngoi, and P.S. Sreejith Ductile Regime Finish Machining-A Review International Journal of Manufacturing Technology 16 2000 547 550
125. D.J. Nicholas, and J.E. Boon The Generation of High Precision Aspherical Surfaces in Glass by CNC Machining Journal of Physics. D: Applied Physics 14 1981 593 600
126. H. Ohmori State of the Art in ELID Assisted Grinding-Suitability for Different Material Presentation of H. Ohmori, ELID workshop at the Fraunhofer IPT Aachen May 31 2002
127. H. Ohmori, N. Ebizuka, S. Morita, and Y. Yamagata Ultraprecision Micro-Grinding of Germanium Immersion Grating Element for Mid-infrared Super Dispersion Spectrograph Annals of the CIRP 50 1 2001 221 224
128. H. Ohmori, K. Katahira, M. Mitzutani, and J. Komotori Investigation on Color-Finishing Process Conditions for Titanium Alloy Applying a New Electrical Grinding Process Annals of the CIRP 53 1 2004 455 458
129. H. Ohmori, K. Katahira, Y. Uehara, and W. Lin ELID-Grinding of Microtool and Applications to Fabrication of Microcomponents International Journal of Nanotechnology 41 2 2002 193 204
130. H. Ohmori, W. Lin, K. Katahira, M. Mizutani, T. Naruse, Y. Uehara, Y. Watanabe, Y. Kameyama, Y. Hachisu, K. Maekawa, C. Sasaki, N. Itoh, K. Yoshida, S. Hiraj, H. Kasuga, T. Mishima, M. Asami, N. Mitsuishi, and T. Matsuzawa Developmental History and Variation of Precision and Efficient Machining Assisted with Electrolytic Process Principle and Applications Proceedings of the 1st International ELID Grinding Conference Changsha, China 2008 1 5
131. H. Ohmori, and T. Nakagawa Analysis of Mirror Surface Generation of Hard and Brittle Materials by ELID (Electrolytic In-Process Dressing) Grinding with Superfine Grain Metallic Bond Wheels Annals of the CIRP 44 1 1995 287 290
132. H. Ohmori, S. Yin, W. Lin, Y. Uehara, S. Morita, M. Asami, and M. Ohmori Development on Micro Precision Truing Method of ELID-Grinding Wheel (1st Report: Principle and Fundamental Experiments) Key Engineering Materials 291-292 2005 207 212 (Pubitemid 46805965)
133. N.S. Ong, and S.K. Oen Partial-Ductile Grinding and Reduces Polishing for Ophthalmic Glass Molds Materials and Manufacturing Processes 14 5 1999 725 739
134. H. Onikura, R. Inoue, K. Okuno, and O. Ohnishi Fabrication of Electroplated Micro Grinding Wheels and Manufacturing of Microstructures with Ultrasonic Vibration Key Engineering Materials 238-239 2003 9 14
135. Pähler D (2009) Rotational Grinding of Silicon Wafers. German Ph.D. Thesis, Rheinisch-Westfälische Technische Hochschule Aachen.
136. D. Pähler, D. Schneider, and M. Herben Nondestructive Characterization of Sub-surface Damage in Rotational Ground Silicon Wafers by Laser Acoustics Microelectronic Engineering 84 2007 340 354
137. Pahl F (1985) Kugelschleifen optischer Gläser. German Ph.D. Thesis, Rheinisch-Westfälische Technische Hochschule Aachen.
138. G. Pahlitzsch, and J. Böckem Einfluß der Einstellgrö ßen beim Flachschleifen von optischem Glas mit Diamanttopfschleifscheiben Industrial Diamond Review 7 1972 138 142
139. G. Pahlitzsch, and J. Böckem Schleifbarkeit optischer Gläser beim Flachschleifen mit Diamant-Topfschleifscheiben Industrial Diamond Review 7 1973 157 167
140. G. Pahlitzsch, and J. Böckem Flachschleifen von optischem Glas mit Diamant-Topfschleifscheiben unterschiedlicher Bindung Industrial Diamond Review 7 1973 200 207
141. Z.J. Pei, S.R. Billingsley, and S. Miura Grinding Induced Subsurface Cracks in Silicon Wafers International Journal of Machine Tools and Manufacture 39 1999 1103 1116
142. Z.J. Pei, G.R. Fisher, M. Bhagavat, and S. Kassir A Grinding Based Manufacturing Method for Silicon Wafers: An Experimental Investigation International Journal of Machine Tools and Manufacture 45 2005 1140 1151
143. Z.J. Pei, and A. Strasbaugh Fine Grinding of Silicon Wafers International Journal of Machine Tools and Manufacture 41 2001 659 672
144. Z.J. Pei, X.J. Xin, and W. Liu Finite Element Analysis for Grinding of Wire-sawn Silicon Wafers: A Designed Experiment International Journal of Machine Tools and Manufacture 43 2003 7 16
145. K. Peter Sprödbruch und Mikroplastizität von Glas in Eindruckversuchen Glastechnische Berichte 15 1964 303 345
146. G.J. Pietsch, and M. Kerstan Simultaneous Double-disk Grinding Machining Process for Flat Low-damage and Material Saving Silicon Wafer Substrate Manufacturing Proceedings of the 2nd euspen International Conference, vol. 2 Turin, Italy 2001 644 648
147. G.J. Pietsch, and M. Kerstan Kinematics and Application of Simultaneous Double-disk Grinding Proceedings of the 5th International Euspen Conference, vol. 1 Aachen, Germany 2003 113 116
148. G.J. Pietsch, and M. Kerstan Understanding Simultaneous Double-disk Grinding: Operation Principle and Material Removal Kinematics in Silicon Wafer Planarization Precision Engineering 29 2005 189 196
149. F.W. Preston The Structure of Abraded Glass Surfaces Transactions of the Optical Society 23 1921-1922 141 164
150. K.E. Puttick, M.R. Rudman, K.J. Smith, A. Franks, and L. Lindsey Single-Point Diamond Turning of Glasses Proceedings of the Royal Society of London, Series A 1989 19 30
151. M. Rahman, A. Sentil Kumar, and I. Biswas A Review of Electrolytic In-Process Dressing (ELID) Grinding Key Engineering Materials 404 2009 45 59
152. K. Ramesh, H. Huang, L. Yin, and J. Zhao Microgrinding of Deep Micro Grooves with High Table Reversral Speed International Journal of Machine Tools and Manufacture 44 2004 39 49
153. K. Rickens, D. Grimme, and E. Brinksmeier Deterministic Machining of Brittle Materials Applying Engineered Diamond Wheels Proceedings of the 6th euspen International Conference, vol. 2 Baden bei Wien, Austria 2006 216 219
154. Rickens K (2010) Deterministisches Schleifen optischer Gläser mit grobkörnigen Diamantschleifscheiben. German Ph.D. Thesis, Universität Bremen.
155. O. Riemer Diamond Machining of Micro-Structures Proceedings of the 1st International Conference on Nanomanufacturing Singapore 2008 329 330
156. J. Rohn Weiterentwicklung der Planparallelbearbeitung mit Planetenkinematik Jahrbuch Schleifen, Honen, Läppen und Polieren 61 2003 119 127
157. J. Ruckman, E. Fess, and Y. Li Contour Mode Deterministic Micro-Grinding Proceedings of the 14th Annual Meeting of the ASPE, vol. 20 Monterey, USA 1991 542 546
158. S. Sakka, and J.D. Mackenzie High Pressure Effects on Glass Journal of Non-crystalline Solids 1 1969 107 142
159. M. Saeki, T. Kuriyagawa, J.-S. Lee, and K. Syoji Machining of Aspherical Opto-Device Parallel Grinding Method Proceedings of the 16th Annual Meeting of the ASPE, vol. 25 Crystal City, USA 2001 433 436
160. M.G. Schinker, and W. Döll Plasticity and Fracture of Inorganic Glasses at High Speed Grinding Journal de physique: 1982 603 606
161. M.G. Schinker, and W. Döll Untersuchung zur Optimierung des Materialabtrages und der Oberflächenqualität durch schnellstschneidende Diamanten in Glas 1982 Abschlussbericht zum Forschungsvorhaben AiF Nr. 4613, Freiburg
162. M.G. Schinker, and W. Döll Basic Investigation into the High Speed Processing of Optical Glasses with Diamond Tools Proceedings of the SPIE 381 1983 32 38
163. M.G. Schinker, and W. Döll C.R. Kurkjian, Plasticity and Fracture Induced by Scratching Optical Glasses at High Speed Strength of Inorganic Glass 1985 Plenum Publishing Corporation 115 133
164. M.G. Schinker, and W. Döll Turning of Optical Glasses at Room Temperature Proceedings of the SPIE 802 1987 70 80
165. M.G. Schinker Sub-Surface Damage Mechanisms at High-Speed Ductile Machining of Optical Glasses Journal of the International Society for Precision Engineering and Nanotechnology 13 3 1991 208 218
166. M.C. Shaw Precision Finishing Annals of the CIRP 44 1 1995 343 348
167. M.C. Shaw Principles of Abrasive Processing 1996 Calendon Press Oxford
168. Sherwood Jr. WJ (2003) Ceramic Bonded Abrasive. US Patent 20030041525.
169. T. Shibata, F. Shigeru, M. Eiji, and I. Masayuki Ductile-Regime Turning Mechanism of Single-crystal Silicon Precision Engineering 18/ 2-3 1996 129 137
170. Shore P (1995) Machining of Optical Surface in Brittle Materials Using an Ultra-precision Machine Tool. Ph.D. Thesis, Cranfield University.
171. P. Shore, C. Cunningham, D. DeBra, C. Evans, J. Hough, R. Gilmozzi, R. Hocken, H. Kunzman, P. Morantz, and X. Tonnellier Precision Engineering of Astronomy and Gravity Science Annals of the CIRP 2010
172. P. Shore, X. Luo, T. Jin, X. Tonnellier, P. Morantz, D. Stephenson, R. Collins, R. May-Miller, and R. Read Grinding Mode of the "BOX" Ultra Precision Free-form Grinder Proceedings of the 20th Annual Meeting of the ASPE Norfolk, USA 2006
173. P. Shore, P. Morantz, X. Lou, X. Tonnellier, R. Collins, A. Roberts, R. May-Miller, and R. Read Big OptiX Ultra Precision Grinding/Measuring System Proceedings of the SPIE 5965 2005 59650Q.1-59650Q.8
174. Sinhoff VR (1997) Feinbearbeitung optischer Gläser in der Kleinserie. German Ph.D. Thesis, Rheinisch-Westfälische Technische Hochschule Aachen.
175. A. Slocum, M. Basaran, R. Cortesi, and A.J. Hart Linear Motion Carriage with Aerostatic Bearings Preloaded by Inclined Iron Core Linear Electric Motor Precision Engineering 27 2003 382 394
176. K. Steffens, R. Kleinevoß, and N. Koch Schleifen polierfähiger Glaslinsen mit Diamant-Topfwerkzeugen Jahrbuch für Optik und Feinmechanik 1989 144
177. D.J. Stephenson, X. Sun, and C. Zervos A Study on ELID Ultra Precision Grinding of Optical Glass with Acoustic Emission International Journal of Machine Tools and Manufacturing 46 2006 1053 1063
178. G.F. Stoica, C. Capitanescu, and A.I. Biolan Wear Behavior of Thin Coatings Based on Diamond National Tribology Conference 2003 133 135
179. W.P. Sun, Z.J. Pei, and G.R. Fisher Fine Grinding of Silicon Wafers: Effects of Chuck Shape on Grinding Marks International Journal of Machine Tools and Manufacture 45 2005 673 686
180. X. Sun, D.J. Stephenson, O. Ohnishi, and A. Baldwin An Investigation into Parallel and Cross Grinding of BK7 Glass Precision Engineering 30 2005 145 153
181. H. Suzuki, T. Higuchi, M. Nishioka, T. Kitajima, A. Yui, S. Okuyama, H. Shibutani, and O. Horiuchi Precision Grinding of Micro Fresnel Shape and Precision Glass Molding of Micro Fresnel Lens Proceedings of the 16th Annual Meeting of the ASPE, vol. 25 Crystal City, USA 2001 437 440
182. H. Suzuki, T. Kitajima, S. Okuyama, K. Syoji, T. Kuriyagawa, and J. Yan Precision Grinding of Micro Aspherical Surface-Feasibility Study of 250 μm Aspherical Grinding Proceedings of the 13th Annual Meeting of the ASPE, vol. 18 Scottsdale, USA 1998 149 152
183. H. Suzuki, S. Kodera, and S. Hara Grinding of Micro Aspherical Surface Proceedings of the 10th Annual Meeting of the ASPE, vol. 12 Austin, USA 1995 183 186
184. K. Suzuki, T. Uematsu, and T. Nakagawa On-Machine Trueing/Dressing of Metal Bond Grinding Wheels by Electro-Discharge Machining Annals of the CIRP 36 1 1987 115 118
185. M.V. Swain Microfracture about Scratches in Brittle Solids Proceedings of the Royal Society A366 1979 575 597
186. K. Syoji Some Problems of Grinding in the 21st Century Journal of the Japan Society for Precision Engineering 45 1 2001 88 93
187. T. Tanaka, S. Esaki, K. Nishida, T. Nakajima, and K. Ueno Development and Application of Porous Vitrified Bonded Wheel with Ultrafine Diamond Abrasives Key Engineering Materials 257 258 2004 251 256
188. K. Tanaka, M. Fukuta, K. Suzuki, M. Iwai, T. Uematsu, and S. Mishiro Improvement of Grinding Performance in Ultra-precision Grinding of Lens Moulds by the Help of Megasonic Coolant International Journal of Manufacturing Technology and Management 9 1-2 2006 79 93
189. N. Taniguchi On the Basic Concept of Nano-Technology, Proceedings of the International Conference of Production Engineering, Tokyo, Part II Japan Society of Precision Engineering 1974 18 23
190. N. Taniguchi Current Status in, and Future Trends of Ultraprecision Machining and Ultrafine Materials Processing Annals of the CIRP 32 2 1983 573 582
191. H.K. Tönshoff, R. Egger, and S. Lehnicke Einsatz feinstkörniger Diamanttopfschleifscheiben zum Planschleifen von Halbleitersubstratscheiben Jahrbuch Schleifen, Honen, Läppen und Polieren 3 1997 310 320
192. H.K. Tönshoff, R. Egger, W. Longerich, and D. Preising Superfinshing Ceramics. Fine Grinding can Replace Lapping for a Superior Finish Manufacturing Engineering 2 1998 52 59
193. H.K. Tönshoff, and S. Lehnicke Grinding of Monocrystalline Silicon Wafers by Ultra-fine Grained Diamond Wheels Proceedings of the UME4/IPES9, vol. 2 1997 570 573
194. H.K. Tönshoff, and S. Lehnicke Sub-surface Damage Reduction of
195. S.B. Toh, and R. McPherson Fine Scale Abrasive Wear of Ceramics by a Plastic Cutting Process, Science of Hard Materials Institute Physics Conference Series 75 9 1986 856 871
196. Y.E. Tohme Grinding Aspheric and Freeform Micro-Optical Molds, Micro-machining Technology for Micro-Optics and Nano-Optics V and Microfabrication Process Technology XII M.-A. Maher, H.D. Stewart, J.-C. Chiao, T.J. Suleski, E.G. Johnson, G.P. Nordin, Proceedings of the SPIE 6462 2007 64620K.1-64620K.8
197. Tonnellier X (2009) Precision Grinding for Rapid Manufacturing of Large Optics. Ph.D. Thesis, Cranfield University.
198. ® Surfaces Laser Metrology and Machine Performance VIII, 8th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2007
199. D. Tracy Market Statistics Semiconductor Silicon Manufacturers Group SMG Executive Meeting 2008 SEMICON Japan Chiba
200. E. Uhlmann, and T. Ardelt Influence of Kinematics on the Face Grinding Process on Lapping Machines Annals of the CIRP 48 1 1999 281 284
201. E. Uhlmann, T. Ardelt, P. Stingl, C. Rußner, T. Magg, and A. Reiser Planschleifen mit Läppkinematik Industrial Diamond Review 33 1999 79 83
202. E. Uhlmann, and M. Kirchgatter Technologischer Nutzen von Schleifbelagsnutungen Vorteile teuer erkauft? wt Werkstatttechnik online 99 6 2009 390 395
203. P. Vanherck, and J. Peters Digital Axis of Rotation Measurements Annals of the CIRP 22 1 1973 135 136
204. V.C. Venkatesh, S. Izman, P.S. Vichare, T.T. Mon, and S. Murugan The Novel Bondless Wheel, Sperical Glass Chips and a New Method of Aspheric Generation Journal of Materials Processing Technology 167 2005 184 190
205. Y.H. Wang, M.Z. Zhao, and J.B. Zang Structure and Properties of Diamond Grits Coated with Corundum Micron Powder Key Engineering Materials 250 2003 94 98
206. M. Weck, P.A. McKeown, R. Bonse, and U. Herbst Reduction and Compensation of Thermal Errors in Machine Tools Annals of the CIRP 44 2 1995 589 598
207. M. Weck, and K.H. Schiefer Interaction of the Dynamic Behaviour between Machine Tool and Cutting Process for Grinding Annals of the CIRP 28 1 1979 281 286
208. A. Wenda Jahrbuch Schleifen, Honen, Läppen und Polieren 59 2000 273 284
209. W.J. Wills-Moren, and T. Wilson The Design and Manufacture of a Large CNC Grinding Machine for Off-axis Mirror Segments Annals of the CIRP 38 1 1989 529 533
210. P. Wolters, V.v. Mackensen, P. Longerich, P. Dennis, and D. Preising Feinschleifen ebener Flächen auf Maschinen mit Läppkinematik Jahrbuch Schleifen, Honen, Läppen und Polieren 58 1998 215 226
211. Y. Yamamoto, H. Maeda, H. Shibutani, H. Suzuki, and O. Horiuchi A Study on Constant-pressure Grinding with EPD Pellets Key Engineering Materials 257-258 2004 135 138
212. Y. Yamamoto, H. Suzuki, T. Moriwaki, T. Okino, Y. Hijikata, J. Roblee, and T. Miyashita Development of Cross and Parallel Mode Grinding Machine for High Na Aspherical Mold and Die Proceedings of the 21st Annual Meeting of the ASPE, vol. 39 Monterey, USA 2006 499 502
213. Y. Yamamoto, H. Suzuki, T. Okino, Y. Hijikata, T. Moriwaki, M. Fukuta, M. Nishioka, and Y. Kojima Ultra Precision Grinding of Micro Aspherical Surface-Development of a Three-Axes Controlled Single Point Inclined Grinding Method Proceedings of the 13th Annual Meeting of the ASPE, vol. 34 St. Louis, USA 2004 558 561
214. A.Y. Yi Optical Fabrication P.K. Mallick, Encyclopedia of Applied Physics 2003 Marcel Dekker Publishers
215. S. Yin, W. Lin, Y. Uehara, S. Morita, H. Ohmori, M. Asami, and M. Ohmori Development on Micro Precision Truing Method of ELID-Grinding Wheel (2nd Report: Application to Edge Sharpening of Large Wheel) Key Engineering Materials 291-292 2005 213 220
216. S. Yin, H. Ohmori, Y. Uehara, T. Shimizu, and W. Lin Micro V-grooves Grinding Technique of Large Germanium Immersion Grating Element for Mid-infrared Spectograph International Conference on Leading Edge Manufacturing in 21st Century 2003 223 228
217. S. Yoshida, and H. Ito The Present and Future of Ductile-Regime Grinding of Optical Parts Bulletin of Japan Society of Precision Engineering 24 1990 239 243
218. N. Yoshihara, J. Yan, and T. Kuriyagawa Development of Rubber-Bonded Grinding Wheel-Studies on Asperical Grinding Key Engeneering Materials 329 2007 465 470
219. J. Yoshioka, K. Koizumi, M. Shimuzu, H. Yoshikawa, M. Miyasahita, and A. Kanai Surface Grinding with Newly Developed Ultra Precision Grinding Machine 1982 SME Technical Paper, MR82-930
220. D. Youden Recent Developments in Diamond Turning Proceedings of the 3rd International Machine Tool Technical Conference Illinois, USA 1986
221. I. Zarudi, and L.C. Zhang Sub-surface Structure Change of Silicon after Ultra-precision Grinding International Symposium on Advances in Abrasive Technology (ISAAT97) 1997 33 37
222. L. Zhang, and I. Zarudi Understanding of the Chemical Effect on the Nano-wear Deformation in Monocrystalline Silicon Wear 225-229 1999 669 677 (Pubitemid 30112915)
223. X.H. Zhang, Z.J. Pei, and G.R. Fisher A Grinding-based Manufacturing Method for Silicon Wafers: Generation Mechanisms of Central Dimples on Ground Wafers International Journal of Machine Tools and Manufacture 46 2006 397 403
224. Q.L. Zhao, Y.C. Liang, D. Stephen, and J. Corbett Surface and Subsurface Integrity in Diamond Grinding of Optical Glasses on Tetraform 'C' International Journal of Machine Tools and Manufacture 47 2007 2091 2097
225. Z. Zhong, and V.C. Venkatesh Semi-Ductile Grinding and Polishing of Ophthalmic Aspherics and Spherics Annals of the CIRP 44 1 1995 339 342
226. Z. Zhong Surface Finish of Precision Machined Advanced Materials Journal of Materials Processing Technology 122 2002 173 178
227. L.B. Zhou, H. Eda, and J. Shimizu State of the Art Technologies and Kinematical Analysis for One-stop Finishing of 300 mm Si Wafer Journal of Materials Processing Technology 129 2002 34 40
228. K.H. Zum Gahr Microstructures and Wear of Materials, Tribology Series vol. 10 1987 Elsevier Amsterdam/Oxford