Recent advances in mechanical micromachining

CIRP Annals - Manufacturing Technology

Volumn 55, Issue 2, 2006, Pages 745-768

  Dornfeld, D ^a   Min, S ^a   Takeuchi, Y ^b  

^a UNIVERSITY OF CALIFORNIA   (United States)

^b OSAKA UNIVERSITY   (Japan)

Author keywords

Machine tools; Micromachining; Modelling

Indexed keywords

COMPOSITE MICROMECHANICS; COMPUTER SOFTWARE; CUTTING TOOLS; MACHINE TOOLS; MACHINING; MODELS;

DESIGN ISSUES; MACHINING PROCESS; MECHANICAL MICRO-MACHINING; MICRO-STRUCTURAL EFFECTS; RECENT RESEARCHES; WORKPIECE;

MICROMACHINING;

EID: 40649119235     PISSN: 00078506     EISSN: 17260604     Source Type: Journal    
DOI: 10.1016/j.cirp.2006.10.006     Document Type: Article

References (221)

1. Taniguchi, N., 1983, Current Status in, and Future Trends of, Ultraprecision Machining and Ultrafine Materials Processing, CIRP Annals, 32/2:573-582.
2. Byrne, G., Dornfeld, D., Denkena, B., 2003, Advancing Cutting Technology, CIRP Annals, 52/2:483-507.
3. Masuzawa, T., Toenshoff, H.K., 1997, ThreeDimensional Micromachining by Machine Tools, CIRP Annals, 46/2:621-628.
4. Masuzawa, T., 2000, State of the Art of Micromachining, CIRP Annals, 49/2:473-488.
5. Alting, L., Kimura, F., Hansen, H.N., Bissacco, G., 2003, Micro Engineering, CIRP Annals, 52/2:635-657.
6. [6] Liu, X., DeVor, R.E., Kapoor, S.G., Ehmann, K.F., 2004, The Mechanics of Machining at the Microscale: Assessment of the Current State of the Science, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 126/4:666-678. (Pubitemid 40329873)
7. Ehmann, K.F., Bourell, D., Culpepper, M.L., Hodgson, T. J., Kurfess, T.R., Madou, M., Rajurkar, K., DeVor, R.E., 2005, International Assessment of Research and Development in Micromanufactuhng, WTEC Panel Report, World Technology Evaluation Center, Inc., Baltimore, M. A.
8. Backer, W.R., Marshall, E.R., Shaw, M.C., 1952, Size Effect in Metal Cutting, Transactions of the ASME, 74/1:61-71.
9. Boothroyd, G., Knight, W.A., 1989, Fundamentals of Machining and Machine Tools, 2nd ed., Marcel Dekker, New York.
10. Larson-Basse, J., Oxley, P.L.B., 1973, Effect of Strain Rate Sensitivity on Scale Phenomenon in Chip Formation, Proceedings of the 13th International Machine Tool Design and Research Conference, 209-216.
11. Nakayama, K., Tamura, K., 1968, Size Effect in MetalCutting Force, Journal of Engineering for IndustryTransactions of the ASME, 90/1:119-126.
12. Von Turkovich, B.F., Black, J. T., 1970, MicroMachining of Copper and Aluminum Crystals, Transactions of the ASME, 92 Ser B/1:130-134.
13. Moriwaki, T., Okuda, K., 1989, Machinability of Copper in Ultra-Precision Micro Diamond Cutting, CIRP Annals, 38/1:115-118.
14. Iwata, K., Moriwaki, T., Okuda, K., 1984, Ultra-High Precision Diamond Cutting of Copper, Memoirs of the Faculty of Engineering, Kobe University, 31:93-102.
15. [15] Iwata, K., Moriwaki, T., Okuda, K., 1987, Precision Machining of Stainless Steel with CBN Tool, Bulletin of the Japan Society of Precision Engineering, 21/2:134-135. (Pubitemid 17657818)
16. [16] Weule, H., Huntrup, V., Tritschler, H., 2001, MicroCutting of Steel to Meet New Requirements in Miniaturization, CIRP Annals, 50/1:61-64. (Pubitemid 32615754)
17. [17] Sumomogi, T., Nakamura, M., Endo, T., Goto, T., Kaji, S., 2002, Evaluation of Surface and Subsurface Cracks in Nanoscale-Machined Single-Crystal Silicon by Scanning Force Microscope and Scanning Laser Microscope, Materials Characterization, 48/2-3:141-145. (Pubitemid 34992230)
18. [18] Vogler, M.P., DeVor, R.E., Kapoor, S.G., 2004, On the Modeling and Analysis of Machining Performance in Micro-Endmilling, Part I: Surface Generation, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 126/4:685-694. (Pubitemid 40329875)
19. [19] Vogler, M.P., Kapoor, S.G., DeVor, R.E., 2004, On the Modeling and Analysis of Machining Performance in Micro-Endmilling, Part II: Cutting Force Prediction, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 126/4:695-705. (Pubitemid 40329876)
20. [20] Schmidt, J., Tritschler, H., Spath, D., Eisner, J., Huntrup, V., 2002, Requirements of an Industrially Applicable Microcutting Process for Steel MicroStructures, Microsystem Technologies, 8/6:402-408. (Pubitemid 35208854)
21. Furukawa, Y., Moronuki, N., 1988, Effect of Material Properties on Ultra Precise Cutting Processes, CIRP Annals, 37/1:113-116.
22. [22] Sato, M., Kato, Y., Tsutiya, K., 1979, Effects of Crystal Orientation on the Flow Mechanism in Cutting Aluminum Single Crystal, Transactions of the Japan Institute of Metals, 20/8:414-422. (Pubitemid 10428887)
23. Yuan, Z.J., Lee, W.B., Yao, Y.X., Zhou, M., 1994, Effect of Crystallography Orientation on Cutting Forces and Surface Quality in Diamond Cutting of Single Crystal, CIRP Annals, 43/1:39-42.
24. [24] Lee, W.B., Zhou, M., 1993, A Theoretical Analysis of the Effect of Crystallographic Orientation on Chip Formation in Micromachining, International Journal of Machine Tools & Manufacture, 33/3:439-447. (Pubitemid 23672164)
25. Zhou, M., Ngoi, KA, Yeo, S.H., 1999, Effect of Workpiece Material Properties on Microcutting Processes, Proceedings of the EUSPEN, Bremen, Germany, 404-407.
26. Ikawa, N., Shimada, S., Tanaka, H., 1992, Minimum Thickness of Cut in Micromachining, Nanotechnology, 3/1:6-9.
27. Stowers, I.F., Belak, J.F., Lucca, D.A., Komanduri, R., Moriwaki, T., Okuda, K., Ikawa, N., Shimada, S., Tanaka, H., Dow, T.A., Drescher, J.D., 1991, Molecular- Dynamics Simulation of the Chip Forming Process in Single Crystal Copper and Comparison with Experimental Data, Proceedings of the ASPE Annual Meeting, 100-104.
28. Kim, C.-J., Bono, M., Ni, J., 2002, Experimental Analysis of Chip Formation in Micro-Milling, Proceedings of the NAMRI/SME, West Lafayette, ID, USA, 1-8.
29. [29] Shimada, S., Ikawa, N., Tanaka, H., Ohmori, G., Uchikoshi, J., Yoshinaga, H., 1993, Feasibility Study on Ultimate Accuracy in Microcutting Using Molecular Dynamics Simulation, CIRP Annals, 42/1:91-94. (Pubitemid 23679081)
30. [30] Yuan, Z.J., Zhou, M., Dong, S., 1996, Effect of Diamond Tool Sharpness on Minimum Cutting Thickness and Cutting Surface Integrity in Ultraprecision Machining, Journal of Materials Processing Technology, 62/4:327-330. (Pubitemid 126366029)
31. Lucca, D.A., Seo, Y.W., 1993, Effect of Tool Edge Geometry on Energy Dissipation in Ultraprecision Machining, CIRP Annals, 42/1:83-88.
32. [32] Lucca, D. A., Rhorer, R.L., Komanduri, R., 1991, Energy Dissipation in the Ultraprecision Machining of Copper, CIRP Annals, 40/1:69-72. (Pubitemid 21681437)
33. [33] Bifano, T.G., Dow, T. A., Scattergood, R.O., 1991, Ductile-Regime Grinding. A New Technology for Machining Brittle Materials, Journal of Engineering for Industry, Transactions of the ASME, 113/2:184-189. (Pubitemid 21669748)
34. [34] Ueda, K., Sugita, T., Hiraga, H., 1991, J-lntegral Approach to Material Removal Mechanisms in Microcutting of Ceramics, CIRP Annals, 40/1:61-64. (Pubitemid 21681439)
35. Blake, P.N., Scattergood, R.O., 1990, Ductile-Regime Machining of Germanium and Silicon, Journal of the American Ceramic Society, 73/4:949-957.
36. Nakasuji, T., Kodera, S., Hara, S., Matsunaga, H., Ikawa, N., Shimada, S., 1990, Diamond Turning of Brittle Materials for Optical Components, CIRP Annals, 39/1:89-92.
37. [37] Egashira, K., Mizutani, K., 2002, Micro-Drilling of Monocrystalline Silicon Using a Cutting Tool, Precision Engineering, 26/3:263-268. (Pubitemid 34661677)
38. Fang, F.Z., Chen, L.J., 2000, Ultra-Precision Cutting for ZKN7 Glass, CIRP Annals, 49/1:17-20.
39. Shimada, S., Ikawa, N., Inamura, T., Takezawa, N., Ohmori, H., Sata, T., 1995, Brittle-Ductile Transition Phenomena in Microindentation and Micromachining, CIRP Annals, 44/1:523-526.
40. Takeuchi, Y., Sawada, K., Sata, T., 1996, Ultraprecision 3D Micromachining of Glass, CIRP Annals, 45/1:401-404.
41. Donaldson, R.R., Syn, C. K., Taylor, J.S., 1987, Minimum Thickness of Cut in Diamond Turning of Electroplated Copper, Presented at the 2nd Annual ASPE Conference, Columbus, OH, USA.
42. Donaldson, R.R., Syn, C.K., Taylor, J.S., Riddle, R. A., 1985, Chip Science: Basic Study of the Single-Point Cutting Process, Engineering Research Annual Report FY85, LLNL, UCID-19323085-2, 69-85.
43. Nishiguchi, T., Maeda, Y., Masuda, M., Sawa, M., Ito, R., 1988, Mechanism of Micro Chip Formation in Diamond Turning of Al-Mg Alloy, CIRP Annals, 37/1:117-120.
44. Jackson, M.J., 2005, Primary Chip Formation During the Micromachining of Engineering Materials, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 219/3:245-254.
45. Waldorf, D.J., DeVor, R.E., Kapoor, S.G., 1999, An Evaluation of Ploughing Models for Orthogonal Machining, Journal of Manufacturing Science and Engineering - Transactions of the ASME, 121/4:550-558.
46. Kountanya, R.K., Endres, W.J., 2001, A HighMagnification Experimental Study of Orthogonal Cutting with Edge-Honed Tools, Proceedings of the American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, New York, United States, 12:157-164.
47. Weinert, K., Kahnis, P., Petzoldt, V., Peters, C., 2005, Micro-Milling of Steel and Niti SMA, 55th CIRP General Assembly, STC-C section meeting presentation file, Antalya, Turkey.
48. [48] Kobayashi, A., Hoshina, N., Tsukada, T., Ueda, K., 1978, High Precision Cutting with a New Ultra Precision Spindle, CIRP Annals, 27/1:283-287. (Pubitemid 9392668)
49. Takasu, S., Masuda, M., Nishiguchi, T., 1985, Influence of Study Vibration with Small Amplitude Upon Surface Roughness in Diamond Machining, CIRP Annals, 34/1:463-467.
50. [50] Zhang, G.M., Kapoor, S.G., 1991, Dynamic Generation of Machined Surfaces, Part 2. Construction of Surface Topography, Journal of Engineering for Industry, Transactions of the ASME, 113/2:145-153. (Pubitemid 21669753)
51. [51] Zhang, G.M., Kapoor, S.G., 1991, Dynamic Generation of Machined Surfaces, Part 1. Description of a Random Excitation System, Journal of Engineering for Industry, Transactions of the ASME, 113/2:137-144. (Pubitemid 21669754)
52. [52] Lee, K., Dornfeld, D. A., 2002, An Experimental Study on Burr Formation in Micro Milling Aluminum and Copper, Transactions of the NAMRI/SME, 30:1-8. (Pubitemid 34745838)
53. Min, S., Lee, D., De Grave, A., De Oliveira Valente, CM., Lin, J., Dornfeld, D., 2004, Surface and Edge Quality Variation in Precision Machining of Single Crystal and Polycrystalline Materials, Proceedings of the 7th International Conference on Deburring and Surface Finishing, Berkeley, CA, USA, 341-350.
54. Lee, D., Deichmuller, M., Min, S., Dornfeld, D. A., 2005, Variation in Machinability of Single Crystal Material in Micromechanical Machining, Proceedings of the Nanoengineering Symposium 2005, Daejeon, Korea.
55. [55] Bissacco, G., Hansen, H.N., De Chiffre, L., 2005, Micromilling of Hardened Tool Steel for Mould Making Applications, Journal of Materials Processing Technology, 167/2-3:201-207. (Pubitemid 41162329)
56. Ahn, J., Lim, H., 1997, Side Burr Generation Model in Micro-Grooving, Proceedings of ASPE, 16:215-219.
57. Ahn, J., Lim, H., Son, S., 2000, Burr and Shape Distortion in Micro-Grooving of Non-Ferrous Metals Using a Diamond Tool, KSME International Journal, 14/11:1244-1249.
58. Schaller, T., Bohn, L., Mayer, J., Schubert, K., 1999, Microstructure Grooves with a Width of Less Than 50 Micro Cut with Ground Hard Metal Micro End Mills, Precision Engineering, 23/4:229-235.
59. [59] Sugawara, A., Inagaki, K., 1982, Effect of Workpiece Structure on Burr Formation in Micro-Drilling, Precision Engineering, 4/1:9-14. (Pubitemid 12504910)
60. [60] Ueda, K., Manabe, K., 1992, Chip Formation Mechanism in Microcutting of an Amorphous Metal, CIRP Annals, 41/1:129-132. (Pubitemid 23568255)
61. Moriwaki, T., Sugimura, N., Luan, S., 1993, Combined Stress, Material Flow and Heat Analysis of Orthogonal Micromachining of Copper, CIRP Annals, 42/1:75-78.
62. Fleischer, J., Kotschenreuther, J., Loehe, D., Gumbsch, P., Schulze, V., Delonnoy, L., Hochrainer, T., 2005, An Integrated Approach to the Modeling of Size-Effects in Machining with Geometrically Defined Cutting Edges, Proceedings of the CIRP Modeling Workshop, Chemnitz, Germany, 123-129.
63. Chuzhoy, L., DeVor, R.E., Kapoor, S.G., 2003, Machining Simulation of Ductile Iron and Its Constituents, Part 2: Numerical Simulation and Experimental Validation of Machining, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 125/2:192-201.
64. Chuzhoy, L., DeVor, R.E., Kapoor, S.G., Beaudoin, A.J., Bammann, D.J., 2003, Machining Simulation of Ductile Iron and Its Constituents, Part 1: Estimation of Material Model Parameters and Their Validation, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 125/2:181-191.
65. [65] Park, S., Kapoor, S.G., DeVor, R.E., 2004, Mechanistic Cutting Process Calibration Via Microstructure-Level Finite Element Simulation Model, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 126/4:706-709. (Pubitemid 40329877)
66. [66] Ikawa, N., Shimada, S., Tanaka, H., Ohmori, G., 1991, Atomistic Analysis of Nanometric Chip Removal as Affected by Tool-Work Interaction in Diamond Turning, CIRP Annals, 40/1:551-554. (Pubitemid 21681322)
67. lnamura, T., Suzuki, H., Takazawa, N., 1990, Cutting Experiments in a Computer Using Atomic Model of a Copper Crystal and a Diamond Tool, Journal of the JSPE, 56:1480-1486.
68. [68] Shimada, S., Ikawa, N., Ohmori, G., Tanaka, H., Uchikoshi, U., 1992, Molecular Dynamics Analysis as Compared with Experimental Results of Micromachining, CIRP Annals, 41/1:117-120. (Pubitemid 23568258)
69. Stowers, I.F., 1990, Molecular Dynamics Modeling Applied to Indentation and Metal Cutting, Informal Video Presentation at CIRP Meeting, Berlin, Germany.
70. lnamura, T., Takezawa, N., Kumaki, Y., 1993, Mechanics and Energy Dissipation in Nanoscale Cutting, CIRP Annals, 42/1:79-82.
71. lnamura, T., Takezawa, N., Taniguchi, N., 1992, Atomic-Scale Cutting in a Computer Using Crystal Models of Copper and Diamond, CIRP Annals, 41/1:121-124.
72. Shimada, S., Ikawa, N., Tanaka, H., Ohmori, G., Uchikoshi, J., 1993, Molecular Dynamics Analysis of Cutting Force and Chip Formation Process in Microcutting, Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 59/12:2015-2021.
73. Shimada, S., Ikawa, N., Tanaka, H., Uchikoshi, J., 1994, Structure of Micromachined Surface Simulated by Molecular Dynamics Analysis, CIRP Annals, 43/1:51-54.
74. Chandrasekaran, N., Khajavi, A.N., Raff, L.M., Komanduri, R., 1998, New Method for Molecular Dynamics Simulation of Nanometric Cutting, Philosophical Magazine B: Physics of Condensed Matter; Statistical Mechanics, Electronic, Optical and Magnetic Properties, 77/1:7-26.
75. [75] Komanduri, R., Chandrasekaran, N., Raff, L.M., 1998, Effect of Tool Geometry in Nanometric Cutting: A Molecular Dynamics Simulation Approach, Wear, 219/1:84-97. (Pubitemid 29120642)
76. Komanduri, R., Chandrasekaran, N., Raff, L.M., 1999, Orientation Effects in Nanometric Cutting of Single Crystal Materials: An MD Simulation Approach, CIRP Annals, 48/1:67-72.
77. Komanduri, R., Chandrasekaran, N., Raff, L.M., 2000, M.D. Simulation of Nanometric Cutting of Single Crystal Aluminum-Effect of Crystal Orientation and Direction of Cutting, Wear, 242/1:60-88.
78. Komanduri, R., Chandrasekaran, N., Raff, L.M., 2001, Molecular Dynamics Simulation of the Nanometric Cutting of Silicon, Philosophical Magazine B: Physics of Condensed Matter; Statistical Mechanics, Electronic, Optical and Magnetic Properties, 81/12:1989-2019.
79. [79] Komanduri, R., Chandrasekaran, N., Raff, L.M., 2001, MD Simulation of Exit Failure in Nanometric Cutting, Materials Science and Engineering A, 311/1-2:1-12. (Pubitemid 32541098)
80. Komanduri, R., Narulkar, R., Raff, L.M., 2004, Monte Carlo Simulation of Nanometric Cutting, Philosophical Magazine, 84/11:1155-1183.
81. [81] Cheng, K., Luo, X., Ward, R., Holt, R., 2003, Modeling and Simulation of the Tool Wear in Nanometric Cutting, Wear, 255/7-12:1427-1432. (Pubitemid 36990864)
82. Luo, X., Cheng, K., Guo, X., Holt, R., 2003, An Investigation on the Mechanics of Nanometric Cutting and the Development of Its Test-Bed, International Journal of Production Research, 41/7:1449-1465.
83. Rentsch, R., lnasaki, I., 1995, Investigation of Surface Integrity by Molecular Dynamics Simulation, CIRP Annals, 44/1:295-298.
84. [84] Fang, F.Z., Wu, H., Liu, Y.C., 2005, Modelling and Experimental Investigation on Nanometric Cutting of Monocrystalline Silicon, International Journal of Machine Tools and Manufacture, 45/15:1681-1686. (Pubitemid 41344910)
85. lnamura, T., Takezawa, N., Kumaki, Y., Sata, T., 1994, On a Possible Mechanism of Shear Deformation in Nanoscale Cutting, CIRP Annals, 43/1:47-50.
86. Dautzenberg, J.H., Kals, JAG., Van der Wolf, A.C.H., 1983, Forces and Plastic Work in Cutting, CIRP Annals, 32/1:223-227.
87. Dautzenberg, J.H., Veenstra, P.C., van der Wolf, A.C.H., 1981, Minimum Energy Principle for the Cutting Process in Theory and Experiment, CIRP Annals, 30/1:1-4.
88. Merchant, M.E., 1945, Mechanics of Metal Cutting Process, and Type 2 Chip, Journal of Applied Physics, 16/5:267-275.
89. Merchant, M.E., 1945, Mechanics of Metal Cutting Process, and Type 2 Chip, Journal of Applied Physics, 16/6:318-324.
90. [90] Kim, J.D., Kim, D.S., 1996, On the Size Effect of Micro-Cutting Force in Ultraprecision Machining, JSME International Journal, Series C, 39/1:164-169. (Pubitemid 126635273)
91. [91] Bao, W.Y., Tansel, I.N., 2000, Modeling Micro-EndMilling Operations. Part M: Tool Run-Out, International Journal of Machine Tools and Manufacture, 40/15:2175-2192. (Pubitemid 30940544)
92. [92] Bao, W.Y., Tansel, I.N., 2000, Modeling Micro-EndMilling Operations. Part III: Influence of Tool Wear, International Journal of Machine Tools and Manufacture, 40/15:2193-2211. (Pubitemid 30940545)
93. [93] Bao, W.Y., Tansel, I.N., 2000, Modeling Micro-EndMilling Operations. Part I: Analytical Cutting Force Model, International Journal of Machine Tools and Manufacture, 40/15:2155-2173. (Pubitemid 30940543)
94. Tlusty, J., MacNeil, P., 1975, Dynamics of Cutting Forces in End Milling, CIRP Annals, 24/1:21-25.
95. Vogler, M.P., DeVor, R.E., Kapoor, S.G., 2003, Microstructure-Level Force Prediction Model for MicroMilling of Multi-Phase Materials, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 125/2:202-209.
96. [96] Kim, C.-J., Mayor, J.R., Ni, J., 2004, A Static Model of Chip Formation in Microscale Milling, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 126/4:710-718. (Pubitemid 40329878)
97. Joshi, S.S., Melkote, S.N., 2004, An Explanation for the Size-Effect in Machining Using Strain Gradient Plasticity, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 126/4:679-684.
98. Klocke, F., Week, M., Fischer, S., Özmeral, H., Schroeter, R.B., Zamel, S., 1996, Ultrapräzisionsbearbeitung Und Fertigung Von Mikrokomponenten, Verfahren, IDR3:172-177.
99. Casstevens, J.M., 1983, Diamond Turning of Steel in Carbon-Saturated Atmospheres, Precision Engineering, 5/1:9-15.
100. [100]Evans, C., 1991, Cryogenic Diamond Turning of Stainless Steel, CIRP Annals, 40/1:571-575. (Pubitemid 21681317)
101. Brinksmeier, E., Glaebe, R., Osmer, J., 2006, Ultra-Precision Diamond Cutting of Steel Molds, CIRP Annals, 55/1 :to appear.
102. [102] Moriwaki, T., Shamoto, E., 1991, Ultraprecision Diamond Turning of Stainless Steel by Applying Ultrasonic Vibration, CIRP Annals, 40/1:559-562. (Pubitemid 21681320)
103. Moriwaki, T., Shamoto, E., 1995, Ultrasonic Elliptical Vibration Cutting, CIRP Annals, 44/1:31-34.
104. Schaller, T., Heckele, M., Ruprecht, R., Schubert, K., 1999, Microfabrication of a Mold Insert Made of Hardened Steel and First Molding Results, Proceedings of the ASPE, 20:224-227.
105. Schaller, T., Mayer, J., Schubert, K., 1999, Approach to a Microstructured Mold Made of Steel, Proceedings of the EUSPEN, Bremen, Germany, 1:238-241.
106. [106]Friedrich, CR., Vasile, M.J., 1996, Development of the Micromilling Process for High-Aspect-Ratio Microstructures, Journal of Microelectromechanical Systems, 5/1:33-38. (Pubitemid 126582173)
107. [107]Fahrenberg, J., Schaller, T., Bacher, W., El-Kholi, A., Schomburg, W.K., 1996, High Aspect Ratio MultiLevel Mold Inserts Fabricated by Mechanical Micro Machining and Deep Etch X-Ray Lithography, Microsystem Technologies 2/4:174-177. (Pubitemid 126479310)
108. Fleischer, J., Haupt, S., 2005, Microstructuring of Hardened Steels by Combining Laser Ablation and EDM - a Comparison with Micromilling, 55th CIRP General Assembly, STC-C section meeting presentation file, Antalya, Turkey.
109. Fleischer, J., Kotschenreuther, J., 2005, Manufacturing of Micro Molds by Conventional and Energy Assisted Processes, Proceedings of the 4M Conference, Research Center Karlsruhe, Karlsruhe.
110. Bissacco, G., Hansen, H.N., Tang, PT., Fugl, J., 2005, Precision Manufacturing Methods of Inserts for Injection Modling of Microfluidic Systems, Proceedings of the ASPE Spring Topical Meeting, Columbus, Ohio, USA, 57-63.
111. [111]Sawada, K., Kawai, T., Takeuchi, Y., Sata, T., 2000, Development of Ultraprecision Micro Grooving (Manufacture of V-Shaped Groove), JSME International Journal. Series C: Mechanical Systems, Machine Elements and Manufacturing, 43/1:170-176. (Pubitemid 30896327)
112. Kawai, T., Sawada, K., Takeuchi, Y., 2001, Ultra-Precision Micro Structuring by Means of Mechanical Machining, Proceedings of the 14th IEEE International Conference on Micro Electro Mechanical Systems, lnterlaken, Switzerland, 22-25.
113. Takeuchi, Y., Maeda, S., Kawai, T., Sawada, K., 2002, Manufacture of Multiple-Focus Micro Fresnel Lenses by Means of Nonrotational Diamond Grooving, CIRP Annals, 51/1:343-346.
114. Maeda, S., Takeuchi, Y., Sawada, K., Kawai, T., Sata, T., 2000, Creation of Ultraprecision Microgrooves Using Non-Rotational Cutting Tools, Journal of the JSPE, 66/9:1456-1460.
115. Takeuchi, Y., Murota, M., Kawai, T., Sawada, K., 2003, Creation of Flat-End V-Shaped Microgrooves by Non-Rotational Cutting Tools, CIRP Annals, 52/1:41-44.
116. Takeuchi, Y., Sawada, K., Kawai, T., 1997, Three-Dimensional Micromachining by Means of Ultraprecision Milling, Proceedings of the 9th Int. Prec. Eng. Seminar and 4th Int. Conf. on Ultraprecision in Manuf. Eng., Braunschweig, 596-599.
117. Sasaki, T., Takeuchi, Y., Kawai, T., Sakaida, Y., 2004, 5-Axis Control Ultraprecision Micromachining of Micro 3-D Body, Proceedings of the Spring Annual Meeting Of JSPE, 1075-1076.
118. Yu, Z.Y., Rajurkar, K.P., Tandon, A., 2004, Study of 3D Micro-Ultrasonic Machining, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 126/4:727-732.
119. Kumabe, J., 1979, Vibration Cutting, Jikkyou Publishing Co., Tokyo, Japan.
120. [120]Ohnishi, O., Onikura, H., 2003, Effects of Ultrasonic Vibration on Microdrilling into Inclined Surface, Journal of the JSPE, 69/9:1337-1341. (Pubitemid 43097145)
121. [121]Ohnishi, O., Onikura, H., Feng, J., Kanda, T., Morita, T., 1996, Effects of Ultrasonic Vibration on Machining Accuracy in Microdrilling, Journal of the JSPE, 62/5:676-680. (Pubitemid 126615864)
122. Egashira, K., Mizutani, K., Nagao, T., 2002, Ultrasonic Vibration Drilling of Microholes in Glass, CIRP Annals, 51/1:339-342.
123. Egashira, K., Masuzawa, T., 1999, Microultrasonic Machining by the Application of Workpiece Vibration, CIRP Annals, 48/1:131-134.
124. Fujino, M., Okamoto, N., Masuzawa, T., 1995, Development of Multi-Purpose Microprocessing Machine, Proceedings of the ISEM Xl, Lausanne, Switzerland, 613-620.
125. Langen, H.H., Masuzawa, T., Fujino, M., 1995, Modular Method for Microparts Machining and Assembly with Self-Alignment, CIRP Annals, 44/1:173-176.
126. Donaldson, R.R., Patterson, S.R., 1983, Design and Construction of a Large, Vertical Axis Diamond Turning Machine, Proceedings of SPIE - The International Society for Optical Engineering, 433:62-67.
127. [127]McKeown, P.A., Wills-Moren, W.J., Read, R.F.J., Modjarrad, H., 1986, Design and Development of a Large Ultra-Precision CNC Diamond Turning Machine, Advanced Manufacturing Processes, 1/1:133-157. (Pubitemid 16609160)
128. Toenshoff, H.K., Hesse, D., Mommsen, J., 1993, Micromachining Using Excimer Lasers, CIRP Annals, 42/1:247-251.
129. Weck, M., Hartel, R., Modemann, K., 1988, Performance Assessment in Ultraprecision Micromachining, CIRP Annals, 37/1:499-502.
130. [130]Furukawa, Y., Moronuki, N., Kitagawa, K., 1986, Development of Ultra Precision Machine Tool Made of Ceramics, CIRP Annals, 35/1:279-282. (Pubitemid 17471162)
131. [131]Takeuchi, Y., Sakaida, Y., Sawada, K., Sata, T., 2000, Development of a 5-Axis Control Ultraprecision Milling Machine for Micromachining Based on Non-Friction Servomechanisms, CIRP Annals, 49/1:295-298. (Pubitemid 30881766)
132. Sriyotha, P., Nakamoto, K., Sugai, M., Yamazaki, K., 2006, A Design Study on, and the Development of, a 5-Axis Linear Motor Driven Super-Precision Machine, CIRP Annals, 55/1 :to appear.
133. Moriwaki, T., Shamoto, E., Song, Y., Kohda, S., 2004, Development of a Elliptical Vibration Milling Machine, CIRP Annals, 53/1:341-344.
134. Shamoto, E., Moriwaki, T., 1994, Study on Elliptical Vibration Cutting, CIRP Annals, 43/1:35-38.
135. Shamoto, E., Moriwaki, T., 1999, Ultraprecision Diamond Cutting of Hardened Steel by Applying Elliptical Vibration Cutting, CIRP Annals, 48/1:441-444.
136. [136]Shamoto, E., Song, Y., Yoshida, H., Suzuki, N., Moriwaki, T., Kohda, S., Yamanishi, T., 2003, Development of Elliptical Vibration Cutting Machine by Utilizing Mechanical Vibrator, Journal of the JSPE, 69/4:542-543. (Pubitemid 43096423)
137. Shamoto, E., Suzuki, N., Moriwaki, T., Naoi, Y., 2002, Development of Ultrasonic Elliptical Vibration Controller for Elliptical Vibration Cutting, CIRP Annals, 51/1:327-330.
138. Hara, Y., Motonishi, S., Yoshida, K., 1990, A New Micro-Cutting Device with High Stiffness and Resolution, CIRP Annals, 39/1:375-378.
139. Subrahmanian, R., Ehmann, K.F., 2002, Development of a Meso-Scale Machine Tool (mMT) for Micro-Machining, Proceedings of the 2002 Japan-USA Symposium on Flexible Automation, Hiroshima, Japan.
140. Werkmeister, J., Slocum, A., 2003, Design and Fabrication of the Mesomill: A Five-Axis Milling Machine for Meso-Scaled Parts, Proceedings of the ASPE, 28:79-82.
141. [141] Brinksmeier, E., Malz, R., Riemer, O., 1996, Mikrozerspanung Duktiler Und Sproeder Werkstoffe in Optischer Qualitaet, VDI Berichte, /1276:229. (Pubitemid 126459771)
142. [142]Weck, M., Fischer, S., Vos, M., 1997, Fabrication of Microcomponents Using Ultraprecision Machine Tools, Nanotechnology, 8/3:145-148. (Pubitemid 127592915)
143. Schulze, V., Lohe, D., Wick, A., 1999, Influence of Heat Treatment State on Material Changes Close to Surface of Micromachined Steel SAE 1045, Proceedings of the EUSPEN, Bremen, Germany.
144. Spath, D., Hüntrup, V., 1999, Micro-Milling of Steel for Mold Manufacturing - Influences of Material, Tools and Process Parameters, Proceedings of the EUSPEN, Bremen, Germany.
145. Weinert, K., Guntermann, G., Schwietering, C., 1998, Mirofrä sbearbeitung Schwerzerspanbarer Werkstoffe, Werkstattstechnik 88, Heft 11/12:503-506.
146. Weule, H., Schmidt, J., Huntrup, V., Tritschler, H., 1999, Micromilling of Ferrous Materials, Production Engineering, 6/2:17-20.
147. [147] Vasile, M.J., Friedrich, C.R., Kikkeri, B., McElhannon, R., 1996, Micrometer-Scale Machining: Tool Fabrication and Initial Results, Precision Engineering, 19/2-3:180-186. (Pubitemid 126394614)
148. Adams, D.P., Vasile, M.J., Krishnan, A.S.M., 2000, Microgrooving and Microthreading Tools for Fabricating Curvilinear Features, Precision Engineering, 24/4:347-356.
149. [149]Adams, D.P., Vasile, M.J., Benavides, G., Campbell, A.N., 2001, Micromilling of Metal Alloys with Focused Ion Beam-Fabricated Tools, Precision Engineering, 25/2:107-113. (Pubitemid 32272181)
150. [150] Aoki, I., Takahashi, T., 1999, Micropattern Fabrication by Specially Designed Micro Tool, Proceedings of SPIE - The International Society for Optical Engineering, 3874:365-372. (Pubitemid 30554305)
151. [151] Egashira, K., Mizutani, K., 2003, Milling Using UltraSmall Diameter Ball End Mills Fabricated by Electrical Discharge Machining, Journal of the JSPE, 69/1:1449 1453. (Pubitemid 43097120)
152. [152]Friedrich, C., Coane, P., Goettert, J., Gopinathin, N., 1998, Direct Fabrication of Deep X-Ray Lithography Masks by Micromechanical Milling, Precision Engineering, 22/3:164-173. (Pubitemid 128676870)
153. Masuzawa, T., Fujino, M., 1990, Process for Manufacturing Very Fine Pin Tools, SME Technical Papers, MS90-307.
154. [154]Onikura, H., Ohnishi, O., Take, Y., 2000, Fabrication of Micro Carbide Tools by Ultrasonic Vibration Grinding, CIRP Annals, 49/1:257-260. (Pubitemid 30881774)
155. Ohmori, H., Katahira, K., Uehara, Y., Watanabe, Y., Lin, W., 2003, Improvement of Mechanical Strength of Micro Tools by Controlling Surface Characteristics, CIRP Annals, 52/1:467-470.
156. [156]Uhlmann, E., Schauer, K., 2005, Dynamic Load and Strain Analysis for the Optimization of Micro End Mills, CIRP Annals, 54/1:75-78. (Pubitemid 40948413)
157. Tansel, I., Rodriguez, O., Trujillo, M., Paz, E., Li, W., 1998, Micro-End-Milling - I. Wear and Breakage, International Journal of Machine Tools & Manufacture, 38/12:1419-1436.
158. [158]Tansel, I.N., Arkan, T.T., Bao, W.Y., Mahendrakar, N., Shisler, B., Smith, D., McCool, M., 2000, Tool Wear Estimation in Micro-Machining. Part I: Tool UsageCutting Force Relationship, International Journal of Machine Tools and Manufacture, 40/4:599-608. (Pubitemid 30534404)
159. Chen, W.S., Ehmann, K.F., 1994, Experimental Investigation on the Wear and Performance of MicroDrills, Proceedings of the 1994 International Mechanical Engineering Congress and Exposition, Tribology in Manufacturing Processes, Chicago, IL, USA, 30:145-157.
160. [160]Sugano, T., Takeuchi, K., Goto, T., Yoshida, Y., 1987, Diamond Turning of an Aluminum Alloy for Mirror, CIRP Annals, 36/1:17-20. (Pubitemid 17591982)
161. Fang, F.Z., Wu, H., Liu, X.D., Liu, Y.C., Ng, ST., 2003, Tool Geometry Study in Micromachining, Journal of Micromechanics and Microengineering, 13/5:726-731.
162. Godlinski, D., Grathwohl, G., Kuntz, M., 1999, Development of Ceramic Micro-Tools for Precision Machining, Proceedings of the EUSPEN, Bremen, Germany, 298-301.
163. Gaebler, J., Schaefer, L., Westermann, H., 2000, Chemical Vapour Deposition Diamond Coated Microtools for Grinding, Milling and Drilling, Diamond and Related Materials, 9/3:921-924.
164. Huang, B.-W., 2004, The Drilling Vibration Behavior of a Twisted Microdrill, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 126/4:719-726.
165. Chyan, H.C., Ehmann, K.F., 1998, Development of Curved Helical Micro-Drill Point Technology for MicroHole Drilling, Mechatronics, 8/4:337-358.
166. Chyan, H.C., Ehmann, K.F., 2002, Curved Helical Drill Points for Microhole Drilling, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216/1:61-75.
167. [167] Hinds, B.K., Treanor, G.M., 2000, Analysis of Stresses in Micro-Drills Using the Finite Element Method, International Journal of Machine Tools and Manufacture, 40/10:1443-1456. (Pubitemid 30864253)
168. Yang, Z., Li, W., Chen, Y., Wang, L., 1998, Study for Increasing Micro-Drill Reliability by Vibrating Drilling, Reliability Engineering & System Safety, 61/3:229-233.
169. [169]Yang, Z., Tan, Q., Wang, L., 2002, Principle of Precision Micro-Drilling with Axial Vibration of Low Frequency, International Journal of Production Research, 40/6:1421-1427. (Pubitemid 34593780)
170. [170]Friedrich, C., Coane, P., Goettert, J., Gopinathin, N., 1997, Precision of Micromilled X-Ray Masks and Exposures, Microsystem Technologies, 4/1:21-24. (Pubitemid 127522560)
171. [171]Kussul, E., Baidyk, T., Ruiz-Huerta, L., CaballeroRuiz, A., Velasco, G., Kasatkina, L., 2002, Development of Micromachine Tool Prototypes for Microfactories, Journal of Micromechanics and Microengineering, 12/6:795-812. (Pubitemid 35359542)
172. Liang, S.Y., 2005, Performance Evaluation of a MicroScale Vertical Milling Machine for Precision Manufacturing, 55th CIRP General Assembly, STC-C section meeting presentation file, Antalya, Turkey.
173. Kitahara, T., Ashida, K., Tanaka, M., Ishikawa, Y., Oyama, N., Nakazawa, Y., 1998, Microfactory and Microlathe, Proceedings of the International Workshop on Microfactories, 1-8.
174. Ashida, K., Mishima, N., Maekawa, H., Tanikawa, T., Kaneko, K., Tanaka, M., 2000, Development of Desktop Machining Microfactory, Proceedings of the Japan-USA Symposium on Flexible Automation, 175-178.
175. Maekawa, H., Komoriya, K., 2001, Development of a Micro Transfer Arm for a Micro Factory, Proceedings of the IEEE International Conference on Robotics and Automation, Seoul, Korea, 1444-1451.
176. Okazaki, Y., Kitahara, T., 2000, Micro-Lathe Equipped with Closed-Loop Numerical Control, Proceedings of the 2nd International Workshop on Microfactories, Switzerland, 87-90.
177. Tanaka, M., 2001, Development of Desktop Machining Microfactory, RIKEN Review, 34:46-49.
178. [178]Gaugel, T., Dobler, H., 2001, Advanced Modular Micro-Production System (AMMS), Proceedings of SPIE - The International Society for Optical Engineering, 4568:278-285. (Pubitemid 35187759)
179. Gaugel, T., Dobler, H., Bengel, M., Weis , C., Schlieber, J., 2002, Building a Mini-Factory from a Technology Construction Kit, Proceedings of the 3rd International Workshop on Microfactories, 5-8.
180. Verettas, I., Clavel, R., Codourey, A., 2003, Microfactory : Desktop Cleanrooms for the Production of Microsystems, Proceedings of the IEEE, 18-23.
181. Codourey, A., Honnegger, M., 2002, A Centralized Control System for Microfactories, 3rd International Workshop on Microfactories, 9-12.
182. Breguet, J.-M., Schmitt, C., Clavel, R., 2000, Micro/Nanofactory: Concept and State of the Art, Proceedings of SPIE - The International Society for Optical Engineering, 4194:1-12.
183. Mishima, N., 2003, Design of a Miniature Manufacturing System for Micro-Fabrication, Proceedings of the 10th ISPE International Conference on Concurrent Engineering, Madeira, Portugal, 1129-1135.
184. Okazaki, Y., Mishima, N., Ashida, K., 2004, Microfactory - Concept, History, and Developments, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 126/4:837-844.
185. [185]Otsuka, J., Hata, S., Shimokohbe, A., Koshimizu, S., 1998, Development of Ultraprecision Table for Ductile Mode Cutting, Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 64/4:546-551. (Pubitemid 128590922)
186. [186]Otsuka, J., Ichikawa, S., Masuda, T., Suzuki, K., 2005, Development of a Small Ultraprecision Positioning Device with 5 nm Resolution, Measurement Science and Technology, 16/11:2186-2192. (Pubitemid 41526892)
187. Holmes, M., Trumpet, D., Hocken, R., 1995, AtomicScale Precision Motion Control Stage (the Angstrom Stage), CIRP Annals, 44/1:455-460.
188. Kempf, C.J., Kobayashi, S., 1999, Disturbance Observer and Feedforward Design for a High-Speed Direct-Drive Positioning Table, IEEE Transactions on Control Systems Technology, 7/5:513-526.
189. Mizumoto, H., Yabuta, Y., ArN, S., Tazoe, Y., Kami, Y., 2005, A Picometer Positioning System Using Active Aerostatic Guideway, Proceedings of the International Conference on Leading Edge Manufacturing in 21st Century, Nagoya, Japan, 1009-1014.
190. Yagyu, T., Tanase, H., Moriyama, T., Matsui, T., 1995, Adaptive Control System for Multiple Micro-Machines, Proceedings of the Int. Joint Conf. of the Fourth IEEE Int. Conf. on Fuzzy Systems and the Second Int. Fuzzy Engineering Symposium, Yokohama, Japan, 2:863-868.
191. Noguchi, S., Tsukada, T., Sakamoto, A., 1995, Evaluation Method to Determine Radial Accuracy of High-Precision Rotating Spindle Units, Precision Engineering, 17/4:266-273.
192. [192]Ohishi, S., Matsuzaki, Y., 2002, Experimental Investigation of Air Spindle Unit Thermal Characteristics, Precision Engineering, 26/1:49-57. (Pubitemid 33148035)
193. [193]Yokoyama, K., 1998, Analysis of Deformation of AirSpindle Due to Centrifugal Force, Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 64/1:137-141. (Pubitemid 128589426)
194. Hargrove, S.K., Kusiak, A., 1994, Computer-Aided Fixture Design: A Review, International Journal of Production Research, 32/4:733-753.
195. [195]Qiao, Y., Bu, H., 2000, Investigation on Suction Force of Vacuum Pumps for Micro-Components, Vacuum, 56/2:123-128. (Pubitemid 30555862)
196. Zesch, W., Brunner, M., Weber, A., 1997, Vacuum Tool for Handling Microobjects with a Nanorobot, Proceedings of the IEEE International Conference on Robotics and Automation, Albuquerque, NM, USA, 2:1761-1766.
197. Codourey, A., Zesch, W., Buchi, R., Siegwart, R., 1994, High Precision Robots for Automated Handling of Micro Objects, Seminar on Handling and Assembly of Microparts, Vienna, Austria.
198. Bellouard, Y., Clavel, R., Gotthardt, R., Bidaux, J.-E., Sidler, T.A., 1998, New Concept of Monolithic Shape Memory Alloy Micro-Devices Used in Micro-Robotics, Proceedings of the Actuator 98, 6th International Conference on New Actuators, 499-502.
199. Sato, T., Koyano, K., Nakao, M., Hatamura, Y., 1993, Novel Manipulator for Microobject Handling as Interface between Micro and Human Worlds, Proceedings of the International Conference on Intelligent Robots and Systems, 1674-1681.
200. Koyano, K., Sato, T., 1996, Micro Object Handling System with Concentrated Visual Fields and New Handling Skills, Proceedings - IEEE International Conference on Robotics and Automation, 3:2541-2548.
201. Lee, Y., 2000, Monitoring and Planning for Open Architecture Manufacturing of Precision Machining Using Acoustic Emission, Ph.D. Dissertation, Mechanical Engineering, University of California, Berkeley, CA.
202. Moriwaki, T., 1995, Experimental Analysis of UltraPrecision Machining, International Journal of the Japan Society for Precision Engineering, 29/4:287-290.
203. Lee, D.E., Hwang, I., Valente, CM.O., Oliveira, J.F.G., Dornfeld, D.A, 2006, Precision Manufacturing Process Monitoring with Acoustic Emission, International Journal of Machine Tools and Manufacture, 46/2:176-188.
204. Dornfield, D.A, Lee, Y., Chang, A., 2003, Monitoring of Ultraprecision Machining Processes, International Journal of Advanced Manufacturing Technology, 21/8:571-578.
205. Umeda, A., 1996, Review on the Importance of Measurement Technique in Micromachine Technology, Proceedings of SPIE - The International Society for Optical Engineering, 2880:26-38.
206. McGeough, J.A, 2002, Micromachining of Engineering Materials, Marcel Dekker, New York.
207. Howard, L.P., Smith, ST., 1994, Metrological Constant Force Stylus Profiler, Review of Scientific Instruments, 65/4 pt 1:892-901.
208. [208]Masuzawa, T., Hamasaki, Y., Fujino, M., 1993, Vibroscanning Method for Nondestructive Measurement of Small Holes, CIRP Annals, 42/1:589-592. (Pubitemid 23678964)
209. [209] Kim, B., Masuzawa, T., Bourouina, T., 1999, Vibroscanning Method for the Measurement of MicroHole Profiles, Measurement Science and Technology, 10/8:697-705. (Pubitemid 30876180)
210. [210] Miyoshi, T., Takaya, Y., Saito, K., 1996, Micromachined Profile Measurement by Means of Optical Inverse Scattering Phase Method, CIRP Annals, 45/1:497-500. (Pubitemid 126601496)
211. Kim, S.-W., Rhee, H.-G., Chu, J.-Y., 2003, Volumetric Phase-Measuring Interferometer for ThreeDimensional Coordinate Metrology, Precision Engineering, 27/2:205-215.
212. Pril, W.O., Struik, K.G., Schellekens, P.H.J., 1997, Development of a 2D Probing System with Nanometer Resolution, Proceedings of ASPE, 16:438-442.
213. Vermeulen, M.M.P.A., Rosielle, P.C.J.N., Schellekens, P.H.J., 1998, Design of a High-Precision 3D-Coordinate Measuring Machine, CIRP Annals, 47/1:447-450.
214. Kramar, J.A, Jun, J.S., Penzes, W.B., Scire, F.E., Teague, E.C., Villarrubia, J.S., 1999, Grating Pitch Measurements with the Molecular Measuring Machine, Proceedings of SPIE - The International Society for Optical Engineering, 3806:46-53.
215. Peggs, G.N., Lewis, A.J., Oldfield, S., 1999, Design for a Compact High-Accuracy CMM, CIRP Annals, 48/1:417-420.
216. Shiozawa, H., Fukutomi, Y., Ushioda, T., Yoshimura, S., 1998, Development of Ultra-Precision 3D-CMM Based on 3-D Metrology Frame, Proceedings of ASPE, 18:15-18.
217. Jäger, G., Manske, E., Hausotte, T., Büchner, H.-J., 2000, Laserinterferometrische Nanomessmaschinen, VDI Berichte, 1530 (Sensoren und Messsysteme 2000), VDI Verlag GmbH, Düsseldorf:271-278.
218. [218]Brand, U., Cao, S., Kleine-Besten, T., Hoffmann, W., Schwenke, H., Butefisch, S., Buttgenbach, S., 2002, Recent Developments in Dimensional Metrology for Microsystem Components, Microsystem Technologies, 8/1:3-6. (Pubitemid 34555007)
219. Cao, S., Hassler-Grohne, W., Brand, U., Gao, S., Wilke, R., Buttgenbach, S., 2002, A Three Dimensional Measurement System with Micro Tactile Sensor, Proceedings of SPIE - The International Society for Optical Engineering, 4902:52-59.
220. Grigg, D., Felkel, E., Roth, J., De Lega, X.C., Deck, L., De Groot, P., 2004, Static and Dynamic Characterization of MEMS and MOEMS Devices Using Optical Interference Microscopy, Proceedings of SPIE - The International Society for Optical Engineering, 5455:429-435.
221. [221]Otsuka, J., Ichikawa, S., Yamaguchi, Y., 2003, Development of Small Ultraprecision Displacement Sensor and Small Ultraprecision Positioning Device with 1 nm Resolution, Journal of the JSPE, 69/10:1428-1433. (Pubitemid 43097116)