Micro engineering

CIRP Annals - Manufacturing Technology

Volumn 52, Issue 2, 2003, Pages 635-657

  Alting, L ^a   Kimura, F ^b   Hansen, H N ^a   Bissacco, G ^a  

^a TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

^b UNIVERSITY OF TOKYO   (Japan)

Author keywords

Micro engineering; Process and production development; Product design and development

Indexed keywords

MICROELECTRONIC PROCESSING; PROCESS ENGINEERING; PRODUCT DESIGN; PRODUCT DEVELOPMENT; PRODUCTION ENGINEERING; TECHNOLOGICAL FORECASTING;

MICRO ENGINEERING; MICRO FACTORIES; MICRO PRODUCTS;

RAPID PROTOTYPING;

EID: 0347090508     PISSN: 00078506     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0007-8506(07)60208-X     Document Type: Article

References (127)

1. Mounier E., 2002, MEMS, the alternative semiconductor business, Proc. of the 3rd Euspen international conference, Eindhoven, Netherlands, p.391-394.
2. www.nexus-mems.com
3. Menz W. et al, 2002, Non-conventional technologies for fabrication of microsystems, Proc. of the 3rd Euspen international conference, Eindhoven, Netherlands, p.3-6.
4. Masuzawa, T., 2000, State of the art of micromachining, Annals of the CIRP, 49/2:473-488.
5. Corbett J. et al, 2000, Nanotechnology: International developments and emerging products, Annals of the CIRP 49/2:523-546.
6. Geiger M. et al, 2001, Microforming, Annals of the CIRP, 50/2:445-462.
7. Van Brussel H. et al, 2000, Assembly of microsystems, Annals of the CIRP, 49/2:451-472.
8. MacGeough J.A. et al, 2001, Electroforming process and application to micro/macro manufacturing, Annals of the CIRP, 50/2:499-514.
9. Gower M, Rizvi N., 2000, Applications of laser ablation to microengineering, Proc. of SPIE, High-power laser ablation III, 4065:452-460.
10. Dong L., Arai F., Fukuda T., 2002, 3D nanoassembly of carbon nanotubes through nanorobotic manipulations, Proc. of the 2002 IEEE international conference on robotics and automation, p.1477-1482.
11. Geiger W. et al, 2001, Decoupled microgyros and the design principle DAVED, Proc. of the 14th IEEE International conference on micro electro mechanical systems, p.170-173.
12. Tang P.T. et al, 2000, Fabrication of microcomponents by electrochemical manufacturing: advenced feed-through metallisation on silicon and nickel micromechanical resonators, Proc. of the 1st Euspen topical conference on fabrication and metrology in nanotechnology, Copenhagen, Denmark, p.107-113.
13. Belloy E., Sayah A., Gijs M.A.M., 2002, Micromachining of glass inertial sensors, Journal of microelectromechanical systems, Vol. 11, No. 1, p. 85-89.
14. Ghantasala M.K. et al, 2000, Microengineering of magnetic bearings and actuators, Proc. of SPIE Vol. 3990:294-303.
15. Toda R. et al, 2002, Electrostatically levitated spherical 3-axis accelerometer, Micro electro mechanical systems, 2002. The fifteenth IEEE international conference, p.710-713.
16. Toda R. et al, 2001, Accelerometer based multi-axis electro-static servo, Tech. Digest of the 18th Sensor Symposium IEEJ.
17. Mai T.-A., Nguyen N.-T., 2002, Fabrication of micropumps with Q-switched Nd:YAG-lasers, Proc. of SPIE, Vol. 4426:195-202.
18. Varadan V.K., 2001, MEMS and NEMS based smart devices and systems, Proc. of SPIE, 4591: 28-38.
19. Breguet J.-M., Clavel R., 1998, Stick and slip actuators:design, control, performances and applications, Proc. of the IEEE international symposium on micromechatronics and human science, p.89-95.
20. Dellmann L., Racine G.-A., de Roij N.F., 2000, Micromachined piezoelectric elastic force motor (EFM), The 13th annual international conference on micro electro mechanical systems MEMS 2000, p.52-55.
21. Mekid S., 2002, A New generation of state-of-the-art piezoelectric ultrasonic micro-motors. Proc. of 3rd Euspen international conference, Eindhoven, Netherlands, p. 175-178.
22. Konishi S. et al, 2002, Vertical motion microactuator based on the concept of eclia, Micro electro mechanical systems 2002. The fifteenth IEEE international conference, p. 602-605.
23. Hsu K.Y., Lin S.H., 2001, Holographic memories for optical interferometers, Proc. of the 4th Pacific Rim conference on lasers and electro-optics, Volume: 2, p. II694-II695.
24. Masuzawa T. et al, 2002, Laser beam machining of microlenses by hole area modulation (HAM) method, Proc. of the 3rd Euspen international conference, Eindhoven, Netherlands, p. 395-398.
25. Kim S.-G., Shi Y., Jeon Y. 2002, Design of micro-photonic beam steering systems, Annals of the CIRP, 51/1:335-338.
26. Kim S.-G. et al., 2000, Design of microactuator array against the coupled nature of microelectromechanical systems (MEMS) processes, Annals of the CIRP, 49/1:101-104.
27. Kim S.G. et al., 1997, Micromachined thin-film mirror array for reflective light modulation, Annals of the CIRP, 46/1:455-458.
28. Kamisuki S. et al, 2000, A high resolution electrostatically driven commercial inkjet head, Proceedings of the IEEE thirteenth annual international conference on micro electro mechanical systems (MEMS) 2000, p. 793-798.
29. Heeren T., 2002, Mechatronic alignment of color images in a high volume, high speed color printer, Proc. of the 3rd Euspen international conference, Eindhoven, Netherlands, p.67-70.
30. Brinksmeier E. et. al, 2001, Machining of precision parts and microstructures, Proc. of the 10th ICPE, p.1-9.
31. Wallrabe U. et al, 1996, Power characteristics of 3D operated microturbines for minimally invasive therapy, Proc. of the IEEE 9th annual international workshop on micro electro mechanical systems, MEMS '96, p. 462-466.
32. Kudla L. et al., 2002, Fabrication of miniature cutters for eye surgical operations, Proc. of the 3rd Euspen international conference, Eindhoven, Netherlands, p.407-410.
33. Härtig F., Schwenke H., Weiskirch C., 2002, Messung von Mikroverzahnung (in German), VDI-Berichte 1673, p. 247-257.
34. Ulrich K.T., Eppinger S.D., 1995, Product design and development, McGraw-Hill, New York, USA.
35. Tjalve E., 1976, Systematic design of industrial products (in Danish), Akademisk Forlag, Copenhagen, Denmark.
36. Rodenacker W.G., 1970, Methodisches Konstruiren (in German), Springer Verlag, Berlin.
37. Senturia S.D, 2001, Microsystem design, Kluwer Academic Publishers, Boston, USA.
38. Meso and Micro Scale Manufacturing, Presentations and material from a NSF/NIST workshop, May 1999 (provided by R.J. Hocken).
39. Yoshikawa H., 1989, Design philosophy: the state of the art, Annals of the CIRP 38/2:579-586.
40. Schmekel H., 1989, Functional models and design solutions, Annals of the CIRP 38/1:129-132.
41. Büttgenbach, S. et al., 2002, CAD environment for silicon micromachining, Proceedings of the 47. Int. Wiss. Kolloqium, TU Ilmenau, September 23-26.
42. Büttgenbach S., 2002, Design and fabrication of silicon micro components, 13th Int. Symposium on micromechatronics and human science, Nagoya, Japan.
43. Suh N.P., 1990, The principles of design, Oxford University Press.
44. ISO 406, 1990, Technical drawings - tolerancing of linear and angular dimensions. (Currently under revision)
45. ISO 129, 1986, Technical drawings - Dimensioning - General principles. (Currently under revision)
46. ISO 1101, 1985, Technical drawings - Geometrical tolerancing - Tolerances of form, orientation, location and run-out. (Currently under revision)
47. Weckenmann A. et al., 2000, Studies on new tolerancing rules for micro- and nanotechnology, Proc. of the 1st Euspen topical conference on fabrication and metrology in nanotechnology, Copenhagen, Denmark, p.214-221.
48. Weckenmann A. et al., 2001, Tolerancing of micromethanical-monolithic components, Proc. of the 2nd Euspen international conference, Turin, Italy, p. 1-4.
49. Engel U., Tiesler N., Eckstein R., 2001, Microparts - a challenge for forming technology, Proc. of the 3rd international conference on industrial tools, Slovenia, p. 31-39.
50. Jonsmann J., Sigmund O., Bouwstra S 1999, Multi degrees of freedom electro-thermal microactuators, Transducers'99, p. 1372-1375.
51. Sigmund O., 2001, Design of Multiphysics actuators using topology optimization - Part I: One-material structures, Computer methods in applied mechanics and engineering, Vol. 190 No. 49-50, p. 6577-6604.
52. Sigmund O., 2001, Design of multiphysics actuators using topology optimization - Part II: two-material structures, Computer methods in applied mechanics and engineering, Vol. 190 No. 49-50, p. 6605-6627.
53. Bendsøe M.P., Sigmund O., 2003, Topology optimization - theory, methods and applications, Springer Verlag, Berlin Heidelberg.
54. Büttgenbach S. et al., 2001, Computational synthesis of lithographic mask layouts for silicon microcomponents, Proc. of SPIE Vol. 4407, p. 126-134.
55. Meusen W., Reynaerts D., Van Brussel H., 2002, A CAD-tool for the design and manufacturing of microstructures based on micro-EDM, Proc. of the 3rd Euspen international conference, Eindhoven, Netherlands, p. 447-450.
56. Rajurkar K.P., Yu Z.Y., 2000, 3D micro-EDM using CAD/CAM, Annals of the CIRP, 49/1:127-130.
57. Fleckenstein M., Schmidt M., Eßer G., 1998, The application of lasers in micro electronics manufacturing, Chip scale review magazine (editor): Technical proceedings and presentations of the chip scale international (CSI) Europe '98 Weinheim (Germany), 8./9. September 1998.
58. Eßer G., 2002, Laserstrahlunterstützte Erzeugung metallischer Leiterstrukturen auf Thermoplastsubstraten für die MID-Technik (in German), Meisenbach Verlag, Bamberg, Germany.
59. Engel U., Messner A., Geiger M., 1996, Advanced concept for the FE-simulation of metal forming processes for the production of micropars, Proc. of the 5th international conference on the technology of plasticity (ICTP), Vol. II, p. 903-906.
60. Geiger M., Messner A. Engel U., 1997, Production of microparts - size effects in bulk metal forming, similarity theory, Production Engineering 4-1, pp.55-58.
61. N. Ikawa et al., 1991, An atomistic analysis of nanometric chip removal as affected by toolwork interaction in diamond turning, Annals of the CIRP, 40/1:551-554.
62. Shimada S. et al., 1992, Molecular dynamics analysis as compared with experimental results of micromachining, Annals of the CIRP, 41/1:117-120.
63. Shimada S. et al., 1993, Feasibility study on ultimate accuracy in microcutting using molecular dynamics simulation, Annals of the CIRP, 42/1:91-94.
64. Shimada S. et al., 1994, Structure of micromachined surface simulated by molecular dynamics analysis, Annals of the CIRP, 43/1:51-54.
65. Adams D.P. et al., 2001, Micromilling of metal alloys with focused ion beam-fabricated tools, Precision Engineering 25:107-113.
66. Adams D.P., Vasile M.J., Krishnan A.S.M., 2000, Microgrooving and microthreading tools for fabricating curvilinear features, Precision Engineering 24:347-356.
67. Schaller Th. et al., 1999, Microstructure grooves with a width of less than 50 μm cut with ground hard metal micro end mills, Precision Engineering 23:229-235.
68. Egashira K., Mizutani K., 2002, Micro-drilling of monocrystalline silicon using a cutting tool, Precision Engineering 26:263-268.
69. Egashira K., Mizutani K., 2002, Ultrasonic vibration drilling of microholes in glass, Annals of the CIRP, 51/1:339-342.
70. Takeuchi Y., Sata T., 1996, Ultraprecision 3D micromachining of glass, Annals of the CIRP, 45/1:401-404.
71. Weule H., Hüntrup V., Tritschler H., 2001, Microcutting of steel to meet new requirements in miniaturization, Annals of the CIRP, 50/1:61-64.
72. Shamoto E., Moriwaki T., 1999, Ultraprecision diamond cutting of hardened steel by applying elliptical vibration cutting, Annals of the CIRP, 48/1:441-444.
73. Ikeno J. et al., 1990, Nanometer grinding using ultrafine abrasive pellets - manufacture of pellets applying electrophoretic deposition, Annals of the CIRP, 39/1:341-344.
74. Ohmori H. et al., 2001, Ultraprecision microgrinding of germanium immersion grating element for mild-infrared super dispersion spectrograph, Annals of the CIRP, 50/1:221-224.
75. Stephenson D. J. et al., 2001, Ultra-precision grinding of hard steels, Precision Engineering 25:336-345.
76. Ohmori H., Nakagawa T., 1990, Mirror surface grinding of silicon wafers with electrolytic in-process dressing, Annals of the CIRP, 39/1:329-332.
77. Gatzen H. H., Maetzig C., 1997, Nanogrinding, Precision Engineering 21:134-139.
78. Onikura H. et al., 2000, Fabrication of micro carbide tools by ultrasonic vibration grinding, Annals of the CIRP, 49/1:257-260.
79. Zhang B., Liu X. B., Brown C., 2002, Microgrinding of nanostructured material coatings, Annals of the CIRP, 51/1:251-254.
80. Egashira K., Masuzawa T., 1999, Micro-ultrasonic machining by the application of workpiece vibration, Annals of the CIRP, 48/1:131-134.
81. Meijer J. et al., 2002, Laser machining by short and ultrashort pulses, state of the art and new opportunities in the age of the photons, Annals of the CIRP, 51/2:531-550.
82. Tönshoff H.K. et al, 2000, New applications of femtosecond lasers in micromachining, Proceedings of the 1st Euspen topical conference on fabrication and metrology in nanotechnology, Copenhagen, Denmark, p. 10-17.
83. Bullema J.E. et al, 2002, Submicron laser micro machining of metals, Proc. of the 3rd Euspen International Conference, Eindhoven, Netherlands, p. 257-260.
84. Masuzawa T., Olde-Benneker J., Eindhoven J.J.C., 2000, A new method for three dimensional excimner laser micromachinin, hole area modulation (HAM), Annals of the CIRP, 49/1:139-142.
85. Ricciardi G. et al, 1998, Micromachining with excimer laser, Annals of the CIRP, 47/1:145-148.
86. Tönshoff H.K., Hesse D., Mommesen J., 1993, Micromachining using excimer lasers, Annals of the CIRP, 42/1:247-251.
87. Morrissey F. 2002, Micro and nano structuring using focused ion beam and dualbeam technologies, Proc. of the 3rd Euspen International Conference, Eindhoven, Netherlands, p. 475-478.
88. Miyamoto I., Taniguchi N., 1990, Focused ion beam fabrication of micro-mechanical parts - machining characteristics of polycrystalline silicon and computer simulation of profile changes patterns, Annals of the CIRP, 39/1:205-208.
89. Evans, C.J., Bryan, J.B., 1999, "Structured", "Textured" or "Engineered" Surfaces, Annals of the CIRP, 48/2:541-556.
90. Terada K. et al, 2002, Micro electro-discharge machining of single crystal diamond, Proc. of the 3rd Euspen International Conference, Eindhoven, Netherlands, p. 229-232.
91. Yu Z.Y., Masuzawa T., Fujino M., 1998, Micro-EDM for three-dimensional cavities - development of uniform wear method, Annals of the CIRP, 47/1:169-172.
92. Masuzawa T., Tsukamoto J., Fujino M., 1989, Drilling of deep microholes by EDM, Annals of the CIRP, 38/1:195-198.
93. Yu Z.Y., Rajurkar K.P., Shen H., 2002, High aspect ratio and complex shaped blind micro holes by micro EDM, Annals of the CIRP, 51/1:359-362.
94. Li Y. et al, 2002, Micro electro discarge machine with an inchworm type of micro feed mechanism, Precision Engineering 26:7-14.
95. Masuzawa T. et al, 2002, EDM-lathe for micromachining, Annals of the CIRP, 51/1:355-358.
96. Engel U., Eckstein R., 2002, Microforming - from basic research to its realization, Journal of Materials Processing Technology, 125-126:35-44.
97. Kals T.A., Eckstein R., 2000, Miniaturization in sheet metal working, Journal of Materials Processing Technology, 103:95-101.
98. Eckstein R., Engel U., 2000, Behaviour of the grain structure in micro sheet metal working, Proc. of the 8th international conference on metal forming, Krakow, Poland, p. 453-459.
99. Tiesler N., Engel U., 2000, Microforming - effects of miniaturization, Metal Forming 2000, Rotterdam: A.A. Balkema, p.355-360.
100. Tiesler N., Engel U., Geiger M., 1999, Forming of microparts - effects of miniaturization on friction, Proc. Of the 6th International Conference on Technology of Plasticity (ICTP), Nuremberg, Germany, Vol.II, p.889-894.
101. Tiesler N.A., 2002, Microforming, Wire 1:34-38.
102. Piotter V. et al, 2000, Micro injection moulding of components for microsystems, Proc. of the 1st Euspen topical conference on fabrication and metrology in nanotechnology, Copenhagen, Denmark, p. 182-189.
103. Michaeli W., Gärtner R., Opfermann D., 2002, New plastification concepts for micro injection moulding, Proc. of the 3rd Euspen International Conference, Eindhoven, Netherlands, p.321-324.
104. Kjær E.M. et al, 2000, Micro injection moulding, Proc. of the 1st Euspen topical conference on fabrication and metrology in nanotechnology, Copenhagen, Denmark, p. 259-267.
105. Piotter V. et al, 2002, Methods for large scale manufacturing of high performance micro parts, Proc. of the 3rd Euspen International Conference, Eindhoven, Netherlands, p.337-340.
106. Birkelund K. et al, 1997, New approaches to atomic force microscope lithography on silicon, J. Vac. Sci. Technol. B 15(6):2912-2915.
107. Rasmussen J.P. et al, 1997, Fabrication of an all-metal atomic force microscope probe, Transducers '97, Chicago, p.463-466.
108. Maekawa H., Komoriya K., 2001, Development of a micro transfer arm for a micro factory, Proc. of the IEEE international conference on robotics and automation, Seoul, Korea, p. 1444-1451.
109. Kussul E. et al, 2002, Development of micromachine tool prototypes for microfactories, Journal of micromechanics and microengineering, no 12 p. 795-812.
110. Okazaki Yuichi et al, 2000, Micro-lathe equipped with closed-loop numerical control, Proc. 2nd Int. workshop on microfactories, Switzerland, p.87-90.
111. Ooyama Naotake et al, 2000, Desktop machining microfactory, Proc. 2nd Int. workshop on microfactories, Switzerland, p. 14-17.
112. http://unit.aist.go.jp/imse/finemfg/English/finemfg-e-start.htm
113. Fukuda T., Arai F., 2000, Prototyping design and automation of micro/nano manipulation system, Proc. of the IEEE international conference on robotics and automation, San Francisco, p. 192-197.
114. Reinhart G., Höhn M., 1997, Growth into miniaturization - flexible microassembly automation, Annals of the CIRP, 46/1:7-10.
115. Fatikow S., Faizullin A., Seyfried J., 2000, Planning of a microassembly task in a flexible microrobot cell, Proc. of the IEEE international conference on robotics and automation, San Francisco, p. 1121-1126.
116. Torii A., Koyanagi T., Ueda A., 2000, Precision positioning micro robot using piezo elements and electromagnets, Proc. of the 1st Euspen topical conference on fabrication and metrology in nanotechnology, Copenhagen, Denmark, p.517-523.
117. Srinivasan U. et al, 2002, Fluidic self-assembly of micromirrors onto microactuators using capillary forces, IEEE journal on selected topics in quantum electronics, Vol. 8 No. 1:4-11.
118. Srinivasan U., Liepmann D., Hwe T., 2001, Microstructure to substrate self-assembly using capillary forces, IEEE Journal of microelectromechanical systems, Vol. 10 No.1:17-24.
119. Harsh K.F., Bright M., Lee Y.C., 2000, Study of micro-scale limits of solder self-assembly for MEMS, IEEE Electronic components and technology conference, p. 1690-1695.
120. Langen H.H., Masuzawa T., Fujino M., 1995, Modular method for microparts machining and assembly with self-alignment, Annals of the CIRP, 44/1:173-176.
121. Leach R.K., 2002, The importance of metrology and standardisation for micro-systems technology, National Physical Laboratory, UK.
122. Kramar J.A. et al, 2000, Molecular measuring machine design and measurements, Proc. of the 1st Euspen topical conference on fabrication and metrology in nanotechnology, Copenhagen, Denmark, p.34-44.
123. Hansen H.N. et al, 2002, Calibration and industrial application of instrument for surface mapping based on AFM, Annals of the CIRP, 51/1:471-474.
124. Leach R. et al, 2001, Advances in traceable nanometrology at the National Physical Laboratory, Nanotechnology 12:R1-R6.
125. Peggs, G.N., Lewis A.J., Oldfield S., 1999, Design for a compact high-accuracy CMM, Annals of the CIRP, 48/1:417-420.
126. Cao S. et al, 2002, Recent developments in dimensional metrology for microsystem components, Microsystem Technologies 8:3-6.
127. Brand U., Kleine-Besten T., Schwenke H., 2000, Development of a special CMM for dimensional metrology of microsystem components, ASPE 15th annual meeting, Scottsdale, Arizona, p.542-546.