Advancing cutting technology

CIRP Annals - Manufacturing Technology

Volumn 52, Issue 2, 2003, Pages 483-507

  Byrne, G ^a   Dornfeld, D ^b   Denkena, B ^c  

^a UNIVERSITY COLLEGE DUBLIN   (Ireland)

^b UNIVERSITY OF CALIFORNIA   (United States)

^c LEIBNIZ UNIVERSITY HANNOVER   (Germany)

Author keywords

Cutting; Material removal; Process development

Indexed keywords

COMPUTER CONTROL SYSTEMS; CUTTING TOOLS; HARDNESS; MACHINING; NUMERICAL CONTROL SYSTEMS; PROCESS ENGINEERING; TOUGHNESS;

ADVANCE CUTTING TECHNOLOGY; DRY CUTTING; MATERIAL REMOVAL PROCESSES;

CUTTING;

EID: 0345829165     PISSN: 00078506     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0007-8506(07)60200-5     Document Type: Article

References (158)

1. Fifty Years of CIRP: "Its Origins, Its Objectives, Its Achievements", 51st CIRP General Assembly, Nancy, France, August 2001
2. Les Annales du College International Pour L'Etude Scientifique des Techniques de Production Mechanique (CIRP), Volume 1, 1952, Lausanne, Suisse, Microtechnic Edition Scriptar S.A.
3. Taniguchi, N., 1983, Current Status in and Future Trends of Ultraprecision Machining and Ultrafine Materials Processing, Annals of the CIRP, 32/2:573 - 582
4. Corbett, J., McKeown, P.A., Peggs, G.N., Whatmore, R., 2000, Nanotechnology: International Developments and Emerging Products, Annals of the CIRP, 49/2: 523-545
5. Byrne, G.; Ahearne, E., 2002/3, First, Second and Third International CIRP Workshops on High Performance Cutting, Paris, January 2002, San Sabastian, August 2002 and Paris, January 2003 coordinated by CIRP Scientific Technical Committee "Cutting".
6. Tönshoff, H. K., Arendt, C., Ben Amor, R., 2000, Cutting of Hardened Steel, Annals of the CIRP, 49/2:547-566.
7. Weinert, K., 2002, Second International CIRP Workshop on High Performance Cutting, San Sebastian, August 2002 coordinated by the CIRP Scientific Technical Committee "Cutting".
8. Van Luttervelt, C.A., Childs, T.H.C., Jawahir, I.S., Klocke, F., Venuvinod, P.K., 1998, Present Situation and Future Trends in Modelling of Machining Operations - Progress Report of the CIRP Working Group "Modelling of Machining Operations", Annals of the CIRP, 47/2:587-626.
9. Mohlfeld, A., 2000, Trockenbohren mit PVD-beschichteten Hartmetallwerkzeugen. Dr.-lng. Dissertation, Universität Hannover
10. Friemuth, T., 2002, Herstellung spanender Werkzeuge, Habilitationsschrift, Universität Hannover
11. Dreyer, K., Westphal, H., Sottke, V., Tabersky, R., 1999, New Developments for Hardmetals, Cermets and Coatings in Experiment and Practice, VDI-Seminar "High Performance Processes in Cutting Operations", Oct. 26.-27., Dortmund
12. Ettmayer, P., Kolaska, H., Lengauer, W., Dreyer, K., 1995, Ti(C,N) cermets - Metallurgy and properties, International Journal of Refractory Metals and Hard Materials, 13/6:343-351
13. Porat, R., Ber, A., 1990, New approach of cutting too materials - Cermets, Annals of the CIRP, 39/1
14. Cassel, C., 1994, Einsatzverhalten von Cermet-Schneidstoffen bei der Drehbearbeitung, Dr.-lng. Dissertation, Universität Hannover
15. Gerschwiler, K., 1998, Untersuchungen zum Verschleißverhalten von Cermets beim Drehen und Fräsen, Dr.-lng. Dissertation, Universität Aachen
16. Tönshoff, H.K., Wobker, H.-G., Cassel, C., 1994, Wear Characteristics of Cermet Cutting Tools, Annals of the CIRP, 43/1:89-92
17. Whitney, E.D., 1994, Ceramic cutting tools - materials, development and performance, Noyes Publications, Park Ridge, New Jersey, U.S.A.
18. N.N., 2003, Praxis-Report No. 17: "SL 800 / SL 550 C: A new generation of uncoated and coated silicon nitride ceramics", CeramTec AG, Plochingen
19. Narula, C.K., 1995, Ceramic Precursor Technology and Its Applications, Marcel Dekker Inc., New York, Basel, Hong Kong
20. Tönshoff, H.K., Wobker, H.-G., Brunner, G., 1995, CBN grinding with small wheels, Annals of the CIRP, 44/1:311-316
21. Brücher, M., 2003, CVD-Diamant als Schneidstoff, Dr.-lng. Dissertation, Universität Berlin
22. Denkena, B., Tönshoff, H. K., Spengler, C., 2002, Schleifen von Hartmetall-Werkzeugen, Diamond Business, 2:62-65
23. Weinert, K., Thamke, D., 1998, Wirtschaftlichkeit der Trockenbearbeitung, Werkstattstechnik - wt, Band 88, 9/10:392-396
24. Tönshoff, H.K., Denkena, B., Friemuth, T., Spengler, Chr., 2002, Influence of different grinding processes on coating adhesion on cutting tools, 3rd International Conference "THE coatings", Nov. 28.-29., Thessaloniki, Greece
25. Van den Berg, H., Westphal, H., Tabersky, R., Sottke, V., König, U., 2002, Development and Applications of New Composite and Multilayer Composite Coatings, Euro PM02 Conference, Oct. 7-9, Lausanne
26. Bouzakis, K.-D., Michailidis, N., Skordaris, G., Kombogiannis, S., Hadjiyiannis, S., Efstathiou, K., Erkens, G., Rambadt, S., Wirth, I., 2002, Effect of the Cutting Edge Radius and its Manufacturing Procedure on the Milling Performance of PVD Coated Cemented Carbide Inserts, Annals of the CIRP, 51/1:61-64
27. Leyendecker, T., 1985, Neuartige Schneidwerkstoff-beschichtungen auf Titan- und Aluminiumbasis, Dr.-lng. Dissertation, RWTH Aachen
28. Grzesik, W., 2001, An Investigation of the Thermal Effects in Orthogonal Cutting Associated with Multilayer Coatings, Annals of the CIRP, 50/1:53-56
29. Denkena, B., Tönshoff, H.K., Friemuth, T., Gey, C., Podolsky, C., Frank, M., 2002, Safe Machining of Magnesium with CVD-DP and Smooth CVD-DP Coated Tools, Society of Manufacturing Engineers SME, Technical Paper FC02-264
30. Renevier, N.M., Oosterling, H., König, U., Dautzenberg, H., Kim, B.J., Geppert, L., Koopmans, F.G.M., Leopold, J., 2003, Performance and limitation of hybrid PECVD (hard coating) - PVD magneton sputtering (MoS2/Ti composite) coated inserts tested for dry high speed milling of steel and grey cast iron, Surface and Coatings Technology 163-164: 659-667
31. Fox-Rabinovich, G.S., Kovalev, A.I., Wainstein, D.L., Shuster, L.Sh., Dosbaeva, G.K., 2002, Improvement of duplex PVD coatings for HSS cutting tools by PFPE (perfluorpolyether Z-DOL), Surface and Coatings Technology, 160:99-107
32. Denkena, B., Friemuth, T., Fedorenko, S., Groppe, M., 2002, An der Schneide wird das Geld verdient. Werkzeugtechnik+Verfahren: 30/12:24-26
33. Lung, D., in: Weck. M., 1993, Konstruktion von Spindel-Lager-Systemen für die Hochgeschwindigkeits-Materialbearbeitung
34. Schulz, H., et al., 1981, 20 Jahre HSC, Sonderheft Werkstatt und Betrieb
35. Brandt, D., 1995, Randzonenbeeinflussung beim Hartdrehen, Dr.-lng. Dissertation, Universität Hannover
36. Koch, K.-F., 1996, Technologie des Hochpräzisions-Hartdrehen, Dr.-lng. Dissertation, Faklutät für Maschinenwesen der RWTH Aachen
37. Schmidt J., 1999, Mechanische und thermische Wirkung beim Drehen gehärteter Stähle, Dr.-lng. Dissertation, Universität Hannover
38. Wobker H.-G., 1997, Hartbearbeitung, Habilitationsschrift, Universität Hannover
39. Komanduri,R., Brown,R. H., 1981, On the Mechanics of Chip Segmentation in Machining, Journal of Engineering for Industry, Trans. ASME 103:33-51
40. Röttger K., 2003 Hartwalzen hartgedrehter Oberflächen, Dr.-lng. Dissertation, RWTH Aachen, Shaker Verlag, Aachen
41. König, W., 1965, Über den Einfluss nichtmetallischer Einschlüsse auf die Zerspanbarkeit von unlegierten Baustählen, Habilitation, Technische Hochschule Aachen
42. Jiang, L., Hänninen, H., 1994, Machinability of steel, A Review, Helsinki University of Technology, Laboratory of Engineering Materials
43. Zinkann, V., 1999, Der Spanbildungsvorgang als Acoustic-Emission-Quelle, Dr.-lng. Dissertation, RWTH Aachen, Shaker Verlag, Aachen
44. Dreßler, H. W., 1964 Einflußgrößen auf die Zerspanbarkeit von Automatenstahl, Dr.-lng. Dissertation, RWTH Aachen
45. Bernsmann, G., Bleymehl, M., Hassler, A., Ehl, R., 2001, The making of free cutting steels with additions of lead, bismuth, tellurium, selenium and tin, Stahl und Eisen, 121/2:87-91
46. Klocke, F., Klöper, C., 2002, Machinability characteristics of Austempered Ductile Iron (ADI). World Conference on ADI, Louisville, Kentucky, USA, Sep 26-27. Hrsg. American Foundry Society, Des Plaines, Illinois, USA, 2002, pp. 73-82
47. Klocke, F., 2002, Perspektiven der Zerspantechnik - Entwicklung und Integration der Fertigungsprozesse von morgen. Conference 29th - 30th October 2002, Aachen Germany
48. Reuter, U., 2002, Verschleißmechanismen bei der Bearbeitung von Gusseisen mit PCBN-Schneidstoffen, Dr.-lng. Dissertation Universität Darmstadt
49. Pape, L.-P., 1995, Untersuchungen zur Optimierung des Aluminiumkreislaufs, Dr.-lng. Dissertation, Technische Universität Berlin.
50. Eisenblaetter, G., 2000, Trockenbearbeitung mit Vollhartmetallwerkzeugen, WZL-RWTH Aachen. Berichte aus der Produktionstechnik, Band 5/2000, Shaker Verlag, Aachen.
51. Brinksmeier, E., Sölter, J., Walter, A., 2003 Machinability of Aluminium Alloys under High Speed Cutting Conditions, 4th International Conference on Metal Cutting and High Speed Machining, March, Darmstadt, Germany
52. Bolstad, J. A., 2000, Alloy development for intelligent magnesium designs, Proc. 1st Int. Magnesium Conference, 14th April, Bresica, Italy
53. Marpert, M., 2000, Sicherheitsaspekte bei der spanenden Bearbeitung von Magnesium, Magnesium Taschenbuch, Aluminium-Verlag Düsseldorf: 605-615.
54. Teti, R, 2002, Machining of Composite Materials, Annals of the CIRP 51/2:611-634.
55. Biermann, D., 1995, Untersuchungen zum Drehen von Aluminiummatrixwerkstoffen, Dr.-lng. Dissertation, Universität Dortmund
56. Weinert, K., Kempmann, C., Lange, M., 2002, Bearbeitung von Werkstoffverbunden und Verbundwerkstoffen, Tagungsband, Seminar, Perspektiven der Zerspantechnik - Entwicklung und Integration der Fertigungsprozesse von morgen, Aachen
57. Jörgensen, G., 2000, Methoden zur Haftfestigkeitsprüfung diamantbeschichteter Hartmetall-Wendeschneidplatten, Dr.-lng. Dissertation, Technische Universität Braunschweig
58. Klocke F., Grams, J., 2003, Unpublished project results, WZL, RWTH Aachen
59. Klocke, F., Gerschwiler, K., 2002, Drehen und Fräsen von Nickelbasislegierungen, Perspektiven der Zerspantechnik, Lehrstuhl für Technologie der Fertigungsverfahren, WZL der RWTH Aachen
60. Sharman, A.R.C., Aspinwall, D.K., Dewes, R.C., Bowen, P., 2001, Workpiece surface integrity considerations when finish turning gamma titanium aluminide, Wear, 249, 5/6:473-481
61. Aust, E., Niemann, H.-R., 1999, Machining of γ-TiAl. Advanced Engineering Materials, 1:53-57.
62. Uhlmann, E.; Schauerte, O. S.; Brücher, M.; Herter, S, 2001.: Tool wear during turning of titanium aluminide intermetallics. Production Engineering, 8/2:13-16
63. Beier H., 2002, Burr Reduction Investment - Production Costs - Prediction of Burrs, Presentation at HBC Workshop, CIRP, Paris
64. Kim, J., Dornfeld, D., 2001, Cost Estimation of Drilling Operation by a Drilling Burr Control Chart and Bayesian Statistics, SME J. Manufacturing Systems, 20/2: 89-97
65. Hockauf, W., 2002, Burr Reduction Investment - Production Costs - Burr Reduction - Prediction of Burrs, Presented at HPC Workshop, 23 Jan., CIRP Paris
66. Gillespie, L., 1975, Burrs Produced by Drilling, Bendix Corporation, Unclassified Topical Report, BDX-613-1248
67. Min, S., Dornfeld, D., Kim, J., Shyu, B., 2001, Finite element modelling of burr formation in metal cutting, Proc. 4th CIRP Int'l Workshop on Modelling of Machining Operations, Aug., Delft: 97-104.
68. Klocke, F., Eisenblaetter, G., 1997, Dry Cutting, Annals of the CIRP-Manufacturing Technology, 46/2:519-526
69. Klocke, F., Gerschwiler, K., 2003 VDI Arbeitskreis Produktionstechnik (ADB) Stuttgart, Seminar: Trockenbearbeitung von Metallen, Minimalmengenschmierung - Ökonomische Aspekte der Trockenbearbeitung, WIV Weiterbildungszentrum Stuttgart
70. Hands, D.M., Sheehan, J., Wong, B., Lick, H. B., 1996, Comparison of Metalworking Fluid Mist Exposures from Machining with Different Levels of Machine Enclosure, American Industrial Hygiene Association Journal, 57/12:173-1178
71. Gunter, K.L., Sutherland, J.W., 1999, An Experimental Investigation into The Effect of Process Conditions on the Mass Concentration of Cutting Fluid Mist in Turning, Journal of Cleaner Production, 7/5:341-350
72. Braga, D.U., Diniz, A.E., Miranda, G.W.A., Coppini, N.L., 2002, Using a Minimum Quantity of Lubricant (MQL) and a Diamond Coated Tool in The Drilling of Aluminium-silicon Alloys, Journal of Materials Pro-cessing Technology, 122/1:127-138.
73. Rahman, M., Kumar, A.S., Salam, M.U., 2002, Experimental Evaluation on the Effect of Minimal Quantities of Lubricant in Milling, International Journal of Machine Tools and Manufacture, 42/5:539-547.
74. Brinksmeier, E., Walter, A.; Janssen, R., Diersen, P., 1999, Aspects of Cooling Lubrication Reduction in Machining Advanced Materials, Proceedings of the Institution of Mechanical Engineers, 2/3 Part B:769-778
75. Um, J.Y., Chow, L.C., Jawahir, I.S., 1995, Experimental Investigation of the Application of the Spray Cooling Method in Stainless Steel Machining, American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, Manufacturing Science and Engineering, 2/1:165-178
76. Machado, A.R., Wallbank, J., 1997, The Effect of Extremely Low Lubricant Volumes in Machining, Wear, 210:76-82.
77. Wakabaysaki, T., Sato, H., Inasaki, I., 1998, Turning Using Extremely Small Amount of Cutting Fluids, JSME, International Journal, Series C, 41/1:143-148
78. Weck, M., et al., 2002, Werkzeugmaschinen für die Produktion von morgen im Spannungsfeld, Proceedings of the Aachener Werkzeugmaschinen Kolloquium 2002, pp. 373-409
79. Die Deutsche Werkzeugmaschinenindustrie im Jahr 2001. VDW, Frankfurt/Main, Januar 2002.
80. Eberlein, W., Schleider, U., 2001, Linearantriebe senken Kosten, WB Werkstatt und Betrieb, 134/1\2:68-71.
81. NN, 2002, Bearbeitungszentren mit Linearmotoren. Marktübersicht. Fertigung, Landsberg, 30/8:20-21.
82. Firmenbroschüre Motion Control. Siemens, Erlangen-Nürnberg, Mai 2002, Nr.2.
83. Abele, E., Bork, B., 2001, Vorteile beim Einsatz von Linearmotormaschinen im Werkzeug- und Formenbau, Konferenz-Einzelbericht: 3D-Erfahrungsform Werkzeug- und Formbau, Begleitband, 1-2 März, Darmstadt, pp.315-332.
84. Pritschow, G., 1998, A Comparison of Linear and Conventional Electromechanical Drives, Annals of the CIRP 47/2.
85. Weule, H., Dambacher, U., Mussa, S., 2001, Neue Gewindegeometrie für den Kugelgewindetrieb. Einfluss hoher Lastwinkel auf die Belastung von Kugelgewindetrieben, Werkstattstechnik, Vol. 91/8, pp. 519-522.
86. Tönshoff, H. K., et al., 1999, Fräsen ohne Tempolimit, wt Werkstattstechnik 69, 7/8:365-368.
87. Heller, Berndt, 2003, Zerspanung - Potenziale noch lange nicht ausgereizt. 4th International Conference on Metal Cutting and High Speed Machining
88. Heisel, U., Ziegler, F., 2000, Sheet metal lightweight design for direct driven machine tools, Production Engineering. Research and Development, 7/1:73-76.
89. Suh, J-D, Lee, D-G, 2002, Composite machine tool structure for high speed milling machines, Annals of the CIRP 51/1:285-288.
90. Tönshoff, H.K., Lapp, C., Grendel, H., 2001, Produktivitätssteigerung von Werkzeugmaschinen, Zeitschrift für wirtschaftlichen Fabrikbetrieb, 96/9:481-486.
91. Weck, M., Börner, U., 2001, Hochdynamische Drehmaschine zur Unrundbearbeitung, Unrunde Bauteile schnell und flexibel fertigen, Zeitschrift für wirtschaftlichen Fabrikbetrieb, 98/9:451-452.
92. Lapp, C., 2002, Indirekte Erfassung und Regelung von Bearbeitungskräften an direkt getriebenen Vorschubeinheiten, Dissertation, Universität Hannover.
93. Ruskowski, M., Reicke, L., Popp, K., 2002, Enhanced Steady State Stiffness for a Magnetic Guide Using Smart Disturbance Compensation, Proceedings of the 6th International Conference on Motion and Vibration Control MOVIC'02, Saitama.
94. Pritschow, G.; Schweiker, A.; Selle, J.; Ströhle, H.; Tönshoff, H. K., 2000, Preventive Error Compensation Circuit for Multi-Axis Machining. Production Engineering [WGP-Annals], 7/2:31-34.
95. Grundler, E., 2002, Weg vom einfachen Drehteil - hin zur Komplettbearbeitung, VDI-Z Integrierte Produktion, 144/11-12:29-31.
96. Choudhury, S.-K., Mangrulkar, K.-S., 2000, Investigation of orthogonal turn-milling for the machining of rotationally symmetrical work pieces. Journal of Materials Processing Technology, 99/1-3:120-128.
97. Pogacnik, M., Kopac, J., 2000, Dynamic stabilization of the turn-milling process by parameter optimization, Proc. Of the Institution of Mechanical Engineers, Part B, 214/2:127-135.
98. Denkena, B., 2001, Komplettbearbeitung von 6 Seiten, WB Werkstatt und Betrieb, 134/9:50,52,54,57.
99. Siegwart, R., 2000, Komplettbearbeitung im Werkzeugbau, Werkstatt und Betrieb, pp. 42-46
100. Feinauer, A., Friedrich, W., Haferkorn, W., Hennes, N., Hork, M., Krell, M., Lilla, A., Paepenmüller, F., Stave, H., Walker, B., Weck, M., Winkler, H-H., 2002, Werkzeugmaschinen für die Produktion von morgen im Spannungsfeld: flexibel und einfach, schnell und genau, AWK Aachener Werkzeugmachinen-Kolloqium, pp. 373-409
101. Weinert, K., Finke, M., Johlen, G., 2001, Flexible Hartbearbeitung von Futterteilen durch Hartdrehen und Schleifen, ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 96/9:463-467.
102. Denkena, B. 2001, Pfeilschnelle Vertikaldrehmaschine für die Zulieferindustrie. Maschine + Werkzeug 7/8:110-114
103. Beyer, R., 2001, Vertikale Pick-up-Drehmaschine: Maschinenkonzepte des Jahrzehnts. Mav, 3:46.
104. Hartdrehen und Schleifen: Konzepte im Vergleich. Produktion (2002), 7:12.
105. Marktübersicht: Vertikale Pick-up-Drehmaschinen. Mav (2002), Nr. 3, S. 46.
106. Aspinwall, D.K., Dewes, R.C., Burrows, J.M., Paul, M.A., 2001, Hybrid High Speed Machining(HSM): System Design and Experimental Results for Grinding/HSM and EDM/HSM, Annals of the CIRP, 50/1:145-148
107. Müller, M.G., 2000, Laserintegrierte Komplettbearbeitung - Laserintegration und lasergestützte Verfahren. Laser Magazin 4, pp. 20-21
108. Weck, M., Hermanns, C., 1993, Laserintegration in Werkzeugmachinen, VDI-Z, 135/5:38-41
109. Mussa, S.; Kirchhoff, M., 2002, Teilprojekt Drehmaschine, ACCOMAT - Die Genauigkeitsgeregelte Maschine, 2:189-213.
110. Altintas, Y.; Woronko, A., 2002, A piezo tool actuator for precision turning of hardened shafts, Annals of the CIRP, 51/1:303-306.
111. Weck, M.; Hilbing, R., 1998, Active compensation of dynamic vibrations in precision machining, Production Engineering, 5/1:51-54.
112. Weck, M., Staimer, D. 2002, Parallelkinematic Machine Tools- Current State and Future Potentials, Annals of the CIRP, 51/2:671-683.
113. Walker, T., Haberkern, A., 2001, Anwendererfahrungen für Drehteile mit PKM V100, 1. Internationale Fachtagung über Parallelkinematische Werkzeugmaschinen, 21.-22.6.2001, Messe Stuttgart
114. http://www.ifw.uni-hannover.de/robotool/.
115. Merlet, J.-P., 2000, Parallel Robots. Kluwer Academic Publishers, Dordrecht, Netherlands.
116. Pritschow, G., Wurst, K.-H., 1997, Systematic Design of Hexapods and other Parallel Link Systems, Annals of the CIRP, 46/1:291-295.
117. Tönshoff, H.K.; Grendel, H.; Grotjahn, M., 2002, Modelling and Control of a Linear Direct Driven Hexapod, 3rd Chemnitz Parallel Kinematics Seminar, April 23-25, Verlag Wissenschaftliche Scripten, Zwickau, pp. 335-350.
118. Spur, G., Uhlmann, E., Ising, M., 1999, Computer.
119. Bernard, A., Hasan, R., 2002, Working situation model for safety integration during design phase, Annals of the CIRP, 51/1:119.
120. Krishnan, N., Sheng, P.S., 2000, Environmental versus conventional planning for machined components, Annals of the CIRP, 49/1:363.
121. Tönshoff, H.K., Karpuschewski, B., Glatzel, T., 1997, Particle emission and immission in dry grinding, Annals of the CIRP, 46/2:693.
122. Sutherland, J.W., Kulur, V.N., King, N.C., 2000, An Experimental Investigation of Air Quality in Wet and Dry Turning, Annals of the CIRP, 49/1:61.
123. Spur, G., Bold, J., 1997, Anforderungen an trennende Schutzeinrichtungen für die HSC.
124. Schulz, H., Würz, T., Huerkamp, W., Leopold, J., 1997, Safety concepts for tools for high.
125. Jawahir, I., 2002, Prediction of chip forms and breakability in turning operations, Presentation at HPC Workshop, CIRP, August 22, San Sebastian
126. Armarego, E., Arsecularatne, J., Matthew, P., Verezub, S., 2001, A CIRP survey on the available predictive performance models of machining operations - report on preliminary findings, Proc. 4th CIRP International Workshop on Modelling of Machining Operations, August 2001, Delft: 71-83
127. Ernst, H., Merchant, M., 1941, Chip formation, friction and high quality machined surfaces, Surface Treatment of Metals, 29:299
128. Palmer, W., Oxley, P., 1959, Mechanics of metal cutting, Proc. Institute of Mechanical Engineers, 173:623.
129. Smith, S., Tlusty, J., 1988, Modelling and simulation of the milling process, ASME, Proceedings of the Winter Annual Meeting, PED-33:17-26
130. Recht, R., 1964, Catastrophic thermoplastic shear, Trans. ASME, 86: 189-193
131. Poulachon, G., Moisan, A., Jawahir, I., 2001, On modelling the influence of thermo-mechanical behaviour in chip formation during hard turning of 100Cr6 bearing steel, Annals of the CIRP, 50/1:31-36
132. Guo, Y.B., Liu, C.R., 2002, 3D FEA Modeling of Hard Turning, ASME J. Manufac. Sci. Eng., 124:189-199.
133. Ko, S., Dornfeld, D.A., 1991, A Study on Burr Formation Mechanism, Trans. ASME, J. Eng. Mats. Tech., 113/1:75-87.
134. Choi, J., 2003, Modelling of inter-layer gap formation in drilling of a multi-layer material, CODEF Annual Meeting, February 28th, University of California, Berkeley
135. Leopold, J., 2002, Burr formation influenced by tool coatings, Presentation at HPC Workshop, CIRP, January 23rd, Paris
136. Jawahir, I., 2002, Chip form mechanisms: experimental observations and predictive models for turning, Presentation at HPC Workshop, CIRP, January 23rd, Paris
137. Marusich, T., Brand, C., Thiele, J., 2002, A methodology for simulation of chip breakage in turning processes using an orthogonal finite element method, Proc. 5th CIRP International Workshop on Modelling of Machining Operations, May 20-21, West Lafayette, IN: 139-148.
138. Klocke, F.; Raedt, H.W.; Hoppe, S., 2002, 2D-FEM Simulation of the orthogonal High Speed Cutting Process. Machining Science and Technology, 5/3:323-340
139. Yen, E.; Söhner, J.; Altan, T.; Weule, H., 2002, Estimation of tool wear in metal cutting with the finite element methode. Proceedings of the 5th CIRP International Workshop on Modeling of Machining Operations, Purdue/USA, 20.-21.05.2002, pp. 149-160
140. Klocke, F.; Hoppe, S., 2001, FEM Modelling of the HSC Process and it's Experimental Verification., Proceedings of the 3rd International Conference on Metal Cutting and High Speed Machining, Metz 27.-29.06.2001, pp. 65-72
141. Rentsch, R., Inasaki, I., Brinskmeier, E., Preuß, W., Riemer, O., 1996, Influence of material characteristics on the micromachining process, Materials Issues in Machining III and the Physics of Machining Processes III, ed. D. Stephenson and R. Stevenson, TMMS: 65-86
142. Lucca, D., Chou, P., Hocken, R., 1998, Effect of tool edge geometry on the nanometric cutting of Ge, Annals of the CIRP, 47/1:475-478
143. Tönshoff, H., Inasaki, I., 2001, Sensors in Manufacturing, Wiley-VCH: 4-5
144. Byrne, G., Dornfeld, D., Inasaki, I., König, W., Teti, R., 1995, Tool Condition Monitoring (TCM) - The Status of Research and Industrial Application, Annals of the CIRP, 44/2:541-567
145. Heisel, U., Feinauer, A., 1999, Dynamic influence on workpiece quality in high speed milling, Annals of the CIRP, 48/1:321-324
146. Tönshoff, H., Wobker, H., Hartmann, P., Kilsmark, P., 1995, The future of monitoring, Überwachung von Zerspan- und Umformprozessen, Proc. of CIRP/VDI Conference, March 1995, Düsseldorf: 347-360
147. Klocke, F., Reuber, M., 2000, Process monitoring in sculptured surface milling, Production Engineering, Research and Development, 7/1:1-4
148. Reuber, M., 2000, Prozessüberwachung beim Schlichtfräsen von Freiformflächen, Dr.-Ing. Dissertation, RWTH Aachen, Shaker Verlag, Aachen
149. Klocke, F., Kratz, H.H., 2001, Process monitoring in mould and die milling with accelerometer signals, Production Engineering, Research and Development, 8/2:45-48
150. Rehse, M., 1999, Flexible Prozessüberwachung bei der Bohr- und Fräsbearbeitung in einer autonomen Produktionszelle, Berichte aus der Produktionstechnik, Dr.-Ing. Dissertation, RWTH Aachen, Shaker Verlag, Aachen
151. Uhlmann, E., Fries, E., 1999, Intelligent process monitoring, Production Engineering, Research and Development, 6/2:25-28
152. Scheffer, C., Kratz, H., Heyns, P.S., Klocke, F., 2003, Development of a Tool Wear Monitoring System for Hard Turning, Int. J. Machine Tools & Manufacture, (accepted for publishing)
153. Pritschow, G., Bretschneider, J., Fritz, S., 1999, Reconstruction of process forces within digital servodrive systems, Production Engineering, Research and Development, 6/1:73-78
154. Weinert, K., Mehnen, J., Kalveram, M., Schwefel, H.-P., Naujoks, B., 1999, On the analysis of the dynamics of high-speed milling by means of time series analysis methods, Production Engineering, Research and Development, 6/2:21-24
155. Kasashima, N. et al., 1994, Diagnosing cutting tool conditions in milling using wavelet transform, JSPE Publ. Series, 1:339-344
156. Karpuschewski, B., 2001, Sensoren zur Prozeßüberwachung beim Spanen, Fortschritt-Berichte VDI
157. Sakura, M., Inasaki, I., 1993, Intelligent data base for grinding operations, Annals of the CIRP, 42/1:379-382
158. Moriwaki, T., 2001, Sensors in Mechanical Manufacturing - Requirements, Demands, Boundary Conditions, Signal Processing, Communications Techniques and Man-Machine Interfaces, Sensors in Manufacturing, eds. Tönshoff, H.K., Inasaki, I., Wiley-VCH: 24-45