The drilling vibration behavior of a twisted microdrill

Journal of Manufacturing Science and Engineering

Volumn 126, Issue 4, 2004, Pages 719-726

  Huang, Bo Wun ^a  

^a CHENG SHIU UNIVERSITY   (Taiwan)

Author keywords

Microdrilling; Moving Boundary; Vibration

Indexed keywords

COMPUTER SIMULATION; ELASTICITY; FORCE MEASUREMENT; FRACTURE; NATURAL FREQUENCIES; PRINTED CIRCUIT BOARDS; PRODUCTION ENGINEERING; VIBRATIONS (MECHANICAL);

MICRODRILLING; MICRODRILLS; MOVING BOUNDARY; VIBRATION BEHAVIOR;

DRILLING;

EID: 14744292292     PISSN: 10871357     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1813472     Document Type: Article

References (26)

1. Shaw, M., 1989, Metal Cutting Principles, Clarendon Press, Oxford.
2. Rosard, D. D., 1953, "Natural Frequency of Twisted Cantilever Beams," ASME J. Appl. Mech., 20, pp. 241-248.
3. Jarrett, G. W., and Warner, P. C., 1953, "The Vibration of Rotating Tapered Twisted Beam," ASME J. Appl. Mech., 20, pp. 381-389.
4. Tekinalp, O., and Ulsoy, A. G., 1989, "Modeling and Finite Element Analysis of Drill Bit Vibration," ASME J. Vib., Acoust., Stress, Reliab. Des., 111, pp. 148-155.
5. Tekinalp, O., and Ulsoy, A. G., 1990, "Effect of Geometric and Process Parameters in Drill Transverse Vibration," ASME J. Eng. Ind., 112, pp. 189-194.
6. Liao, C. L., and Dang, Y. H., 1992, "Structural Characteristics of Spinning Pretwisted Orthotropic Beams," Comput. Struct., 45(4), pp. 715-731.
7. Liao, C. L., and Huang, B. W., 1995, "Parametric Instability of a Pretwisted Beam Under Periodic Axial Force," Int. J. Mech. Sci., 37(4), pp. 423-439.
8. Magrab, E., and Gilsinn, D. E., 1984, "Bucking Loads and Natural Frequency of Twist Drills," Trans. ASME, 106, pp. 196-204.
9. Ulsoy, A. G., 1989, "A Lumped Parameter Model for the Transverse Vibration of Drill Bit," Control Manuf. Process. Robotic Sys., pp. 15-25.
10. Fuji, H., Marui, E., and Ema, S., 1988, "Whirling Vibration in Drilling Part 3: Vibration Analysis in Drilling Workpiece With a Pilot Hole," ASME J. Eng. Ind., 110, pp. 315-321.
11. Nishimae, I., Satoh, Y., Kojima, T., and Fukushima, T., 2000, "Laser Processing System for Micro Drilling of Printed Circuit Boards," Proc. SPIE, 4088, pp. 209-211.
12. Okada, T., 2000, "Laser via-Hole Drilling of Printed Wiring Board," Proc. SPIE, 4088, pp. 148-153.
13. Hinds, B. K., and Tyreanor, G. M., 2000, "Analysis of Stress in Micro-Drills Using the Finite Element Method," Int. I. Mach. Tool Manufact., 40, pp. 1443-1456.
14. Yang, Z., Li, W., Chen, Y., and Wang, L., 1998, "Study for Increasing MicroDrill Reliability by Vibrating Drilling," Reliability Eng. Sys. Safety, 61, pp. 229-233.
15. Chyan, H. C., and Ehmann, K. F., 1998, "Development of Curved Helical Micro-Drill Point Technology for Micro-Hole Drilling," Mechatronics, 8, pp. 337-358.
16. Yang, Z., Tan, Q., and Wang, L., 2002, "Principle of Precision Micro-Drilling With Axial Vibration of Low Frequency," Int. I. Prod. Res., 40(6), pp. 1421-1427.
17. Rincon, D. M., and Ulsoy, A. G., 1995, "Complex Geometry, Rotary Inertia and Gyroscopic Moment Effects on Drill Vibrations," J. Sound Vib., 188(5), pp. 701-715.
18. Iwastsubo, T., Sugiyama, Y., and Ishihara, K., 1972, "Stability and Stationary Vibrations of Columns Under Periodic Loads," J. Sound Vib., 23, pp. 245-257.
19. Lee, H. P., 1994, "Buckling and Dynamic Stability of Spinning Pre-Twisted Beams Under Compressive Axial Loads," Int. J. Mech. Sci., 36(11), pp. 1011-1026.
20. Lee, H. P., 1996, "Dynamic Response of a Beam With a Moving Mass," J. Sound Vib., 192(2), pp. 289-294.
21. Ram, Y. M., and Caldwell, J., 1996, "Free Vibration of a String With Moving Boundary Conditions by the Method of Distorted Images," J. Sound Vib., 194(1), pp. 35-47.
22. Fung, R. F., Huang, J. S., and Chu, J. J., 1998, "Dynamic Stability of an Axially Travelling String/Slider Coupling System With Moving Boundary," J. Sound Vib., 211(4), pp. 689-701.
23. Law, S. S., and Zhu, X. Q., 2000, "Study on Different Beam Models in Moving Force Identification," J. Sound Vib., 234(4), pp. 661-679.
24. Wu, J. S., and Chen, D. W., 2000, "Dynamic Analysis of a Uniform Cantilever Beam Carrying a Number of Elastically Mounted Point Masses With Dampers," J. Sound Vib., 229(3), pp. 549-578.
25. Lee, H. P., 1996, "Dynamic Stability of a Tapered Cantilever Beam on an Elastic Foundation Subjected to a Follower Force," Int. J. Solids Struct., 33(10), pp. 1409-1424.
26. Daikoh, Y., Terabayahshi, T., and Masuda, M., 1994, "Micro Drilling of Printed Circuit Boards Cutting Force and Chip Flow Mechanism," I. Jpn. Soc. Precis. Eng., 60(12), pp. 1796-1800 (in Japanese).