An evaluation of ploughing models for orthogonal machining

Journal of Manufacturing Science and Engineering, Transactions of the ASME

Volumn 121, Issue 4, 1999, Pages 550-558

  Waldorf, D J ^a   DeVor, R E ^a   Kapoor, S G ^a  

^a University of Illinois at Urbana Champaign   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0001034208     PISSN: 10871357     EISSN: 15288935     Source Type: Journal    
DOI: 10.1115/1.2833050     Document Type: Article

References (37)

1. Masuko, M., “Fundamental Research on Metal Cutting (1st Report), A New Analysis of Cutting Forces,” Trans. JSME, v. 19, 1953, pp. 32-39.
2. Albrecht, P., “New Developments in the Theory of the Metal-Cutting Process, Part 1. The Ploughing Process in Metal Cutting,” ASME JOURNAL OF ENGINEERING FOR INDUSTRY, November, 1960, pp. 348-357.
3. Palmer, W. B., and Yeo, R. C. K., “Metal Flow Near the Tool Point during Orthogonal Cutting with a Blunt Tool,” Proc. 4th Int. MTDR Conf, 1963, pp. 61-71.
4. Moneim, Abdel M. E., “Tool Edge Roundness in Finish Machining at High Cutting Speeds,” Wear, Vol. 58, 1980, pp. 173-192.
5. Iwata, K., Osakada, K., and Terasaka, Y., “Process Modeling of Orthogonal Cutting by the Rigid-Plastic Finite Element Method,” ASME Journal of Engineering Materials and Technology, Vol. 106, April, 1984, pp. 132-138.
6. Parthimos, Dimitris, and Ehmann, Komel F., “A Model for the Stress Field Around the Shear Zone,” Trans, of NAMRI/SME, Vol. 21, 1993, pp. 197-204.
7. Elanayar, V. T., Sunil and Yung C., Shin, “Modeling of Tool Forces for Worn Tools: Flank Wear Effects,” Materials Issues in Maching-II and The Physics of Machining Processes-II, Proceedings of the Winter Annual Meeting of ASME and the Fall Meeting of the Minerals, Metals, and Materials Society, 1994, pp. 341-361.
8. Rubenstein, C., “The Edge Force Components in Oblique Cutting,” Int. J. Mach. Tools Manufact., Vol. 30, No. 1, 1990, pp. 141-149.
9. Sarwar, M., and Thompson, P. J., “Cutting Action of Blunt Tools,” Proc. 22nd Int. MTDR Conf, 1981, pp. 295-304.
10. Wu, D. William, “A New Approach of Formulating the Transfer Function for Dynamic Cutting Processes,” ASME JOURNAL OF ENGINEERING FOR INDUSTRY, Vol. III, February 1989, pp. 37-47.
11. Endres, W. J., DeVor, R. E., and Kapoor, S. G., “A Dual-Mechanism Approach to the Prediction of Machining Forces, Parts 1 and 2,” ASME JOURNAL OF ENGINEERING FOR INDUSTRY, Vol. 117, November 1995, pp. 526-541.
12. Elbestawi, M. A., Ismail, F., Du, R., and Ullagaddi, B. C., “Modelling Machining Dynamics Including Damping in the Tool-Workpiece Interface,” Tribo-logical Aspects in Manufacturing, ASME WAM, PED-Vol. 54/Trib-Vol. 2, 1991, pp. 253-264.
13. Montgomery, D., and Altintas, Y., “Mechanism of Cutting Force and Surface Generation in Dynamic Milling,” ASME WAM, PED-Vol. 40, 1989, pp. 65-74.
14. Sisson, T. R., and Kegg, R. L., “An Explanation of Low-Speed Chatter Effects,” ASME JOURNAL OF ENGINEERING FOR INDUSTRY, November, 1969, pp. 951-958.
15. Haslam, D„ and Rubenstein, C., “Surface and Sub-surface Work-hardening Produced by the Planing Operation,” Annals of the CIRP, Vol. 18,1970, pp. 369-381.
16. Thomsen, E. G., Lapsley, J. T., Jr., and Grassi, R. C., “Deformation Work Absorbed by the Workpiece During Metal Cutting,” Trans. ASME, May 1953, pp. 591-598.
17. Usui, E., Shirakashi, T., and Kitagawa, T., “Analytical Prediction of Cutting Tool Wear,” Wear, Vol. 100, 1984, pp. 129-151.
18. Danai, K., Nair, R., and Malkin, S., “An Improved Model for Force Transients in Turning,” ASME JOURNAL OF ENGINEERING FOR INDUSTRY, Vol. 114, Nov., 1992, pp. 400-403.
19. Moneim, Abdel M. E. and Scrutton, R. F., “The Tribology of Cutting Tools during Finish Machining. I and II,” Wear, Vol. 25, 1973, pp. 45-63.
20. Roth, R. N., and Oxley, P. L. B., “Slip-line Field Analysis for Orthogonal Machining Based Upon Experimental Flow Fields,” J. Mechanical Engr. Science, Vol. 14, No. 2, 1972, pp. 85-97.
21. Rubenstein, C., Lau, W. S., and Venuvinod, P. K., “Flow of Workpiece Material in the Vicinity of the Cutting Edge,” Int. J. MTDR, Vol. 25, No. 1, 1985, pp. 91-97.
22. Rubenstein, C., Groszman, F. K., and Koenigsberger, F., “Force Measure-ments during Cutting Tests with Single Point Tools Simulating the Action of a Single Abrasive Grit,” Proc. Int. Industrial Diamond Conf, Vol. 1, 1966, p. 161.
23. Komanduri, R., “Some Aspects of Machining with Negative Rake Tools Simulating Grinding,” Int. J. MTDR, Vol. 11, 1971, pp. 223-233.
24. Heginbotham, W. B., and Gogia, S. L., “Metal Cutting and the Built-up Nose,” Proc. Inst. Mech. Engrs., Vol. 175, No. 18, 1961, pp. 892-905.
25. Moneim, Abdel M. E. and Scrutton, R. F., “Post-Machining Plastic Recovery and the Law of Abrasive Wear,” Wear, Vol. 24, 1973, pp. 1-13.
26. Abebe, Minasse, and Appl, F. C., “A Slip-line Solution for Two-dimensional Steady State Machining with a Stagnant Region at the Tip of the Tool,” Proc. 11th NAMRC, 1983, pp. 291-298.
27. Kita, Y., Ido, M., and Kawasaki, N., “A Study of Metal Flow Ahead of Tool Face with Large Negative Rake Angle,” ASME JOURNAL OF ENGINEERING FOR INDUSTRY, Vol. 104, August, 1982, pp. 319-325.
28. Merchant, M. E., “Basic Mechanics of the Metal-Cutting Process,” ASME Journal of Applied Mechanics, Vol. 66, 1944, pp. A168-A175.
29. Oxley, P. L. B., Mechanics of Machining: An Analytical Approach to Assessing Machinability, Ellis Horwood, Chichester, 1989.
30. Johnson, K. L., Contact Mechanics, Cambridge University Press, New York, 1985.
31. Smith, J. O., “Stresses Due to Tangential and Normal Loads on an Elastic Solid with Application to Some Contact Stress Problems,” ASME Journal of Applied Mechanics, June, 1953, pp. 157-166.
32. Dumas, G., and Baronet, C. N., “Elastoplastic Indentation of a Half-space by an Infinitely Long Rigid Cylinder,” Int. J. Mech. Sci., Vol. 13, 1971, pp. 519-530.
33. Hill, R., The Mathematical Theory of Plasticity, Clarendon Press, Oxford, 1950.
34. Shaw, M. C., and DeSalvo, G. J., “A New Approach to Plasticity and Its Application to Blunt Two Dimensional Indenters,” ASME JOURNAL OF ENGINEERING FOR INDUSTRY, May, 1970, pp. 469-479.
35. Black, J. T., “Flow Stress Model in Metal Cutting,” ASME JOURNAL OF ENGINEERING FOR INDUSTRY, Vol. 101, November, 1979, pp. 403-415.
36. Shaw, M. C., and Finnie, Iain, “The Shear Stress in Metal Cutting,” Transactions of the ASME Vol. 77, 1955, p. 115.
37. Bayoumi, Abdel E., Xie, Qufei, and Hamdan, M. Nader, “Effect of Cutting Conditions on Dynamic Properties and Surface Integrity of Work Material,” Wear, Vol. 146, 1991, pp. 310-312.