Micromixers

Micromixers

Volumn , Issue , 2012, Pages

  Nguyen, Nam Trung ^a  

^a NANYANG TECHNOLOGICAL UNIVERSITY   (Singapore)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85013875973     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/C2011-0-69734-0     Document Type: Book

References (398)

1. Paul E.L., Atiemo-Oberg V.A., Kresta S.M. Handbook of Industrial Mixing 2004, Wiley, New York.
2. Nguyen N.T., Wu Z.G. "Micromixers - a review". Journal of Micromechanics and Microengineering 2005, vol. 15:R1-R16.
3. Bourne J.R. "Mixing and Selectivity of Chemical Reactions". Organic Process Research & Development 2003, vol. 7:471-508.
4. K.F. Jensen, The Impact of MEMS on the chemical and pharmaceutical industries, in: Technical Digest of the IEEE Solid State Sensor and Actuator Workshop, Hilton Head Island, SC, 4-8 June, 2000, pp. 105-110.
5. Löwe H., Hessel V., Muller A. "Microreactors. Prospects already achieved and possible misuse". Pure Applied Chemistry 2002, vol. 74. 2271-2276.
6. Hirschfelder J.C., Gurtiss J.C., Bird R.M. Molecular Theory of Gases and Liquids 1954, Wiley, New York.
7. Bird R.B., Stewart W.E., Lightfoot E.N. Transport Phenomena 2001, Wiley, New York. second ed.
8. Garcia A.L. Numerical Methods for Physics 2000, Prentice Hall, Englewood Cliffs. second ed.
9. Wu Z., Nguyen N.T. Convective-diffusive transport in parallel lamination micromixers. Microfluidics and Nanofluidics 2004, 1:208-217.
10. Bown W. Brownian motion sparks renewed debate. New Scientist 1992, 133:25.
11. R. Brown, A brief account of microscopical observations made in the months of June, July and August, 1827, on the Particles contained in the pollen of plants; and on the general existence of active molecules in organic and inorganic bodies, Philosophy Magazine (4) 161-173, 1828.
12. Cussler E.L. Diffusion: Mass Transfer in Fluid Systems 1997, Cambridge University Press. second ed.
13. Tayor G.I. Diffusion by continuous movements. Proceedings of the London Mathematical Society 1921, vol. A20:196.
14. Einstein A. Investigation on the Theory of Brownian Movement 1956, Dover, New, York.
15. Taylor G.I. Dispersion of soluble matter in solvent flowing slowly through a tube. Proceedings of the Royal Society A 1953, 219:186-203.
16. Brenner H., Edwards D.A. Macrotransport Processes 1993, Butterworth-Heinemann, Boston.
17. Aris R. On the dispersion of a solute in a fluid flowing through a tube. Proceedings of the Royal Society A 1956, 235:67-77.
18. Aris R. On the dispersion of a solute in a pulsating flow through a tube. Proceedings of the Royal Society A 1960, 259:370-376.
19. Fife P. Singular perturbation problems whose degenerate forms have many solutions. Applicable Analysis 1972, 1:331-358.
20. Fife P., Nicholes K. Dispersion in flow through small tubes. Proceedings of the Royal Society A 1975, 344:131-145.
21. Gill W.N. A note on the solution of transient dispersion problems. Proceedings of the Royal Society A 1967, 298:335-339.
22. Gill W.N., Sankarasubramanian R. A note on the solution of transient dispersion problems. Proceedings of the Royal Society A 1970, 316:341-350.
23. Yamanaka T. Projection operator theoretical approach to unsteady convective diffusion phenomena. Journal of Chemical Engineering of Japan 1983, 16:29-35.
24. Watt S.D., Roberts A.J. The accurate dynamic modelling of contaminant dispersion in channels. SIAM Journal of Applied Mathematics 1995, 55:1016-1038.
25. Johns L.E., Degance A.E. Dispersion approximations to the multicomponent convective diffusion equation for chemically active systems. Chemical Engineering Science 1975, 30:1065-1067.
26. Yamanaka T., Inui S. Taylor dispersion models involving nonlinear irreversible reactions. Journal of Chemical Engineering of Japan 1994, 27:434-435.
27. Bloechle B.W. On Taylor Dispersion of Reactive Solutes in a Parallel-Plate Fracture-Matrix Syste 2001, PhD Thesis, University of Colorado.
28. Dutta D., Ramachandran A., Leighton D.T. Effect of channel geometry on solute dispersion in pressure-driven microfluidic systems. Microfluidics and Nanofluidics 2006, 2:275-290.
29. Ajdari A., Bontoux N., Stone H.A. Hydrodynamic dispersion in shallow microchannels: the effect of cross-section shape. Analytical Chemistry 2006, 78:387-392.
30. Aref H. Stirring by chaotic advection. Journal of Fluid Mechanics 1984, 143:1-21.
31. Wiggins S., Ottino J.M. Foundations of chaotic mixing. Proceedings of the Royal Society A 2004, 362:937-970.
32. Lorenz E.N. Deterministic nonperiodic flow. Journal of the Atmospheric Sciences 1963, 20:130-141.
33. Dean W.R. Note on the motion of a fluid in a curved pipe. Philosophy Magazine 1927, 4:208-223.
34. Berger S.A., Talbot L., Yao L.S. Flow in curved pipes. Annual Reviews of Fluid Mechanics 1983, 15:461-512.
35. Gratton M.B. The Effects of Torsion on Anomalous Diffusion in Helical Pipe 2002, Thesis, Department of Mathematics, Harvey Mudd College.
36. Germano M. On the effect of torsion on helical pipe flow. Journal of Fluid Mechanics 1982, 203:1-8.
37. Jones S.W., Thomas O.M., Aref H. Chaotic advection by laminar flow in a twisted pipe. Journal of Fluid Mechanics 1989, 209:335-367.
38. Hadamard J. Movement permanent lent D'une sphere liquide et visqueuse dans un liquide visqueux. Comptes Rendus 1911, 152:1735.
39. Stone Z.B., Stone H.A. Imaging and quantifying mixing in a model droplet micromixer. Physics of Fluids 2005, 17:1-11.
40. Grigoriev R.O., Schatz M.F., Sharma V. Chaotic mixing in microdroplets. Lab Chip 2006, 6:1369-1372.
41. Rodd L.E., Scott T.P., Boger D.V., Copper-White J.J., McKinley G.H. The inertio-elastic planar entry flow of low-viscosity elastic fluids in micro-fabricated geometries. Journal of Non-Newtonian Fluid Mechanics 2005, 129:1-22.
42. Chen C.H., Lin H., Lele S.K., Santiago J.G. Convective and absolute electrokinetic instability with conductivity gradients. Journal of Fluid Mechanics 2005, 524:263-303.
43. Levich V.G. Physicochemical Hydrodynamics 1962, Prentice-Hall, Englewood Cliffs.
44. Rosenzweig R.E. Ferrohydrodynamics 1985, Cambridge University Press, Cambridge.
45. Love L.J., Jansen J.F., McKnight T.E., Roh Y., Phelps T.J. A magnetocaloric pump for microfluidic applications. IEEE Transactions on Nanobioscience 2004, 3:101-110.
46. Bird R.B., Stewart W.E., Lightfoot E.N. Transport Phenomena 2007, John Wiley & Sons Inc, New York. Second ed.
47. Paris D.T., Hurd F.K. Basic Electromagnetic Theory 1969, McGraw-Hill Inc, New York.
48. Edward J.R., Michael J.C. Electromagnetics 2001, CRC Press LLC, Boca Raton, Florida.
49. Rosensweig R.E. Ferrohydrodynamics 1985, Cambridge University Press, Cambridge.
50. Bhattacharjee P., Riahi D.N. Numerical Study of Surface Tension Driven Convection in Thermal Magnetic Fluids 2005, IDEALS TAM Reports 1081, University of Illinois. http://hdl.handle.net/2142/339.
51. Osher S., Sethian J.A. Fronts propagating with curvature-dependent speed: Algorithms based on Hamilton-Jacobi formulations. J. Comput. Phys. 1988, 79:12-49.
52. Brackbill J.U., Kothe D.B., Zemach C. A continuum method for modelling surface tension. J. Comput. Phys. 1992, 100:335-354.
53. Sussman M., Smereka P., Osher S. A level set approach for computing solution to incompressible two-phase flow. J. Comput. Phys. 1994, 114:146-159.
54. Peng D., Merriman B., Osher S., Zhao H., Kang M. A PDE-based fast local level-set method. J. Comput. Phys. 1999, 155:410-438.
55. Enright D., Fedkiw R., Ferziger J., Mitchell I. A hybrid particle level set method for improved interface capturing. J. Comput. Phys. 2002, 183:83-116.
56. Hirt C.W., Nichols B.D. Volume of fluid (VOF) method for the dynamics of free boundaries. J. Comput. Phys. 1981, 39:201-225.
57. Glimm J., Grove J.W., Li X.L., Shyue K.M., Zeng Y., Zhang Q. Three-dimensional front-tracking. SIAM J. Sci. Comput. 1998, 19:702-723.
58. Unverdi S.O., Tryggvason G. A front-tracking method for viscous, incompressible, multi-fluid flows. J. Comput. Phys. 1992, 100:25-37.
59. Patankar S.V. Numerical Heat Transfer and Fluid Flow 1980, Hemisphere Publisher, New York.
60. Versteeg H.K., Malalasekera W. An Introduction to Computational Fluid Dynamics: the Finite Volume Method 2007, Prentice Education Limited, England. Second ed.
61. van Leer B. Towards the ultimate conservative difference scheme. V. A second-order sequel to Godunov's method. J. Comput. Phys. 1979, 32:101-136.
62. Sweby P.K. High resolution schemes using flux limiters for hyperbolic conservation laws. SIAM J. Num. Anal. 1984, 21-5:995-1011.
63. P.L. Roe, M.J. Baines, Algorithms for advection and shock problems, in: Proc. of the 4th GAMM Conf. on Num. Meth. in Fluid Mech., Paris, France, Oct. 7-9, 1981.
64. P.L. Roe, Some contributions to the modelling of discontinuous flows, in: Proc. of the 15th Summer Seminar on App. Math., La Jolla, CA, Jun. 27-Jul. 8, 1983.
65. Jiang G.S., Peng D. Weighted ENO schemes for Hamilton-Jacobi equations. SIAM J. Sci. Comput. 2000, 21:2126-2143.
66. Shu C.W., Osher S. Efficient Implementation of Essentially Non-Oscillatory Shock Capturing Schemes. J. Comput. Phys. 1988, 77:439-471.
67. Roache P.J. Code verification by the method of manufactured solution. J. Fluids Eng. 2002, 124:4-10.
68. Hwar C.K., Hirsh R.S., Taylor T.D. A pseudospectral method for solution of the three-dimensional incompressible Navier-Stokes equations. J. Comput. Phys. 1987, 70:439-462.
69. Sheu T.W.H., Yu C.H., Chiu P.H. Development of a dispersively accurate conservative level set scheme for capturing interface in two-phase flows. J. Comput. Phys. 2009, 228:661-686.
70. Zhao Y., Tan H.H., Zhang B. A high-resolution characteristics-based implicit dual time-stepping VOF method for free surface flow simulation on unstructured grids. J. Comput. Phys. 2002, 183:233-273.
71. Nguyen N.T., Ting T.H., Yap Y.F., Wong T.N., Chai J.C. Thermally mediated droplet formation in microchannels. Appl. Phys. Lett. 2007, 91:084102.
72. Madou M.J. Fundamentals of Microfabrication: The Science of Miniaturization 2002, CRC Press, Boca Raton, FL. 2nd ed.
73. Thompson L.F., Willson C.G., Bowden M.J. Introduction to Microlithography 1994, American Chemical Society, Washington, D.C.
74. Friedrich H., Widmann D., Mader H. Technologie Hochintegrierter Schaltungen 1996, Springer-Verlag, Berlin.
75. Adams A.C. Dielectric and polysilicon film deposition. VLSI Technology 1988, 233-271. McGraw-Hill, New York. S.M. Sze (Ed.).
76. Monreal G., Mari C.M. The use of polymer materials as sensitive elements in physical and chemical sensors. J. Micromech. Microeng. 1997, 7(3):121-124.
77. Polymer Applications for Biotechnology: Macromolecular Separation and Identification 1992, Prentice-Hall, Upper Saddle River, NJ. D. Soane (Ed.).
78. G.T.A. Kovacs, N.I. Maluf, K.E. Petersen, Bulk micromachining of silicon, in: Proceedings of the IEEE, vol. 86, 8, 1998, pp. 1536-1551.
79. Williams K.R., Muller R.S. Etch rates for micromachining processing. J. Microelectromech. Syst. 1996, 5(4):256-269.
80. Bean K.E., Csepregi L., Heuberger A., Baumgartel H. Anisotropic etching of crystalline silicon in alkaline solutions II: Influence of dopants. J. Electrochem. Soc. 1990, 137(11):3626-3632.
81. Kaminsky G. Micromachining of silicon mechanical structures. J. Vac. Sci. Tech. 1985, B3(4):1015-1024.
82. Kern W. Chemical etching of silicon, germanium, gallium arsenide and gallium phosphide. RCA Review 1978, 39:278-308.
83. 4OH Based etchants for silicon micromachining: influence of additives and stability of passivation layers. Sens. Actuators A Phys. 1990, 25(1-3):1-7.
84. Tabata O., Asahi H., Funabashi H., Shimaoka K., Sugiyama S. Anisotropic etching of silicon in TMAH solutions. Sens. Actuators A Phys. 1992, 34(1):51-57.
85. U. Schnakenberg, W. Beneke, P. Lange, TMAHW etchants for silicon micromachining, in: Proceedings of Transducers '91, 6th International Conference on Solid-State Sensors and Actuators, San Francisco, 23-27 June, 1991, pp. 815-818.
86. K.E. Petersen, Silicon as a mechanical material, in: Proceedings of IEEE, vol. 70, 1982, pp. 420-457.
87. Mehregany M., Senturia S.D. Anisotropic etching of silicon in hydrazine. Sens. Actuators A Phys. 1988, 13(4):375-390.
88. Linde H., Austin L. Wet silicon etching with aqueous amine gallates. J. Electrochem. Soc. 1992, 139(4):1170-1174.
89. V. Lehmann, Porous silicon-A new material for MEMS, Proceedings of MEMS '96, 9th IEEE international workshop micro electromechanical system, San Diego, CA, 11-15 February, 1996, pp. 1-6.
90. P. Lärmer, Method of Anisotropically Etching Silicon, German Patent DE 4 241 045, 1994.
91. D. Sobek, S.D. Senturia and M.L. Gray, Microfabricated Fused Silica Flow Chambers for Flow Cytometry, Technical digest of the IEEE solid state sensor and actuator workshop, Hilton Head Island, SC, 13-16 June, 1994, pp. 260-263.
92. Harrison D.J., Fluri K., Seiler K., Fan Z.H., Effenhauser C.S., Manz A. Micromachining a miniaturized capillary electrophoresis-based chemical-analysis system on a chip. Science 1993, 261:895-897.
93. Jacobson S.C., Hergenroder R., Kountry L.B., Ramsey J.M. High-speed separations on a microchip. Analytical Chemistry 1994, 66:1114-1118.
94. Ehrfeld W., Hessel V., Mobius H., Richter T., Russow K. Potentials and realization of microreactors, microsystem technology for chemical and biological microreactors. Dechema monographs 1996, 132:1-28.
95. L. Jiang, M. Wong and Y. Zohar, A Micro-Channel Heat Sink with Integrated Temperature Sensors for Phase Transition Study, in: Proceedings of MEMS '99, 12th IEEE international workshop micro electromechanical system, Orlando, FL, 17-21 January, 1999, pp. 159-164.
96. Chen J., Wise K.D. A high resolution silicon monolithic nozzle array for inkjet printing. IEEE Transaction on Electron Devices 1997, 44(9):1401-1409.
97. Chen J., Wise K.D., Hetke J.F., Bledsoe S.C. A multichannel neural probe for selective chemical delivery at the cellular level. IEEE Transaction on Biomedical Engineering 1997, 44(8):760-769.
98. R.W. Tjerkstra, M. de Boer, E. Berenschot, J.G.E. Gardeniers, A. van den Berg, K. Elwenspoek, Etching technology for microchannels, in: Proceedings of MEMS '97, 10th IEEE international workshop micro electromechanical system, Nagoya, Japan, 26-30 January, 1997, pp. 147-151.
99. de Boer M.J., Tjerkstra R.W., Berenschot J.W., Jansen M.V., Burger C.J., Gardenter J.G.E., Elwenspoek M., van den Berg A. Micromachining of buried micro channels in silicon. J. Microelectromech. Syst. 2000, 9(1):94-103.
100. L. Lin, A.P. Pisano and R.S. Muller, Silicon processed microneedles, in: Proceedings of transducers '93, 7th international conference on solid-state sensors and actuators, Yokohama, Japan, 7-10 June, 1993, pp. 237-240.
101. S. Wu, J. Mai, Y. Zohar, Y.C. Tai, C.M. Ho, A suspended microchannel with integrated temperature sensors for high-pressure flow studies, in: Proceedings of MEMS '98, 11th IEEE international workshop micro electromechanical system, Heidelberg, Germany, 25-29 January, 1998, pp. 87-92.
102. V.L. Spiering, J.N. van der Moolen, G.J. Burer, A. van den Berg, Novel microstructures and technologies applied in chemical analysis techniques, in: Proceedings of transducers '97, 9th international conference on solid-state sensors and actuators, Chicago, IL, 16-19 June, 1997, pp. 511-514.
103. Papautsky I., Brazzle J., Swerdlow H., Weiss R., Frazier F.B. Micromachined pipette arrays. IEEE Transaction on Biomedical Engineering 2000, 47(6):812-819.
104. E.T. Carlen and C.H. Mastrangelo, Paraffin actuated surface micromachined valves, in: Proceedings of MEMS '00, 13th IEEE international workshop micro electromechanical system, Miyazaci, Japan, 23-27 January, 2000, pp. 381-385.
105. Auciello O., Birrell J., Carlisle J.A., Gerbi J.E., Xiao X., Peng B., Espinosa H.D. Materials science and fabrication processes for a new MEMS technology based on ultrananocrystalline diamond thin films. J. Phys. Condens. Mat. 2004, 16:R539-R552.
106. Gurbuz Y., Esame O., Tekin I., Kang W.P., Davidson J.L. Diamond semiconductor technology for RF device applications. Solid-State Electron. 2005, 49:1055-1070.
107. Mehregany M., Zorman C.A., Roy S., Flischman A.J., Wu C.H., Rajan N. Silicon carbide for microelectromechanical systems. International Materials Reviews 2000, 45:85-108.
108. Okojie R.S., Ned A.A., Kurtz A.D. Operation of (6H)-SiC pressure sensor at 500°C. Sens. Actuators A Phys. 1998, 66:200-204.
109. Rajan N., Mehregany M., Zorman C.A., Stefanescu S., Kicher T.P. Fabrication and testing of micromachined silicon carbide and nickel fuel atomizers for gas turbine engines. J. Microelectromech. Syst. 1999, 8:251-257.
110. Kotzar G., Freas M., Abel P., Fleischman A., Roy S., Zorman C., Moran J.M., Melzak J. Evaluation of MEMS materials of construction for implantable medical device. Biomaterials 2002, 23:2737-2750.
111. Voskerician G., Shive M.S., Shawgo R.S., von Recum H., Anderson J.M., Cima M.J., Langer R. Biocompatability and biofouling of MEMS drug delivery device. Biomaterials 2003, 24:1959-1967.
112. Hernandez P.R., Taboada C., Leijia L., Tsutsumi V., Vazquez B., Valdes-Perezgasga F., Reyes J.L. Evaluation of biocompatibility of pH-ISFET materials during long-term subcutaneous implantation. Sens. Actuators B Chem. 1998, 46:133-138.
113. A.C.R. Grayson, R.S. Shawgo, A.M. Johnson, N.T. Flynn, Y. Li, M.J. Cima and R.A. Langer, BioMEMS review: MEMS technology for physiologically integrated devices, in: Proceedings of the IEEE, vol. 92, 2004, pp. 6-21.
114. Ziaie B., Baldi A., Lei M., Gu Y., Sigel R.A. Hard and soft micromachining for BioMEMS: review of techniques and examples of application in microfluidics and drug delivery. Adv. Drug Deliv. Rev. 2004, 56:145-172.
115. Whitesides G.M., Ostuni E., Takayama S., Jiang X., Ingber D.E. Soft lithography in biology and biochemistry. Annu. Rev. Biomed. Eng. 2001, 3:335-373.
116. Lendlein A., Kelch S. Shape memory polymers. Angew. Chem. Int. Ed. 2002, 41:2034-2057.
117. Facchetti A., Yoon M.H., Marks T.J. Gate dielectrics for organic field-effect transistor: new opportunities for organic electronics. Adv. Mater. 2005, 17:1705-1725.
118. E.W. Becker, W. Ehrfeld, P. Hagmann, A. Maner, D. Munchmeyer, Fabrication of microstructures with high aspect ratios and great structural heights by synchrotron radiation lithography, glavanoforming, and plastic moulding (LIGA Process), Microelectron. Eng. 4, pp. 35-56.
119. H. Guckel, T.R. Christensen and K.J. Skrobis, Formation of Microstructures Using a Preformed Photoresist Sheet, U.S. Patent #5378583, January 1995.
120. Chaudhuri B., Guckel H., Klein J., Fisher K. Photoresist application for the LIGA process. Microsystem Technologies 1998, 4:159-162.
121. Mohr J., Ehrfeld W., Munchmeyer D. Requirements on resist layers in deep-etch synchrotron radiation lithography. J. Vac. Sci. Tech. 1988, B6:2264-2267.
122. H. Guckel, J. Uglow, M. Lin, D. Denton, J. Tobin, K. Euch, M. Juda, Plasma polymerization of methyl methacrylate: A photoresist for 3D applications, Technical Digest of the IEEE Solid State Sensor and Actuator Workshop, Hilton Head Island, SC, 4-7 June, 1988, pp. 43-46.
123. V. Ghica and W. Glashauser, Verfahren für die Spannungsfreie Entwicklung von Bestrahlten Polymethylmethacrylate-Schichten, German patent, #3039110, 1982.
124. Shaw J.M., Gelorme J.D., la Bianca N.C., Renaud P., Vettiger P. Negative photoresists for optical lithography. IBM Journal of Research and Development 1997, 41:81-94.
125. Lorenz H., Despont M., Fahrni N., la Bianca N., Renaund P., Vettinger P. SU-8: A low-cost negative resist for MEMS. J. Micromech. Microeng. 1997, 7:121-124.
126. Lorenz H., Vettinger P., Renaud P. Fabrication of photoplastic high-aspect ratio microparts and micromolds using SU-8 UV resist. Microsystem Technologies 1998, 4:143-146.
127. MicroChem Corp, NANO™SU-8 Negative Tone Photoresists Formulations 2-25, Data sheets, 2001.
128. MicroChem Corp, NANO™SU-8 Negative Tone Photoresists Formulations 50-100, Data sheets, 2001.
129. Chang H.K., Kim Y.K. UV-LIGA process for high aspect ratio structure using stress barrier and C-shaped etch hole. Sens. Actuators A Phys. 2000, 84:342-350.
130. Ghantasala M.K., Hayes J.P., Harvey E.C., Sood D.K. Patterning, electroplating and removal of SU-8 moulds by excimer laser micromachining. J. Micromech. Microeng. 2001, 11:133-139.
131. Ayliffe H.E., Frazier A.B., Rabbitt R.D. Electric impedance spectroscopy using microchannels with integrated metal electrodes. IEEE J. Microelectromech. Syst. 1999, Vol.8(1):50-57.
132. Jackman R.J., Floyd T.M., Ghodssi R., Schmidt M.A., Jensen J.F. Microfluidic systems with on-line UV detection fabricated in photodefinable epoxy. J. Micromech. Microeng. 2001, 11:263-269.
133. Alderman B.E.J., Mann C.M., Steenson D.P., Chamberlain J.M. Microfabrication of channels using an embedded mask in negative resist. J. Micromech. Microeng. 2001, 11:703-705.
134. L.J. Guerin, M. Bossel, M. Demierre, S. Calmes, Ph. Renaud, Simple and low cost fabrication of embedded micro channels by using a new thick-film photoplastic, Proceedings of transducers '97, 9th international conference on solid-state sensors and actuators, Chicago, IL, 16-19 June, 1997, pp. 1419-1421.
135. Chuang Y.J., Tseng F.G., Cheng J.H., Lin W.K. A novel fabrication method of embedded micro-channels by using SU-8 thick-film photoresists. Sens. Actuators A Phys. 2003, 103:64-69.
136. Tay F.E.H., van Kan J.A., Watt F., Cheong W.O., et al. A novel micro-machining method for the fabrication of thick-film SU-8 embedded micro-channels. J. Micromech. Microeng. 2001, 11:27-32.
137. O'Brien J., Hughes P.J., Bunnet M., O'Neill B., Alderman J., Lane B., O'Riordan A., O'Driscoll C. Advanced photoresist technologies for microsystems. J. Micromech. Microeng. 2001, 11:353-358.
138. Qu W., Wenzel C., Jahn A. One-mask procedure for the fabrication of movable high-aspect-ratio 3D microstructures. J. Micromech. Microeng. 1998, 8:279-283.
139. Conédéra V., Le Goff B., Fabre N. Potentialities of a new positive photoresist for the realization of thick moulds. J. Micromech. Microeng. 1999, 9:173-175.
140. Loechel B. Thick-layer resists for surface micromachining. J. Micromech. Microeng. 2000, 10:108-115.
141. Zhao Y., Cui T. Fabrication of high-aspect-ratio polymer-based electrostatic comb drives using the hot embossing technique. J. Micromech. Microeng. 2003, 13:430-435.
142. Truong T.Q., Nguyen N.T. A polymeric piezoelectric micropump based on lamination technology. J. Micromech. Microeng. 2004, 14:632-638.
143. Nguyen N.T., Ho S.S., Low L.N. A polymeric microgripper with integrated thermal actuators. J. Micromech. Microeng. 2004, 14:969-974.
144. Frazier A.B., Allen M.G. Metallic microstructures fabricated using photosensitive polyimide electroplating molds. J. Microelectromech. Syst. 1993, 2(2):87-94.
145. Ito T., Sawada R., Higurashi E., Kiyokura T. Fabrication of microstructure using fluorinated polyimide and silicon-based positive photoresist. Microsystem Technologies 2000, 6:165-168.
146. Stieglitz T. Flexible biomedical microdevices with double-sided electrode arrangements for neural applications. Sens. Actuators A Phys. 2001, 90:203-211.
147. Metz S., Holzer R., Renaud P. Polyimide-based microfluidic devices. Lab on a Chip 2001, 1(1):29-34.
148. Reed H.A., White G.E., Rao V., Allen S.A.B., Henderson C.L., Kohl P.A. Fabrication of microchannels using polycarbonates as sacrificial materials. J. Micromech. Microeng. 2001, 11:733-737.
149. Bhusari D., Reed H.A., Wedlake M., Padovani A.M., Allen S.A.B., Kohl P.A. Fabrication of air-channel structures for microfluidic, microelectromechanical, and microelectronic applications. J. Micromech. Microeng. 2001, 10:400-408.
150. Piotter V., Hanemann T., Ruprecht R., Haupelt J. Injection molding and related techniques for fabrication of microstructures. Microsystem Technologies 1997, 4:129-133.
151. O. Larsson, O. Ohman, A. Billman, L. Lundbladh, C. Lindell, G. Palmskog, Silicon based replication technology of 3D-microstructures by conventional cd-injection molding techniques, in: Proceedings of transducers '97, 9th international conference on solid-state sensors and actuators, Chicago, IL, 16-19 June, 1997, pp. 1415-1418.
152. Niggemann M., Ehrfeld W., Weber L., Gunther R., Sollbohmer O. Miniaturized plastic micro plates for applications in HTS. Microsystem Technologies 1999, 6:48-53.
153. Gerlach A., Keller W., Schulz J., Schumacher K. Gas permeability of adhesives and their application for hermetic packaging of microcomponents. Microsystem Technologies 2001, 7:17-22.
154. Becker H., Heim U. Hot embossing as a method for the fabrication of polymer high aspect ratio structures. Sens. Actuators A Phys. 2000, 83:130-135.
155. Heckele M., Bacher W., Müller K.D. Hot embossing-the molding technique for plastic microstructures. Microsystem Technologies 1998, 4:122-124.
156. P.F. Man, D.K. Jones and C.H. Mastrangelo, Microfluidic plastic capillaries on silicon substrates: A new inexpensive technology for bioanalysis chips, in: Proceedings of MEMS '97, 10th IEEE international workshop micro electromechanical system, Nagoya, Japan, 26-30 January, 1997, pp. 311-316.
157. Xia Y., Whitesides G.M. Soft lithography. Ann. Review of Material Sciences 1998, 28:153-194.
158. Duffy D.C., McDonald J.C., Schuller O.J.A., Whitesides G.M. Rapid prototyping of microfluidic switches in poly (dimethyl Siloxane) and their actuation by electro-osmotic flow. J. Micromech. Microeng. 1999, 9:211-217.
159. Chin T.S. Permanent magnet films for applications in microelectromechanical systems. J. Magn. Magn. Mat. 2000, 209:75-79.
160. Gibbs M.R.J. Applications of magMEMS. J. Magn. Magn. Mater. 2005, 290-291:1298-1303.
161. Trolier-McKinstry S., Muralt P. Thin film piezoelectrics for MEMS. J. Electroceramics 2004, 12:7-17.
162. Dorey R.A., Whatmore R.W. Electroceramic thick film fabrication for MEMS. J. Electroceramics 2004, 12:19-32.
163. Fu Y., Du H., Huang W., Zhang S., Hui M. TiNi-based thin films in MEMS applications: a review. Sens. Actuators A Phys. 2004, 112:395-408.
164. Lee K.Y., Labianca N., Rishton S.A., Zolgharnain S., Gelorme J.D., Shaw J., Chang T.H.P. Micromachining applications of a high resolution ultra-thick photoresist. J. Vac. Sci. Tech. B 1995, 13:3012-3016.
165. Malek C.K., Saile V. Applications of LIGA technology to precision manufacturing of high-aspect-ratio micro-components and -systems: a review. Microelectronics J. 2004, 35:131-143.
166. Schoth A., Förster R., Menz W. Micro wire EDM for high aspect ratio 3D microstructuring of ceramics and metals. Microsystem Technologies 2005, 11:250-253.
167. Schuster R., Kirchner V., Allongue P., Ertl G. Electrochemical micromachining. Science 2000, 289:98-101.
168. Wüthrich R., Fasciob V. Machining of non-conducting materials using electrochemical discharge phenomenon-an overview. Int. J. Mach. Tool. Manufact. 2005, 45:1095-1108.
169. Reyntjens S., Puers R. A review of focused ion beam applications in microsystem technology. J. Micromech. Microeng. 2001, 11:287-300.
170. Chichkov B.N., Momma C., Note S., von Alvensleben F., Tunnermann A. Femtosecond, picosecond and nanosecond laser ablation of solids. Appl. Phys. A 1996, 63:109-115.
171. Laws R.A., Holmes A.S., Goodall F.N. The formation of moulds for 3D microstructures using excimer laser ablation. Microsystem Technologies 1996, 3:17-19.
172. Belloy E., Thurre S., Walckiers E., Sayah A., Gijs M.A.M. The introduction of powder blasting for sensor and microsystem applications. Sens. Actuators A Phys. 2000, 84:330-337.
173. Wensink H., Jansen V.H., Berenschot J.W., Elwenspoek M.C. Mask materials for powder blasting. J. Micromech. Microeng. 2000, 10:175-180.
174. Schlaumann S., Wensink H., Schasfoort R., Elwenspoek M., van den Berg A. Powder-blasting technology as an alternative tool for microfabrication of capillary electrophoresis chips with integrated conductivity sensors. J. Micromech. Microeng. 2001, 11:386-389.
175. Stjernström M., Roeraade J. Method for fabrication of microfluidic system in glass. J. Micromech. Microeng. 1998, 8:33-38.
176. D.W. Matson, P.M. Martin, W.D. Bennett, D.C. Stewart, C.C. Bonham, Laminated ceramic components for micro fluidic applications, in: SPIE Conference Proceeding 3877: microfluidic devices and systems II, Santa Clara, CA, 20-22 September, 1999, pp. 95-100.
177. P.M. Martin, W.D. Bennett, D.J. Hammerstrom, J.W. Johnston, D.W. Matson, Laser micromachined and laminated microfluidic components for miniaturized thermal, chemical and biological systems, in: SPIE Conference proceedings, 3680: Design, Test, and Microfabrication of MEMS and MOEMS, Paris, France, 30 March-1 April, 1999, pp. 826-833.
178. Ko W.H., Suminto J.T., Yeh G.J. Bonding techniques for microsensors. Micromachining and Micropackaging of Transducers 1985, 41-61. Elsevier, Amsterdam. C.D. Fung (Ed.).
179. Weckwerth M.V., Simmons J.A., Harff N.E., Sherwin M.E., Blount M.A., Baca W.E., Chui H.C. Epoxy bond and stop-etch (EBASE) technique enabling backside processing of (Al)GaAs heterostructures. Superlattice. Microst. 1996, 20(4):561-567.
180. H. Nguyen, P. Patterson, H. Toshiyoshi, M.C. Wu, A substrate-independent wafer transfer technique for surface-micromachined devices, in: Proceedings of MEMS '00, 13th IEEE international workshop micro electromechanical system, Miyazaci, Japan, 23-27 January, 2000, pp. 628-632.
181. Kamholz A.E., Weigl B.H., Finlayson B.A., Yager P. Quantitative analysis of molecular interaction in microfluidic channel: The T-Sensor. Anal. Chem. 1999, 71:5340-5347.
182. Ismagilov R.F., Stroock A.D., Kenis P.J.A., Whitesides G., Stone H.A. Experimental and theoretical scaling laws for transverse diffusive broadening in two-phase laminar flows in microchannels. Appl. Phys. Lett. 2000, 76:2376-2378.
183. Kamholz A.E., Yager P. Molecular diffusive scaling laws in pressure-driven microfluidic channels: deviation from one-dimensional Einstein approximations. Sens. Actuators B Chem. 2002, 82:117-121.
184. Hinsmann P., Frank J., Svasek P., Harasek M., Lendl B. Design, simulation and application of a new micromixing device for time resolved infrared spectroscopy of chemical reactions in solutions. Lab Chip 2001, 1:16-21.
185. Hessel V., Hardt S., Loewe H., Schoenfeld F. Laminar mixing in different interdigital micromixers: I. Experimental characterization. AIChE J. 2003, 49:566-577.
186. Hardt S., Schoenfeld F. Laminar mixing in different interdigital micromixers: II. Numerical simulations. AIChE J. 2003, 49:578-584.
187. Haverkamp V., Ehrfeld W., Gebauer K., Hessel V., Loewe H., Richter T., Wille C. The potential of micromixers for contacting of disperse liquid phases. Fresenius. J. Anal. Chem. 1999, 364:617-624.
188. Bessoth F.G., de Mello A.J., Manz A. Microstructure for efficient continuous flow mixing. Anal. Commun. 1999, 36:213-215.
189. Kakuta M., et al. Micromixer-based time-resolved NMR: applications to ubiquitin protein conformation. Anal. Chem. 2003, 75:956-960.
190. Knight J.B., Vishwanath A.P., Brody J., Austin R. Hydrodynamic focusing on a silicon chip: mixing nanoliters in microseconds. Phys. Rev. Lett. 1998, 80:3863-3866.
191. Wu Z., Nguyen N.T. Rapid mixing using two-phase hydraulic focusing in microchannels. Biomed. Microdevices 2005, 7:13-20.
192. Jensen K. Chemical kinetics: smaller, faster chemistry. Nature 1998, 393:735-736.
193. Walker G.M., Ozers M.S., Beebe D.J. Cell infection within a microfluidic device using virus gradients. Sens. Actuators B Chem. 2004, 98:347-355.
194. Yi M., Bau H.H. The kinematics of bend-induced mixing in micro-conduits. Int. J. Heat Fluid Flow 2003, 24:645-656.
195. Wong S.H., Ward M.C.L., Wharton C.W. Micro T-mixer as a rapid mixing micromixer. Sens. Actuators B Chem. 2004, 100:365-385.
196. Lim D.S.W., Lim D.S.W., Shelby J.P., Kuo J.S., Chiu D.T. Dynamic formation of ring-shaped patterns of colloidal particles in microfluidic systems. Appl. Phys. Lett. 2003, 83:1145-1147.
197. Wong S.H., Bryant P., Ward M., Wharton C. Investigation of mixing in a cross-shaped micromixer with static mixing elements for reaction kinetics studies. Sens. Actuators B Chem. 2003, 95:414-424.
198. Gobby D., Angeli P., Gavriilidis A. Mixing characteristics of T-type microfluidic mixers. J. Micromech. Microeng. 2001, 11:126-132.
199. Groisman A., Steinberg V. Efficient mixing at low Reynolds number using polymer additives. Nature 2001, 410:905-908.
200. Gan H.Y., Lam Y.C., Nguyen N.T., Yang C., Tam K.C. Efficient mixing of viscoelastic fluids in a microchannel at low Reynolds number. Microfluid Nanofluidics 2006, 3:101-108.
201. Schoenfeld F., Hessel V., Hofmann C. An optimised split-and-recombine micro-mixer with uniform chaotic mixing. Lab Chip 2004, 4:65-69.
202. S. Wiggins and J.M. Ottino, Foundation of chaotic mixing, Phil. Trans. R. Soc. Lond. A, Vol. 362, pp. 937-970.
203. Ottino J.M., Wiggins S. Introduction: mixing in microfluidics. Phil. Trans. R. Soc. Lond. A 2004, 362:923-935.
204. Branebjerg J., Gravesen P.K.P., Nielsen J., Rye C. Fast mixing by lamination. Proceedings of the IEEE Micro Electro Mechanical Systems (MEMS) 1996, 441-446.
205. Schwesinger N., Frank T., Wurmus H. A modular microfluid system with an integrated micromixer. J. Micromech. Microeng. 1996, 6:99-102.
206. Gray B.L., Jaeggi D., Mourlas N.J., Van Drieenhuizen B.P., Williams K.R., Maluf N.I., Kovacs G.T.A. Novel interconnection technologies for integrated microfluidic systems. Sens. Actuators A Phys. 1999, 77:57-65.
207. He B., Burke B.J., Zhang X., Zhang R., Regnier F.E. A picoliter-volume mixer for microfluidic analytical systems. Anal. Chem. 2001, 73:1942-1947.
208. Tan C.K.L., Tracey M.C., Davis J.B., Johnston I.D. Continuously variable mixing-ratio micromixer with elastomer valves. J. Micromech. Microeng. 2005, 15:1885-1893.
209. Nguyen N.T., Huang X.Y. Mixing in microchannels based on hydrodynamic focusing and time-interleaved segmentation: modelling and experiment. Lab Chip 2005, 5:1320-1326.
210. Nguyen N.T., Huang X.Y. Modeling, fabrication and characterization of a polymeric micromixer based on sequential segmentation. Biomed. Microdevices J. 2006, 8:133-139.
211. Jeon N.L., Dertinger S.K.W., Chiu D.T., Choi I.S., Stroock A.D., Whitesides G.M. Generation of solution and surface gradients using microfluidic systems. Langmuir 2000, 16:8311-8316.
212. Deringer S.K.W., Chiu D.T., Jeon N.L., Whitesides G.M. Generation of gradients having complex shapes using microfluidic networks. Anal. Chem. 2001, 73:1240-1246.
213. Campbell K., Groisman A. Generation of complex concentration profiles in microchannels in a logarithmically small number of steps. Lab Chip 2007, 7:264-272.
214. Amarie D., Glazier J.A., Jacobson S.C. Compact microfluidic structures for generating spatial and temporal gradients. Anal. Chem. 2007, 79:9471-9477.
215. Irimia D., Liu S.Y., Tharp W.G., Samasani A., Toner M., Poznansky M.C. Microfluidic system for measuring neutrophil migratory responses to fast switches of chemical gradients. Lab Chip 2006, 6:191-198.
216. Saadi W., Rhee S.W., Lin F., Vahidi B., Chung B.G., Jeon N.L. Generation of stable concentration gradients in 2D and 3D environments using a microfluidic ladder chamber. Biomed. Microdevices 2007, 9:627-635.
217. Atencia J., Morrow J., Locascio L.E. The microfluidic palette: a diffusive gradient generator with spatio-temporal control 2009, 9:2707-2714.
218. Diao J.P., Young L., Kim S., Fogarty E.A., Heilman S.M., Zhou P., Shuler M.L., Wu M.M., DeLisa M.P. A three-channel microfluidic device for generating static linear gradients and its application to the quantitative analysis of bacterial chemotaxis. Lab Chip 2009, 9:1797-1800.
219. Wu H.K., Huang B., Zare R.N. Generation of complex, static solution gradients in microfluidic channels. J. Am. Chem. Soc. 2006, 128:4194-4195.
220. Keenan T.M., Hsu C.H., Folch A. Microfluidic "jets" for generating steady-state gradients of soluble molecules on open surfaces. Appl. Phys. Lett. 2006, 89:114103.
221. Chung B.G., Lin F., Jeon N.L. A microfluidic multi-injector for gradient generation. Lab Chip 2006, 6:764-768.
222. Wiggins S., Ottino J.M. Foundation of chaotic mixing. Phil. Trans. R. Soc. Lond. A 2004, 362:937-970.
223. Bothe D., Stemich C., Warnecke H.J. Fluid mixing in a T-shaped micro-mixer. Chem. Eng. Sci. 2006, 61:2950-2958.
224. Hoffmann M., Schlüter C., Räbiger N. Experimental investigation of liquid-liquid mixing in T-shaped micro-mixers using μ-LIF and μ-PIV. Chem. Eng. Sci. 2006, 61:2968-2976.
225. Nguyen N.T., Bochnia D., Kiehnscherf R., Dötzel W. Investigation of forced convection in micro-fluid systems. Sens. Actuators A Phys. 1996, 55:49-55.
226. Wong S.H., Ward M.C.L., Wharton C.W. Micro T-mixer as a rapid mixing micromixer. Sens. Actuators B Phys. 2004, 359-379.
227. Kockmann N., Kiefer T., Engler M., Woias P. Silicon microstructures for high throughput mixing devices. Microfluidics and Nanofluidics 2006, 4:327-335.
228. Wang H., Iovenitti P., Harvey E., Masood S. Optimizing layout of obstacles for enhanced mixing in microchannels. Smart Mater. Struct. 2002, 11:414-424.
229. Lin Y., Gerfen G.J., Rousseau D.L., Yeh S.R. Ultrafast microfluidic mixer and freeze-quenching device. Anal. Chem. 2003, 75:5381-5386.
230. Jiang F., Drese K.S., Hardt S., Küpper M., Schönfeld F. Helical flows and chaotic mixing in curved micro channels. AIChE J. 2004, 50:2297-2305.
231. Mengeaud V., Josserand J., Girault H.H. Mixing processes in a zigzag microchannel: finite element simulation and optical study. Anal. Chem. 2002, 74:4279-4286.
232. Yi M.Q., Bau H.H. The kinematics of bend-induced mixing in micro-conduits. Int. J. Heat and Fluid Flow 2003, 24:645-656.
233. Liu R.H., Stremler M.A., Sharp K.V., Olsen M.G., Santiago J.G., Adrian R.J., Aref H., Beebe D.J. Passive mixing in a three-dimensional serpentine microchannel. J. Microelectromech. Syst. 2000, 9:190-197.
234. Vijiayendran R.A., Motsegood K.M., Beebe D.J., Leckband D.E. Evaluation of a three-dimensional micromixer in a surface-based biosensor. Langmuir 2003, 19:1824-1828.
235. Chen H., Meiners J.C. Topologic mixing on a microfluidic chip. Appl. Phys. Lett. 2004, 84:2193-2195.
236. Hong C.C., Choi J.W., Ahn C.H. A novel in-plane microfluidic mixer with modified tesla structures. Lab on a Chip 2004, 4:109-113.
237. Mizuno Y., Funakoshi M. Chaotic mixing due to a spatially periodic three-dimensional flow. Fluid Dynam. Res. 2002, 31:129-149.
238. Jeon M.K., Kim J.H., Noh J., Kim S.H., Park H.G., Woo S.I. Design and characterization of a passive recycle micromixer. J. Micromech. Microeng. 2005, 15:346-350.
239. Park S.J., Kim J.K., Park J., Chung S., Chung C., Chang J.K. Rapid three-dimensional passive rotation micromixer using the breakup process. J. Micromech. Microeng. 2004, 14:6-14.
240. Sudarsan A.P., Ugaz V.M. Multivortex micromixing. PNAS 2006, 103:7228-7233.
241. Sudarsan A.P., Ugaz V.M. Fluid mixing in planar spiral microchannels. Lab on a Chip 2006, 6:74-82.
242. Simonnet C., Croisman A. Chaotic mixing in a steady flow in a microchannel. Phys. Rev. Lett. 2005, 94:134501.
243. Kim D., Lee S.H., Kwon T.H., Ahn C.H. A serpentine laminating micromixer combining splitting/recombination and advection. Lab on a Chip 2005, 5:739-747.
244. Xia H.M., Shu C., Wan S.Y.M., Chew Y.T. Chaotic micromixers using two-layer crossing channels to exhibit fast mixing at low Reynolds numbers. Lab on a Chip 2005, 5:748-755.
245. Chang S.H., Cho Y.H. Static micromixers using alternating whirls and lamination. J. Micromech. Microeng. 2005, 15:1397-1405.
246. Stroock A.D., Dertinger S.K.W., Ajdari A., Mezic I., Stone H.A., Whitesides G.M. Chaotic mixer for microchannels. Science 2002, 295:647-650.
247. Stroock A.D., Whitesides G.M. Controlling flows in microchannels with patterned surface charge and topography. Accounts Chem. Res. 2003, 36:597-604.
248. Aubin J., Fletcher D.F., Bertrand J., Xuereb C. Characterization of the mixing quality in micromixers. Chem. Eng. Technol. 2003, 26:1262-1270.
249. Johnson T.J., Ross D., Locascio L.E. Rapid microfluidic mixing. Anal. Chem. 2002, 74:45-51.
250. Schönfeld F., Hard S. Simulation of helical flows in microchannels. AIChE J. 2004, 50:771-778.
251. Hassel D.G., Zimmerman W.B. Investigation of the convective motion through a staggered herringbone micromixer at low Reynolds number flow. Chem. Eng. Sci. 2006, 61:2977-2985.
252. Kang T.G., Kwon T.H. Colored particle tracking method for mixing analysis of chaotic micromixers. J. Micromech. Microeng. 2004, 14:891-899.
253. Lynn N.S., Dandy D.S. Geometrical optimization of helical flow in grooved micromixers. Lab on a Chip 2007, 7:580-587.
254. Howell P.B., Mott D.R., Fertig S., Kaplan C.R., Golden J.P., Oran E.S., Ligler F.S. A microfluidic mixer with grooves placed on the top and bottom of the channel. Lab on a Chip 2004, 5:524-530.
255. Floyd-Smith T.M., Golden J.P., Howell P.B., Ligler F.S. Characterization of passive microfluidic mixers fabricated using soft lithography. Microfluidics and Nanofluidics 2006, 2:180-183.
256. Fu X., Liu S.F., Ruan X.D., Yang H.Y. Research on staggered oriented ridges static micromixers. Sens. Actuators B Chem. 2006, 114:618-624.
257. Kim D.S., Lee S.W., Kwon T.H., Lee S.S. A barrier embedded chaotic micromixer. J. Micromech. Microeng. 2004, 14:798-805.
258. Bertsch A., Heimgartner S., Cousseau P., Renaud P. Static micromixers based on large-scale industrial mixer geometry. Lab on a Chip 2001, 1:56-60.
259. Kim D.S., Lee I.H., Kwon T.H., Cho D.W. A barrier embedded kenics micromixer. J. Micromech. Microeng. 2004, 14:1294-1301.
260. Günther A., Jensen K.F. Multiphase microfluidics: from flow characteristics to chemical and materials synthesis. Lab on a Chip 2006, 6:1487-1503.
261. Taylor G.I. The formation of emulsions in definable fields of flow. Proc. R. Soc. Lond. A 1934, 146:501.
262. Garstecki P., Stone H.A., Whitesides G.M. Mechanism for flow-rate controlled breakup in confined geometries: A route to monodisperse emulsions. Phys. Rev. Lett. 2005, 94:164501.
263. Garstecki P., Fuerstman M.J., Stone H.A., Whitesides G.M. Formation of droplets and bubbles in a microfluidic T-junction-scaling and mechanism of break-up. Lab on a Chip 2006, 6. 437-446.
264. Lippmann M.G. Relations entre lesénomèn électriques et capillares. Ann. Chim. Phys. 1875, 5:494-549.
265. Jiao Z., Nguyen N.T., Huang X.Y., Ang Y.Z. Reciprocating thermocapillary plug motion in an externally heated capillary. Microfluidics and Nanofluidics 2006, 3:39-46.
266. Bringer M., Gerdts C.J., Song H., Tice J.D., Ismagilov R.F. Microfluidic systems for chemical kinetics that rely on chaotic mixing in droplets. Phil. Trans. R. Soc. Lond. A 2004, 362:1087-1104.
267. Günther A., Jhunjhunwala M., Thalmann M., Schmidt M.A., Jensen K.F. Micromixing of miscible liquids in segmented gas-liquid flow. Langmuir 2005, 21:1547-1555.
268. Garstecki P., Fuerstman M.J., Fischbach M.A., Sia S.K., Whitesides G.M. Mixing with bubbles: a practical technology for use with portable microfluidic devices. Lab on a Chip 2006, 6:207-212.
269. K. Hosokawa, T. Fujii , I. Endo, Droplet-based nano/picoliter mixer using hydrophobic microcapillary vent, in: Proceedings of the IEEE International Workshop Micro Electromechanical System, Piscataway, NJ, USA, 1999, pp. 388-393.
270. Song H., Bringer M.R., Tice J.D., Gerdts C.J., Ismagilov R.F. Experimental test of scaling of mixing by chaotic advection in droplets moving through microfluidic channels. App. Phys. Lett. 2003, 83:4664-4666.
271. K. Handique and M.A. Burns, Mathematical modeling of drop mixing in a slit-type microchannel, J. Micromech. Microeng. 11 (2001) 548-554.
272. Paik P., Pamula V.K., Fair R.B. Rapid droplet mixers for digital microfluidic systems. Lab on a Chip 2003, 3:253-259.
273. White F.M. Viscous Fluid Flow 1991, McGraw-Hill, New York. second ed.
274. Ducrée J., Haeberle S., Brenner T., Glatzel T., Zengerle R. Patterning of flow and mixing in rotating radical microchannels. Microfluidics and Nanofluidics 2006, 2:97-105.
275. Berg C.H. The rotary motor of bacterial flagella. Annual Review of Biochemistry 2003, 72:19-54.
276. Darnton N., Turner L., Breuer K., Berg H.C. Moving fluid with bacterial carpets. Biophysical Journal 2004, 86:1863-1870.
277. Okkels F., Tabeling P. Spatiotemporal resonances in mixing of open viscous fluids. Physical Review Letters 2004, 92:038301.
278. Dodge A., Hountondji A., Jullien M.C., Tabeling P. Spatiotemporal resonances in a microfluidics system. Physical Review 2004, 92:038301.
279. Jones S., Aref H. Chaotic advection in pulsed source-sink systems. Physics of Fluids 1988, 31:469-485.
280. Hertzsch J.M., Sturman R., Wiggins S. DNA microarrays: design principles for maximizing ergodic, chaotic mixing. Small 2007, 3:202-218.
281. Stremler M.A., Baratunde A.C. Maximum entropy approach to optimal mixing in a pulsed source-sink flow. Physics of Fluids 2006, 18:011701.
282. Deshmukh A.A., Liepmann D., Pisano A.P. Continuous micromixer with pulsatile micropumps 4-8 June, 2000, Technical Digest of the IEEE Solid State Sensor and Actuator Workshop, Hilton Head Island, SC, pp. 73-76.
283. Fujii T., Sando Y., Higashinob K., Fujii Y. A plug and play microfluidic device. Lab on a Chip 2003, 3:193-197.
284. Glasgow I., Aubry N. Enhancement of microfluidic mixing using time pulsing. Lab on a Chip 2003, 3:114-120.
285. Niu X.Z., Lee Y.K. Efficient spatial-temporal chaotic mixing in microchannels. Journal of Micromechanics and Microengineering 2003, 13:454-462.
286. Bottausci F., Mezic I., Meinhart C.D., Cardonne C. Mixing in the shear superposition micromixer: three dimensional analysis. Phys. Trans. R. Soc. Lond. A 2003, 362:1001-1018.
287. Tabeling P., Chabert M., Dodge A., Jullien C., Okkels F. Chaotic mixing in cross-channel micromixers. Phys. Trans. R. Soc. Lond. A 2003, 362:987-1000.
288. Kim M.J., Breuer K.S. Controlled mixing in microfluidic system using bacterial chemotaxis. Analytical Chemistry 2007, 79:955-959.
289. J. Evans, D. Liepmann and A.P. Pisano, Planar laminar mixer, Proc. MEMS97, 10th IEEE Int. Workshop Micro Electromechanical System (Nagoya, Japan), 1997, pp. 96-101.
290. Cola B.A., Schaffer D.K., Fisher T.S., Stremler M.A. A pulsed source-sink fluid mixing device. Journal of Microelectromechanical Systems 2006, 15:259-266.
291. Raynal F., Plaza F., Beuf A., Carriere P. Study of chaotic mixing system for DNA chip hybridization chambers. Physics of Fluids 2004, 16:L63-L66.
292. H. Suzuki and C.M. Ho, A magnetic force driven chaotic micro-mixer, Proceedings of MEMS '02, 15th IEEE International Workshop Micro Electromechanical System, Las Vegas, NV, 20-24 January, 2002, pp. 40-43.
293. Lu L.H., Ryu K.S., Liu C. A magnetic microstirrer and array for microfluidic mixing. Journal of Microelectromechanical Systems 2002, 11:462-469.
294. Agarwal A.K., Sridharamurthy S.S., Beebe D.J., Jiang H. Programmable autonomous micromixers and micropumps. Journal of Microelectromechanical Systems 2005, 14:1409-1421.
295. Schasfoort R.B.M., Schlautmann S., Hendrikse J., Van den Berg A. Field-effect flow control for microfabricated fluidic networks. Science 1999, 286:942-945.
296. Chen C.H., Lin H., Lele S.K., Santiago J.G. Convective and absolute electrokinetic instability with conductivity gradients. Journal of Fluid Mechanics 2005, 524:263-303.
297. Baygents J.C., Baldessari F. Electrohydrodynamic instability in thin fluid layer with an electrical conductivity gradient. Physics of Fluids 1998, 10:301-311.
298. Thaokar R.M., Kumaran V. Electrohydrodynamic instability of the interface between two fluids confined in a channel. Physics of Fluids 2005, 17:084104.
299. Wu N., Russel W.B. Electrohydrodynamic instability of dielectric bilayers: kinetics and thermodynamics. Ind. Eng. Chem. Res. 2006, 45:5455-5465.
300. El Moctar A.O., Aubry N., Batton J. Electro-hydrodynamic micro-fluidic mixer. Lab on a Chip 2003, 3:273-280.
301. Ozen O., Aubry N., Papageorgiou D.T., Petropolos P.G. Monodisperse drop formation in square microchannels. Physical Review Letters 2006, 96:144501.
302. Zahn J.D., Reddy V. Two phase micromixing and analysis using electrohydrodynamic instabilities. Microfluidics and Nanofluidics 2006, 2:399-415.
303. Tsouris C., Culbertson C.T., DePaoli D.W., Jacobson S.C., de Almeida V.F., Ramsey J.M. Electrohydrodynamic mixing in microchannels. AIChE Journal 2003, 49:2181-2186.
304. J. Deval, P. Tabeling and C.M. Ho, A dielectrophoretic chaotic mixer, Proceedings of MEMS '02, 15th IEEE International Workshop Micro Electromechanical System, Las Vegas, NV, 20-24 January, 2002, pp. 36-39.
305. Y.K. Lee, J. Deval, P. Tabeling and C.M. Ho, Chaotic mixing in electrokinetically and pressure driven micro flows, Proceedings of MEMS '01, 14th IEEE International Workshop Micro Electromechanical System, Interlaken, Switzerland, 21-25 January, 2001, pp. 483-486.
306. Oddy M.H., Santiago J.G., Mikkelsen J.C. Electrokinetic instability micromixing. Analytical Chemistry 2001, 73:5822-5832.
307. Posner J.D., Santiago J.G. Convective instability of electrokinetic flows in a cross-shaped microchannel. Journal of Fluid Mechanics 2006, 555:1-42.
308. Fu L.M., Yang R.J., Lin C.H., Chien Y.S. A novel microfluidic mixer utilizing electrokinetic driving forces under low switching frequency. Electrophoresis 2005, 5:1814-1824.
309. Sasaki N., Kitamori T., Kim H.B. AC electroosmotic micromixer for chemical processing in a microchannel. Lab on a chip 2006, 6:550-554.
310. Tang Z., Hong S., Djukic D., Modi V., West A.C., Yardley J., Osgood R.M. Electrokinetic flow control for composition modulation in a microchannel. Journal of Micromechanics and Microengineering 2002, 12:870-877.
311. Lin J.L., Lee K.H., Lee G.B. Active mixing inside microchannels utilizing dynamic variation of gradient zeta potentials. Electrophoresis 2005, 26:4605-4615.
312. Lin J.L., Lee K.H., Lee G.B. Active micro-mixers utilizing a gradient zeta potential induced by inclined buried shielding electrodes. Journal of Micromechanics and Microengineering 2006, 16:757-768.
313. Qian S.Z., Bau H.H. A chaotic electroosmotic stirrer. Analytical Chemistry 2002, 74:3616-3625.
314. Biddiss E., Erickson D., Li D. Heterogeneous surface charge enhanced micromixing for electrokinetic flows. Analytical Chemistry 2004, 76:3208-3213.
315. Yu X., Bau H.H. Complex magnetohydrodynamic low-Reynolds-number flow. Physical Review E 2003, 68:016312.
316. Gleeson J.P., et al. Modelling annular micromixers. SIAM Journal of Applied Mathematics 2004, 64:1294-1310.
317. Qian S., Bau H.H. Magneto-hydrodynamic stirrer for stationary and moving fluids. Sensors and Actuators B 2005, 106:859-870.
318. West J., Gleeson J.P., Aldermann J., Collins J.K., Berney H. Structuring laminar flow using annular magnetohydrodynamic. Sensors and Actuators B 2003, 96:190-199.
319. West J., Karamata B., Lillis B., Gleeson J.P., Alderman J., Collins J.K., Lane W., Mathewson A., Berney H. Application of magnetohydrodynamic actuation to continuous flow chemistry. Lab Chip 2002, 2:224-230.
320. Wu H.Y., Liu C.H. A novel electrokinetic micromixer. Sensors and Actuators A 2005, 118:107-115.
321. Rossing T.D., Fletcher N.H. Principles of Vibration and Sound 1994, Springer, New York.
322. Jang L.S., Chao S.H., Holl M.R., Meldrum D.R. Resonant mode-hopping micromixing. Sensors and Actuators A 2007, doi: 10.1016/j.sna.2007.04.052.
323. R.M. Moroney, R.M. White and R.T. Howe, Ultrasonically induced microtransport, Proceedings of MEMS '91, 3th IEEE International Workshop Micro Electromechanical System, Nara, Japan, January 30-February 4, 1991, pp. 277-282.
324. Rife J.C., Bell M.I., Horwitz J.S., Kabler M.N., Auyeung R.C.Y., Kim W.J. Miniature valveless ultrasonic pumps and mixers. Sensors and Actuators A 2000, 86:135-140.
325. Zhen Y., Goto H., Matsumoto M., Maeda R. Active micromixer for microfluidic systems using lead-zirconate-titanate (PZT)-generated ultrasonic vibration. Electrophoresis 2000, 21:116-119.
326. Yang Z., Matsumoto S., Goto H., Matsumoto M., Maeda R. Ultrasonic micromixer for microfluidic systems. Sensors and Actuators A 2001, 93:266-272.
327. Liu R.H., Yang J., Pindera M.Z., Athavale M., Grodzinski P. Bubble-induced acoustic micromixing. Lab on a Chip 2002, 2:151-157.
328. G.G. Yaralioglu, I.O. Wygant, T.C. Marentis and B.T. Khuri-Yakub, Ultrasonic mixing in microfluidic channels using integrated transducers, Analytical Chemistry, vol. 76, pp. 3694-3698.
329. A.A. Darhuber, et al., Microfluidic actuation by modulation of surface stresses, Applied Physics Letters, vol. 82, pp. 657-659.
330. Nguyen N.T., Wereley S.T. Fundamentals and applications of microfluidics 2006, Artech House, New York. Second ed.
331. Gonzalez R.C., Woods R.E., Eddins S.L. Digital image processing using MATLAB 2004, Pearson Prentice Hall, Upper Saddle River, New Jersey.
332. Posner J.D., Santiago J.G. "Convective instability of electrokinetic flows in a cross-shaped microchannel". J. Fluid. Mech. 2006, 555:1-42.
333. Fournier M.-C., Falk L., Villermaux J. "A new parallel competing reaction system for assessing micromixing efficiency-determination of micromixing time by a sample mixing model". J. Fluid. Mech. 1996, 555:5187-5192.
334. Munson M.S., Yager P. "Simple quantitative optical method for monitoring the extent of mixing applied to a novel microfluidic mixer". Anal. Chim. Acta. 2004, 507:63-71.
335. V. Hessel, A. Renken, J.C. Schoten, J. Yoshida (Eds.), Micro process engineering, vol 2: Devices, reactions and applications, Wiley-VCH, Weinheim.
336. March J. Advanced organic chemistry 1992, Wiley, New York. fourth ed.
337. Ueno M., Hisamoto H., Kitamori T., Kobayashi S. Phase-transfer alkylation reactions using micro reactors. Chem. Commun. 2003, 936-937.
338. Belder D., Ludwig M., Wang L., Reetz M.T. Enantioselective catalysis and analysis on a chip. Angew. Chem. Int. Ed. 2006, 45:2463-2466.
339. Schwalbe T., Autze V., Hohmann M., Stirner W. Novel innovation systems for a cellular approach to continuous process chemistry from discovery to market. Org. Proc. Res. Dev. 2004, 8:440-454.
340. Lu S., Watts P., Chin F.T., Hong J., Musachio J.L., Briad E., Pike V. Synthesis of 11C- and 18F-labeled carboxylic esters within a hydrodynamically-driven micro reactor. Lab Chip 2004, 6:523-525.
341. Suga S., Nagaki A., Yoshida J. Highly selective Friedel-Crafts monoalkylation using micromixing. Chem. Commun. 2003, 3:354-355.
342. Ducry L., Roberge R.M. Controlled autocatalytic nitration of phenol in a microreactor. Angew. Chem. Int. Ed. 2005, 44:7972-7975.
343. Henke L., Winterbauer H. A modular microreactor for mixed acid nitration. Chem. Eng. Technol. 2005, 28:749-752.
344. Loeb P., Loewe H., Hessel V. Fluorinations, chlorinations and brominations of organic compounds in micro reactors. J. Fluor. Chem. 2004, 125:1677-1694.
345. Wiles C., Watts P., Haswell S.J., Pombo-Villar E. The aldol reaction of silyl enol ethers within a micro reactor. Lab Chip 2002, 1:100-101.
346. Fukuyama T., Hino Y., Kamata N., Ryu I. Quick execution of [2+2] type photochemical cycloaddition reaction by continuous reaction by continuous flow system using a glass-made microreactor. Chem. Lett. 2004, 33:1430-1431.
347. Fukuyama T., Kobayashi M., Rahman M.T., Kamata N., Ryu I. Spurring radical reactions of organic halides within hydride and TTMSS using microreactors. Org. Lett. 2008, 10:533-536.
348. Tanaka K., Motomatsu S., Koyama K., Tanaka S.I., Fukase K. Large-scale synthesis of immunoactivating natural product, pristine, by continuous microfluidic dehydration as the key step. Org. Lett. 2007, 10:299-302.
349. Wilson N.G., McCreedy T. On-chip catalysis using a lithographically fabricated glass microreactor - the dehydration of alcohols using sulfated zircon. Chem. Commun. 2000, 9:733-734.
350. Greenway G.M., Haswell S.J., Morgan D.O., Skelton V., Styring P. The use of a novel microreactor for high throughput continuous flow organic synthesis. Sensor. Actuator. B Chem. 2000, 63:153-158.
351. Shi G., Hong F., Liang Q., Fang H., Nelson S., Weber S.G. Capillary-based serial-loading, parallel microreactor for catalyst screening. Anal. Chem. 2006, 78:1972-1979.
352. Lu H., Schmidt M.A., Jensen K.F. Photochemical reactions and on-line UV detection in microfabricated reactors. Lab Chip 2001, 1:22-28.
353. Mukae H., Maeda H., Nashihara S., Mizuno K. One-step synthesis of benzotetra- and benzopentacyclic compounds through intramolecular [2+3] photocycloaddition of alkenes to naphthalene. Angew. Chem. Int. Ed. 2006, 45:6558-6560.
354. Yube K., Mae K. Efficient oxidation of aromatics with peroxides under severe conditions using a microreaction system. Chem. Eng. Technol. 2005, 28:331-336.
355. Mengeaud V., Bagel O., Ferrigno R., Girault H.H., Haider A. A ceramic electrochemical microreactor for the methoxylation of methyl-2-furoate with direct mass spectrometry coupling. Lab Chip 2002, 2:39-44.
356. Chambers R.D., Holling D., Rees A.J., Sandford G. Microreactors for oxidations using fluorine. J. Fluor. Chem. 2003, 119:81-82.
357. Chambers R.D., Fox M.A., Holling D., Nakano T., Okazoe T., Sandford G. Elemental fluorine. Part 16. Versatile thinfilm gas-liquid multi-channel microreactors for effective scale-out. Lab Chip 2005, 5:191-198.
358. Chambers R.D., Holling D., Spink R.C.H., Sandford G. Elemental fluorine. Part 13. Gas-liquid thin film microreactors for selective direct fluorination. Lab Chip 2001, 1:132-137.
359. Ehrlich H., Linke D., Morgenschweis K., Baerns M., Jahnisch K. Application of microstructured reactor technology for the photochemical chlorination of alkylaromatics. Chimia 2002, 56:647-653.
360. Losey M.W., Schmidt M.A., Jensen K.F. Microfabricated multiphase packed bed reactors: characterization of mass transfer and reaction. Ind. Eng. Chem. Res. 2001, 40:2555-2562.
361. Trachsel F., Hutter C., von Rohr Ph.R. Transparent silicon/glass microreactor for high-pressure and high-temperature reactions. Chem. Eng. J. 2008, 135:309-316.
362. Iwasaki T., Yoshida J.I. Free radical polymerization in microreactors, significant improvement in molecular weight distribution control. Macromolecules 2005, 38:1159-1163.
363. Iwasaki T., Kawano N., Yoshida J.I. Radical polymerization using microflow system: numbering-up of microreactors and continuous operation. Org. Proc. Res. Dev. 2006, 10:1126-1131.
364. Wu T., Mei Y., Cabral J.T., Xu C., Beers K.L. A new synthetic method for controlled polymerization using a microfluidic system. J. Am. Chem. Soc. 2004, 126:9880-9881.
365. Inagaki N., Ando T., Sawamoto M., Kamigaito M. Living cationic polymerization with micromixer: syntheses of end-functionalized polymers and multiblock copolymer. Polym. prepr. Jpn. 2004, 53:2416-2417.
366. Pennemann H., Forster S., Kinkel J., Hessel V., Lowe H., Wu L. Improvement of dye properties of the azo pigment yellow 12 using a micromixer-based process. Org. Proc. Res. Dev. 2005, 9:188-192.
367. Wille C., Gabski H.P., Haller T., Kim H., Unverdorben L., Wehle D. Synthesis of pigments in a three-stage microreactor pilot plant-an experimental technical report. Chem. Eng. J. 2004, 101:179-185.
368. Nakamura H., Tashiro A., Yamaguchi Y., Miyazaki M., Watari T., Shimizu H., Maeda H. Application of a microfluidic reaction system for CdSe nanocrystal preparation: their growth kinetics and photoluminescence analysis. Lab Chip 2004, 4:237-240.
369. Chan E.M., Mathies R.A., Alivisatos A.P. Size-controlled growth of CdSe nanocrystals in microfluidic reactors. Nano Lett. 2003, 3:199-201.
370. Wagner J., Kirner T., Mayer G., Albert J., Kohler J.M. Generation of metal nanoparticles in a microchannel reactor. Chem. Eng. J. 2004, 101:251-260.
371. Sonnichsen C., Alivisatos A.P. Gold nanorods as novel nonbleaching plasmon-based orientation sensors for polarized single-particle microscopy. Nano Lett. 2005, 5:301-304.
372. Pattekar A.V., Kothare M.V. A microreactor for hydrogen production in micro fuel cell applications. J. Microelectromech. Syst. 2004, 13:7-18.
373. Holladay J.D., Jones E.O., Phleps M., Hu J. High efficiency and low carbon monoxide micro-scale methanol processors. J. Power Sourc. 2004, 131:69-72.
374. Kwon O.J., Hwang S.M., Chae J.H., Kang M.S., Kim J.J. Performance of a miniaturized silicon reformer-PrOx-fuel cell system. J. Power Sourc. 2007, 165:342-346.
375. Kamholz A.E., et al. Quantitative analysis of molecular interactive in microfluidic channel: the T-sensor. Anal. Chem. 1999, 71:5340-5347.
376. Veenstra T.T. Characterization method for a new diffusion mixer applicable in micro flow injection analysis systems. J. Micromech. Microeng. 1999, 9:199-202.
377. Kakuta M., et al. Micromixer-based time-resolved NMR: Applications to ubiquitin protein conformation. Anal. Chem. 2003, 75:956-960.
378. Fluri K., et al. Integrated capillary electrophoresis devices with an efficient postcolumn reactor in planar quartz and glass chips. Anal. Chem. 1996, 68:4285-4290.
379. Lin Y., et al. Ultrafast microfluidic mixer and freeze-quenching device. Anal. Chem. 2003, 75:5381-5386.
380. Burke B.J., Regnier F.E. Stopped-flow enzyme assays on a chip using a microfabricated mixer. Anal. Chem. 2003, 75:1786-1791.
381. Hadd A.G., et al. Microchip device for performing enzyme assays. Anal. Chem. 1997, 69:3407-3412.
382. Walker G.M., Ozers M.S., Beebe D.J. Cell infection within a microfluidic device using virus gradients. Sensor. Actuator. B Chem. 2004, 98:347-355.
383. Vijiayendran, et al. Evaluation of a three-dimensional micromixer in a surface-based biosensor. Langmuir 2003, 19:1824-1828.
384. Kim D.S., Lee S.H., Ahn C.H., Leed J.Y., Kwon T.H. Disposable integrated microfluidic biochip for blood typing by plastic microinjection moulding. Lab Chip 2006, 6:794-802.
385. Lee N.Y., Yamada M., Seki M. Development of a passive micromixer based on repeated fluid twisting and flattening, and its application to DNA purification. Anal. Bioanal. Chem. 2005, 5:776-782.
386. Lee H.Y., Voldman J. Optimizing micromixer design for enhancing dielectrophoretic microconcentrator performance. Anal. Chem. 2007, 79:1833-1839.
387. Kim S.D., Kim H.J., Jeon N.L. Biological applications of microfluidic gradient devices. Integr. Biol. 2010, 2:584-603.
388. Chung B.G., Choo J.B. Microfluidic gradient platforms for controlling cellular behavior. Electrophoresis 2010, 31:3014-3027.
389. Wang S.J., Saadi W., Lin F., Nguyen C.M.C., Jeon N.L. Differential effects of EGF gradient profiles on MDA-MB-231 breast cancer cell chemotaxis. Exp. Cell Res. 2004, 300:180-189.
390. Abhyankar V.V., Toepke M.W., Cortesio C.L., Lokuta M.A., Hutenlocher A., Beebe D.J. A platform for assessing chemotactic migration within a spatiotemporally defined 3D microenvironment. Lab Chip 2008, 8:1507-1515.
391. Jeon N.L., Baskaran H., Dertinger S.K.W., Whitesides G.M. Neutrophil chemotaxis in linear and complex gradients of interleukin-8 formed in a microfabricated device. Nat. Biotechnol. 2002, 20:826-830.
392. Lin F., Nguyen C.M.C., Wang S.J., Saadi W., Gross S.P., Jeon N.L. Effective neutrophil chemotaxis is strongly influenced by mean IL-8 concentration. Biochem. Biophys. Res. Commun. 2004, 319:576-581.
393. Dertinger S.K.W., Jiang X.Y., Li Z.Y., Murthy V.N., Whitesides G.M. Gradients of substrate-bound laminin orient axonal specification of neurons. Proc. Natl. Acad. Sci. USA. 2002, 99:12542-12547.
394. Chung B.G., Flanagan L.A., Rhee S.W., Schwartz P.H., Lee A.P., Monuki E.S., Jeon N.L. Human neural stem cell growth and differentiation in a gradient-generating microfluidic device. Lab Chip 2005, 5:401-406.
395. Amadi O.C., Steinhauser M.L., Nishi Y., Chung S., Kamm R.D., McMahon A.P., Lee R.T. A low resistance microfluidic system for the creation of stable concentration gradients in a defined 3D microenvironment. Biomed. Microdevices 2010, 12:1027-1041.
396. Barkefors I., Le Jan S., Jakobsson L., Hejll E., Carlson G., Johansson H., Jarvius J., Park J.W., Jeon N.L., Kreuger J. Endothelial cell migration in stable gradients of vascular endothelial growth factor a and fibroblast growth factor 2-Effects on chemotaxis and chemokinesis. J. Biol. Chem. 2008, 283:13905-13912.
397. Shamloo A., Ma N., Poo M.M., Sohn L.L., Heilshorn S.C. Endothelial cell polarization and chemotaxis in a microfluidic device. Lab Chip 2008, 8:1292-1299.
398. Roberge D.M., Durcy L., Bieler N., Cretton P., Zimmermann B. Microreactor technology: a revolution for the fine chemical and pharmaceutical industries?. Chem. Eng. Technol. 2005, 28:318-322.