A plug and play microfluidic device

Lab on a Chip

Volumn 3, Issue 3, 2003, Pages 193-197

  Fujii, Teruo ^a   Sando, Yasuhiro ^b   Higashino, Kusunoki ^b   Fujii, Yasuhisa ^b,c  

^a INSTITUTE OF INDUSTRIAL SCIENCE   (Japan)

^b Konica Corporation   (Japan)

^c Shimogyo ku   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

POLYMER; REAGENT; BAYSILON; DIMETICONE; LUCIFERASE; LUCIFERIN; SILICONE DERIVATIVE;

ARTICLE; CHEMICAL ANALYSIS; CHEMICAL REACTION; DEVICE; FLUID FLOW; MICROFLUIDICS; PRIORITY JOURNAL; PUMP; ANIMAL; CHEMISTRY; DIFFUSION; ELECTRONICS; EQUIPMENT DESIGN; INSTRUMENTATION; KINETICS; LUMINESCENCE; METABOLISM; METHODOLOGY;

ANIMALS; DIFFUSION; DIMETHYLPOLYSILOXANES; ELECTRONICS; EQUIPMENT DESIGN; FIREFLY LUCIFERIN; KINETICS; LUCIFERASES; LUMINESCENT MEASUREMENTS; MICROFLUIDICS; SILICONES;

EID: 2342656359     PISSN: 14730197     EISSN: 14730189     Source Type: Journal    
DOI: 10.1039/b301410j     Document Type: Article

References (38)

1. Enormous number of papers can be found in this monograph series from 1998 to 2002; e.g. Y. Baba, S. Shoji and A. van den Berg eds., Micro Total Analysis Systems 2002, Kluwer Academic Publishers, 2002.
2. D. J. Harrison, K. Fluri, K. Seiler, Z. H. Fan, C. S. Effenhauser and A. Manz, Science, 1993, 261, 895.
3. A. T. Woolley and R. A. Mathies, Proc. Natl. Acad. Sci. USA, 1994, 91, 11348.
4. S. C. Jacobson, R. Hergenroder, L. B. Koutny and J. M. Ramsey, Anal. Chem., 1994, 66, 1114.
5. A. Y. Fu, C. Spence, A. Scherer, F. H. Arnold and S. R. Quake, Nature Biotechnol., 1999, 17, 1109.
6. J. Krüger, K. Singh, A. O'Neill, C. Jackson, A. Morrison and P. O'Brien, J. Micromech. Microeng., 2002, 12, 486.
7. M. U. Kopp, A. J. de Mello and A. Manz, Science, 1998, 280, 1046.
8. A. Dodae, K. Fluri, E. Verpoorte and N. F. de Rooij, Anal. Chem., 2001, 73, 3400.
9. A. T. Woolley, D. Hadley, P. Landre, A. J. de Mello, R. A. Mathies and M. A. Northrup, Anal. Chem., 1996, 68, 4081.
10. M. A. Burns, B. N. Johnson, S. N. Brahmasandra, K. Handique, J. R. Webster, M. Krishnan, T. S. Sammarco, P. M. Man, D. Jones, D. Heldsinger, C. H. Mastrangelo and D. T. Burke, Science, 1998, 282, 484.
11. T. Thorsen, S. J. Maekl and S. R. Quake, Science, 2002, 298, 580.
12. T. Yamamoto, T. Nojima and T. Fujii, Lab Chip, 2002, 2, 197.
13. J. W. Hong, K. Hosokawa, T. Fujii, M. Seki and I. Endo, Biotechnol. Prog., 2001, 17, 958.
14. K. Hosokawa, T. Fujii and I. Endo, Anal. Chem., 1999, 71, 4781.
15. B.-H, Jo, L. M. Van Lerberghe, K. M. Motsegood and D. J. Beebe, J. Microelectomech. Syst., 2000, 9, 76.
16. M. A. Unger, H.-P. Chou, T. Thorsen, A. Sherer and S. R. Quake, Science, 2000, 288, 113.
17. S. Masuda, M. Washizu and T. Nanba, IEEE Trans. Ind. Applicat., 1989, 25, 732.
18. 8 gases. The oxide layer works as the etching mask during ICP-RIE, and removed by HF solution before the PDMS molding process.
19. Y. Xia and G. M. Whitesides, Angew. Chem., Int. Ed., 1998, 37, 550.
20. D. C. Duffy, J. C. McDonald, O. J. A. Schueller and G. M. Whitesides, Anal. Chem., 1998, 70, 4974.
21. S. Hayamizu, K. Hisashino, Y. Fujii, Y. Sando and K. Yamamoto, Proc. MEMS2002, 2002, 113.
22. S. Takayama, E. Ostuni, P. LeDuc, K. Naruse, D. E. Ingber and G. M. Whitesides, Nature, 2001, 411, 1016.
23. P. J. A. Kenis, R. F. Ismagilov and G. M. Whitesides, Science, 1999, 285, 83.
24. N. L. Jeon, H. Baskaran, S. K. W. Dertinger, G. M. Whitesides, L. Van De Water and M. Toner, Nature Biotechnol., 2002, 20, 826.
25. M. Tokeshi, T. Minagawa, K. Uchiyama, A. Hibara, K. Sato, H. Hisamoto and T. Kitamori, Anal. Chem., 2002, 74, 1565.
26. T. Fujii, K. Hosokawa, S. Shoji, A. Yotsumoto, T. Nojima and I. Endo, Proc. MicroTAS'98, Banff, Canada, 173, 1998.
27. R. H. Liu, M. A. Stremler, K. V. Sharp, M. G. Olsen, J. G. Santiago, R. J. Adrian, H. Aref and D. J. Beebe, J. Microelectomech. Syst., 2000, 9, 190.
28. S. Hong, L. G. Frechette and V. Modi, Proc. MicroTAS'02, Nara, Japan, 94, 2002.
29. N. Lembert and L.-A. Idahl, Biochem. J., 1995, 305, 929.
30. The volume of the solution pushed into the junction area by the micropump during a single on-period is approximately 200 pL when the switching frequency is 100 Hz. It is almost the same as the volume (200 pL) around the junction of the narrow channels. For stable switching operation to make thin skins of the solutions, the volume larger than the junction area should be injected during one on-period of the micropump operation. This is the reason why the thin skins could not appear at 100 Hz or higher frequencies. The detailed mechanism of these phenomena should be further investigated.
31. K. B. Mogensen, N. J. Petersen, J. Hübner and J. P. Kutter, Electrophoresis, 2001, 22, 3930.
32. S. Camou, M. Kitamura, J.-P. Gouy, H. Fujita, Y. Arakawa and T. Fujii, Proc. MicroTAS'02, Nara, Japan, 287, 2002.
33. T. Fujii, Proc. IEEE Underwater Technology 2002, Tokyo, Japan, 336, 2002.
34. T. P. Chapin, H. W. Jannasch and K. S. Johnson, Anal. Chim. Acta, 2002, 463, 265.
35. C. A. Emrich, H. Tian, I. L. Medintz and R. A. Mathies, Anal. Chem., 2002, 74, 5076.
36. Y. Kikutani, T. Horiuchi, K. Uchiyama, H. Hisamoto, M. Tokeshi and T. Kitamori, Lab Chip, 2002, 2, 188.
37. J. S. McCaskill, R. Penchovsky, M. Gohlke, J. Ackermann and T. Rücker, Lecture Notes in Computer Science, vol. 2054, p. 263, Springer-Verlag, Heidelberg, 2001.
38. D. T. Chiu, E. Pezzoli, H. K. Wu, A. D. Strook and G. M. Whitesides, Proc. Nat. Acad. Sci. USA, 2001, 98, 2961.