Advanced computational modelling for drying processes - A review

Applied Energy

Volumn 131, Issue , 2014, Pages 323-344

  Defraeye, Thijs ^a,b,c  

^a UNIVERSITY OF LEUVEN   (Belgium)

^b SWISS FEDERAL LABORATORIES FOR MATERIALS SCIENCE AND TECHNOLOGY   (Switzerland)

^c ETH ZURICH   (Switzerland)

Author keywords

CFD; Dehydration; Energy smart; Food; Multiphysics; Nexus

Indexed keywords

CARBON FOOTPRINT; CHEMICAL OPERATIONS; COMPUTATIONAL FLUID DYNAMICS; COMPUTATIONAL METHODS; CRACK PROPAGATION; DEHYDRATION; ENERGY UTILIZATION; FOOD PRODUCTS; INDUSTRIAL RESEARCH; POROUS MATERIALS; TECHNOLOGY; WASTE HEAT;

COMPUTATIONAL MODELLING; ENERGY-SMART; MULTI-PHYSICS; MULTI-PHYSICS MODELLING; NEXUS; PROPERTY VARIABILITIES; RESOURCE EFFICIENCIES; TECHNOLOGICAL INNOVATION;

DRYING;

ADVANCED TECHNOLOGY; DEHYDRATION; INNOVATION; MODEL VALIDATION; NUMERICAL MODEL; RENEWABLE RESOURCE; SOFTWARE; TECHNOLOGICAL DEVELOPMENT;

EID: 84904124422     PISSN: 03062619     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.apenergy.2014.06.027     Document Type: Review

References (297)

1. Mujumdar AS. Handbook of industrial drying. 3rd ed. Taylor & Francis Group, Boca Raton (USA): CRC Press; 2006.
2. Kudra T. Energy aspects in drying. Dry Technol 2004, 22:917-932.
3. Kemp IC. Fundamentals of energy analysis of dryers. In: Tsotsas E, Mujumdar AS, editors. Mod. Dry. Technol. - Energy Savings, Weinheim: Wiley-VCH Verlag GmbH; 2011, p. 1-46.
4. Kerkhof P.J.A.M., Coumans W.J. Drying: a fascinating unit operation. Chem Eng J 2002, 86:1-2.
5. IEA. International Energy Agency - World Energy Outlook fact sheet (<>); 2011. http://www.worldenergyoutlook.org/resources/factsheets/.
6. Mujumdar A.S., Huang L.-X. Global R&D needs in drying. Dry Technol 2007, 25:647-658.
7. Chou S.K., Chua K.J. New hybrid drying technologies for heat sensitive foodstuffs. Trends Food Sci Technol 2001, 12:359-369.
8. Zhang M., Tang J., Mujumdar A.S., Wang A. Trends in microwave-related drying of fruits and vegetables. Trends Food Sci Technol 2006, 17:524-534.
9. Krishnamurthy K., Khurana H.K., Jun S., Irudayaraj J., Demirci A. Infrared heating in food processing: an overview. Compr Rev Food Sci Food Saf 2008, 7:2-13.
10. Kudra T, Mujumdar AS. Advanced drying technologies. 2nd ed. Taylor & Francis Group, Boca Raton (USA): CRC Press; 2009.
11. Dev S.R.S., Raghavan V.G.S. Advancements in drying techniques for food, fiber, and fuel. Dry Technol 2012, 30:1147-1159.
12. Jangam S.V. An overview of recent developments and some R&D challenges related to drying of foods. Dry Technol 2011, 29:1343-1357.
13. Mujumdar A.S. Research and development in drying: recent trends and future prospects. Dry Technol 2004, 22:1-26.
14. Mujumdar A.S. An overview of innovation in industrial drying: current status and R&D needs. Transp Porous Media 2006, 66:3-18.
15. Kemp IC. Process-systems simulation tools. In: Tsotsas E, Mujumdar AS, editors. Mod. dry. technol. - comput. tools differ. scales, vol. 1, Weinheim, Germany: Wiley-VHC Verlag GmbH; 2007, p. 261-305.
16. Banga J.R., Balsa-Canto E., Alonso A.A. Quality and safety models and optimization as part of computer-integrated manufacturing. Compr Rev Food Sci Food Saf 2008, 7:168-174.
17. Menshutina N.V., Kudra T. Computer aided drying technologies. Dry Technol 2001, 19:1825-1849.
18. Wang H.G., Yang W.Q., Senior P., Raghavan R.S., Duncan S.R. Investigation of batch fluidized-bed drying by mathematical modeling, CFD simulation and ECT measurement. AIChE J 2008, 54:427-444.
19. Datta A.K. Porous media approaches to studying simultaneous heat and mass transfer in food processes. II: Property data and representative results. J Food Eng 2007, 80:96-110.
20. Datta A.K. Porous media approaches to studying simultaneous heat and mass transfer in food processes. I: Problem formulations. J Food Eng 2007, 80:80-95.
21. Stawreberg L., Nilsson L. Potential energy savings made by using a specific control strategy when tumble drying small loads. Appl Energy 2013, 102:484-491.
22. Song H., Starfelt F., Daianova L., Yan J. Influence of drying process on the biomass-based polygeneration system of bioethanol, power and heat. Appl Energy 2012, 90:32-37.
23. Yadav V., Moon C.G. Fabric-drying process in domestic dryers. Appl Energy 2008, 85:143-158.
24. Yadav V., Moon C.G. Modelling and experimentation for the fabric-drying process in domestic dryers. Appl Energy 2008, 85:404-419.
25. Ng A.B., Deng S. A new termination control method for a clothes drying process in a clothes dryer. Appl Energy 2008, 85:818-829.
26. Gong Z.-X., Mujumdar A.S. Software for design and analysis of drying systems. Dry Technol 2008, 26:884-894.
27. Kemp I.C. Drying software: past, present, and future. Dry Technol 2007, 25:1249-1263.
28. Datta A.K. Status of physics-based models in the design of food products, processes, and equipment. Compr Rev Food Sci Food Saf 2008, 7:121-129.
29. Gulati T., Datta A.K. Enabling computer-aided food process engineering: Property estimation equations for transport phenomena-based models. J Food Eng 2013, 116:483-504.
30. Strumillo C. Perspectives on developments in drying. Dry Technol 2006, 24:1059-1068.
31. Mujumdar A.S., Zhonghua W. Thermal drying technologies - cost-effective innovation aided by mathematical modeling approach. Dry Technol 2007, 26:145-153.
32. Chua K.J., Chou S.K. Low-cost drying methods for developing countries. Trends Food Sci Technol 2003, 14:519-528.
33. Garau M.C., Simal S., Femenia A., Rosselló C. Drying of orange skin: drying kinetics modelling and functional properties. J Food Eng 2006, 75:288-295.
34. Oliviero T., Verkerk R., Dekker M. A research approach for quality based design of healthy foods: dried broccoli as a case study. Trends Food Sci Technol 2013, 30:178-184.
35. Palzer S., Dubois C., Gianfrancesco A. Generation of product structures during drying of food products. Dry Technol 2012, 30:97-105.
36. Betoret E., Betoret N., Vidal D., Fito P. Functional foods development: trends and technologies. Trends Food Sci Technol 2011, 22:498-508.
37. Van der Sman R.G.M., van der Goot A.J. The science of food structuring. Soft Matter 2009, 5:501-510.
38. FAO. "Energy-smart" food for people and climate - Issue paper (). Rome, Italy; 2011. http://www.fao.org.
39. Masanet E, Worrell E, Graus W, Galitsky C. Energy efficiency improvement and cost saving opportunities for the fruit and vegetable processing industry - an ENERGY STAR guide for energy and plant managers; 2008.
40. Mujumdar A.S. Some recent developments in drying technologies appropriate for postharvest processing. Int J Postharvest Technol Innov 2006, 1:76-92.
41. Dufour P. Control engineering in drying technology: review and trends. Dry Technol 2006, 24:889-904.
42. Chen X.D., Mujumdar A.S. Drying technologies in food processing 2008, Wiley-Blackwell. 1st ed.
43. Tsotsas E., Mujumdar A.S. Modern drying technology - computational tools at different scales 2007, Vol. 1. Wiley-VHC Verlag GmbH, Weinheim, Germany.
44. Turner I.W., Mujumdar A.S. Mathematical modeling and numerical techniques in drying technology 1996, Marcel Dekker Inc, New York. 1st ed.
45. Dhall A., Datta A.K. Transport in deformable food materials: a poromechanics approach. Chem Eng Sci 2011, 66:6482-6497.
46. Defraeye T., Blocken B., Carmeliet J. Analysis of convective heat and mass transfer coefficients for convective drying of a porous flat plate by conjugate modelling. Int J Heat Mass Transf 2012, 55:112-124.
47. Halder A., Dhall A., Datta A.K. Modeling transport in porous media with phase change: applications to food processing. J Heat Transfer 2011, 133:031010-1-031010-13.
48. Mcminn W.A.M., Magee T.R.A. Principles, methods and applications of the convective drying of foodstuffs. Food Bioprod Process 1999, 77:175-193.
49. Carmeliet J., Descamps F., Houvenaghel G. A multiscale network model for simulating moisture transfer properties of porous media. Transp Porous Media 1999, 35:67-88.
50. Metzger T., Tsotsas E., Prat M. Pore-network models: a powerful tool to study drying at the pore level and understand the influence of structure on drying kinetics. Comput. tools differ. scales 2007, vol. 1. Wiley-VHC Verlag GmbH, Weinheim (Germany). E. Tsotsas, A.S. Mujumdar (Eds.).
51. Prat M. On the influence of pore shape, contact angle and film flows on drying of capillary porous media. Int J Heat Mass Transf 2007, 50:1455-1468.
52. Vorhauer N., Tran Q.T., Metzger T., Tsotsas E., Prat M. Experimental investigation of drying in a model porous medium: influence of thermal gradients. Dry Technol 2013, 31:920-929.
53. Holbrook M.N., Zwieniecki M.A. Vascular transport in plants 2005, Elsevier Academic Press, London. 1st ed.
54. Domec J.-C., Lachenbruch B., Meinzer F.C. Bordered pit structure and function determine spatial patterns of air-seeding thresholds in xylem of Douglas-fir (Pseudotsuga menziesii; Pinaceae) trees. Am J Bot 2006, 93:1588-1600.
55. Bonazzi C., Dumoulin E. Quality changes in food materials as influenced by drying processes. Mod. dry. technol. - prod. qual. formul 2011, Vol. 3. Wiley-VHC Verlag GmbH, Weinheim (Germany).
56. Hwang C.-C., Lin C.-M., Kung H.-F., Huang Y.-L., Hwang D.-F., Su Y.-C., et al. Effect of salt concentrations and drying methods on the quality and formation of histamine in dried milkfish (Chanos chanos). Food Chem 2012, 135:839-844.
57. Fang S., Wang Z., Hu X., Datta A.K. Hot-air drying of whole fruit Chinese jujube (Zizyphus jujuba Miller): physicochemical properties of dried products. Int J Food Sci Technol 2009, 44:1415-1421.
58. Frank X., Perré P. The potential of meshless methods to address physical and mechanical phenomena involved during drying at the pore level. Dry Technol 2010, 28:932-943.
59. Perré P. Multiscale modeling of drying as a powerful extension of the macroscopic approach: application to solid wood and biomass processing. Dry Technol 2010, 28:944-959.
60. Katekawa M.E., Silva M.A. A review of drying models including shrinkage effects. Dry Technol 2006, 24:5-20.
61. Philip J.R., De Vries D.A. Moisture movement in porous materials under temperature gradients. Trans Am Geophys Union 1957, 38:222-232.
62. Luikov A.V. Heat and mass transfer in capillary-porous bodies 1966, Pergamon Press, New York. 1st ed.
63. Luikov A.V. Application of the methods of thermodynamics of irreversible processes to the investigation of heat and mass transfer. J Eng Phys 1965, 9:189-202.
64. Bowen R.M. Incompressible porous media models by use of the theory of mixtures. Int J Eng Sci 1980, 18:1129-1148.
65. Bowen R.M. Compressible porous media models by use of the theory of mixtures. Int J Eng Sci 1982, 20:697-735.
66. Kowalski S.J. Toward a thermodynamics and mechanics of drying processes. Chem Eng Sci 2000, 55:1289-1304.
67. Kowalski S.J. Continuous thermohydromechanical model using the theory of mixtures. Mod. dry. technol. - comput. tools differ. scales 2007, vol. 1. Wiley-VHC Verlag GmbH, Weinheim (Germany).
68. Whitaker S. Coupled transport in multiphase systems: a theory of drying. Adv Heat Transf 1998, 31:1-104.
69. Whitaker S. Simultaneous heat, mass, and momentum transfer in porous media: a theory of drying. Adv Heat Transf 1977, 13:119-203.
70. Perré P., Rémond R., Turner I.W. Comprehensive drying models based on volume averaging□: background, application and perspective. Mod. dry. technol. - vol 1. Comput. tools differ. scales 2007, Wiley-VHC Verlag GmbH, Weinheim (Germany). E. Tsotsas, A.S. Mujumdar (Eds.).
71. Couture F., Bernada P., Roques M.A. Continuous thermomechanical models using volume-averaging theory. Mod. dry. technol. comput. tools differ. scales 2007, vol. 1. Wiley-VHC Verlag GmbH, Weinheim (Germany). E. Tsotsas, A.S. Mujumdar (Eds.).
72. Farid M. The moving boundary problems from melting and freezing to drying and frying of food. Chem Eng Process 2002, 41:1-10.
73. Hashimoto A., Stenström S., Kameoka T. Simulation of convective drying of wet porous materials. Dry Technol 2003, 21:1411-1431.
74. Wang L., Sun D.-W. Recent developments in numerical modelling of heating and cooling processes in the food industry - a review. Trends Food Sci Technol 2003, 14:408-423.
75. Defraeye T., Blocken B., Derome D., Nicolai B., Carmeliet J. Convective heat and mass transfer modelling at air-porous material interfaces: overview of existing methods and relevance. Chem Eng Sci 2012, 74:49-58.
76. Gad-el-Hak M. The fluid mechanics of microdevices - the freeman scholar lecture. J Fluids Eng 1999, 121:5-33.
77. Gad-el-Hak M. Differences between liquid and gas transport at the microscale. Bull Polisch Acad Sci 2005, 53:301-316.
78. Gad-el-Hak M. Gas and liquid transport at the microscale. Heat Transf Eng 2006, 27:13-29.
79. Van Marcke P., Verleye B., Carmeliet J., Roose D., Swennen R. An improved pore network model for the computation of the saturated permeability of porous rock. Transp Porous Media 2010, 85:451-476.
80. Prat M. Recent advances in pore-scale models for drying of porous media. Chem Eng J 2002, 86:153-164.
81. Prat M. Percolation model of drying under isothermal conditions in porous media. Int J Multiph Flow 1993, 19:691-704.
82. Yiotis A.G., Tsimpanogiannis I.N., Stubos A.K., Yortsos Y.C. Pore-network study of the characteristic periods in the drying of porous materials. J Colloid Interface Sci 2006, 297:738-748.
83. Huinink H.P., Pel L., Michels M.A.J., Prat M. Drying processes in the presence of temperature gradients - pore-scale modelling. Eur Phys J E Soft Matter 2002, 9:487-498.
84. Surasani V.K., Metzger T., Tsotsas E. Consideration of heat transfer in pore network modelling of convective drying. Int J Heat Mass Transf 2008, 51:2506-2518.
85. Segura L.A., Toledo P.G. Pore-level modeling of isothermal drying of pore networks. Chem Eng J 2005, 111:237-252.
86. Frank X., Almeida G., Perré P. Multiphase flow in the vascular system of wood: from microscopic exploration to 3-D Lattice Boltzmann experiments. Int J Multiph Flow 2010, 36:599-607.
87. Schulte P.J. Computational fluid dynamics models of conifer bordered pits show how pit structure affects flow. New Phytol 2012, 193:721-729.
88. Haile J.M. Molecular dynamics simulation: elementary methods 1997, Wiley Interscience, New York. 1st ed.
89. Kulasinski K., Keten S., Churakov S.V., Derome D., Carmeliet J. A comparative molecular dynamics study of crystalline, paracrystalline and amorphous states of cellulose. Cellulose 2014, 10.1007/s10570-014-0213-7.
90. Lewicki P.P. Design of hot air drying for better foods. Trends Food Sci Technol 2006, 17:153-163.
91. Voda A., Homan N., Witek M., Duijster A., van Dalen G., van der Sman R.G.M., et al. The impact of freeze-drying on microstructure and rehydration properties of carrot. Food Res Int 2012, 49:687-693.
92. Lewicki P.P., Pawlak G. Effect of drying on microstructure of plant tissue. Dry Technol 2003, 21:657-683.
93. Perré P. A review of modern computational and experimental tools relevant to the field of drying. Dry Technol 2011, 29:1529-1541.
94. Jamaleddine T.J., Ray M.B. Application of computational fluid dynamics for simulation of drying processes: a review. Dry Technol 2010, 28:120-154.
95. Kuriakose R., Anandharamakrishnan C. Computational fluid dynamics (CFD) applications in spray drying of food products. Trends Food Sci Technol 2010, 21:383-398.
96. Langrish TAG, Fletcher DF. Spray drying of food ingredients and applications of CFD in spray drying 2001;40:345-54.
97. Mujumdar A.S., Huang L.-X., Chen X.D. An overview of the recent advances in spray-drying. Dairy Sci Technol 2010, 90:211-224.
98. Fletcher D.F., Guo B., Harvie D.J.E., Langrish T.A.G., Nijdam J.J., Williams J. What is important in the simulation of spray dryer performance and how do current CFD models perform?. Appl Math Model 2006, 30:1281-1292.
99. Xia B., Sun D.-W. Applications of computational fluid dynamics (CFD) in the food industry: a review. Comput Electron Agric 2002, 34:5-24.
100. Norton T., Sun D.-W. Computational fluid dynamics (CFD) - an effective and efficient design and analysis tool for the food industry: a review. Trends Food Sci Technol 2006, 17:600-620.
101. Norton T., Tiwari B., Sun D.-W. Computational fluid dynamics in the design and analysis of thermal processes: a review of recent advances. Crit Rev Food Sci Nutr 2013, 53:251-275.
102. Kurnia J.C., Sasmito A.P., Tong W., Mujumdar A.S. Energy-efficient thermal drying using impinging-jets with time-varying heat input - a computational study. J Food Eng 2013, 114:269-277.
103. Yadav A.S., Bhagoria J.L. Heat transfer and fluid flow analysis of solar air heater: a review of CFD approach. Renew Sustain Energy Rev 2013, 23:60-79.
104. Barresi A.A., Pisano R., Rasetto V., Fissore D., Marchisio D.L. Model-based monitoring and control of industrial freeze-drying processes: effect of batch nonuniformity. Dry Technol 2010, 28:577-590.
105. Smolka J., Nowak A.J., Rybarz D. Improved 3-D temperature uniformity in a laboratory drying oven based on experimentally validated CFD computations. J Food Eng 2010, 97:373-383.
106. Böhner M., Barfuss I., Heindl A., Müller J. Improving the airflow distribution in a multi-belt conveyor dryer for spice plants by modifications based on computational fluid dynamics. Biosyst Eng 2013, 115:339-345.
107. Shokouhmand H., Abdollahi V., Hosseini S., Vahidkhah K. Performance optimization of a brick dryer using porous simulation approach. Dry Technol 2011, 29:360-370.
108. Ducept F., Sionneau M., Vasseur J. Superheated steam dryer: simulations and experiments on product drying. Chem Eng J 2002, 86:75-83.
109. Casey M., Wintergerste T. ERCOFTAC Special Interest Group on "Quality and Trust in Industrial CFD" - Best Practice Guidelines 2000, ERCOFTAC. 1st ed.
110. Fletcher D.F., Langrish T.A.G. Scale-adaptive simulation (SAS) modelling of a pilot-scale spray dryer. Chem Eng Res Des 2009, 87:1371-1378.
111. Harvie D.J.E., Langrish T.A.G., Fletcher D.F. Numerical simulations of gas flow patterns within a tall-form spray dryer. Chem Eng Res Des 2001, 79.
112. Jongsma F.J., Innings F., Olsson M., Carlsson F. Large eddy simulation of unsteady turbulent flow in a semi-industrial size spray dryer. Dairy Sci Technol 2013, 93:373-386.
113. Chilton T.H., Colburn A.P. Mass transfer (absorption) coefficients. Ind Eng Chem 1934, 26:1183-1187.
114. Verboven P., Nicolai B., Scheerlinck N., De Baerdemaeker J. The local surface heat transfer coefficient in thermal food process calculations: a CFD approach. J Food Eng 1997, 33:15-35.
115. Kondjoyan A. A review on surface heat and mass transfer coefficients during air chilling and storage of food products. Int J Refrig 2006, 29:863-875.
116. Kaya A., Aydin O., Dincer I. Numerical modeling of heat and mass transfer during forced convection drying of rectangular moist objects. Int J Heat Mass Transf 2006, 49:3094-3103.
117. Chandra Mohan V.P., Talukdar P. Three dimensional numerical modeling of simultaneous heat and moisture transfer in a moist object subjected to convective drying. Int J Heat Mass Transf 2010, 53:4638-4650.
118. Kondjoyan A., Boisson H.C. Comparison of calculated and experimental heat transfer coefficients at the surface of circular cylinders placed in a turbulent cross-flow of air. J Food Eng 1997, 34:123-143.
119. Defraeye T., Herremans E., Verboven P., Carmeliet J., Nicolai B. Convective heat and mass exchange at surfaces of horticultural products: a microscale CFD modelling approach. Agric For Meteorol 2012, 162-163:71-84.
120. Tremblay C., Cloutier A., Fortin Y. Experimental determination of the convective heat and mass transfer coefficients for wood drying. Wood Sci Technol 2000, 34:253-276.
121. Defraeye T., Verboven P., Derome D., Carmeliet J., Nicolai B. Stomatal transpiration and droplet evaporation on leaf surfaces by a microscale modelling approach. Int J Heat Mass Transf 2013, 65:180-191.
122. Halder A., Datta A.K. Surface heat and mass transfer coefficients for multiphase porous media transport models with rapid evaporation. Food Bioprod Process 2012, 90:475-490.
123. Moraga N.O., Medina E.E. Conjugate forced convection and heat conduction with freezing of water content in a plate shaped food. Int J Heat Mass Transf 2000, 43:53-67.
124. Defraeye T., Blocken B., Carmeliet J. CFD analysis of convective heat transfer at the surfaces of a cube immersed in a turbulent boundary layer. Int J Heat Mass Transf 2010, 53:297-308.
125. Lienhard J.H., Lienhard J.H. A heat transfer textbook 2006, Phlogiston Press, Cambridge Massachusetts. 3rd ed.
126. Defraeye T., Verboven P., Nicolai B. CFD modelling of flow and scalar exchange of spherical food products: turbulence and boundary-layer modelling. J Food Eng 2013, 114:495-504.
127. Launder B.E. On the computation of convective heat transfer in complex turbulent flows. Trans ASME J Heat Transf 1988, 110:1112-1128.
128. Murakami S. Comparison of various turbulence models applied to a bluff body. J Wind Eng Ind Aerodyn 1993, 46-47:21-36.
129. Ljung A.-L., Staffan Lundström T., Daniel Marjavaara B., Tano K. Convective drying of an individual iron ore pellet - analysis with CFD. Int J Heat Mass Transf 2011, 54:3882-3890.
130. Ljung A.-L., Lundström T.S., Marjavaara B.D., Tano K. Influence of air humidity on drying of individual iron ore pellets. Dry Technol 2011, 29:1101-1111.
131. Nijdam J.J., Guo B., Fletcher D.F., Langrish T.A.G. Challenges of simulating droplet coalescence within a spray. Dry Technol 2004, 22:1463-1488.
132. Nijdam J.J., Guo B., Fletcher D.F., Langrish T.A.G. Lagrangian and Eulerian models for simulating turbulent dispersion and coalescence of droplets within a spray. Appl Math Model 2006, 30:1196-1211.
133. Chiesa M., Mathiesen V., Melheim J.A., Halvorsen B. Numerical simulation of particulate flow by the Eulerian-Lagrangian and the Eulerian-Eulerian approach with application to a fluidized bed. Comput Chem Eng 2005, 29:291-304.
134. Sommerfeld M., van Wachen B., Oliemans R. ERCOFTAC best practice guidelines for computational fluid dynamics of dispersed multiphase flows 2008, ERCOFTAC.
135. Zhang Z., Chen Q. Comparison of the Eulerian and Lagrangian methods for predicting particle transport in enclosed spaces. Atmos Environ 2007, 41:5236-5248.
136. Mostafa A.A., Mongia H.C. On the modeling of turbulent evaporating sprays: Eulerian versus Lagrangian approach. Int J Heat Mass Transf 1987, 30:2583-2593.
137. Lakehal D. On the modelling of multiphase turbulent flows for environmental and hydrodynamic applications. Int J Multiph Flow 2002, 28:823-863.
138. Langrish T.A.G. Multi-scale mathematical modelling of spray dryers. J Food Eng 2009, 93:218-228.
139. Mezhericher M., Naumann M., Peglow M., Levy A., Tsotsas E., Borde I. Continuous species transport and population balance models for first drying stage of nanosuspension droplets. Chem Eng J 2012, 210:120-135.
140. Mortier S.T.F.C., De Beer T., Gernaey K.V., Remon J.P., Vervaet C., Nopens I. Mechanistic modelling of fluidized bed drying processes of wet porous granules: a review. Eur J Pharm Biopharm 2011, 79:205-225.
141. Kumar J., Peglow M., Warnecke G., Heinrich S., Tsotsas E., Hounslow M., et al. Numerical methods on population balances. Mod. dry. technol. comput. tools differ. scales 2007, vol. 1. Wiley-VHC Verlag GmbH, Weinheim (Germany). E. Tsotsas, A.S. Mujumdar (Eds.).
142. Chen X.D. The basics of a reaction engineering approach to modeling air-drying of small droplets or thin-layer materials. Dry Technol 2008, 26:627-639.
143. Woo M.W., Daud W.R.W., Mujumdar A.S., Wu Z., Meor Talib M., Tasirin S.M. CFD Evaluation of droplet drying models in a spray dryer fitted with a rotary atomizer. Dry Technol 2008, 26:1180-1198.
144. Putranto A., Dong X., Devahastin S., Xiao Z., Webley P.A. Application of the reaction engineering approach (REA) for modeling intermittent drying under time-varying humidity and temperature. Chem Eng Sci 2011, 66:2149-2156.
145. Woo M.W., Daud W.R.W., Mujumdar A.S., Talib M.Z.M., Hua W.Z., Tasirin S.M. Comparative study of droplet drying models for CFD modelling. Chem Eng Res Des 2008, 86:1038-1048.
146. Mezhericher M., Levy A., Borde I. Three-dimensional spray-drying model based on comprehensive formulation of drying kinetics. Dry Technol 2012, 30:1256-1273.
147. Woo M.W., Wan Daud W.R., Tasirin S.M., Talib M.Z.M. Effect of wall surface properties at different drying kinetics on the deposition problem in spray drying. Dry Technol 2008, 26:15-26.
148. Mezhericher M., Levy A., Borde I. Spray drying modelling based on advanced droplet drying kinetics. Chem Eng Process Process Intensif 2010, 49:1205-1213.
149. Mezhericher M., Levy A., Borde I. Modelling the morphological evolution of nanosuspension droplet in constant-rate drying stage. Chem Eng Sci 2011, 66:884-896.
150. Aversa M., Curcio S., Calabrò V., Iorio G. An analysis of the transport phenomena occurring during food drying process. J Food Eng 2007, 78:922-932.
151. Chen P., Pei D.C.T. A mathematical model of drying processes 1989, 32:297-310.
152. Lemus-Mondaca R.A., Zambra C.E., Vega-Gálvez A., Moraga N.O. Coupled 3D heat and mass transfer model for numerical analysis of drying process in papaya slices. J Food Eng 2013, 116:109-117.
153. Lemus-Mondaca R.A., Vega-Gálvez A., Moraga N.O. Computational simulation and developments applied to food thermal processing. Food Eng Rev 2011, 3:121-135.
154. Erriguible A., Bernada P., Couture F., Roques M.A. Simulation of convective drying of a porous medium with boundary conditions provided by CFD. Chem Eng Res Des 2006, 84:113-123.
155. Dhall A., Squier G., Geremew M., Wood W.A., George J., Datta A.K. Modeling of multiphase transport during drying of honeycomb ceramic substrates. Dry Technol 2012, 30:607-618.
156. Belhamri A., Fohr J.-P. Heat and mass transfer along a wetted porous plate in an air stream. AIChE J 1996, 42:1833-1843.
157. Belessiotis V., Delyannis E. Solar drying. Sol Energy 2011, 85:1665-1691.
158. Islam R.M., Mujumdar A.S. Role of product shrinkage in drying rate predictions using a liquid diffusion model. Int Commun Heat Mass Transf 2003, 30:391-400.
159. Queiroz M.R., Nebra S.A. Theoretical and experimental analysis of the drying kinetics of bananas. J Food Eng 2001, 47:127-132.
160. Mayor L., Sereno A.M. Modelling shrinkage during convective drying of food materials: a review. J Food Eng 2004, 61:373-386.
161. Rahman M.S. Toward prediction of porosity in foods during drying: a brief review. Dry Technol 2001, 19:1-13.
162. Whitaker S. Flow in porous media III: deformable media. Transp Porous Media 1986, 1:127-154.
163. Schrefler B.A. Mechanics and thermodynamics of saturated/unsaturated porous materials and quantitative solutions. Appl Mech Rev 2002, 55:351-388.
164. Aregawi W., Defraeye T., Verboven P., Herremans E., Roeck G., Nicolai B. Modeling of coupled water transport and large deformation during dehydration of apple tissue. Food Bioprocess Technol 2013, 6:1963-1978.
165. Singh P.P., Cushman J.H., Maier D.E. Multiscale fluid transport theory for swelling biopolymers. Chem Eng Sci 2003, 58:2409-2419.
166. Singh P.P., Maier D.E., Cushman J.H., Campanella O.H. Effect of viscoelastic relaxation on moisture transport in foods. Part II: Sorption and drying of soybeans. J Math Biol 2004, 49:20-34.
167. Singh P.P., Maier D.E., Cushman J.H. Effect of viscoelastic relaxation on moisture transport in foods. Part I: Solution of general transport equation. J Math Biol 2004, 49:1-19.
168. Takhar P.S., Maier D.E., Campanella O.H., Chen G. Hybrid mixture theory based moisture transport and stress development in corn kernels during drying: validation and simulation results. J Food Eng 2011, 106:275-282.
169. Takhar P.S. Hybrid mixture theory based moisture transport and stress development in corn kernels during drying: coupled fluid transport and stress equations. J Food Eng 2011, 105:663-670.
170. Zhu H., Dhall A., Mukherjee S., Datta A.K. A model for flow and deformation in unsaturated swelling porous media. Transp Porous Media 2010, 84:335-369.
171. Misra S., Ramesh K.T., Okamura A.M. Modeling of tool-tissue interactions for computer-based surgical simulation: A literature review. Presence Teleoperators Virtual Environ 2008, 17:463-491.
172. Perré P., May B.K. A numerical drying model that accounts for the coupling between transfers and solid mechanics. Case of highly deformable products. Dry Technol 2001, 19:1629-1643.
173. Perré P., Passard J. A physical and mechanical model able to predict the stress field in wood over a wide range of drying conditions. Dry Technol 2004, 22:27-44.
174. Akiyama T., Hayakawa K.-I. Heat and moisture transfer and hygrophysical changes in elastoplastic hollow cylinder-food during drying. Food Eng Phys Prop 2000, 65:315-323.
175. Moonen P., Sluys L.J., Carmeliet J. A continuous - discontinuous approach to simulate physical degradation processes in porous media. Int J Numer Methods Eng 2010, 84:1009-1037.
176. Rakesh V., Datta A.K., Walton J.H., McCarthy K.L., McCarthy M.J. Microwave combination heating: coupled electromagnetics-multiphase porous media modeling and MRI experimentation. AIChE J 2012, 58:1262-1278.
177. Datta A.K., Rakesh V. Principles of microwave combination heating. Compr Rev Food Sci Food Saf 2013, 12:24-39.
178. Marra F., De Bonis M.V., Ruocco G. Combined microwaves and convection heating: a conjugate approach. J Food Eng 2010, 97:31-39.
179. Ranjbaran M., Zare D. CFD modeling of microwave-assisted fluidized bed drying of moist particles using two-fluid model. Dry Technol 2012, 30:362-376.
180. Prachayawarakorn S., Choteboon C., Soponronnarit S. Simultaneous momentum, heat, and mass transfer with color change during paddy storage in silo. Dry Technol 2005, 23:205-223.
181. Van Boekel M.A.J.S. Kinetic modeling of food quality: a critical review. Compr Rev Food Sci Food Saf 2008, 7:144-158.
182. Banga J.R., Balsa-Canto E., Moles C.G., Alonso A.A. Improving food processing using modern optimization methods. Trends Food Sci Technol 2003, 14:131-144.
183. Halder A., Datta A.K., Spanswick R.M. Water transport in cellular tissues during thermal processing. AIChE J 2011, 57:2574-2588.
184. Ho Q.T., Carmeliet J., Datta A.K., Defraeye T., Delele M.A., Herremans E., et al. Multiscale modeling in food engineering. J Food Eng 2013, 114:279-291.
185. Kohout M., Stepanek F. Multi-scale analysis of vacuum contact drying. Dry Technol 2007, 25:1265-1273.
186. Novak V., Koci P., Stepanek F., Marek M. Integrated multiscale methodology for virtual prototyping of porous catalysts. Ind Eng Chem Res 2011, 50:12904-12914.
187. Perré P. Multiscale aspects of heat and mass transfer during drying. Transp Porous Media 2007, 66:59-76.
188. Bruchmüller J., van Wachem B., Gu S. Modeling the thermochemical degradation of biomass inside a fast pyrolysis fluidized bed reactor. AIChE J 2012, 58:3030-3042.
189. Zhang K., You C. Experimental and numerical investigation of lignite particle drying in a fixed bed. Energy Fuels 2011, 25:4014-4023.
190. Perré P., Rémond R., Colin J., Mougel E., Almeida G. Energy consumption in the convective drying of timber analyzed by a multiscale computational model. Dry Technol 2012, 30:1136-1146.
191. Perré P., Rémond R., Aléon D. Energy saving in industrial wood drying addressed by a multiscale computational model: board, stack, and kiln. Dry Technol 2007, 25:75-84.
192. Perré P., Rémond R. A dual-scale computational model of kiln wood drying including single board and stack level simulation. Dry Technol 2006, 24:1069-1074.
193. Li X., Rankin S.E. Multiscale dynamic Monte Carlo/continuum model of drying and nonideal polycondensation in sol-gel silica films. AIChE J 2010, 56:2946-2956.
194. Li X., Rankin S.E. Influence of unlimited 3-membered ring cyclization on a multiscale dynamic Monte Carlo/continuum model of drying and curing in sol-gel silica films. Chem Eng Sci 2011, 66:1015-1026.
195. Wu Z., Xiao J., Huang Y., Qian Y. Integrated multiscale product and process control of polymeric coating curing. Chem Eng J 2010, 161:269-275.
196. Maekawa K., Ishida T., Kishi T. Multi-scale modeling of concrete performance integrated material and structural mechanics. J Adv Concr Technol 2003, 1:91-126.
197. Ishida T., Luan Y., Sagawa T., Nawa T. Modeling of early age behavior of blast furnace slag concrete based on micro-physical properties. Cem Concr Res 2011, 41:1357-1367.
198. Maekawa K., Chijiwa N., Ishida T. Long-term deformational simulation of PC bridges based on the thermo-hygro model of micro-pores in cementitious composites. Cem Concr Res 2011, 41:1310-1319.
199. EW. Principles of Multiscale Modeling. 1st edit. Cambridge: Cambridge University Press; 2011.
200. Nassehi V., Parvazinia M. Finite element modeling of multiscale phenomena 2010, Imperial College Press, London. 1st ed.
201. Langrish T.A.G., Kockel T.K. The assessment of a characteristic drying curve for milk powder for use in computational fluid dynamics modelling. Chem Eng J 2001, 84:69-74.
202. Van der Sman R.G.M., Meinders M.B.J. Moisture diffusivity in food materials. Food Chem 2013, 138:1265-1274.
203. Jin X., Van Der Sman R.G.M., van Boxtel A.J.B. Evaluation of the free volume theory to predict moisture transport and quality changes during broccoli drying. Dry Technol 2011, 29:1963-1971.
204. Carmeliet J., Roels S. Determination of the moisture capacity of porous building materials. J Build Phys 2002, 25:209-237.
205. Carmeliet J., Hens H., Roels S., Adan O., Brocken H., Cerny R., et al. Determination of the liquid water diffusivity from transient moisture transfer experiments. J Build Phys 2004, 27:277-305.
206. Tremblay C., Cloutier A., Fortin Y. Determination of the effective water conductivity of red pine sapwood. Wood Sci Technol 2000, 34:109-124.
207. Defraeye T., Blocken B., Carmeliet J. Influence of uncertainty in heat-moisture transport properties on convective drying of porous materials by numerical modelling. Chem Eng Res Des 2013, 91:36-42.
208. Roels S., Carmeliet J., Hens H., Adan O., Brocken H., Cerny R., et al. Interlaboratory comparison of hygric properties of porous building materials. J Build Phys 2004, 27:307-325.
209. Roels S., Talukdar P., James C., Simonson C.J. Reliability of material data measurements for hygroscopic buffering. Int J Heat Mass Transf 2010, 53:5355-5363.
210. Domínguez-Muñoz F., Anderson B., Cejudo-López J.M., Carrillo-Andrés A. Uncertainty in the thermal conductivity of insulation materials. Energy Build 2010, 42:2159-2168.
211. Nicolai B., De Baerdemaeker J. Finite element perturbation analysis of non-linear heat conduction problems with random field parameters. Int J Numer Methods Heat Fluid Flow 1997, 7:525-544.
212. Nicolai B., Scheerlinck N., Verboven P., De Baerdemaeker J. Stochastic perturbation analysis of thermal food processes with random field parameters. Trans ASAE 2000, 43:131-138.
213. Scheerlinck N., Verboven P., Stigter J., De Baerdemaeker J., Van Impe J., Nicolai B. Stochastic finite element analysis of coupled heat and mass transfer problems with random field parameters. Numer Heat Transf Part B - Fundam 2000, 37:309-330.
214. Cronin K, Kearney S. Monte Carlo modelling of a vegetable tray dryer 1998;35:233-50.
215. Tanaka F., Maeda Y., Uchino T., Hamanaka D., Atungulu G.G. Monte Carlo simulation of the collective behavior of food particles in pneumatic drying operation. LWT - Food Sci Technol 2008, 41:1567-1574.
216. Lacasse D., Turgeon É., Pelletier D. On the judicious use of the k-ε model, wall functions and adaptivity. Int J Therm Sci 2004, 43:925-938.
217. Tsotsas E., Mujumdar A.S. Modern drying technology, experimental techniques 2009, Vol. 2. Wiley-VCH Verlag GmbH, Weinheim.
218. Koptyug I.V. MRI of mass transport in porous media: drying and sorption processes. Prog Nucl Magn Reson Spectrosc 2012, 65:1-65.
219. Hillenbach A., Engelhardt M., Abele H., Gähler R. High flux neutron imaging for high-speed radiography, dynamic tomography and strongly absorbing materials. Nucl Instrum Method Phys Res Sect A Accel Spectrometers, Detect Assoc Equip 2005, 542:116-122.
220. Wu C., Cheng Y., Ding Y., Wei F., Jin Y. A novel X-ray computed tomography method for fast measurement of multiphase flow. Chem Eng Sci 2007, 62:4325-4335.
221. Hampel U., Speck M., Koch D., Menz H.-J., Mayer H.-G., Fietz J., et al. Experimental ultra fast X-ray computed tomography with a linearly scanned electron beam source. Flow Meas Instrum 2005, 16:65-72.
222. Feinberg D.A., Setsompop K. Ultra-fast MRI of the human brain with simultaneous multi-slice imaging. J Magn Reson 2013, 229:90-100.
223. Peglow M., Metzger T., Lee G., Schiffter H., Hampel R. Measurement of average moisture content and drying kinetics for single particles, droplets and dryers. Mod. dry. technol. exp. tech. 2009, vol. 2. Wiley-VCH Verlag GmbH. E. Tsotsas, A.S. Mujumdar (Eds.).
224. Le Page J.F., Mirade P.-S., Daudin J.-D. Development of a device and method for the time-course estimation of low water fluxes and mean surface water activity of food products during ripening and storage. Food Res Int 2010, 43:1180-1186.
225. Vitrac O., Trystram G. A method for time and spatially resolved measurement of convective heat transfer coefficient (h) in complex flows. Chem Eng Sci 2005, 60:1219-1236.
226. Léonard A, Crine M, Stepanek F. Use of X-ray tomography for drying-related applications. In: Tsotsas E, Mujumdar AS, editors. vol. 2, Weinheim: Wiley-VCH Verlag GmbH; 2009, p. 143-86.
227. Defraeye T., Aregawi W., Saneinejad S., Vontobel P., Lehmann E., Carmeliet J., et al. Novel application of neutron radiography to forced convective drying of fruit tissue. Food Bioprocess Technol 2012, 6:3353-3367.
228. Patera A., Derome D., Griffa M., Carmeliet J. Hysteresis in swelling and in sorption of wood tissue. J Struct Biol 2013, 182:226-234.
229. Léonard A., Blacher S., Marchot P., Pirard J.-P., Crine M. Image analysis of X-ray microtomograms of soft materials during convective drying: 3D measurements. J Microsc 2003, 212:197-204.
230. Moreno-Atanasio R., Williams R.A., Jia X. Combining X-ray microtomography with computer simulation for analysis of granular and porous materials. Particuology 2010, 8:81-99.
231. Derome D., Griffa M., Koebel M., Carmeliet J. Hysteretic swelling of wood at cellular scale probed by phase-contrast X-ray tomography. J Struct Biol 2011, 173:180-190.
232. Derome D., Rafsanjani A., Patera A., Guyer R., Carmeliet J. Hygromorphic behaviour of cellular material: hysteretic swelling and shrinkage of wood probed by phase contrast X-ray tomography. Philos Mag 2012, 92:3680-3698.
233. Mannes D., Marone F., Lehmann E., Stampanoni M., Niemz P. Application areas of synchrotron radiation tomographic microscopy for wood research. Wood Sci Technol 2009, 44:67-84.
234. Verboven P., Kerckhofs G., Mebatsion H.K., Ho Q.T., Temst K., Wevers M., et al. Three-dimensional gas exchange pathways in pome fruit characterized by synchrotron X-ray. Plant Physiol 2008, 147:518-527.
235. Verboven P., Pedersen O., Herremans E., Ho Q.T., Nicolai B., Colmer T.D., et al. Root aeration via aerenchymatous phellem: three-dimensional micro-imaging and radial O2 profiles in Melilotus siculus. New Phytol 2012, 193:420-431.
236. Derluyn H., Griffa M., Mannes D., Jerjen I., Dewanckele J., Vontobel P., et al. Characterizing saline uptake and salt distributions in porous limestone with neutron radiography and X-ray micro-tomography. J Build Phys 2013, 36:353-374.
237. Kohout M., Grof Z., Stepanek F. Pore-scale modelling and tomographic visualisation of drying in granular media. J Colloid Interface Sci 2006, 299:342-351.
238. Aregawi W., Defraeye T., Saneinejad S., Vontobel P., Lehmann E., Carmeliet J., et al. Dehydration of apple tissue: intercomparison of neutron tomography with numerical modelling. Int J Heat Mass Transf 2013, 67:173-182.
239. Aghbashlo M., Mobli H., Rafiee S., Madadlou A. A review on exergy analysis of drying processes and systems. Renew Sustain Energy Rev 2013, 22:1-22.
240. Hepbasli A. A key review on exergetic analysis and assessment of renewable energy resources for a sustainable future. Renew Sustain Energy Rev 2008, 12:593-661.
241. Oztop H.F., Bayrak F., Hepbasli A. Energetic and exergetic aspects of solar air heating (solar collector) systems. Renew Sustain Energy Rev 2013, 21:59-83.
242. Gungor A., Erbay Z., Hepbasli A. Exergetic analysis and evaluation of a new application of gas engine heat pumps (GEHPs) for food drying processes. Appl Energy 2011, 88:882-891.
243. Gungor A., Erbay Z., Hepbasli A. Exergoeconomic analyses of a gas engine driven heat pump drier and food drying process. Appl Energy 2011, 88:2677-2684.
244. Gustavsson J, Cederberg C, Sonesson U, van Otterdijk R, Meybeck A. Global food losses and food wastes - extent, causes and prevention (). Rome, Italy; 2011. http://www.fao.org.
245. Jairaj K.S., Singh S.P., Srikant K. A review of solar dryers developed for grape drying. Sol Energy 2009, 83:1698-1712.
246. Bal L.M., Satya S., Naik S.N. Solar dryer with thermal energy storage systems for drying agricultural food products: a review. Renew Sustain Energy Rev 2010, 14:2298-2314.
247. VijayaVenkataRaman S., Iniyan S., Goic R. A review of solar drying technologies. Renew Sustain Energy Rev 2012, 16:2652-2670.
248. Tsotsas E., Mujumdar A.S. Modern drying technology. Energy savings 2011, Vol. 4. Wiley-VCH Verlag GmbH, Weinheim. 1st ed.
249. Aziz M., Oda T., Kashiwagi T. Enhanced high energy efficient steam drying of algae. Appl Energy 2013, 109:163-170.
250. Hong S., Ryu C., Ko H.S., Ohm T.-I., Chae J.-S. Process consideration of fry-drying combined with steam compression for efficient fuel production from sewage sludge. Appl Energy 2013, 103:468-476.
251. Rathore N.S., Panwar N.L. Experimental studies on hemi cylindrical walk-in type solar tunnel dryer for grape drying. Appl Energy 2010, 87:2764-2767.
252. Hoff H. Understanding the Nexus. Background paper for the Bonn 2011 Nexus Conference: The Water, Energy and Food Security Nexus. Stockholm Environment Institute; 2011.
253. Bazilian M., Rogner H., Howells M., Hermann S., Arent D., Gielen D., et al. Considering the energy, water and food nexus: Towards an integrated modelling approach. Energy Policy 2011, 39:7896-7906.
254. Fortin Y., Defo M., Nabhani M., Tremblay C., Gendron G. A simulation tool for the optimization of lumber drying schedules. Dry Technol 2004, 22:963-983.
255. Anderson J.-O., Westerlund L. Improved energy efficiency in sawmill drying system. Appl Energy 2014, 113:891-901.
256. FAO. Energy-Smart Food at FAO: An overview (). Rome, Italy; 2012. http://www.fao.org.
257. Masmoudi W., Prat M. Heat and mass transfer between a porous medium and a parallel external flow. Application to drying of capillary porous materials. Int J Heat Mass Transf 1991, 34:1975-1989.
258. Zeghmati B., Daguenet M., Le Palec G. Study of transient laminar free convection over an inclined wet flat plate. Int J Heat Mass Transf 1991, 34:899-909.
259. Dolinskiy A.A., Dorfman A.S.H., Davydenko B.V. Conjugate heat and mass transfer in continuous processes of convective drying. Int J Heat Mass Transf 1991, 34:2883-2889.
260. Oliveira L.S., Fortes M., Haghighi K. Conjugate analysis of natural convective drying of biological materials. Dry Technol 1994, 12:1167-1190.
261. Oliveira L.S., Haghighi K. Conjugate heat and mass transfer in convective drying of porous media. Numer Heat Transf Part A Appl 1998, 34:105-117.
262. Suresh H.N., Aswatha Narayana P.A., Seetharamu K.N. Conjugate mixed convection heat and mass transfer in brick drying. Heat Mass Transf 2001, 37:205-213.
263. Murugesan K., Suresh H.N., Seetharamu K.N., Aswatha Narayana P.A., Sundararajan T. A theoretical model of brick drying as a conjugate problem. Int J Heat Mass Transf 2001, 44:4075-4086.
264. Erriguible A., Bernada P., Couture F., Roques M.A. Modeling of heat and mass transfer at the boundary between a porous medium and its surroundings. Dry Technol 2005, 23:455-472.
265. Younsi R., Kocaefe D., Poncsak S., Kocaefe Y. Computational modelling of heat and mass transfer during the high-temperature heat treatment of wood. Appl Therm Eng 2007, 27:1424-1431.
266. Curcio S., Aversa M., Calabrò V., Iorio G. Simulation of food drying: FEM analysis and experimental validation. J Food Eng 2008, 87:541-553.
267. Younsi R., Kocaefe D., Poncsak S., Kocaefe Y., Gastonguay L. CFD modeling and experimental validation of heat and mass transfer in wood poles subjected to high temperatures: a conjugate approach. Heat Mass Transf 2008, 44:1497-1509.
268. De Bonis M.V., Ruocco G. A generalized conjugate model for forced convection drying based on an evaporative kinetics. J Food Eng 2008, 89:232-240.
269. Lamnatou C., Papanicolaou E., Belessiotis V., Kyriakis N. Conjugate heat and mass transfer from a drying rectangular cylinder in confined air flow. Numer Heat Transf Part A Appl 2009, 56:379-405.
270. Lamnatou C., Papanicolaou E., Belessiotis V., Kyriakis N. Finite-volume modelling of heat and mass transfer during convective drying of porous bodies - non-conjugate and conjugate formulations involving the aerodynamic effects. Renew Energy 2010, 35:1391-1402.
271. Kays W.M., Crawford M.E. Convective heat and mass transfer 1993, McGraw-Hill, USA. 3rd ed.
272. Léonard A., Blacher S., Marchot P., Pirard J.-P., Crine M. Measurement of shrinkage and cracks associated to convective drying of soft materials by X-ray microtomography. Dry Technol 2004, 22:1695-1708.
273. Léonard A., Blacher S., Marchot P., Pirard J.-P., Crine M. Moisture profiles determination during convective drying using X-ray microtomography. Can J Chem Eng 2005, 83:127-131.
274. Alkan S., Zhang Y., Lam F. Moisture distribution changes and wetwood behavior in subalpine fir wood during drying using high X-ray energy industrial CT scanner. Dry Technol 2007, 25:483-488.
275. Baettig R., Rémond R., Perré P. Measuring moisture content profiles in a board during drying: a polychromatic X-ray system interfaced with a vacuum/pressure laboratory kiln. Wood Sci Technol 2006, 40:261-274.
276. Watanabe K., Saito Y., Avramidis S., Shida S. Non-destructive measurement of moisture distribution in wood during drying using digital X-ray microscopy. Dry Technol 2008, 26:590-595.
277. Potter a.R., Austin J.C., Ormerod R.M., Haycock P.W., Heywood B.R., George S.D. X-ray images of defect formation in porcelain ceramics during drying. NDT E Int 2003, 36:77-83.
278. Shokri N., Sahimi M. Structure of drying fronts in three-dimensional porous media. Phys Rev E 2012, 85:066312.
279. Balasko M., Korosi F., Farkas I. Applying dynamic neutron radiography in in-situ monitoring of the drying processes of apple. Dev Chem Eng Miner Process 2002, 10:247-260.
280. Shokri N., Lehmann E., Vontobel P., Or D. Drying front and water content dynamics during evaporation from sand delineated by neutron radiography. Water Resour Res 2008, 44. n/a-n/a.
281. Nakanishi T.M., Okano T., Karakama I., Ishihara T., Matsubayashi M. Three dimensional imaging of moisture in wood disk by neutron beam during drying process. Holzforschung 1998, 52:673-676.
282. Nguyen T.A., Dresselaers T., Verboven P., D'hallewin G., Culeddu N., Van Hecke P., et al. Finite element modelling and MRI validation of 3D transient water profiles in pears during postharvest storage. J Sci Food Agric 2006, 86:745-756.
283. Mantle M., Reis N., Griffiths R., Gladden L. MRI studies of the evaporation of a single liquid droplet from porous surfaces. Magn Reson Imaging 2003, 21:293-297.
284. Koptyug I.V., Kabanikhin S., Iskakov K., Fenelonov V., Khitrina L.Y., Sagdeev R., et al. A quantitative NMR imaging study of mass transport in porous solids during drying. Chem Eng Sci 2000, 55:1559-1571.
285. Stenstrom S., Bonazzi C., Foucat L. Magnetic resonance imaging for determination of moisture profiles and drying curves. Mod. dry. technol. - vol 2. exp. tech. 2009, vol. 2. Wiley-VCH Verlag GmbH, Weinheim. E. Tsotsas, A.S. Mujumdar (Eds.).
286. Frias J.M., Foucat L., Bimbenet J.J., Bonazzi C. Modeling of moisture profiles in paddy rice during drying mapped with magnetic resonance imaging. Chem Eng J 2002, 86:173-178.
287. Zhao C.-X., Shao H.-B., Chu L.-Y. Aquaporin structure-function relationships: water flow through plant living cells. Colloid Surf B Biointerfaces 2008, 62:163-172.
288. Fanta S.W., Vanderlinden W., Abera M.K., Verboven P., Karki R., Ho Q.T., et al. Water transport properties of artificial cell walls. J Food Eng 2012, 108:393-402.
289. Herremans E., Verboven P., Bongaers E., Estrade P., Verlinden B.E., Wevers M., et al. Characterisation of "Braeburn" browning disorder by means of X-ray micro-CT. Postharvest Biol Technol 2013, 75:114-124.
290. Defraeye T., Lehmann V., Gross D., Holat C., Herremans E., Verboven P., et al. Application of MRI for tissue characterisation of "Braeburn" apple. Postharvest Biol Technol 2013, 75:96-105.
291. Lee J.M., Pawlak J.J., Heitmann J.A. Longitudinal and concurrent dimensional changes of cellulose aggregate fibrils during sorption stages. Mater Charact 2010, 61:507-517.
292. Rosenthal M, Bäucker E. Zur Anatomie des Fichtenholzes; 2012.
293. Derome D., Rafsanjani A., Hering S., Dressler M., Patera A., Lanvermann C., et al. The role of water in the behavior of wood. J Build Phys 2013, 36:398-421.
294. Rafsanjani A., Lanvermann C., Niemz P., Carmeliet J., Derome D. Multiscale analysis of free swelling of Norway spruce. Compos Part A Appl Sci Manuf 2013, 54:70-78.
295. Smit G.J.F., du Plessis J.P. Modelling of airflow through a stack in a timber-drying kiln. Appl Math Model 2007, 31:270-282.
296. Hazra C., Bari S., Kundu D., Chaudhari A., Mishra S., Chatterjee A. Ultrasound-assisted/biosurfactant-templated size-tunable synthesis of nano-calcium sulfate with controllable crystal morphology. Ultrason Sonochem 2014, 21:1117-1131.
297. Da Silva Almeida G., Barbosa da Silva J., Joaquina e Silva C., Swarnakar R., de Araújo Neves G., Barbosa de Lima A.G. Heat and mass transport in an industrial tunnel dryer: modeling and simulation applied to hollow bricks. Appl Therm Eng 2013, 55:78-86.