A review of drying models including shrinkage effects

Drying Technology

Volumn 24, Issue 1, 2006, Pages 5-20

  Katekawa, M E ^a   Silva, M A ^a  

^a UNIVERSITY OF CAMPINAS   (Brazil)

Author keywords

Deformable media; Heat transfer; Mass transfer; Numerical methods

Indexed keywords

HEAT TRANSFER; HEAT TRANSFER COEFFICIENTS; MASS TRANSFER; MATHEMATICAL MODELS; NUMERICAL METHODS; SHRINKAGE;

DRYING MODELS; SHRINKAGE EFFECTS;

DRYING;

DRYING; HEAT TRANSFER; HEAT TRANSFER COEFFICIENTS; MASS TRANSFER; MATHEMATICAL MODELS; NUMERICAL METHODS; SHRINKAGE;

EID: 33644795715     PISSN: 07373937     EISSN: 15322300     Source Type: Journal    
DOI: 10.1080/07373930500538519     Document Type: Review

References (143)

1. Rosselló, C.; Simal, S.; SanJuan, N.; Mulet, A.Nonisotropic mass transfer model for green bean drying. Journal of Agricultural Food Chemistry 1997, 45 (2), 337-342.[CSA]
2. Simal, S.; Rosselló, C.; Berna, A.; Mulet, A.Drying of shrinking cylinder-shaped bodies. Journal of Food Engineering 1998, 37 (4), 423-435.[CSA][CROSSREF]
3. Queiroz, M.R.; Nebra, S.A.Theoretical and experimental analysis of the drying kinetics of bananas. Journal of Food Engineering 2001, 47 (2), 127-132.[CSA][CROSSREF]
4. Islam, M.R.; Mujumdar, A.S.Role of product shrinkage in drying rate predictions using a liquid diffusion model. International Communications in Heat and Mass Transfer 2003, 30 (3), 391-400.[CSA][CROSSREF]
5. Bear, J.Eight lectures on mathematical modelling of transport in porous media. In Modelling and Applications of Transport Phenomena in Porous Media; Bear, J., Buchlin, J.-M., Eds.; Kluwer Academic Press: Dordrecht, The Netherlands, 1991; 1-194.
6. Viollaz, P.E.; Suarez, C.An equation for diffusion in shrinking or swelling bodies. Journal of Polymer Science: Polymer Physics Edition 1984, 22 (5), 875-879.[CSA][CROSSREF]
7. Viollaz, P.An analytical solution for diffusion in a shrinking body. Journal of Polymer Science: Polymer Physics Edition 1985, 23 (1), 143-147.[CSA][CROSSREF]
8. Kowalski, S.J.Thermomechanics of the drying process of fluid-saturated porous media. Drying Technology 1994, 12 (3), 453-482.[CSA]
9. Kowalski, S.J.Drying process involving permanent deformations of dried materials. International Journal of Engineering Science 1996, 34 (13), 1491-1506.[CSA][CROSSREF]
10. Kowalski, S.J. Mathematical modeling of shrinkage during drying. Drying Technology, 1996 14 (2) 307-331.[CSA]
11. Kowalski, S.J.; Strumillo, C.Moisture transport, thermodynamics, and boundary conditions in porous materials in presence of mechanical stresses. Chemical Engineering Science 1997, 52 (7), 1141-1150.[CSA][CROSSREF]
12. Viollaz, P.E.; Rovedo, C.O.A drying model for three-dimensional shrinking bodies. Journal of Food Engineering 2002, 52 (2), 149-153.[CSA][CROSSREF]
13. Mrani, I.; Fras, G.; Benet, J.C.Numerical study of drying stresses in agar gel. Drying Technology 1995, 13 (3), 551-570.[CSA]
14. Mrani, I.; Benet, J.C.; Fras, G.; Zrikem, Z.Two dimensional simulation of dehydration of a highly deformable gel: Moisture content, stress and strain fields. Drying Technology 1997, 15 (9), 2165-2193.[CSA]
15. Bonazzi, C.; Ripoche, A.; Michon, C.Moisture diffusion in gelatin slabs by modeling drying kinetics. Drying Technology 1997, 15 (6-8), 2045-2059.[CSA]
16. Ruiz-Cabrera, M.A.; Foucat, L.; Bonny, J.M.; Renou, J.P.; Daudin, J.D.Assessment of water diffusivity in gelatin gel from moisture profiles. II. Data processing adapted to material shrinkage. Journal of Food Engineering 2005, 68 (2), 221-231.[CSA]
17. Furuta, T.; Hayakawa, K.Heat and moisture transfer with thermodynamically interactive fluxes I. Mathematical model development and numerical solution. Transactions of the ASAE 1992, 35 (5), 1537-1546.[CSA]
18. Furuta, T.; Hayakawa, K.Heat and moisture transfer with thermodynamically interactive fluxes II. Estimation of moisture flux correction factors. Transactions of the ASAE 1992, 35 (5), 1547-1551.[CSA]
19. Furuta, T.; Hayakawa, K.Heat and moisture transfer with thermodynamically interactive fluxes III. Computer simulation. Transactions of the ASAE 1992, 35 (5), 1553-1557.[CSA]
20. Tsukada, T.; Sakai, N.; Hayakawa, K.Computerized model for strain-stress analysis of food undergoing simultaneous heat and mass transfer. Journal of Food Science 1991, 56 (5), 1438-1445.[CSA]
21. Izumi, M.; Hayakawa, K.Heat and moisture transfer and hygrostress crack formation and propagation in cylindrical, elastoplastic food. International Journal of Heat and Mass Transfer 1995, 38 (6), 1033-1041.[CSA][CROSSREF]
22. Akiyama, T.; Liu, H.; Hayakawa, K.Hygrostress multi-crack formation and propagation in cylindrical viscoelastic food undergoing heat and moisture transfer processes. International Journal of Heat and Mass Transfer 1997, 40 (7), 1601-1609.[CSA][CROSSREF]
23. Karlsson, K.; Stenström, S.Static and dynamic modeling of cardboard drying part 1: Theoretical model. Drying Technology 2005, 23 (1-2), 143-163.[CSA][CROSSREF]
24. Karlsson, K.; Stenström, S.Static and dynamic modeling of cardboard drying part 1: Simulations and experimental results. Drying Technology 2005, 23 (1-2), 165-186.[CSA][CROSSREF]
25. Aregba, W.; Jomaa, W.; Puiggali, J.R.Une approche du séchage de matériaux fortement déformables. Revue de Physique Appliqué 1990, 25 (11), 1161-1175.[CSA]
26. Jomaa, W.; Puiggali, J.R.Drying of shrinking materials: Modellings with shrinkage velocity. Drying Technology 1991, 9 (5), 1272-1293.[CSA]
27. Akiyama, T.; Hayakawa, K.Heat and moisture transfer and hygrophysical changes in elastoplastic hollow cylinder-food during drying. Journal of Food Science 2000, 65 (2), 315-323.[CSA]
28. Ponsart, G.; Vasseur, J.; Frias, J.M.; Duquenoy, A.; Méot, J.M.Modelling of stresses due to shrinkage during drying of spaghetti. Journal of Food Engineering 2003, 57 (3), 277-285.[CSA][CROSSREF]
29. Bowser, T.J.; Wilhelm, L.R.Modeling simultaneous shrinkage and heat and mass transfer of a thin, nonporous film during drying. Journal of Food Science 1995, 60 (4), 753-757.[CSA]
30. Itaya, Y.; Kobayashi, T.; Hayakawa, K.Three-dimensional heat and moisture transfer with viscoelastic strain-stress formation in composite food during drying. International Journal of Heat and Mass Transfer 1995, 38 (7), 1173-1185.[CSA][CROSSREF]
31. Hasatani, M.; Itaya, Y.Drying-induced strain and stress: A review. Drying Technology 1996, 14 (5), 1011-1040.[CSA]
32. Achanta, S.; Okos, M.R.; Cushman, J.H.; Kessler, D.P.Moisture transport in shrinking gels during saturated drying. AIChE Journal 1997, 43 (8), 2112-2122.[CSA][CROSSREF]
33. Mercier, F.; Kolenda, F.; Puiggali, J.R.Influence of the mechanical behavior law on the drying of an alumina gel. Chemical Engineering Journal 2002, 86 (1-2), 95-101.[CSA][CROSSREF]
34. Kowalski, S.J.; Rybicki, A.Drying stress formation by inhomogeneous moisture and temperature distribution. Transport in Porous Media 1996, 24 (2), 139-159.[CSA][CROSSREF]
35. Musielak, G.Internal stresses caused by outflow of moisture and phase change inside drying material. Drying Technology 1996, 14 (2), 289-306.[CSA]
36. Kowalski, S.J.; Musielak, G.; Rybicki, A.The response of dried materials to drying conditions. International Journal of Heat and Mass Transfer 1997, 40 (5), 1217-1226.[CSA][CROSSREF]
37. Kowalski, S.J.Toward a thermodynamics and mechanics of drying process. Chemical Engineering Science 2000, 55 (7), 1298-1304.[CSA][CROSSREF]
38. Kowalski, S.J.; Rajewska, K.; Rybicki, A.Destruction of wet materials by drying. Chemical Engineering Science 2000, 55 (23), 5575-5762.[CSA][CROSSREF]
39. Kowalski, S.J.; Rybicki, A.Rate of drying and stresses in the first period of drying. Drying Technology 2000, 18 (3), 583-600.[CSA]
40. Musielak, G.Influence of the drying medium parameters on drying induced stresses. Drying Technology 2000, 18 (3), 561-581.[CSA]
41. Kowalski, S.J.Thermomechanical approach to shrinking and cracking phenomena in drying. Drying Technology 2001, 19 (5), 731-765.[CSA][CROSSREF]
42. Kowalski, S.J.Modeling of fracture phenomena in dried materials. Chemical Engineering Journal 2002, 86 (1-2), 145-151.[CSA][CROSSREF]
43. Kowalski, S.J.; Rybicki, A.Drying induced stresses in a swelling porous wall. Transport in Porous Media 2004, 57 (1), 35-48.[CSA][CROSSREF]
44. Ketelaars, A.A.J.Drying deformable media. Kinetics, shrinkage and stresses. Ph.D. Thesis, Eindhoven University of Technology, Eindhoven; 1992, 106 pp.
45. Hasatani, M.; Itaya, Y.; Muroie, K.; Taniguchi, S.Contraction characteristics of molded ceramics during drying. Drying Technology 1993, 11 (4), 815-830.[CSA]
46. Silva, M.A.A general model for moving boundary problems - Application to drying of porous media. Drying Technology 2000, 18 (3), 601-624.[CSA]
47. Mihoubi, D.; Zagrouba, F.; Vaxelaire, J.; Bellagi, A.; Roques, M.Transfer phenomena during drying of a shrinkable product: Modeling and simulation. Drying Technology 2004, 22 (1-2), 91-109.[CSA][CROSSREF]
48. Banaszak, J.; Kowalski, S.J.Drying induced stresses estimated on the base of elastic and viscoelastic models. Chemical Engineering Journal 2002, 86 (1-2), 139-143.[CSA][CROSSREF]
49. Kowalski, S.J.; Rajewska, K.Drying-induced stresses in elastic and viscoelastic saturated materials. Chemical Engineering Science 2002, 57 (18), 3883-3892.[CSA][CROSSREF]
50. Banaszak, J.; Kowalski, S.J.Theoretical and experimental analysis of stresses and fractures in clay like materials during drying. Chemical Engineering and Processing 2005, 44 (4), 497-503.[CSA][CROSSREF]
51. Hasatani, M.; Itaya, Y.; Hayakawa, K.Fundamental study on shrinkage of formed clay during drying - Viscoelastic strain-stress and heat/moisture transfer. Drying Technology 1992, 10 (4), 1013-1036.[CSA]
52. Shishido, I.; Suzuki, M.; Ohtani, S.On the drying mechanism of shrinkage materials. Drying Technology 1992, 10 (3), 563-589.[CSA]
53. Itaya, Y.; Mabuchi, S.; Hasatani, M.Deformation behavior of ceramic slabs by nonuniform drying. Drying Technology 1995, 13 (3), 801-819.[CSA]
54. Itaya, Y.; Taniguchi, S.; Hasatani, M.A numerical study of transient deformation and stress behavior of a clay slab during drying. Drying Technology 1997, 15 (1), 1-21.[CSA]
55. Itaya, Y.; Mori, S.; Hasatani, M.Effect of intermittent heating on drying-induced strain-stress of molded clay. Drying Technology 1999, 17 (7-8), 1261-1271.[CSA]
56. Nascimento, J.J.S.; Belo, F.A.; Lima, A.G.B.Mathematical modeling to simulate drying of ceramics including shrinkage: A numerical study. In Drying 2002, A; Chao, C.W., Pan, Y.K., Liu, X.D., Qu, Y.X., Eds.; 2002; 395-404.
57. Zhang, D.; Mujumdar, A.S.Deformation and stress analysis of porous capillary bodies during intermittent volumetric thermal drying. Drying Technology 1992, 10 (2), 421-443.[CSA]
58. Majumdar, P.; Gupta, A.; Marchertas, A.Moisture propagation and resulting stress in heated concrete walls. Nuclear Engineering and Design 1995, 156 (1-2), 147-158.[CSA][CROSSREF]
59. Granger, L.; Torrenti, J.M.; Acker, P.Thoughts about drying shrinkage: Scale effects and modelling. Materials and Structures 1997, 30 (3), 96-105.[CSA]
60. Granger, L.; Torrenti, J.M.; Acker, P.Thoughts about drying shrinkage: Experimental results and quantification of structural drying creep. Materials and Structures 1997, 30 (12), 588-598.[CSA]
61. Coussy, O.; Eymard, R.; Lassabatère, T.Constitutive modeling of unsaturated drying deformable media. Journal of Engineering Mechanics 1998, 124 (6), 658-667.[CSA][CROSSREF]
62. Dufour, P.; Blanc, D.; Touré, Y.; Laurent, P.Infrared drying process of an experimental water painting: Model predictive control. Drying Technology 2004, 22 (1-2), 269-284.[CSA][CROSSREF]
63. Roman, G.N.; Urbicain, M.J.; Rotstein, E.Kinetics of the approach to sorptional equilibrium by a foodstuff. AIChE Journal 1983, 29 (5), 800-805.[CSA][CROSSREF]
64. Crapiste, G.H.; Whitaker, S.; Rotstein, E. Drying of cellular material - I. A mass transfer theory. Chemical Engineering Science 1998, 43 (11), 2919-2928 [CSA]
65. Crapiste, G.H.; Whitaker, S.; Rotstein, E.Drying of cellular material - II. Experimental and numerical results. Chemical Engineering Science 1988, 43 (11), 2929-2936 [CSA]
66. Fusco, A.J.; Avanza, J.R.; Aguerre, R.J.; Gabitto, J.F.A diffusional model for drying with volume change. Drying Technology 1991, 9 (2), 397-417.[CSA]
67. Vagenas, G.K.; Marinos-Kouris, D.Drying kinetics of apricots. Drying Technology 1991, 9 (3), 735-752.[CSA]
68. Karim, M.A.; Hawlader, M.N.A.Drying characteristics of banana: Theoretical modelling and experimental validation. Journal of Food Engineering 2005, 70 (1), 35-45.[CSA][CROSSREF]
69. Lima, A.G.B.; Queiroz, M.R.; Nebra, S.A.Simultaneous moisture transport and shrinkage during drying of solids with ellipsoidal configuration. Chemical Engineering Journal 2002, 86 (1-2), 85-93.[CSA][CROSSREF]
70. Mabrouk, S.B.; Belghith, A.Numerical Simulation of the drying of a deformable material: Evaluation of the diffusion coefficient. Drying Technology 1995, 13 (8-9), 1789-1805.[CSA]
71. Bouaziz, N.; Belghith, A.Heat and mass transfer during the convective drying: From the sample behaviour to the drying project. In Drying '98, A; Akritidis, C.B., Marinos-Kowis, D., Saravacos, G.D., Eds.; 1998; 118-125.
72. Mulet, A.; Berna, A.; Rosselló, C.Drying of Carrots I. Drying models. Drying Technology 1989, 7 (3), 537-557.[CSA]
73. Sanga, E.C.M.; Mujumdar, A.S.; Raghavan, G.S.V.Simulation of convection-microwave drying for a shrinking material. Chemical Engineering and Processing 2002, 41 (6), 487-499.[CSA][CROSSREF]
74. Hernández, J.A.; Pavón, G.; García, M.A.Analytical solution of mass transfer equation considering shrinkage for modeling food-drying kinetics. Journal of Food Engineering 2000, 45 (1), 1-10.[CSA][CROSSREF]
75. Irudayaraj, J.; Haghighi, K.Stress analysis of viscoelastic materials during drying: I - Theory and finite element formulation. Drying Technology 1993, 11 (5), 901-927.[CSA]
76. Irudayaraj, J.; Haghighi, K.; Stroshine, R.Stress analysis of viscoelastic materials during drying: II - Application to grain kernels. Drying Technology 1993, 11 (5), 929-959.[CSA]
77. Azzouz, S.; Jomaa, W.; Belghith, A.Drying kinetic equation of single layer of grapes. In Drying '98, B; Akritidis, C.B., Marinos-Kowis, D., Saravacos, G.D., Eds.; 1998; 988-997.
78. Azzouz, S.; Guizani, A.; Jomaa, W.; Belghith, A.Moisture diffusivity and drying kinetic equation of convective drying of grapes. Journal of Food Engineering 2002, 55 (4), 323-330.[CSA][CROSSREF]
79. Vagenas, G.K.; Marinos-Kouris, D.An analysis of mass transfer in air-drying of foods. Drying Technology 1990, 8 (2), 323-342.[CSA]
80. Composada, J.; Pakowski, Z.; Bartczak, Z.; Gou, P.Estimation of moisture content and temperature dependent water diffusivity in raw ham. C.B.Akritidis, D.Marinos-Kowis, and G.D.Saravacos (Eds.) In Drying '98, A, 703-710, 1998.
81. Balaban, M.; Pigott, G.M.Mathematical model of simultaneous heat and mass transfer in food with dimensional changes and variable transport properties. Journal of Food Science 1988, 53 (3), 935-939.[CSA]
82. Frías, J.M. Foucat, L. Bimbenet, J.J. Bonazzi C. Modeling of moisture profiles in paddy rice during drying mapped with magnetic resonance imaging. Chemical Engineering Journal 2002 86 (1-2) 173-178 [CSA].
83. Di Matteo, M.; Cinquanta, L.; Galiero, G.; Crescitelli, S.A mathematical model of mass transfer in spherical geometry: Plum (Prunus domestica) drying. Journal of Food Engineering 2003, 58 (2), 183-192.[CSA][CROSSREF]
84. Suarez, C.; Viollaz, P.E.Shrinkage effect on drying behavior of potato slabs. Journal of Food Engineering 1991, 13 (2), 103-114.[CSA][CROSSREF]
85. Rovedo, C.O.; Suarez, C.; Viollaz, P.E.Drying of foods: Evaluation of a drying model. Journal of Food Engineering 1995, 26 (1), 1-12.[CSA][CROSSREF]
86. Islam, M.R.; Ho, J.C.; Mujumdar, A.S.Simulation of liquid diffusion-controlled drying of shrinking thin slabs subjected to multiple heat sources. Drying Technology 2003, 21 (3), 413-438.[CSA][CROSSREF]
87. Chemkhi, S.; Zagrouba, F.; Bellagi, A.Mathematical model for drying of highly shrinkable media. Drying Technology 2004, 22 (5), 1023-1039.[CSA][CROSSREF]
88. Perré, P.; May, B.K.A numerical drying model that accounts for the coupling between transfers and solid mechanics. Case of highly deformable products. Drying Technology 2001, 19 (8), 1629-1643.[CSA]
89. Perré, P.Le séchage de matériaux déformables: Formulation, characterization physico-mechanique, modélisation et simulation. Transactions of the Tambov State Technical University 2004, 10 (1A), 120-139.[CSA]
90. Yang, H.; Sakai, N.; Watanabe, M.Drying model with non-isotropic shrinkage deformation undergoing simultaneous heat and mass transfer. Drying Technology 2001, 19 (7), 1441-1460.[CSA][CROSSREF]
91. Jia, C.C.; Yang, W.; Siebenmorgen, T.J.; Cnossen, A.G.Development of computer simulation software for single grain kernel drying, tempering, and stress analysis. Transactions of the ASAE 2002, 45 (5), 1485-1492.[CSA]
92. Misra, R.M.; Young, J.H.Numerical solution of simultaneous moisture diffusion and shrinkage during soybean drying. Transactions of the ASAE 1980, 23 (5), 1277-1282.[CSA]
93. Haghighi, K.Finite element simulation of the thermo-hydro stresses in a viscoelastic sphere during drying. Drying Technology 1990, 8 (3), 451-464.[CSA]
94. Gabitto, J.F.; Aguerre, R.J.Numerical solution of the drying process with volume change. Latin American Journal Heat Mass Transfer 1985, 9, 231-240.[CSA]
95. Agaras, H.; Aguerre, R.J.; Gabitto, J.F.Solution of moving boundary problems by coordinate transformations. International Communications in Heat and Mass Transfer 1988, 15 (1), 41-50.[CSA][CROSSREF]
96. Kang, W.; Lee, N.H.Mathematical modeling to predict drying deformation and stress due to the differential shrinkage within a tree disk. Wood Science and Technology 2002, 26, 463-476.[CSA][CROSSREF]
97. Kowalski, S.J.; Molinski, W.; Musielak, G.The identifications of fracture in dried wood based on theoretical modelling and acoustic emission. Wood Science and Technology 2004, 38 (1), 35-52.[CSA][CROSSREF]
98. Perré, P.; Passard, J.A control-volume procedure compared with the finite-element method for calculating stress and strain during wood drying. Drying Technology 1995, 13 (3), 635-660.[CSA]
99. Perré, P.; Passard, J.A physical and mechanical model able to predict the stress field in wood over a wide range of drying conditions. Drying Technology 2004, 22 (1-2), 27-44.[CSA]
100. Bird, R.B.; Stewart, W.S.; Lightfoot, E.N. Transport Phenomena, 2nd Ed; John Wiley & Sons, Inc.: New York, 2002; 582-592.
101. Slattery, J.C. Advanced Transport Phenomena; Cambridge University Press: Cambridge, U.K., 1999.
102. Benet, J.C.; Jouanna, P.Phenomenological relation of phase change of water in porous medium: Experimental verification and measurement of the phenomenological coefficient. International Journal of Heat and Mass Transfer 1982, 25 (11), 1747-1754.[CSA][CROSSREF]
103. Crapiste, G.H.; Whitaker, S.; Rotstein, E.A general closing scheme for the method of volume averaging. Chemical Engineering Science 1986, 41 (2), 227-235.[CSA][CROSSREF]
104. Puiggali, J.R.; Quintard, M.Properties and simplifying assumptions for classical drying models. In Advances in Drying, Vol. 5; Mujumdar, A.S., Ed.; Hemisphere Publishing Corporation: Washington, DC, 1992; 109-143.
105. van der Zanden, A.J.J.; Schoenmakers, A.M.E.; Kerkhof, P.J.A.M.Isothermal vapour and liquid transport inside clay during drying. Drying Technology 1996, 14 (3-4), 647-676.[CSA]
106. van der Zanden, A.J.J.; Coumans, W.J.; Kerkhof, P.J.A.M.; Schoenmakers, A.M.E.Isothermal moisture transport partially saturated drying media. Drying Technology 1996, 14 (7-8), 1525-1542.[CSA]
107. Fortes, M.; Okos, M.R.Drying theories: Their bases and limitations as applied to foods and grains. In Advances in Drying, Vol. 1; Mujumdar, A.S., Ed.; Hemisphere Publishing Corporation: Washington, DC, 1980; 119-154.
108. Bruin, S.; Luyben, K.C.A.M.Drying of food materials: A review of recent developments. In Advances in Drying, Vol. 1; Mujumdar, A.S., Ed.; Hemisphere Publishing Corporation: Washington, DC, 1980; 155-215.
109. Waananen, K.M.; Litchfield, J.B.; Okos, M.R.Classification of drying models for porous solids. Drying Technology 1993, 11 (1), 1-40.[CSA]
110. Keey, R.B. Drying Principles and Practice, 2nd Ed.; Oxford: Pergamon, 1975.
111. Silva, M.A.; Kerkhof, P.J.A.M.; Coumans, W.J.Estimation of effective diffusivity in drying of heterogeneous media. Industrial Engineering Chemical Research 2000, 39 (5), 1443-1452.[CSA][CROSSREF]
112. Silva, M.A.; Kerkhof, P.J.A.M.; Coumans, W.J.Estimation of effective diffusivity in drying of heterogeneous media (additions and corrections). Industrial Engineering Chemical Research 2000, 39 (8), 3122.[CSA][CROSSREF]
113. Whitaker, S.Flow in porous media I: A theoretical derivation of Darcy's law. Transport in Porous Media 1986, 1 (1), 3-25.[CSA][CROSSREF]
114. Achanta, S.; Cushman, J.H.Non-equilibrium swelling and capillary pressure relations for colloidal systems. Journal of Colloid and Interface Science 1994, 168 (1), 266-268.[CSA]
115. Achanta, S.; Cushman, J.H.; Okos, M.R.On multicomponent, multiphase thermomechanics with interfaces. International Journal of Engineering Science 1994, 32 (11), 1717-1738.[CSA]
116. Preziosi, L.; Farina, A.On Darcy's law for growing porous media. International Journal of Non-linear Mechanics 2002, 37 (3), 485-491.[CSA][CROSSREF]
117. Luikov, A.V.Systems of differential equations of heat and mass transfer in capillary-porous bodies (review). International Journal of Heat and Mass Transfer 1975, 18 (1), 1-14.[CSA][CROSSREF]
118. de Groot, S.R.; Mazur, P. Non-equilibrium Thermodynamics; Dover Publications, Inc.: Nova York, 1984 (reprint), 1-82.
119. Luikov, A.V.Application of irreversible thermodynamics methods to investigation of heat and mass transfer. International Journal of Heat and Mass Transfer 1966, 9 (2), 139-152.[CSA][CROSSREF]
120. Onsager, L.Reciprocal relations in irreversible process I. Physical Review 1931, 37, 405-426.[CSA][CROSSREF]
121. Onsager, L.Reciprocal relations in irreversible process II. Physical Review 1931, 38, 2265-2279.[CSA][CROSSREF]
122. Whitaker, S.The role of irreversible thermodynamics and the Onsager relations in the analysis of drying phenomena. In Drying '88, KL; Roques, M.A., Mujumdar, A.S., Eds.; 1988; 25-38.
123. Rose, W.Myths about later-day extensions of Darcy's law. Journal of Petroleum Science and Engineering 2000, 26 (1-4), 187-198.[CSA][CROSSREF]
124. Biot, M.A.Mechanics of deformation and acoustic propagation in porous media. Journal of Applied Physics 1962, 33 (4), 1482-1498.[CSA][CROSSREF]
125. Sarmento, A.L.S.C.; Couture, F.; Laurent, S.; Roques, M.A.Modeling of heat and mass transport in two-phase media by considering liquid pressure. Drying Technology 2004, 22 (1-2), 81-90.[CSA][CROSSREF]
126. Kowalski, S.J. Thermodynamics of Drying Process; Springer-Verlag: Heidelberg, 2003.
127. Novak, L.T.; Coulman, G.A.Mathematical models for the drying of rigid porous materials. Canadian Journal of Chemical Engineering 1975, 53 (2), 60-67.[CSA]
128. Philip, J.R.; de Vries, D.A.Moisture movement in porous materials under temperature gradients. Transactions of the American Geophysical Union 1957, 38 (2), 222-232.[CSA]
129. Moyne, C.Perré, P.Processes related to drying: Part I, theoretical model. Drying Technology 1991 9(5) 1135-1152 [CSA]
130. Chua, K.J.; Chou, K.; Hawlader, M.N.A.; Mujumdar, A.S.; Ho, J.C.Modelling the moisture and temperature distribution within an agricultural product undergoing time-varying drying schemes. Biosystems Engineering 2002, 81 (1), 99-111.[CSA][CROSSREF]
131. Mayor, L.; Sereno, A.M.Modelling shrinkage during convective drying of food materials: A review. Journal of Food Engineering 2004, 61 (3), 373-386.[CSA][CROSSREF]
132. Rahman, M.S.Toward prediction of porosity in foods during drying: A brief review. Drying Technology 2001, 19 (1), 1-13.[CSA][CROSSREF]
133. Rahman, M.S.A theoretical model to predict the formation o pores in foods during drying. International Journal of Food Properties 2003, 6 (1), 61-72.[CSA][CROSSREF]
134. Coussy, O. Mechanics of Porous Continua; John Wiley & Sons: Chichester, 1995.
135. Biot, M.A. General theory of three-dimensional consolidation. Journal of Applied Physics 1941 12(2) 155-164.[CSA][CROSSREF]
136. Biot, M.A.Consolidation settlement under a rectangular load distribution. Journal of Applied Physics 1941, 12 (5), 426-430.[CSA][CROSSREF]
137. Biot, M.A.Theory of elasticity and consolidation for a porous anisotropic solid. Journal of Applied Physics 1955, 26 (2), 182-185.[CSA][CROSSREF]
138. Biot, M.A.Theory of deformation of a porous viscoelastic anisotropic solid. Journal of Applied Physics 1956, 27 (5), 459-467.[CSA][CROSSREF]
139. Crank, J. Free and Moving Boundary Problems; Clarendon Press: Oxford, 1984; 101-282.
140. Patankar, S.V. Numerical Heat Transfer and Fluid Flow; Hemisphere Publishing Corporation: Washington, DC, 1980.
141. Turner, I.; Perré, P.A synopsis of the strategies and efficient resolution techniques used for modeling and numerically simulating the drying process. In Mathematical Modelling and Numerical Techniques in Drying Technology; Turner, I., Mujumdar, A.S., Eds.; Marcel Dekker, Inc.: New York, 1997; 1-82.
142. Perré, P.; Turner, I.Transpore: A generic heat and mass transfer computational model for understanding and visualizing the drying of porous media. Drying Technology 1999, 17 (7-8), 1273-1289.[CSA]
143. Perré, P.; Turner, I.A 3D version of transpore: A comprehensive heat and mass transfer computational model for simulating the drying of porous media. International Journal of Heat and Mass Transfer 1999, 42 (24), 4501-4521.[CSA][CROSSREF]