Modeling of Coupled Water Transport and Large Deformation During Dehydration of Apple Tissue

Food and Bioprocess Technology

Volumn 6, Issue 8, 2013, Pages 1963-1978

  Aregawi, W A ^a   Defraeye, T ^a   Verboven, P ^a   Herremans, E ^a   De Roeck, G ^a   Nicolai, B M ^a  

^a UNIVERSITY OF LEUVEN   (Belgium)

Author keywords

Apple; Cellular tissue; Drying; Micro CT; Nonlinear viscoelastic models; Water transport

Indexed keywords

APPLE; CELLULAR TISSUE; MICRO CT; NONLINEAR VISCOELASTIC MODEL; WATER TRANSPORT;

COMPUTERIZED TOMOGRAPHY; DEFORMATION; DEHYDRATION; DRYING; FRUITS; MODELS; VISCOELASTICITY;

TISSUE;

MALUS X DOMESTICA;

EID: 84880957393     PISSN: 19355130     EISSN: 19355149     Source Type: Journal    
DOI: 10.1007/s11947-012-0862-1     Document Type: Article

References (63)

1. Akiyama, T., & Hayakawa, K. (2000). Heat and moisture transfer and hygrophysical changes in elastoplastic hollow cylinder-food during drying. Journal of Food Engineering, 65, 315-323.
2. Ali, A., Hosseini, M., & Sahari, B. B. (2010). A review of constitutive models for rubber- like materials. American Journal of Engineering and Applied Sciences, 3, 232-239.
3. Amarante, C., Banks, N. H., & Ganesh, S. (2001). Relationship between character of skin cover of coated pears and permeance to water vapour and gases. Postharvest Biology and Technology, 21(3), 291-301.
4. Anand, L., & Chester, S. A. (2010). A coupled theory of fluid permeation and large deformations for elastomeric materials. Journal of the Mechanics and Physics of Solids, 58, 1879-1906.
5. ANSYS. (2009). Hyperelasticity, finite strain elasticity. User's manual, version 12, Canonsburg, 105-113.
6. ASHRAE. (1993). Fundamentals (handbook) (pp. 6. 1-6. 9). Atlanta: American Society of Heating, Refrigerating and Air-Conditioning Engineering, Inc.
7. Assouline, S., & Tartakovsky, D. M. (2001). Unsaturated hydraulic conductivity function based on a soil fragmentation process. Water Resources Research, 37, 1309-1312.
8. Bialobrzewski, I. (2006). Simultaneous heat and mass transfer in shrinkable apple slab during drying. Drying Technology, 24, 551-559.
9. Bird, R. B., Stewart, W. E., & Lightfoot, E. N. (2002). Transport phenomena (pp. 423-441). New York: Wiley.
10. Bonet, J., & Wood, R. D. (1997). Nonlinear continuum mechanics for finite element analysis (pp. 27-37). Cambridge: Cambridge University Press.
11. COMSOL Multiphysics. (2008). Structural mechanics module, continuum application modes. User's manual, version 3. 5a. Stockholm, Sweden, 167-186.
12. De Smedt, V., Barreiro, P., Verlinden, B., Veraverbeke, E., De Baerdemaeker, J., & Nicolaï, B. (2002). A mathematical model for the development of mealiness in apples. Postharvest Biology and Technology, 25(3), 273-291.
13. Dintwa, E., Zeebroeck, M. V., Ramon, H., & Tijskens, E. (2008). Finite element analysis of the dynamic collision of apple fruit. Postharvest Biology and Technology, 49, 260-276.
14. Duda, F. P., Souza, A. C., & Fried, E. (2010). A theory for species migration in finitely strained solid with application to polymer network swelling. Journal of the Mechanics and Physics of Solids, 58, 515-529.
15. Garikipati, K., & Raoy, V. S. (2001). Recent advances in models for thermal oxidation of silicon. Journal of Computational Physics, 147, 138-170.
16. Gekas, V., & Sjoholm, I. (1995). Apple shrinkage upon drying. Journal of Food Engineering, 25, 123-130.
17. Holzapfel, G. A. (2000). Nonlinear solid mechanics. A continuum approach for engineering (pp. 205-277). Chichester: Wiley.
18. Hubbell, J. H., & Seltzer, S. M. (1995). Tables of X-ray mass attenuation coefficients and mass energy-absorption coefficients 1 keV to 20 MeV for elements Z = 1 to 92 and 48 additional substances of dosimetric interest. National Institute of Standards and Technology, 33, 1269-1290.
19. Inazu, T., Iwasaki, K., & Furuta, T. (2005). Stress and crack prediction during drying of Japanese noodle. International Journal of Food Science and Technology, 40, 621-630.
20. Incropera, F. P., & DE Witt, D. P. (1990). Fundamentals of heat and mass transfer (3rd ed., pp. 348-372). New York: Wiley.
21. Irudayaraj, J., Haghighi, K., & Stroshine, R. L. (1992). Finite-element analysis of drying with application to cereal grains. Journal of Agricultural Engineering Research, 53(3), 209-229.
22. Itaya, Y., Kobayashis, T., & Hayakawa, K. (1995). Three-dimensional heat and moisture transfer with viscoelastic strain-stress formation in composite food during drying. International Journal of Heat and Mass Transfer, 38, 1173-1185.
23. Izum, M., & Hayakawa, K. (1995). Heat and moisture transfer and hygrostress crack formation and propagation in cylinderical, elastoplastic food. International Journal of Heat and Mass Transfer, 38, 1033-1041.
24. Janjai, S., Lambert, N., Intawee, P., Mahayothee, B., Haewsungcharern, M., Bala, B. K., Nagle, M., Leis, H., & Muller, J. (2008a). Finite element simulation of drying of longan fruit. Drying Technology, 26, 666-674.
25. Janjai, S., Lambert, N., Intawee, P., Mahayothee, B., Haewsungcharern, M., Bala, B. K., & Müller, J. (2008b). Finite element simulation of drying of mango. Biosystems Engineering, 299, 523-531.
26. Kim, G. W., Kim, M. S., Sagara, Y., Bae, Y. H., Lee, I. B., Do, G. S., Lee, S. H., & Kang, S. W. (2008). Determination of the viscoelastic properties of apple flesh under quasi-static compression based on finite element optimization. Journal of Food Science Technology, 14, 221-231.
27. Kowalski, S. J. (2005). Toward a thermodynamics and mechanics of drying processes. Journal of Chemical Engineering Science, 55, 1289-1304.
28. Kowalski, S. J., & Rajewska, K. (2002). Drying-induced stresses in elastic and viscoelastic saturated materials. Chemical Engineering Science, 57, 3883-3892.
29. Lima, A. G. B., Queiroz, M. R., & Nebra, S. A. (2002). Simultaneous moisture transport and shrinkage during drying of solids with ellipsoidal configuration. Chemical Engineering Journal, 86, 85-93.
30. Lubarda, V. A., & Hoger, A. (2002). On the mechanics of solids with a growing mass. International Journal of Solids and Structures, 39, 4627-4664.
31. Marcotte, M., Toupin, C. J., & Le Maguer, M. (1991). Mass transfer in cellular tissues. Part I: the mathematical model. Journal of Food Engineering, 13(3), 199-220.
32. Martins, P. A. L., Jorge, R. M., & Ferreira, A. J. (2006). A comparative study of several material models for prediction of hyperelastic properties: application to silicone-rubber and soft tissues. Strain, 42, 135-147.
33. Mayor, L., & Sereno, A. M. (2004). Modeling shrinkage during convective drying of food materials: a review. Journal of Food Engineering, 25, 373-386.
34. Mendoza, F., Verboven, P., Mebatsion, H., Kerckhofs, G., Wevers, M., & Nicolaï, B. (2007). Three-dimensional pore space quantification of apple tissue using X-ray computed microtomography. Planta, 226(3), 559-570.
35. Mohsenin, N. N. (1977). Characterization and failure in solid foods with particular reference to fruits and vegetables. Journal of Texture Studies, 8, 169-193.
36. Mohsenin, N. N. (1986). Physical properties of plant and animal materials (2nd ed., pp. 128-220). New York: Gordon & Breach Science.
37. Moreira, R., Figueiredo, A., & Sereno, A. (2000). Shrinkage of apple disc during drying by warm air convection and freeze drying. Drying Technology, 18, 279-294.
38. Nguyen, T., Verboven, P., Daudin, J., & Nicolaï, B. (2004). Measurement and modelling of water sorption isotherms of 'Conference' pear flesh tissue in the high humidity range. Postharvest Biology and Technology, 33(3), 229-241.
39. Nguyen, T. A., Dresselaers, T., Verboven, P., D'hallewin, G., Culeddu, N., van Hecke, P., & Nicolaï, B. M. (2006). Finite element modelling and MRI validation of 3D transient water profiles in pears during postharvest storage. Journal of the Science of Food and Agriculture, 86(5), 745-756.
40. Nguyen, T. A., Verboven, P., Scheerlinck, N., Vandewalle, S., & Nicolai, B. M. (2006). Estimation of effective diffusivity of pear tissue and cuticle by means of a numerical water diffusion model. Journal of Food Engineering, 72(1), 63-72.
41. Nguyen, T., Verboven, P., Schenk, A., & Nicolaï, B. (2007). Prediction of water loss from pears (Pyrus communis cv. Conference) during controlled atmosphere storage as affected by relative humidity. Journal of Food Engineering, 83(2), 149-155.
42. Niamnuy, C., Devahastin, S., Soponronnarit, S., & VijayaRaghavan, G. S. (2008). Modeling coupled transport phenomena and mechanical deformation of shrimp during drying in a jet spouted bed dryer. Journal of Chemical Engineering, 63, 5503-5512.
43. Nicoleti, J. F., Silveira-Jr, V., Telis-Romero, J., & Telis, V. R. N. (2005). Viscoelastic behavior of persimmons dried at constant air temperature. LWT- Food Science and Technology, 38(2), 143-150.
44. Nobel, P. S. (1991). Physiochemical and environmental plant physiology (pp. 37-80). New York: Academic.
45. Pena, E., Pena, J. A., Martinez, M. A., & Doblare, M. (2008). On modelling nonlinear viscoelastic effects in ligaments. Journal of Biomechanics, 41, 2659-2666.
46. Piotr, P. L., & Ewa, J. (2004). Effect of hot air temperature on mechanical properties of dried apples. Journal of Food Engineering, 64, 307-314.
47. Rakesh, V., & Datta, A. K. (2011). Microwave puffing: determination of optimal conditions using a coupled multiphase porous media-large deformation model. Journal of Food Engineering, 107(2), 152-163.
48. Rambert, G., Jugla, G., Grandidier, J. C., & Cangemi, L. (2006). A modelling of the direct couplings between heat transfer, mass transport, chemical reactions and mechanical behaviour. Numerical implementation to explosive decompression. Composites Part A, 3, 571-584.
49. Ratti, C., & Crapiste, G. H. (2009). Modeling of batch dryers for shrinkable biological materials. Food Bioprocess Technology, 2, 248-256.
50. Salunkhe, D. K., & Kadam, S. S. (1995). Handbook of fruit science and technology. Production, composition, storage and processing (pp. 91-122). New York: Marcel Dekker.
51. Srinivasa, A. R., & Baek, S. (2004). Diffusion of a fluid through an elastic solid undergoing large deformation. International Journal of Non-Linear Mechanics, 39, 201-218.
52. Taiz, L., & Zeiger, E. (2002). Plant physiology (3rd ed., pp. 33-45). Sunderland: Sinauer.
53. Toupin, C. J., Marcotte, M., & Le Maguer, M. (1989). Osmoticallyinduced mass transfer in plant storage tissues: a mathematical model. Part I. Journal of Food Engineering, 10(1), 13-38.
54. van der Sman, R. G. M. (2007). Moisture transport during cooking of meat: an analysis based on Flory-Rehner theory. Meat Science, 76, 730-738.
55. Veraverbeke, E. A., Verboven, P., van Oostveldt, P., & Nicolai, B. M. (2003a). Prediction of moisture loss across the cuticle of apple (Malus sylvestris subsp mitis (Wallr.)) during storage: part 2. Model simulations and practical applications. Postharvest Biology and Technology, 30(1), 89-97.
56. Veraverbeke, E. A., Verboven, P., van Oostveldt, P., & Nicolai, B. M. (2003b). Prediction of moisture loss across the cuticle of apple (Malus sylvestris subsp mitis (Wallr.)) during storage Part 1. Model development and determination of diffusion coefficients. Postharvest Biology and Technology, 30(1), 75-88.
57. Veraverbeke, E. A., Verboven, P., Scheerlinck, N., Hoang, M. L., & Nicolai, B. M. (2003). Determination of the diffusion coefficient of tissue, cuticle, cutin and wax of apple. Journal of Food Engineering, 58(3), 285-294.
58. Verboven, P., Kerckhofs, G., Mebatsion, H. K., Ho, Q. T., Temst, K., Wevers, M., Cloetens, P., & Nicolaï, B. M. (2008). Three-dimensional gas exchange pathways in pome fruit chracterized by synchroton X-ray computed tomography. Plant Physiology, 142, 518-527.
59. Wang, J. (2003). Anisotropic relaxation properties of pear. Biosystems Engineering, 85(1), 59-65.
60. Wills, R., McGlasson, B., Graham, D., & Joyce, D. (1998). Postharvest: an introduction to the physiology and handling of fruit, vegetables and ornamentals (4th ed., pp. 80-102). Willingford: CAB International.
61. Yang, H., Sakai, N., & Watanabe, M. (2001). Drying model with non-isotropic shrinkage deformation undergoing simultaneous heat and mass transfer. Drying Technology, 19, 1441-1460.
62. Yao, Z., & Le Maguer, M. (1996). Mathematical modelling and simulation of mass transfer in osmotic dehydration processes. Part I: conceptual and mathematical models. Journal of Food Engineering, 29(3-4), 349-360.
63. Zhang, J., Datta, A. K., & Mukherjee, S. (2005). Transport processes and large deformation during baking of bread. American Institute of Chemical Engineers Journal, 51(9), 2569-2580.