An overview of the recent advances in spray-drying

Dairy Science and Technology

Volumn 90, Issue 2-3, 2010, Pages 211-224

  Mujumdar, Arun S ^a   Huang, Li Xin ^b   Dong Chen, Xiao ^c  

^a NATIONAL UNIVERSITY OF SINGAPORE   (Singapore)

^b Institute of Chemical Industry of Forest Products   (China)

^c MONASH UNIVERSITY   (Australia)

Author keywords

CFD; Computational fluid dynamics; Modeling; Spray drying

Indexed keywords

EID: 77952695068     PISSN: 19585586     EISSN: 19585594     Source Type: Journal    
DOI: 10.1051/dst/2010015     Document Type: Conference Paper

References (67)

1. Bhandari B., Howes T., Relating the stickiness property of foods undergoing drying and dried products to their surface energetic, Drying Technol. 23 (2005) 791-797.
2. Blei S., Sommerfeld M., Computation of agglomeration for non-uniform dispersed phase properties - an extended stochastic collision model, in: Proceedings of the 5th International Conference on Multiphase Flow, 30 May-4 June 2004, ICMF'04, Yokohama, Japan.
3. Caric M., Concentrated and Dried Dairy Products, VCH Publishers, New York, USA, 1994.
4. Chen X.D., Whole milk powder agglomeration - principle and practice, in: Chen X.D. (Ed.), Milk Powders for the Future, Dunmore Press, Palmerston North, New Zealand, 1992.
5. Chen X.D., Lake R., Jebson S., Study of milk powder deposition on a large industrial dryer, Trans. IChemE: Bio-Process. Food Process. 71 (1993) 180-186.
6. Crowe C.T., Sharma M.P., Stock D.E., The particle-source-in-cell (PSI-Cell) model for gas-droplet flows, J. Fluid Eng. 9 (1977) 325-332.
7. Ducept F., Sionneau M., Vasseur J., Superheated steam dryer: simulations and experiments on product drying, Chem. Eng. J. 86 (2002) 75-83.
8. Filkova I., Huang L.X., Mujumdar A.S., Industrial spray drying systems, in: Mujumdar A.S. (Ed.), Handbook of Industrial Drying, Taylor & Francis, New York, USA, 2007, pp. 215-257.
9. Frydman A.,Vasseur J., Ducept F., Moureh J., Simulation of spray drying in superheated steam using computational fluid dynamics, Drying Technol. 17 (1999) 1313-1326.
10. Goldberg J.E., Prediction of Spray Dryer Performance, Ph.D. Thesis, University of Oxford, UK, 1987.
11. Guo B., Langrish T.A.G., Fletcher D.F., Time-dependent simulation of turbulent flows in axisymmetric sudden expansions, in: Thompson M.C., Hourigan K. (Eds.), Proceedings 13th Australasian Fluid Mechanics Conference, Melbourne, Australia, 1998, pp. 283-286.
12. Guo B., Langrish T.A.G., Fletcher D.F., Numerical simulation of unsteady turbulent flow in axisymmetric sudden expansions, J. Fluids Eng. 123 (2001) 574-587. (Pubitemid 33715575)
13. Guo B., Langrish T.A.G., Fletcher D.F., Simulation of turbulent swirl flow in an axisymetric sudden expansion, AIAA J. 39 (2001) 96-102. (Pubitemid 32872428)
14. Guo B., Langrish T.A.G., Fletcher D.F., CFD simulation of precession in sudden pipe expansion flows with low inlet swirl, Appl. Math. Model. 26 (2002) 1-15.
15. Guo B., Langrish T.A.G., Fletcher D.F., Simulation of gas flow instability in a spray dryer, Chem. Eng. Res. Des. 81 (2003) 631-638.
16. Harvie D.J.E., Langrish T.A.G., Fletcher D.F., A computational fluid dynamics study of a tall-form spray dryer, Trans. IChemE 80 (2002) 163-175.
17. Huang L.X., Kumar K., Mujumdar A.S., Use of computational fluid dynamics to evaluate alternative spray dryer chamber configurations, Drying Technol. 21 (2003) 385-412.
18. Huang L.X., Mujumdar A.S., Spray drying: principle and practice, in: Mujumdar A.S. (Ed.), Guide to Industrial Drying, 2nd enhanced edn., Colour Publications Pvt. Ltd., Mumbai, India, 2004, pp. 143-169.
19. Huang L.X., Mujumdar A.S., Development of a new innovative conceptual design for horizontal spray dryer via mathematical modeling, Drying Technol. 23 (2005) 1169-1187.
20. Huang L.X., Mujumdar A.S., Numerical study of two-stage horizontal spray dryers using computational fluid dynamics, Drying Technol. 24 (2006) 727-733.
21. Huang L.X., Mujumdar A.S., Simulation of an industrial spray dryer and prediction of off-design performance, Drying Technol. 25 (2007) 703-714.
22. Huang L.X., Passos M.L., Kumar K., Mujumdar A.S., A three-dimensional simulation of a spray dryer fitted with a rotary atomizer, Drying Technol. 23 (2005) 1859-1873.
23. Huang L.X., Wang Z., Tang J., Recent progress of spray drying in China [in Chinese], Chem. Eng. (China) 29 (2001) 51-55.
24. Huang L.X., Zheng W.H., Wang C.Z., Mujumdar A.S., Leuenberger H., Spray freeze drying and its applications in drying of plant extracts and pharmaceuticals [in Chinese], Chem. Ind. For. Prod. 27 (2007) 143-146.
25. Jin Y., Chen X.D., A three-dimensional numerical study of the gas/particle interactions in an industrial-scale spray dryer for milk powder production, Drying Technol. 27 (2009) 1018-1027.
26. Jin Y., Chen X.D., Numerical study of the drying process of different sized particles in an industrial-scale spray dryer, Drying Technol. 27 (2009) 371-381.
27. Jin Y., Chen X.D., A numerical model for the particle deposition on industrial milk dryers, Drying Technol. (to appear).
28. Katta S., Gauvin W.H., Some fundamental aspects of spray drying, AIChE J. 21 (1975) 143-150.
29. Kieviet F.G., Modelling Quality in Spray Drying, Ph.D. Thesis, Endinhoven University of Technology, The Netherlands, 1997.
30. Kota K., Langrish T.A.G., Fluxes and patterns of wall deposits for skim milk in a pilot-scale spray dryer, Drying Technol. 24 (2006) 993-1001.
31. Kota K., Langrish T.A.G., Prediction of deposition patterns in a pilot-scale spray dryer using computational fluid dynamics (CFD) simulations, Chem. Prod. Process Model. 2 (2007) Article 26.
32. Langrish T.A.G., Oakley D.E., Keey R.B., Bahu R.E., Hutchinson C.A., Time-dependent flow patterns in spray dryers, Trans. IChemE 71 (1993) 355-360.
33. Langrish T.A.G., Williams J., Fletcher D.F., Simulation of the effects of inlet swirl on gas flow patterns in a pilot-scale spray dryer, Chem. Eng. Res. Des. 82 (2004) 821-833.
34. Langrish T.A.G., Zbicinski I., The effects of air inlet geometry and spray angle on the wall deposition rate in spray dryers, Trans. IChemE 72 (1994) 420-430.
35. Leuenberger H., Plitzko M., Puchkov M., Spray freeze drying in a fluidized bed at normal and low pressure, Drying Technol. 24 (2006) 711-719.
36. Masters K., Spray Drying Handbook, 5th edn., John Wiley & Sons Inc., New York, USA, 1991, pp. 725-726.
37. Maurel A., Ern P., Zielinska B.J.A., Wesfreid J.E., Experimental study of self-sustained oscillations in a confined jet, Phys. Rev. E 54 (1996) 3643-3651.
38. Mezhericher M., Levy A., Borde I., Dropletdroplet interactions in spray drying by using 2D Computational Fluid Dynamics, Drying Technol. 26 (2008) 265-282.
39. Mezhericher M., Levy A., Borde I., Modeling of droplet drying in spray chambers using 2D and 3D computational fluid dynamics, Drying Technol. 27 (2009) 359-370.
40. Murthi R.A., Paterson A.H.J., Pearce D., Bronlund J.E., Controlling SMP stickiness by changing the wall material: feasible or not?, in: Proceedings of Chemeca, Auckland, New Zealand, 2006, CD-ROM, paper 209.
41. Nhumaio G.C.S., Watkins A.P., Yule A.J., Experiments and CFD predictions of two overlapping water sprays issued from airassist atomizers, in: Proceedings ILASS Europe 19th Annual Conference on Liquid Atomization and Spray Systems, 6-8 September 2004, Nottingham, UK, 2004.
42. O'Callaghan J., Cunningham P., Modern process control techniques in the production of dried milk - a review, Lait 85 (2005) 335-342.
43. Oakley D.E., Bahu R.E., Spray/gas mixing behavior within spray dryers, in: Mujumdar A.S., Filkova I. (Eds.), Drying'91, Elsevier, Amsterdam, The Netherlands, 1991.
44. Parti M., Palancz B., Mathematical model for spray drying, Chem. Eng. Sci. 29 (1974) 355-362.
45. Passos M.L., Mujumdar A.S., Mathematical models for improving spray drying processes for foods, Stewart Post-harvest Review, www.stewartpostharvest. com, 2005.
46. Pisecky J., Evaporation and spray drying in the dairy industry, in: Mujumdar A.S. (Ed.), Handbook of Industrial Drying, Vol.1, 2nd edn., Marcel Dekker Inc., New York, USA, 1995, pp. 715-742.
47. Rogers S., Wu D., Saunders J., Chen X.D., Characteristics of milk powders produced by spray freeze drying, Drying Technol. 26 (2008) 404-412.
48. Sommerfeld M., Validation of a stochastic Lagrangian modeling approach for interparticle collisions in homogeneous isotropic turbulence, Int. J. Multiphase Flow 27 (2001) 1829-1858.
49. Sonner C., Protein-Loaded Powders by Spray Freeze Drying, Ph.D. Thesis, Department of Pharmaceutics, Friedrich- Alexandar University, Erlangen, Germany, 2002.
50. Southwell D.B., Langrish T.A.G., Observations of flow patterns in a spray dryer, Drying Technol. 18 (2000) 661-685.
51. Straatsma J., van Houwelingen G., Meulman A.P., Steenbergen A.E., Dry- SPEC2: a computer model of a two-stage dryer, J. Soc. Dairy Technol. 44 (1991) 107-111.
52. Straatsma J., van Houwelingen G., Steenbergen A.E., De Jong P., Spray drying of food products: 1. Simulation model, J. Food Eng. 42 (1999) 67-72.
53. Straatsma J., van Houwelingen G., Steenbergen A.E., De Jong P., Spray drying of food products: 2. Prediction of insolubility, J. Food Eng. 42 (1999) 73-77.
54. Tang J.X., Huang L.X., Wang Z.L., Threestage drying system and its application in dairy product processing [in Chinese], J. Nanjing Forestry 21 (1997) 56-58.
55. Thompson R.I., Nutrient Profile, Functional Properties and Microstructure of Dried Waste Milk Product for Use as a Potential Animal Feed, Ph.D. Thesis, Louisiana State University, USA, 2002.
56. Ullum T., Simulation of a spray dryer with rotary atomizer: the appearance of vortex breakdown, in: Proceedings of the 15th International Drying Symposium, 20-23 August 2006, Budapest, Hungary, pp. 251-257.
57. Verdurmen R.E.M., Menn P., Ritzert J., Blei S., Nhumaio G.C.S., Sonne Sørensen T., Gunsing M., Straatsma J.,Verschueren M., Sibeijn M., Schulte G., Fritsching U., Bauckhage K., Tropea C., Sommerfeld M., Watkins A.P., Yule A.J., Schønfeldt H., Simulation of agglomeration in spray drying installations: the EDECAD project, Drying Technol. 22 (2004) 1403-1462.
58. Verdurmen R.E.M., Straatsma H., Verschueren M., van Haren J.J., Smit E., Bargeman G., De Jong P., Modeling spray drying processes for dairy products, Lait 82 (2002) 453-463.
59. Verdurmen R.E.M., Verschueren M., Gunsing M., Straatsma H., Simulation of agglomeration in spray dryers: the EDECAD project, Lait 85 (2005) 343-351.
60. Westergaard V., Milk powder technology: evaporation and spray drying, Niro A/S, Søborg, Denmark, 1994, pp. 18-121.
61. Williams A.M., Jones J.R., Paterson A.H.J., Pearce D.L., Effect of fines on agglomeration in spray dryers: an experimental study, Int. J. Food Eng. (2009) DOI: 10.2202/1556- 3758.1635.
62. Woo M.W., The simulation of spray drying under unsteady flow using CFD, 2008, private communications.
63. Woo M.W., Daud W.R.W., Tasirin S.M., Talib M.Z.M., Controlling food powder deposition in spray dryers: wall surface energy manipulation as an alternative, J. Food Eng. 94 (2008) 192-198.
64. Woo M.W., Daud W.R.W., Tasirin S.M., Talib M.Z.M., Effect of wall surface properties at different drying kinetics on the deposition problem in spray drying, Drying Technol. 26 (2008) 15-26.
65. Wu Z.H., Liu X.D., Simulation of spray drying of a solution atomized in a pulsating flow, Drying Technol. 20 (2002) 1101-1121.
66. Xiao Z.F., Xie X.Y., Yuan Y.J., Liu X.D., Influence of atomizing parameters on droplet properties in a pulse combustion spray dryer, Drying Technol. 26 (2008) 427-432.
67. Xu P., Ray M.B., Mujumdar A.S., Yu B., Design and optimize hydrocyclones with CFD model, in: Proceedings of 8th World Congress of Chemical Engineering, 23-27 August 2009, Montreal, Canada (to appear).