Heat and mass transport in an industrial tunnel dryer: Modeling and simulation applied to hollow bricks

Applied Thermal Engineering

Volumn 55, Issue 1-2, 2013, Pages 78-86

  Da Silva Almeida, Genival ^a   Barbosa Da Silva, Joselito ^b   Joaquina E Silva, Carlota ^b   Swarnakar, Ramdayal ^b   De Araújo Neves, Gelmires ^b   Barbosa De Lima, Antonio Gilson ^b  

^a Ciência e Tecnologia de Roraima   (Brazil)

^b FEDERAL UNIVERSITY OF CAMPINA GRANDE   (Brazil)

Author keywords

Cross flow; Drying; Finite volume; Hollow brick; Industrial dryer

Indexed keywords

CROSS FLOWS; FINITE VOLUME; HEAT AND MASS TRANSPORTS; HOLLOW BRICKS; INDUSTRIAL DRYERS; INTERPOLATION SCHEMES; MASS AND ENERGY BALANCE; MODELING AND SIMULATION;

BRICK; COMPUTER SIMULATION; DRYERS (EQUIPMENT); FINITE VOLUME METHOD; INDUSTRY; MATHEMATICAL MODELS; MOISTURE DETERMINATION;

DRYING;

EID: 84875871097     PISSN: 13594311     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.applthermaleng.2013.02.042     Document Type: Article

References (38)

1. W.D. Callister Jr. Materials Science and Engineering an Introduction seventh ed. 2007 John Wiley & Sons, Inc USA
2. W.D. Callister Jr., and D.G. Rethwisch Fundamentals of Materials Science and Engineering: An Integrated Approach 3rd. ed. 2008 John Wiley & Sons, Inc USA
3. D.A. Brosnan, and G.C. Robinson Introduction to Drying of Ceramics 2003 The American Ceramic Society Ohio
4. J.S. Reed Principles of Ceramics Processing 1995 John Wiley & Sons, Inc. New York
5. D.O. Avelino, J.J.S. Nascimento, A.G.B. Lima, Simulation of the heat and mass transport during drying of holed ceramic bricks, in: 8°Congresso Iberoamericano de Engenharia Mecânica, Cusco, Peru, 2007. (in Portuguese).
6. V.R.J. Batista, J.S. Nascimento, and A.G.B. Lima Drying and firing of common and holed ceramic bricks including dimensions variations and structural damages Revista Eletrônica de Materiais e Processos 3 1 2008 46 61 (in Portuguese)
7. V.R. Batista, J.J.S. Nascimento, and A.G.B. Lima Drying and volumetric retraction of solid and hollow ceramic bricks: a theoretical and experimental investigation Revista Matéria 14 4 2009 1088 1100 (in Portuguese)
8. W.P. Silva, V.S.O. Farias, G.A. Neves, and A.G.B. Lima Modeling of water transport in roof tiles by removal of moisture at isothermal conditions Heat and Mass Transfer 48 5 2012 809 821
9. V.P. Nicolau, W.A. Lehmkuhl, W.M. Kawaguti, A.P. Dadam, R.F. Hartke, T.G. Jahn, Numerical analysis of a continuous dryer used in red ceramic industry, in: Proceedings of the III National Congress of Mechanical Engineering, Belém, Brazil, 2004 pp. 1-10 (in Portuguese).
10. E.W.F. Santana, Evaluation of Drying and Firing of Ceramic Plates. Master dissertation in Science and Materials Engineering, Federal University of Campina Grande, Campina Grande, Brazil, 2006 (in Portuguese).
11. G.M. Santos, Study of Thermal Behavior of a Tunnel Kiln Applied to Red Ceramic Industry. Master dissertation in Mechanical Engineering, Federal University of Santa Catarina, Florianópolis, Brazil, 2001 (in Portuguese).
12. R.P. Farias, Biological products drying simulation in crossflow dryer, Master dissertation in Mechanical Engineering, Federal University of Campina Grande. Campina Grande, Brazil, 2003 (in Portuguese).
13. R.P. Farias, D.C. Santiago, P.R.H. Holanda, and A.G.B. Lima Drying of grains in conveyor dryer and cross flow: a numerical solution using finite-volume method Revista Brasileira de Produtos Agroindustriais, Campina Grande 6 1 2004 1 16
14. J.J.S. Nascimento, B.J.T. Mederos, F.A. Belo, and A.G.B. Lima Mass transport with shrinkage inside parallelepiped solids Información Tecnológica 16 1 2005 35 41 (in Spanish) (Pubitemid 40307790)
15. J.J.S. Nascimento, A.G.B. Lima, B.J. Teruel, and F.A. Belo Heat and mass transfer with shrinkage during the ceramic bricks drying Información Tecnológica 17 6 2006 125 132 (in Spanish)
16. A. Sander, D. Skanki, and B. Nenad Heat and mass transfer models in convective drying of clay slabs Ceramics International 29 2003 641 643
17. T. Nishikawa, T. Gao, M. Hibi, M. Takatsu, and M. Ogawa Heat transmission during thermal shock testing of ceramics Journal of Materials Science 29 1994 213 219
18. Y. Itaya, S. Taniguchi, and M.A. Hasatani Numerical study of transient deformation and stress behavior of a clay slab during drying Drying Technology 15 1 1997 1 21 (Pubitemid 127535054)
19. S. Su Modeling of multi-phase moisture transfer and induced stress in drying clay brick Applied Clay Science 12 1997 189 207 (Pubitemid 127426696)
20. A.J.J. van der Zanden, A.M.E. Schoenmakers, and P.J.A.M. Kerkof Isothermal vapour and liquid transport inside clay during drying Drying Technology 14 3-4 1996 647 676 (Pubitemid 126494761)
21. A.J.J. van der Zanden Modelling and simulating simultaneous liquid and vapour transport in partially saturated porous materials Mathematical Modeling and Numerical Techniques in Drying Technology 1997 Marcel Dekker, Inc. New York, USA
22. M.A. Cadé, J.J.S. Nascimento, and A.G.B. Lima Drying of holed ceramic bricks: an approach by finite-volumes Revista Matéria 10 3 2005 443 453 (in Portuguese)
23. J.B. Silva, G.S. Almeida, W.C.P.B. Lima, G.A. Neves, and A.G.B. Lima Heat and mass diffusion including shrinkage and hygrothermal stress during drying of holed ceramics bricks Defect and Diffusion Forum vol. 312-315 2011 pp. 971-976
24. V.S.O. Farias, W.P. Silva, C.M.D.P. Silva, and A.G.B. Lima Three-dimensional diffusion in arbitrary domain using generalized coordinates for the boundary condition of the first kind: application in drying Defect and Diffusion Forum vol. 326-328 2012 pp. 120-125
25. J.B. Silva, G.S. Almeida, G.A. Neves, W.C.P.B. Lima, S.R. Farias Neto, and A.G.B. Lima Heat and mass transfer and volume variations during drying of industrial ceramic bricks: an experimental investigation Defect and Diffusion Forum vol. 326-328 2012 pp. 267-272
26. J.F.M. Velthuis, Simulation model for industrial dryers: reduction of drying times of ceramics & saving energy, in: Proceedings of the International Drying Symposium (Drying' 96), Krakow, Poland, 1996, pp. 1323-1328.
27. G. Recco Study to utilization of thermal energy from ceramic kiln to ceramic drying Cerâmica Industrial 13 3 2008 23 27 (in Portuguese)
28. W.A. Lehmkuhl, Numerical and Experimental Analyses of a Continuous Dryer Used in Red Ceramic Industry. Master dissertation in Mechanical Engineering), Federal University of de Santa Catarina, Florianópolis, Brazil, 2004 (in Portuguese).
29. R.F. Hartke, Numerical analysis of a continuous dryer used in red ceramic industry, in: Proceedings of the 10th Brazilian Congress of Thermal Sciences and Engineering, Rio de Janeiro, Brazil, 2004 (in Portuguese).
30. V.P. Nicolau, R.F. Hartke, T.G. Jahn, W.A. Lehmkuhl, Numerical and experimental analyses of a intermittent kiln to firing of ceramic products, in: Proceedings of the National Congress of Mechanical Engineering, João Pessoa, Brazil, 2002, pp. 1-10 (in Portuguese).
31. G.S. Almeida, Simulation and experimentation of red ceramics drying in industrial thermal systems, Doctoral Thesis in Process Engineering, Federal University of Campina Grande, Campina Grande, Brazil, 2008 (in Portuguese).
32. Z. Pakowski, Z. Bartczak, C. Strumillo, and S. Stenstrom Evaluation of equations approximating thermodynamic and transport properties of water, steam and air for use in CAD of drying processes Drying Technology 9 1991 753 773 (Pubitemid 21679112)
33. R.Y. Jumah, A.S. Mujumdar, and G.S.V.A. Raghavan Mathematical model for constant and intermittent batch drying of grains in a novel rotating jet spouted bed Drying Technology 14 1996 765 802
34. S.J. Rossi Psychrometry 1987 FUNAPE João Pessoa, Brazil (in Portuguese)
35. F.P. Incropera, and D.P. De Witt Fundamentals of Heat and Mass Transfer 2002 John Wiley & Sons New York, USA
36. C.R. Maliska Computational Heat Transfer and Fluid Mechanics 2004 LTC-Livros Técnicos e Científicos Editora S.A Rio de Janeiro, Brazil (in Portuguese)
37. S.V. Patankar Numerical Heat Transfer and Fluid Flow 1980 Hemisphere Publishing Corporation New York, USA
38. H.K. Versteeg, and W. Malalasekera An Introduction to Computational Fluid Dynamics: The Finite Volume Method 1995 Prentice Hall London, England