Effect of wall surface properties at different drying kinetics on the deposition problem in spray drying

Drying Technology

Volumn 26, Issue 1, 2008, Pages 15-26

  Woo, Meng Wai ^a   Daud, Wan Ramli Wan ^a   Tasirin, Siti Masrinda ^a   Talib, Meor Zainal Meor ^a  

^a UNIVERSITI KEBANGSAAN MALAYSIA   (Malaysia)

Author keywords

Deposition; Fruit juices; Spray drying; Surface energy; Wall materials

Indexed keywords

DEPOSITION; DIELECTRIC PROPERTIES; FRUIT JUICES; INTERFACIAL ENERGY; MOLECULAR WEIGHT; SURFACE ROUGHNESS;

DRYING KINETICS; DRYING RATE;

SPRAY DRYING;

DEPOSITION; DIELECTRIC PROPERTIES; FRUIT JUICES; INTERFACIAL ENERGY; MOLECULAR WEIGHT; SPRAY DRYING; SURFACE ROUGHNESS;

EID: 37849005412     PISSN: 07373937     EISSN: 15322300     Source Type: Journal    
DOI: 10.1080/07373930701781033     Document Type: Article

References (31)

1. Bhandari, B. R., Datta, N. and Howes, T. (1997) Problems associated with spray drying of sugar-rich food. Drying Technology, 15:2, pp. 671-684.
2. Ozmen, L. and Langrish, T. A. G. (2003) An experimental investigation of the wall deposition of milk powder in a pilot-scale spray dryer. Drying Technology, 21:7, pp. 1253-1272.
3. Oakley, D. E. (1994) Scale-up spray dryers with the aid of computational fluid dynamics. Drying Technology, 12:1, pp. 217-233.
4. Masters, K. (1994) Scale-up of spray dryer. Drying Technology, 12:1, pp. 235-257.
5. Bhandari, B. R., Datta, N., Crooks, R., Howes, T. and Rigby, S. (1997) A semi-empirical approach to optimise the quantity of frying aids required to spray dry sugar-rich food. Drying Technology, 15:10, pp. 2509-2525.
6. Papadakis, S. E., Gardeli, C. and Tzia, C. (2006) Spray drying of raisin juice concentrate. Drying Technology, 24, pp. 173-180.
7. Roustapour, O. R., Hosseinalipour, M. and Ghobadian, B. (2006) An experimental investigation of lime juice drying in a pilot plant spray dryer. Drying Technology, 24, pp. 181-188.
8. Cano-Chauca, M., Stringheta, P. C., Ramos, A. M. and Cal-Vidal, J. (2005) Effect of the carriers on the microstructure of mango powder obtained by spray drying and its functional characterization. Innovative Food Science and Emerging Technologies, 6, pp. 420-428.
9. Langrish, T. A. G. Proceedings of the 2nd Asian-Oceanic Drying Symposium ADC'01, pp. 393-418.
10. Schuck, P., Mejean, S., Dolivet, A. and Jeantet, R. (2005) Thermohygrometric sensor: A tool for optimizing the spray drying process. Innovative Food Science and Emerging Technologies, 6, pp. 45-50.
11. Bhandari, B. and Howes, T. (2005) Relating the stickiness property of foods undergoing drying and dried products to their surface energetics. Drying Technology, 23, pp. 791-797.
12. Saunders, S. R., Hamann, D. D. and Lineback, D. R. (1992) A systems approach to food material adhesion. Lebensmittel-Wissenschaft Und-Technologie, 25, pp. 309-315.
13. Michalski, M. C., Desobry, S., Babak, V. and Hardy, J. (1999) Adhesion of food emulsions to packaging and equipment surfaces. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 149, pp. 107-121.
14. Clint, J. H. and Wicks, A. C. (2001) Adhesion under water: Surface energy considerations. Adhesion and Adhesives Technology, 21:4, pp. 267-273.
15. Adhikari, B., Howes, T., Shrestha, A. K. and Bhandari, B. R. (2007) Development of whey protein isolate and lactose droplets during convective drying. Chemical Engineering and Processing, 46, pp. 420-428.
16. Kota, K. and Langrish, T. A. G. (2006) Fluxes and patterns of wall deposits for skim milk in a pilot-scale spray dryer. Drying Technology, 24, pp. 993-1001.
17. Murthi, R. A., Paterson, A. H. J., Pearce, D. and Bronlund, J. E. pp. 17-20. Auckland, New Zealand
18. Murthi, R., Paterson, T., Pearce, D. and Bronlund, J. pp. 23-27. Orlando, Florida
19. Birchal, V. S., Huang, L., Mujumdar, A. S. and Passos, M. L. (2006) Spray dryers: Modelling and simulation. Drying Technology, 24, pp. 359-371.
20. (1984) Official Methods of Analysis;, pp. 573-574. AOAC, VA
21. Blei, S. and Sommerfeld, M. (2006) pp. 307-314. Budapest, Hungary
22. Brennan, J. G., Herrera, J. and Jowitt, R. (1971) A study of some the factors affecting the spray drying of concentrated orange juice on a laboratory scale. Journal of Food Technology, 6, pp. 295-307.
23. Bhandari, B. R., Senoussi, A., Dumoulin, E. D. and Lebert, A. (1993) Spray drying of concentrated fruit juices. Drying Technology, 11:5, pp. 1081-1092.
24. Collares, F. P., Finzer, J. R. D. and Kieckbusch, T. G. (2004) Glass transition control of the detachment of food pastes dried over glass plates. Journal of Food Engineering, 61, pp. 261-267.
25. Navidi, W. C. (2006) Statistics for Engineers and Scientists, McGraw-Hill, New York
26. Huang, L. X., Kumar, K. and Mujumdar, A. S. (2006) A comparative study of a spray dryer with rotary disc atomizer and pressure nozzle using computational fluid dynamic simulations. Chemical Engineering and Processing, 45, pp. 461-470.
27. Johnson, R. K. and Law, S. E. (1996) Electrostatic-enhanced atomization for spray drying of milk. Lebensmittel-Wissenschaft Und-Technologie, 29, pp. 71-81.
28. Guardiola, J., Rojo, V. and Ramos, G. (1996) Influence of particle size, fluidization velocity and relative humidity on fluidized bed electrostatics. Journal of Electrostatics, 37, pp. 1-20.
29. Chen, X. D., Rutherford, L. and Lloyd, R. J. (1994) Preliminary results of milk powder deposition at room temperature on a stainless steel surface mimicking the ceiling of a spray dryer. Transactions of the Institute of Chemical Engineers, 72, pp. 170-175.
30. Langrish, T. A. G., Chan, W. C. and Kota, K. (2007) Comparison of maltodextrin and skim milk deposition rates in a pilot scale dryer. Powder Technology
31. Bejan, A. and Kraus, D. A. (2003) Heat Transfer Handbook, John Wiley & Sons