Micro and nanomanufacturing

Micro and Nanomanufacturing

Volumn , Issue , 2007, Pages 1-701

  Jackson, Mark J ^a  

^a PURDUE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84892334104     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/b136902     Document Type: Book

References (474)

1. Campbell SA, The Science and Engineering of Microelectronic Fabrication - 2nd Edition, Oxford Series in Electrical Engineering - Oxford University Press, 2005.
2. Yeager RC, Introduction to Microelectronic Fabrication, Volume V, Modular Series on Solid State Devices - edited by Neudeck and Pierret, Addison Wesley Press, Reading, MA, 1988.
3. s, Microwave and Monolithic Circuits Symposium Digest of Papers, IEEE, p.p. 99-102, 1996.
4. Piazza GR, R. Abdolvand, and F. Ayazi, Voltage-Tunable, Piezoelectrically-Transduced Single Crystal Silicon Resonators on SOI Substrates, 2003 IEEE MEMS Conference, Kyoto, Japan, p.p. 149-152, 2003.
5. Deep Reactive Ion Etching Patent Number 5501893, Robert Bosch GmbH, 1996.
6. Yao JJ, Topical Review: RF MEMS from a Device Perspective, Journal of Micromechanics and Microengineering, 10, R9-R38, 2000.
7. Hutcheson GD, The First Nanochips, Scientific American, p.p. 76-83, April 2004.
8. Taur Y, IBM Journal of Research and Development, 46, 2/3, 2002.
9. th Design and Automation Conference, New Orleans, USA, p.p. 88-93, 2002.
10. Whitesides GM and Love JC, The Art of Building Small, Scientific American - Special Issue on Nanotechnology, p.p. 39- 47, September 2001.
11. Hu J et al.. Using Soft Lithography to Fabricate GaAs/AlGaAs Heterostructure Field Effect Transistors, Applied Physics Letters, 71, (14), October 1997.
12. Giessibl FJ, Advances in Atomic Force Microscopy, Accessed on line at: xxx.lanl.gov/arXiv:cond-mat/0305119. Accessed December 2005.
13. Crommie MF, Lutz CP, Eigler DM, Science, 262, 218-220, 1993.
14. Braun KF and Reider KH, Phys. Rev. Lett, 88, 096801, 2002.
15. Marcus R, Ravi T, Gmitter K, Chin K, Liu D, Orvis W, Ciarlo D, Hunt C, Truijillo J, Formation of Silicon Tips with Inm Radius, Appl. Phys. Lett., 56, (3), 236-238, 1990.
16. Giessibl FJ and Binnig G, True Atomic Resolution on KBr with a Low Temperature Atomic Force Microscope in Ultra High Vacuum, Ultramicroscopy, 42-44, 281-286, 1992.
17. Giessibl FJ and Trafas BM, Piezoresistive Cantilevers Utilized for Scanning Tunneling and Scanning Force Microscopes in Ultra High Vacuum, Rev. Sci. Instrum., 65, 1923-1929, 1994.
18. Erlandsson R, Olsson L, and Martensson P, Inequivalent Atoms and Imaging Mechanisms in AC-Mode Atomic Force Microscopy, Phys. Rev. B., 54, R8309-R8312. 1994.
19. Lantz M, Hug HJ, Hoffman P, van Schendel P, Kappenberger P, Martin S, Baratoff A, and Gunderrodt H, Quantitative Measurement of Short-Range Chemical Bonding Forces, Science, 291, 2580-2583, 2001.
20. th International Conference on Scanning Tunneling Microscopy, Colorado, 1995.
21. Requicha A, Nanorobots, NEMS, and Nanoassembly, Proceedings of the IEEE Special issue on nanoelectronics and nanoprocessing, 91, (11), p.p. 1922-1933, November 2003. www-lmr.usc.edu/lmr/html/publications.html. Accessed December 2005.
22. Bezyadin A, Dekker C, Scmid G, Electrostatic Trapping of Single Conducting Nanoparticles Between Nanoelectrodes, Appl. Phys. Lett., 71, (9), September 1997.
23. Avouris P et al.. Applied Surf. Sci., 141, 210-209, 1999.
24. Wang X, Bullen D, Zou J, Ryu K, Chung SW, and Mirkin CA, Linear Arrays for Dip Pen Nanolithography, Materials Research Bull., 26, (7), p.p. 535-538, July 2001.
25. Dresselhaus M, January 1998 - Website accessed December 2005. http://http://phvsicsweb.org/article/world/n1/1/9.
26. Fukuda H, Arai J, and Dong K, Assembly of Nanodevices with Carbon Nanotubes Through Nanorobotic Manipulators, Proc. IEEE, 91, (11), p.p. 1803-1818, November 2003.
27. Cheung CL, Hafner J, Lieber CM, Carbon Nanotube Atomic Force Microscopy Tips: Direct Growth By Chemical Vapor Deposition and Application to High Resolution Imaging, PNAS, 97, (8), p. 3813, April 11, 2000.
28. Bachtold A et al.. Science, 294, p.l317, 2000.
29. Derycke V, Martel R, Appenzeller J, and Avouris P, Carbon Nanotube Inter and Intramolecular Logic Gates, Nano Letters, 1, p.p. 453-456, 2001.
30. Ehrfeld W, Becker EW, Hagmann P, Maner P and Munchmeyer P, Microelectron. Engin., 1986, 4, pp 35-56.
31. Bacher W et al., lEE Transac. Industrial Electron, 42 (5), 1995.
32. Hruby, J (Ed), Goettert, J. Proceedings HARMST 2003, Monterey, June 2003.
33. Tolfree DWL, Proceedings of COMS2003, Amsterdam, Netherlands, Sept 2003.
34. Goettert, J., Proceedings of COMS2004, Edmonton, Canada, Sept 2004.
35. NEXUS 'Market Analysis for Microsystems 2000-2005, Feb 2002.
36. nd Edition, 2002, CRC Press).
37. Tolfree DWL, Microfabrication using Synchrotron Radiation, Progress Reports in Physics, 61, 4, 1998.
38. Cerrina F, Handbook on Lithography, SPIE edition, 1996.
39. Becker E, Betz H, Ehrfeld W, Glashauser W, Michael H, Munchmeyer D, Pongratz S and Von Siemens R, 1982, Naturwissenschaften, 69, 520-523.
40. Ehrfeld W, Becker E W, Hagmann P, Maner P and Munchmeyer P, Microelectron. Engin., 1986, 4, 35-56.
41. Ehrfeld W, Bley P, Gotz F, Hagmann P, Mane A, Mohr J and Herbert O, 1987, ProcIEEE Micro robots and Teleoperators Workshop (Fabrication of Microstructures using the LIGA process), 87, 1-11.
42. Ehrfeld W, Bley P, Gotz J, Munchmeyer D, Mohr J, Schulb W, 1988, JVac. Sci.B6.
43. Ehrfeld W and Lehr H, 1994, Journal de Physique, 4, p C9-229- 236.
44. Ehrfeld W and Lehr H, 1995, Rad. Phys & Chem., 45, pp 349- 365.
45. Bley P, Gottert, Haemening M, Himmelhaus M, Menz W, Mohr J, Muller C and Wallrabe U, 1991, Microsystem Technologies 1991 (ed H Reichl), 302-314, Heidelberg, Springer-Verlag.
46. Bley P, 1993, Interdisciplinary Science Reviews, 18, 3, p. 267.
47. Harmening M, Bacher W, Bley P, El-Kholi, Kalb H, Kowanz, Menz, Michel A and Mohr J., 1992, MEMS, No. 0-7803-0497-7/92. 202- 207, New York IEEE.
48. Tolfree D and Ehrfeld W, 1994, Proc. Tech. Trans.Conf, Published by TCD.
49. Bacher W, Menz W and Mohr J, 1995, lEE Trans, on Industrial Elect. Vol. 42.
50. Guckel H, Skrobis K, Christenson T, Klein J, Han, Choi B, Loverell E and Chapman T, 1991, Proc. Transducers (San Francisco ) (NewYork: IEEE).
51. Guckel H, 1993, N. I. M. in Physics Res, Section B, B79, 1-4, pp 247-8.
52. Guckel H, Skrobis K, Christenson T and Klein J, 1994, SPIE's Symposium on Microhthography, p.p. 2194-09.
53. Guckel H and Christenson T R, 1995, SPIE Meeting, Oct. 1995, Austin, Texas.
54. Tomboulian DH and Hatman, 1956, Phys. Rev. 102, 1423-47.
55. Sokolov AA and Temov IM, 1957, Sov. Phys., JETP, 4, 396-400.
56. Sokolov AA and Temov IM, 1968, Synchrotron Radiation, (Berlin : Academic- Verlag).
57. Godwin RP 1969, Synchrotron Radiation as a Light Source, (Springer Tracts in Modem Physics 51, ed. J. Hohler.
58. Rowe EM, 1979, Synchrotron Radiation (topics in Current Physics 10), ed. C. Kunz, (Berlin Springer), pp 25-54.
59. Winick H, 1980, Synchroton Radiation Research, ed. Winick and Doniach (New York: Plenum), p.p. 11-60.
60. Grobman W, 1985, Synchrotron Radiation Research, Winick H ed. Pergamon, N.Y.
61. Temov IM, Mikhailin W and Khalilov VR, 1985, Synchrotron Radiation and its Applications (New York: Harwood).
62. Marks N, 1995, Radiat. Phys. Chem., 45, 3, pp 315-331.
63. Turner S, 1989, S3mchrotron Radiation and Free Electron Lasers, CERN Ace. School, Chester, Cem 90-30.
64. Krinsky S, Perlman M L and Watson R E, 1993, Handbook on Synchrotron Radiation, E Koch ed.. North Holland, pp. 65-172.
65. Tomboulian D H and Hatman, 1956, Phys. Rev., 102, 1423-47.
66. Timothy JG and Madden R P, 1983, Handbook on Synchrotron Radiation, Vol 1A, editor E E Koch (Amersterdam: North-Holland), pp325-66.
67. Elleaume P, 1990, Phys. Scripta, T31, 67-71.
68. Yamamonto S, Shio T, Sasaki S and Kitamura H, 1989, Rev Sci. Instrum., 60, 1834-7.
69. Galhotra V, Marques C, Desta Y, Kelly K, Despa M, Pendse A, and Collier A., in Proceedings of the SPIE: Micromachining nd Microfabrication Process Technology II, Austin, TX, 1996, p.p. 168-173.
70. Elwenspoek J and Jansen H, Silicon Micromachining, Cambridge University Press, 1998, Cambridge, U.K.
71. Hanemann T, Heckele M and Plotter V, 2000, Current status of micromolding technology, Polym. News, 25, 224-9.
72. Wallrabe U, Dittrich H, Friedsam G, Hanemann Th, Mohr J, Muller K, Plotter V, Ruther P, Schaller Th and ZiBler W, 2002, Micromolded easy-assembly multi fiber connector: RibCon, Microsyst. Technol., 8, 83-7.
73. Ehrfeld W, Bley P, Gotz F, Hagmann P, Maner A, Mohr J, Moser H O, Miinchmeyer D, Schelb W, Schmidt D and Becker E W 1987 Fabrication of microstructure using the LIGA process Proc. IEEE Micro-Robots and Teleoperators Workshop (Hyannis, Cape Cod, MA, 9-11 Nov. 1987), ed. K J Gabriel aad W S N Trimmer, IEEE Catalogue Number 87TH0204- 8.
74. Hagmann P, Ehrfeld W and Vollmer H, 1987, Fabrication of microstructures with extreme structural heights by reaction injection molding, First Meeting of the European Polymer Federation European Symp. On Polymeric Materials, (Lyon, France, 14-18 Sept.), paper EPD05.
75. Heckele M, Bacher W and Mtiller K D, 1998, Hot embossing-the molding technique for plastic microstructures, Microsyst. Technol., 4, 122- 4.
76. Rogge T, Rummler Z and Schomburg W K, 2002, Piezo-driven polymer microvalve manufactured by the AMANDA process, Proc. of Eurosensors XVI, (Prague, 15-18 Sept. 2002), pp 214-7.
77. Niggemann M, Blaesi B, Boemer V, Gombert A, Klicker M, Kuebler V, Lalanne P and Wittwer V, 2001, Periodic microstructures for large area applications generated by holography, Conf. Physics. Theory, and Applications of Periodic Structures in Optics, (San Diego, CA, 1-2 Aug. 2001), Proc. SPIE 4438, 108-15.
78. Jian L, Desta Y M and Goettert J, 2001, Multilevel microstructures and mold inserts fabricated with planar and oblique x-ray lithography of SU-8 negative photoresist, Conf Micromachining and Microfabrication Process Technology VII, (San Francisco, CA, 22-24 Oct. 2001), Proc. SPIE 4557, 69-76.
79. O'Donnell T, McCloskey P, Brunet M, Winfield R, Mathuna S C O, Stephen A and Metev S, 2000, High aspect ratio RF coils fabricated using laser processing and micro-molding techniques, Proc. European Microelectronics Packaging and Interconnection Symposium, (Prague, Czech Republic, 18-20 June 2000), pp 169-74, ISBN: 80-238-5509-3.
80. Mohr J, 1998, LIGA-A technology for fabricating microstructures and microsystems. Sensors Mater., 10, 363-7.
81. Chung S, Hein H, Mohr J, Pantenburg J-J and Wallrabe U, 2000, LIGA technology today and its industrial applications, Proc. SPIEs Int. Conf on Microrobotics and Microassembly II, (Boston, 5-6 Nov. 2000), Proc. SPIE 4184, 44-55.
82. Martynova L, Locascio L E, Gaitan M, Kramer G W, Christensen R G and MacCrehan W A, 1997, Fabrication of plastic microfluid channels by imprinting methods, Ann. Chem., 69, 4783-9.
83. Haines K, 1996, Development of embossed holograms, Proc. SPIE 2652, 45-52.
84. Heckele M, 1997, Aufbau und Betrieb einer Kleinserienfertigung von LIGA-Spektrometem, Swiss Plastics, 19, 5-9.
85. Shan X C and Maeda R, 2002, Development of a low-cost 8 x 8 optical switch using micro-hot embossing 2002 lEEE/LEOS Int. Conf Optical MEMS (Lugano, Switzerland, 20-23 Aug. 2002, IEEE (2002)), pp 21- 2 (Catalogue no 02EX610), ISBN: 0-7803-7595-5.
86. Hashiura Y, Ikehara T, Kitajima A, Goto H and Maeda R, 2001, Optical switch array based on microforming process, Conf. Device and Process Technologies for MEMS and Microelectronics (Adelaide, SA, Austraha, 17-19 Dec. 2001), Proc. SPIE, 4592, 414-21.
87. Ulrich R, Weber H P, Chandross E A, Tomlinson W J and Franke E A, 1972, Embossed optical waveguides, Appl. Phys. Lett., 20, 213-5.
88. th Electronic Components and Technology Conference (San Diego, CA, USA, 1-4 June 1999) (Catalogue no 99CH36299), ISBN: 0-7803-5231-9, pp 1164-6.
89. David C, Haberling P, Schnieper M, Sochtig J and Zschokke C, 2002, Nano-structured anti-reflective surfaces replicated by hot embossing, Microelectron. Eng., 61-62, 435-40.
90. Knop K 1976, Color pictures using the zero diffraction order of phase grating structures. Opt. Commun., 18, 298-303.
91. Grigaliunas V, Kopustinskas V, Meskinis S, Margelevicius M, Mikulskas I and Tomasiunas R, 2001, Replication technology for photonic band gap applications, Conf Optoelectronics I, Materials and Technologies for Optoelectronics Devices, Symposium G of the 2000 E-MRSlUMRS- ICEM Spring Conf., (Strasbourg, France, 20 May-2 June 2000), Opt. Mater., 17, 15-8.
92. Olsson A, Larsson O, Horn J, Lundbladh L, Ohman O and Stemme G, 1997, Valve-less diffuser micropumps fabricated using thermoplastic replication, Proc. IEEE Tenth Annu. Int. Workshop on Micro-Electro Mechanical Systems, MEMS'97 (Nagoya, Japan, 26-30 Jan. 1997), pp 305- 10.
93. Schomburg W K, Ahrens R, Bacher W, Martin J and Saile V, 1999, AMANDA-Surface micromachining, molding, and diaphragm transfer, Sensors Actuators A, 76, 343-8.
94. Dopper J, Clemens M, Ehrfeld W, Kamper K-P and Lehr H, 1996, Development of low-cost injection molded micropumps, Actuator'96: Proc. Fifth Int. Conf. on New Actuators, pp 37-40.
95. Fahrenberg J, Bier W, Maas D, Menz W, Ruprecht R and Schomburg W K, 1995, Micro valve system fabricated by thermoplastic molding, J. Micromech. Microeng., 5, 169-71.
96. Goll C, Bacher W, Bustgens B, Maas D, Menz W and Schomburg W K, 1996, Microvalves with bistable buckled polymer diaphragms, J. Micromech. Microeng., 6, 77-9.
97. Goll C, Bacher W, Bustgens B, Maas D, Ruprecht R and Schomburg W K, 1997, Electrostatically actuated polymer micro valve equipped with a movable membrane electrode, J. Micromech. Microeng., 7, 224-6.
98. Gerlach A, Knebel G, Guber A, Heckele M, Herrmann D, Muslija A and Schaller T, 2002, Microfabrication of single-use plastic microfluidic devices for high-throughput screening and DNA analysis, Microsyst. TechnoL, 7, 265-8.
99. Rummler Z, Berndt M, Hartl H-G, Hempel M, Peters R and Schomburg W K, 2000, Micro-degasser made of inert polymers for HPLC devices, ASME Winter Annual Meeting (Orlando, FL, 5-10 Nov. 2000).
100. Lee G-B, Chen S-H, Huang G-R, Lin Y-H, Sung W-C and Lin YH, 2001, Microfabricated plastic chips by hot embossing methods and their applications for DNA separation and detection. Sensors Actuators B, 75, 142-8.
101. Blankenstein G, 2000, Microfluidic devices for biomedical applications, MST News (Sept. 2000), 14-15, published by: VDIAHOETechnologiezentrumlnformationstechnik.
102. Grass B, Neyer A, Johnck M, Siepe D, Eisenbeiss F, Weber G and Hergenroder R, 2001, A new PMMA-microchip device for isotachophoresis with integrated conductivity detector. Sensors Actuators B, 72, 249-58.
103. Weston DF, Smekal T, Rhine D B and Blackwell J, 2001, Fabrication of microfluidic devices in silicon and plastic using plasma etching, J. Vac. Sci. Technol. B, 19, 2846-51.
104. Kashanim D, Williams V, Shvets I V, Volkov Y and Kelleher D, 2000, Microfluidic biochips for cell guidance and separation, Proc. First 142 Micro-and Nanomanufacturing Annu. Int. lEEE-EMBS Special Topic Conference on Microtechnologies in Medicine and Biology (Lyon, France, 12-14 Oct. 2000), pp 279-82, (Catalogue no. 00EX451).
105. Martin J, Bacher W, Hagena O F and Schomburg W K, 1998, Strain gauge pressure and volume-flow transducers made by thermoplastic molding and membrane transfer, Proc. Int. Workshop on Micro-Electro Mechanical Systems, MEMS'98 (Heidelberg, Germany, 25-29 Jan. 1998), pp 361-6.
106. Dittman D, Ahrens R, Rummler Z, Schlote-Holubek K and Schomburg W K, 2001, Low-cost flow transducer fabricated with the AMANDA process, 11th Int. Conf On SoUd-State Sensors and Actuators, Transducers'Ol (Munich, Germany, 10-14 June 2001), paper 4B2.10P.
107. Chou SY, Krauss PR and Renstrom PJ, 1995, Imprint of sub-25 nm vias and trenches in polymers, Appl. Phys. Lett., 67, 3114-6.
108. Roos N, Luxbacher T, Glinsner T, Pfeiffer K, Schulz H and Scheer H-C, 2001, Nanoimprint lithography with a commercial 4 inch bond system for hot embossing, Conf Emerging Lithographic Technologies V, (Santa Clara, CA, 27 Feb.-l Mar. 2001), Proc. SPIE 4343, 427-35.
109. Lebib A, Chen Y, Cambril E, Youinou P, Studer V, Natali M, Pepin A, Janssen H M and Sijbesma R P, 2002, Room-temperature and lowpressure nanoimprint lithography, Microelectron. Eng., 61-62, 371-7.
110. Malaquin L, Carcenac F, Vieu C and Mauzac M, 2002, Using polydimenthylsiloxane as a thermocurable resist for a soft imprint lithography process, Microelectron. Eng., 61-62, 379-84.
111. Roos N, Schulz H, Bendfeldt L, Fink M, Pfeiffer K and Scheer HC, 2002, First and second generation purely thermoset stamps for hot embossing, Microelectron. Eng., 61-62, 399-405.
112. Schift H, Heydermann LJ, Padeste C and Gobrecht J, 2002, Chemical nano-patteming using hot embossing lithography, Microelectron. Eng., 61-62, 423-8.
113. Both A, Bacher W, Heckele M, Miiller KD, Ruprecht R and Strohrmann M, 1995, Molding process with high alignment precision for the LIGA technology, Proc. Micro-Electro Mechanical Systems (Amsterdam, The Netherlands, 29 Jan-2 Feb.), pp 186-90, (IEEE Catalogue Number 95 CH35754).
114. Ehrhardt E, GehauBer T, Giousouf M, Kuck H, Mohr R and Warkentin D, 2002, Innovative concept for the fabrication of micromechanical sensor and actuator device using selectively metallized polymers. Sensors Actuators A, 97-98, 473-7.
115. Worgull M and Heckele M, 2003, New aspects of simulation in hot-embossing, Proc. DTIP (Cannes Madelieu, 5-7 May 2003).
116. Backer WR, Marshall ER, and Shaw MC, 1952, Trans. ASME, 74, p.61.
117. Taniguchi N, 1994, Precision Engineering, 16, 5-24.
118. Shaw MC, 1952, J. Franklin Inst., 254, 2, 109.
119. Heidenreich RO, Shockley W, 1948, Report on Strength of Solids, Phys. Soc. of London, 57.
120. Emst HJ, Merchant ME, 1941, Trans. Am. Soc. for Metals, 29, 299.
121. Merchant ME, 1945, J. Appl. Phys., 16, 267-275.
122. Piispanen V, 1937, Teknillinen Aikakaushehti (Finland), 27, 315.
123. Merchant ME, 1950, Machining Theory and Practice, Am Soc. for Metals, 5-44.
124. Merchant ME, 1945, J. Appl. Phys, 16, 318-324.
125. Barrett CS, 1943, Structure of Metals, McGraw Hill Co., NY, 295.
126. Bridgman PW, 1952, Studies in Large Plastic Flow and Fracture, McGraw Hill Co., NY.
127. Langford G, Cohen M, 1969, Trans. ASM, 62, 623.
128. V. Piispanen, 1948, J. Appl. Phys., 19, p.876.
129. Blazynski TZ, Cole J M, 1960, Proc. Instn. of Mech. Engrs., 1, 74, 757.
130. Shaw MC, 1950, J. Appl. Phys., 21, 599.
131. Walker TJ, 1967, PhD Dissertation, Carnegie-Mellon University, PA.
132. Walker TJ, Shaw M C, 1969, Advances in Machine Tool Design and Research, Pergamon Press, 241-252.
133. Usui E, Gujral A, Shaw MC 1960, Int. J. Mach Tools and Res., 1, 187- 197.
134. Vyas A, Shaw MC, 1999, Trans. ASME-J. Mech. Sc, 21, 1, 63-72.
135. Eugene F, 1952, Annals of CIRP, 52, 11, 13-17.
136. Shaw MC, 1980, Int. Jour. Mech. Sc, 22, 673-686.
137. Kwon KB, Cho DW, Lee SJ, Chu CN, 1999, Annals of CIRP, 47/1, 43-46.
138. Eyring H, Ree T, and Harai N, 1958, Proc. Nat. Acad. Scs., 44, 683.
139. Eyring H, Ree T, 1961, Proc. Nat. Acad. Scs., 47, 526-537.
140. Eyring H, Jhon MS, 1969, Significant Theory of Liquids, J. Wiley and Sons, NY.
141. Kececioglu D, 1958, Trans. ASME, 80, 149-168.
142. Kececioglu D, 1958, Trans. ASME, 80, 541-546.
143. Kececioglu D, 1960, Trans. ASME-J. Eng for Industry, 82, 79-86.
144. Anderson TL, 1991, Fracture Mechanics, CRC Press, Florida.
145. Zhang B, Bagchi A, 1994, Trans. ASME- J. of Eng for Industry, 116, 289.
146. Argon AS, Im J, Safoglu R, 1975, Metallurgical Transactions, 6A, 825.
147. Komanduri R, Brown RH, 1967, Metals and Materials, 95, 308.
148. Drucker DC, 1949, J. Appl. Phys., 20, 1.
149. Fleck NA, Muller GM, Ashby M F, Hutchinson J M, 1994, Acta Metallurgica et Materialia, 41, 10, 2855.
150. Stelmashenko NA, Walls M G, Brown L M, Milman Y V, 1993, Acta. Metallurgica et Materialia, 41, 10:, 2855.
151. Ma Q, Clarke D R, 1995, J. Materials Research, 46, 3, 477.
152. Nix WD, Gao H, 1998, J. Mech. and Physics of Solids, 1, 4, 853.
153. Gao H, Huang Y, Nix W D, Hutchinson J W, 1999, Jour, of Mechanics and Physics of Solids, 47, 1239.
154. Dinesh D, Swaminathan S, Chandrasekar S, and Farris T N, 2001, Proc ASME-IMECE, NY: 1-8.
155. Vogler M, DeVor R, Kapoor SG, 2001, Symposium on Modeling, Sensing and Controlling Micro Machining Processes, IMECE 2001, New York, USA.
156. Kim, CJ, 2001, Cutting Mechanics and Surface Generation in Micro Milling Processes, Ph. D. Thesis, University of Michigan.
157. Gong Y and Ehmann K, Symposium on Modeling, Sensing and Controlling Micro Machining Processes, IMECE 2001, New York, USA.
158. Gravesen P, Branebjerg J, and Jensen OS, 1993, Microfluidics - A Review, Journal of Micromechanics and Microengineering, 3, p.p. 168-182.
159. Kanjakar K, Cui J, and Jackson MJ, 2004, Design and Analysis of High-Speed Spindles For Nano-Machining Applications Using a Computational Fluid Dynamics Approach, Proceedings of the ASME South Eastern Region XI Technical Journal, 3, 1, p.p. 1.1 - 1.8.
160. Shaw MC, 1996, Metal Cutting Principles, Oxford Science Publications - Series on Advanced Manufacturing, Clarendon Press, University of Oxford, p.p. 18-46.
161. Bowden FP and Tabor D, 2001, The Friction & Lubrication Of Solids, Oxford Science Publications, Clarendon Press, University of Oxford, p.p. 168, 327.
162. Doyle ED, Home JG, and Tabor D, 1979, Frictional interactions between chip and rake face in continuous chip formation, Proc. Roy. Soc, of London, A366, 173-183.
163. Jawahir IS, and Zhang JP, 1995, An analysis of chip formation, chip curl and development, and chip breaking in orthogonal machining, Trans. North Amer. Manuf. Res. Inst. - Soc. Manuf. Eng., 23, 109 -114.
164. Kim CJ, Bono M, and Ni J, 2002, Experimental Analysis of chip formation in micro-milling, Trans. North Amer. Manuf. Res. Inst.- Soc. Manuf. Eng., 30, 247 - 254.
165. Komanduri R, Chandrasekaran N, and Raff LM, 2001, Molecular dynamics simulation of the nanometric cutting of silicon, Philosophical Magazine, B81, 1989-2019.
166. Luo X, Cheng K, Guo X, and Holt R 2003, An investigation into the mechanics of nanometric cutting and the development of its test bed, Int. J. Prod. Res., 41, 1449-1465.
167. McKeown PA, (1987), The Role of Precision Engineering in Manufacturing of the Future, Annals of the CIRP, 36(2), 495-501.
168. Taniguchi N, (1994), The State of the Art of Nanotechnology for Processing of Ultraprecision and Ultrafme Products, Precision Engineering, 16(1), 5-24.
169. Venkatesh VC, Chandrasekaran, H., (1987), Experimental Techniques in Metal Cutting, New Delhi: Prentice-Hall of India Ltd.
170. McKeown PA, (1995a), High Precision Manufacturing in an Advanced Industrial Economy, Nanyang Technological University, Singapore.
171. Yan J, Syoji K, Kuriyagawaa, T. and Suzuki, H., (2002a), Ductile Regime Turning At Large Tool Feed, Journal of Materials Processing Technology, 121, 363-372.
172. Schinker MG, (1991), Subsurface Damage Mechanisms at High- Speed Ductile Machining of Optical Glasses, Precision Engineering, 13(3), 208-218.
173. Komanduri R, (1996), On Material Removal Mechanisms in Finishing of Advanced Ceramics and Glasses, Annals of the CIRP, 45(1), 509-513.
174. Namba Y and Abe M, (1993) Ultraprecision Grinding of Optical Glasses to Produce Super-Smooth Surfaces, Annals of the CIRP, 42(1), 417-420.
175. Puttick KE, Rudman MR, Smith KJ, Franks A and Lindsay K, (1989), Single-point Diamond Machining of Glasses, Proc. Royal. Society. London., A426, 19-30.
176. Anon.(1998).[On-line] Available at http://www.predev.comy'smg/ specification.htm.
177. Anon.(1998). [On-line] Available at http://www.roymech.co.uk./Useful- Tables/ISO Tolerances/ISO-LIMITS.htm
178. Zhong Z and Venkatesh VC, (1995), Semi-Ductile Grinding and Polishing of Ophthalmic Aspherics and Spherics, Annals of the CIRP, 44(1), 339-342.
179. Morris JC, Callahan DL, Kulik J, Patten JA and Scattergood RO (1995). Origins of the Ductile Regime in Single-Point Diamond Turning of Semiconductors. Journal of the American Ceramic.Society. 78(8): 2015- 2020.
180. Ikawa N, Donaldson RR, Komanduri R, Konig W, Aachen TH, McKeown PA, Moriwaki T and Stowers IF, (1991), Ultraprecision Metal Cutting - The Past, the Present and the Future, Annals of the CIRP, 40(2), 587-594.
181. Fang FZ, Liu XD and Lee LC, (2003), Micro-Machining of Optical Glasses - A Review of Diamond-Cutting Glasses, SADHANA, 28(5), 945-955.
182. Namba T, Kobayashi H, Suzuki H and Yamashita K, (1999), Ultraprecision Surface Grinding of Chemical Vapor Deposited Silicon Carbide for X-Ray Mirrors using Resinoid-Bonded Diamond Wheels, Annals ofthe CIRP, 48(1), 277-280.
183. Ohmori H and Nakagawa T, (1995), Analysis of Mirror Surface Generation of Hard and Brittle Materials by ELID Grinding with Superfine Grain Metallic Bond Wheels, Annals of the CIRP. 44(1): 287-290.
184. Blake PN and Scattergood RO, (1990), Ductile Regime Machining of Germanium and Silicon, Journal of the American Ceramic. Society. 73(4): 949-957.
185. Blackley WS and Scattergood RO (1991). Ductile-Regime Machining Model for Diamond Turning of Brittle Materials. Precision Engineering. 13(2): 95-103.
186. Bifano TG, Dow TA and Scattergood RO (1991). Ductile-Regime Grinding: A New Technology for Machining Brittle Materials. Trans. ASME. Journal of Engineering for Industry.113: 184-189.
187. Lindberg RA (1970). Processes and Materials of Manufacture. New Delhi: Prentice Hall of India Ltd.
188. HMT Rao, (1980). Production Technology. New Delhi: Tata McGraw Hill Publishing Company Limited.
189. thedition, by Prentice Hall Inc, Upper Saddle River, NJ.
190. Rao PN (2000). Manufacturing Technology: Metal Cutting & Machine Tools. Tata New Delhi: McGraw-Hill Publishing Company Limited.
191. Cook NH (1966). Manufacturing Analysis. Addison-Wesley Publishing Co. Inc.
192. Pearce CA (1972). Silicon Chemistry and Applications. London: The Chemical Society.
193. Stephenson DA and Agapiou JS (1997). Metal Cutting Theory and Practice. New York : Marcel Dekker, Inc.
194. Anon. (1996a). Schott Optical Glass Properties. Pocket Catalogue.
195. Malkin S (1989). Grinding Technology : Theory and Application of Machining with Abrasives. England: Ellis Horwood Limited.
196. Savington D (2001). Maximizing the Grinding Process. SME technical paper. MROl-140: 1-12.
197. Subramaniam K and Ramanath P. (1991). Principles of Abrasive Machining. Ceramics and Glasses. Engineered Materials Handbook, 4, ASM International, The Materials Information Society, 316.
198. Hensz RR (1969). Glass Grinding and Polishing. SME Technical paper. MR69-230: 1-11.
199. Dunnington BW (1978). Diamonds for Abrasive Machining, Lapping, Polishing and Finishing. SME Technical Paper. MR78- 955:1-8.
200. Bhateja C, Lindsay R, Grinding theory and techniques and troubleshooting, published by Society of Manufacturing Engineers, 1982 Dearborn, MI.
201. rdedition. John Wiley & Sons.
202. Xu X, Yu Y and Huang, H (2003). Mechanisms of Abrasive Wear in the Grinding of Titanium (TC4) and Nickel (K417) Alloys. Wear. 255: 1421-1426.
203. Holz R and Sauren J (1988). Grinding with Diamond and CBN. WINTER Diamond and CBN Tools Catalogue. Ernst Winter & Sohn Diamantwerkzeuge GmbH & Co.
204. thedition, Prentice Hall, Inc. NJ.
205. Inasaki I, Tonshoff HK and Howes TD (1993). Abrasive Machining in the Future. Annals of the CIRP. 42(2): 723-732.
206. Aurich JC, Braun O and Wemecke G (2003). Development of a Superabrasive Grinding Wheel with Defined Grain Structure using Kinematic Simulation. Annals of the CIRP. 52(1): 275-280.
207. Anon. (2002). Tech Front: Defining Grinding Grains. Manufacturing Engineering. 6:24.
208. Shaw MC (1984). Metal Cutting Principles. Oxford University Press, NY, 1984.
209. Anon (2002a). Noritake diamond grinding catalogue.
210. Anon.(2005). [On-line] Available at http://www.zsniec.net/product3-1.htm.
211. Boothroyd G (1981). Fundamentals of Metal Machining and Machine Tools. International Student Edition. Tokyo: McGraw-Hill International Book Company.
212. rdedition. McGraw-Hill Book Company, NY.
213. Anon. (1995a). Diamond Tools and CBN Tools for Internal Grinding Catalogue. Ernst Winter & Sohn Diamantwerkzeuge GmbH & Co., Germany.
214. Anon. (1995b). Material Removal, Industrial Tooling Catalogue. Greenfield Industries, USA.
215. Anon. (2004). http://www.schott.com/english/news/pictures.html.
216. Anon. (2001). Tools & Industrial Supplies. Cromwell-Tools Catalogue.
217. Subramanian K and Tricard M (1995). Future Directions for the Grinding of Ceramics. Supergrind'95 - Grinding and Polishing with Superabrasives, CT: 5-31.
218. Krar, Ratterman (1990) Superabrasives: Grinding and machining with CBN and Diamond, Glencoe/McGraw-Hill, USA.
219. thEdition, Macmillan Publishing Company, New York.
220. Metzger JL, Superabrasive grinding, Butterworth and Co. Ltd., 1986.
221. Dallas DB, (2000) Tools and Manufacturing Engineering Handbook, SME, USA.
222. Moore WR, Foundations of Mechanical Accuracy, 800 Union Avenue, Bridgeport CT 06607, 1974.
223. Venkatesh VC, and Izman S, 2003, Application for Malaysian Patent for invention of novel diamond wheel filed on 30th January 2003. No. PI 20030326.
224. Lindburg RA Processes and materials of manufacture, Allyn and Bacow Inc, Boston, 1964, p859.
225. Venkatesh VC, S Izman 2003. Ductile streaks in precision grinding of hard and brittle materials, Sadhana, 28, 5, October 2003, 915-924.
226. Lindburg RA, Lecture at Ford Foundation Summer School, PSG college of Technology, Coimbatore, India, June 1965.
227. Venkatesh VC, and Izman S, Konneh M, Ultraprecision and high precision tuming and grinding of brittle materials. Universiti Teknology Malaysia.
228. Mon TT, 2003, Chemical mechanical polishing of optical glass subjected to partial ductile grinding, M.Eng. Thesis, Universiti Teknologi Malaysia.
229. Ohmori H and Nakagawa T (1990). Mirror Surface Grinding of Silicon Wafers with Electrolytic In-Process Dressing. Annals of the CIRP. 39(1): 329-332.
230. Rahman M, Senthil Kumar S, Lim HS, Fatima K (2003) Nano finish grinding of brittle materials using electrolytic in-process dressing (ELID) technique, Sadhana, 28, (5) 957-974.
231. Bandyopadhyay BP, Ohmori H and Takahashi I. (1997). Efficient and Stable Grinding of Ceramics by Electrolytic In-Dressing (ELID). Journal of Materials Processing Technology. 66: 18-24.
232. Itoh N and Ohmori H (1996). Grinding Characteristics of Hard and Brittle Materials by Fine Grain Lapping Wheels with ELID. Journal of Materials Processing Technology. 62: 315-320.
233. Qian J, Ohmori, H and Lin W (2001). Internal Mirror Grinding with a Metal/Metal-Resin Bonded Abrasive Wheel. International Journal of Machine Tools & Manufacture. 41:193-208.
234. Murata R, Okano K and Tsutsumi C (1985). Grinding of Structural Ceramics. Milton C. Shaw ASME Grinding Symposium PED. 16:261- 272.
235. Zhang C, Ohmori H and Li W (2000). Small-Hole Machining of Ceramic Material with Electrolytic Interval-Dressing (ELID-II) Grinding. Journal of Material Processing Technology. 105: 284-293.
236. Chen H, Li J, Spence J and Li JCM (2000). An ELID-cutting saw. Journal of Materials Processing Technology. 102: 208-214.
237. Jeff Ruckman, A Tutorial on Deterministic Microgrinding News letter of Center for Optics Manufacturing Convergence Vol 7 number 6, Nov/Dec 1999.
238. Kapoor A (1993). A Study on Mechanism of Aspheric Grinding of Silicon. Tennessee Technological University, USA: M.Sc. Thesis.
239. Tan CP (1990). Aspheric Surface Grinding and Polishing of Thermal Imaging Materials. Tennessee Technological University, Cookville, USA: M.Sc. Thesis.
240. Rusell RG (1993) Comparison of metal and resinoid bonded grinding wheels with various grit sizes in the aspheric surface generation of silicon lenses. Tennessee Technological University, USA: M.Sc. Thesis.
241. Zhong Z and Venkatesh VC (1995). Semi-Ductile Grinding and Polishing of Ophthalmic Aspherics and Spherics. Annals of the CIRP. 44(1): 339-342.
242. Darryl Meister July 1998, Lens Talk, Sola technical marketing Vol 26 No 25.
243. ndedition. Bristol: Adam Hilger Ltd.
244. Van Ligten RF and Venkatesh VC (1985). Diamond Grinding of Aspheric Surfaces on a CNC 4-Axis Machining Center. Annals of the CIRP. 34(1): 295-298.
245. Anon.(2005). [On-line] Available at http://www.hkpc.Org/optics/polishing. html#advancedgrinding.
246. Fang FZ and Chen LJ (2000). Ultra-Precision Cutting of ZKN7 Glass. Annals of the CIRP.49(1): 17-20.
247. Namba Y, Wada R, Unno K, Tsuboi A (1989). Ultra-precision Surface Grinder Having a Glass-Ceramic Spindle of Zero-Thermal Expansion. Annals of the CIRP. 38(1):331-334.
248. Venkatesh VC (1999). Diamonds in Manufacturing, SME Student Chapter (UTM) Year Book 1999.
249. Chapman G (2003). Enabling Technologies for Ultra-Precision Manufacturing & Metrology. Presented on 18 January 2003 at the Faculty of Mechanical Engineering, Universiti Teknologi Malaysia.
250. Schulz H, and Moriwaki T (1992). High-speed Machining. Annals ofthe CIRP. 41(2): 637-643.
251. Komanduri R, Lucca DA and Tani Y (1997). Technological Advances in Fine Abrasive Processes. Annals ofthe CIRP. 46(2): 545-596.
252. Momochi T, Masahide K, Limura Y, One day Toshiba seminar, Kolej Universiti Teknologi Kebangsaan Malaysia, High-Speed High precision machining 2002.
253. Precitech catalogue (2000).
254. Ong NS, Venkatesh VC Semi ductile grinding and polishing of Pyrex glass. Journal of Materials Processing Technology 83 (1996) 261- 266.
255. Moore catalogue (2000).
256. McKeown PA, Carlisle K, Shore P and Read, R.F.J. (1990). Ultraprecision, High Stiffness, CNC Grinding Machines for Ductile Mode Grinding of Brittle Materials, Infrared Technology and Applications. SPIE 1320: 301-313.
257. Jackson MJ, Hyde LJ, Modal analysis of tetrahedral machine tool structure, ICAMT 2004, Kuala Lumpur 11-13 May 2004 pp. 394-400.
258. Venkatesh VC, Izman S, Bauer E, Oles E, Mon TT, M. Konneh, Failure analysis of IC chip using novel technique, ICAMT 2004, Kuala Lumpur 11-13 May 2004 pp. 294-299.
259. Woon KS, 2003, Binderless grinding wheel for failure analysis of silicon die on IC chips, B.Eng Thesis, Universiti Teknologi Malaysia.
260. Tang KF, 2003, Novel grinding process for failure analysis of IC chip packaging, B.Eng Thesis, Universiti Teknologi Malaysia.
261. Spear KE and Dismukes JP, in Synthetic Diamond: Emerging CVD Science and Technology, The Electrochemical Society, John Wiley and Sons Inc., New York, 1994.
262. Wentorf RH, J. Phys. Chem., 69 (1965) 3063.
263. Butler JE and Woodin RL, Phil. Trans. R. Soc. Lond., A342 (1993) 209.
264. Ashfold MNR, May PW, Rego CA and Everitt NM, Chem. Soc. Rev., 23 (1994) 21.
265. Bachmann PK and Messier R, Chem. Eng. News, 67 (1989) 24.
266. Spear KE, J. Am. Ceram. Sci., 72 (1989) 171.
267. Joffreau PO, Haubner R and Lux B, Mater. Res. Soc. Proc, EA-15(1988) 15.
268. Spitsyn BV, Bouilov LL and Deryagin BV, J. Cryst. Growth, 52(1981)219.
269. Angus JC, Electrochem. Soc. Proc, 89 (1989) 1.
270. Yarbrough WA and Messier R, Science, 247 (1996) 688.
271. Messier R, Badzian AR, Badzian T, Spear KE, Bachmann PK and Roy R, Thin Solid Films, 153 (1987) 1.
272. Angus JC and Hayman CC, Science, 241 (1988) 913.
273. Spear KE, Am J, Ceram. Soc, 72 (1989) 171.
274. Kamo M, Sato U, Matsumoto S and Setaka N, Cryst J. Growth, 62 (1983) 642.
275. Saito Y, Matsuda S and Nagita S, Mater J. Sci. Lett., 5 (1986) 565.
276. Saito Y, Sato K, Tanaka H and Miyadera H, Mater J. Sci., 24 (1989)293.
277. Williams BE, Glass JT, Davis RF, Kobashi K and Horiuchi T, Vac J Sci. Technol. A, Vac. Surf. Films, 6 (1988) 1819.
278. Kobashi K, Nishimura K, Kawate Y and Horiuchi T, Vac J Sci. Technol. A, Vac. Surf. Films, 6 (1988) 1816.
279. Liou Y, Inspector A, Weimer R and Messier R, Appl. Phys. Lett., 55 (1989) 631.
280. Zhu W, Randale CA, Badzian AR and Messier R, Vac J. Sci. Technol. A, Vac. Surface Films, 7 (1989) 2315.
281. Matsumoto S, Mater J. Sci. Lett., 4 (1985) 600.
282. Matsumoto S, Hino M and Kobayashi T, Appl. Phys. Lett., 51(1987)737.
283. Vitkayage DJ, Rudder RA, Fountain GG and Markunas RJ, Vac J. Sci. Technol, A6 (1988) 1812.
284. Meyer DE, lanno NJ, Woolam JA, Swartzlander AB and Nelson AJ, Mater J. Res., 3 (1988) 1397.
285. Wood P, Wydeyen T and Tsuji O, in Programs and Abstracts of the First International Conference on New Diamond Science and Technology, New Diamond Forum, Tokyo, Japan, 1988.
286. Jackman RB, Beckman J and Foord JS, Appl. Phys. Lett., 66 (1995)1018.
287. Suzuki K, Sawabe A, Yasuda H and Inuzuka T, Appl. Phys. Lett, 50 (1987) 728.
288. Akatsuka F, Hirose Y and Kamaki K, Jap. J. Appl. Phys., 27 (1988)L1600.
289. Suzuki K, Sawabe A and Inuzuka T, Jap. J. Appl. Phys., 29 (1990) 153.
290. Niu CM, Tsagaropoulos, Baglio J, Dwight K and Wold A, J. Solid State Chem., 91 (1991) 47.
291. Popovici G, Chao CH, Prelas MA, Charlson EJ and Meese JM, Mater J. Res., 10 (1995) 2011.
292. Chao CH, Popovici G, Charlson EJ, Charlson EM, Meese JM and Prelas MA, J. Cryst. Growth, 140 (1994) 454.
293. Postek MT, Howard KS, Johnson AH and Macmichael KL, in Scanning Electron Microscopy, 1980.
294. Spirsyn BV, Bouilov LL and Deryagin BV, J. Cryst. Growth, 52(1981)219.
295. Kobashi K, Nishimura K, Kawate Y and Horiuchi T, Phys. Rev. B, 38 (1988) 4067.
296. Pickrell D, Zhu W, Badzian AR, Messier R and Newnham RE, Mater J. Res., 6 (1991) 1264.
297. Oatley CW, in Scanning Electron Microscope, Cambridge University Press, 1972.
298. Tobin MC, in Laser Raman Spectroscopy, Wiley Interscience, New York, 1971.
299. Colthup NB, Daley LH and Wiberley SE, in Introduction to Infrared and Raman Spectroscopy, Academic Press, New York, 1975.
300. Raman CV and Krishnan KS, Nature, 121 (1928) 501.
301. Nemanich RJ, Glass JT, Lucovsky G and Shroder RE, Vac J. Sci. Tech., 6 (1988)1783.
302. Knight DS and White WB, Mater J. Res., 4 (1989) 385.
303. Solin SA and Ramdas AK, Phys. Rev. B, 1 (1970) 1687.
304. Leyendecker T, Lemmer O, Jurgens A, Esser S and Ebberink J, Surf. CoatTechnol, 48 (1991) 253.
305. Murakawa M and Takeuchi S, Surf. Coat. Technol, 49 (1991)359.
306. Yaskiki T, Nakamura T, Fujimori N and Nakai T, Surf. Coat. Technol, 52(1992)81.
307. Reineck J, Soderbery S, Eckholm P and Westergren K, Surf. Coat. Technol, 5(1993)47.
308. Wang HZ, Song RH and Tang SP, Diamond and Relat. Mater, 2 (1993) 304.
309. Inspector A, Bauer CE and Oles EJ, Surf. Coat. Technol, 68/69(1994)359.
310. Kanda K, Takehana S, Yoshida S, Watanabe R, Takano S, Ando H and Shimakura F; Surf. Coat. Technol, 73 (1995) 115.
311. Luz B and Haubner R, in Diamond and Diamond-like films and coatings, NATO-ISI Series B, Physics, 266, Edited by R. E. Clausing, 579, L. L. Horton, J. C Angus, and P. Koidl, Plenum Press, NY, 1991.
312. Chen X and Narayan J, Journal of Applied Physics, 74, (1993), 1468.
313. Klass W, Haubner R, and Lux B, Diamond and Related Materials, 6, (1997), 240.
314. Zhu W, Yang PC, Glass JT, and Arezzo F, Journal of Materials Research, 10, (1995), 1455.
315. Lux B and Haubner R, Ceramics International, 22, (1996), 347.
316. C.R.C. Handbook of Chemistry and Physics, Edited by R. C. Weast, C.R.C. Press, FL, 1989-1990.
317. Haubner R, Lindlbauer A, and Lux B, Diamond and Related Materials, 2, (1993), 1505. 72.
318. Chang CP, Flamm DL, Ibbotson DE, and Mucha JA, J. Appl.Phys., 63 (1988) 1744.
319. Gusev MB, Babaey VG, Khvostov VV, Lopez-Ludena GM, Yu Brebadze A, Koyashin lY, and Alexanko AE, Diamond and Related Materials, 6(1997), 89-94.
320. Endler I, Barsch K, Leonhardt A, Scheibe HJ, Ziegele H, Fuchs I, and Raatz C, Diamond and Related Materials, 8, (1999), 834-839.
321. Kamiya S, Takahashi H, Polini R and Traversa E, Diamond and Relat. Mater, 9 (2000) 191-194.
322. Inspector A, Oles EJ and Bauer CE, Int.J.Refract; Metal Hard Materials, 15 (1997) 49.
323. Itoh H, Osaki T, Iwahara H and Sakamoto H, J. Materials Science, 26 (1991) 370.
324. Liu H and Dandy DS; Diamond Chemical Vapor Deposition, Noyes, 1996.
325. Nazare MH and Neves AJ: Properties, Growth and Application of Diamond, 1998.
326. Zhang GF and Buck V, Surf. Coat. Technol, 132 (2000) 256.
327. Haubner R, Kubelka S, Lux B, Griesser M and Grasserbauer M, J. Physics.4* Coll, C5, 5 (1995) 753.
328. May P, Rego C, Thomas R, Ashfold MN and Rosser KN, Diamond and Related Materials, 3 (1994) 810.
329. Gouzman I and Hoffmann A, Diamond and Related Materials, 7(1998) 209.
330. Wang W, Liao K, Wang J, Fang L, Ding P, Esteve J, Polo MC and Sanchez G, Diamond and Related Materials, 8 (1999)123.
331. Wang BB, Wang W and Liao K, Diamond and Related Materials, 10 (2001) 1622.
332. Kim YK, Han YS and Lee JY. Diamond and Related Materials, 7 (1998) 96.
333. Wang WL, Liao KJ and Gao GC, Surf. Coat. Technol, 126 (2000) 195.
334. M.C Polo, W.Wang, G.Sanshez, J.Andujar and J.Esteve, Diamond and Related Materials, 6 (1997) 579.
335. Kamiya S, Yoshida N, Tamura Y, Saka M and Abe H, Surf. Coat. Technol, 142-144 (2001) 738.
336. Sein H, Ahmed W, Rego CA, Jones AN, Amar M, Jackson M J, Polini R, J. Phys: Condes. Matter, 15, (2003), S2961- S2967.
337. May PW, Rego CA, Thomas RM, Ashford MNR and Rosser KN, Diamond and Related Materials, 3(1994) 810-813.
338. Amirhaghi S, Reehal HS, Plappert E, Bajic Z, Wood RJK, Wheeler DW, Diamond and Related Materials, 8 (1999) 845- 849.
339. Jackson M J, Gill MDH, Ahmed W, Sein H, Proceedings of the Institute of Mechanical Engineers - (Part L): J. Materials, 217, (2003), 77-83.
340. Sein H, Jackson M J, Ahmed W, Rego CA, New Diamond and Frontier Carbon Technology, 12, (6) (2000), 1-10.
341. Sein H, Ahmed W, Jackson M J, Woodwards R and Polini R, Thin Solid Films, 447-448 (2004), 455-461.
342. Steen WM, Laser Materials Processing, Second Edition, Springer, New York, 1998.
343. McGeough JA, Micromachining of Engineering Materials, Marcel Dekker, New York, 2002.
344. Jackson MJ, Gill MDH, Khan AH, and O'Neill W, Evaluation of Supersonic Nozzle Designs for Laser Micro- Machining of High Speed Steels, Transactions of S.M.E. - Journal of Manufacturing Processes, (2002), 4, 42-51.
345. Jackson MJ, Robinson GM, Khan AH, Gill MDH, Mills B, and O'Neill W, Micromachining of High Chromium Content Steel Under Controlled Gas Atmospheres, Transactions of S.M.E. - Journal of Manufacturing Processes (2003), 5, 106-117.
346. Jackson MJ, Robinson GM, Mills B, and O'Neill W, Laser Micro-Machining of Chromium Rich Die Steel Under Controlled Atmospheres, Proceedings of the Institution of Mechanical Engineers (London): Part B - Journal of Engineering Manufacture (2003), 217, 553-562.
347. McClelland J J, et alia., Laser-focused Atomic Deposition, Science (1993), 262, p.87.
348. Gupta R, McClelland J, Cellotta R, Nanofabrication of a Two-Dimensional Array Using Laser-focused Atomic Deposition, Appl. Phys. Lett. (1995), 67, p.3718.
349. Meschede D and Metcalf H, Atomic Nanofabrication: Atomic Deposition and Lithography Using laser and Magnetic Forces, J. Phys. D.:Appl. Phys., (2003), 36, R17-R38.
350. Stix G, Hands of Light, Scientific American, August 2003, p.p. 30-31.
351. Chichkov BN, Momma C, Nolte F, von Albensleben A, and Tubbermann A, Applied Physics (1996) A63, 109- 115.
352. Hashish M, and Hilleke M., (1999), Water Drop Machining of Composites and Ceramics, in Machining of Ceramics and Composites, Chapter 13, p.p. 427-482, Marcel Dekker, New York.
353. Jackson MJ and Field JE, (2000) Fracture Thresholds Modelling Liquid Impact in Brittle Materials, Journal of the Institute of Materials, Minerals, and Mining - British Ceramic Transactions, 99, 1- 13.
354. Bowden FP and Brunton JH (1961), The deformation of solids by liquid impact at supersonic speeds, Proc. Roy. Soc. Lond., A263, 433-450.
355. Steverding B, and Lehnigk SH, (1969), Dynamic thresholds for crack propagation, Int. J. Fract. Mech., 5, 369-370.
356. Miller GF, and Pursey H, (1956), On the partition of energy between elastic waves in a semi-infinite solid, Proc. Roy. Soc. Lond., A233, 55-69.
357. Jackson MJ, and Field JE, (1999), Liquid impact erosion of single- crystal magnesium oxide, Wear, 233-235, 39-50.
358. Obara T, Bourne NK, and Field JE (1995), Liquid drop impact on liquid and solid surfaces, Wear, 186-187, 338-344.
359. Hartranft RJ, and Sih GC (1973): in Methods of analysis and Solutions of crack problems (ed. G.C. Sih), 179-238, Noordhoff International Publishing.
360. Kolsky H (1953), "Stress waves in solids", Clarendon Press, Oxford, England.
361. Lord Rayleigh (1885), On waves propagated along the plane surface of an elastic solid, Proc. Lond. Math. Soc, 17, 4-11.
362. Swain MV, and Hagan JT (1980), Rayleigh wave interaction with, and the extension of, microcracks, J. Mat. Sci., 15, 387-404.
363. Freund LB (1972), J. Mech. Phys. Solids, 20, 129-140.
364. Broberg KB (1960), The propagation of a brittle crack, Arkiv. Fur Fysik., 18, 159-192.
365. Kerkhoff F, and Richter H (1969): in 2nd Int. Conf. "Fracture", 463-473, Brighton, England.
366. Dulaney EN, and Brace WF (1960), J. Appl. Phys., 31, 2233- 2236.
367. Berry JP (1960), J. Mech. Phys. Solids, 8, 194-216.
368. Roberts DK, and Wells AA (1954), Engineering, 178, 820-821.
369. Evans AG, in "Treatise on Materials Science and Technology", Erosion (ed. CM. Preece), 1979, 16, 1-67, Academic Press, New York.
370. Sih GC: "Handbook of stress intensity factors", 1973, Lehigh University Press, Pennsylvania, U.S.A.
371. Hand RJ, Field JE, and Townsend D, (1991), The use of liquid water drops to simulate angled drop impact, J. Appl. Phys., 70, 7111-7118.
372. Inman DJ, Engineering Vibration Prentice Hall, Upper Saddle River, New Jersey, 2001.
373. Cook RD, Finite Element Modeling For Stress Analysis John Wiley & Sons Inc., New York, 1995.
374. Zhao Q, Dong S, and Sun T (2001) Research on diamond tip wear mechanism in atomic force microscope-based micro-and nanomachining, High Technology Letters, 7, (3), 84-89.
375. Ahao QL, Dong S, and Sun T (2001) Investigation of an atomic force microscope diamond tip wear in micro-and nanomachining, Key Engineering Materials, 202-203, 315-350.
376. Jackson M J (2001) Vitrification heat treatment during the manufacture of corundum grinding wheels, Journal of Manufacturing Processes, 3, 17-28.
377. rdEdition - International Student Edition, McGraw-Hill Kogakusha Ltd., p.p. 109-113, and p.p. 139-144.
378. Loladze TN (1967) Requirements of tool materials, Proceedings of the 8th International Machine Tool Design and Research Conference, Pergamon Press, 821- 842.
379. Lundin ST, Studies on Triaxial Whiteware Bodies, (Almqvist and Wiksell), Stockholm, Sweden, 1959.
380. Storch W, Ruf H, and Scholze H, Berichte Deut. Keram. Ges., 1984, 61, 325.
381. Binns E, Science of Ceramics, 1962, 1, 315.
382. Ford WF, and White J, Trans. J. Brit. Ceram. Soc, 1951, 50, 461.
383. Kirchoff G, Pompe W, and Bahr HA, J. Mat. Sci., 1982, 17, 2809.
384. Jackson MJ, and Mills B, Dissolution of Quartz in Vitrified Ceramic Materials, J. Mat. Sci., 1997, 32, 5295 - 5304.
385. Alexander IE, and Klug HP, X-ray diffraction procedures, Anal. Chem., 1948, 20, 886.
386. Khandelwal SK, and Cook RL, Effect of alumina additions on crystalline constituents and fired properties of electrical porcelain, Amer. Ceram. Soc. Bull., 1970, 49, 522-526.
387. Jander W, Reaktion im festen zustande bei hoheren temperaturen (Reactions in solids at high temperature), Z. Anorg. U. Allgem. Chem., 1927, 163, 1-30.
388. Krause P, and Keetman E, Zur kenntnis der keramischen brennvorgange (On combustion processes in ceramics), Sprechsaal, 1936, 69, 45-47.
389. Monshi A, Investigation into the strength of whiteware bodies, Ph. D. Thesis, University of Sheffield, United Kingdom, 1990.
390. Jackson MJ, A study of vitreous-bonded abrasive materials, Ph. D. Thesis, Liverpool John Moores University, United Kingdom, December 1995.
391. M. J. Jackson, G. M. Robinson, N. Dahotre, A. Khangar, and R. Moss, Laser Dressing of Vitrified Aluminium Oxide Grinding Wheels, British Ceramic Transactions, 2003, 102, 237-245.
392. A. Khangar and N. Dahotre, Morphological Modification in Laser- Dressed Grinding Wheel Material For Microscale Grinding, Journal of Materials Processing Technology, 2005, 170, 1-10.
393. A. Khangar, N. B. Dahotre, M. J. Jackson, G. M. Robinson, Laser Dressing of Alumina Grinding Wheels, Proceedings of the International Surface Engineering Congress and Exposition, 2003, ASM International, p.p. 423-426.
394. D. J. Dingley and V. Randle, J. Mat. Sci., 1992, 27, 4585.
395. D. Triantafyllidis, L. Li, F. H. Stott, Surface Treatment of Alumina-based Ceramic Using Combined Laser Sources, Appl. Surf. Sci., 2002, 186, 140-144.
396. J. Lawrence, L. Li, J. T. Spencer, The Effects of High Power Laser Diode Laser Radiation on the Wettability, Adhesion, and Bonding Characteristics of an Alumina-Silica Based Oxide and Vitreous Enamel, Surface and Coatings Technology, 1999, 115, 273-281.
397. Y. Yuanzheng, Z. Youlan, L. Zhengyi, C. Yuzhi, Laser Remelting of Plasma Sprayed Alumina Ceramic Coatings and Subsequent Wear Resistance, Mater. Sci. and Engg., 2000, A291, 168-172.
398. L. Bradley, L. Li, F. H. Stott, Flame Assisted Laser Surface Treatment of Refractory Materials for Crack Free Densification, Mater. Sci. and Engg., 2000, A278, 204-212.
399. W. Kurz, R. Trivedi, Trans. ASME, 1992, 114, 450.
400. A. Kar, J. Mazumdar, J. Appl. Phys., 1987, 61, 2645.
401. M. Rappaz, S. David, J. M. Vitek, L. A. Boatner, Metall. Trans. A, 1989, 20A, 1125.
402. D. J. Dingley, D.P. Field, Mater. Sci. and Technology, 1996, 12, 1-9.
403. D. P. Field, Ultramicroscopy, 1997, 67, 1-9.
404. B. K. Kim, J. A. Szpunar, Scripta. Met, 2001, 44, 2605.
405. J. Farrer, J. Michael, C. Carter, in Electron Backscatter Diffraction in Materials Science, Kluwer Academic Publishers, New York, 2000, p.299.
406. K. Z. Baba-Kishi, J. Mater. Sci, 2002, 37, 1715.
407. J. Mazumdar, W. M. Steen, J. Appl. Phys, 1980, 51, 941-947.
408. M. C. Fleming, Solidification Processing, McGraw-Hill, New York, 1974.
409. O. Esquivel, J. Mazumdar, M. Bass, S. M. Copeley, Microstructural Formation According to the Theory of Constitutional Supercooling, in Rapid Solidification Processing, Processing and Technologies II, Claitors, Baton Rouge, 1980, p.p. 150-173.
410. L. Bradley, L. Li, F. Stott, Appl. Surf. Sci, 1998, 138-139, 522-528.
411. S. Z. Lee, K. H. Ghar, Mat. Wiss. Wekstofftech, 1992, 23, 117-123.
412. J. Shieh, S. Wu, Appl. Phys. Lett, 1991, 59, 1512-1514.
413. D. Rosenthal, Welding J. Supplement, 1941, 20, 220-234.
414. D. Rosenthal, Trans. ASME, 1946, 68, 849.
415. H. Carslaw and J. C. Jaeger, Conduction of Heat in Solids, Clarendon Press, Oxford, 1962.
416. S. Kou, R. Mehrabian, in Modelling of Casting and Welding Processes III, The Metals and Minerals Society, TMS, Warrendale, PA, 1986.
417. D. Bauerle, Laser Processing and Chemistry, 3rd Edition, Springer- Verlag, Berlin, Germany, 2000, p.p. 168-176.
418. Committee on Technology National Science and Technology Council, "National Nanotechnology initiative: Leading to the next industrial revolution, Washington D. C. 2000.
419. Snowdon K, Mcneil C, Lakey J. Nanotechnology for MEMS components. mstNews 2001; (3): 9-10.
420. EI-Fatatry A, Correial A. Nanotechnology in Microsystems: potential influence for transmission systems and related applications. mstNews 2003; (3): 25-26.
421. Werner M, Kohler T, Griinwald W. Nanotechnology for applications in microsystems. mstNews 2001; (3): 4-7.
422. El-Hofy H, Khairy A, Masuzawa T, McGeough J. Introduction. In: McGeough J eds. Micromachining of Engineering Materials. New York: Marcel Dekker, 2002.
423. Donaldson R, Syn C, Taylor J, Ikawa N, Shimada S. Minimum thickness of cut in diamond tuming of electroplated copper. UCRL-97606 1987.
424. Stephenson DJ, Veselovac D, Manley S, Corbett J. Ultra-precision grinding of hard steels. Precision Engineering 2001; 15: 336-345.
425. Rubenach O. Micro technology - Applications and trends. Euspen online training lecture. http://www.euspen.org/training/lectures/course2free2view/ 02MicroTechApps/demolecture.asp (accessed July 2006).
426. Diamond milling processes for the generation of complex optical mold inserts, http://www.lfm.uni-bremen.de/html/res/res001/resl08.html(accessed July 2006).
427. Week M. Ultraprecision maehining of microcomponents. Machine Tools 2000; 113-122.
428. Andreas Schutze, Lutz-Giinter John. Nano sensors and micro integration. mstNews 2003; 3: 43-45.
429. Ayman EI-Fatatry, Antonio Correial. Nanotechnology in Microsystems: potential influence for transmission systems and related applications. mstNews 2003; 3: 25.
430. Ikawa N, Donaldson R, Komanduri R, Konig W, Mckeown PA, Moriwaki T, Stowers I. Ultraprecision metal cutting - The past, the present and the future. Annals of the CIRP 1991; 40(2): 587-594.
431. Shaw MC. Principles of Abrasive Processing. New York: Oxford University Press, 1996.
432. Komanduri R, Chandrasekaran, Raff L. Effects of tool geometry in nanometric cutting: A molecular dynamics simulation approach. Wear 1998; 219: 84-97.
433. Luo X. Cheng K, Guo X, Holt R. An investigation on the mechanics of nanometric cutting and the development of its test-bed. International Journal of Production Research 2003; 41 (7): 1449-1465.
434. Taniguchi N. Nanotechnology. New York: Oxford University Press, 1996.
435. Dow T, Miller E, Garrard K. Tool force and deflection compensation for small milling tools. Precision Engineering 2004; 28 (1): 31-45.
436. Cheng K, Luo X, Ward R, Holt R. Modelling and simulation of the tool wear in nanometric cutting. Wear 2003; 255: 1427-1432.
437. Shimada S. Molecular dynamics simulation of the atomic processes in microcutting. In McGeough J, eds. Micromachining of Engineering Materials. New York: Marcel Dekker, 2002: 63-84.
438. Nakazawa H. Principles of Precision Engineering. New York: Oxford University Press, 1994.
439. Lee W, Cheung C. A dynamic surface topography model for the prediction of nano-surface generation in ultra-precision machining. International Journal of Mechanical Sciences 2001; 43: 961-991.
440. Corbett J. Diamond micromachining. In McGeough J, eds. Micromachining of Engineering Materials. New York: Marcel Dekker, 2002: 125-146.
441. Bifano TG, Dow TA, Scattergood RO. Ductile-regime grinding: A new technology for machin ing brittle materials. Transactions of ASME: Journal of Engineering for Industry 1991; 113: 184-189.
442. Slocum AH. Precision Machine Design. Englewood Cliffs: Prentice- Hall 1992.
443. Schellekens P, Rosielle N. Design for precision: current status and trends. Annals of the CIRP 1998; 47(2): 557-584.
444. Shinno H, Hashizume H, Ito Y, Sato C. Structural configuration and performances of machining environment-controlled ultraprcision diamond turning machine 'capsule'. Annals of the CIRP 1992; 41(1): 425- 428.
445. Stanev P, Wardle F, Corbett J. Grooved hybrid air bearings. http://www.loadpoint.co.uk/site2/grooved.pdf (accessed July 2006).
446. Leifheim B. Precision and ultra precision machine tools. Euspen online lecture. http://www.euspen.org/training/lectures/course2free2view/ 03PrecisionUltraTool/demolecture.asp(accessed July 2006).
447. http://www.contour~diamonds.com/(accessed on April 2006).
448. Chen M, Li D, Dong S, Zhang F. Factors influencing the surface quality during ultra-precision grinding of brittle materials in ductile mode. Key Engineering Materials 2003; 257-258.
449. Corbett J, Mckeown P, Peggs G, Whatmore R. Nanotechnology: international developments and emerging products. Annals of the CIRP 2000; 49(2): 1-23.
450. Cheng K, Luo X, Ward R, Liu X, Modelling and control of the surface integrity and functionality in precision machining. Proceedings of the 3rd euspen International Conference, Eindhoven Holland, May 26-30 2002, pp. 221-224.
451. NanoTest System brochure, L.O.T. Orient Ltd.
452. http://www-eng.llnLgov/lodtni/successjpg2.html (accessed on July 2006).
453. http://www.fanuc.CQ.jp/en/product/robQnano/index.htm (accessed on July 2006).
454. http://www.opticsexcellence.org/index.htm (accessed on July 2006).
455. Jo B et al., J. Microelectromechanical Systems, 9, p.p. 7 6 - 8 1, 2000.
456. Narasimhan J and Papautsky I, J. Micromech. Microengg., 12, p.p. 96-103, 2004.
457. Becker H and Gamer C, Electrophoresis, 21, p.p. 12 - 26, 2000.
458. Tseng A, J. Micromech. Microengg., 12, p.p. R15-R34, 2004.
459. Xia Y and Whitesides GM, Angew. Chem. Int., 37, p.p. 550 - 575, 1998.
460. Love JC, Anderson JR, and Whitesides GM, MRS Bulletin, 26, p.p. 523-528, July 2001.
461. Huck W, Int. J. of Nanotechnology, 1, p.p. 119 - 129, 2004.
462. Hamley IW, Nanotechnology, 12, p.p. R39-R54, 2003.
463. Chou SY, MRS Bulletin, 26, p.p. 512 - 517, July 2001.
464. Guo LJ, J. Phys. D.:Appl. Phys., 37, p.p. R123 - R121, 2004.
465. Mirken CA, MRS Bulletin, 26, p.p. 535 - 538, July 2001.
466. Sirringhaus H, Kawase T, and Friend RH, MRS Bulletin, 26, p.p. 539-543, July 2001.
467. Brown TL, Swaminathan S, Chadrasekar S, Compton WD, King AH, Trumble KP, J. Mater. Res., 17, Number 10, October 2002.
468. Swaminathan S, Swanson C, Brown TL, Kezar RF, Chandrasekar RF, Compton WD, Trumble KP, Mat. Res. Soc. Symp. Proc, 821, P9.5.1-9.5.6., 2004.
469. Swaminathan S, Swanson C, Brown TL, Kezar RF, Chandrasekar RF, Compton WD, Trumble KP, Mat. Res. Soc. Symp. Proc, 821, P8.27.1-8.27.6., 2004.
470. Tolfree D and Eijkel K, Reducing Time-to-market for Micro- Nanotechnology Base Products; Presented at World Nano- Economic Congress- Europe, London, 6 November 2003.
471. Walsh ST, Roadmapping a Disruptive Technology. Technology Forecasting and Social Change, 71, Issue 1-2, January - February 2004.
472. MANCEF Roadmap, by Micro-Nanotechnology Comerciahsation Educational Foundation, Published 2002, Naples, Florida, US.
473. NEXUS -Product Technology Roadmap, Sept 2003, CEA Grenoble, France.
474. NEXUS - 'Market Analysis for Microsystems 2000-2005', February 2002, CEA Grenoble, France.