Surface integrity in material removal processes: Recent advances

CIRP Annals - Manufacturing Technology

Volumn 60, Issue 2, 2011, Pages 603-626

  Jawahir, I S ^a   Brinksmeier, E ^b   M'Saoubi, R ^c   Aspinwall, D K ^d   Outeiro, J C ^e   Meyer, D ^b   Umbrello, D ^f   Jayal, A D ^a  

^a UNIVERSITY OF KENTUCKY   (United States)

^b UNIVERSITY OF BREMEN   (Germany)

^c R and D Materials and Technology Development   (Sweden)

^d UNIVERSITY OF BIRMINGHAM   (United Kingdom)

^e CATHOLIC UNIVERSITY OF PORTUGAL   (Portugal)

^f UNIVERSITY OF CALABRIA   (Italy)

Author keywords

Material removal; Predictive models; Surface integrity

Indexed keywords

COLLABORATIVE WORKING; EXPERIMENTAL TECHNIQUES; FUNCTIONAL PERFORMANCE; FUTURE RESEARCH DIRECTIONS; MATERIAL REMOVAL; MATERIAL REMOVAL PROCESS; PREDICTIVE MODELS; RECENT PROGRESS; ROUND ROBIN; SURFACE INTEGRITY; THEORETICAL INVESTIGATIONS;

PREDICTIVE CONTROL SYSTEMS; STRIPPING (REMOVAL);

SURFACES;

EID: 80051673337     PISSN: 00078506     EISSN: 17260604     Source Type: Journal    
DOI: 10.1016/j.cirp.2011.05.002     Document Type: Article

References (247)

1. A.M. Abrao, and D.K. Aspinwall The Surface Integrity of Turned and Ground Hardened Bearing Steel Wear 196 1996 279 284 (Pubitemid 126378909)
2. A.M. Abrao, P.E. Faria, J.C.C. Rubio, P. Reis, and J.P. Davim Drilling of Fiber Reinforced Plastics: A Review Journal of Materials Processing Technology 186 1-3 2007 1 7 (Pubitemid 46330713)
3. S. Akcan, W.I.S. Shah, S.P. Moylan, S. Chandrasekar, P.N. Chabra, and H.T.Y. Yang Formation of White Layers in Steels by Machining and Their Characteristics Metallurgical and Materials Transactions A 33 4 2002 1245 1254 (Pubitemid 34474969)
4. P. Albrecht New Developments in the Theory of Metal Cutting Process Part I: The Ploughing Process in Metal Cutting Journal of Engineering for Industry 82 1960 348 358
5. P. Albrecht New Developments in the Theory of Metal Cutting Process Part II: The Theory of Chip Formation Journal of Engineering for Industry 82 1961 557 567
6. C. Anderberg, P. Pawlus, B.-G. Rosen, and T.R. Thomas Alternative Descriptions of Roughness for Cylinder Liner Production Journal of Materials Processing Technology 209 2009 1936 1942
7. ANSI, American National Standard on Surface Integrity (1986) Society of Manufacturing Engineers (SME), ANSI B2111.
8. M.T. Antar, S.L. Soo, D.K. Aspinwall, M. Cuttell, R. Perez, and A.J. Winn WEDM of Aerospace Alloys Using Clean Cut Generator Technology Proc. 16th ISEMXVI Shanghai, China 2010 285 290
9. N.F.M. Aris, and K. Cheng Characterization of the Surface Functionality on Precision Machined Engineering Surfaces International Journal of Advanced Manufacturing Technology 38 2008 402 409
10. R.M. Arunachalam, and M.A. Mannan Machinability of Nickel-based High Temperature Alloys Machining Science and Technology 4 1 2000 127 168 (Pubitemid 30589587)
11. D.K. Aspinwall, R.C. Dewes, H.G. Lee, and J. Simao Electrical Discharge Surface Alloying of Ti and Fe Workpiece Materials Using Refractory Powder Compact Electrodes and Cu Wire Annals of the CIRP 52 1 2003 151 156
12. D.K. Aspinwall, R.C. Dewes, and A.L. Mantle The Machining of γ-TiAl Intermetallic Annals of the CIRP 54 1 2005 99 104
13. D.K. Aspinwall, S.L. Soo, A.E. Berrisford, and G. Walder Workpiece Surface Roughness and Integrity After WEDM of Ti-6Al-4V and Inconel 718 Using Minimum Damage Generator Technology Annals of the CIRP 57 1 2008 187 190
14. V.P. Astakhov Surface Integrity-definition and Importance in Functional Performance J.P. Davim, Surface Integrity in Machining 2010 Springer-Verlag London 978-1-84882-873-5
15. V.P. Astakhov, and J.C. Outeiro Chapter 1 - Metal Cutting Mechanics, Finite Element Modeling J.P. Davim, Machining Fundamentals and Recent Advances 2008 Springer
16. D.A. Axinte, N. Ngindy, K. Fox, and I. Unanue Process Monitoring to Assist the Workpiece Surface Quality in Machining International Journal of Machine Tools & Manufacture 44 2004 1091 1108
17. D.A. Axinte, and R.C. Dewes Surface Integrity of Hot Work Tool Steel After High Speed Milling - Experimental Data and Empirical Models Journal of Materials Processing Technology 127 2002 325 335
18. M.R. Bache, S.J. Tuppen, W.E. Voice, and D.K. Aspinwall Novel Low Cost Procedure for Fabrication of Diffusion Bonds in Ti6/4 Machining Science and Technology 25 2009 139 149
19. J.A. Bailey, and S. Jeelani Determination of Subsurface Plastic Strain in Machining Using an Embossed Grid Wear 36 2 1976 199 206
20. M.M. Barash, and W.J. Schoech A Semi-analytical Model of the Residual Stress Zone in Orthogonal Machining Proc. 11th Int. MTDR Conf. 1970 Pergamon Press London
21. J. Barry, and G. Byrne TEM Study on the Surface White Layer in Two Turned Hardened Steels Journal of Materials Science Engineering A 25 2002 356 364 (Pubitemid 34209650)
22. K. Bewilogua, G. Bräuer, A. Dietz, J. Gäbler, G. Goch, B. Karpuschewski, and B. Szyszka Surface Technology for Automotive Engineering Annals of the CIRP 58 2 2009 608 627
23. K. Bitans, and R.H. Brown An Investigation of the Deformation in Orthogonal Cutting International Journal of Machine Tool Design and Research 5 3 1965 155 165
24. P. Bleys, J.P. Kruth, B. Lauwers, B. Schacht, V. Balasubramanian, L. Froyen, and J. Humbeeck Surface and Sub-surface Quality of Steel After EDM Advanced Engineering Materials 8 1 2006 15 25
25. L.N. Brewer, M.A. Othon, Y. Gao, B.T. Hazel, W.H. Buttrill, and Z. Zhong Comparison of Diffraction Methods for Measurement of Surface Damage in Superalloys Journal of Materials Research 21 7 2006 1775 1781 (Pubitemid 44261606)
26. E. Brinksmeier X-ray Stress Measurement - A Tool for the Study and Layout of Machining Processes Annals of the CIRP 33 1 1985 485 490 (Pubitemid 15577269)
27. E. Brinksmeier State of the Art Non Destructive Measurement of Subsurface Material Properties and Damages Precision Engineering 11 1989 211 224 (Pubitemid 20679812)
28. E. Brinksmeier, J.C. Aurich, E. Govekar, C. Heinzel, H.W. Hoffmeister, F. Klocke, J. Peters, R. Rentsch, D.J. Stephenson, E. Uhlmann, K. Weinert, and M. Wittmann Advances in Modeling and Simulation of Grinding Processes Annals of the CIRP 55 2006 667 696 (Pubitemid 46148812)
29. E. Brinksmeier, and T. Brockhoff Utilization of Grinding Heat as a New Heat Treatment Process Annals of the CIRP 45 1 1996 283 286 (Pubitemid 126601450)
30. E. Brinksmeier, J.T. Cammett, W. König, P. Leskovar, J. Peters, and H.K. Tönshoff Residual Stresses - Measurement and Causes in Machining Processes Annals of the CIRP 31 2 1982 491 510 (Pubitemid 13564887)
31. E. Brinksmeier, and R. Janssen Drilling of Multi-layer Composite Materials Consisting of Carbon Fiber Reinforced Plastics (CFRP), Titanium and Aluminium Alloys Annals of the CIRP 51 1 2002 87 90
32. E. Brinksmeier, E. Schneider, W.A. Theiner, and H.K. Tönshoff Nondestructive Testing for Evaluating Surface Integrity Annals of the CIRP 33 2 1984 489 509 (Pubitemid 15577072)
33. E. Brinksmeier, G. Levy, D. Meyer, and A.B. Spierings Surface Integrity of Selective-laser-melted Components Annals of the CIRP 59 1 2010 601 606
34. T. Brockhoff Grind-hardening: A Comprehensive View Annals of the CIRP 48 1 1999 255 260
35. R. Calistes, S. Swaminathan, T.G. Murthy, C. Huang, C. Saldana, M.R. Shankar, and S. Chandrasekar Controlling Gradation of Surface Strains and Nanostructuring by Large-strain Machining Scripta Materialia 60 2009 17 20
36. S. Caruso, S. Di Renzo, O.W. Dillon, D. Umbrello, A.D. Jayal, and I.S. Jawahir Finite Element Modeling of Microstructural Changes in Hard Turning of AISI 52100 Steel Advances in Materials Research 223 2011 960 969
37. J.M. Challen, and P.L.B. Oxley Slip-line Fields for Explaining the Mechanics of Polishing and Related Processes International Journal of Mechanical Sciences 26 6-8 1983 403 418 (Pubitemid 15434603)
38. A. Chandra, J.J. Ryu, P. Karra, P. Shrotriya, and T. Weik Electrochemical Dissolution of Biomedical Grade Ti6Al4V: Influence of Stress and Environment Annals of the CIRP 58 1 2009 499 502
39. C.H. Che-Haron Tool Life and Surface Integrity in Turning Titanium Alloy Journal of Materials Processing Technology 118 2001 231 237 (Pubitemid 33147992)
40. C.H. Che-Haron, and A. Jawaid The Effect of Machining on Surface Integrity of Titanium Alloy Ti-6% Al-4% V Journal of Materials Processing Technology 166 2 2005 188 192 (Pubitemid 41050642)
41. S. Chen, and I.S. Jawahir The Influence of Cutting Edge Radius on Surface Integrity and Size Effects in Dry Turning of Automotive Aluminum Alloy A356 with Diamond Tools Proc. of the 11th CIRP Conf. on MMO Gaithersburg, MD, USA 2008 247 254
42. W.C. Chen Some Experimental Investigations in the Drilling of Carbon Fiber-reinforced Plastic (CFRP) Composite Laminates International Journal of Machine Tools & Manufacture 37 8 1997 1097 1108
43. Y.K. Chou, and C.J. Evans White Layers and Thermal Modeling of Hard Turned Surfaces International Journal of Machine Tools & Manufacture 39 1999 1863 1881 (Pubitemid 30508629)
44. Y.K. Chou Surface Hardening of AISI 4340 Steel by Machining: A Preliminary Investigation Journal of Materials Processing Technology 124 2002 171 177
45. L.V. Colwell, M.J. Sinnot, and J.C. Tobin The Determination of Residual Stresses in Hardened Ground Steel Transactions of the ASME 77 1955 1099 1105
46. P. Dahlman, F. Gunnberg, and M. Jacobson The Influence of Rake Angle Cutting Feed and Cutting Depth on Residual Stresses in Hard Turning Journal of Materials Processing Technology 147 2 2004 181 184
47. J.P. Davim, and P. Reis Study of Delamination in Drilling Carbon Fibre Reinforced Plastics (CFRP) Using Design Experiments Composite Structures 59 2003 481 487 (Pubitemid 36166765)
48. J.P. Davim, J.C. Rubio, and A.M. Abrao A Novel Approach Based on Digital Image Analysis to Evaluate the Delamination Factor After Drilling Composite Laminates Composites Science and Technology 67 2007 1939 1945 (Pubitemid 46444623)
49. A. Decneut, and J. Peters Continuous Measurement of Residual Stress in Thin Cylindrical Pieces Using Deflection-etching Techniques. Tech. Paper IQ73-618 1973 Society of Manufacturing Engineers Dearborn, MI 20 p
50. W. Degner, and T. Lauterlein The Determination of Microhardness and Residual Stress of Machined Ferromagnetic Components by Using the Barkhausen Effect Annals of the CIRP 29 11 1980 403 408 (Pubitemid 11454084)
51. B. Denkena, D. Boehnke, and J.H. Dege Helical Milling of CFRP - Titanium Layer Compounds CIRP Journal of Manufacturing Science and Technology 1 2 2008 64 69
52. 2 Ψ and the Scattering Vector Method Material Science Forum 638-642 2010 2383 2388
53. B. Denkena, M. Jung, C. Müller, and N. Kramer Characterisation of White Layers Inflicted by Mechanical and Thermal Loads within Manufacturing Processes 3rd ISTMA Bursa, Turkey, 17-19 June 2004 507 512
54. B. Denkena, and A. Lucas Biocompatible Magnesium Alloys as Absorbable Implant Materials - Adjusted Surface and Subsurface Properties by Machining Processes Annals of the CIRP 56 2007 113 116 (Pubitemid 46898260)
55. B. Denkena, H.K. Tönshoff, T. Friemuth, C. Mueller, H. Zenner, F. Renner, and M. Koehler Fatigue Strength of Hard Turned Components Proc. of the 1st ICMEN and EUREKA Partnering Event Sani, Halkidiki, Greece, 3-4 October 2002 185 194
56. Deshpande A (2011) Improved Machining of Metal-on-metal Hip Implants. PhD Dissertation, University of Kentucky.
57. S. Desvaux, M. Duquennoy, J. Gualandri, and M. Ourak the Evaluation of Surface Residual Stress in Aeronautic Bearings Using the Barkhausen Noise Effect NDT International 37 2004 9 17
58. M.F. Devries, M. Field, and J.F. Kahles Relationship of Surface Roughness and Surface Integrity to Functional Properties Annals of the CIRP 25 2 1976 569 573
59. D. Dingley Progressive Steps in the Development of Electron Backscatter Diffraction and Orientation Imaging Microscopy Journal of Microscopy 213 3 2004 214 224 (Pubitemid 38304953)
60. A. Dugas, J.J. Lee, M. Terrier, and J.Y. Hascoët Development of a Machining Simulator Considering Machine Behavior Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture 217 9 2003 1333 1339
61. F. Dupont, C.A. Brown, and B. Ilschner Microstructure and Microhardness in the Superficial Layers Deformed by Machining 7075 Aluminum Alloy Zeitschrift für Metallkunde 79 1988 74 80 (Pubitemid 18606745)
62. M. Duquennoy, M. Ouaftouh, M.L. Qian, F. Jenot, and M. Ourak Ultrasonic Characterization of Residual Stresses in Steel Rods Using a Laser Line Source and Piezoelectric Transducers NDT International 34 5 2001 355 362 (Pubitemid 32487081)
63. Ee KC (2002) Finite Element Modelling and Analysis of Residual Stresses in 2-D Machining. PhD Dissertation, University of Kentucky.
64. B. Eigenmann, and E. Macherauch Histoire Et État Actuel De L'analyse Des Contraintes Par Rayons X Journal de Physique IV 6 4 1996 C4.151 C4.185
65. M.H. El-Axir A Method of Modelling Residual Stress Distribution in Turning for Different Materials International Journal of Machine Tools & Manufacture 42 2002 1055 1063 (Pubitemid 34771996)
66. M. El-Gallab, and M. Sklad Machining of Al/Sic Particulate Metal Matrix Composites Part II: Workpiece Surface Integrity Journal of Materials Processing Technology 83 1998 277 285 (Pubitemid 128408312)
67. M.E. El Mansori, S. Mezghani, L. Sabri, and H. Zahouani On Concept of Process Signature in Analysis of Multistage Surface Formation Surface Engineering 26 3 2010 216 223
68. E.O. Ezugwu, J. Bonney, R.B. Da Silva, and O. Cakir Surface Integrity of Finished Turned Ti-6Al-4V with PCD Tools Using Conventional and High Pressure Coolant Supplies International Journal of Machine Tools & Manufacture 47 2007 884 891 (Pubitemid 46205140)
69. N. Fang, and I.S. Jawahir A New Methodology for Determining the Stress State of the Plastic Region in Machining with Restricted Contact Tools International Journal of Mechanical Sciences 43 8 2001 1747 1770 (Pubitemid 32544282)
70. N. Fang, and I.S. Jawahir An Analytical Predictive Model and Experimental Validation for Machining with Grooved Tools Incorporating the Effects of Strains Strain-rates and Temperatures Annals of the CIRP 51 1 2002 83 86
71. N. Fang, I.S. Jawahir, and P.L.B. Oxley A Universal Slip-line Model with Non-unique Solutions for Machining with Curled Chip Formation and a Restricted Contact Tool Journal of Mechanical Science 43 2 2001 557 580
72. M. Field, and J.F. Kahles The Surface Integrity of Machined and Ground High Strength Steels DMIC Report 210 1964 54 77
73. M. Field, and J.F. Kahles Review of Surface Integrity of Machined Components Annals of the CIRP 20 2 1971 153 163
74. M. Field, J.F. Kahles, and J.T. Cammett A Review of Measuring Methods for Surface Integrity Annals of the CIRP 21 2 1972 219 238
75. L. Filice, F. Micari, L. Settineri, and D. Umbrello Wear Modelling in Mild Steel Orthogonal Cutting when Using Uncoated Carbide Tools Wear 262 5-6 2007 545 554 (Pubitemid 46123419)
76. C.E. Fischer, and A.R. Bandar Finite Element Simulation of Surface Microstructure Effects in Metal Cutting CIRP Workshop on High Performance Cutting Dublin, Ireland, 12-13 June 2008
77. V. Garcia Navas, I. Ferreres, J.A. Maranon, C. Garcia-Rosales, and J. Gil Sevillano Electro-discharge Machining (EDM) Versus Hard Turning and Grinding - Comparison of Residual Stresses and Surface Integrity Generated in AISI O1 Tool Steel Journal of Materials Processing Technology 195 2008 186 194 (Pubitemid 350193227)
78. C. Genzel, and W. Reimers Some New Aspects in X-ray Stress Analysis of Thin Layers Surface & Coatings Technology 116-119 1999 404 409 (Pubitemid 30052426)
79. H. Ghadbeigi, S.R. Bradbury, C. Pinna, and J.R. Yates Determination of Micro-scale Plastic Strain Caused by Orthogonal Cutting International Journal of Machine Tools & Manufacture 48 2008 228 235 (Pubitemid 350016770)
80. F. Ghanem, C. Braha, and H. Sidhom Influence of Steel Type on Electrical Discharge Machined Surface Integrity Journal of Materials Processing Technology 142 2003 163 173
81. S. Ghosh, and V. Kain Microstructural Changes in AISI 304L Stainless Steel due to Surface Machining: Effect on Its Susceptibility to Chloride Stress Corrosion Cracking Journal of Nuclear Materials 403 1-3 2010 62 67
82. A. Ginting, and M. Nouari Surface Integrity of Dry Machined Titanium Alloys International Journal of Machine Tools & Manufacture 49 2009 325 332
83. G.B. Goch, B. Schmitz, J. Karpuschewski, M. Geerkens, P. Reigl, and R.R. Sprongl Review of Non-destructive Measuring Methods for the Assessment of Surface Integrity: A Survey of New Measuring Methods for Coatings Layered Structures and Processed Surfaces Precision Engineering 23 1999 9 33
84. B. Griffiths Manufacturing Surface Technology - Surface Integrity and Functional Performance 2001 Penton Press London 18571-8029-1
85. W. Grzesik, B. Kruszynski, and A. Ruszaj Surface Integrity of Machined Surfaces J.P. Davim, Surface Integrity in Machining 2010 Springer-Verlag London 978-1-84882-873-5
86. Y. Guo, and S. Ammula Real-time AE Monitoring for Surface Damage in Hard Machining International Journal of Machine Tools & Manufacture 45 2005 1622 1627 (Pubitemid 41203359)
87. Y.B. Guo, and C.R. Liu FEM Analysis of Mechanical State on Sequentially Machined Surfaces Machining Science and Technology 6 1 2002 21 41 (Pubitemid 34691201)
88. Y.B. Guo, W. Li, and I.S. Jawahir Surface Integrity Characterization and Prediction in Machining of Hardened and Difficult-to-machine Alloys: A State-of-art Research Review and Analysis Machining Science and Technology 13 3 2009 437 470
89. Y.B. Guo, A.W. Warren, and F. Hashimoto The Basic Relationships between Residual Stress, White Layer, and Fatigue Life of Hard Turned and Ground Surfaces in Rolling Contact CIRP Journal of Manufacturing Science and Technology 2 2 2010 129 134
90. F. Hashimoto, Y.B. Guo, and A.W. Warren Surface Integrity Difference Between Hard Turned and Ground Surfaces and Its Impact on Fatigue Life Annals of the CIRP 55 1 2006 81 84 (Pubitemid 44578367)
91. V. Hauk, W.K. Krug, G. Vaessen, and H. Weisshaupt Der Eigendehnungs-/Eigenspannungszustand nach Schleifbeanspruchung Journal of Heat Treatment & Materials 35 3 1980 144 147
92. C. Heinzel, and N. Bleil The Use of the Size Effect in Grinding for Work-hardening Annals of the CIRP 56 1 2007 327 330 (Pubitemid 46898309)
93. E.K. Henriksen Residual Stresses in Machined Surfaces Transactions of the ASME 73 1951 69 74
94. J. Herrmann, J.Y. Kim, L.J. Jacobs, J. Qu, J.W. littles, and M.F. Savage Assessment of Material Damage in a Nickel-base Superalloy Using Nonlinear Rayleigh Surface Waves Journal of Applied Physics 99 12 2006 124913 124918
95. H. Hocheng, and C.C. Tsao The Path Towards Delamination-free Drilling of Composite Materials Journal of Materials Processing Technology 167 2005 251 264 (Pubitemid 41162336)
96. R. Hood, F. Lechner, D.K. Aspinwall, and W. Voice Creep Feed Grinding of Gamma Titanium Aluminide and Burn Resistant Titanium Alloys Using Sic Abrasive International Journal of Machine Tools & Manufacture 47 2007 1486 1492 (Pubitemid 46550793)
97. J. Hua, D. Umbrello, and R. Shivpuri Investigation of Cutting Conditions and Cutting Edge Preparations for Enhanced Compressive Subsurface Residual Stress in the Hard Turning of Bearing Steel Journal of Materials Processing Technology 171 2006 180 187 (Pubitemid 43052667)
98. J.X. Hua, V. Cheng, R. Bedekar, Y. Shivpuri, F. Matsumoto, F. Hashimoto, and T.R. Watkins Effect of Feed Rate Workpiece Hardness and Cutting Edge on Subsurface Residual Stress in the Hard Turning of Bearing Steel Using Chamfer + Hone Cutting Edge Geometry Material Science Engineering A 394 2005 238 248 (Pubitemid 40595014)
99. Y. Iino, T.Y. Kim, and S.D. Mun Machined Surface Plastic Strain in Orthogonal Cutting by Subsequent Recrystallizations Technique Wear 199 2 1996 211 216
100. K. Jacobus, R.E. Devor, and S.G. Kapoor Machining-induced Residual Stress: Experimentation and Modeling Journal of Manufacturing Science and Engineering: Transactions of the ASME 122 2000 20 31
101. A. Javidi, U. Rieger, and W. Eichlseder The Effect of Machining on the Surface Integrity and Fatigue Life International Journal of Fatigue 30 2008 2050 2055
102. S. Jeelani, and J.A. Bailey Residual Stress Distribution in Machining Annealed 18 Percent Nickel Maraging Steel Journal of Engineering Materials and Technology: Transactions of the ASME 108 1986 93 98 (Pubitemid 16551218)
103. S. Jeelani, and K. Ramakrishnan Subsurface Plastic Deformation in Machining 6Al-2Sn-4Zr-2Mo Titanium Alloy Wear 81 1983 263 273
104. X. Jiang Robust Solution for the Evaluation of Stratified Functional Surfaces Annals of the CIRP 59 1 2010 573 576
105. B.H. Karpuschewski, J. Knoche, and M. Hipke Gear Finishing by Abrasive Processes Annals of the CIRP 57 2 2008 621 640
106. T.Y. Kim, Y. Matsumoto, S.H. Gon, and D.W. Wu A New Technique to Measure Plastic Strain in the Machined Surface Wear 147 2 1991 311 322 (Pubitemid 21695742)
107. H.A. Kishawy, and M.A. Elbestawi Effect of Edge Preparation and Cutting Speed on Surface Integrity of Die Material in High Speed Machining Proceedings of the ASME IMECE 8 1998 269 276
108. F. Klocke, E. Brinksmeier, and K. Weinert Capability Profile of Hard Cutting and Grinding Processes Annals of the CIRP 54 2 2005 557 580 (Pubitemid 43199078)
109. W. König, A. Berktold, and K.F. Koch Turning Versus Grinding - A Comparison of Surface Integrity Aspects and Attainable Accuracies Annals of the CIRP 42 1 1993 39 43 (Pubitemid 23679093)
110. W. Konig, and P. Grab Quality Definition and Assessment in Drilling Fibre Reinforced Thermosets Annals of the CIRP 38 1 1989 119 124
111. W. König, M. Klinger, and R. Link Machining Hard Materials with Geometrically Defined Cutting Edges-field of Application and Limitations Annals of the CIRP 39 1 1990 61 64
112. W. König, R. Komanduri, H.K. Tonshoff, and G. Ackershott Machining of Hard Materials Annals of the CIRP 33 2 1984 417 427
113. J.P. Kruth, L. Froyen, L. Stevens, and P. Dejonghe In-process Alloying of the White Layer of a Workpiece Machined by Die-sinking EDM International Journal of Electrical Machines 3 1998 33 38
114. J.P. Kruth, L. Stevens, L. Froyen, and B. Lauwers Study of the White Layer of a Surface Machines by Die-sinking Electro-discharge Machining Annals of the CIRP 44 1 1995 169 172
115. M.C. Kong, and D. Axinte Response of Titanium Aluminide Alloy to Abrasive Waterjet Cutting: Geometrical Accuracy and Surface Integrity Issues versus Process Parameters Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture 223 2009 19 42
116. S. Kumar, R. Singh, T.P. Singh, and B.L. Sethi Surface Modification by Electrical Discharge Machining: A Review Journal of Materials Processing Technology 209 2009 3675 3687
117. M. Kunieda, B. Lauwers, K.P. Rajurkar, and B.M. Schumacher Advancing EDM Through Fundamental Insight Into the Process Annals of the CIRP 54 2 2005 599 622 (Pubitemid 43199080)
118. J. Kwong, D.A. Axinte, and P.J. Withers The Sensitivity of Ni-based Superalloy to Hole Making Operations: Influence of Process Parameters on Subsurface Damage and Residual Stress Journal of Materials Processing Technology 209 2009 3968 3977
119. I. Lazoglu, D. Ulutan, B.E. Alaca, S. Engin, and B. Kaftanoglu An Enhanced Analytical Model for Residual Stress Prediction in Machining Annals of the CIRP 57 1 2008 81 84
120. S.J. Lee, M.R. Hwang, S. Shankar, and W.D. Chandrasekar Compton Large Strain Deformation Field in Machining Metallurgical and Materials Transactions A 37 2006 1633 1643
121. S.Y. Liang, and J.C. Su Residual Stress Modeling in Orthogonal Machining Annals of the CIRP 56 2007 65 68 (Pubitemid 46898249)
122. S.Y. Liang, C.R. Hanna, and R.M. Chao Achieving Machining Residual Stresses Through Model-driven Planning of Process Parameters Transactions of the NAMRI/SME 36 2008 445 452
123. C.R. Liu, and M.M. Barash The Mechanical State of the Sublayer of a Surface Generated by Chip-removal Process Part 2: Cutting with a Tool with Flank Wear Journal of Engineering for Industry: Transactions of the ASME 98 4 1976 1202 1208
124. C.R. Liu, and X.P. Yang The Scatter of Surface Residual Stresses Produced by Face-turning and Grinding Machining Science and Technology 5 1 2001 1 21 (Pubitemid 32697774)
125. Q. Liu, X. Chen, and N. Gindy Investigation of Acoustic Emission Signals Under a Simulative Environment of Grinding Burn International Journal of Machine Tools & Manufacture 46 3-4 2006 284 292 (Pubitemid 41827902)
126. P.M. Lonardo, D.A. Lucca, and L.D. Chiffre Emerging Trends in Surface Metrology Annals of the CIRP 51 2 2002 701 723
127. D.A. Lucca, E. Brinksmeier, and G. Goch Progress in Assessing Surface and Subsurface Integrity Annals of the CIRP 47 2 1998 669 693 (Pubitemid 128580338)
128. R. M'Saoubi, J.C. Outeiro, B. Changeux, J.L. Lebrun, and A.M. Dias Residual Stress Analysis in Orthogonal Machining of Standard and Resulfurized AISI 316L Steels Journal of Materials Processing Technology 96 1-3 1999 225 233 (Pubitemid 30542707)
129. R. M'Saoubi, J.C. Outerio, H. Chandrasekaran, O.W. Dillon Jr., and I.S. Jawahir A Review of Surface Integrity in Machining and Its Impact on Functional Performance and Life of Machined Products International Journal of Sustainable Manufacturing 1 1-2 2008 203 236
130. R. M'Saoubi, and L. Ryde Application of the EBSD Technique for the Characterisation of Deformation Zones in Metal Cutting Materials Science and Engineering A 405 1-2 2005 339 349 (Pubitemid 41258321)
131. E. Macherauch Die Eigenspannungsbestimmung Mit Rontgenstrahlen International Kolloquium der Hochschule fGr Elektrotechnik 1 lmenau 111 1958 359 364
132. 2 Psi - Verfahren der röntgenographischen Spannungsmessung Zeitschrift fur Angewandte Physik 13 1961 305 312
133. E. Macherauch, and U. Wolfstieg Recent German Activities in the Field of X-ray Stress Analysis Materials Science and Engineering 30 1 1977 1 13 (Pubitemid 8551620)
134. A.L. Mantle, and D.K. Aspinwall Surface Integrity of a High Speed Milled Gamma Titanium Aluminide Journal of Materials Processing Technology 118 2001 143 150 (Pubitemid 33147977)
135. A.L. Mantle, and D.K. Aspinwall Surface Integrity and Fatigue Life of Turned Gamma Titanium Aluminide Journal of Materials Processing Technology 72 1996 413 420
136. I. Marinescu, and D. Axinte A Time-frequency AE-based Monitoring Technique to Identify Workpiece Surface Malfunctions in Milling with Multiple Teeth Cutting Simultaneously International Journal of Machine Tools & Manufacture 49 2009 53 65
137. M. Maris, R. Snoeys, and J. Peters Analysis of Plunge Grinding Operations Annals of the CIRP 24 1 1975 225 230
138. Y. Matsumoto, F. Hashimoto, and G. Lahoti Surface Integrity Generated by Precision Hard Turning Annals of the CIRP 48 1 1999 59 62
139. Metcut Research Associates 3rd edition Machining Data Handbook vol. 2 1980 MDC
140. C. Miyasaka, and B.R. Tittmann Recent Advances in Acoustic Microscopy for Nondestructive Evaluation Journal of Pressure Vessel Technology 122 3 2000 374 378
141. N. Mohri, Y. Fukusima, Y. Fukuzawa, T. Tani, and N. Saito Layer Generation Process on Work-piece in Electrical Discharge Machining Annals of the CIRP 52 1 2003 157 160
142. V. Moorthy, B.A. Shaw, P. Mounford, and P. Hopkins Magnetic Barkhausen Emission Technique for Evaluation of Residual Stress Alteration by Grinding in Case-carburised En 36 Steel Acta Materialia 53 2005 4997 5006 (Pubitemid 41443448)
143. C. Murphy, G. Byrne, and M.D. Gilchrist The Performance of Coated Tungsten Carbide Drills When Machining Carbon Fibre-reinforced Epoxy Composite Materials Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture 216 2 2002 143 152 (Pubitemid 34300709)
144. K. Nakayama, and K. Tamura Size Effect in Metal Cutting Force Journal of Engineering for Industry: Transactions of the ASME 90 1 1968 119 126
145. M.N.A. Nasr, E.G. Ng, and M.A. Elbestawi Effects of Workpiece Thermal Properties on Machining-induced Residual Stresses - Thermal Softening and Conductivity Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture 221 2007 1387 1400
146. H. Ni, and A.T. Alpas Sub-micrometer Structures Generated During Dry Machining of Copper Materials Science and Engineering A 361 2003 338 349 (Pubitemid 37298804)
147. Novovic D (2004) The effects of machined workpiece surface topography and integrity on fatigue life. PhD Dissertation, University of Birmingham.
148. J.C. Outeiro, D. Umbrello, and R. MSaoubi Experimental and Numerical Modeling of the Residual Stresses Induced in Orthogonal Cutting of AISI 316L Steel International Journal of Machine Tools & Manufacture 46 2006 1786 1794 (Pubitemid 44175809)
149. J.C. Outeiro, A.M. Dias, and J.L. Lebrun Experimental Assessment of Temperature Distribution in Three-dimensional Cutting Process Machining Science and Technology 8 3 2004 357 376
150. J.C. Outeiro, A.M. Dias, and I.S. Jawahir On the Effects of Residual Stresses Induced by Coated and Uncoated Cutting Tools with Finite Edge Radii in Turning Operations Annals of the CIRP 55 1 2006 111 116 (Pubitemid 44578374)
151. J.C. Outeiro, K.C. Ee, O.W. Dillon Jr., P.C. Wanigarathne, and I.S. Jawahir Some Observations on Comparing the Modeled and Measured Residual Stresses on the Machined Surface Induced by Orthogonal Cutting of AISI 316L Steel Proc. of the 9th CIRP Int. Workshop on MMO Bled, Slovenia, 17-19 March 2006
152. J.C. Outeiro, R. Kandibanda, J.C. Pina, O.W. Dillon Jr., and I.S. Jawahir Size-effect and Surface Integrity in Machining and Their Influence on Product Sustainability International Journal of Sustainable Manufacturing 2 1 2011 112 126
153. P.L.B. Oxley The Mechanics of Machining: An Analytical Approach to Assessing Machinability 1989 Ellis Horwood Ltd England
154. E. Persson, I. Erikson, and L. Zackrisson Effects of Hole Machining Defects on Strength and Fatigue Life of Composite Laminates Composites Part A: Applied Science and Manufacturing 28A 1997 141 151 (Pubitemid 127388312)
155. J. Peters, J.B. Bryan, W.T. Estler, C. Evans, H. Kunzmann, D.A. Lucca, S. Sartori, H. Sato, E.G. Thwaite, P. Vanherck, R.J. Hocken, J. Peklenik, T. Pfeifer, H. Trumpold, and T.V. Vorburger Contribution of CIRP to the Development of Metrology and Surface Quality Evaluation During the Last Fifty Years Annals of the CIRP 50 2 2001 471 488 (Pubitemid 34019116)
156. J. Peters, R. Snoeys, and A. Decneut The Significance of Chip Thickness in Grinding Annals of the CIRP 23 2 1974 227 237
157. J. Peters, R. Snoeys, and M. Maris Residual Stresses in Grinding Proc. AGARD Conf. Advanced Fabrication Processes Florence, Italy, CP-256, March 1979
158. J. Peters, and E. Vansevenant A Thermal Model Covering Pendulum Grinding and Creep Feed Grinding Annals of the CIRP 32 1 1983 491 494 (Pubitemid 14520355)
159. G. Poulachon, A. Albert, M. Schluraff, and I.S. Jawahir An Experimental Investigation of Work Material Microstructure Effects on White Layer Formation in PCBN Hard Turning International Journal of Machine Tools & Manufacture 45 2005 211 218
160. P.S. Prevey X-ray Diffraction Residual Stress Techniques Metals Handbook 1986 American Society for Metals OH 380 392
161. Prevey PS (1998) Burnishing Method and Apparatus for Providing a Layer of Compressive Residual Stress in the Surface of a Workpiece. US Patent 5,826,453.
162. Z. Pu, S. Caruso, D. Umbrello, O.W. Dillon Jr., D.A. Puleo, and I.S. Jawahir Analysis of Surface Integrity in Dry and Cryogenic Machining of AZ31B Mg Alloys Advances in Materials Research 223 2011 439 448
163. Z. Pu, O.W. Dillon Jr., I.S. Jawahir, and D.A. Puleo Microstructural Changes of AZ31 Magnesium Alloys Induced by Cryogenic Machining and Its Influence on Corrosion Resistance in Simulated Body Fluid for Biomedical Applications Erie, Pennsylvania, USA, 12-15 October Proc. of the 2010 ASME Int. MSEC 2010
164. J.D. Puerta Velásquez, A. Tidu, B. Bolle, P. Chevrier, and J.J. Fundenberger Sub-surface and Surface Analysis of High Speed Machined Ti-6Al-4V Alloy Materials Science and Engineering A 527 10-11 2010 2572 2578
165. F. Pusavec, H. Hamdi, J. Kopac, and I.S. Jawahir Surface Integrity in Cryogenic Machining of Nickel Based Alloy - Inconel 718 Journal of Materials Processing Technology 211 2011 773 783
166. Y. Quan, and W. Zhong Investigation on Drilling-Grinding of CFRP Frontiers of Mechanical Engineering in China 4 1 2009 60 63
167. H. Ramasawmy, L. Blunt, and K.P. Rajurkar Investigation of the Relationship Between the White Layer Thickness and 3D Surface Texture Parameters in the Die Sinking EDM Process Precision Engineering 29 2005 479 490 (Pubitemid 41329171)
168. A. Ramesh, J. Thiele, and S. Melkote Residual Stress and Sub-surface Flow in Finish Hard Turned AISI 4340 and 52100 Steels: A Comparative Study Proceedings of the ASME IMECE 1998 831 837 (Pubitemid 30565967)
169. A. Ramesh, S.N. Melkote, L.F. Allard, L. Riester, and T.R. Watkins Analysis of White Layers Formed in Hard Turning of AISI 52100 Steel Materials Science and Engineering A 390 2005 88 97 (Pubitemid 40014587)
170. A. Ramesh, and S.N. Melkote Modeling of White Layer Formation Under Thermally Dominant Conditions in Orthogonal Machining of Hardened AISI 52100 Steel International Journal of Machine Tools & Manufacture 48 2008 402 414
171. M. Ramulu, G. Paul, and J. Patel EDM Surface Effects on the Fatigue Strength of a 15 Vol% Sic/Al Metal Matrix Composite Material Composite Structures 54 2001 79 86 (Pubitemid 32832455)
172. V. Randle Recent Developments in Electron Backscatter Diffraction Advances in Imaging and Electron Physics 151 2008 363 416 (Pubitemid 351350625)
173. V. Randle Electron Backscatter Diffraction: Strategies for Reliable Data Acquisition and Processing Materials Characterization 60 9 2009 913 922
174. D. Ravindra, J.A. Patten, and J. Qu Single Point Diamond Turning Effects on Surface Quality and Subsurface Damage in Ceramics Proceedings of the ASME 2009 Int. MSEC Indiana, USA 2009 707 713
175. S. Rawat, and Attia H Characterisation of the Dry High Speed Drilling Process of Woven Composites Using Machinability Maps Annals of the CIRP 58 1 2009 105 108
176. J. Rech, H. Hamdi, and S. Valette Workpiece Surface Integrity J.P. Davim, Machining: Fundamentals and Recent Advances 2008 Springer-Verlag London 978-1-84800-212-8
177. J. Rech, G. Kermouche, W. Gresik, C. García-Rosales, A. Khellouki, and V. Garcia-Navas Characterization and Modelling of the Residual Stresses Induced by Belt Finishing on a AISI52100 Hardened Steel Journal of Materials Processing Technology 208 2008 187 195
178. J. Rech, and A. Moisan Surface Integrity in Finish Hard Turning of Case-hardened Steels International Journal of Machine Tools & Manufacture 43 2003 543 550
179. R. Rentsch, and I. Inasaki Investigation of Surface Integrity by Molecular Dynamics Simulation Annals of the CIRP 44 1 1995 295 298
180. J.C. Robelo, A. Morao Dias, D. Kremer, and J.L. Lebrun Influence of EDM Pulse Energy on the Surface Integrity of Martensitic Steels Journal of Materials Processing Technology 84 1998 90 96 (Pubitemid 128638948)
181. C.O. Ruud A Review of Selected Non-destructive Methods for Residual Stress Measurement NDT International 15 1 1982 15 23
182. A.B. Sadat Surface Region Damage of Machined Inconel 718 Nickel Base Superalloy using Natural and Controlled Contact Length Tools Wear 119 1987 225 235
183. A.B. Sadat, and M.Y. Reddy Plastic Strain Analysis of the Machined Surface Region using Fine Grid Etched by Photoresist Technique Experimental Mechanics 29 1989 346 349 (Pubitemid 20612800)
184. M. Salio, T. Berruti, and G. De Poli Prediction of Residual Stress Distribution After Turning in Turbine Disks International Journal of Mechanical Sciences 48 2006 976 984 (Pubitemid 43866065)
185. H. Sasahara The Effect on Fatigue Life of Residual Stress and Surface Hardness Resulting from Different Cutting Conditions of 0.45%C Steel International Journal of Machine Tools & Manufacture 45 2005 131 136
186. H. Sasahara, T. Obikawa, and T. Shirakashi The Prediction of Effects of Cutting Condition on Mechanical Characteristics in Machined Layer E. Usui, Advancement of Intelligent Production 1994 Elsevier 473 478
187. D.W. Schwach, and Y.B. Guo A Fundamental Study on the Impact of Surface Integrity by Hard Turning on Rolling Contact Fatigue International Journal of Fatigue 28 2006 1838 1844 (Pubitemid 44344314)
188. T. Semba, K. Sakuma, Y. Tani, and H. Sato Thickness Measurement of a Metallurgically Damaged Layer on a Ground Surface Using an Acoustic Microscope Annals of the CIRP 38 1 1989 549 552
189. M.R. Shankar, B.C. Rao, S. Lee, S. Chandrasekar, A.H. King, and W.D. Compton Severe Plastic Deformation (SPD) of Titanium at Near-ambient Temperature Acta Materialia 54 2006 3691 3700 (Pubitemid 44088633)
190. A.R.C. Sharman, D.K. Aspinwall, R.C. Dewes, D. Clifton, and P. Bowen The Effects of Machined Workpiece Surface Integrity on the Fatigue Life of γ-TiAl International Journal of Machine Tools & Manufacture 41 2001 1681 1685
191. A.R.C. Sharman, J.I. Hughes, and K. Ridgway An Analysis of Residual Stresses Generated in Inconel 718 When Turning Journal of Materials Processing Technology 173 2006 359 367 (Pubitemid 43344294)
192. A.R.C. Sharman, A. Amarasinghe, and K. Ridgway Tool Life and Surface Integrity Aspects When Drilling and Hole Making in Inconel 718 Journal of Materials Processing Technology 200 2008 424 432 (Pubitemid 351318185)
193. J.Y. Sheikh-Ahmad The Machining of Polymer Composites 2009 Springer Science + Business Media LLC 978-0-387-35539-9
194. I. Shyha, S.L. Soo, D.K. Aspinwall, and S. Bradley Effect of Laminate Configuration and Feed Rate on Cutting Performance When Drilling Holes in Carbon Fibre Reinforced Plastic Composites Journal of Materials Processing Technology 210 2010 1023 1034
195. I. Shyha, S.L. Soo, D.K. Aspinwall, S. Bradley, S. Dawson, and C.J. Pretorius Drilling of Titanium/CFRP/Aluminium Stacks Key Engineering Materials 447-448 2010 624 633
196. I.S. Shyha, D.K. Aspinwall, S.L. Soo, and S. Bradley Drill Geometry and Operating Effects When Cutting Small Diameter Holes in CFRP International Journal of Machine Tools & Manufacture 49 2009 1008 1014
197. Shyha IS (2010) Drilling of Carbon Fibre Reinforced Plastic Composites. PhD Thesis, University of Birmingham.
198. A. Simoneau, E. Ng, and M.A. Elbestawi Grain Size and Orientation Effects When Microcutting AISI 1045 Steel Annals of the CIRP 56 1 2007 57 60 (Pubitemid 46898247)
199. A. Simoneau, E. Ng, and M.A. Elbestawi Surface Defects During Microcutting International Journal of Machine Tools & Manufacture 46 2006 1378 1387 (Pubitemid 44119145)
200. S.L. Soo, R. Hood, M. Lannette, D.K. Aspinwall, and W.E. Voice Superabrasive Creep Feed Grinding of a Burn Resistant Titanium (BuRTi) Alloy International Journal of Advanced Manufacturing Technology 53 2011 1019 1026
201. K. Stout How Smooth is Smooth? Surface Measurement and Their Relevance in Manufacturing Production Engineer May 1980 17 22
202. J. Sun, and Y.B. Guo A Comprehensive Experimental Study on Surface Integrity by End Milling Ti-6Al-4V Journal of Materials Processing Technology 209 2009 4036 4042
203. S. Swaminathan, M.R. Shankar, S. Lee, J. Hwang, A.H. King, R.F. Kezar, B.C. Rao, T.L. Brown, S. Chandrasekhar, W.D. Compton, and K.P. Trumble Large Strain Deformation and Ultra-fine Grained Materials by Machining Materials Science and Engineering A 410-411 2005 358 363 (Pubitemid 41762319)
204. C. Tassin, F. Laroudie, M. Pons, and L. Lelait Improvement of the Wear Resistance of 316L Stainless Steel by Laser Surface Alloying Surface & Coatings Technology 80 1996 207 210 (Pubitemid 126397047)
205. R. Teti Machining of Composite Materials Annals of the CIRP 51 2 2002 611 634
206. R. Teti, K. Jemielniak, G. Odonnell, and D. Dornfeld Advanced Monitoring of Machining Operations Annals of the CIRP 59 2 2010 717 739
207. J.D. Thiele, S.N. Melkote, R.A. Peascoe, and T.R. Watkins Effect of Cutting-edge Geometry and Workpiece Hardness on Surface Residual Stresses in Finish Hard Turning of AISI 52100 Steel Journal of Manufacturing Science and Engineering: Transactions of the ASME 122 2000 642 648
208. M. Thomas, S. Turner, and M. Jackson Microstructural Damage During High-speed Milling of Titanium Alloys Scripta Materialia 62 2010 250 253
209. S. To, W.B. Lee, and C.F. Cheung Orientation Changes of Aluminium Single Crystals in Ultra-precision Diamond Turning Journal of Materials Processing Technology 140 1-3 2003 346 351
210. S. To, Y.H. Zhu, and W.B. Lee Effects of Cutting Depth on the Surface Microstructure of a Zn-Al Alloy During Ultra-precision Machining Applied Surface Science 254 6 2008 1559 1564 (Pubitemid 350296395)
211. H.K. Tönshoff Randzonenbeeninflussung durch Spanen und Abtragen - ein Beitrag zur Anpassung der Analysemethoden Annals of the CIRP 23 1 1974 187 188
212. H.K. Tönshoff, C. Arendt, and R. Ben Amor Cutting of Hardened Steel Annals of the CIRP 49 2 2000 547 566 (Pubitemid 32076463)
213. H.K. Tönshoff, C. Blawit, and J. Schmidt Potential and Limitation of Hard Turning Abrasives Magazine 10 11 1996 12 30
214. H.K. Tönshoff, and E. Brinksmeier Determination of the Mechanical and Thermal Influences on Machined Surfaces by Microhardness and Residual Stress Analysis Annals of the CIRP 29 2 1980 519 530 (Pubitemid 11486911)
215. H.K. Tönshoff, T. Friemuth, and J.C. Becker Process Monitoring in Grinding Annals of the CIRP 51 2 2002 551 571
216. H.K. Tönshoff, B. Karpuschewski, and H.-G. Wobker Quality Control of Surface Integrity with Micromagnetic Techniques Production Engineer 2 1995 203 206
217. H.K. Tönshoff, F. Kroos, and C. Marzenell High-pressure Water Peening - A New Mechanical Surface-strengthening Process Annals of the CIRP 46 1 1997 113 116
218. H.K. Tönshoff, J. Peters, I. Inasaki, and T. Paul Modelling and Simulation of Grinding Processes Annals of the CIRP 41 2 1992 677 688 (Pubitemid 23606285)
219. H.K. Tönshoff, W.V. Schmieden, I. Inasaki, W. König, and G. Spur Abrasive Machining of Silicon Annals of the CIRP 39 2 1990 621 635
220. H.K. Tönshoff, and G. Spur Untersuchungen über den Zustand geschliffener Oberflächen Annals of the CIRP 24 1 1975 503 507
221. H.K. Tönshoff, and H.G. Wobker Influence of Surface Integrity on the Wear of Ceramic Cutting Tools Journal of the Society of Tribologists and Lubrication Engineers 47 7 1991 579 583 (Pubitemid 21699645)
222. H.K. Tönshoff, H.G. Wobker, and D. Brandt Hard Turning - Influences on the Workpiece Properties Transactions of the NAMRI/SME 13 1995 215 220
223. H.K. Tönshoff, H.G. Wobker, and D. Brandt Tool Wear and Surface Integrity in Hard Turning Production Engineer 3 1 1996 19 24
224. C.C. Tsao, and H. Hocheng Taguchi Analysis of Delamination Associated with Various Drill Bits in Drilling of Composite Material International Journal of Machine Tools & Manufacture 44 2004 1085 1090
225. D. Ulutan, B. Erdem Alaca, and I. Lazoglu Analytical Modeling of Residual Stresses in Machining Journal of Materials Processing Technology 183 2007 77 87 (Pubitemid 46195171)
226. D. Ulutan, and T. Ozel Machining Induced Surface Integrity in Titanium and Nickel Alloys: A Review International Journal of Machine Tools & Manufacture 51 3 2010 250 280
227. D. Umbrello Influence of Material Microstructure Changes on Surface Integrity in Hard Machining of AISI 52100 Steel International Journal of Advanced Manufacturing Technology 54 9 2011 887 898
228. D. Umbrello, J. Hua, and R. Shivpuri Hardness-based Flow Stress and Fracture Models for Numerical Simulation of Hard Machining AISI 52100 Bearing Steel Materials Science and Engineering A 374 2004 90 100 (Pubitemid 38728268)
229. D. Umbrello, J.C. Outeiro, R. M'Saoubi, A.D. Jayal, and I.S. Jawahir A Numerical Model Incorporating the Microstructure Alteration for Predicting Residual Stresses in Hard Machining of AISI 52100 Steel Annals of the CIRP 59 1 2010 113 116
230. D. Umbrello, S. Rizzuti, J.C. Outeiro, R. Shivpuri, and R. M'Saobi Hardness-based Flow Stress for Numerical Simulation of Hard Machining of AISI H13 Tool Steel Journal of Materials Processing Technology 199 1-3 2008 64 73
231. F. Valiorgue, J. Rech, H. Hamdi, P. Gilles, and J.M. Bergheau New Approach for the Modelling of Residual Stresses Induced by Turning 316L Journal of Materials Processing Technology 191 1-3 2007 270 273 (Pubitemid 46881116)
232. E. Vansevenant, and J. Peters An Improved Mathematical Model to Predict Residual Stresses in Surface Plunge Grinding Annals of the CIRP 36 1 1987 413 416 (Pubitemid 17591892)
233. M. Vashista, and S. Paul Correlation between Surface Integrity of Ground Medium Carbon Steel with Barkhausen Noise Parameters and Magnetic Hysteresis Loop Characteristics Materials and Design 30 2009 1595 1603
234. F. Vollertsen, D. Biermann, H.N. Hansen, I.S. Jawahir, and K. Kuzman Size Effects in Manufacturing of Metallic Components Annals of the CIRP 58 2 2009 566 587
235. A. Vyas, and M.C. Shaw The Significance of the White Layer in a Hard Turned Steel Chip Machining Science and Technology 4 1 2000 169 175 (Pubitemid 30589586)
236. X. Wang, and I.S. Jawahir Recent Advances in Plasticity Applications in Metal Machining: Slip-line Models for Machining with Rounded Cutting Edge Restricted Contact Grooved Tools International Journal of Machining and Machinability Materials 2 1 2007 347 360
237. C.W. Wern, M. Ramulu, and K. Colligan A Study of the Surface Texture of Composite Drilled Holes Journal of Materials Processing Technology 37 1993 373 389 (Pubitemid 23633457)
238. T. Wernicke, O. Krüger, M. Herms, J. Würfl, H. Kirmse, W. Neumann, T. Behm, G. Irmer, and G. Tränkle Analysis of Materials Modifications Caused by UV Laser Micro Drilling of Via Holes in Algan/Gan Transistors on Sic Applied Surface Science 253 19 2007 8008 8014 (Pubitemid 47058700)
239. P.J. Withers Residual Stress and Its Role in Failure Reports on Progress in Physics 70 12 2007 2211 2264
240. P.J. Withers, M. Turski, L. Edwards, P.J. Bouchard, and D.J. Buttle Recent Advances in Residual Stress Measurement International Journal of Pressure Vessels and Piping 85 2008 118 127 (Pubitemid 351248346)
241. D.W. Wu, and Y. Matsumoto The Effect of Hardness on Residual Stresses in Orthogonal Machining of AISI 4340 Steel Journal of Engineering for Industry: Transactions of the ASME 112 3 1990 245 252 (Pubitemid 20723363)
242. Q. Xie, A.E. Bayoumi, and L.A. Kendall On Tool Wear and Its Effect on Machined Surface Integrity Journal of Materials Shaping Technology 8 1990 255 265
243. X.P. Xu, Y.Q. Yu, and H.J. Xu Effect of Grinding Temperatures on the Surface Integrity of a Nickel-based Superalloy Journal of Materials Processing Technology 129 2002 359 363
244. A. Yamamoto, T. Yamada, S. Nakhigashi, L. Liu, M. Terasawa, and H. Tsubakino Effects of Surface Grinding on Hardness Distribution and Residual Stress in Low Carbon Austenitic Stainless Steel SUS316L ISIJ International 44 10 2004 1780 1782 (Pubitemid 40002143)
245. J. Yan, T. Asami, H. Harada, and T. Kuriyagawa Fundamental Investigation of Subsurface Damage in Single Crystalline Silicon Caused by Diamond Machining Precision Engineering 33 4 2009 378 386
246. X. Yang, and C.R. Liu A New Stress-based Model of Friction Behavior in Machining and Its Significant Impact on Residual Stresses Computed by Finite Element Method International Journal of Mechanical Sciences 44 2002 703 723 (Pubitemid 34440773)
247. C. Zeppenfeld Speed Stroke Grinding of γ-Titanium Aluminide Annals of the CIRP 55 1 2006 333 338 (Pubitemid 44578425)