Progress in assessing surface and subsurface integrity

CIRP Annals - Manufacturing Technology

Volumn 47, Issue 2, 1998, Pages 669-693

  Lucca, D A ^a   Brinksmeier, E ^b   Goch, G ^b  

^a OKLAHOMA STATE UNIVERSITY   (United States)

^b UNIVERSITY OF BREMEN   (Germany)

Author keywords

Subsurface damage; Surface; Surface integrity

Indexed keywords

CERAMIC MATERIALS; GLASS; METALS; SINGLE CRYSTALS; SURFACE ROUGHNESS;

SURFACE ALTERATION; SURFACE INTEGRITY ASSESSMENT;

SURFACE TESTING;

EID: 0032306264     PISSN: 00078506     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0007-8506(07)63248-X     Document Type: Article

References (195)

1. Abe, K., Yasunaga, N., Miyashita, M., Yoshioka, J., Daito, M., 1993, Development of Ultraprecision Grinding Equipment for Ductile Mode Grinding of Brittle Materials, Japanese Society for Precision Engineering, 59: 73-78.
2. Akimova, I.V., Borovich, L.N., Vasilishcheva, LP., Dudenkova, A.V., Egorov, A.V., Nasibov, A.S., Talenskii, O.N., Popov, Y.M., Shapkin, P.V., 1977, Determination of the Depth of the Disturbed Layer in Laser Screens Made of Cadmium Sulfide Single Crystals, Soviet Journal of Quantum Electronics, 7: 765-767.
3. Almond, D.P., Patel, P.M., 1996, Photothermal Science and Techniques, Physics and its Applications, Vol. 10, Chapman & Hall, London.
4. Bandyopadhyay, B.P., Ohmori, H., Takahashi, I., 1996, Ductile Regime Mirror Finish Grinding of Ceramics with Electrolytic In-process Dressing (ELID) Grinding, Materials and Manufacturing Processes, 11: 789-801.
5. Bell, T.J., Bende, A., Field, J.S., Swain, M.V., Thwaite, E.G., 1991, The Determination of Surface Plastic and Elastic Properties by Ultra Micro-indentation, Metrologia, 28:463-469.
6. Bell, T.J., Field, J.S., Swain, M.V., 1992, Elastic-Plastic Characterization of Thin Films with Spherical Indentation, Thin Solid Films, 220: 289-294.
7. Betzig, E., Trautman, J.K., 1992, Near-Field Optics: Microscopy, Spectroscopy, and Surface Modification Beyond the Diffraction Limit, Science, 257:189-195.
8. Bhagavatula, S.R., Komanduri, R., 1996, On Chemomechanical Polishing of SbN4 with Cr203, Philosophical Magazine A, 74:1003-1017.
9. Bhushan, B. (ed.). 1995, Handbook of Micro/Nanotribology, CRC Press, Boca Raton.
10. Bismayer, U., Brinksmeier, E., Guttler, B., Seibt, H., Menz, C, 1994, Measurement of Subsurface Damage in Silicon Wafers, Precision Engineering, 16/2:139-144.
11. Black, D., Burdette, H., Cantwell, G., 1995, X-ray Diffraction Imaging of ZnSe, Electrochemical Society Proceedings, 95-6: 13-22.
12. Black, D., Braun, L., Burdette, H., Evans, C, Hockey, B., Polvani, R., White, G., 1997a, Using Advanced Diagnostics to Detect Subsurface Damage in Sapphire, Proceedings of the SPIE, 3134: 272-283.
13. Black, D., Polvani, R., Braun, L., Hockey, B., White, G., 1997b, Detection of Sub-Surface Damage: Studies in Sapphire, Proceedings of the SPIE, 3060:102-114.
14. Bluhm, H., Wadas, A., Wiesendanger, R., Meyer, K.-P., Szczesniak, L, 1997, Electrostatic Force Microscopy on Ferroelectric Crystals in Inert Gas Atmosphere, Physical Review B, 55:4-7.
15. Bowen, D.K., Tanner, B.K., 1993, Characterization of Engineering Surfaces by Grazing-lncidence X-Ray Reflectivity, Nanotechnology, 4:175-182.
16. Bowen, D.K., Wormington, M., 1993, Grazing Incidence X-Ray Characterization of Materials, Advances in X-Ray Analysis, 36:171-184.
17. Bowen, D. K., Wormington, M., 1994, Measurement of Surface Roughnesses and Topography at Nanometer Levels by Diffuse X-Ray Scattering, Annals of the CIRP, 43/1:497-500.
18. Bowen, D.K., Tanner, B.K., 1998, High Resolution X-Ray Diffractometry and Topography, Taylor and Francis Ltd., London.
19. Brinksmeier, E., 1985, X-Ray Stress Measurement-A Tool for the Study and Layout of Machining Processes, Annals of the CIRP, 34/1: 485-490.
20. Brinksmeier, E., 1989, State-of-the-Art Non-Destructive Measurement of Sub-Surface Material Properties and Damages, Precision Engineering, 11:22-35.
21. Brinksmeier, E., 1992, Increase of Fatigue Life of Components by High-Pressure Water Jet Surface Peening, Annals of the CIRP, 41/1: 737.
22. Brinksmeier, E., Cammett, J.T., Konig, W., Leskovar, P., Peters, J., Tönshoff, H.K., 1982, Residual Stresses-Measurement and Causes in Machining Processes, Annals of the CIRP, 31/2: 491-510.
23. Brinksmeier, E., Schneider, E., Theiner, W.A., Tonshoff, H.K., 1984, Nondestructive Testing for Evaluating Surface Integrity, Annals of the CIRP, 33/2:489-509.
24. Brinksmeier, E., Brockhoff, T., 1996, Utilization of Grinding as a New Heat Treatment Process, Annals of the CIRP, 45/1: 283-286.
25. Brinksmeier, E., Brockhoff, T., 1997, Advanced Grinding Processes for Surface Strengthening of Structural Parts, Machining Science and Technology, 1: 299-309.
26. Brinksmeier, E., Preuß, W., Riemer, O., Malz, R., 1998, Ductile to Brittle Transition Investigated by Plunge-Cut Experiments in Monocrystalline Silicon Paper presented at the ASPE Spring Topical Meeting on Silicon Machining, Carmel, CA
27. Bryan, J.B., 1966, Survey on Functional Characteristics of Surfaces, Report to the CIRP -Group S, Oct. 29, 1996.
28. Byrne, G., Barry, J., Young, P., 1997, Surface Integrity of AIS19 Machined with PCD Cutting Tools, Annals of the CIRP, 46/1: 489-492.
29. Chen, Y., Liu, X., Weber, E., Bourret, E.D., Liliental-Weber, Z., Haller, E. E., Washburn, J., Olego, D. J., Dormán, D.R., Gaines, J.M., Tasker, N.R., 1994, Structures and Electronic Properties of Misfit Dislocations in ZnSe/GaAs(001) Heterojunctions, Applied Physics Letters, 65: 549-551.
30. Chou, Y.K., Evans, C.J., 1997, White Layers and Thermal Modeling of Hard Turned Surfaces, Manufacturing Science and Technology, 2: 75-82.
31. Chu, W.-K., Mayer, J.W., Nicolet, M.-A., 1978, Backscattering Spectrometry, Academic Press, New York.
32. Crowell, P.A., Young, D.K., Keller, S., Hu, E.L., Awschalom, D.D., 1998, Near-field Scanning Optical Spectroscopy of an InGaN Quantum Well, Applied Physics Letters, 72: 927-929.
33. Daniel, J., Domfeld, D., 1996a, Design and Application of In-Process Acoustic Sensors for Maximum Sensitivity-Methods and an Example in Diamond Turning, Proceedings of the American Society for Precision Engineering Annual Meeting: 510-514.
34. Daniel, J., Dornfeld, D., 1996b, In-Process Detection of the Ductile-Brittle Transition in High Speed Scratching of Glass - Theory and Experiment, Proceedings of the American Society for Precision Engineering Annual Meeting: 561-565.
35. Degner, W., Lauterlein, T., 1980, The Determination of Microhardness and Residual Stress of Machined Ferromagnetic Components by Using the Barkhausen Effect, Annals of the CIRP, 29/1:403-408.
36. DeVries, M.F., Field, M., Kahles, J.F., 1976, Relationship of Surface Roughness and Surface Integrity to Functional Properties, Annals of the CIRP, 25/2: 569-573.
37. Dobmann, R., Becker, R., Salzburger, HJ., Arnold, W., Waschkies, E., 1985, Nondestructive Testing of Surface Breaking Defects and Near Surface Defects, Annals of the CIRP, 34/1: 495-497.
38. Doerner, M.F., Nix, W.D., 1986, A Method for Interpreting the Data from Depth- Sensing Indentation Instruments, Journal of Materials Research, 1: 601-609.
39. Donaldson, R.R., Riddle, RA, Syn, C.K., Taylor, J.S., 1987, Chip Science: A Basic Study of the Single-Point Cutting Process, LLNL, UCRL-53868-87:6-12-6-15.
40. Elbestawi, M.A., Chen, L, Becze, C.E., El-Wardany, T.I., 1997, High-Speed Milling of Dies and Molds in Their Hardened State, Annals of the CIRP, 46/1: 57-62.
41. Erickson, A., Sadwick, L., Neubauer, G., Kopanski, J., Adderton, D., Rogers, M., 1996, Quantitative Scanning Capacitance Microscopy Analysis of Two-Dimensional Dopant Concentrations at Nanoscale Dimensions, Journal of Electronic Materials, 25: 301-304.
42. Evans, C, Polvani, R., Postek, M., Rhorer, R., 1987, Some Observations on Tool Sharpness and Sub-Surface Damage in Single Point Diamond Turning, SPIE, In-Process Optical Metrology for Precision Machining, 802: 52-66.
43. Feldman, L.C., Mayer, J.W., Picraux, ST., 1982, Materials Analysis by Ion Channeling, Academic Press, New York.
44. Field, M., Kahles, J.F., 1964, The Surface Integrity of Machined and Ground High Strength Steels DMIC Report 210: 54-77.
45. Field, M., Kahles, J.F., 1971, Review of Surface Integrity of Machined Components, Annals of the CIRP, 20/2:153-163.
46. Field, M., Kahles, J. F., Cammett, J. T., 1972, A Review of Measuring Methods for Surface Integrity, Annals of the CIRP, 21/2: 219-238.
47. Field, M., Koster, W. P., 1972, Surface Integrity in Grinding, Proceedings of the International Grinding Conference, Pittsburgh, PA.
48. Fumichi, H., 1986, Structure of Lapped Germanium, Wear, 107:183-188.
49. Fusstetter, H., Schnegg, A., Graf, D., Kirschner, H., Brohl, M., Wagner, P., 1995, Impact of Chemomechanical Polishing on the Chemical Composition and Morphology of the Silicon Surface, Paper presented at the Materials Research Society Symposium, San Francisco, California, USA.
50. Gerk, A.P., Tabor, D., 1978, Indentation Hardness and Semiconductor-Metal Transition of Germanium and Silicon, Nature, 271: 732-733.
51. Germer, T.A., 1997, Angular Dependence and Polarization of Out-of-Plane Optical Scattering from Particulate Contamination, Subsurface Defects, and Surface Microroughness, Applied Optics, 36: 8798-8805.
52. Germer, T.A. 1998, Polarized Light Scattering and Its Application to Microroughness, Particle, and Defect Detection, Characterization and Metrology for ULSI Technology, Seiler, D.G., Bullís, W.M., Diebold, A.C., McDonald, R., Shaffner, T. (eds.), American Institute of Physics, New York.
53. Germer, TA, Asmail, C.C., 1997, Bidirectional Ellipsometry and Its Application to the Characterization of Surfaces, Proceedings of SPIE, 3121:173-182.
54. Goch, G., Schmitz, B., Reick, M., 1993, Photothermal Sensing Techniques for Measuring Material Properties and Near-Surface Defects, Annals of the CIRP, 42/1: 623-626.
55. Goch, G., Geerkens, J., Reick, M., Schmitz, B., 1994, Analysis of Surface Layer Variations by Photothermal Means, Journal de Physique IV, C7-4: 319-322.
56. Goch, G., Reigl, M., 1996, Application of the Finite-Element Method and the Finite-Difference Method to Photothermal Inspections, Journal of Applied Physics, 79: 9084-9089.
57. Goch, G., Walther, H.G., 1998, Reconstruction of Depth-Dependent Parameter Profiles Based on Photothermal Measurements, Annals of the CIRP, 47/1:483-486.
58. Goch, G., Schmitz, B., Karpuschewski, B., Geerkens, J., Reigl, M., Sprongl, P., Ritter, R., 1998, Review of Non-Destructive Measuring Methods for the Assessment of Surface Integrity, Precision Engineering, in press.
59. Güttier, B., Dewing, H.L., Basu, R.N., Schiel, D., 1995, Quantitative Evaluation of the Oxygen Content in YBa2Cu307-o Epitaxially Grown Thin Films Using Near-Infrared Excited Raman Spectrometry, Physica C, 251: 165-170.
60. Haisma, J., van der Kruis, F.J.H.M., Spierings, A.C.M., Oomen, J.M., Fey, F.M.J.G., 1992, Damage-Free Tribochemical Polishing of Diamond at Room Temperature: A Finishing Technology, Precision Engineering, 14: 20-27.
61. Hickman, K.C., Wingler, R., Williams, F.L., Sobczak, CE., Camiglia, C.K., Kranenberg, C.F., Jungling, K., McNeil, J.R., Black, J.P., 1993, Correlation Between Substrate Preparation Technique and Scatter Observed from Optical Coatings, Applied Optics, 32: 3409-3415.
62. Hoffmann, A., Christen, J., Gutowski, J., 1992, Cathodoluminescence Wavelength Imaging for Spatial Mapping of Excitons Bound to Dislocations and Structural Defects in CdS, Advanced Materials for Optics and Electronics, 1: 25-28.
63. Horio, K., Kasai, T., Ogata, Y., Kobayashi, A., 1992, A Study on Damaged Layer Remaining in Diamond Mirror Cut Surface, Annals of the CIRP, 41/1:137-140.
64. Hovel, H.J., 1992, Scanned Photoluminescence of Semiconductors, Semicconductor Science and Technology, 7: A1-A9.
65. Huang, Y., Williams, C.C., 1994, Capacitance-Voltage Measurement and Modeling on a Nanometer Scale by Scanning C-V Microscopy, Journal of Vacuum Science and Technology B, 12: 369-372.
66. Huang, Y., Williams, C.C., Smith, H., 1996, Direct Comparison of Cross-Sectional Scanning Capacitance Microscope Dopant Profiling and Vertical Secondary Ion-Mass Spectroscopy Profile, Journal of Vacuum Science and Technology B, 14: 433-436.
67. Huber, A.M., Grattepain, C, 1989, Crystal Defect Study in III-V Compound Technology, Materials Science Forum, 38-41:1345-1350.
68. Huber, A.M., Briot, N., 1994, Material Quality Assessment of Epitaxial Layers of ZnSe and Related Compounds, Materials Science & Engineering B, 28: 61-64.
69. Imbusch, G.F., 1978, Inorganic Luminescence, in Lumb, M.D. (ed.), Luminescence Spectroscopy, Academic Press, London, 1-92.
70. Inasaki, I., 1987, Grinding of Hard and Brittle Materials, Annals of the CIRP, 36/2: 463-471.
71. Inasaki, I., Tönshoff, H.K., Howes, T.D., 1993, Abrasive Machining in the Future, Annals of the CIRP, 42/2: 723-732.
72. Ives, N.A., Leung, M.S., 1988, Noncontact Laminar-Flow Polishing for GaAs, Review of Scientific Instruments, 59:172-175.
73. Jabr, S.N., 1985, Total Internal Reflection Microscopy: Inspection of Surfaces of High Bulk Scatter Materials, Applied Optics, 24:1689-1692.
74. Kailer, A., Gogotsi, Y.G., Nickel, K.G., 1997, Phase Transformation of Silicon Caused by Contact Loading, Journal of Applied Physics, 81: 3057-3063.
75. Karpuschewski, B., Marzenell, C, 1996, Surface Generation by Hard Machining, Paper presented at the 4th European Conference on Residual Stresses.
76. Karpuschewski, B., Borbe, O, 1997, Hard Machining, Paper presented at the International Seminar on Machining Technologies, Bangalore, India.
77. Komanduri, R., 1996, On Material Removal Mechanisms in Finishing of Advanced Ceramics and Glasses, Annals of the CIRP, 45/1: 509-514.
78. Komanduri, R., Umehara, N., Raghunandan, M., 1996, On the Possibility of Chemo-Mechanical Action in Magnetic Float Polishing of Silicon Nitride, Journal of Tribology, 118: 721-727.
79. Komanduri, R., Lucca, D.A., Tani, Y., 1997, Technological Advances in Fine Abrasive Processes, Annals of CIRP, 46/2: 545-596.
80. König, W., Klinger, M., Link, R., 1990a, Machining Hard Materials with Geometrically Defined Cutting Edges - Field of Applications and Limitations, Annals of the CIRP, 39/1: 61-64.
81. König, W., Komanduri, R., Tönshoff, H.K., Ackershott, G., 1990b, Machining of Hard Materials, Annals of the CIRP, 39/2: 417-427.
82. König, W., Berktold, A., Koch, K.-F., 1993, Turning Versus Grinding-A Comparison of Surface Integrity Aspects and Attainable Accuracies, Annals of the CIRP, 42/1:39-43.
83. Kozlovskii, V.I., Krysa, A.B., 1991, Atomic Hydrogen as a Passivating Agent for Defects Introduced by Mechanical Polishing into Single-Crystal CdS Wafers, Soviet Physics - Lebedeev Institute Reports, 7: 9-12.
84. Kranenberg, C.F., Jungling, K.C., 1994, Subsurface Damage Identification in Optically Transparent Materials Using a Nondestructive Method, Applied Optics, 33:4248-4253.
85. Kruth, J.P., Stevens, L., Froyen, L., Lauwers, B., 1995a, Study of White Layer of a Surface Machined by Die-Sinking Electro-Discharge Machining, Annals of the CIRP, 44/1:169-172.
86. Kruth, J.-P., Van Humbeeck, J., Stevens, L., 1995b, Micro Structural Investigation and Metallographic Analysis of the White Layer of a Surface Machined by Electro Discharge Machining, Paper presented at the International Symposium for Electromachining, ISEM-XI, Lausanne, Switzerland: 849-862.
87. Kruth, J.P., Tönshoff, H.K., Klocke, F., 1998, Surface and Sub-Surface Quality in Material Removal Processes for Tool Making, Paper presented at the International Symposium for Electromaching, ISEM-XII, Aachen, Germany: 33-64.
88. Kudo, H., 1978, Energy Dependence of Dechanneling by a Dislocation Loop, Physical Review B, 18: 5995-5999.
89. Kunz, R.R., Clark, H.R., Nitshin, P.M., Rothschild, M., Ahern, B.S., 1996, High Resolution Studies of Crystalline Damage Induced by Lapping and Single-Point Diamond Machining of Si(100), Journal of Materials Research, 11:1228-1237.
90. Kushibiki, J.-L, Chubachi, N., 1985, Material Characterization by Line-Focus-Beam Acoustic Microscope, IEEE Transactions on Sonics and Ultrasonics, SU-32: 189-212.
91. Laczik, Z., Booker, G.R., Mowbray, A., 1996a, Assessment of Residual Subsurface Polishing Damage in InP Wafers by Photolulminescence, Journal of Crystal Growth, 158: 37-42.
92. Laczik, Z., Booker, G.R., Mowbray, A., 1996b, Residual Polishing Damage and Surface Quality of Commercial InP Wafers: A Scanning PL Study, Materials Science and Engineering, B42: 217-224.
93. Lan, T.T.N., Seidel, U., Walther, H.G., Goch, G., Schmitz, B., 1995, Experimental Results of Photothermal Microstructural Depth Profiling, Journal of Applied Physics, 78: 4108-4111.
94. Lee, T.C., Lau, W.S., Zhang, J.H., 1994, Surface Integrity of Ultrasonic Machined Ceramics, Advancement of Intelligent Production: 544-549.
95. Leong, J.-K. McMurray, J., Williams, CO, 1996, Spatial Mapping of Ordered and Disordered Domains of GalnP by Near-Field Scanning Optical Microscopy and Scanning Capacitance Microscopy, Journal of Vacuum Science and Technology B, 14: 3113-3116.
96. Leopold, J., 1998, Speckle Interferometry, unpublished notes.
97. Li, K., Liao, T.W., 1996, Surface/Subsurface Damage and the Fracture Stength of Ground Ceramics, Journal of Materials Processing Technology, 57: 207-220.
98. Liao, Z.M., Cohen, S.J., Taylor, J.R., 1995, Total Internal Reflection Microscopy (TIRM) as a Nondestructive Subsurface Damage Assessment Tool, SPIE, 2428: 43-53.
99. Liu, C.-W., Dai, B.-T., Yeh, C.-F., 1995, Characterization of the Chemical-Mechanical Polishing Process Based on Nanoindentation Measurement of Dielectric Films, Journal of the Electrochemical Society, 142: 3098-3114.
100. Lonardo, P.M., 1974, Measurement of Smooth Surface Roughness by Means of Photometric Methods, Annals of the CIRP, 23/1:189-190.
101. Lonardo, P.M., Bruzzone, A.A., Gámbaro, C, Parizzi, F., 1991, Surface Characterization and Defect Detection by Analysis of Images Obtained with Coherent Light, Annals of the CIRP, 40/1: 541-544.
102. Lonardo, P.M., Trumpold, H., De Chiffre, L., 1996, Progress in 3D Surface Microtopography Characterization, Annals of the CIRP, 45/2: 589-598.
103. Lucazeau, G., Abello, L., 1997, Micro-Raman Analysis of Residual Stresses and Phase Transformations in Crystalline Silicon under Microindentation, Journal of Materials Research, 12: 2262-2272.
104. Lucca, DA, Seo, Y.W., Rhorer, R.L., 1994, Aspects of Surface Generation in Orthogonal Ultraprecision Machining, Annals of the CIRP, 43/1:43-46.
105. Lucca, D.A., Rhorer, R.L., Maggiore, C.J., Seo, Y.W., 1995, Assessment of Subsurface Damage in Ultraprecision Machined CdS by Ion Channeling, Annals of the CIRP, 44/1: 513-516.
106. Lucca, D.A., Maggiore, C.J., Rhorer, R.L., 1996, Subsurface Damage Distribution in Ultraprecision Machined CdS, Annals of the CIRP, 45/1: 519-522.
107. Lucca, DA, Maggiore, C.J., 1997, Subsurface Lattice Disorder in Polished ll-VI Semiconductors, Annals of the CIRP, 46/1: 485-488.
108. Lucca, D.A., Chou, P., Hocken, R.J., 1998, Effect of Tool Edge Geometry on the Nanometric Cutting of Ge, Annals of CIRP, 47/1: 475-478.
109. Mamaiis, A.G., Vosniakos, G.C., Vacevanidis, N.M., Junzhe, X., 1988, Residual Stress Distribution and Structural Phenomena of High-Strength Steel Surfaces Due to EDM and Ball-Drop Forming, Annals of the CIRP, 37/1: 531-535.
110. Marshall, D.B., Evans, A.G., Yakub, B.T.K., Tien, J.W., Kino, G.S., 1983, The Nature of Machining Damage in Brittle Materials, Proceedings of the Royal Society London, A385:461-475.
111. Martin, Y., Abraham, D.W., Wickramasinghe, H.K., 1988, High-Resolution Capacitance Measurement and Potentiometry by Force Microscopy, Applied Physics Letters, 52:1103-1105.
112. Mencik, J., Swain, M.V., 1995, Errors Associated with Depth-Sensing Microindentation Tests, Journal of Materials Research, 10:1491-1501.
113. Mencik, J., Münz, D., Quandt, E., Weppelmann, E. R., 1997, Determination of Elastic Modulus of Thin Layers Using Nanoindentation, Journal of Materials Research, 12: 2475-2484.
114. Minowa, K., Sumino, K., 1992, Stress-Induced Amorphization of a Silicon Crystal by Mechanical Scratching, Physical Review Letters, 69: 320-322.
115. Miyoshi, T., Takaya, Y., Saito, K., 1995, Nanometer Measurement of Silicon Wafer Surface Texture Based on Fraunhofer Diffraction Pattern, Annals of the CIRP, 44/1: 489-492.
116. Moore, CD., Pape, I., Tanner, B.K., 1996, Triple Axis X-Ray Diffraction Study of Polishing Damage in lll-V Semiconductors, Acta Cryst, A52: C-369.
117. Mory, J., Quere, Y., 1972, Dechanneling by Stacking Faults and Dislocations, Radiation Effects, 13: 57-66.
118. Myhajlenko, S., Batstone, J.L., Hutchinson, H.J., Steeds, J.W., 1984, Luminescence Studies of Individual Dislocations in ll-VI (ZnSe) and lll-V (InP) Semiconductors, Journal of Physics C: Solid State Physics, 17: 6477-6492.
119. Nakasuji, T., Kodera, S., Hará, S., Matsunaga, H., Ikawa, N., Shimada, S., 1990, Diamond Turning of Brittle Materials for Optical Components, Annals of the CIRP, 39/1:89-92.
120. Namba, Y., Tsuwa, H., Wada, R., 1987, Ultra-Precision Float Polishing Machine, Annals of the CIRP, 36/1:211-214.
121. Namba, Y., Yamada, Y., Tsuboi, A., Unno, K., Nakao, H., 1992, Surface Structure of Mn-Zn Ferrite Single Crystals Ground by an Ultraprecision Surface Grinder with Various Diamond Wheels, Annals of the CIRP, 41/1: 347-351.
122. Namba, Y., Abe, M., 1993, Ultraprecision Grinding of Optical Glasses to Produce Super-Smooth Surfaces, Annals of the CIRP, 42/1: 417-420.
123. Nonnenmacher, M., O'Boyle, M.P., Wickramasinghe, H.K., 1991, Kelvin Probe Force Microscopy, Applied Physics Letters, 58: 2921-2923.
124. Nouruzi-Khorasani, A., Lunn, M.A., Jones, LP., Dobson, P.S., 1990, Surface Damage of CdTe by Mechanical Polishing Investigated by Cross-Sectional TEM, Journal of Crystal Growth, 102: 1069-1073.
125. Novikov, D.V., Ohler, M., Köhler, R., Materlik, G., 1995, Observation of Defects in Crystal Surface Layers by Grazing-lncidence Diffraction X-Ray Topography, Journal of Physics D: Applied Physics, 28: A84-A87.
126. Ohkawa, K., Karasawa, T., Yoshida, A., Hirao, T., Mitsuyu, T., 1989, Homoepitaxial Growth of ZnSe on Dry-etched Substrates, Applied Physics Letters, 54: 2553-2555.
127. Ohmori, H., Nakagawa, T., 1990, Mirror Surface Grinding of Silicon Wafers with Electrolytic In-Process Dressing, Annals of the CIRP, 39/1: 329-332.
128. Ohmori, H., Nakagawa, T., 1995, Analysis of Mirror Surface Generation of Hard and Brittle Materials by ELID (Electronic In-Process Dressing) Grinding with Superfine Grain Metallic Bond Wheels, Annals of the CIRP, 44/1: 287-290.
129. Oliver, W.C., Pharr, G.M., 1992, An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Experiments, Journal of Materials Research, 7: 1564-1583.
130. Parks, R.E., Evans, O, Shafer, H.G., Rhorer, R.L. (eds.), 1989, Proceedings of the American Society for Precision Engineering Spring Conference on Subsurface Damage in Glass, Tucson, AZ.
131. Pecorari, O, Briggs, G.A.D., 1996, Acoustic Microscopy and Dispersion of Leaky Rayleigh Waves on Randomly Rough Surfaces: A Theoretical Study, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 43:428-433.
132. Perkowitz, S., Seiler, D.G., Duncan, W.M., 1994, Optical Characterization in Microelectronics Manufacturing, Journal of Research of the National Institute of Standards and Technology, 99: 605-639.
133. Petzold, M., Landgraf, J., Futing, M., Olaf, J. M., 1995, Application of Atomic Force Microscopy for Microindentation Testing, Thin Solid Films, 264: 153-158.
134. Pietsch, G.J., Henzler, M., 1989, Continuous Roughness Characterization from Atomic to Micron Distances: Angle-Resolved Electron and Photon Scattering, Applied Surface Science, 39:457-472.
135. Pietsch, G.J., Chabal, Y.J., Higashi, G.S., 1995, The Atomic-Scale Removal Mechanism During Chemo-Mechanical Polishing of Si(100) and Si(111), Surface Science, 331-333: 395-401.
136. Podzimek, O., 1986, Residual Stress and Deformation Energy Under Ground Surfaces of Brittle Solids, Annals of the CIRP, 35/1: 397-400.
137. Polvani, R.S., Evans, C, 1988, Micro-Indentation Assessment of Near Surface Material Properties and Sub-Surface Damage in Precision Machining, Proceedings of the International Congress for Ultraprecision Technology, Aachen: 271-286.
138. Polvani, R.S., Evans, C, 1989, Microindentation as a Technique for Assessing Subsurface Damage in Optics, Boulder Damage Symposium.
139. Polvani, R., Black, D., Hockey, B., 1997, Sub-Surface Damage: A Hidden Hazard, Progress in Precision Engineering and Nanotechnology, 729-732.
140. Puttick, K.E., Rudman, M.R., Smith, K.J., Franks, A., Lindsey, K., 1989, Single-Point Diamond Machining of Glasses, Proceedings of the Royal Society London, A426:19-30.
141. Puttick, K.E., Jeynes, C, Rudman, M., Gee, A.E., Chao, C.L., 1992, Surface Damage in Nanomachined Silicon, Semiconductor Science and Technology, 7: 255-259.
142. Puttick, K.E., Whitmore, L.C., Chao, C.L., Gee, A.E., 1994, Transmission Electron Microscopy of Nanomachined Silicon Crystals, Philosophical Magazine A, 69: 91-103.
143. Puttick, K.E., Whitmore, L.C., Zhdan, P., Gee, A.E., Chao, C.L., 1995, Energy Scaling Transitions in Machining of Silicon by Diamond, Tribology International, 28: 349-355.
144. Sakata, O., Nikulin, A., Hashizume, H., 1993, X-Ray Evaluation of Microroughness of Mechanochemically Polished Silicon Surfaces, Japanese Journal of Applied Physics, 32: L616-619.
145. Saunders, S.R.J., Shafirstein, G., Jennett, N.M., Osgerby, S., Meneve, J., Smith, J.F., Vetters, H., Haupt, J., 1996, Calibration of Depth Sensing Indentation Instruments - An International Intercomparison, NPL Spec. Report CMM D8, Teddington, Sussex, UK: 1-31.
146. Seidel, U., Haupt, K., Walther, H.G., Burt, JA, Munidasa, M., 1995, An Attempt Towards Quantitative Photothermal Microscopy, Jounal of Applied Physics, 78: 2050-2056.
147. Semba, T., Tani, Y., Sato, H., 1987, Quantitative Evaluation of the Heat-Damaged Layer on a Ground Surface Using a Scanning Acoustic Microscope, Annals of the CIRP, 36/1: 417-420.
148. Semba, T., Sakuma, K., Tani, Y., Sato, H., 1989, Thickness Measurement of a Metallurgical^ Damaged Layer on a Ground Surface Using an Acoustic Microscope, Annals of the CIRP, 38/1: 549-552.
149. Semba, T., Tani, Y., Sato, H., 1993, Material Characterization of a Machined Surface Using an Anisotropic Acoustic Lens, Annals of the CIRP, 42/1:627-630.
150. Shaw, M.C., Vyas, A., 1994, Heat-Affected Zones in Grinding Steel, Annals of the CIRP, 43/1: 279-282.
151. Shibata, T., Ono, A., Kurihara, K., Makino, E., Ikeda, M., 1994, Crass-Section Transmission Electron Microscope Observations of Diamond-Turned Single-Crystal Si Surfaces, Applied Physics Letters, 65: 2553-2555.
152. Soares, S.F., Baselt, D.R., Black, J.P., Jungling, K.C., Stowell, W.K., 1994, Float-Polishing Process and Analysis of Float-Polished Quartz, Applied Optics, 33: 89-95.
153. Somekh, M.G., Bertoni, H.L., Briggs, G.A.D., Burton, N.J., 1985, A Two-Dimensional Imaging Theory of Surface Discontinuities with the Scanning Acoustic Microscope, Proceedings of the Royal Society London, A401: 29-51.
154. Spur, H.C.G., Tio, H.T., 1988, Surface Layer Damage in the Grinding of Advanced Engineering Ceramics, Proceedings of the 16th NAMRC: 224-231.
155. Suzuki, H., Murakami, S., 1995, An Ultraprecision Grinding Machine for Non-Axisymmetric Aspheric Mirrors, Nanotechnology, 6: 152-157.
156. Syn, C.K., Shimada, S., Taylor, J.S., Donaldson, R.R., 1988, Ductile-Brittle Transition of Cutting Behavior in Diamond Turning of Single Crystal Si, Paper presented at the Annual Spring Meeting of the JSPE, Kawasaki, Japan.
157. Tanner, B.K., 1990, High Resolution X-Ray Diffraction and Topography for Crystal Characterization, Journal of Crystal Growth, 99: 1315-1323.
158. Tanner, B.K., Bowen, D.K., 1993, Advanced X-Ray Scattering Techniques for the Characterization of Semiconduction Materials, Journal of Crystal Growth, 126:1-18.
159. Temple, P.A., 1981, Total Internal Reflection Microscopy: a Surface Inspection Technique, Applied Optics, 20: 2656-2664.
160. Tesar, A.A., Fuchs, BA, Hed, P.P., 1992, Examination of the Polished Surface Character of Fused Silica, Applied Optics, 31: 7164-7172.
161. Tesmer, J.R., Nastasi, M., Barbour, J.C., Maggiore, C.J., Mayer, J.W., 1995, Handbook of Modern Ion Beam Materials Analysis, Materials Research Society, Pittsburgh, PA.
162. Tönshoff, H.K., Brinksmeier, E., 1980, Determination of the Mechanical and Thermal Influences on Machined Surfaces by Microhardness and Residual Stress Analysis, Annals of the CIRP, 29/2: 519-530.
163. Tönshoff, H.K., Brinksmeier, E., 1981, Optimization of Computer Controlled X-Ray Stress Analysis, Annals of the CIRP, 30/1: 509-513.
164. Tönshoff, H.K., Brinksmeier, E., Hetz, F., 1987, Detection of Microcracks, Annals of the CIRP, 36/2: 545-552.
165. Tönshoff, H.K., Trumpold, H., Brinksmeier, E., Wobker, H.-G., 1989, Evaluation of Surface Layers of Machined Ceramics, Annals of the CIRP, 38/2: 699-708.
166. Tönshoff, H.K., V. Schmieden, W., Inasaki, I., König, W., Spur, G., 1990, Abrasive Machining of Silicon, Annals of the CIRP, 39/2: 621-635.
167. Tönshoff, H.K., Hartmann, M., Przywara, R., Klein, M., 1994, Defects in Silicon-Wafers: Characterization and Prevention, Advancement of Intelligent Production: 627-632.
168. Tönshoff, H.K., Karpuschewski, B., Regent, C, 1995a, Intelligent Sensor Systems to Avoid Thermal Damage in Grinding (MR95-182): SME Technical Paper.
169. Tönshoff, H.K., Karpuschewski, B., Wobker, H.-G., 1995b, Quality Control of Surface Integrity with Micromagnetic Techniques, Production Engineering, II: 203-206.
170. Tönshoff, H.K., Wobker, H.-G., Brandt, D., 1995c, Potential and Limitation of Hard Turning (MR95-215): SME Technical Paper.
171. Tönshoff, H.K., Lierse, T., 1996, Influence of Temperatures on Residual Stresses in Grinding Ceramics, Paper presented at the 4th European Conference on Residual Stresses.
172. Tönshoff, H.K., Karpuschewski, B., Borbe, C, 1997a, Comparison of Basic Mechanisms in Cutting and Grinding of Hardened Steel, Production Engineering, IV: 5-8.
173. Tönshoff, H.K., Karpuschewski, B., Hartmann, M., Spengler, C, 1997b, Grinding-and-Slicing Technique as an Advanced Technology for Silicon Wafer Slicing, Machining Science and Technology, 1:33-47.
174. Tönshoff, H.K., Kroos, F., Marzenell, C, 1997c, High-Pressure Water Peening - A New Mechanical Surface-Stréngthinging Process, Annals of the CIRP. 46/1:113-116.
175. Tönshoff, H.K., Mohlfeld, A., Leyendecker, T., Fuß, H.G., Erkens, G., Wenke, R., Cselle, T., Schwenck, M., 1997d, Wear Mechanisms of (Tii-x, AI)N Coatings in Dry Drilling, Surface and Coatings Technology, 94-95: 603-609.
176. Trogolo, J.A., Rajan, K., 1994, Near Surface Modification of Silica Structure Induced by Chemical/Mechanical Polishing, Journal of Materials Science, 29: 4554-4558.
177. Trumpold, H., Hattori, M., Tsutsumi, C, Melzer, C, 1994, Grinding Mode Identification by Means of Surface Characterization, Annals of the CIRP, 43/1:479-482.
178. Vatel, O., Tanimoto, M., 1995, Kelvin Probe Force Microscopy for Potential Distribution Measurement of Semiconductor Devices, Journal of Applied Physics, 77: 2358-2362.
179. Verhey, J., Bismayer, U., Guttler, B., Lundt, H., 1994, The Surface of Machined Silicon Wafers: a Raman Spectroscopic Study, Semiconductor Science and Technology, 9:404-408.
180. Vitali, G., Pizzuto, C, Zollo, G., Lucca, D.A., De Luca, L., 1996, Low-Power Pulsed-Laser Annealing of the Damaged Surface Layer of Chemomechanically Polished CdS, Japanese Journal of Applied Physics, 35: L1558-L1561.
181. Vorburger, T.V., Dagata, J.A., Wilkening, G., lizuka, K;, 1997, Industrial Uses of STM and AFM, Annals of the CIRP, 46/2: 597-620.
182. Vyvenko, O., Zozime, A., 1994, Cathodoluminescence Imaging of Dislocations in CdS: A New Defocussed-mirror Technique, Materials Science and Engineering B, 24:105-111.
183. Warren, P.D., Pecorari, C, Kolosov, O.V., Roberts, S.G., Briggs, G.A.D., 1996, Characterization of Surface Damage via Surface Acoustic Waves, Nanotechnology, 7: 295-301.
184. Weaver, J.M., Wickramasinghe, H.K., 1991, Semiconductor Characterization by Scanning Force Microscope Surface Photovoltage Microscopy, Journal of Vacuum Science and Technology B, 9:1562-1565.
185. Wei, L, Xu, H.H.K., Jahanmir, S., 1995, Evaluation of Thermal Wave Imaging for Detection of Machining Damage in Ceramics, NISTIR 5645.
186. Weirauch, D.F., 1985, A Study of Lapping and Polishing Damage in Single-Crystal CdTe, Journal of the Electrochemical Society, 132: 250-254.
187. Wobker, H.-G., Tönshoff, H.-K., Kroos, F., 1994, Process Design in Grinding of Advanced Ceramics, Advancement of Intelligent Production: 297-302.
188. Woodruff, D.P., Delchar, T.A., 1994, Modern Techniques of Surface Science (2nd ed.), Cambridge University Press, Cambridge.
189. Xu, H.H.K., Jahanmir, S., 1994, Simple Technique for Observing Subsurface Damage in Machining of Ceramics, Journal of American Ceramics Society, 77:1388-1390.
190. Xu, H.H.K., Jahanmir, S., Ives, L.K., 1996a, Material Removal and Damage Formation Mechanisms in Grinding Silicon Nitride, Journal of Materials Research, 11:1717-1724.
191. Xu, H.H.K., Wei, L, Jahanmir, S., 1996b, Influence of Grain Size on the Grinding Response of Alumina, Journal of the American Ceramic Society, 79:1307-1313.
192. Xu, H.H.K., Kelly, J.R., Jahanmir, S., Thompson, V.P., Rekow, E.D., 1997, Enamel Subsurface Damage Due to Tooth Preparation with Diamonds, Journal of Dental Research, 76:1698-1706.
193. Yasutake, M., Aoki, D., Fujihira, M., 1996, Surface Potential Measurements Using the Kelvin Probe Force Microscope, Thin Solid Films, 273: 279-283.
194. Young, R.D., 1975, Instrumentation for the Chemical Analysis of Manufactured Surfaces, Annals of the CIRP, 24/2: 549-554.
195. Zundel, T., Weber, J., Benson, B., 1988, Ultrafast Diffusion of a Defect in Indium-Doped Silicon Introduced by Chemomechanical Polishing, Applied Physics Letters, 53:1426-1428.