Surface integrity characterization and prediction in machining of hardened and difficult-to-machine alloys: A state-of-art research review and analysis

Machining Science and Technology

Volumn 13, Issue 4, 2009, Pages 437-470

  Guo, Y B ^a   Li, W ^a   Jawahir, I S ^b  

^a University of Alabama   (United States)

^b UNIVERSITY OF KENTUCKY   (United States)

Author keywords

Hard machining; Residual stress; Superalloys; Surface integrity

Indexed keywords

ART RESEARCH; HARD MACHINING; HARDENED STEEL; MULTI-SCALE SIMULATION; NICKEL- BASED SUPERALLOYS; POSSIBLE FUTURES; SURFACE INTEGRITY; TOOL WEAR;

COMPUTER SIMULATION; HARDENING; MACHINING; MARTENSITIC STAINLESS STEEL; NICKEL ALLOYS; QUALITY ASSURANCE; RESEARCH; SUPERALLOYS; TITANIUM;

RESIDUAL STRESSES;

EID: 73449102550     PISSN: 10910344     EISSN: 15322483     Source Type: Journal    
DOI: 10.1080/10910340903454922     Document Type: Article

References (68)

1. Arunachalam, R.M.; Mannan, M.A.; Spowage, A.C. (2004a) Residual stress and surface roughness when facing age hardened Inconel 718 with CBN and ceramic cutting tools. International Journal of Machine Tools & Manufacturing, 44: 879-887.
2. Arunachalam, R.M.; Mannan, M.A.; Spowage, A.C. (2004b) Surface integrity when machining age hardened Inconel 718 with coated carbide cutting tools. International Journal of Machine Tools & Manufacture, 44: 1481-1491.
3. Aspinwall, D.K.; Dewes, R.C.; Ng, E.-G.; Sage, C.; Soo, S.L. (2007) The influence of cutter orientation and workpiece angle on machinability when high-speed milling Inconel 718 under finishing conditions. International Journal of Machine Tools & Manufacture, 47: 1839-1846.
4. Axinte, D.A.; Dewes, R.C. (2002) Surface integrity of hot work tool steel after high speed millingexperimental data and empirical models. Journal of Materials Processing Technology, 127: 325-335.
5. Bammann, D.J. (1990) Modeling temperature and strain rate dependent large deformation of metals. Appl. Mech. Rev., 43: 312-319.
6. Bammann, D.J.; Chiesa, M.L.; Johnson, G.C. (1996) Modeling large deformation and failure in manufacturing process. In: Tatsumi, T., Wannabe, E., Kambe, T. (eds.), Theor. App. Mech.; pp. 359-376.
7. Barash, M.M.; Schoech, W.J. (1972) A semi-analytical model of the residual stress zone in orthogonal machining. Proc. 11th Int. MTDR Conf., Pergamon Press, London.
8. Behrens, A.; Kalisch, K.; Wulfsberg, J.P. (2004) Possibilities and problems of finite element simulation of high speed cutting mechanics. ASME/IMECE, MED, Anaheim, CA.
9. Benson, D.J. (1997) A mixture theory for contact in multi-material Eulerian formulations. Comput. Methods Appl. Mech. Engr., 140: 59-86.
10. Brinksmeier, E.; Cammett, J.T.; Konig, W.; Leskovar, P.; Peters, J.; Tonshoff, H.K. (1982) Residual stresses-measurement and causes in machining processes. Annals of the CIRP, 31(2): 491-510.
11. Brinksmeier, E.; Schneider, E.; Theiner, W.A.; Tönshoff, H.K. (1984) Nondestructive testing for evaluating surface integrity. Annals of the CIRP, 33(2): 489-509.
12. Campbell, J.D. (1973) Dynamic plasticity: macroscopic and microscopic aspects. Mater. Sci. Eng., 12: 3-21.
13. Chandrasekaran, H.; M'Saoubi, R.; Högman, B.; Nordh, L.G.; Coulon, B.; Lebrun, J.L.; Viale, D.; Gitton, S.; Montero, M.C.; Marques, M.J.; Outeiro, J.C.; Dias, A.M. (2005) Development of machinability enhanced tool steels for improved product economy in hard milling. In: Technical Steel Research-Report EUR 21726, EC, Brussels.
14. Chuzhoy, L.; DeVor, R.E.; Kapoor, S.G.; Beaudoin, A.J.; Bammann, D.J. (2003) Machining simulation of ductile iron and its constituents, Part 2: numerical simulation and experimental validation of machining. ASME J. Manuf. Sci. Eng., 125: 192-201.
15. Colwell, L.V.; Sinnot, M.J.; Tobin, J.C. (1955) The determination of residual stresses in hardened, ground steel. Trans. ASME, 77: 1099-1105.
16. Copper, D. (2006) Machining capacity, expertise must grow. In: SME/Aerospace & Defense Manufacturing, Manuf. Eng., 63-65.
17. Dahlman, P.; Gunnberg, F.; Jacobson, M. (2004) The influence of rake angle, cutting feed and cutting depth on residual stresses in hard turning. Journal of Materials Processing Technology, 147: 181-184.
18. Devarajan, N.; Asundi, M.K.; Somasundaram, S. (1984) Experimental method for predicting residual stresses due to turning in stainless steel. In: Experimental Techniques, August, 22-26.
19. Doman, D.A.; Warkentin, A.; Bauer, R. (2009) Finite element modeling approaches in grinding. International Journal of Machine Tools & Manufacture, 49: 109-116.
20. Dornfeld, D.; Min, S.; Takeuchi, Y. (2006) Recent advances in mechanical micromachining. Annals of the CIRP, 55/2: 1-24.
21. Ee, K.C.; Dillon, Jr. O.W.; Jawahir, I.S. (2005) Finite element modeling of residual stresses in machining induced by cutting tool with a finite edge radius. Int. J. Mech. Sci., 47: 1611-1628.
22. Elbestawi, M.A.; Chen, L.; Becze, C.E.; El-Wardany, T.I. (1997) High-speed milling of dies and molds in their hardened state. Annals of the CIRP, 46/1: 57-62.
23. El-Khabeery, M.M.; Fattouh, M. (1989) Residual stress distribution caused by milling. International Journal of Machine Tools & Manufacture, 29: 391-401.
24. Ezugwu, E.O. (2005) Key improvements in the machining of difficult-to-cut aerospace superalloys. Int. J. Machine Tools & Manufacture, 45: 1353-1367.
25. Field, M.; Kahles, J.F. (1964) The surface integrity of machined and ground high strength steels. DMIC Report, 210: 54-77.
26. Field, M.; Kahles, J.F. (1971) Review of surface integrity of machined components. Annals of the CIRP, 20(2): 153-162.
27. Field, M.; Koster, W.P.; Kohls, J.B.; Snider, R.E.; Maranchik, Jr., J. (1970) Machining of high strength steels with emphasis on surface integrity. In: Tech. Report AFMDC 70-71, Metcut Research Associates, Inc.
28. Follansbee, P.S.; Kocks, U.F. (1988) A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable. Acta Metall., 36: 81-93.
29. Goldstein, M. (1991) Optimierung der Fertigungsfolge 'kaltfließ pressen-spanen' durch hartdrehen als feinbearbeitungsverfahren für einsatzgehärtete preß-bauteile. Doctoral thesis, RWTH Aachen.
30. Guo, Y.B. (2000) Finite Element Analysis of Superfinish Hard Turning. Ph.D. Dissertation, Purdue University, West Lafayette, Indiana.
31. Guo, Y.B. (2003) An integral method to determine the mechanical behavior of materials in metal cutting. J. Mater. Proc. Tech., 142(1): 72-81.
32. Guo, Y.B.; Anurag, S. (2008) Finite element modeling and simulation of micromachining random multiphase materials. Trans. NAMRI/SME, 36: 373-380.
33. Guo, Y.B.; Anurag, S.; Jawahir, I.S. (2009) A novel hybrid predictive model and validation of unique hook-shaped residual stress profiles in hard turning. Annals of the CIRP, 58(1): 81-84.
34. Guo, Y.B.; Liu, C.R. (2002a) Mechanical properties of hardened AISI 521 steel in hard machining. ASME J. Manuf. Sci. Eng., 124: 1-9.
35. Guo, Y.B.; Liu, C.R. (2002b) FEM analysis of mechanical state on sequentially machined surfaces. Machining Science and Technology, 6: 21-41.
36. Guo, Y.B.; Liu, C.R. (2002c) 3D FEA modeling of hard turning. Journal of Manufacturing Science and Engineering, 124: 189-199.
37. Guo, Y.B.; Wen, Q. (2005) A hybrid approach to investigate chip morphology transition from sawtooth to discontinuous chips with the effects of cutting edge geometry. Trans. of NAMRI/SME, XXXIII: 469-476.
38. Guo, Y.B.; Wen, Q.; Horstemeyer, M.F. (2005) An internal state variable plasticity based approach to determine dynamic loading history effects on material property in manufacturing processes. Int. J. Mech. Sci., 47: 1423-1441.
39. Guo, Y.B.; Yen, D.W. (2003) A FEM study on mechanisms of discontinuous chip formation in hard machining. J. of Materials Proc. Tech., 155: 1350-1356.
40. Henriksen, E.K. (1951) Residual stresses in machined surfaces. Trans. ASME, 73: 69-76.
41. Hong, H.; Riga, A.T.; Cahoon, J.M. (1993) Machinability of steels and titanium alloys under lubrication. Wear, 162: 34-39.
42. Hou, Z.B.; Komanduri, R. (1997) Modeling of thermomechanical shear instability in machining. Int. J. Mech. Sci., 39: 1273-1314.
43. Hsu, H.C. (1992) An Elasto-Viscoplastic Finite Element Model of Orthogonal Metal Cutting for Residual Stress Prediction. Ph.D. Dissertation, North Carolina State University, Rayleigh, USA.
44. Hughes, J.I.; Sharman, A.R.C.; Ridgway, K. (2005) The effect of cutting tool material and edge geometry on tool life and workpiece surface integrity. Proc. IMechE, Part B: Journal of Engineering Manufacture, 220: 93-107.
45. Jeelani, S.; Bailey, J.A. (1986) Residual stress distribution in machining annealed 18 percent nickel maraging steel. ASME Journal of Engineering Materials and Technology, 108: 93-98.
46. Jeelani, S.; Biswas, S.; Natarajan, R. (1986) Effect of cutting speed and tool rake angle on residual stress distribution in machining 2024-T351 aluminium alloy: a study of cumulative fatigue damage in AISI 4130 steel. J. of Material Science, 21: 2705-2710.
47. Johnson, G.R.; Cook, W.H. (1985) Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Eng. Frac. Mech., 21: 31-48.
48. Kahles, J.F.; Field, M.; Eylon, D.; Froes, F.H. (1985) Machining of titanium alloys. Journal of Metals, 37: 27-35.
49. Klocke, F.; Brinksmeier, E.; Weinert, K. (2005) Capability profiles of hard cutting and grinding processes. Annals of the CIRP, 54(2): 557-580.
50. Konig, W.; Klinger, M.; Link, R. (1990) Machining hard materials with geometrically defined cutting edges-field of applications and limitations. Annals of the CIRP, 39(1): 61-64.
51. Koster, W.P.; Filed, M.; Fritz, L.J.; Gatto, L.R.; Kahles, J.F. (1970) Surface integrity of machined structural components. Tech. Report AFML-TR-70-111, Metcut Research Associates, Inc.
52. Liu, C.R.; Barash, M.M. (1976a) The mechanical state of the sublayer of a surface generated by chip-removal process, Part 1: cutting with a sharp tool. Trans. ASME, J. Eng. Ind., 98(4): 1192-1201.
53. Liu, C.R.; Barash, M.M. (1976b) The mechanical state of the sublayer of a surface generated by chip-removal process, Part 2: cutting with a tool with flank wear. Trans. ASME, J. Eng. Ind., 98/4: 1202-1208.
54. Liu, C.R.; Barash, M.M. (1982) Variables governing patterns of mechanical residual stress in a machined surface. Trans. ASME, J. Eng. Ind., 104(3): 257-264.
55. Liu, C.R.; Guo, Y.B. (2000) Finite element analysis of the effect of sequential cuts and tool-chip friction on residual stresses in a machined layer. International Journal of Mechanical Sciences, 42: 1069-1086.
56. Lu, J. (1996) Handbook of Measurement of Residual Stresses. The Fairmont Press, Inc., Lilburn, GA.
57. Lucca, D.A.; Brinksmeier, E.; Goch, G. (1998) Progress in assessing surface and subsurface integrity. Annals of the CIRP, 47(2): 669-693.
58. Maekawa, K.; Shirakashi, T.; Usui, E. (1983) Flow stress of low carbon steel at high temperature and strain rate, Part 2: flow stress under variable temperature and variable strain rate. Bull. Japan Soc. Prec. Eng., 17: 167-172.
59. Marques, M.J.; Outeiro, J.C.; Dias, A.M.; M'Saoubi, R.; Chandrasekaran, H. (2006) Surface integrity of H13 ESR mould steel milled by carbide and CBN tools. Materials Science Forum: 514-516, 564-568.
60. Matsumoto, Y.; Barash, M.M.; Liu, C.R. (1986) Effect of hardness on the surface integrity of AISI 4340 steel. Journal of Engineering for Industry, 108: 169-175.
61. Matsumoto, Y.; Hashimoto, F.; Lahoti, G. (1999) Surface integrity generated by precision hard turning. Annals of the CIRP, 48(1): 59-62.
62. Movahhedy, M.R.; Altintas, Y.; Gadala, M.S. (2002) Numerical analysis of metal cutting with chamfered and blunt tools. J. Manuf. Sci. Eng., 124: 178-188.
63. M'Saoubi, R.; Outeiro, J.C.; Chandrasekaran, H.; Dillon, Jr. O.W.; Jawahir, I.S. (2008) A review of surface integrity in machining and its impact on functional performance and life of machined products. Int. J. Sustainable Manufacturing, 1(1-2): 203-236.
64. Narutaki, N.; Murakoshi, A.; Motonishi, S. (1983) Study on machining of titanium alloys. Annals of the CIRP, 32(1): 65-69.
65. Nasr, Mohamed N.A.; Ng, E.-G.; Elbestawi, M.A. (2007) Modeling the effects of tool-edge radius on residual stresses when orthogonal cutting AISI 316L. International Journal of Machine Tools & Manufacture, 47: 401-411.
66. Obikawa, T.; Sasahara, H.; Shirakashi, T. (1997) Application of computational machining method to discontinuous chip formation. Journal of Manufacturing Science and Engineering, 119: 667-674.
67. Outeiro, J.C.; Dias, A.M.; Jawahir, I.S. (2006) On the effects of residual stresses induced by coated and uncoated cutting tools with finite edge radii in turning operations. Annals of the CIRP, 55/1: 111-116.
68. Outeiro, J.C.; Pina, J.C.; M'Saoubi, R.; Pusavec, F.; Jawahir, I.S. (2008) Analysis of residual stresses induced by dry turning of difficult-to-machine materials. Annals of the CIRP Manufacturing Technology, 57: 77-80.