Workpiece surface integrity

Machining: Fundamentals and Recent Advances

Volumn , Issue , 2008, Pages 59-96

  Rech, Joël ^a   Hamdi, Hédi ^a   Valette, Stéphane ^b  

^a UNIVERSITÉ DE LYON   (France)

^b LABORATOIRE DE TRIBOLOGIE ET DYNAMIQUE DES SYSTÈMES   (France)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 73349139077     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-1-84800-213-5_3     Document Type: Chapter

References (102)

1. Metcut research associates (1980) Machining data handbook. Institute of Advanced Manufacturing Sciences, Cincinnati, USA.
2. Barbacki A, Kawalec M, Hamrol A (2003) Turning and grinding as a source of microstructural changes in the surface layer of hardened steel. J Mater Process Technol 133:21-25.
3. Saravanapriyan S N A, Vijayaraghavan L, Krishnamurthy R (2003) Significance of grinding burn on high speed steel tool performance. J Mater Process Technol 134:166-173.
4. Guo YB, Sahni J (2004) A comparative study of hard turned and cylindrically ground white layers. Int J Machine Tools Manuf 44:135-145.
5. Silva FS (2003) Analysis of a vehicle crankshaft failure. Eng Failure Anal 10:605-616.
6. Wang JY, Liu CR (1999) The effect of tool wear on the heat transfer, thermal damage and cutting mechanics in finish hard turning. Ann CIRP 48/1:53-58.
7. Denkena B, Toenshoff HK, Muller C, Zenner H, Renner F, Koehler M (2002) Fatigue strength of hard turned components. Proc International Conference ICMEN, 3-4 October 2002, Sani, Greece.
8. Smith S, Melkote SN, Lara-Curzio E, Watkins TR, Allard L, Riester L (2007) Effect of surface integrity of hard turned AISI 52100 steel on fatigue performance. Mater Sci Eng A 459:337-346.
9. Field D, Kahles JF (1964) The surface integrity of machined and high strength steels. DMIC Rep 210:54-77.
10. Griffiths B (2001) Manufacturing surface technology. Penton, ISBN 1-8571-8029-1.
11. Tonshoff HK, Brinksmeier E (1980) Determination of the mechanical and thermal influences on machined surfaces by microhardness and residual stress analysis. Ann CIRP 29/2:519-530.
12. Rech J, Moisan A (2003) Surface integrity in finish hard turning of case hardened steel. Int J Machine Tool Manuf 43/5:543-550.
13. Rech J, Kermouche G, Carcia-Rosales C, Khellouki A, Garcia-Navas V (2008) Characterization and modelling of the residual stresses induced by belt finishing and honing on a AISI52100 hardened steel. J Mater Process Technol, accepted for publication in 2008.
14. Seiler W, Reilhan F, Gounet-Lespinasse F, Lebrun JL (1998) Détermination du profil de contraintes résiduelles dans les gorges galetées de vilebrequins. J Phys 8:139-146.
15. Kristoffersen H, Vomacka P (2001) Influence of process parameters for induction hardening on residual stresses. Mater Des 22:637-644.
16. Brinksmeier E, Solter J, Grote C (2007) Distortion engineering - Identification of causes for dimensional and form deviations of bearings rings. Ann CIRP 56/1:109-112.
17. Rech J, Hamdi H (2005) Internal report about the modelling of part distortion due to residual stresses induced by thermo-mechanical loads, Ecole Nationale d'Ingénieurs de Saint-Etienne (France).
18. Denkena B, Reichstein M, de Leon Garcia L (2007) Milling induced residual stresses in structural parts out of forged aluminium alloys, proceedings of the 6th international conference on HSM 2007, San Sebastian.
19. Dattoma V, De Giorgi M, Nobile R (1986) On the evolution of welding residual stress after milling and cutting machining. Comput Struct 84:1965-1976.
20. Matsumoto Y, Hashimoto F, Lahoti G (1999) Surface integrity generated by precision hard turning, Ann CIRP 48/1:59-62.
21. Schwach DW, Guo YB (2005) Feasibility of producing optimal surface integrity by process design in hard turning. Mater Sci Eng A, 395:116-123.
22. Schwach DW, Guo YB (2005) A fundamental study of surface integrity by hard turning on rolling contact fatigue. Trans NAMRI/SME 33:541-548
23. Brunet S (1991) Influence des contraintes résiduelles induites par usinage sur la tenue en fatigue des matériaux métalliques aéronautiques. PhD Thesis, ENSAM Paris.
24. Coulon A (1983) Effect of the honing drum upon the inducement of compressive residual stresses. J Mech Working Technol 8:161-169.
25. Brinksmeier E, Lucca A, Walter A (2004) Chemical aspects of machining processes. Ann CIRP 53/2:685.
26. Mainsah E, Greenwood JA, Chetwynd DG (2001) Metrology and properties of engineering surfaces. Kluwer Academic, Norwell, ISBN 0-412-80640-1.
27. Stephenson DA, Agapiou JS (2006) Metal cutting theory and practice. Taylor and Francis, London, ISBN 978-0-8247-5888-2.
28. Enache S (1972) La qualité des surfaces usinées, Dunod, Paris.
29. Mahdi M, Zhang LC (1999) Residual stresses in ground components caused by coupled thermal and mechanical plastic deformation. J Mater Process Technol 95:238-245.
30. Mahdi M, Zhang L (1999) Applied mechanics in grinding. Part 7: residual stresses induced by the full coupling of mechanical deformation, thermal deformation and phase transformation. Int J Mach Tools Manuf 39:1285-1298.
31. Mahdi M, Zhang L (1998) Applied mechanics in grinding. Part 6: residual stresses and surface hardening by coupled thermo-plasticity and phase transformation. Int J Mach Tools Manuf 38:1289-1304.
32. Poulachon G, Moisan A, Jawahir IS (2001) On modelling the influence of thermomechanical behaviour in chip formation during hard turning of 100Cr6 bearing steel. Ann CIRP 50/1:31-36.
33. Poulachon G, Moisan A, Dessoly M (2002) A contribution to the study of the cutting mechanisms in hard turning. Mécanique Ind 3/4:291-299.
34. Hamdi H, Zahouani H, Bergheau JM (2004) Residual stresses computation in a grinding process. J Mater Process Technol 147:277-285.
35. Hamdi H, Dursapt M, Zahouani H (2004) Characterization of abrasive grain's behaviour and wear mechanisms. Wear 254/12:1294-1298.
36. Brinksmeier E, Brockhoff T (1999) White layers in machining steels, Proceedings of the 2nd International Conference on HSM, Darmstadt.
37. El-Wardany TI, Kishawy HA, Elbestawi MA (2000) Surface integrity of die material in high speed hard machining - part 2: microhardness variations and residual stresses. Trans ASME 122:632-641.
38. Attanasio A, Ceretti E, Giardini C (2007) 3D simulation of residual stresses in turning operations, Proceedings of the 1st international conference on sustainable manufacturing, 17-18 October 2007, Montreal (Canada).
39. Leblond JB, Pont D, Devaux J, Bru D, Bergheau JM (1997) Metallurgical and mechanical consequences of phase transformations in numerical simulations of welding processes. Modelling in Welding, Hot Powder Forming and Casting, Chapter 4, edited by Pr Lennart Karlsson. ASM International, pp. 61-89.
40. Devaux J, Mottet G, Bergheau JM, Bhandari S, Faidy C (2000) Evaluation of the integrity of PWR bi-metallic welds. ASME J Pressure Vessel Technol 122/3:368-373.
41. Obikawa T, Sasahara H, Shirakashi T, Usui E (1997) Application of computational machining method to discontinuous chip formation. J Manuf Sci Eng 119:667-674.
42. Chen L, El-Wardany TI, Harris WC (2004) Modelling the effects of flank wear and chip formation non residual stresses. Ann CIRP 53/1:95-98.
43. Shet C, Deng X (2003) Residual stresses and strains in orthogonal metal cutting. Int J Machine Tools Manuf 43:573-587.
44. Umbrello, D. M'Saoubi, R. Outeiro, J. C. (2007) The influence of Johnsson-Cook material constant on finite element simulation of machining of AISI 316L steel. Int J Machine Tools Manuf 47:462-470.
45. Marusich TD, Ortiz M (1995) Modelling and simulation of high speed machining. Int J Numer Methods Eng 38:3675-3694.
46. Salio M, Berruti T, De Poli G (2006) Prediction of residual stress distribution after turning in turbine disks. Int J Mech Sci 48:976-984.
47. Strenkowski JS, Athevale SM (1997) A partially constrained eulerian orthogonal cutting model for chip control tools. J Manuf Sci 119:681-688.
48. El-Wardany TI, Kishawy HA, Elbestawi MA (2000) Surface integrity of die material in high speed hard machining - part 2: microhardness variations and residual stresses. Trans ASME 122:632-641.
49. Nasr M N A, Ng EG, Elbestawi MA (2007) Modelling the effects of tool-edge radius on residual stresses when orthogonal cutting AISI316L. Int J Machine Tools Manuf 47:401-411.
50. Mamalis AG, Horvath M, Branis AS, Manolakos DE (2001) Finite element simulation of chip formation in orthogonal metal cutting. J Mater Process Technol 110:19-27.
51. Sun JS, Lee KH, Lee HP (2000) Comparison of implicit and explicit finite element methods for dynamic problems. J Mater Process Technol 105:110-118.
52. Valiorgue F, Rech J, Hamdi H, Gilles P, Bergheau JM (2007) A new approach for the modelling of residual stresses induced by turning of 316L. J Mater Process Technol 191:270-273.
53. Zemzemi F, Rech J, Ben Salem W, Kapsa P, Dogui A (2007) Development of a friction model for the tool-chip-workpiece interface during dry machining of AISI4142 steel with TiN coated carbide cutting tools. Int J Mach Machinability Mater 2/3-4:361-367.
54. Kevin Chou Y, Evans CJ (1999) White layers and thermal modelling of hard turned surfaces. Int J Mach Tools Manuf 39:1863-1881.
55. Ulutan D, Erdem Alaca B, Lazoglu I (2007) Analytical modelling of residual stresses in machining. J Mater Process Technol 183:77-87.
56. Yu XX, Lau WS, Lee TC (1997) A finite element analysis of residual stresses in stretch turning. Int J Machine Tools Manuf 37/10:1525-1537.
57. Lortz W (1979) A model of the cutting mechanism in grinding. Wear 53:115-128.
58. Wang H, Subhash G (2002) An approximate upper bound approach for single-grit rotating scratch with conical toll on pure metal. Wear 252:911-933.
59. Matsuo T, Toyoura S, Oshima E, Ohbuuchi Y (1989) Effect of grain shape on cutting force in superabrasive single-grit tests. Ann CIRP 38/1:323-326.
60. Brinksmeier E, Giwerzew A (2003) Chip formation mechanisms in grinding at low speeds. Ann CIRP 52/1:253-258.
61. Sosa AD, Echeverria MD, Moncada OJ, Sikora JA (2007) Residual stresses, distortion and surface roughness produced by grinding thin wall ductile iron plates. Int J Machine Tools Manuf 47:229-235.
62. Abrao AM, Aspinwall DK (1996) The surface integrity of turned and ground hardened bearing steel. Wear, 196:279-284.
63. Grum J (2001) A review of the influence of grinding conditions on resulting residual stresses after induction surface hardening and grinding. J Mater Process Technol 114:212-226.
64. Klocke F, Brinksmeier E, Evans C, Howes T, Inasaki I, Minke E, Toenshoff HK, Webster JA, Stuff D (1997) High-speed grinding: fundamentals and state of the art in Europe, Japan, and the USA. Ann CIRP 46/2:715-724.
65. Moulik PN, Yang H T Y, Chandrasekar S (2001) Simulation of thermal stresses due to grinding. Int J Mech Sci 43:831-851.
66. Xu XP, Yu YQ, Xu HJ (2002) Effect of grinding temperatures on the surface integrity of a nickel-based superalloy. J Mater Process Technol 129:359-363
67. Henrisken EK (1951) Residual stresses in machined surface. Trans ASME 73:69-76.
68. M'Saoubi R, Outeiro JC, Changeux B, Lebrun JL, Dias AM (1999) Residual stress analysis in orthogonal machining of standard and resulfurized AISI 316L steels. J Mater Process Technol 96:225-233.
69. Franz HE (1979) Bestimmung des Eignespannungen an deflieniert bearbeiteten oberflächen des Werkstoffe TiAl6v and TiAl6VSn2. Techn Mitt 34:1-37.
70. Arunachalam RM, Mannan MA, Spowage AC (2004) Residual stress and surface roughness when facing age hardened Inconel 718 with CBN and ceramic cutting tools. Int J Mach Tools Manuf 44:879-887.
71. Schlauer C, Peng RL, Oden M (2002) Residual stresses in a nickel based superalloy introduced in turning. Mater Sci Forum 404-407:173-178.
72. Sharman A R C, Hughes JI, Ridgway K (2006) An analysis of the residual stresses generated in Inconel 718 when turning. J Mater Process Technol 173:359-367.
73. Tsuchida K, Kawada Y, Kodama S (1975) A study on residual stresses distribution by turning. Bull JSME 18/116.
74. Jouan M (1986) Influence des paramètres d'usinage de tournage sur les contraintes résiduelles mesurées par diffraction de rayons X. Mémoire CNAM.
75. Liu CR, Barash MM (1982) Variable governing patterns of mechanical stresses in a machined surface. J Eng Ind 104:257-264.
76. Outeiro JC, Dias AM (2006) Influence of workmaterial properties on residual stresses and work hardening induced by machining. Mater Sci Forum 524-525:575-580
77. Schreiber E, Schlicht H (1986) Residual stresses after turning of hardened components. Proc ICRS1 - Garmisch 2:853-860.
78. Capello E (2005) Residual stresses in turning part 1: influence of process parameters. J Mater Process Technol 160:221-228.
79. Agha SR, Liu CR (2000) Experimental study on the performance of superfinishing hard turned surfaces in rolling contact. Wear 244:52-59.
80. Liu M, Takagi J, Tsukuda A (2004) Effect of nose radius and tool wear on residual stress distribution in hard turning of bearing steel. J Mater Process Technol 150:234-241.
81. Dahlman P, Gunnberg F, Jacobson M (2004) The influence of rake angle, cutting feed and cutting depth on residual stresses in hard turning. J Mater Process Technol 147:181-184.
82. Thiele JD, Melkote SN (1999) The effect of tool edge geometry on workpiece subsurface deformation and through-thickness residual stresses for hard turning of AISI52100. Trans NAMRI/SME 27:135-140.
83. Zhou JM, Walter H, Andersson M, Stahl JE (2003) Effect of Chamfer angle on wear of PCBN cutting tool. Int J Mach Tools Manuf 43:301-305.
84. Rech J, Claudin C (2008) Influence of cutting tool constitutive parameters on residual stresses induced by hard turning. Int J Mach Machinability Mater.
85. Hua J, Shivpuri R, Cheng X, Bedekar V, Matsumoto Y, Hashimoto F, Watkins TR (2005) Effect of feed rate, workpiece hardness and cutting edge on subsurface residual stress in the hard turning of bearing steel using chamfer + hone cutting edge geometry. Mater Sci Eng 394:238-248.
86. Choi, Y. Liu, C. R. (2006) Rolling contact fatigue life of finish hard materials surfaces. Part 2. Experimental verification. Wear 261:492-499.
87. Liu CR, Mittal S (1998) Optimal pre-stressing the surface of a component by superfinish hard turning for maximum fatigue life in rolling contact. Wear 219:128-140.
88. Scholtes B (1987) Residual stresses induced by machining. Adv Surf Treat 4:59-71.
89. Fuh KH, Wu CF (1995) A residual-stress model for the milling of aluminium alloy (2014-T6). J Mater Process Technol 51:87-105.
90. Rao B, Shin YC (2001) Analysis on high-speed face-milling of 7075-T6 aluminium using carbide and diamond cutters. Int J Mach Tools Manuf 41:1763-1781.
91. Hoffmann J, Starker P, Macherauch E (1982) Bearbeitunsgeigenspannungen, Eigenspannungen und Lastspannungen. Carl Hanser Verlag, Munich, pp. 84-91.
92. Weber H, Lutze HG, Zimmermann P, Höfer U (1980) Einfluss des Bearbeitungsparameter auf die Bearbeitungspannungen, Wissenschaftliche Zeitschift der Technischen Hochschule Karl Marx Stadt, pp. 15-24.
93. Bouzid Saï W, Ben Salah N, Lebrun JL (2001) Influence of machining by finishing milling on surface characteristics. Int J Mach Tools Manuf 41:443-450.
94. Chevrier P, Tidu A, Bolle B, Cezard P, Tinnes JP (2003) Investigation of surface integrity in high speed end milling of a low alloyed steel. Int J Mach Tools Manuf 43:1135-1142.
95. Axinte DA, Dewes RC (2002) Surface integrity of hot work tool steel after high speed milling - experimental data and empirical models. J Mater Process Technol 127:325-335.
96. Aspinwall DK, Dewesa RC, Ng EG, Sage C, Soo SL (2007) The influence of cutter orientation and workpiece angle on machinability when high-speed milling Inconel 718 under finishing conditions. Int J Mach Tools Manuf 47:1839-1846.
97. Rech J, Kermouche G, Carcia-Rosales C, Khellouki A, Garcia-Navas V (2008) Characterization and modelling of the residual stresses induced by belt finishing on a AISI52100 hardened steel. J Mater Process Technol doi:10.1016/j.jmatprotec.2007.12.133
98. El Mansori M, Sura E, Ghidossi P, Deblaise S, Dal Negro T, Khanfir H (2007) Toward physical description of form and finish performance in dry belt finishing process by a tribo-energetic approach. J Mater Process Technol 182:498-511.
99. Axinte DA, Kritmanorot M, Gindy N N Z (2005) Investigations on belt polishing of heat-resistant titanium alloys. J Mater Process Technol 166:398-404.
100. Yahata N (1987) Effect of lapping on the fatigue strength of a hardened 13Cr-0.34C stainless steel. Wear 115:337-348.
101. Mathews PG, Shunmugam MS (1999) Neural-network approach for predicting hole quality in reaming. Int J Mach Tools Manuf 39:723-730.
102. Klocke F, Liermann J (1998) Roller burnishing of hard turned surface. Int J Mach Tools Manuf 38/5-6:419-423.