The machining of γ-TiAl intermetallic alloys

CIRP Annals - Manufacturing Technology

Volumn 54, Issue 1, 2005, Pages 99-104

  Aspinwall, D K ^a   Dewes, R C ^a   Mantle, A L ^b  

^a UNIVERSITY OF BIRMINGHAM   (United Kingdom)

^b ROLLS ROYCE PLC   (United Kingdom)

Author keywords

Integrity; Machinability; Titanium

Indexed keywords

CRACKS; MACHINABILITY; MACHINING; STRAIN HARDENING; SURFACES; THERMAL EFFECTS; TITANIUM; TURNING;

INTEGRITY; INTERMETALLIC ALLOYS; PHASE MATERIALS; SMEARING;

INTERMETALLICS;

EID: 21944433315     PISSN: 00078506     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0007-8506(07)60059-6     Document Type: Article

References (54)

1. th World Conf. on Titanium, IV, 2123-2136.
2. Rugg, D., 1999, Titanium aluminides, great potential - but not yet flying, Gamma Titanium Aluminides, Minerals Metals & Materials Society, 11-14.
3. Cheng, T.T., Hu, D., Loretto, M.H., Jones, I.P., 1999, γ-TiAl alloy development, Proc. of Euromat 99, Intermetallics and Superalloys, 10, 246-250.
4. Personal communication with M.H. Loretto, 2004.
5. Larsen, J.M., Worth, B.D., Balsone, S.J., Jones, J.W., 1995, An overview of the structural capability of available gamma titanium aluminide alloys, Gamma Titanium Aluminides, Proc. of TMS 95, 812-834.
6. Vaidya, W.V, Schwalbe, K-H., Wagner, R., 1995, Understanding the fatigue resistance of gamma titanium aluminide, Gamma Titanium Aluminides, Proc. of TMS 95, 867-874.
7. Mantle, A.L., Aspinwall, D.K., 1996, Surface integrity and fatigue life of turned gamma titanium aluminide, J. of Materials Proc. Technology, 72, 413-420.
8. Bentley, S.A., Mantle, A.L., Aspinwall, D.K., 1999, The effect of machining on the fatigue strength of γ TiAl intermetallic alloy, Intermetallics, 7, 967-969.
9. Sharman, A.R.C., Aspinwall, D.K., Dewes, R.C., Clifton, D., Bowen, P., 2001, The effects of machined workpiece surface integrity on the fatigue life of γ-TiAl, Int. J. of Machine Tools and Manufacture, 41, 1681-1685.
10. Rahman, M., Wong, Y.S., Zareena, A.R., 2003, Machinability of titanium alloys, JSME Series C, 46(1), 107-115.
11. Corduan, N., Himbert, T., Poulachon, G., Dessoly, M., Lambertin, M., Vigneau, J., Payoux, B., 2003, Wear mechanisms of new tool materials for Ti-6Al-4V high performance machining, CIRP Annals, 52/1, 73-76.
12. th World Conf. on Titanium, IV, 2293-2300.
13. th Int. Conf. on Behaviour of Materials in Machining, 35-42.
14. th World Conf. on Titanium, IV, 2185-2192.
15. Aust, E., Niemann, H.R., 1999, Machining of γ-TiAl, Advanced Engineering Materials, VI(1), 53-57.
16. Zhang, H., 1995, Investigation of machinability of titanium aluminide, PhD. Thesis, The University of Birmingham, restricted access.
17. th Int. MATADOR Conf., 111-118.
18. Zhang, H., Wise, M.L.H., Aspinwall, D.K., Aspinwall, E.M., 1994, Investigation of machinability of a HIPed gamma titanium aluminide, Proc of TMS Symposium, Materials Issues in Machining, II, 89-104.
19. st MATADOR Conf., 217-221.
20. Mantle, A.L., 1998, The machining of gamma titanium aluminide intermetallics, PhD. Thesis, The University of Birmingham, restricted access.
21. Sharman, A.R.C., 2001, An investigation into the effects of machining on the surface integrity and fatigue life of gamma based titanium aluminides, PhD. Thesis, The University of Birmingham, restricted access.
22. th World Conf. in Titanium, 248-255.
23. rd Int. Conf. on Progress of Cutting and Grinding, III, 63-68.
24. th Irish Manufacturing Conf., 427-436.
25. th Int. Symposium on Automotive Technology and Automation, ISATA, 619-626.
26. th Int. Conf. on Behaviour of Materials in Machining, 300-308.
27. th NAMRC, 161-166.
28. Sharman, A.R.C., Aspinwall, D.K., Dewes, R.C., Bowen, P., 2001, Workpiece surface integrity considerations when finish turning gamma titanium aluminide, Wear, 249, 473-481.
29. Sharman, A.R.C., Li, X.P., Rahman, M., Bowen, P., Dewes, R.C., Aspinwall, D.K., 2001, Ultrasonic assisted turning of gamma titanium aluminide, Proc. of ISEM XIII, II, 939-951.
30. Howitt, I.J., 2001, Turnmilling of gamma titanium aluminide using small diameter ball nose end mills, Undergraduate Final Year Report, Mechanical Engineering, University of Birmingham.
31. Nolan, T.C., 1991, Wet surface grinding of NiAl, 809, 817 and TIAl General Electric Internal Evaluation Bulletin AD91179.
32. Jones, P.E., Smits, D., Eylon, D., Smits, C., 1995, Centerless grinding of TiAl using conventional grinding wheels, Proc. of the Int. Symposium on gamma titanium aluminide (ISTGA 95).
33. th World Conf. on Titanium, 497-503.
34. Nelson, L., Xu, H.H.K., Danyluk, S. Jahanmir, S., 1997, Subsurface damage in grinding TiAl, Machining Science and Technology, 1 (2), 289-297.
35. Nelson, L., 1997, Subsurface damage in the abrasive machining of titanium aluminide (γ), Doctoral dissertation, Georgia Institute of Technology.
36. nd Int. MATADOR Conf., 331-336.
37. th Int. Charles Parsons Turbine Conf., 474-488.
38. Nelson, L., Kurfess, T., Razavi, H.A., Danyluk, S., 1999, Generating and modelling subsurface damage in grinding gamma Ti-48Al, Machining Science and Engineering, 10, 467-472.
39. Bentley, S.A., Lim, S.Z., Aspinwall, D.K., 1999, The effect of wheel dressing parameters on the surface integrity of a surface ground gamma titanium aluminide intermetallic alloy, Proc. of Euromat 99, 10, 216-221.
40. Bentley, S.A., Goh, N.P., Aspinwall, D.K., 1999, Reciprocating surface grinding of a gamma titanium aluminide intermetallic alloy, Proc. of the Int. Conf. on Advances in Materials and Processing Technologies AMPT 99, 1, 427-435.
41. rd Int. MATADOR Conf., 439-446.
42. Bentley, S.A., 2000, Surface and creep feed grinding of gamma titanium aluminide, PhD. Thesis, The University of Birmingham, restricted access.
43. Razavi, H. A., Kurfess, T.R., Danyluk, S., 2003, Force control grinding of gamma TiAl, Int. J. of Machine Tools and Manufacture, 43, 185-191.
44. Harding, R., 1997, Machinability of titanium aluminide (conventional end milling), Undergraduate Final Year Report, Mechanical Engineering, University of Birmingham.
45. th Int. Conf. on Progress in Cutting and Grinding, 89-94.
46. Aspinwall, D.K., Dewes, R.C., Mantle, A.L., Ng, E.G., 1998, High speed milling of advanced aerospace alloys and hardened mould/die steels, Proc. of Sharing Tomorrow's Technology Today Seminar, ISBN-0-907348-04-1, 21 pages.
47. Mantle, A.L., Aspinwall, D.K., 1999, Cutting force evaluation when high speed end milling a gamma titanium aluminide intermetallic alloy, Proc. of Euromat 99, 10, 209-215.
48. Mantle, A.L., Aspinwall, D.K, 2001, Surface integrity of a high speed milled gamma titanium aluminide, J. of Materials Proc. Technology, 118, 143-150.
49. Chan, W.K., 1998, Temperature analysis when high speed machining gamma titanium aluminide, Undergraduate Final Year Report, Mechanical Engineering, University of Birmingham.
50. th Irish Manufacturing Conf., 229-236.
51. Aspinwall, D.K., Kasuga, Y., Mantle, A.L., 2001, The use of ultrasonic machining for the production of holes in γ-TiAl, Proc. of ISEM XIII, 925-937.
52. rd Int. Conf. on the Behaviour of Materials in Machining, 138-151.
53. th Irish Manufacturing Conf., 443-450.
54. Clifton, D., Mount, A.R., Jardine, D.J., Roth, R., 2001, Electrochemical machining of gamma titanium aluminide intermetallics, J. of Materials Proc.Technology, 108, 338-348.