A review of surface integrity in machining and its impact on functional performance and life of machined products

International Journal of Sustainable Manufacturing

Volumn 1, Issue 1-2, 2008, Pages 203-236

  M'Saoubi, R ^a   Outeiro, J C ^b   Chandrasekaran, H ^c   Dillon Jr , O W ^d   Jawahir, I S ^d  

^a SECO TOOLS AB   (Sweden)

^b CATHOLIC UNIVERSITY OF PORTUGAL   (Portugal)

^c SWEREA KIMAB   (Sweden)

^d Un Iversity of Kentucky   (United States)

Author keywords

Fatigue life; Product life; Residual stresses; SI; Surface Integrity

Indexed keywords

FATIGUE OF MATERIALS; NICKEL ALLOYS; SILICON; TITANIUM ALLOYS;

AUTOMOTIVE APPLICATIONS; FUNCTIONAL PERFORMANCE; HARDENED STEEL; MACHINED COMPONENTS; PREDICTIVE MODELS; PRODUCT LIFE; SURFACE ALTERATION; SURFACE INTEGRITY;

RESIDUAL STRESSES;

EID: 73449110054     PISSN: 17427223     EISSN: 17427231     Source Type: Journal    
DOI: 10.1504/IJSM.2008.019234     Document Type: Review

References (128)

1. Akcan, S., Shah, W.I.S., Moylan, S.P., Chandrasekar, S., Chabra, P.N. and Yang, H.T.Y. (2002) 'Formation of white layers in steels by machining and their characteristics', Metallurgical and Materials Transactions A, Vol. 33, No. 4, pp. 1245-1254. (Pubitemid 34474969)
2. ANSI B211.1 (1986) American National Standards on Surface Integrity.
3. Arunachalam, R.M. and Mannan, M.A. (2000) 'Machinability of nickel-based high temperature alloys', Machining Science and Technology, Vol. 4, No. 1, pp. 127-168. (Pubitemid 30589587)
4. Arunachalam, R.M., Mannan, M.A. and Spowage, A.C. (2004a) 'Residual stress and surface roughness when facing age hardened inconel 718 with CBN and ceramic cutting tools', International Journal of Machine Tools and Manufacture, Vol. 44, pp. 879-887.
5. Arunachalam, R.M., Mannan, M.A. and Spowage, A.C. (2004b) 'Surface integrity when machining age hardened inconel 718 with coated carbide cutting tools', International Journal of Machine Tools and Manufacture, Vol. 44, pp. 1481-1491.
6. Aspinwall, D.K., Dewes, R.C. and Mantle, A.L. (2005) 'The machining of γ-TiAl intermetallic alloys', Annals of the CIRP, Vol. 54, No. 1, pp. 95-98.
7. Axinte, D.A. and Dewes, R.C. (2002) 'Surface integrity of hot work steel after high speed milling-experimental data and empirical models', J. Materials Processing Technology, Vol. 127, pp. 325-335.
8. Bailey, J.A. and Jeelani, S. (1974) 'Surface integrity in machining 18% nickel maraging steel', ASME Transactions, pp. 74-185.
9. Bailey, J.A. and Jeelani, S. (1975) 'Determination of subsurface plastic strain in machining, using a embossed grad', Wear, Vol. 36, No. 2, pp. 199-206.
10. Bailey, J.A., Jeelani, S. and Becker, S.E. (1976) 'Surface integrity in machining AISI 4340 steel', ASME J. Eng. Industry, Vol. 98, No. 3, pp. 999-1007.
11. Becze, C.E., Clayton, P., Chen, L., El-Wardany, T.I. and Elbestawi, M.A. (2000) 'High-speed five-axis milling of hardened tool steel', International Journal of Machine Tools and Manufacture, Vol. 40, pp. 869-885. (Pubitemid 30555715)
12. Bradley, A. (1989) Superalloys: A Technical Guide, ASM International, Metals Park.
13. Brinksmeier, E. (1985a) 'X-ray stress measurement - a tool for the study and layout of machining processes', Annals of the CIRP, Vol. 33, No. 1, pp. 485-490. (Pubitemid 15577269)
14. Brinksmeier, E. (1985b) 'State of the art non destructive measurement of subsurface material properties and damages', Precision Engineering, Vol. 11, pp. 22-35.
15. Brinksmeier, E., Cammett, J.T., König, W., Leskovar, P.J. and Peters, H.K. (1982) 'Tönshoff, residual stresses - measurement and causes in machining processes', Annals of the CIRP, Vol. 31, No. 2, pp. 491-510. (Pubitemid 13564887)
16. Brinksmeier, E., Schneider, E., Theiner, W.A. and Tönshoff, H.K. (1984) 'Nondestructive testing for evaluating surface integrity', Annals of the CIRP, Vol. 33, No. 2, pp. 489-509. (Pubitemid 15577072)
17. Capello, E. (2005) 'Residual stresses in turning Part 1: influence of process parameters', Journal of Materials Processing Technology, Vol. 160, pp. 221-228. (Pubitemid 40245647)
18. Chandrasekaran, H. and M'Saoubi, R. (2006) 'Improved machinabilty in hard milling and strategies for steel development', Annals of the CIRP, Vol. 55, No. 1, pp. 93-96. (Pubitemid 44578370)
19. Chandrasekaran, H., M'Saoubi, R., Högman, B., Nordh, L.G., Coulon, B., Lebrun, J.L., Viale, D., Gitton, S., Montero, M.C., Marques, M.J., Outeiro, J.C. and Dias, A.M. (2005) Development of Machinability Enhanced Tool Steels for Improved Product Economy in Hard Milling, Technical Steel Research - Report EUR 21726, EC, Brussels.
20. Che-Haron, C.H. and Jawaid, A. (2005) 'The effect of machining on surface integrity of titanium alloy Ti-6% Al-4% V', Journal of Materials Processing Technology, Vol. 166, No. 2, 1 August, pp. 188-192. (Pubitemid 41050642)
21. Chevrier, P., Tidu, A., Bolle, B., Cezard, P. and Tinnes, J.P. (2003) 'Investigation of surface integrity in high speed milling of a low alloyed steel', International Journal of Machine Tools and Manufacture, Vol. 43, pp. 1135-1142.
22. Chuzhoy, L., DeVor, R.E., Kapoor, S.G. and Bammann, D.J. (2002) 'Microstructure-level modeling of ductile iron machining', Trans. ASME Journal of Manufacturing Science and Engineering, Vol. 124, pp. 162-169. (Pubitemid 35202603)
23. Colwell, L.V., Sinnot, M.J. and Tobin, J.C. (1955) 'The determination of residual stresses in hardened, ground steel', Trans. ASME, Vol. 77, pp. 1099-1105.
24. Dahlman, P., Gunnberg, F. and Jacobson, M. (2004) 'The influence of rake angle, cutting feed and cutting depth on residual stresses in hard turning', Journal of Materials Processing Technology, Vol. 147, No. 2, pp. 181-184.
25. DeVries, M.F., Field, M. and Kahles, J.F. (1976) 'Relationship of surface roughness and surface integrity to functional properties', Annals of the CIRP, Vol. 25, No. 2, pp. 569-573.
26. Dudzinski, D., Devillez, A., Moufki, A., Larrouque, D., Zerrouki, V. and Vigneau, J. (2004) 'A review of developments towards dry and high speed machining of inconel 718 alloy', International Journal of Machine Tools and Manufacture, Vol. 44, pp. 439-456.
27. Ee, K.C., Dillon Jr., O.W. and Jawahir, I.S. (2005) 'Finite element modeling of residual stresses in machining induced by cutting tool with a finite edge radius', Int. J. Mechanical Sciences, Vol. 47, pp. 1611-1628. (Pubitemid 41165609)
28. Ekinovic, S., Dolinsek, S. and Jawahir, I.S. (2004) 'Some observations of the chip formation process and the white layer formation in high speed milling of hardened steel', Machining Science and Technology, Vol. 8, No. 2, December, pp. 327-340.
29. El-Axir, M.H. (2002) 'A method of modeling residual stress distribution in turning for different materials', International Journal of Machine Tools and Manufacture, Vol. 42, No. 9, July, pp. 1055-1063. (Pubitemid 34771996)
30. Ezugwu, E.O. (2005) 'Key improvements in the machining of difficult-to-cut aerospace superalloys', International Journal of Machine Tools and Manufacture, Vol. 45, pp. 1353-1367. (Pubitemid 40821884)
31. Ezugwu, E.O., Wang, Z.M. and Okeke, C.I. (1999) 'Tool life and Surface integrity when machining inconel 718 with PVD- and CVD-coated tools', Tribology Transactions, Vol. 42, No. 2, pp. 353-360. (Pubitemid 29384924)
32. Field, M. and Kahles, J.F. (1964) The Surface Integrity of Machined and Ground High Strength Steels, DMIC Report, Vol. 210, pp. 54-77.
33. Field, M. and Kahles, J.F. (1971) 'Review of surface integrity of machined components', Annals of the CIRP, Vol. 20, No. 2, pp. 153-162.
34. Field, M., Kahles, J.F. and Cammett, J.T. (1972) 'Review of measuring methods for surface integrity', Annals of the CIRP, Vol. 21, pp. 219-238.
35. Fujii, T. and Matsuda, Y. (2003) 'Effects of Si content and hardness on machinabilty of hot working die steels', Denki Saiko, Vol. 74, No. 2, pp. 83-92.
36. Ghanem, F., Braham, C., Fitzpatrik, M.E. and Sidhom. H. (2002) 'Effect of near surface residual stress and microstructure modification from machining on the fatigue endurance of a tool steel', JMPEG, Vol. 11, pp. 631-639.
37. Gorsler, F.W. (1985) 'High speed machining of aircraft engine alloys', Proc. High Productivity Machining: Materials and Processes, New Orleans, Louisiana, USA, pp. 57-67.
38. Griffiths, B.J. (1987) 'Mechanism of white layer generation with reference. to machining processes and deformation processes', ASME J Tribology, Vol. 42, pp. 145-152.
39. Griffith, B. (2001) Manufacturing Surface Technology - Surface Integrity and Functional Performance, Penton Press, London.
40. Guo, Y.B. and Liu, C.R. (2002) 'FEM analysis of mechanical state on sequentially machined surfaces', Machining Science and Technology, Vol. 6, No. 1, pp. 21-41. (Pubitemid 34691201)
41. Henriksen, E.K. (1951) 'Residual stresses in machined surfaces', Trans. ASME, Vol. 73, pp. 69-74.
42. Hua, J., Shivpuri, R., Chenga, X., Bedekara, V., Matsumoto,Y., Hashimoto, F. and Watkin, T.R. (2005) 'Effect of feed rate, workpiece hardness and cutting edge on subsurface residual stress in the hard turning of bearing steel using chamfer + hone cutting edge geometry', Materials Science and Engineering A, Vol. 394, Nos. 1-2, pp. 238-248. (Pubitemid 40595014)
43. Hua, J., Umbrello, D. and Shivpuri, R. (2006) 'Investigation of cutting conditions and cutting edge preparations for enhanced compressive subsurface residual stress in the hard turning of bearing steel', Journal of Materials Processing Technology, Vol. 171, No. 2, 20 January, pp. 180-187. (Pubitemid 43052667)
44. Jaafar, I.H., Venkatachalam, A., Joshi, K., Ungureanu, A.C., de Silva, N., Dillon Jr., O.W., Rouch, K.E. and Jawahir, I.S. (2007) 'Product design for sustainability: a new assessment methodology and case studies', in Kutz, M. (Ed.): Handbook of Environmentally Conscious Mechanical Design, John Wiley & Sons, Chapter 2, pp. 25-65.
45. Jacobson, M., Dahlman, P. and Gunnberg, F. (2002a) 'Cutting speed influence on surface integrity of hard turned bainite steel', Journal of Materials Processing Technology, Vol. 128, Nos. 1-3, pp. 318-323.
46. Jacobson, M., Dahlman, P. and Gunnberg, F. (2002b) 'Cutting speed influence on surface integrity of hard turned bainite steel', J. Materials Processing Technology, Vol. 128, pp. 318-323.
47. Jacobus, K., DeVor, R.E., Kapoor, S.G. and Peascoe, R.A. (2001) 'Predictive model for the full biaxial surface and subsurface residual stress profiles from turning', ASME J. Manufacturing Science and Engineering, Vol. 123, pp. 537-546. (Pubitemid 33715851)
48. Jawahir, I.S., Dillon Jr., O.W. and Eberhart, C. (2007) 'A hybrid predictive model for cyclic curled chip formation with serrations in machining using topological properties', Proc. NSF Grantees Conf., Knoxville, TN, USA, January,CD-ROM.
49. Jawahir, I.S., Rouch, K.E., Dillon Jr., O.W., Joshi, K.J., Venkatachalam, A. and Jaafar, I.H. (2006) 'Total life-cycle considerations in product design for manufacture: a framework for comprehensive evaluation, (Keynote Paper), Proc. TMT 2006, Lloret de Mar, Barcelona, Spain, September, pp. 1-10.
50. Jeelani, S. and Bailey, J.A. (1986) 'Residual stress distribution in machining annealed 18 percent nickel maraging steel', ASME Journal of Engineering Materials and Technology, Vol. 108, pp. 93-98. (Pubitemid 16551218)
51. Jeelani, S., Biswas, S. and Natarajan, R. (1986) 'Effect of cutting speed and tool rake angle on residual stress distribution in machining 2024-T351 Aluminum alloy: a study of cumulative fatigue damage in AISI 4130 steel', J. Material Science, Vol. 21, pp. 2705-2710. (Pubitemid 16606516)
52. Joshi, K., Venkatachalam, A. and Jawahir, I.S. (2006) 'A New methodology for transforming 3R concept into 6R concept for improved product sustainability', Proc. IV Global Conference on Sustainable Product Development and Life Cycle Engineering, São Carlos, Brazil, 3-6 October, CD-ROM.
53. Klocke, F., Brinksmeier, E. and Weinert, K. (2005) 'Capability profile of hard cutting and grinding processes', Annals of the CIRP, Vol. 54, No. 2, pp. 557-580. (Pubitemid 43199078)
54. Komanduri, R. (1982) 'Some classification on the mechanics of chip formation when machining titanium alloys', Wear, Vol. 76, pp. 15-34. (Pubitemid 12524371)
55. Komanduri, R., Schroeder, T.A., Hazra, J. and von Turkovich, B.F. (1981) 'New observations on the mechanism of chip formation when machining titanium alloys', Wear, Vol. 69, pp. 179-188.
56. König, W., Berktold, A. and Koch, K.F. (1993) 'Turning versus grinding- a comparison of surface integrity aspects and attainable accuracies', Annals of the CIRP, Vol. 42, No. 1, pp. 39-43. (Pubitemid 23679093)
57. König, W., Klinger, M. and Link, R. (1990) 'Machining hard materials with geometrically defined cutting edges-field of application and limitations', Annals of the CIRP, Vol. 39, No. 1, pp. 61-64.
58. König, W., Komanduri, R., Tonshoff, H.K. and Ackershott, G. (1984) 'Machining of hard materials', Annals of the CIRP, Vol. 33, No. 2, pp. 417-427.
59. Liang, S.Y. and Su, J-C. (2007) 'Residual stress modeling in orthogonal machining', Annals of the CIRP, Vol. 56, No. 1, pp. 65-68. (Pubitemid 46898249)
60. Liu, C.R. and Barash, M.M. (1976a) 'The mechanical state of the sublayer of a surface generated by chip removal process - part 1: cutting with a sharp tool', Trans. ASME - Series B, Vol. 98, No. 4, pp. 1192-1201.
61. Liu, C.R. and Barash, M.M. (1976b) 'The mechanical state of the sublayer of a surface generated by chip removal process - part 2: cutting with a tool with flank wear', Trans. ASME - Series B, Vol. 98, No. 4, pp. 1202-1208.
62. Liu, C.R. and Barash, M.M. (1982) 'Variables governing patterns of mechanical residual stress in a machined surface', Trans. ASME - Series B, Vol. 104, No. 3, pp. 257-264.
63. Loria, E.A. (1988) 'The status and prospects of alloy 718', J. Metals, Vol. 40, No. 7, pp. 36-41.
64. Lucca, D.A., Brinksmeier, E. and Goch, G. (1998) 'Progress in assessing surface and subsurface integrity', Annals of the CIRP, Vol. 47, No. 2, pp. 669-693. (Pubitemid 128580338)
65. M'Saoubi, R. and Chandrasekaran, H. (2004) 'Role of phase and grain size on chip formation and material work hardening during machining of single and dual phase steels', Ironmaking and Steelmaking, Vol. 31, No. 3, pp. 258-264.
66. M'Saoubi, R., Outeiro, J.C., Changeux, B., Lebrun, J.L. and Dias, A.M. (1999) 'Residual stress analysis in orthogonal machining of standard and resulfurized AISI 316L steels', Journal of Materials Processing Technology, Vol. 96, Nos. 1-3, pp. 225-233. (Pubitemid 30542707)
67. Mantle, A.L. and Aspinwall, D.K. (1997) 'Surface integrity and fatigue life of turned gamma titanium aluminide', Journal of Materials Processing Technology, Vol. 72, pp. 413-420. (Pubitemid 127432353)
68. Mantle, A.L. and Aspinwall, D.K. (2001) 'Surface integrity of a high speed milled gamma titanium aluminide', Journal of Materials Processing Technology, Vol. 118, pp. 143-150. (Pubitemid 33147977)
69. Marques, M.J., Outeiro, J.C., Dias, A.M., M'Saoubi R. and Chandrasekaran, H. (2006) 'Surface integrity of H13 ERS mould steel milled by carbide and CBN tools', Materials Science Forum - Trans Tech Publications, pp. 514-516, 564-568.
70. Mativenga, P.T. and Hon, K.K.B. (2003) 'A study of cutting forces and surface finish in high-speed machining of H13 tool steel using carbide tools with TiAlN coatings', Proc. I. Mech. Eng. Part B: J. Engineering Manufacture, Vol. 217, No. 2, pp. 143-151.
71. Matsumoto, Y., Barash, M.M. and Liu, C.R. (1986) 'Effects of hardness on surface integrity of AISI 4340 steel', Trans. ASME - Series B, Vol. 108, pp. 169-175. (Pubitemid 16640241)
72. Matsumoto, Y., Hashimoto, F. and Lahoti, G. (1999) 'Surface integrity generated by precision hard turning', Annals of the CIRP, Vol. 48, No. 1, pp. 59-62.
73. Miller, S. (1996) 'Advanced materials means advanced engines', Interdisciplinary Science Review, Vol. 21, No. 2, pp. 117-129.
74. Nasr, M.N.A., Ng, E-G. and Elbestawi, M.A. (2007a) 'Modeling the effects of tool-edge radius on residual stresses when orthogonal cutting AISI 316L', Int. J. Machine Tools and Manufacture, Vol. 47, pp. 401-411. (Pubitemid 44738470)
75. Nasr, M.N.A., Ng, E-G. and Elbestawi, M.A. (2007b) 'Effects of workpiece thermal properties on machining-induced residual stresses - thermal softening and conductivity', Proc. I. Mech E.- Part B: J. Engineering Manufacture, Vol. 221, pp. 1387-1400.
76. Novovic, D., Dewes, R.C., Aspinwall, D.K., Voice, W. and Bowen, P. (2004) 'The effect of machined topography and integrity on fatigue life', International Journal of Machine Tools and Manufacture, Vol. 44, Nos. 2-3, pp. 125-134.
77. Outeiro, J.C., Dias, A.M. and Lebrun, J.L. (2004) 'Experimental assessment of temperature distribution in three-dimensional cutting process', Machining Science and Technology, Vol. 8, No. 3, pp. 357-376.
78. Outeiro, J.C., Umbrello, D. and M'Saoubi, R. (2006a) 'Experimental and numerical modelling of the residual stresses induced in orthogonal cutting of AISI 316L steel', International Journal of Machine Tools and Manufacture, Vol. 46, No. 14, pp. 1786-1794. (Pubitemid 44175809)
79. Outeiro, J.C., Dias, A.M. and Jawahir, I.S. (2006b) 'On the effects of residual stresses induced by coated and uncoated cutting tools with finite edge radii in turning operations', Annals of the CIRP, Vol. 55, No. 1, pp. 111-116. (Pubitemid 44578374)
80. Outeiro, J.C., Pina, J.P., Rodrigues, J.M. and Dias, A.M. (2007) 'Experimental and numerical analysis of residual stress induced by machining inconel 690 alloy', IV International Materials Symposium - A Materials Science Forum (Materials 2007), Faculty of Engineering of University of Porto, Porto, Portugal, 1-4 April, pp. 118-121.
81. Outeiro, J.C., Kandibanda, R., Pina, J.C., Dillon Jr., O.W. and Jawahir, I.S. (2008) 'Size effect in machining and its influence on product sustainability', Proceeding of the 15th Life Cycle Engineering Conference (LCE 2008), Sydney, 17-19 March.
82. Persson, U. and Chandrasekaran, H. (2002) 'Machinability of martensitic steels in milling and the role of hardness', in Bergström, J., Fredriksson, G., Johansson, M., Kotik, O. and Thuvander, F. (Eds.): Proc. 6th Int. Tooling Conf., Karlstad University, Sweden, pp. 1027-1036.
83. Poulachon, G., Albert, A., Schluraff, M. and Jawahir, I.S. (2005) 'An experimental investigation of work material microstructure effects on white layer formation in PCBN hard turning', Int. J. Machine Tools and Manufacture, Vol. 45, pp. 211-218.
84. Poulachon, G., Badyopadhyay, B., Jawahir, I.S., Pheulpin, S. and Seguin, E. (2003) 'The influence of the microstructure of hardened tool steels on the wear of PCBN cutting tools', Int. J. Machine Tools and Manufacture, Vol. 43, pp. 139-144. (Pubitemid 35385293)
85. Poulachon, G., Moisan, A. and Jawahir, I.S. (2001) 'On modelling the influence of thermo-mechanical behavior in chip formation during hard turning of 100Cr6 bearing steel', Annals of the CIRP, Vol. 50, No. 1, pp. 31-36. (Pubitemid 32610771)
86. Poulachon, G., Moisan, A. and Jawahir, I.S. (2007) 'Evaluation of chip morphology in hard turning using constitutive models and material property data', ASME J. Manufacturing Science and Engineering, Vol. 129, pp. 41-47. (Pubitemid 46723443)
87. Prevey, P., Hombach, D. and Mason, P. (1998) 'Thermal residual stress relaxation and distortion in surface enhanced gas turbine engine components', in Milam et al. D.L. (Eds.): Proc. 17th Heat Treating Society Conference and Exposition, and the 1st Int. Induction Heat Treating Symposium, ASM, Materials Park, OH, pp. 3-12.
88. Prevey, P.S. (1977) 'A method of determining the elastic properties of alloys in selected crystallographic directions for X-ray diffraction residual stress measurement', Advances in X-Ray Analysis, Vol. 20, pp. 345-354.
89. Prevey, P.S. (1986) 'X-ray diffraction residual stress techniques', Metals Handbook, American Society for Metals, OH, pp. 380-392.
90. Prevey, P.S. (1998) Burnishing Method and Apparatus for Providing a Layer of Compressive Residual Stress in the Surface of a Workpiece, US Patent 5,826,453, October, p.27.
91. Prevéy, P.S. and Cammett, J.T. (2004) 'The influence of surface enhancement by low plasticity burnishing on the corrosion fatigue performance of AA7075-T6', Int. Journal of Fatigue, Vol. 26, No. 9, pp. 975-982.
92. Prevey, P.S., Mason, P.W., Hornbach, D.J. and Molkenthin, J.P. (1996) 'Effect of prior machining deformation on the development of tensile residual stresses in weld-fabricated nuclear components', Journal of Materials Engineering and Performance, Vol. 5, No. 1, pp. 51-56. (Pubitemid 126539540)
93. Rahman, M., Kumar, A. and Salam, M.U. (2002) 'Experimental evaluation on the effect of minimal quantities of lubricant in milling', International Journal of Machine Tools and Manufacture, Vol. 42, pp. 539-547. (Pubitemid 34116083)
94. Rahman, M., Wong, Y.S. and Zareena, A.R. (2003) 'Machinability of titanium alloys', JSME Series C, Vol. 46, No. 1, pp. 107-115. (Pubitemid 37065360)
95. Ramesh, A., Melkote, S.N., Allard, L.F., Riester, L. and Watkins, T.R. (2005) 'Analysis of white layers formed in hard turning of AISI 52100 steel', Materials Science and Engineering A, Vol. 390, Nos. 1-2, pp. 88-97. (Pubitemid 40014587)
96. Rao, B. and Shin, Y.C. (2001) 'Analysis on high-speed face-milling of 7075-T6 aluminum using carbide and diamond cutters', International Journal of Machine Tools and Manufacture, Vol. 41, pp. 1763-1781. (Pubitemid 32536005)
97. Rentsch, R. and Inasaki, I. (1995) 'Investigation of surface integrity by molecular dynamics simulation', Annals of the CIRP, Vol. 44, No. 1, pp. 295-298.
98. Sadat, A.B. (1987) 'Surface region damage of machined inconel 718 nickel base superalloy using natural and controlled contact length tools', Wear, Vol. 119, pp. 225-235.
99. Sadat, A.B. and Bailey, J.A. (1986) 'Some observations on surface damage during machining of a bearing bronze', Wear, Vol. 108, No. 3, pp. 255-268.
100. Sadat, A.B. and Reddy, M.Y. (1992) 'Surface integrity of inconel-718 nickel-base superalloy using controlled and natural contact length tools part I: lubricated', Experimental Mechanics, Vol. 32, No. 3, pp. 282-288. (Pubitemid 23587965)
101. Sadat, A.B. and Reddy, M.Y. (1993) 'Surface integrity of inconel-718 nickel-base superalloy using controlled and natural contact length tools part II: unlubricated', Experimental Mechanics, Vol. 33, No. 4, pp. 343-348.
102. Salio, M., Berruti, T. and de Poli, G. (2006) 'Prediction of residual stress distribution after turning in turbine disks', Int. J. Mechanical Sciences, Vol. 48, pp. 976-984. (Pubitemid 43866065)
103. Sasahara, H. (2005) 'The effect on fatigue life of residual stress and surface hardness resulting from different cutting conditions of 0.45%C steel', Int. J. Machine Tools and Manufacture, Vol. 45, pp. 131-136.
104. Sasahara, H., Obikawa, T. and Shirakashi, T. (1994) 'The prediction of effects of cutting condition on mechanical characteristics in machined layer', in Usui, E. (Ed.): Advancement of Intelligent Production, Elsevier, pp. 473-478.
105. Sasahara, H., Obikawa, T. and Shirakashi, T. (1996) 'FEM analysis of cutting sequence effect on mechanical characteristics in machined layer', J. Materials Processing Technology, Vol. 62, pp. 448-453. (Pubitemid 126366051)
106. Sasahara, H., Obikawa, T. and Shirakashi, T. (2004) 'Prediction model of surface residual stress within a machined surface by combining two orthogonal plane models', Int. J. Machine Tools and Manufacture, Vol. 44, pp. 815-822.
107. Schlauer, C., Peng, R.L. and Odén, M. (2002) 'Residual stresses in a nickel-based superalloy introduced by turning', Materials Science Forum, Vols. 404-407, pp. 173-178. (Pubitemid 35362926)
108. Sharman, A.R., Hughes, J.I. and Ridgway, K. (2006) 'An analysis of the residual stresses generated in Inconel 718 when turning', Journal of Materials Processing Technology, Vol. 173, pp. 359-367. (Pubitemid 43344294)
109. Sharman, A.R.C., Aspinwall, D.K., Dewes, R.C., Clifton, D. and Bowen, P. (2001) 'The effects of machined workpiece surface integrity on the fatigue life of gamma titanium aluminide', International Journal of Machine Tools and Manufacture, Vol. 41, pp. 1681-1685.
110. Shaw, M.C. and Vyas, A. (1993) 'Chip formation in the machining of hardened steel', Annals of the CIRP, Vol. 42, No. 1, pp. 29-33. (Pubitemid 23679095)
111. Sherry, A.H. (2007) 'Advances and challenges in structural integrity', Applied Mechanics and Materials, Vols. 7-8, pp. 13-22.
112. Simoneau, A., Ng, E. and Elbestawi, M.A. (2006) 'Surface defects during microcutting', International Journal of Machine Tools and Manufacture, Vol. 46, pp. 1378-1387. (Pubitemid 44119145)
113. Simoneau, A., Ng, E. and Elbestawi, M.A. (2007) 'Grain size and orientation effects when microcutting AISI 1045 steel', Annals of the CIRP, Vol. 56, No. 1, pp. 57-60. (Pubitemid 46898247)
114. Sridhar, B.R., Devananda, G., Ramachandra, K. and Bhat, R. (2003) 'Effect of machining parameters and heat treatment on the residual stress distribution in titanium alloy IMI-834', Journal of Materials Processing Technology, Vol. 139, pp. 628-634.
115. Subhas, B.K., Ramaraja, B., Ramachandra, K. and Balakrishna, H.K. (2000a) 'Simultaneous optimization of machining parameters for dimensional instability control in aero gas turbine components made of inconel 718 alloy', Journal of Manufacturing Science and Engineering - Transactions ASME A, Vol. 22, pp. 586-590.
116. Subhas, B.K., Ramaraja, B., Ramachandra, K. and Balakrishna, H.K. (2000b) 'Dimensional instability studies in machining of inconel 718 nickel based superalloy as applied to aerogas turbine components', Journal of Engineering for Gas Turbines and Power - Transactions ASME, Vol. 122, pp. 55-61. (Pubitemid 34096337)
117. Taricco, F. (1995) 'Effect of machining and shot peening on the residual stresses of superalloy turbine discs', Proceedings of the International Gas Turbine and Aeroengine Congress and Exposition, Houston, TX, June, pp. 100-105.
118. Thiele, J.D., Melkote, S.N., Peascoe, R.A. and Watkins, T.R. (2000) 'Effect of cutting-edge geometry and workpiece hardness on surface residual stresses in finish hard turning of AISI 52100 Steel', ASME Journal of Manufacturing Science and Engineering, Vol. 122, pp. 642-648.
119. Tönshoff, H.K. and Brinksmeier, E. (1980) 'Determination of the mechanical and thermal influences on machined surfaces by microhardness and residual stress analysis', Annals of the CIRP, Vol. 29, No. 2, pp. 519-530. (Pubitemid 11486911)
120. Tönshoff, H.K., Arendt, C. and Ben Amor, R. (2000) 'Cutting of hardened steel', Annals of the CIRP, Vol. 49, No. 2, pp. 547-566. (Pubitemid 32076463)
121. Ulutan, D., Alaca, B.E. and Lazoglu, L. (2007) 'Analytical modeling of residual stresses in machining', Journal of Materials Processing Technology, Vol. 183, pp. 77-87. (Pubitemid 46195171)
122. Umbrello, D., M'Saoubi, R. and Outeiro, J.C. (2007) 'The influence of Johnson-Cook material constants on finite element simulation of machining of AISI 316L steel', International Journal of Machine Tools and Manufacture, Vol. 47, Nos. 3-4, pp. 462-470. (Pubitemid 44908903)
123. Umino, M.S., Ikenega, T., Okada, T., Murakami, Y. and Tubakino, S. (2004) 'Role of alloying elements on machinabilty of plastic-mouldnig steels', Z. Metall kd., Vol. 98, No. 2, pp. 109-114.
124. Umino, M.S., Okada, T. and Murakami, Y. (2003) 'Effect of Si content and lubricant on the machinability of hot working tool steel', Tetsu-to-Hagane, Vol. 89, No. 5, pp. 105-112.
125. Ungureanu, C.A., Das, S. and Jawahir, I.S. (2007) 'Development of a sustainability scoring method for manufactured automotive products: a case study of autobody panels', Proc. ASME-IMECE, Seattle, WA, November, CD-ROM.
126. Vosough, M., Liu, P. and Svenningsson, I. (2005) 'Depth profile of titanium alloy (Ti-6Al-4V) and residual stress measured by using X-ray diffraction after metal cutting assisted by high-pressured jet cooling', Materials Science Forum - Trans Tech Publications, pp. 545-552.
127. Vyas, A. and Shaw, M.C. (2000) 'The significance of the white layer in a hard turned steel chip', Machining Science and Technology, Vol. 4, No. 1, pp. 169-175. (Pubitemid 30589586)
128. Yang, X. and Liu, C.R. (2002) 'A new stress-based model of friction behavior in machining and its significant impact on residual stresses computed by finite element method', Int. J. Mechanical Sciences, Vol. 44, pp. 703-723. (Pubitemid 34440773)