Correlation between surface integrity of ground medium carbon steel with Barkhausen Noise parameters and magnetic hysteresis loop characteristics

Materials and Design

Volumn 30, Issue 5, 2009, Pages 1595-1603

  Vashista, M ^a   Paul, S ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY   (India)

Author keywords

Barkhausen Noise; Magnetic properties (E); Residual stress; X ray diffraction (G)

Indexed keywords

BARKHAUSEN EMISSIONS; BARKHAUSEN NOISE; EXPERIMENTAL INVESTIGATIONS; MAGNETIC BEHAVIOURS; MAGNETIC HYSTERESIS LOOPS; MAGNETIC PARAMETERS; MAGNETIC PROPERTIES (E); MEDIUM-CARBON STEELS; MICRO-HARDNESS MEASUREMENTS; RESIDUAL STRESS; SURFACE GRINDING; SURFACE INTEGRITIES; X-RAY DIFFRACTION (G); YIELD POINTS;

CARBON STEEL; DEFORMATION; DIFFRACTION; ELASTICITY; HYSTERESIS; HYSTERESIS LOOPS; MAGNETIC PROPERTIES; MAGNETISM; PLASTIC DEFORMATION; RESIDUAL STRESSES; SATURATION MAGNETIZATION; STEEL; STEEL RESEARCH; STRENGTH OF MATERIALS; X RAY ANALYSIS; X RAY DIFFRACTION; X RAY DIFFRACTION ANALYSIS;

MAGNETIC MATERIALS;

EID: 60249097514     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2008.07.030     Document Type: Article

References (44)

1. Brienkmeier E., Schneider E., Theiner W.A., and Tonshoff H.K. Nondestructive testing for evaluating surface integrity. Ann CIRP 32 (1984) 489-509
2. Tonshoff H.K., Friemuth T., and Becker J.C. Process monitoring in grinding. Ann CIRP 51 (2002) 551-571
3. Moorthy V, Blaow M, Shaw BA, Day S, Brimble K. Effect of applied and residual stresses on the magnetic Barkhausen emission profile in case-carburized En36 steel. In: Proceedings of the fourth international conference on Barkhausen Noise and micromagnetic testing; 2003. p. 85-94.
4. Singh HN, Sahoo KC. Crack growth characterization using Barkhausen Noise measurement. In: Proceedings of the fifth international conference on Barkhausen Noise and micromagnetic testing; 2005. p. 287-91.
5. Thompson S.M., and Tanner B.K. The magnetic properties of specially prepared pearlitic steels of varying carbon content as a function of plastic deformation. J Magn Magn Mater 132 (1994) 71-88
6. Langman R. Some comparison between the measurement of stress in mild steel by means of Barkhausen noise and rotation of magnetization. NDT Int 20 (1987) 93-99
7. Moorthy V., Shaw B.A., Mounford P., and Hopkins P. Magnetic Barkhausen emission technique for evaluation of residual stress alteration by grinding in case-carburised En 36 steel. Acta Mater 53 (2005) 4997-5006
8. Makar J.M., and Tanner B.K. The effect of plastic deformation and residual stress on the permeability and magnetostriction of steels. J Magn Magn Mater 222 (2000) 291-304
9. Stevens K.J. Stress dependence of ferromagnetic hysteresis loops for two grades of steel. NDT&E Int 33 (2000) 111-121
10. Moorthy V., Vaidyanathan S., Jayakumar T., and Raj B. Microstructural characterization of quenched and tempered 0.2% carbon steel using magnetic Barkhausen noise analysis. J Magn Magn Mater 171 (1997) 179-189
11. Hug A, Kleber X, Merlin J, Petitgand H. Use of magnetic Barkhausen noise measurements for multi-phase steels characterization. In: Proceedings of the 5th international conference on Barkhausen Noise and micromagnetic testing; 2005. p. 37-45.
12. Gupta H., Zhang M., and Parakka A.P. Barkhausen effect in ground steel. Acta Metall 45 (1997) 1917-1921
13. Augustyniak B, Chmielewski M, Piotrowski L, Kowalewski ZL, Mackiewicz S, Szelazek J. Complementary study with magnetic and acoustic techniques of A336 steel damage state due to creep. In: Proceedings of the fifth international conference on Barkhausen Noise and micromagnetic testing; 2005. p. 293-304.
14. Donzella G, Flammini A, Sardini E, Sisinni E, Solazzi L. Multiparametric Barkhausen noise measurement for steels and microstructure evaluation. In: Proceedings of the fourth international conference on Barkhausen Noise and micromagnetic testing; 2003. p. 19-30.
15. Balart M.J., Bouzina A., Edwards L., and Fitzpatrick M.E. The onset of tensile residual stress in grinding of hardened steels. Mater Sci Eng 367 (2004) 132-142
16. Wu H., Roberts S.G., and Derby B. Residual stress and subsurface damage in machined alumina and alumina/silicon carbide nanocomposite ceramics. Acta Mater 49 (2001) 507-517
17. Liao Y.S., Luo S.Y., and Yang T.H. A thermal model of the wet grinding process. J Mater Process Technol 101 (2000) 137-145
18. Zarudi I., and Zhang L.C. A revisit to some wheel-workpiece interaction problems in surface grinding. Int J Machine Tools Manuf 42 (2002) 905-913
19. Paul S., and Chattopadhyay A.B. A study of effect of cyro-cooling in grinding. Int J Mach Tools Manuf 35 (1995) 109-117
20. Thompson S.M., and Tanner B.K. The magnetic properties of pearlitic steels as a function of carbon content. J Magn Magn Mater 123 (1993) 283-298
21. Moorthy V., Vaidyanathan S., Jayakumar T., Raj B., and Kashyap B.P. Effect of tensile deformation on micromagnetic parameters in 0.2% carbon steel and 2.25Cr-1Mo steel. Acta Metall 47 L (1999) 1869-1878
22. Blaow M., Evans J.T., and Shaw B.A. Surface decarburization of steel detected by magnetic Barkhausen emission. J Mater Sci 40 (2005) 5517-5520
23. Brienksmeier E., and Tonshoff H.K. X-ray stress measurement - a tool for the study and layout of machining processes. Ann CIRP 34 (1985) 485-490
24. Makar J.M., and Tanner B.K. The effect of stresses approaching and exceeding the yield point on the magnetic properties of high strength pearlitic steels. NDT & E 31 (1998) 117-127
25. Flammini A, Marioli D, Sardini E, Taroni A. New measurement and processing techniques of the Barkhausen noise. In: Proceedings fourth international conference on Barkhausen Noise and micromagnetic testing; 2003. p. 255-65.
26. Yoshino M., Tanabe H., Sakamoto T., Suzuki N., and Yaji Y. Nondestructive measurement of grain size in steel plates by using magnetic coercive force. Mater Sci Forum 210-213 (1996) 45-54
27. Anglada-Rivera J., Padovese L.R., and Capo-Sanchez J. Magnetic Barkhausen Noise and H. loop in commercial carbon steel: influence of applied tensile stress and grain size. J Magn Magn Mater 231 (2001) 299-306
28. Grum J, Zerovnik P. Assessment of variously heat treated C45 E based on captured magnetization curves. In: Proceedings of the third international conference on Barkhausen Noise and micromagnetic testing; 2001.
29. Jacob P, Marrone S, Suominen L, Honkamaki V. Non-destructive evaluation of residual stress depth profiles by Barkhausen noise analysis and their validation by XRD method combined with electrochemical (destructive) surface removal. In: Proceedings of the fourth international conference on Barkhausen Noise and micromagnetic testing; 2003. p. 361-8.
30. Silva Jr SF, Mansur TR. Determining residual stresses in ferromagnetic materials by Barkhausen noise measurement. In: 15th WCNDT Roma; 2000.
31. Wojtas A.S., Suominen L., Shaw B.A., and Evans J.T. Detection of thermal damage in steel components after grinding using magnetic Barkhausen noise method. NDT net 3 9 (1998)
32. Sullivan D.O., Cotterell M., Cassidy S., Tanner D.A., and Meszaros I. Magneto-acoustic emission for the characterization of ferrite stainless steel microstructural state. J Magn Magn Mater 271 (2004) 381-389
33. Sullivan D.O., Cotterell M., Tanner D.A., and Meszaros I. Characterization of ferrite stainless steel by Barkhausen techniques. NDT & E Int 37 (2004) 489-496
34. Pal'a J., Stupakov O., Bydzovsky J., Tomas I., and Novak V. Magnetic behaviour of low carbon steel in parallel and perpendicular directions to tensile deformation. J Magn Magn Mater 310 (2007) 57-62
35. Moorthy V., Vaidyanathan S., Jayakumar T., Raj B., and Kashyap B.P. Effect of tensile deformation on micromagnetic parameters in 0.2% carbon steel and 2.25 Cr-1 Mo steel. Acta Mater 47 (1999) 1869-1878
36. Lindgren M., and Lepisto T. Effect of prestraining on Barkhausen noise vs. stress relation. NDT&E Int 34 (2001) 337-344
37. Poggie R.A., and Wert J.J. The influence of surface finish and strain hardening on near-surface residual stress and the friction and wear behaviour of A2, D2 and CPM-10V tool steels. Wear 149 (1991) 209-220
38. Sosa A.D., Echeverria M.D., Moncada O.J., and Simison S.N. Surface reactivity of thin wall ferritic ductile iron. The effect of nodule count and grinding variables. Mater Lett 62 (2008) 100-102
39. Xu X.P., Yu Y.Q., and Xu H.J. Effect of grinding temperature on the surface integrity of a nickel-based superalloy. J Mater Process Technol 129 (2002) 359-363
40. Nguyen T., Zarudi I., and Zhang L.C. Grinding hardening with liquid nitrogen. Int J Machine Tools Manuf 47 (2007) 97-106
41. Eda H., Ohmura E., Yamauchi S., and Inasaki I. Computer visual simulation on structural changes of steel in grinding process and experimental verification. Ann CIRP 42 (1993) 389-392
42. Sosa A.D., Echeverria M.D., Moncada O.J., and Sikora J.A. Residual stresses, distortion and surface roughness produced by grinding thin wall ductile iron plates. Int J Machine Tools Manuf 47 (2007) 229-235
43. Ohbuchi Y., and Matsuo T. Force and chip formation in single-grit orthogonal cutting with shaped cBN and diamond grains. Ann CIRP 40 (1991) 327-330
44. Matsuo T., Shibahara H., and Ohbuchi Y. Curvature in surface grinding of thin workpieces with superabrasive wheels. Ann CIRP 36 (1987) 231-234