Size effects in manufacturing of metallic components

CIRP Annals - Manufacturing Technology

Volumn 58, Issue 2, 2009, Pages 566-587

  Vollertsen, F ^a   Biermann, D ^b   Hansen, H N ^c   Jawahir, I S ^d   Kuzman, K ^e  

^a BIAS BREMER INSTITUT FÜR ANGEWANDTE STRAHLTECHNIK GMBH   (Germany)

^b TU DORTMUND UNIVERSITY   (Germany)

^c TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

^d UNIVERSITY OF KENTUCKY   (United States)

^e UNIVERSITY OF LJUBLJANA   (Slovenia)

Author keywords

Forming; Machining; Size effects

Indexed keywords

CUTTING PROCESS; FORMING PROCESS; GEOMETRICAL FEATURES; METALLIC COMPONENT; SIZE EFFECTS; SYSTEMATIC REVIEW;

MACHINING;

SIZE DETERMINATION;

EID: 70449522052     PISSN: 00078506     EISSN: 17260604     Source Type: Journal    
DOI: 10.1016/j.cirp.2009.09.002     Document Type: Article

References (231)

1. Pawelksi O. Ähnlichkeitstheorie in der Umformtechnik. In: Dahl W., Kopp R., and Pawelski O. (Eds). Umform-technik (1993), Plastomechanik und Werkstoffkunde, Springer Berlin 158-176
2. Pawelski H., and Pawelski O. Technische Plastomechanik (2000), Stahleisen Düsseldorf
3. Pawelski O. Beitrag zur Ähnlichkeitstheorie der Umformtechnik. Archiv für das Eisenhüttenwesen 35 1 (1964) 27-36
4. Kopp R., and Wiegels H. Einführung in die Umformtechnik (1998), Augustinus Buchhandlung, Aachen
5. Gunasekera J.S., Havanek J., and Littlejohn M.H. The Effect of Specimen Size on Stress-Strain Behaviour in Compression. Transactions of the ASME 104 (1982) 274-279
6. Pawelski O. Ways and Limits of the Theory of Similarity in Application to Problems of Physics and Metal Forming. Journal of Materials Processing Technology 34 (1992) 19-30
7. Vollertsen F. Size Effects in Manufacturing. In: Vollertsen F., and Hollmann F. (Eds). Strahltechnik vol. 24 (2003), BIAS-Verlag, Bremen 1-9
8. Geiger M., Kleiner M., Eckstein R., Tiesler N., and Engel U. Microforming. Annals of the CIRP 50 2 (2001) 445-462
9. Vollertsen F., Schulze Niehoff H., and Hu Z. State of the Art in Micro Forming. Journal of Machine Tools and Manufacture 46 11 (2006) 1172-1179
10. Engel U., and Eckstein R. Microforming-From Basic Research to its Realization. Journal of Materials Processing Technology 125-126 (2002) 35-44
11. Van Brussel H., Peirs J., Reynaerts D., Delchambre A., Reinhart G., Roth N., Weck M., and Zussmann E. Assembly of Microsystems. Annals of CIRP 49 2 (2000) 451-472
12. Masuzawa T. State-of-the-Art on Micromachining. Annals of CIRP 49 2 (2000) 473-488
13. Vollertsen F. Categories of Size Effects. Production Engineering 2 4 (2008) 377-383
14. Geiger M., Vollertsen F., and Kals R. Fundamentals on the Manufacturing of Sheet Metal Microparts. CIRP Annals 45 (1996) 277-282
15. Arzt E. Size Effects in Materials Due to Microstructural and Dimensional Constraints: A Comparative Review. Acta Materialia 46 16 (1998) 5611-5626
16. Schulze Niehoff H., and Vollertsen F. Versatile Micro Forming Press. In: Vollertsen F., and Yuan S. (Eds). Proceedings of the 2nd International Conference on New Forming Technology (2007), BIAS-Verlag, Bremen 167-176
17. Kopp R., and van Putten K. Flow Curve Determination of Micro Strip With Aid of the Plane Strain Compression Test. In: Vollertsen F., and Hollmann F. (Eds). Strahltechnik vol. 24 (2003), BIAS-Verlag, Bremen 73-79
18. Picart P., and Michel J.F. Effects of Size and Texture on the Constitutive Behaviour for Very Small Components in Sheet Metal Forming. Advanced Technology of Plasticity 2 (1999) 895-900
19. Kurosaki Y. Thickness Dependence of Equi-Biaxial Yield Stress and Limit Strain in Electronic Copper Sheets and Foils. Proceedings of the International Conference on Technology of Plasticity (1993) 1893-1898
20. Hoffmann H., and Hong S. Tensile Test of Very Thin Sheet Metal and Determination of Flow Stress Considering the Scaling Effect. Annals of the CIRP 55 1 (2006) 263-266
21. Chen F.K., and Tsai J.W. A Study of Size Effect in Micro-Forming With Micro-Hardness Tests. Journal of Materials Processing Technology 177 1-3 (2006) 146-149
22. Manika I., and Maniks J. Size Effects in Micro- and Nanoscale Indentation. Acta Materialia 54 8 (2006) 2049-2056
23. Stölken J.S., and Evans A.G. A Microbend Test Method for Measuring the Plasticity Length Scale. Acta Materialia 46 (1998) 5109-5115
24. Xiang Y., and Vlassak J.J. Bauschinger and Size Effects in Thin-Film Plasticity. Acta Materialia 54 20 (2006) 5449-5460
25. Brenner S.S. Tensile Strength of Whiskers. Journal of Applied Physics 27 12 (1956) 1484-1491
26. Greer J.R., Oliver W.C., and Nix W.D. Size Dependence of Mechanical Properties of Gold at the Micron Scale in the Absence of Strain Gradients. Acta Materialia 53 6 (2005) 1821-1830
27. Raulea L.V., Govaert L.E., and Baaijens F.P.T. Grain and Specimen Size Effects in Processing Metal Sheets. Advanced Technology of Plasticity 2 (1999) 939-944
28. Raulea L.V., Goijaets A.M., Govaert L.E., and Baaijens F.P.T. Size Effects in the Processing of Thin Metal Sheets. Proceedings of the SheMet'99 (1999) 521-528
29. Raulea L.V., Goijaets A.M., Govaert L.E., and Baaijens F.P.T. Size Effects in the Processing of Thin Metal Sheets. Journal of Materials Processing Technology 115 1 (2001) 22: 44-48
30. Gau J.-T., Principe C., and Wang J. An Experimental Study on Size Effects on Flow Stress and Formability of Aluminium and Brass for Microforming. Journal of Materials Processing Technology 184 1-3 (2007) 42-46
31. Di Lorenzo R., Beccari S., and Micari F. An Experimental Investigation on Micro Sheet Forming. Proceedings of the 1st International CIRP Seminar on Micro and Nano Technology. Copenhagen (2003) 73-76
32. Carrillo J.G., and Cantwell W.J. Scaling Effects in the Tensile Behaviour of Fiber-Metal Laminates. Composites Science and Technology 67 (2007) 1684-1693
33. Vollertsen F., and Vogler S. Werkstoffeigenschaften und Mikrostruktur (1989), Hanser Munich
34. Krüger L., Meyer L.W., and Halle Th. Size Effects at Flow Stress Behaviour Under Compressive Loading. In: Vollertsen F., and Hollmann F. (Eds). Strahltechnik vol. 24 (2003), BIAS-Verlag, Bremen 65-71
35. Krüger L., Meyer L.W., Halle T., and Herzig N. Size Effects on Flow Stress Behaviour of Tool Steel 40CrMnMo7 at High Loading Rates. Proceedings of the 6th Mesomechanics. Patras (Greece) (2004) 420-425
36. Meyer L.W., Herzig N., and Krüger L. Size Effects on Flow Stress and Failure of Ti-6-22-22S and Al7075 Over a Wide Range of Strain Rates. Proceedings of the 11th ICF International Conference on Fracture Turin (Italy) (on CD) (2005)
37. Herzig N., Meyer L.W., and Halle T. Time and Size Dependencies of Flow and Failure Behaviour of Metallic Materials: An Experimental Study, MESO. International Conference for Mesomechanics, vol. 8 (2006). 972-8953-07-0 25-32
38. Janssen PJM (2007) First-Order Size Effects in the Mechanics of Miniaturised Components, PhD thesis, Eindhoven University of Technology.
39. Bull S.J. On the Origins and Mechanisms of the Indentation Size Effects. Zeitschrift Fur Metallkunde 94 (2003) 787-792
40. Fleischer R.L., and Chalmers B. Size effects in the Deformation of Aluminium. Transactions of the Metallurgical Society, AIME 212 (1958) 265-274
41. Nix W.D., and Gao H. Indentation Size Effects in Crystalline Materials: A Law for Strain Gradient Plasticity. Journal of the Mechanics and Physics of Solids 46 3 (1998) 411-425
42. Ashby M.F. The Deformation of Plastically Non-Homogeneous Materials. Philosophical Magazines 21 (1970) 399-424
43. Fleck N.A., and Hutchinson J.W. Strain Gradient Plasticity. Advances in Applied Mechanics 33 (1997) 295-361
44. Fleck N.A., and Hutchinson J.W. A Reformulation of Strain Gradient Plasticity. Journal of the Mechanics and Physics of Solids 49 (2001) 2245-2271
45. Bazant Z.P., and Guo Z. Size Effect and Asymptotic Matching Approximations in Straingradient Theories of Micro-Scale Plasticity. International Journal of Solids and Structures 39 (2002) 5633-5657
46. Zhao M., Slaughter W.S., Li M., and Mao S.X. Material-Length-Scale-Controlled Nanoindentation Size Effects DUE TO Strain-Gradient Plasticity. Acta Materialia 51 (2003) 4461-4469
47. Michel J.F., and Picart P. Modelling the Constitutive Behaviour of Thin Metal Sheet Using Strain Gradient Theory. Journal of Materials Processing Technology 125 126 (2002) 164-169
48. Michel J.F., and Picart P. Modeling and FE Simulation for Thin Sheet Metal Forming Using Strain Plasticity Gradient. ICTP, International Conference on Technology of Plasticity 7 (2002) 1045-1050
49. Pernin N., Chambert J., and Picard P. Modelling of Micro-Forming by Plasticity Gradient and Surface Layer Methods. ESAFORM, International ESAFORM Conference on Material Forming 8 (2005) 109-112
50. Shu J.Y., and Fleck N.A. The Prediction of a Size Effect in Micro-Indentation. International Journal of Solids and Structures 35 13 (1998) 1363-1383
51. Yuan U., Chen J., Krompholz K., and Wittmann F.H. Investigations of Size Effects in Tensile Tests Based on a Nonlocal Micro-Mechanical Damage Model. Computational Materials Science 26 (2003) 230-243
52. Geiger M., Engel U., Vollertsen F., Kals R., and Messner A. Metal Forming of Micro Parts for Electronics. Production Engineering II 1 (1994) 15-18
53. Kals R., Pucher H.J., and Vollertsen F. Effects of Specimen Size and Geometry in Metal Forming. In: Hashmi S.J. (Ed). Proceedings of the 2nd International Conference on Advances in Materials and Processing Technologies, vol. III. Dublin (1995) 1288-1297
54. Picart P., Ghouati O., and Gelin J.C. Characterization and Modelisation of Metal Forming for Micro Components. Proceedings of the first ESAFORM Conference (1998) 33-36
55. Peng L., Liu F., Ni J., and Lai X. Size Effects in Thin Sheet Metal Forming and its Elastic-Plastic Constitutive Model. Materials & Design 28 5 (2007) 1731-1736
56. Engel U., Meßner A., and Geiger M. Advanced Concept for the FE-Simulation of Metal Forming Processes for the Production of Microparts, Advanced Technology of Plasticity. In: Altan T. (Ed). Proceedings of the 5th ICTP, vol. II. Columbus, Ohio, USA (1996) 903-907
57. Kals R., Vollertsen F., and Geiger M. Scaling Effects in Sheet Metal Forming. In: Kals H.J.J., Shirvani B., Singh U.P., and Geiger M. (Eds). Sheet Metal vol. II (1996), University of Twente Enschede 65-75
58. van Putten K., Franzke M., and Hirt G. Size Effect on Friction and Yielding in Wire Flat Rolling. In: Vollertsen F., and Yuan S. (Eds). Proceedings of the 2nd International Conference on New Forming Technology (2007), BIAS-Verlag, Bremen 583-592
59. Armstrong R.W. On Size Effect in Polycrystal Plasticity. Journal of Mechanics and Physics of Solids 9 (1961) 196-199
60. Cao J., Krishnan N., Wang Z., Lu H., Liu W.K., and Swanson A. Microforming - Experimental Investigation of the Extrusion Process for Micropins and its Numerical Simulation Using RKEM. ASME Journal of Manufacturing Science and Engineering 126 (2004) 642-652
61. Groche P., Schäfer R., and Henning M. Finite Element Calculation of Surface Evolution Considering Grain Size and Crystallographic Texture Effects. In: Azushima A. (Ed). Proceedings of the 3rd International Conference on Tribology in Manufacturing Processes ICTMP, vol. 09 (2007), Yokohama National University 219-226
62. Justinger H., and Hirt G. Scaling Effects in the Miniaturization of the Deep Drawing Process. In: Vollertsen F., and Yuan S. (Eds). Proceedings of the 2nd International Conference on New Forming Technology (2007), BIAS-Verlag, Bremen 665-674
63. Justinger H., and Hirt G. Estimation of Grain Size and Grain Orientation Influence in Microforming Processes by Taylor Factor Considerations. Journal of Material Processing Technology 209 (2009) 2111-2121
64. Mori L., Krishnan N., Cao J., and Espinosa H. Study of the Size Effects and Friction Conditions in Micro-Extrusion. Part II. Size Effect in Dynamic Friction for Brass-Steel Pairs. ASME Journal of Manufacturing Science and Engineering 129 4 (2007) 677-689
65. Messner A., Engel U., Kals R., and Vollertsen F. Size Effect in the FE-Simulation of Micro-Forming Processes. Journal of Materials Processing Technology 45 1-4 (1994) 371-376
66. Geiger M., Messner A., Engel U., Kals R., and Vollertsen F. Design of Micro-Forming Processes: Fundamentals, Material Data and Friction Behaviour. International Cold Forging Congress 9 (1995) 155-164
67. Behrens B.-A., Doege E., and Hundertmark A. Modelling of Size-Effects in Bulk Metal Forming Processes. In: Vollertsen F., and Hollmann F. (Eds). Strahltechnik vol. 24 (2003), BIAS-Verlag, Bremen 49-56
68. Tiesler N., Engel U., and Geiger M. Forming of Microparts - Effects of Miniaturization on Friction. Advanced Technology of Plasticity 2 (1999) 889-894
69. Engel U., Tiesler N., and Eckstein R. Microparts - A Challenge for Forming Technology, ICIT. International Conference on Industrial Tools 3 (2001) 31-39
70. Geiger M., Tiesler N., and Engel U. Cold Forging of Microparts. Production Engineering, Research and Development 10 1 (2003) 19-22
71. Hu Z., Schulze Niehoff H., and Vollertsen F. Tribological Size Effects in Deep Drawing. In: Vollertsen F., and Yuan S. (Eds). Proceedings of the 2nd International Conference on New Forming Technology (2007), BIAS-Verlag, Bremen 573-582
72. Hu Z., Schulze Niehoff H., and Vollertsen F. Determination of the Friction Coefficients in Deep Drawing. In: Vollertsen F., and Hollmann F. (Eds). Strahltechnik vol. 24 (2003), BIAS-Verlag, Bremen 27-34
73. Hu Z., and Vollertsen F. Scaled Friction Test Integrated in Deep Drawing. Proceedings of the 2nd International Conference on Tribology in Manufacturing Processes (2004) 561-568
74. Vollertsen F., and Hu Z. Tribological Size Effects in Sheet Metal Forming Measured by a Strip Drawing Test. Annals of the CIRP 55 1 (2006) 291-294
75. Vollertsen F., and Hu Z. Determination of Size-Dependent Friction Functions in Sheet Metal Forming with Respect to the Distribution of the Contact Pressure. Production Engineering 2 4 (2008) 345-350
76. Vollertsen F., and Hu Z. On the Drawing Limit in Micro Deep Drawing. Journal Technology of Plasticity 1-2 32 (2007) 1-11
77. Pawelski O., and Lueg W. Versuche und Berechnungen über das Ziehen und Einstoßen von Rundstä-ben. Stahl und Eisen 81 25 (1961) 1729-1739
78. Engel U., Messner A., and Tiesler N. Cold Forging of Microparts - Effect of Miniaturisation on Friction. In: Chenot J.L., et al. (Ed). Proceedings of the 1st ESAFORM Conference on Materials Forming. Sophia Antipolis, France (1998) 77-80
79. Tiesler N., and Engel U. Microforming - Effects of Miniaturization, Metal Forming. International Conference on Metal Forming, vol. 8 (2000) 355-360
80. Tiesler N. Microforming - Size Effects in Friction and Their Influence on Extrusion Processes. Wire 52 (2002) 34-38
81. Herzig N., and Meyer L.W. Material Characterisation at High Strain Rates with Special Emphasis on Miniaturization and Size Dependencies. In: Kleiner M., and Tekkaya E. (Eds). Proceedings of the International Conference on High Speed Forming (2nd ICHSF). Dortmund (2006) 13-22
82. Bech J.I., Bay N., and Eriksen M. A Study of Mechanisms of Liquid Lubrication in Metal Forming. Annals of CIRP 47 1 (1998) 221-226
83. Engel U. Tribology in Microforming. Proceedings of the 2nd International Conference on Tribology in Manufacturing Processes (2004) 549-559
84. Engel U. Tribology in Microforming. Wear 260 3 (2006) 265-273
85. Nilsson M.S., Olsson D.D., Petrushina I., Andreasen J.L., Bay N., Christensen E., and Bjerrum N.J. Development of Strategic Surface Topographies for Lubrication in Sheet Forming of Stainless Steel. Proceedings of the International Conference on Tribology in Manufacturing Processes, ICTMP2004. Nyborg, Denmark (2004) 275-284
86. Sørensen C.G., Andreasen J.L., Bech J., Bay N., Engel U., and Neudecker T. A Basic Study of the Influence of Surface Topography on Mechanisms of Liquid Lubrication in Metal Forming. Annals of the CIRP 48 1 (1999) 203-208
87. Geiger M., Messner A., and Engel U. Production of Microparts - Size Effects in Bulk Metal Forming, Similarity Theory. Production Engineering 4 1 (1997) 55-58
88. Krishnan N., Cao J., Kinsey, and Dohda K. Microforming: Study of Friction Conditions and the Impact of Low Friction/High-Strength Die Coatings on the Extrusion of Micropins. MED 16 1 (2005) 331-340
89. Krishnan N., Cao J., and Dohda K. Study of the Size Effect on Friction Conditions in Micro-Extrusion. Part 1. Micro-Extrusion Experiments and Analysis. ASME Journal of Manufacturing Science and Engineering 129 4 (2007) 669-676
90. Simons G., Weippert C., Dual J., and Villain J. Size Effects in Tensile Testing of Thin Cold Rolled and Annealed Cu Foils. Materials Science and Engineering A 416 1-2 (2006) 290-299
91. Michel J.F., and Picart P. Size Effects on the Constitutive Behaviour for Brass in Sheet Metal Forming. Journal of Materials Processing Technology 141 (2003) 439-446
92. Yamaguchi K., and Mellor P. Thickness and Grain Size Dependence of Limit Strains in Sheet Metal Stretching. International Journal of Mechanical Sciences 18 2 (1976) 85-90
93. Fülöp T., Brekelmans W.A.M., and Geers M.G.D. Size Effects From Grain Statistics in Ultra-Thin Metal Sheets. Journal of Materials Processing Technology 174 1-3 (2006) 233-238
94. Diehl A., Engel U., and Geiger M. Mechanical Properties and Bending Behaviour of Metal Foils. Proceedings of the IMechE, Part B: Jounal of Engineering Manufacture 222 (2008) 83-91
95. Meyer L.W., and Herzig N. Größeinflüsse beim Fließ-, Verfestigungs- und Versagenverhalten metalischer Werkstoffe, 2. Kolloquium Prozessskalierung. Bremen (2005) 147-156
96. Keeler S.P., and Brazier W.G. Relationship Between Laboratory Material Characterisation and Press-Shop Formability. Proceedings of the Microalloying, vol. 75 (1977), Union Carbide, New York 517-530
97. Hašek V., and Lange K. Forming-Limit Diagram and Its Applications in Deep-Drawing and Stretch-Forming Processes. Werkstattstechnik Zeitschrift Fur Industrielle Fertigung 70 (1980) 577-580 (in German)
98. Tanaka S., Nakamura T., and Hayakawa K. Miniature Incremental Forming of Millimeter-Sized Thin Shell Structures. Advanced Technology of Plasticity 1 (2002) 403-408
99. Diehl A., Geissdörfer S., and Engel U. Investigation of Size Dependent Mechanical Properties of Metal Foils in Micro Sheet Metal Forming Processes. Proceedings of the 2nd ICOMM, Clemson University: Proceedings of the 2nd International Conference on Micromanufacturing. Greenville, USA (2007) 156-161
100. Diehl A., Staud D., and Engel U. Investigation of the Mechanical Behaviour of Thin Metal Sheets Using the Hydraulic Bulge Test. Proceedings of the 4th International Conference Multi-Material Micro Manufacture (4M), Cardiff Sept, vol. 9-11 (2008) 195-198
101. Saotome Y., and Kaga H. Micro Deep Drawability of Very Thin Sheet Steels. Advanced Technology of Plasticity 3 (1990) 1341-1346
102. Yamaguchi K., Sagrado R., Takakura N., and Lizuka T. Effect of Thickness on the Restoration Behavior of Sheet Metals Subjected to Bulge Deformation, ICTP. International Conference on Technology of Plasticity 7 (2002) 997-1002
103. Lee R.S., Chen C.H., and Gau J.-T. Effect of Thickness to Grain Size Ratio on Drawability for Micro Deep Drawing of AISI 304 Stainless Steel. In: Yang D.Y., Kim Y.H., and Park C.H. (Eds). Proceedings of the 9th ICTP (2008) paper MD 1-2 (on CD)
104. Kast D (1969) Modellgesetzmäßigkeiten beim Rückwärtsfließpressen geometrisch ähnlicher Näpfe, Dissertation, Giradet Essen.
105. Arentoft M., Bruschi S., Ghiotti A., Paldau N.A., and Holstein I.V. Microforming of Light Weight Metals in Warm Conditions. In: Engel U., and Rosochowski A. (Eds). Proceedings of the 11th ESAFORM Conference MS08-1 (on CD). Lyon, France (2008)
106. Wulfsberg J.P., Hilpert S.-E., Ostendorf A., and Samm K. Fundamentals of Laser-Assisted Microforming. In: Vollertsen F., and Hollmann F. (Eds). Strahltechnik vol. 24 (2003), BIAS-Verlag, Bremen 89-98
107. Justinger H., and Hirt G. Analysis of Size-Effects in the Miniaturized Deep Drawing Process. Key Engineering Materials 344 (2007) 791-798
108. Witulski N., Hirt G., and Justiger H. Validation of FEM-Simulation for Micro Deep Drawing Process Modeling. Proceeding of the 8th International Conference on Numerical Methods in Industrial Forming Process (2004). 0-7354-0188-8
109. Eckstein R., and Engel U. Behavior of the Grain Structure in Micro Sheet Metal Working, Metal Forming. International Conference on Metal Forming 8 (2000) 453-459
110. Geiger M., Eckstein R., and Engel U. Study of Micro Sheet Metal Working Processes, Production Engineering. Research and Development 8 1 (2001) 55-58
111. Geißdörfer S., Rosochowski A., Olejnik L., Engel U., and Richert M. Micro-Extrusion of Ultrafine Grained Copper. International Journal of Material Forming (2008) (available on-line)
112. Geiger M., Geißdörfer S., and Engel U. Mesoscopic Model - Advanced Simulation of Microforming Processes. Production Engineering Research Development 1 1 (2007) 79-84
113. Geißdörfer S., Engel U., and Geiger M. Mesoscopic Model - Simulative Approach to the Scatter of Process Factors in Microforming. In: Vollertsen F., and Hollmann F. (Eds). Strahltechnik vol. 24 (2003), BIAS-Verlag, Bremen 81-88
114. Eichenhüller B., Engel U., and Geissdörfer S. Process Parameter Interaction in Microforming. International Journal of Material Forming (2008) (available on-line)
115. Arentoft M., Paldan N.A., Eriksen R.S., Gastaldi T., Wert J., and Eldrup M. Bulk Forming of Industrial Micro Components in Conventional Metals and Bulk Metallic Glasses. Proceedings of the10th ESAFORM Conference on Material Forming (2007) 665-670
116. Justinger H., Hirt G., and Witulski N. Analysis of Cup Geometry and Temperature Conditions in the Miniaturized Deep Drawing Process. Advanced Technology of Plasticity (2005) 459-460
117. Justinger H., Witulski N., and Hirt G. Experimental and Numerical Investigation of Miniaturisation in Deep Drawing. Proceedings of the 10th International Conference on Metal Forming (2004), Metal Forming 693-698
118. Hirt G., Justinger H., and Witulski N. Analysis of Size Effects in Micro Sheet Forming. In: Vollertsen F., and Hollmann F. (Eds). Strahltechnik vol. 24 (2003), BIAS-Verlag, Bremen 27-34
119. Richelsen A.B., and van der Giessen E. Size Effects in Sheet Drawing. Proceedings of the 9th International Conference on Sheet Metal. Leuven (2001) 263-270
120. Hirt G., and Rattay B. Coining of Sheet Metal to Produce Thin Plates with Micro Channel Structures, SheMet. Proceedings of the 9th International Conference on Sheet Metal, vol. 9 (2001) 119-126
121. Ike H., and Plancak M. Controlling Metal Flow of Surface Microgeometry in Coining Process. Advanced Technology of Plasticity 2 (1999) 907-912
122. Diehl A., Engel U., and Geiger M. Investigation of the Spring-Back in Metal Foil Forming. Proceeding of the 24th IDDRG Conference. Besancon, France (2005)
123. Diehl A., Engel U., and Geiger M. Spring-Back Behaviour of Thin Metal Foils in Free Bending Processes. Multi-Material Micro Manufacture (2005) 147-150
124. Cavaliere P., Gabrielli F., and Frantini L. Bending of Very Thin Sheets: The Influence of Thickness on Material Characterisation. In: Pietrzyk, et al. (Ed). Metal Forming. Rotterdam (2000) 405-410
125. Kals R. Fundamentals on the Miniaturization of Sheet Metal Working Processes (1998), Meisenbach-Verlag, Bamberg
126. Kals R.T.A., and Eckstein R. Miniaturization in Metal Sheet Working. Journal of Material Processing Technology 103 (2000) 95-101
127. Pucher H.J., Kals R., Buchner M., and Glasmacher M. Simulation of Micro Bending Process for Metal Forming of Component Leads. Proceedings of the First Plan Pacific Microelectronics Symposium. Honolulu (1996) 37-44
128. Gau J.-T., Principe C., and Yu M. Springback Behavior of Brass in Micro Sheet Forming. Journal of Materials Processing Technology 191 (2007) 7-10
129. Kocanda A., and Prejs T. The Effect of Miniaturisation on the Final Geometry of the Bent Products, Metal Forming. International Conference on Metal Forming 8 (2000) 375-378
130. Groche P., and Schäfer R. Analysis of the Geometrical Tolerances and Surface Roughness of the Spinning Process. In: Vollertsen F., and Hollmann F. (Eds). Strahltechnik vol. 24 (2003), BIAS-Verlag, Bremen 35-42
131. Paris H., Brissaud D., and Gouskov A. A More Realistic Cutting Force Model at Uncut Chip Thickness Close to Zero. Annals of the CIRP 56 1 (2007) 415-418
132. Geißdörfer S., Engel U., and Geiger M. A Novel Approach for In-Situ Observation of Local Deformation Behaviour at Micro Scale. In: Yang D.Y., Kim Y.H., and Park C.H. (Eds). Proceedings of the 9th ICTP (2008) paper MD 1-5 (on CD)
133. Geißdörfer S., and Engel U. Mesoskopisches Modell zur Abbildung von Größeneffekten mit Methoden der FE-Simulation für die Kaltmassivumformung. In: Vollertsen F. (Ed). Größeneinflüsse bei Fertigungsprozessen (2009), BIAS-Verlag, Bremen 155-180
134. Alting L., Kimura F., Hansen H.N., and Bissacco G. Micro Engineering. Annals of CIRP 52 2 (2003) 635-658
135. Saotome Y., and Iwazaki H. Superplastic Backward Microextrusion of Microparts for Micro-Electro-Mechanical Systems. Journal of Materials Processing Technologies 119 (2001) 307-311
136. Wulfsberg J.P., and Terzi M. Investigation and Application of Size Effect in the Laser Assisted Forging of Microparts With Transparent Tools. Advanced Technology of Plasticity (2005) 453-454
137. Hansen H.N., Eriksson T., Arentoft M., and Paldan N. Design Rules for Microfactory Solutions. Proceedings of the 5th International Workshop on Microfactories. Besancon, France (2006)
138. Paldan N.A., Arentoft M., and Eriksen R.S. Production Equipment and Processes for Bulk Formed Micro Components. Proceedings of the 10th ESAFORM, April. Saragoza, Spain (2007)
139. Backer W.R., Marshall E.R., and Shaw M.C. The Size Effect in Metal Cutting. Transactions of the ASME 74 (1952) 61-72
140. Taniguchi N. The State-of-the-Art of Nanotechnology for Processing Ultra-Precision and Ultra-Fine Products. Precision Engineering 16 1 (1994) 5-24
141. Shaw M.C. The Size Effects in Metal Cutting. Sadhana 28 5 (2003) 875-896
142. Palmer W.B., and Oxley P.L.B. Mechanics of Orthogonal Machining. Proceedings of the Institute of Mechanical Engineers 173 24 (1959) 623-636
143. Johnson W. Some Slip-Line Fields for Swaging or Expanding Indenting, Extruding and Machining for Tools With Curved Dies. International Journal of Mechanical Sciences 4 (1962) 323-347
144. Johnson W. Cutting With Tools Having a Rounded Edge - Some Theoretical Considerations. Annals of the CIRP 14 (1967) 315-319
145. Nakayama K., and Tamura K. Size Effect in Metal Cutting Force. ASME Transactions-Journal of Engineering for Industry 90 1 (1968) 119-126
146. Larsen-Basse J., and Oxley P.L.B. Effect of Strain-Rate Sensitivity on Scale Phenomenon in Chip Formation. Proceedings of the 13th MTDR Conference (1973) 209-216
147. Challen J.M., and Oxley P.L.B. Slip-Line Fields for Explaining the Mechanics of Polishing and Related Processes. International Journal of Mechanical Sciences 26 6-8 (1984) 403-418
148. Kopalinski E., and Oxley P.L.B. Size Effect in Metal Removal Processes. Proceedings of the Mechanical Properties at High Rate of Strain. Oxford, United Kingdom (1984) 389-396
149. Kopalinski E., Oxley P.L.B., and Young H.T. A Strain-Hardening Slip Line Field Analysis of the Plastic Deformation Observed in a Model Asperity Interaction Experiment. International Journal of Mechanics and Physical Solids 38 6 (1990) 765-785
150. Masuko M. Fundamental Research on the Metal Cutting. 1. A New Analysis of Cutting Force. Transactions of the Society of Mechanical Engineers (Japan) 19 (1953) 32-39
151. Albrecht P. New Developments in the Theory of the Metal Cutting Processes. ASME Transactions, Journal of Engineering for Industry November (1960) 348-358
152. Armarego E.J.A., and Brown R.H. On the Size Effect in Metal Cutting. International Journal of Production Research 1 3 (1961) 75-99
153. Khaet G.L., and Vasilyuk G.D. Effect of a Rounded Cutting-Edge on Cemented Carbide Tools. Russian Engineering Journal 4 (1970) 81-84
154. Abdelmoneim M.Es., and Scrutton R.S. Post-Machining Plastic Recovery and the Law of Abrasive Wear. Wear 24 (1973) 1-13
155. Abdelmoneim M.Es., and Scrutton R.S. Tool Edge Roundness and Stable Build-Up Formation in Finish Machining, ASME Transactions. Journal of Engineering for Industry November (1974) 1258-1267
156. Taminiau D.A., and Dautzenberg J.H. Bluntness of the Tool and Process Forces in High Precision Cutting. Annals of the CIRP 40 1 (1991) 65-68
157. Lucca D.A., and Seo Z.W. Effect of Tool Edge Geometry on Energy Dissipation in Ultraprecision Machining. Annals of the CIRP 42 1 (1993) 83-86
158. Lucca D.A., and Seo Z.W. Aspects of Surface Generation in Orthogonal Ultraprecision Machining. Annals of the CIRP 43 1 (1994) 43-46
159. Arsecularatne J.A. On Tool-Chip Interface Stress Distributions, Ploughing Force and Size Effect in Machining. International Journal of machine tools and manufacture 37 7 (1997) 885
160. Oxley P.L.B. Mechanics of Machining: An Analytical Approach to Assessing Machinability (1989), Ellis Horwood, Chichester, United Kingdom
161. Dinesh D., Swaminathan S., Chandrasekar S., and Farris T.N. An Intrinsic Size-Effect in Machining Due to The Strain Gradient. ASME/MED-IMECE 12 (2001) 197-204
162. Bissacco G., Hansen H.N., and Slunsky J. Modelling the Cutting Edge Radius Size Effect for Force Prediction in Micro Milling. Annals of the CIRP 57 (2008) 113-116
163. Clos R., Schreppel U., and Veit P. Chipformation and Strain Localization in 100Cr6. In: Vollertsen F., and Hollmann F. (Eds). Strahltechnik vol. 24 (2003), BIAS-Verlag, Bremen 161-168
164. Clos R., Radoch S., Schreppel U., Veit P., et al. Size Effect at Chip Formation in 100Cr6. In: Vollertsen F., and Yuan S. (Eds). Proceedings of the 2nd International Conference on New Forming Technology (2007), BIAS-Verlag, Bremen 511-519
165. Denkena B., Boehnke D., and Köhler J. Influence of the Rake Angle on the Chip Formation in Form Turning Process. In: Vollertsen F., and Yuan S. (Eds). Proceedings of the 2nd International Conference on New Forming Technology (2007), BIAS-Verlag, Bremen 521-530
166. Denkena B., Becker J.C., and Jivishov V. Scaling Effects on Chip Formation and Forces in Hard Turning. In: Vollertsen F., and Hollmann F. (Eds). Strahltechnik vol. 24 (2003), BIAS-Verlag, Bremen 113-119
167. Denkena B., Becker J.C., and Jivishov V. Scaling Effects on Chip Formation, Forces and Surface Layer in Hard Turning. 8th CIRP International Workshop on Modeling of Machining Operations. Mai 10/11, Chemnitz (2005) 87-91
168. Denkena B., Clos R., Veit P., Jivishov V., and Meyer R. Influence of the Cutting Edge Geometry on the Chip Formation in Machining. In: Vollertsen F., and Yuan S. (Eds). Proceedings of the 2nd International Conference on New Forming Technology (2007), BIAS-Verlag, Bremen 491-498
169. Stoll A., Leopold J., and Neugebauer R. Hybrid Methods for Analyzing Burr Formation in 2D-Orthogonal Cutting. Proceedings of the 9th CIRP Workshop on Modeling of Machining Operations (2006) 441-448
170. Dornfeld D.A., Min S., and Takeyuchi Y. Recent Advances in Mechanical Micromachining. Annals of the CIRP 55 2 (2006) 745-768
171. Manjunathaiah J., and Endres W.J. A New Model and Analysis of Orthogonal Machining With an Edge-Radiused Tool. Journal of Manufacturing Science and Engineering 122 (2000) 384-390
172. Schimmel R.J., Endres W.J., and Stevenson R. Application of an Internally Consistent Material Model to Determine the Effect of Tool Edge Geometry in Orthogonal Machining. Journal of Manufacturing Science and Engineering 124 (2002) 536-543
173. Joshi S.S., and Melkote S.N. An Explanation for the Size-Effect in Machining Using Strain Gradient Plasticity. Journal of Manufacturing Science and Engineering 126 (2004) 679-684
174. Liu K., and Melkote S.N. Material Strengthening Mechanisms and Their Contribution to Size Effect in Micro-Cutting. Journal of Manufacturing Science and Engineering 128 3 (2006) 730-738
175. Abebe M., and Appl F.C. A Slip-Line Solution for Negative Rake Angle Cutting. Proceedings of the 9th North American Manufacturing Research Conference. University Park, PA (1981) 341-348
176. Abebe M., and Appl F.C. Theoretical Analysis of the Basic Mechanics of Abrasive Processes. Part II. Model of the Ploughing Process. Wear 126 (1988) 267-283
177. Fang N. Slip-Line Modeling of Machining With a Rounded-Edge Tool. Journal of the Mechanics and Physics of Solids 51 (2003) 715-762
178. Fang N., Jawahir I.S., and Oxley P.L.B. A Universal Slip-Line Model With Non-Unique Solutions for Machining With Curled Chip Formation and a Restricted Contact Tool. International Journal of Mechanical Science 43 (2001) 557-580
179. Jawahir I.S., and Wang X. Development of Hybrid Predictive Models and Optimization Techniques for Machining Operations. Journal of Materials Processing Technology 185 (2007) 46-59
180. Wang X., and Jawahir I.S. Recent Advances in Plasticity Applications in Metal Machining: Slip-Line Models for Machining With Rounded Cutting Edge Restricted Contact Grooved Tools. International Journal of Machining and Machinability of Materials 2 1 (2007) 347-360
181. Wang X, Jawahir IS (2009) Predictive Modelling and Validation of Size Effects in Orthogonal Cutting With Rounded Cutting Edge Tools Using the Extended Universal Slip-Line Model. International Journal of Mechanical Sciences.
182. Kim K.W., Lee W.Y., and Sin H. A Finite Element Analysis for the Characteristics of Temperature and Stress in Micro-Machining Considering the Size Effects. International Journal of Machine Tools & Manufacture 39 (1999) 1507-1524
183. Özel T., and Altan T. Determination of Workpiece Flow Stress and Friction at the Chip-Tool Contact for High-Speed Cutting. International Journal of Machine Tools & Manufacture 40 (2000) 133-152
184. Yen Y., Jain A., and Altan T. A Finite Element Analysis of Orthogonal Machining Using Different Tool Edge Geometries. Journal of Materials Processing Technology 146 1 (2004) 72-81
185. Ee K.C., Dillon O.W., and Jawahir I.S. Finite Element Modeling of Residual Stresses in Machining Induced by Cutting Tool with a Finite Edge Radius. International Journal of Mechanical Sciences 47 (2005) 1611-1628
186. Simoneau A., Ng E., and Elbestawi M.A. The Effect of Microstructure on Chip Formation and Surface Defects in Microscale, Mesoscale, and Macroscale Cutting of Steel. Annals of the CIRP 55 1 (2006) 97-102
187. Simoneau A., Ng E., and Elbestawi M.A. Chip Formation During Microscale Cutting of a Medium Carbon Steel. International Journal of Machine Tools and Manufacture 46 (2006) 467-481
188. Liu K., and Melkote S.N. Finite Element Analysis of the Influence of Tool Edge Radius on Size Effect in Orthogonal Micro-Cutting Process. International Journal of Mechanical Sciences 49 (2007) 650-660
189. Weber M., Hockrainer T., Gumbsch P., Autenrieth H., Delonnoy L., Schulze V., Löhe D., Kotsschen-Reuther J., and Fleischer J. Investigation of Size Effects in Machining With Geometrically Defined Cutting Edges. Machining Science and Technology 11 (2007) 447-473
190. Kotschenreuther J., Delonnoy L., Hochrainer T., Schmidt J., Fleischer J., Schulze V., Löhe D., and Gumbsch P. Modelling Simulation and Experimental Tests for Process Scaling of Cutting Processes With Geometrically Defined Edge. In: Vollertsen F., and Hollmann F. (Eds). Strahltechnik vol. 24 (2003), BIAS-Verlag, Bremen 121-136
191. Hochrainer T., Delonnoy L., Kotschenreuther J., Schulze V., Löhe D., Gumbsch P., and Fleischer J. An Integrated Approach to the Modeling of Size-Effects in Machining With Geometrically Defined Cutting Edges. Proceedings of the 8th CIRP International Workshop on Modeling of Machining Operations (2005) 123-130
192. Kotschenreuther J., Autenrieth H., Weber M.J., Fleischer J., Schulze V., Löhe D., and Gumbsch P. Influence of Multiple Machining Steps on the Specific Cutting Force and Surface Characteristics in Micro Cutting. In: Vollertsen F., and Yuan S. (Eds). Proceedings of the 2nd International Conference on New Forming Technology (2007), BIAS-Verlag, Bremen 551-562
193. Autenrieth H., Weber M., Kotschenreuther J.J., Schulze V., Löhe D., Gumbsch P., and Fleischer J. Influence of Friction and Process Parameters on the Specific Cutting Force and Surface Characteristics in Micro Cutting. Proceedings of the 10th CIRP Workshop on Modeling of Machining Operations (2007) 539-546
194. Outeiro J.C. Influence of Tool Sharpness on the Thermal and Mechanical Phenomena Generated During Machining Operations. Journal of Machining and Machinability of Materials 2 3-4 (2007) 413-432
195. Outeiro J.C., Dias A.M., and Jawahir I.S. On the Effects of Residual Stresses Induced by Coated and Uncoated Cutting Tools With Finite Edge Radii in Turning Operations. Annals of the CIRP 55 1 (2006) 111-116
196. Wanigarathne PC, Dillon OW, Jawahir IS (2009) A Finite Element Study of Size Effects in Finish Machining With Coated Edge Radius Tools. International Journal of Mechanical Sciences.
197. Subbiah S., and Melkote S.N. The Constant Force Component Due to Material Separation and Its Contribution to the Size Effect in Specific Cutting Energy. Journal of Manufacturing Science and Engineering 128 (2006) 811-815
198. Atkins A.G. Modelling Metal Cutting Using Modern Ductile Fracture Mechanics: Quantitative Explanations for Some Longstanding Problems. International Journal of Mechanical Sciences 45 (2003) 373-396
199. Kotschenreuther J., Delonnoy L., Hochrainer T., Schmidt J., Fleischer J., Schulze V., Löhe D., and Gumbsch P. Influences of Process Scaling in Metal Cutting with Geometrically Defined Cutting Edges. In: Brinksmeier E., Corbett J., Evans C.J., Hocken R., Kiyono S., Weck M., Kim S.-W., Peggs G., McKeown, and Burke T. (Eds). Proceedings of the 4th Euspen. Glasgow (2004) 173-174
200. Shawky A.M., and Elbestawi M.A. An Enhanced Dynamic Model in Turning Including the Effect of Ploughing Force. ASME J. Manufacturing Science and Engineering 119 1 (1997) 10-20
201. van Luttervelt C.A., Childs T.H.C., Jawahir I.S., Klocke F., and Venuvinod P.K. Present Situation and Future Trends in Modeling of Machining Operations. Annals of the CIRP 47 2 (1998) 587-626
202. Redetzky M., Balaji A.K., and Jawahir I.S. Predictive Modelling of Cutting Forces and Chip Flow in Machining With Nose Radius Tools. Proceedings of the 2nd CIRP International Workshop on Modelling of Machining Operations, January. Nantes, France (1999) 160-180
203. Balaji A.K., and Jawahir I.S. A Machining Performance Study in Dry Contour Turning of Aluminum Alloys With Flat-Faced and Grooved Diamond Tools. Machining Science and Technonogy 5 2 (2001) 269-289
204. Chen S., and Jawahir I.S. The Influence of Cutting Edge Radius on Surface Integrity and Size Effects in Dry Turning of Automotive Aluminum Alloy A356 with Diamond Tools. Proceedings of the 11th CIRP Conference on Modeling of Machining Operations. Gaithersburg, MD, USA (2008) 247-254
205. Klocke F., Gerschwiler K., and Risse K. Modelling of Dimensional Influences in Drilling and Threading - Scaling Effects in Drilling of Steel. In: Vollertsen F., and Hollmann F. (Eds). Strahltechnik vol. 24 (2003), BIAS-Verlag, Bremen 169-176
206. Klocke F., Lung D., Gerschwiler K., Abouridouane M., et al. 3D Modeling and Scaling Effects in Drilling. Proceedings of the 9th CIRP Workshop on Modeling of Machining Operations (2006) 263-269
207. Klocke F., Lung D., Gerschwiler K., and Abouriduane M. Size Effects of the Cutting Edge Rounding on the Minimum Uncut Chip Thickness and 3D FE Modeling in Drilling. Proceedings of the 10th CIRP Workshop on Modelling of Machining Operations (2007) 197-205
208. Klocke F., Gerschwiler K., and Abouriduane M. Size Effects of the Tool Edge Radius on Specific Cutting Energy and Chip Formation in Drilling. In: Vollertsen F., and Yuan S. (Eds). Proceedings of the 2nd International Conference on New Forming Technology (2007), BIAS-Verlag, Bremen 499-509
209. Lugscheider E., Papenfuß-Janzen N., and Hurevich V. Simulation of Geometrical Influences of PVD Hard Coatings on the Micro Drills. In: Vollertsen F., and Hollmann F. (Eds). Strahltechnik vol. 24 (2003), BIAS-Verlag, Bremen 153-159
210. Bobzin K., Nickel R., Parkot D., and Hurevich V. Theoretical Study of the Influence of a PVD Hard Coating on the Dynamic Properties of the Micro Drilling Process. In: Vollertsen F., and Yuan S. (Eds). Proceedings of the 2nd International Conference on New Forming Technology (2007), BIAS-Verlag, Bremen 531-538
211. Dix M., Leopold J., and Neugebauer R. Modelling, Simulations and Experimental Verification of Size Effects in Burr Formation. In: Vollertsen F., and Yuan S. (Eds). Proceedings of the 2nd International Conference on New Forming Technology (2007), BIAS-Verlag, Bremen 471-480
212. Ko J.H., Yun W., Cho D., and Ehmann K.F. Development of Virtual Machining System. Part 1. Approximation of the Size Effect for Cutting Force Prediction. International Journal of Machine Tools & Manufacture 42 (2002) 1595-1605
213. Junz Wang J.-J., and Zheng C.W. An Analytical Force Model With Shearing and Ploughing Mechanisms in End Milling. International Journal of Machine Tools and Manufacture 42 (2002) 761-771
214. Vogler M.P., DeVor R.E., and Kapoor S.G. On the Modelling and Analysis of Machining Performance in Micro-Endmilling. Part II. Cutting Force Prediction. Journal of Manufacturing Science and Engineering 126 (2004) 694-705
215. Bissacco G., Hansen H.N., and Chiffre L. Size Effects on Surface Generation in Micro Milling of Hardened Tool Steel. Annals of the CIRP 55 1 (2006) 593-596
216. Kahnis P., and Weinert K. Analysis of Tool Influences on High-Precision-Micromilling of Steel Work-Pieces. Proceedings of the 6th euspen International Conference. Baden bei Wien (2006). 0-9553082-0-8 128-131
217. Weinert K., and Kahnis P. Analysis of Tool Influences on Downscaled Milling Processes. In: Vollertsen F., and Yuan S. (Eds). Proceedings of the 2nd International Conference on New Forming Technology (2007), BIAS-Verlag, Bremen 481-490
218. Biermann D., Kahnis P., and Surmann T. Analysis and Simulation of Cutting Forces in Downscaled Milling Processes. Proceedings of the 10th CIRP International Workshop on Modeling of Machining Operations. Reggio Calabria (2007) 493-499
219. Weinert K., Kahnis P., and Koehler W. Investigation of Scaling Effects on Modelling and Simulation of Scaled Milling Processes. In: Vollertsen F., and Hollmann F. (Eds). Strahltechnik vol. 24 (2003), BIAS-Verlag, Bremen 107-112
220. Uhlmann E., Graf v.d., and Schulenburg M. Scaling of the Milling Process of Tungsten-Copper-Composites - Experimental and Numerical Research. In: Vollertsen F., and Yuan S. (Eds). Proceedings of the 2nd International Conference on New Forming Technology (2007), BIAS-Verlag, Bremen 541-550
221. Uhlmann E., Schauer K., and Jerzembeck S. Modelling of Scaling Effects during the Scaling of the Chipping Process of a W-Cu-Particle Compound Material. In: Vollertsen F., and Hollmann F. (Eds). Strahltechnik vol. 24 (2003), BIAS-Verlag, Bremen 177-184
222. Graf v.d., Schulenburg M., and Uhlmann E. Scaling Effects in Milling Operations of Tungsten-Copper-Composites. Proceedings of the International Conference on Mechanical and Manufacturing Engineering (2008), Johor Bahru, Malaysia (in print)
223. Biermann D., and Kahnis P. Influence of a Downscaling of the Tool Diameter on the Dynamic Behaviour of Micromilling Processes. In: Byrne G., and O'Donnel G. (Eds). Proceedings of the 3rd CIRP International Conference High Performance Cutting (HPC). Dublin, Ireland, June 12-13, 2008 (2008). 978-1-905254-32-3 169-178
224. Lai X., Li H., Li C., Lin Z., and Ni J. Modelling and Analysis of Micro Scale Milling Considering Size Effect, Micro Cutter Edge Radius and Minimum Chip Thickness. International Journal of Machine Tools & Manufacture 48 (2008) 1-14
225. Kannappan S., and Malkin S. Effects of Grain Size and Operating Parameters on the Mechanics of Grinding. Trans. ASME - J. Eng. For. Industry 94 (1972) 833-842
226. Malkin S. Specific Energy and Mechanisms in Abrasive Processes. Proceedings of the 3rd NAMRC (North American Manufacturing Research Conference). Carnegie Press (1975) 453-465
227. Brinksmeier E., and Giwerzew A. Characterization of the Size Effect and Its Influence on the Workpiece Residual Stresses in Grinding. In: Vollertsen F., and Hollmann F. (Eds). Strahltechnik vol. 24 (2003), BIAS-Verlag, Bremen 137-144
228. Brinksmeier E., and Bleil N. Using the Size Effect of Specific Energy in Grinding for Work Hardening. International Journal of Manufacturing Technology and Management (2007) 259-269 12/1/2/3
229. Heinzel C., and Bleil N. The Use of the Size Effect in Grinding for Work-Hardening. Annals of the CIRP 56 1 (2007) 327-330
230. Outeiro J.C., Kandibanda R., Pina J.C., Dillon O.W., and Jawahir I.S. Size Effects in Machining and its Influence on Product Sustainability. Proceedings of the 15the CIRP Conference on Life Cycle Engineering. Sydney, Australia, March (2008) 658-663
231. Vollertsen F. In: Buschow J., Kopp R., et al. (Eds). Metal Forming: Microparts, Encyclopaedia of Materials: Science and Technology (2001), Elsevier, Amsterdam 5424-5427