-
1
-
-
9744250177
-
Workpiece surface integrity and tool life issues when turning Inconel 718 nickel based superalloy
-
A.R.C. Sharman, J.J. Hughes, and K. Ridgway Workpiece surface integrity and tool life issues when turning Inconel 718 nickel based superalloy Machining Science and Technology 8 3 2004 399 414
-
(2004)
Machining Science and Technology
, vol.8
, Issue.3
, pp. 399-414
-
-
Sharman, A.R.C.1
Hughes, J.J.2
Ridgway, K.3
-
3
-
-
73449110054
-
A review of surface integrity in machining and its impact on functional performance and life of machined products
-
R. MSaoubi, J.C. Outeiro, H. Chandrasekaran, O.W. Dillon Jr., and I.S. Jawahir A review of surface integrity in machining and its impact on functional performance and life of machined products International Journal of Sustainable Manufacturing 1 12 2008 203 236
-
(2008)
International Journal of Sustainable Manufacturing
, vol.1
, Issue.12
, pp. 203-236
-
-
Msaoubi, R.1
Outeiro, J.C.2
Chandrasekaran, H.3
Dillon Jr., O.W.4
Jawahir, I.S.5
-
4
-
-
73449102550
-
Surface integrity characterization and prediction in machining of hardened and difficult-to-machine alloys; A state-of-the-art research review and analysis
-
Y.B. Guo, W. Li, and I.S. Jawahir Surface integrity characterization and prediction in machining of hardened and difficult-to-machine alloys; a state-of-the-art research review and analysis Machining Science and Technology 13 2009 437 470
-
(2009)
Machining Science and Technology
, vol.13
, pp. 437-470
-
-
Guo, Y.B.1
Li, W.2
Jawahir, I.S.3
-
5
-
-
3142731454
-
Modeling the effects of flank wear land and chip formation on residual stresses
-
L. Chen, T.I. El-Wardany, and W.C. Harris Modeling the effects of flank wear land and chip formation on residual stresses CIRP AnnalsManufacturing Technology 53 1 2004 95 98
-
(2004)
CIRP AnnalsManufacturing Technology
, vol.53
, Issue.1
, pp. 95-98
-
-
Chen, L.1
El-Wardany, T.I.2
Harris, W.C.3
-
7
-
-
12144261263
-
Tool wear characteristics of binderless CBN tools used in high-speed milling of titanium alloys
-
Z.G. Wang, M. Rahman, and Y.S. Wong Tool wear characteristics of binderless CBN tools used in high-speed milling of titanium alloys Wear 258 2005 752 758
-
(2005)
Wear
, vol.258
, pp. 752-758
-
-
Wang, Z.G.1
Rahman, M.2
Wong, Y.S.3
-
10
-
-
64249122563
-
A comprehensive experimental study on surface integrity by end milling Ti-6Al-4V
-
J. Sun, and Y.B. Guo A comprehensive experimental study on surface integrity by end milling Ti-6Al-4V Journal of Materials Processing Technology 209 2009 4036 4042
-
(2009)
Journal of Materials Processing Technology
, vol.209
, pp. 4036-4042
-
-
Sun, J.1
Guo, Y.B.2
-
11
-
-
72449163180
-
Microstructural damage during high-speed milling of titanium alloys
-
M. Thomas, S. Turner, and M. Jackson Microstructural damage during high-speed milling of titanium alloys Scripta Materialia 62 2010 250 253
-
(2010)
Scripta Materialia
, vol.62
, pp. 250-253
-
-
Thomas, M.1
Turner, S.2
Jackson, M.3
-
12
-
-
33847242616
-
Performance of alloyed uncoated and CVD-coated carbide tools in dry milling of titanium alloy Ti-6242S
-
C.H. Che-Haron, A. Ginting, and H. Arshad Performance of alloyed uncoated and CVD-coated carbide tools in dry milling of titanium alloy Ti-6242S Journal of Materials Processing Technology 185 2007 77 82
-
(2007)
Journal of Materials Processing Technology
, vol.185
, pp. 77-82
-
-
Che-Haron, C.H.1
Ginting, A.2
Arshad, H.3
-
13
-
-
33846811506
-
Optimal cutting conditions when dry end milling the aeroengine material Ti-6242S
-
A. Ginting, and M. Nouari Optimal cutting conditions when dry end milling the aeroengine material Ti-6242S Journal of Materials Processing Technology 184 2007 319 324
-
(2007)
Journal of Materials Processing Technology
, vol.184
, pp. 319-324
-
-
Ginting, A.1
Nouari, M.2
-
15
-
-
0035803544
-
Tool life and surface integrity in turning titanium alloy
-
C.H. Che-Haron Tool life and surface integrity in turning titanium alloy Journal of Materials Processing Technology 118 2001 231 237
-
(2001)
Journal of Materials Processing Technology
, vol.118
, pp. 231-237
-
-
Che-Haron, C.H.1
-
16
-
-
0038110555
-
Effect of machining parameters and heat treatment on the residual stress distribution in titanium alloy IMI-834
-
B.R. Sridhar, G. Devananda, K. Ramachandra, and R. Bhat Effect of machining parameters and heat treatment on the residual stress distribution in titanium alloy IMI-834 Journal of Materials Processing Technology 139 2003 628 634
-
(2003)
Journal of Materials Processing Technology
, vol.139
, pp. 628-634
-
-
Sridhar, B.R.1
Devananda, G.2
Ramachandra, K.3
Bhat, R.4
-
20
-
-
0030949662
-
Temperature and wear of cutting tools in high-speed machining of Inconel 718 and Ti6Al6V2Sn
-
T. Kitagawa, A. Kubo, and K. Maekawa Temperature and wear of cutting tools in high-speed machining of Inconel 718 and Ti6Al6V2Sn Wear 202 1997 142 148
-
(1997)
Wear
, vol.202
, pp. 142-148
-
-
Kitagawa, T.1
Kubo, A.2
Maekawa, K.3
-
22
-
-
55949084538
-
High temperature deformation behavior of αβ-type biomedical titanium alloy Ti6Al7Nb
-
W.F. Cui, Z. Jin, A.H. Guo, and L. Zhou High temperature deformation behavior of αβ-type biomedical titanium alloy Ti6Al7Nb Materials Science and Engineering A 499 2009 252 256
-
(2009)
Materials Science and Engineering A
, vol.499
, pp. 252-256
-
-
Cui, W.F.1
Jin, Z.2
Guo, A.H.3
Zhou, L.4
-
24
-
-
0023109640
-
Surface region damage of machined Inconel 718 nickelbase superalloy using natural and controlled contact length tools
-
A.B. Sadat Surface region damage of machined Inconel 718 nickelbase superalloy using natural and controlled contact length tools Wear 119 1987 225 235
-
(1987)
Wear
, vol.119
, pp. 225-235
-
-
Sadat, A.B.1
-
25
-
-
9744258203
-
Plastic deformation analysis in machining of Inconel 718 nickel base superalloy using both experimental and numerical methods
-
A.B. Sadat, M.Y. Reddy, and B.P. Wang Plastic deformation analysis in machining of Inconel 718 nickel base superalloy using both experimental and numerical methods International Journal of Mechanical Sciences 33 10 1991 829 842
-
(1991)
International Journal of Mechanical Sciences
, vol.33
, Issue.10
, pp. 829-842
-
-
Sadat, A.B.1
Reddy, M.Y.2
Wang, B.P.3
-
26
-
-
0029408847
-
Surface abuse when machining cast iron (G-17) and nickel-base superalloy (Inconel 718) with ceramic tools
-
E.O. Ezugwu, and S.H. Tang Surface abuse when machining cast iron (G-17) and nickel-base superalloy (Inconel 718) with ceramic tools Journal of Materials Processing Technology 55 1995 63 69
-
(1995)
Journal of Materials Processing Technology
, vol.55
, pp. 63-69
-
-
Ezugwu, E.O.1
Tang, S.H.2
-
27
-
-
0030111764
-
Carbide tool wear mechanism in turning of Inconel 718 superalloy
-
Y.S. Liao, and R.H. Shiue Carbide tool wear mechanism in turning of Inconel 718 superalloy Wear 193 1996 16 24
-
(1996)
Wear
, vol.193
, pp. 16-24
-
-
Liao, Y.S.1
Shiue, R.H.2
-
28
-
-
79551687296
-
High speed milling of difficult to machine alloys
-
D. Dudzinski, A. Devillez, A. Moufki, D. Larrouquerre, V. Zerrouki, J. Vigneau (Eds.)
-
S. Derrien, J. Vigneau, High speed milling of difficult to machine alloys, in: D. Dudzinski, A. Devillez, A. Moufki, D. Larrouquerre, V. Zerrouki, J. Vigneau (Eds.), A review of developments towards dry and high speed machining of Inconel 718 alloy, International Journal of Machine Tools and Manufacture 44 (2004) 439456.
-
(2004)
A Review of Developments Towards Dry and High Speed Machining of Inconel 718 Alloy, International Journal of Machine Tools and Manufacture
, vol.44
, pp. 439-456
-
-
Derrien, S.1
Vigneau, J.2
-
30
-
-
0032838561
-
Tool life and surface integrity when machining Inconel 718 with PVD and CVD coated tools
-
E.O. Ezugwu, Z.M. Wang, and C.I. Okeke Tool life and surface integrity when machining Inconel 718 with PVD and CVD coated tools Tribology Transactions 42 2 1999 353 360
-
(1999)
Tribology Transactions
, vol.42
, Issue.2
, pp. 353-360
-
-
Ezugwu, E.O.1
Wang, Z.M.2
Okeke, C.I.3
-
31
-
-
0033900772
-
The impact of tool material and the cutting parameters on surface roughness of supermet 718 nickel superalloy
-
S.M. Darwish The impact of tool material and the cutting parameters on surface roughness of supermet 718 nickel superalloy Journal of Materials Processing Technology 97 2000 10 18
-
(2000)
Journal of Materials Processing Technology
, vol.97
, pp. 10-18
-
-
Darwish, S.M.1
-
32
-
-
0037063862
-
High speed cutting of Inconel 718 with coated carbide and ceramic inserts
-
L. Li, N. He, M. Wang, and Z.G. Wang High speed cutting of Inconel 718 with coated carbide and ceramic inserts Journal of Materials Processing Technology 129 13 2002 127 130
-
(2002)
Journal of Materials Processing Technology
, vol.129
, Issue.13
, pp. 127-130
-
-
Li, L.1
He, N.2
Wang, M.3
Wang, Z.G.4
-
33
-
-
0036430646
-
Residual stresses in a nickel-based superalloy introduced by turning
-
C. Schlauer, R.L. Peng, and M. Oden Residual stresses in a nickel-based superalloy introduced by turning Material Science Forum 404407 2002 173 178
-
(2002)
Material Science Forum
, vol.404-407
, pp. 173-178
-
-
Schlauer, C.1
Peng, R.L.2
Oden, M.3
-
36
-
-
2042440401
-
Some effects of cutting edge preparation and geometric modifications when turning Inconel 718 at high cutting speeds
-
R.T. Coelho, L.R. Silva, A. Braghini Jr., and A.A. Bezerra Some effects of cutting edge preparation and geometric modifications when turning Inconel 718 at high cutting speeds Journal of Materials Processing Technology 148 1 2004 147 153
-
(2004)
Journal of Materials Processing Technology
, vol.148
, Issue.1
, pp. 147-153
-
-
Coelho, R.T.1
Silva, L.R.2
Braghini Jr., A.3
Bezerra, A.A.4
-
37
-
-
79551681194
-
Influence of machining conditions on residual stresses
-
D. Dudzinski, A. Devillez, A. Moufki, D. Larrouquerre, V. Zerrouki, J. Vigneau (Eds.)
-
L. Guerville, J. Vigneau, Influence of machining conditions on residual stresses, in: D. Dudzinski, A. Devillez, A. Moufki, D. Larrouquerre, V. Zerrouki, J. Vigneau (Eds.), A review of developments towards dry and high speed machining of Inconel 718 alloy, International Journal of Machine Tools and Manufacture 44 (2004) 439456.
-
(2004)
A Review of Developments Towards Dry and High Speed Machining of Inconel 718 Alloy, International Journal of Machine Tools and Manufacture
, vol.44
, pp. 439-456
-
-
Guerville, L.1
Vigneau, J.2
-
38
-
-
0346640511
-
A review of developments towards dry and high speed machining of Inconel 718 alloy
-
D. Dudzinski, A. Devillez, A. Moufki, D. Larrouquerre, V. Zerrouki, and J. Vigneau. A review of developments towards dry and high speed machining of Inconel 718 alloy International Journal of Machine Tools and Manufacture 44 2004 439 456
-
(2004)
International Journal of Machine Tools and Manufacture
, vol.44
, pp. 439-456
-
-
Dudzinski, D.1
Devillez, A.2
Moufki, A.3
Larrouquerre, D.4
Zerrouki, V.5
Vigneau, J.6
-
43
-
-
33750046676
-
Turning of advanced Ni based alloys obtained via powder metallurgy route
-
D.A. Axinte, P. Andrews, W. Li, N. Gindy, and P.J. Withers Turning of advanced Ni based alloys obtained via powder metallurgy route Annals of the CIRP 55 2006
-
(2006)
Annals of the CIRP
, vol.55
-
-
Axinte, D.A.1
Andrews, P.2
Li, W.3
Gindy, N.4
Withers, P.J.5
-
44
-
-
34547819214
-
The influence of cutter orientation and workpiece angle on machinability when high-speed milling Inconel 718 under finishing conditions
-
D.K. Aspinwall, R.C. Dewes, E.-G. Ng, C. Sage, and S.L. Soo The influence of cutter orientation and workpiece angle on machinability when high-speed milling Inconel 718 under finishing conditions International Journal of Machine Tools and Manufacture 47 2007 1839 1846
-
(2007)
International Journal of Machine Tools and Manufacture
, vol.47
, pp. 1839-1846
-
-
Aspinwall, D.K.1
Dewes, R.C.2
Ng, E.-G.3
Sage, C.4
Soo, S.L.5
-
47
-
-
43649083995
-
Analysis of residual stresses induced by dry turning of difficult-to-machine materials
-
J.C. Outeiro, J.C. Pina, R. MSaoubi, F. Pusavec, and I.S. Jawahir Analysis of residual stresses induced by dry turning of difficult-to-machine materials CIRP AnnalsManufacturing Technology 57 2008 77 80
-
(2008)
CIRP AnnalsManufacturing Technology
, vol.57
, pp. 77-80
-
-
Outeiro, J.C.1
Pina, J.C.2
Msaoubi, R.3
Pusavec, F.4
Jawahir, I.S.5
-
49
-
-
70349786425
-
Investigation of machining performance in high-pressure jet assisted turning of Inconel 718: An experimental study
-
C. Courbon, D. Kramar, P. Krajnik, F. Pusavec, J Rech, and J Kopac Investigation of machining performance in high-pressure jet assisted turning of Inconel 718: an experimental study International Journal of Machine Tools and Manufacture 49 2009 1114 1125
-
(2009)
International Journal of Machine Tools and Manufacture
, vol.49
, pp. 1114-1125
-
-
Courbon, C.1
Kramar, D.2
Krajnik, P.3
Pusavec, F.4
Rech, J.5
Kopac, J.6
-
52
-
-
85058133979
-
Finite element modeling of multi-pass machining of Inconel 718
-
Paper No. 84086, Lafayette, Indiana, USA, October 5-7
-
Y. Lu, C. Guo, Finite element modeling of multi-pass machining of Inconel 718, CD Proceedings of 2009 ASME International Conference on Manufacturing Science and Engineering, Paper No. 84086, Lafayette, Indiana, USA, October 57, 2009.
-
(2009)
CD Proceedings of 2009 ASME International Conference on Manufacturing Science and Engineering
-
-
Lu, Y.1
Guo, C.2
-
56
-
-
67349138696
-
A finite element modeling approach to predicting white layer formation in nickel superalloys
-
S. Ranganath, C. Guo, and P. Hegde A finite element modeling approach to predicting white layer formation in nickel superalloys CIRP AnnalsManufacturing Technology 58 2009 77 80
-
(2009)
CIRP AnnalsManufacturing Technology
, vol.58
, pp. 77-80
-
-
Ranganath, S.1
Guo, C.2
Hegde, P.3
-
57
-
-
0001461373
-
Mechanical and thermal response of a nickel-base superalloy upon grinding with high removal rates
-
W. sterle, and P.X. Li Mechanical and thermal response of a nickel-base superalloy upon grinding with high removal rates Materials Science and Engineering A 238 1997 357 366
-
(1997)
Materials Science and Engineering A
, vol.238
, pp. 357-366
-
-
Sterle, W.1
Li, P.X.2
-
58
-
-
28444441965
-
Microstructure and yield strength of UDIMET 720LI alloyed with Co-16.9 Wt Pct Ti
-
C. Cui, Y. Gu, H. Harada, and A. Sato Microstructure and yield strength of UDIMET 720LI alloyed with Co-16.9 Wt Pct Ti Metallurgical and Materials Transactions A 36A 2005 2921 2927
-
(2005)
Metallurgical and Materials Transactions A
, vol.36
, pp. 2921-2927
-
-
Cui, C.1
Gu, Y.2
Harada, H.3
Sato, A.4
-
59
-
-
56349115531
-
Parametric study of machining effect on residual stress and surface roughness of nickel base super alloy UDIMET 720
-
S.V. Joshi, S.P. Vizhian, B.R. Sridhar, and K. Jayaram Parametric study of machining effect on residual stress and surface roughness of nickel base super alloy UDIMET 720 Advanced Materials Research 4750 2008 13 16
-
(2008)
Advanced Materials Research
, vol.4750
, pp. 13-16
-
-
Joshi, S.V.1
Vizhian, S.P.2
Sridhar, B.R.3
Jayaram, K.4
-
61
-
-
20444478658
-
Key improvements in the machining of difficult-to-cut aerospace superalloys
-
E.O. Ezugwu Key improvements in the machining of difficult-to-cut aerospace superalloys International Journal of Machine Tools and Manufacture 45 2005 1353 1367
-
(2005)
International Journal of Machine Tools and Manufacture
, vol.45
, pp. 1353-1367
-
-
Ezugwu, E.O.1
-
62
-
-
36249025772
-
The design and manufacture of biomedical surfaces
-
J.J. Ramsden, D.M. Allen, D.J. Stephenson, J.R. Alcock, G.N. Peggs, G. Fuller, and G. Goch The design and manufacture of biomedical surfaces Annals of the CIRP 56 2 2007 687 711
-
(2007)
Annals of the CIRP
, vol.56
, Issue.2
, pp. 687-711
-
-
Ramsden, J.J.1
Allen, D.M.2
Stephenson, D.J.3
Alcock, J.R.4
Peggs, G.N.5
Fuller, G.6
Goch, G.7
-
64
-
-
3042731151
-
Biocompatibility of calcium phosphate-coated and of geometrically structured nickeltitanium (NiTi) by in vitro testing models
-
D Bogdanski, M. Epple, S.A. Esenwein, G. Muhr, V. Petzoldt, O. Prymak, K. Weinert, and M. Kller Biocompatibility of calcium phosphate-coated and of geometrically structured nickeltitanium (NiTi) by in vitro testing models Materials Science and Engineering A 378 2004 527 531
-
(2004)
Materials Science and Engineering A
, vol.378
, pp. 527-531
-
-
Bogdanski, D.1
Epple, M.2
Esenwein, S.A.3
Muhr, G.4
Petzoldt, V.5
Prymak, O.6
Weinert, K.7
Kller, M.8
-
65
-
-
3042824509
-
Machining of NiTi based shape memory alloys
-
DOI 10.1016/j.msea.2003.10.344, PII S092150930400005X
-
K. Weinert, and V. Petzoldt Machining of NiTi based shape memory alloys Materials Science and Engineering A 378 2004 180 184 (Pubitemid 38865666)
-
(2004)
Materials Science and Engineering A
, vol.378
, Issue.SPEC. ISS. 1-2
, pp. 180-184
-
-
Weinert, K.1
Petzoldt, V.2
-
68
-
-
0036964217
-
Effect of near-surface residual stress and microstructure modification from machining on the fatigue endurance of a tool steel
-
F. Ghanem, C. Braham, M.E. Fitzpatrick, and H. Sidhom Effect of near-surface residual stress and microstructure modification from machining on the fatigue endurance of a tool steel Journal of Materials Engineering and Performance 11 6 2002 631 639
-
(2002)
Journal of Materials Engineering and Performance
, vol.11
, Issue.6
, pp. 631-639
-
-
Ghanem, F.1
Braham, C.2
Fitzpatrick, M.E.3
Sidhom, H.4
-
70
-
-
0346724503
-
The effect of machined topography and integrity on fatigue life
-
D. Novovic, R.C. Dewes, D.K. Aspinwall, W. Voice, and P. Bowen The effect of machined topography and integrity on fatigue life International Journal of Machine Tools and Manufacture 44 2004 125 134
-
(2004)
International Journal of Machine Tools and Manufacture
, vol.44
, pp. 125-134
-
-
Novovic, D.1
Dewes, R.C.2
Aspinwall, D.K.3
Voice, W.4
Bowen, P.5
-
73
-
-
65149083644
-
Machined surface of AISI H13 tools steels when end milling using P10 TiN coated carbide tools
-
A.G. Jaharah, C.H. Che Hassan, and N. Muhamad Machined surface of AISI H13 tools steels when end milling using P10 TiN coated carbide tools European Journal of Scientific Research 26 2 2009 247 254
-
(2009)
European Journal of Scientific Research
, vol.26
, Issue.2
, pp. 247-254
-
-
Jaharah, A.G.1
Che Hassan, C.H.2
Muhamad, N.3
-
74
-
-
0031277987
-
Microstructures of surface white layer and internal white adiabatic shear band
-
B. Zhang, W. Shen, Y. Liu, X. Tang, and Y. Wang Microstructures of surface white layer and internal white adiabatic shear band Wear 211 1997 164 168
-
(1997)
Wear
, vol.211
, pp. 164-168
-
-
Zhang, B.1
Shen, W.2
Liu, Y.3
Tang, X.4
Wang, Y.5
-
75
-
-
27644556544
-
White layer formation in hard turning of H13 tool steel at high cutting speeds using CBN tooling
-
S.S. Bosheh, and P.T. Mativenga White layer formation in hard turning of H13 tool steel at high cutting speeds using CBN tooling International Journal of Machine Tools and Manufacture 46 2006 225 233
-
(2006)
International Journal of Machine Tools and Manufacture
, vol.46
, pp. 225-233
-
-
Bosheh, S.S.1
Mativenga, P.T.2
-
79
-
-
0142167360
-
Phase transformations in surface layers of machined steels investigated by X-ray diffraction and Mssbauer spectrometry
-
X. Sauvage, J.M. Le Breton, A. Guillet, A. Meyer, and J. Teillet Phase transformations in surface layers of machined steels investigated by X-ray diffraction and Mssbauer spectrometry Materials Science and Engineering A 362 2003 181 186
-
(2003)
Materials Science and Engineering A
, vol.362
, pp. 181-186
-
-
Sauvage, X.1
Le Breton, J.M.2
Guillet, A.3
Meyer, A.4
Teillet, J.5
-
80
-
-
44049093227
-
White layer formation due to phase transformation in orthogonal machining of AISI 1045 annealed steel
-
S. Han, S.N. Melkote, M.S. Haluska, and T. Watkins White layer formation due to phase transformation in orthogonal machining of AISI 1045 annealed steel Materials Science and Engineering A 488 2008 195 204
-
(2008)
Materials Science and Engineering A
, vol.488
, pp. 195-204
-
-
Han, S.1
Melkote, S.N.2
Haluska, M.S.3
Watkins, T.4
-
81
-
-
33750083646
-
Surface integrity difference between hard turned and ground surfaces and its impact on fatigue life
-
F. Hashimoto, Y.B. Guo, and A.W. Warren Surface integrity difference between hard turned and ground surfaces and its impact on fatigue life Annals of the CIRP 55 1 2006 81 84
-
(2006)
Annals of the CIRP
, vol.55
, Issue.1
, pp. 81-84
-
-
Hashimoto, F.1
Guo, Y.B.2
Warren, A.W.3
-
82
-
-
10944246634
-
Analysis of white layers formed in hard turning of AISI 52100 steel
-
A. Ramesh, S.N. Melkote, L.F. Allard, L. Riester, and T.R. Watkins Analysis of white layers formed in hard turning of AISI 52100 steel Materials Science and Engineering A 390 2005 88 97
-
(2005)
Materials Science and Engineering A
, vol.390
, pp. 88-97
-
-
Ramesh, A.1
Melkote, S.N.2
Allard, L.F.3
Riester, L.4
Watkins, T.R.5
-
84
-
-
77953190968
-
Experimental and finite element investigations on the influence of tool edge radius in machining nickel-based alloy
-
Paper No. 84362, Lafayette, Indiana, USA, October 5-7
-
T. zel, Experimental and finite element investigations on the influence of tool edge radius in machining nickel-based alloy, CD Proceedings of 2009 ASME International Conference on Manufacturing Science and Engineering, Paper No. 84362, Lafayette, Indiana, USA, October 5-7, 2009.
-
(2009)
CD Proceedings of 2009 ASME International Conference on Manufacturing Science and Engineering
-
-
Ozel, T.1
-
85
-
-
73249130799
-
Machining of high strength light weight alloys for engine applications
-
K. Weinert, D. Biermann, and S. Bergmann Machining of high strength light weight alloys for engine applications Annals of the CIRP 56 1 2007 105 108
-
(2007)
Annals of the CIRP
, vol.56
, Issue.1
, pp. 105-108
-
-
Weinert, K.1
Biermann, D.2
Bergmann, S.3
-
86
-
-
0037015550
-
Surface integrity of hot work tool steel after high speed milling-experimental data and empirical models
-
D.A. Axinte, and R.C. Dewes Surface integrity of hot work tool steel after high speed milling-experimental data and empirical models Journal of Materials Processing Technology 127 2002 325 335
-
(2002)
Journal of Materials Processing Technology
, vol.127
, pp. 325-335
-
-
Axinte, D.A.1
Dewes, R.C.2
-
88
-
-
0037698093
-
Investigation of surface integrity in high speed end milling of a low alloyed steel
-
P. Chevrier, A. Tidu, B. Bolle, P. Ccezard, and J.P. Tinnes Investigation of surface integrity in high speed end milling of a low alloyed steel International Journal of Machine Tools and Manufacture 43 2003 1135 1142
-
(2003)
International Journal of Machine Tools and Manufacture
, vol.43
, pp. 1135-1142
-
-
Chevrier, P.1
Tidu, A.2
Bolle, B.3
Ccezard, P.4
Tinnes, J.P.5
-
90
-
-
38349140123
-
Finite element modeling the influence of edge roundness on the stress and temperature fields induced by high-speed machining
-
T. zel, and E. Zeren Finite element modeling the influence of edge roundness on the stress and temperature fields induced by high-speed machining International Journal of Advanced Manufacturing Technology 35 2007 255 267
-
(2007)
International Journal of Advanced Manufacturing Technology
, vol.35
, pp. 255-267
-
-
Zel, T.1
Zeren, E.2
-
91
-
-
17844378475
-
Effect of feed rate, workpiece hardness and cutting edge on subsurface residual stress in the hard turning of bearing steel using chamferhone cutting edge geometry
-
J. Hua, R. Shivpuri, X. Cheng, V. Bedekar, Y. Matsumoto, F. Hashimoto, and T.R. Watkins Effect of feed rate, workpiece hardness and cutting edge on subsurface residual stress in the hard turning of bearing steel using chamferhone cutting edge geometry Materials Science and Engineering A 394 2005 238 248
-
(2005)
Materials Science and Engineering A
, vol.394
, pp. 238-248
-
-
Hua, J.1
Shivpuri, R.2
Cheng, X.3
Bedekar, V.4
Matsumoto, Y.5
Hashimoto, F.6
Watkins, T.R.7
-
92
-
-
30144441719
-
Investigation of cutting conditions and cutting edge preparations for enhanced compressive subsurface residual stress in the hard turning of bearing steel
-
D. Hua, R. Umbrello, and Shivpuri Investigation of cutting conditions and cutting edge preparations for enhanced compressive subsurface residual stress in the hard turning of bearing steel Journal of Materials Processing Technology 171 2006 180 187
-
(2006)
Journal of Materials Processing Technology
, vol.171
, pp. 180-187
-
-
Hua, D.1
Umbrello, R.2
Shivpuri3
-
93
-
-
0033225559
-
Residual stress analysis in orthogonal machining of standard and resulfurized AISI 316L steels
-
R. MSaoubi, J.C. Outeiro, B. Changeux, J.L. Lebrun, and A. Moro Dias Residual stress analysis in orthogonal machining of standard and resulfurized AISI 316L steels Journal of Materials Processing Technology 96 1999 225 233
-
(1999)
Journal of Materials Processing Technology
, vol.96
, pp. 225-233
-
-
Msaoubi, R.1
Outeiro, J.C.2
Changeux, B.3
Lebrun, J.L.4
Moro Dias, A.5
-
94
-
-
1842484355
-
The influence of rake angle, cutting speed and cutting depth on residual stresses in hard turning
-
P. Dahlman, F. Gunnberg, and M. Jacobson The influence of rake angle, cutting speed and cutting depth on residual stresses in hard turning Journal of Materials Processing Technology 147 2004 181 184
-
(2004)
Journal of Materials Processing Technology
, vol.147
, pp. 181-184
-
-
Dahlman, P.1
Gunnberg, F.2
Jacobson, M.3
-
95
-
-
13844298235
-
Residual stresses in turning part I: Influence of process parameters
-
E. Capello Residual stresses in turning part I: influence of process parameters Journal of Materials Processing Technology 160 2005 221 228
-
(2005)
Journal of Materials Processing Technology
, vol.160
, pp. 221-228
-
-
Capello, E.1
-
96
-
-
33746807280
-
Experimental and numerical modeling of residual stresses induced in orthogonal cutting of AISI 316L steel
-
J.C. Outeiro, D. Umbrello, and R. MSaoubi Experimental and numerical modeling of residual stresses induced in orthogonal cutting of AISI 316L steel International Journal of Machine Tools and Manufacture 46 2006 1786 1794
-
(2006)
International Journal of Machine Tools and Manufacture
, vol.46
, pp. 1786-1794
-
-
Outeiro, J.C.1
Umbrello, D.2
Msaoubi, R.3
-
97
-
-
38149100094
-
Effects of workpiece thermal properties on machining-induced residual stressesthermal softening and conductivity
-
M. Nasr, E.G. Ng, and M. Elbestawi Effects of workpiece thermal properties on machining-induced residual stressesthermal softening and conductivity Journal of Engineering Manufacture 221 2007 1387 1400
-
(2007)
Journal of Engineering Manufacture
, vol.221
, pp. 1387-1400
-
-
Nasr, M.1
Ng, E.G.2
Elbestawi, M.3
-
99
-
-
34247108105
-
Modeling white layer thickness based on the cutting parameters of hard machining
-
J. Shi, J.Y. Wang, and C.R. Liu Modeling white layer thickness based on the cutting parameters of hard machining Journal of Engineering Manufacture 220 2006 119 128
-
(2006)
Journal of Engineering Manufacture
, vol.220
, pp. 119-128
-
-
Shi, J.1
Wang, J.Y.2
Liu, C.R.3
-
100
-
-
0036640044
-
A method of modeling residual stress distribution in turning for different materials
-
M.H. El-Axir A method of modeling residual stress distribution in turning for different materials International Journal of Machine Tools and Manufacture 42 2002 1055 1063
-
(2002)
International Journal of Machine Tools and Manufacture
, vol.42
, pp. 1055-1063
-
-
El-Axir, M.H.1
-
101
-
-
0348089987
-
Simultaneous optimization of machining parameters for dimensional instability control in aero gas turbine components made of Inconel 718 alloy, Transactions of ASME
-
B.K. Subhas, R. Bhat, K. Ramachandra, and H.K. Balakrishna Simultaneous optimization of machining parameters for dimensional instability control in aero gas turbine components made of Inconel 718 alloy, Transactions of ASME Journal of Manufacturing Science and Engineering 122 2000 586 590
-
(2000)
Journal of Manufacturing Science and Engineering
, vol.122
, pp. 586-590
-
-
Subhas, B.K.1
Bhat, R.2
Ramachandra, K.3
Balakrishna, H.K.4
-
103
-
-
23844469285
-
Finite element modeling of residual stresses in machining induced by cutting using a tool with finite edge radius
-
K.C. Ee, O.W. Dillon Jr., and I.S. Jawahir Finite element modeling of residual stresses in machining induced by cutting using a tool with finite edge radius International Journal of Mechanical Sciences 47 2005 1611 1628
-
(2005)
International Journal of Mechanical Sciences
, vol.47
, pp. 1611-1628
-
-
Ee, K.C.1
Dillon Jr., O.W.2
Jawahir, I.S.3
-
104
-
-
37549024614
-
Modeling of white layer formation under thermally dominant conditions in orthogonal machining of hardened AISI 52100 steel
-
A. Ramesh, and S.N. Melkote Modeling of white layer formation under thermally dominant conditions in orthogonal machining of hardened AISI 52100 steel International Journal of Machine Tools and Manufacture 48 2008 402 414
-
(2008)
International Journal of Machine Tools and Manufacture
, vol.48
, pp. 402-414
-
-
Ramesh, A.1
Melkote, S.N.2
-
105
-
-
79551690007
-
Numerical modelling of 3-D hard turning using Arbitrary Eulerian Lagrangian finite element method
-
P.J. Arrazola, and T. zel Numerical modelling of 3-D hard turning using Arbitrary Eulerian Lagrangian finite element method International Journal of Machining and Machinability of Materials 3 3 2008 238 249
-
(2008)
International Journal of Machining and Machinability of Materials
, vol.3
, Issue.3
, pp. 238-249
-
-
Arrazola, P.J.1
Zel, T.2
-
106
-
-
67349217162
-
A novel hybrid predictive model and validation of unique hook-shaped residual stress profiles in hard turning
-
Y.B. Guo, S. Anurag, and I.S. Jawahir A novel hybrid predictive model and validation of unique hook-shaped residual stress profiles in hard turning CIRP AnnalsManufacturing Technology 58 1 2009 81 84
-
(2009)
CIRP AnnalsManufacturing Technology
, vol.58
, Issue.1
, pp. 81-84
-
-
Guo, Y.B.1
Anurag, S.2
Jawahir, I.S.3
-
107
-
-
67349132695
-
Improving surface integrity in orthogonal machining of hardened AISI 52100 steel by modeling white and dark layers formation
-
D. Umbrello, and L. Filice Improving surface integrity in orthogonal machining of hardened AISI 52100 steel by modeling white and dark layers formation CIRP AnnalsManufacturing Technology 58 2009 73 76
-
(2009)
CIRP AnnalsManufacturing Technology
, vol.58
, pp. 73-76
-
-
Umbrello, D.1
Filice, L.2
-
112
-
-
67349218852
-
Computational modelling of 3-D turning with variable edge design tooling: Influence of micro-geometry on forces, stresses, friction and tool wear
-
T. zel Computational modelling of 3-D turning with variable edge design tooling: influence of micro-geometry on forces, stresses, friction and tool wear Journal of Materials Processing Technology 209 11 2009 5167 5177
-
(2009)
Journal of Materials Processing Technology
, vol.209
, Issue.11
, pp. 5167-5177
-
-
Zel, T.1
-
113
-
-
38949162173
-
A modified time-efficient FE approach for predicting machining-induced residual stresses
-
M.N.A. Nasr, E.-G. Ng, and M.A. Elbestawi A modified time-efficient FE approach for predicting machining-induced residual stresses Finite Elements in Analysis and Design 44 4 2008 149 161
-
(2008)
Finite Elements in Analysis and Design
, vol.44
, Issue.4
, pp. 149-161
-
-
Nasr, M.N.A.1
Ng, E.-G.2
Elbestawi, M.A.3
-
114
-
-
42749088633
-
An exploration of friction models for the chip tool interface using an Arbitrary LagrangianEulerian finite element model
-
A. Haglund, H.A. Kishawy, and R.J. Rogers An exploration of friction models for the chip tool interface using an Arbitrary LagrangianEulerian finite element model Wear 265 34 2008 452 460
-
(2008)
Wear
, vol.265
, Issue.34
, pp. 452-460
-
-
Haglund, A.1
Kishawy, H.A.2
Rogers, R.J.3
-
115
-
-
70449095148
-
Finite element modeling of oblique machining using an Arbitrary LagrangianEulerian formulation
-
I. Llanos, J.A. Villar, I. Urresti, and P.J. Arrazola Finite element modeling of oblique machining using an Arbitrary LagrangianEulerian formulation Machining Science and Technology: An International Journal 13 3 2009 385 406
-
(2009)
Machining Science and Technology: An International Journal
, vol.13
, Issue.3
, pp. 385-406
-
-
Llanos, I.1
Villar, J.A.2
Urresti, I.3
Arrazola, P.J.4
-
117
-
-
37649023439
-
A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti6Al4V
-
M. Calamaz, D. Coupard, and F. Girot A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti6Al4V International Journal of Machine Tools and Manufacture 48 2008 275 288
-
(2008)
International Journal of Machine Tools and Manufacture
, vol.48
, pp. 275-288
-
-
Calamaz, M.1
Coupard, D.2
Girot, F.3
-
118
-
-
77955336673
-
Investigations on the effects of multi-layered coated inserts in machining Ti6Al4V alloy with experiments and finite element simulations
-
T. zel, M. Sima, A.K. Srivastava, and B. Kaftanoglu Investigations on the effects of multi-layered coated inserts in machining Ti6Al4V alloy with experiments and finite element simulations CIRP AnnalsManufacturing Technology 59 1 2010 77 82
-
(2010)
CIRP AnnalsManufacturing Technology
, vol.59
, Issue.1
, pp. 77-82
-
-
Zel, T.1
Sima, M.2
Srivastava, A.K.3
Kaftanoglu, B.4
-
119
-
-
33744539961
-
Simulation der Spansegmentierung beim Hochgeschwindigkeits-Zerspanned unter Bercksichtigung duktiler Schdigung
-
R. Sievert, H.D. Noack, A. Hamann, P. Loewe, K.N. Singh, G. Kuenecke, R. Clos, U. Schreppel, P. Veit, E. Uhlmann, and R. Zettier Simulation der Spansegmentierung beim Hochgeschwindigkeits-Zerspanned unter Bercksichtigung duktiler Schdigung Techniche Mechanik 23 24 2003 216 233
-
(2003)
Techniche Mechanik
, vol.23
, Issue.24
, pp. 216-233
-
-
Sievert, R.1
Noack, H.D.2
Hamann, A.3
Loewe, P.4
Singh, K.N.5
Kuenecke, G.6
Clos, R.7
Schreppel, U.8
Veit, P.9
Uhlmann, E.10
Zettier, R.11
-
120
-
-
0000495449
-
A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures
-
G.R. Johnson, and W.H. Cook A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures Proceedings of the Seventh International Symposium on Ball 1983 541 547
-
(1983)
Proceedings of the Seventh International Symposium on Ball
, pp. 541-547
-
-
Johnson, G.R.1
Cook, W.H.2
-
123
-
-
77957254698
-
Modified material constitutive models for serrated chip formation simulations and experimental validation in machining of titanium alloy Ti-6Al-4V
-
doi: 10.1016/j.ijmachtools.2010.08.004
-
M. Sima, T. zel, Modified material constitutive models for serrated chip formation simulations and experimental validation in machining of titanium alloy Ti6Al4V, International Journal of Machine Tools and Manufacture 50 (11) (2010) 943960. doi: 10.1016/j.ijmachtools.2010.08.004.
-
(2010)
International Journal of Machine Tools and Manufacture
, vol.50
, Issue.11
, pp. 943-960
-
-
Sima, M.1
Ozel, T.2
|