Machining of composite materials

CIRP Annals - Manufacturing Technology

Volumn 51, Issue 2, 2002, Pages 611-634

  Teti, R ^a  

^a UNIVERSITY OF NAPLES FEDERICO II   (Italy)

Author keywords

Composite materials; Conventional cutting processes; Machining

Indexed keywords

COMPOSITE MATERIALS; CUTTING TOOLS; DRILLING; TURNING;

CONVENTIONAL CUTTING; TOOL DESIGN;

MACHINING;

EID: 0036978262     PISSN: 00078506     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0007-8506(07)61703-X     Document Type: Article

References (78)

1. Garlasco, F.M., 1969, Machining of Boron Fibrous Composites, American Society of Manufacturing Engineering, SME, TP EM: 69-74.
2. Maclean, B.J., Misra, M.S., 1983, Mechanical Behavior of Metal Matrix Composites, Eds. Hack, J.E., Amateau, M.F., TMS-AIME 301.
3. König, W., Wulf, C., Graß, P., Willerscheid, H., 1989, Machining of Fibre-Reinforced Plastics, Annals of CIRP, 34/2: 537-548.
4. Komanduri, R., 1997, Machining of Fibre-Reinforced Composites, Int. J. of Machining Science and Technology, 1/1: 113-152.
5. Hung, N.P., Venkatesh, V.C., Loh, N.L., 2002, Machining of Metal Matrix Composites, In Machining of Ceramics and Composites, Eds. Jahanmir, S. and Ramulu, M., Marcel Dekker Inc: 289-325.
6. Klocke, F., König, W., Rummenhöller, S., Würtz, C., 1999, Milling of Advanced Composites, in Machining of Ceramics and Composites, Jahanmir, S., Ramulu, M., Koshy, P., Marcel Dekker Inc.: 249-265.
7. Caprino, G., De Iorio, I., Santo, L., Nele, L., 1996, On the Machinability of Composite Materials, Integrated Des. and Proc. Technol., IDTP 3: 259-266.
8. Caprino, G., De Iorio, I., Nele, L., 1996, Effect of Tool Wear on Cutting Forces in the Orthogonal Cutting of Unidirectional GFRP, Composites: Part A, 27A: 409-415.
9. Santo, L., Caprino, G., De Iorio, I., 1998, Cutting Forces and Cut Quality in Orthogonal Cutting of Unidirectional Carbon Fibre Reinforced Plastics, Integrated Des. and Proc. Technol., IDTP 5: 221-228.
10. Lopresto, V., Santo, L., Caprino, G., De Iorio, I., 1999, Effect of Fibre Orientation on Cutting Forces and Cut Quality in Machining Unidirectional Carbon Fibre Reinforced Plastics, 4th AITEM Congr., Brescia, 13-15 Sept.: 451-458.
11. Lopresto, V., Santo, L., Caprino, G., de Iorio, I., 2001, Mechanism of Chip Generation in Orthogonal Machining of Unidirectional Carbon Fibre Reinforced Plastics, 1st CIRP Int. Sem. on Progress in Innovative Manufacturing Engineering - PRIME 2001, 20-22 June, Sestri Levante: 81-86.
12. Caprino, G., Leone, C., Lopresto, V., 2001, A Special V-Shaped Tool for Trimming Composite Materials, ICPR-16, 29 July - 3 August, Prag: 109-114.
13. Teti, R., Buonadonna, P., 2000, Process Monitoring of Composite Materials Machining through Neural Networks, 2nd CIRP Int. Sem. on Intelligent Computation in Manufacturing Engineering - ICME 2000, Capri, 21-23 June: 377-382.
14. Teti, R., Nele, L., Buonadonna, P., 1999, Sensor Monitoring in the Machining of Composite Materials Based on Acoustic Emission, IV AITEM Conf., Brescia, 13-15 Sept.: 37-44.
15. Spur, G., Lachmund, U., 1999, Turning of Fibre-Reinforced Plastics, in Machining of Ceramics and Composites, Eds. Jahanmir, S., Ramulu, M., Koshy, P.: 209-248.
16. Spur, G., Lachmund, U., 1995, Application of Diamond Coated Carbide Tools, 1st Int. Machining & Grinding Conf., Dearborn, 12-14 Sept.
17. Lee, E.-S., 2001, Precision Machining of Glass Fibre Reinforced Plastics with Respect to Tool Characteristics, Int. J. Advanced Manufacturing Technology, 17: 791-798.
18. Hansaki, S., 1981, Verschleißverhalten von Werkzeugen bei der Zerspanung Glasfaserverstärkter Kunststoffe, ZwF, 76 (1): 8-11.
19. Wunsch, U., 1988, Drehen Faserverstarkter Kunststoffe, Diss., Technical University Berlin.
20. Wang, D.H., Wern, C.W., Ramulu, M., Rogers, E., 1995, Cutting Edge Wear of Tungsten Carbide Tool in Continuous and Interrupted Cutting of Polymer Composites, Materials & Manufacturing Processes, 10 (3): 493-508.
21. Ramulu, M., Faridinia, M., Garbini, J.L., Jorgensen, J.E., 1991, Machining of Graphite/Epoxy Composite Materials with Polycristalline Diamond (PCD) Tools, ASME J. Eng. Mat. and Technol, 133(4): 430-436.
22. Wang, D.H., Ramulu, M., Arola, D., 1995, Orthogonal Cutting Mechanisms in Graphite/Epoxy, Part I: Unidirectional Laminate, Int. J. Machine Tools & Manuf., 35 (12): 1623-1639.
23. Wang, D.H., Ramulu, M., Arola, D., 1995, Orthogonal Cutting Mechanisms in Graphite/Epoxy, Part II: Unidirectional Laminate, Int. J. Machine Tools & Manuf., 35 (12): 1639-1648.
24. Yonezawa, T., Inasaki, I., 2001, Cutting of CFRP with Ultrasonic Vibration, 1st CIRP Int. Sem. on Progress in Innovative Manufacturing Engineering - PRIME 2001, Sestri Levante, 20-22 June: 77-80.
25. Kumabe, J., 1979, Vibration Cutting (in Japanese), Jikkyou Publishing Co., Tokyo.
26. Murphy, C., Byrne, G., Gilchrist, M.D., 2002, The Performance of Coated WC Drills when Machining Carbon Fibre-Reinforced Epoxy Composite Materials, accepted for publication.
27. Uhlmann, E., Lachmund, U., Brücher, M., 1999, Wear Phenomena on Diamond Coated Carbide Tools, Proc. of "The" Coatings in Manufacturing Engineering, Thessaloniki, 14-15 Oct.: 67-76.
28. Spur, G., Lachmund, U., 1995, Drehen von Faserverbundkunststoffen mit Diamantbeschichtetem Hartmetall, IDR, 3: 152-159.
29. Klocke, F., Würtz, C., 1998, The Use of PDC Tools for Machining Fibre Reinforced Materials, Proc. of the ECCM - 8, Naples, 3-6 June: 509-515.
30. Narutaki, N., 1996, Machining of MMC's, VDI Berichte, 1276: 359-370.
31. Tagliaferri, V., Caprino, G., Diterlizzi, A., 1990, Effect of Drilling Parameters on the Finish and Mechanical Properties of GFRP Composites, Int. J. Machine Tools & Manuf., 30/1: 77-84.
32. Sheng, Y., Tomizuka, M., Ozaki, M., 2000, Dynamic Modeling and Adaptive Predictive Control (APC) of Drilling of Composite Materials, Proc. of the American Control Conference, Chicago, Illinois, 21-23 June: 2568-2572.
33. Ozaki, M., Sheng, Y., Tomizuka, M., Won, M.-S., Dharan, H., 2000, Characterization, Modeling and Control of Drilling of Composite Materials, Japan-USA Symposium of Flexible Automation, Ann Arbor, Michigan, 23-26 July: 129-134.
34. Brinksmeier, E., Janssen, R., 2002, Drilling of Multi-Layer Composite Materials Consisting of Carbon Fibre Reinforced Plastics (CFRP), Titanium and Aluminium Alloys, Annals of CIRP, 51/1: 87-90.
35. Brinksmeier, E., Walter, A., Janssen, R., Diersen, P., 1999, Aspects of Cooling Lubrication Reduction in Machining Advanced Materials, Proc. of the Institution of Mechanical Engineers, Vol. 213, Part B, Suffolk (UK): 769-778.
36. Janssen, R., 2000, Automated Repair of Jet Engine Blades, Machining Technology, SME, Dearborn, Vol. 11, No. 1.
37. Graß, P., 1988, Bohren Faserverstärkter Duromere, Diss., RWTH Aachen.
38. König, W., Rummenhoëller, S., 1991, Spanende Bearbeitung Faserverstärkter Kunststoffe, Technica 40, 10: 75-81.
39. Wiendl, J., 1987, Hochgeschwindigkeitsfräsen von Aramidfaserverstärkten Kunststoffe, Carl Hanser Verlag, München & Wien.
40. König, W., Rummenhöller, S., 1990, Langfaserverstärkte Thermoplaste Fräsen, Ind.-Anz., 112, 101: 40-41.
41. Reimann, W., 1991, Hochgeschwindigkeitsfräsen von Kohlenstoffaserverstärkten Kunststoffen, Diss., Technical University Darmstadt.
42. Würtz, C., Rummenhöller, S., Klocke, F., 1996, Tool Design for the Milling Process of Carbon Reinforced Plastic (CFRP), Engineering System Design and Analysis, ASME, 3: 29-32.
43. Rummenhöller, S., 1996, Werkstofforientierte Prozeßauslegung für das Fräsen Kohlenstofffaserverstärkter Kunststoffe, Doctoral Thesis, RWTH Aachen.
44. Hohensee, V., 1992, Umrißbearbeitung von Faserverstärkten Kunststoffen, Diss., University Hannover.
45. König, W., Grabß, P., 1986, Bohr - und Fräswerkzeuge für Faserverstärkte Kunststoffe, VDI-Z, 128, 3: 71-75.
46. Hohensee, W., 1987, Schnitt in die Faser I, II, Modern Fertigung.
47. Spur, G., Liebelt, S., 1997, Bearbeitung von Glasmattenverstärkten Thermoplasten (GMT), ZWF 92, 4, Carl Hanser Verlag.
48. Weinert, K., 2000, Machining of Light-Metal Matrix Composites, STC-C Technical Presentation, January CIRP Meeting, Paris.
49. Weinert, K., 1993, A Consideration of Tool Wear Mechanism when Machining Metal Matrix Composites (MMC), Annals of CIRP, 42/1: 95-98.
50. Biermann, D., 1995, Untersuchungen zum Drehen von Aluminiummatrix-Verbund-Werkstoffen, Fortschrittberichte VDI, Reihe 2, Nr. 338.
51. Weinert, K., Buschka, M., Niehues, J., Schoberth, A., 2001, Spanende Bearbeitung von Al-Matrix-Verbundwerkstoffen, Materialwissenschaft und Werkstofftechnik, Wiley-VCH Verlag, 32, 5.
52. Hung, H.P., Venkatesh, V. C., Loh, N. L., 1998, Cutting Tools for Metal Matrix Composites, Advanced Ceramics for Cutting Tool Applications, Trans. Tech. Publications, Switzerland, 3: 289-325.
53. Chen, P., 1992, High-Performance Machining of SiC Whisper-Reinforced Aluminium Composite by Self-Propelled Rotary Tool, Annals of CIRP, 41/1: 59-62.
54. Coelho, R.T., Yamada, S., leRoux, T., Aspinwall, D.K., Wis, M.L.H., 1993, Conventional Machining of an Aluminium based SiC Reinforced Metal Matrix Composite (MMC) Alloy, Proc. of the 30th MATADOR, Manchester: 125-133.
55. Looney, L.A., Monaghan, J.M., O'Reilly, P., Taplin, D.M.R., 1992, The Turning of an Al/SiC Metal Matrix Composite, J. Mat. Proc. Tech., 33: 453-468.
56. Tomac, N., Tonnessen, K., 1992, Machinability of Particulate Aluminium Matrix Composites, Annals of CIRP, 41/1, 55-58.
57. Töshoff, H.K., Winkler, J., 1997, The Influence of Tool Coatings in Machining of Magnesium, Surface Coating Technology, 94-95, 610-616.
58. Tönshoff, H.K., Gey, C., Winkler, J. 1998, Erzeugen von Funktionsflächen an Unverstärkten und Partikelverstärkten Magnesiumwerkstoffen durch Spanen & Walzen, Werkstoffwoche, München: 57-62.
59. Tönshoff, H.K., Karpuschewski, B., Winkler, J., Podolsky, C., 1999, Manufacturing of Magnesium by Turning and Burnishing Operations, Advanced Technology of Plasticity, Vol. 1, Ecological Manufacturing, Proc. 6th ICTP, 19-24 Sept.: 607-612.
60. Songmene, V., Balazinski, M., 2001, Machining of a Graphitic Sic-Reinforced Aluminium Metal Matrix Composites with Diamond Tools, 1st CIRP Int. Sem. on Progress in Innovative Manufacturing Engineering - PRIME 2001, Sestri Levante, 20-22 June: 73-76.
61. Coelho, R.T., Aspinwall, D.K., Wise, M.L.H., 1994, Drilling and Reaming Aluminium-Based Metal Matrix Composites (MMC) using PCD Tooling, Trans. of NAMRI/SME, XXII, 149-156.
62. Coelho, R.T., Yamada, S., Aspinwall, D.K., Wise, M.L.H., 1995, The Application of Polycrystalline Diamond (PCD) Tool Materials when Drilling and Reaming Aluminium Based Alloys including MMC, Int. J. Machine Tools & Manuf., 35/5: 761-774.
63. Lane, C., 1990, Machining Characteristics of Particulate-Reinforced Aluminium, in Fabrication of Particulates Reinforced Metal Composites, ASM, Ohio: 195-201.
64. Cronjager, L.; Meister, D., 1991, Drilling of Fibre and Particle Reinforced Aluminium, Composite Material Technology, ASME, 37: 185-189.
65. Cronjager, L., Meister, D., 1992, Machining of Fibre and Particle-Reinforced Aluminium, Annals of CIRP, 41/1: 63-66.
66. Jawaid, A., Barnes, S., Ghadimzadeh, S.R., 1992, Drilling of Particulate Aluminium Silicon Carbide Metal Matrix Composites, Proc. of the ASM Material Workshop, Chicago, Illinois: 35-47.
67. Ricci, W.C., 1987, Machining Metal Matrix Composites, SME, MR87-827.
68. Venkatesh, V.C., Norizah, R., Murugan, V.S., Mehrota, P.K., Ourdjini, A., Hamidon, M., 2001, Microdrilling of Composites, Int. Conf. on Materials for Advanced Technology, Symposium on Advances on Polymers and Composites, Sun Tech City, Singapore, 2-6 July.
69. Songmene, V., Balazinski, M., 1999, Machinability of Graphitic Metal Matrix Composites as a Function of Reinforced Particles, Annals of CIRP, 48/1: 77-80.
70. TM, ASME Int. Mech. Eng. Congr. and Expo., Dallas, Texas, 19-21 Nov.: 193-200.
71. Bell, J.A.E., Stephenson, T.F., Waner, A.E.M., Songmene, V., 1997, Physical Properties of Graphitic Silicon Carbide Aluminium Metal Matrix Composite, SAE paper No. 970788.
72. Rohatgi, P.K., Narendranath, C.S., 1993, Tribological Properties of Al-Si-Gr-SiC Hybrid Composite, Proc. of the ASM Materials Congr., Pittsburgh, Pennsylvania, 17-21 Oct.: 21-25.
73. Ames, W., Alpas, A.T., 1993, Sliding Wear of an Al-Si Alloy Reinforced with Silicon Carbide Particles and Graphite Flakes, Proc. of the ASM Materials Congr., Pittsburgh, Pennsylvania, 17-21 Oct.: 27-35.
74. Weinert, K., Liedschulte, M. Schroer, M., 1997, Machining of Magnesium Alloys and Magnesium Matrix Composites, Magnesium 97, Israel, 10-12, Nov.
75. Lane, C.T., 1992, The effect of Different Reinforcement on PCD Tool Life for Aluminium Composites, Machining of Composites Materials, Proc. of the ASM/TMS Materials Week Symposium, Chicago, Illinois, 1-5 Nov.: 17-27.
76. Vaccari, J.A., Lane, C.T., 1993, Machining a new breed of aluminium, American Machinist, Nov., 56.
77. Chandrasekaran, H., Johansson, J-O, 1996, On the Behaviour of Fibre/Particle Reinforced Aluminium Alloy Matrix Composites in Milling and Grinding, 2nd Int. Conf. on Machining of Advanced Materials (MAM), Aachen.
78. Pollmann, W., Becker, W., 2001, Laser-Assisted Manufacturing Pacemaking Technology in the 3rd Millennium, Proc. of the LANE 2001, Bamberg, Meisenbach: 39-54.