Surface integrity - Definition and importance in functional performance

Surface Integrity in Machining

Volumn , Issue , 2010, Pages 1-35

  Astakhov, Viktor P ^a  

^a Michigan State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 79952648625     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-1-84882-874-2_1     Document Type: Chapter

References (69)

1. Hudson, B. (1992) Surface Science - An Introduction, Boston: Butterworth-Heinemann.
2. Riviere, J.C. (1990) Surface Analytical Techniques, Oxford: Oxford Science Publications.
3. Walls, J.M., ed. Methods of Surface Analysis: Techniques and Applications. 1992, Cambridge University Press: New York.
4. Asthana, P., Micro-and Nano-Scale Experimental Approach to Surface Engineering Metals, in Mechanical Engineering, in Mechanical Engineering. 2006, Texas A&M University: College Station, TX. p. 131.
5. Williams, J.A., Tabor, D. (1977) The role of lubricants in machining. Wear 43: 275-292.
6. Gibbs, J.W. (1928) The Collected Works of J. Willard Gibbs, New York: Longmans, Green and Co.
7. Zangwill, A. (1988) Physics at Surfaces, Cambridge: Cambridge University Press.
8. Langmuir, I. (1960) The collected works of Irving Langmuir;: With contributions in memoriam, including a complete bibliography of his works. TWELVE VOLUME SET, New York: Pergamon Press.
9. Hudson, J.B. (1998) Surface Science: An Introduction, New York: John Wiley & Sons
10. Reidenbach, F., ed. ASM Handbook: Volume 5: Surface Engineering 10th edn. 1994, ASM International: Materials Park, OH.
11. Cotell, C.M., Sprague, J.A., Preface, Surface Engineering, in ASM Handbook. 1994, ASM International: Materials Park, OH.
12. King, R.I., Chapter 1: Historical Background, in Handbook of High-Speed Machining Technology, R.I. King, ed. 1985, New York: Chapman and Hall.
13. Graessley, W.W. (2003) Polymeric Liquids and Networks: Structure and Properties, New York: Taylor & Francis.
14. Finch, G.I., Quarrell, A. G., Roebuck, J. S. (1934) The Beilby Layer. Proceedings of the Royal Society of London. Series A 145(855): 676-681.
15. Jirásková, Y., Svobodaa, J., Schneeweissa, O., Davesb, W., Fischer, F.D. (2005) Microscopic investigation of surface layers on rails Applied Surface Science 239(2): 132-141.
16. Hirose, T., Tanigawa, H., Ando, M., Kohyama, A., Katoh, Y., Narui, M. (2002) Radiation effects on low cycle fatigue properties of reduced activation ferritic/martensitic steels Journal of Nuclear Materials 307-311: 304-307.
17. (2003) Characterization and Failure Analysis of Plastics, Materials Park, OH: ASM International. http://asmcommunity.asminternational.org/portal/site/ www/AsmStore/ ProductDetails/-vgnextoid=66b975dfae0f8110VgnVCM100000701e010aRCRD
18. Sotnikov, A.A., Stepanov, V.N., Livshits, A.M., Bukchin, S.M. (1994) Improvement of turbine blade systems to reduce cavitation erosion Power Technology and Engineering 28(12): 746-750.
19. Masakazu, O., Hiroshi, M., Kazuyuki, M., Tomoyoshi, O., Masayuki, U. (2005) Surface corrosion of various kinds of metals by atmospheric pollution. Bulletin of Hiroshima Kokusai Gakuin University 38: 69-83.
20. M'Saoubi, R., Outeiro, J.C., Chandrasekaran, H., Dillon Jr., O.W. and Jawahir, I.S. (2008) A review of surface integrity in machining and its impact on functional performance and life of machined products. Int. J. Sustainable Manufacturing 1(1/2): 203-236.
21. Field, M., Kahles, J.F. (1964) The surface integrity of machined and ground high strength steels. DMIC Report 210: 54-77.
22. Field, M., Kahles, J.F. (1971) Review of surface integrity of machined components. Annals of the CIRP 20(2): 153-162.
23. Field, M., Kahles, J.F., Cammett, J.T. (1972) Review of measuring methods for surface integrity. Annals of the CIRP 21: 219-238.
24. Kalpakjian, S. and S.R. Schmid (2001) Manufacturing Engineering and Technology. 4th edition ed, New Jersey: Prentice-Hall.
25. Chou, Y.K., Evans, C.J. (1999) White layers and thermal modelling of hard turned surfaces. International Journal of Machine Tools and Manufacture 39: 1863-1881.
26. Griffiths, B.J. (1993) Modeling complex force system, Part 1: The cutting and pad forces in deep drilling. ASME Transactions, Journal of Engineering for Industry 115: 169-176.
27. Bosheh, S.S., Mativenga, P.T. (2006) White layer formation in previous termhard turning of H13 tool steel at high cutting speeds using CBN tooling. International Journal of Machine Tools and Manufacture 46(2): 225-233
28. Stead, J.W. (1912) Micro-metallography and its practical applications. Journal of Western Scottish Iron and Steel Institute 19: 169-204.
29. Nakayama, K., Shaw, M.C., Brewer, R.C. (1966) Relationship between cutting forces, temperatures, built-up edge and surface finish Annals of CIRP 24: 211-223.
30. Masounave, J., Youssef, Y.A., Beauchamp, Y., Thomas, M. (1997) An experimental design for surface roughness and built-up edge formation in lathe dry turning. International Journal of Quality Science 2(3): 167-180.
31. Stenphenson, D.A., Agapiou, J.S. (1996) Metal Cutting Theory and Practice, New York: Marcel Dekker.
32. Oberg, E., Jones, F.D., Horton, H.L., Ryffel, H.H. (2004) Machinery's Handbook. 27th edn, New York: Industrial Press.
33. Astakhov, V.P. (1998/1999) Metal Cutting Mechanics, Boca Raton, USA: CRC Press.
34. Atkins, A.G., Mai, Y.W. (1985) Elastic and Plastic Fracture: Metals, Polymers. Ceramics, Composites, Biological Materials, New York: John Wiley & Sons.
35. Astakhov, V.P. (2006) Tribology of Metal Cutting. Tribology and Interface Engineering Series, No. 52, ed. B.J. Briscoe, London: Elsevier.
36. Komarovsky, A.A., Astakhov, V.P. (2002) Physics of Strength and Fracture Control: Fundamentals of the Adaptation of Engineering Materials and Structures, Boca Raton: CRC Press.
37. Zorev, N.N. (1966) Metal Cutting Mechanics. 1966, Pergamon Press: Oxford.
38. Javidi, A., ieger, U., Eichlseder, W. (2008) The effect of machining on the surface integrity and fatigue life. International Journal of Fatigue 30(10-11): 2050-2055.
39. Seemikeri, C.Y., Brahmankar, P.K., Mahagaonkar, S.B. (2008) Investigations on surface integrity of AISI 1045 using LPB tool. Tribology International 41(8): 724-734.
40. Liu, J., Yue, Z.F., Liu, Y.S. (2007) Surface finish of open holes on fatigue life. Theoretical and Applied Fracture Mechanics 47(1): 35-45.
41. Choi, Y., Liu, C.R. (2006) Rolling contact fatigue life of finish hard machined surfaces: Part 1. Model development. Wear 261(5-6): 485-491.
42. Matsumoto, Y., F. Hashimoto, and G. Lahoti (1999) Surface Integrity Generated by Precision Hard Turning. Annals of the CIRP 48/1: 59-62.
43. Lennon, A.B., McCormack, B.A.O., Prendergast, P. J. (2003) The relationship between cement fatigue damage and implant surface finish in proximal femoral prostheses. Medical Engineering & Physics 25(10): 833-841.
44. Paulin, C., Ville, F., Sainsot, P., Coulon, S., Lubrecht, T. (2003) Effect of rough surfaces on rolling contact fatigue theoretical and experimental analysis. Tribology and Interface Engineering Series 43: 611-617.
45. Hutson, A.L., Niinomi, M., Nicholas, T., Eylon, D. (2002) Effect of various surface conditions on fretting fatigue behavior of Ti-6Al-4 V. International Journal of Fatigue 24(12): 1223-1234.
46. Chen, H.Y., Hickel, R., Setcos, J.C., Kunzelmann, K-H. (1999) Effects of surface finish and fatigue testing on the fracture strength of CAD-CAM and pressed-ceramic crowns. The Journal of Prosthetic Dentistry 82(4): 468-475.
47. Bayoumi, M.R., Abdellatif, A.K. (1995) Effect of surface finish on fatigue strength. Engineering Fracture Mechanics 51(5): 861-870.
48. Asquith, D.T., Yerokhin, A.L., Yates, J.R., Matthews, A. (2007) The effect of combined shot-peening and PEO treatment on the corrosion performance of 2024 Al alloy. Thin Solid Films 516(2-4): 417-421.
49. Aballe, A., Bethencourt, M., Botana, F.J., Marcos, M., Sánchez-Amaya, J.M. (2004) Influence of the degree of polishing of alloy AA 5083 on its behaviour against localised alkaline corrosion. Corrosion Science 46(8): 1909-1920.
50. Reddy, B.S.K., Ramamoorthy, B., Nair, P.K. (2005) Surface integrity aspects and their influence on corrosion behaviour of ground surfaces. IE(I)-Journal-PR 86: 35-38.
51. Poli, C. (2001) Design for Manufacturing: A Structured Approach, Woburn, MA: Butterworth- Heinemann.
52. Laroux, K. (1988) Troubleshooting Manufacturing Processes: Adapted from the Tool and Manufacturing Engineers Handbook: a Reference Book for Manufacturing Engineers, Managers, and Technicians, Dearborn, MI: SME.
53. Batchelor, A.W., Lam, L.N., Chandrasekaran, M. (1999) Materials Degradation and its Control by Surface Engineering, London, UK: Imperial College Press.
54. Astakhov, V.P., Davim, P.J., Tools (geometry and material) and tool wear, in Machining: Fundamentals and Recent Advances, P.J.Davim, Editor. 2008, Springer: London. p. 29-58.
55. Nehoroshkov, S.V. (2006) Model of heat flows in cutting with inserts having heatsink (in Russian). Research in Russia 5(2): 1254-1256.
56. Kim, H.J., Matsumaru, K., Takata, A, Ishizaki, K. (2003) Grinding behavior of silicon wafer and sintered Al2O3 by constant-force-feeding grinding systems. Advances in Technology of Materials and Materials Processing Journal (ATM) 5(2): 50-53.
57. Kim, H.J., Matsumaru, K., Takata, A, Ishizaki, K. (2004) Reduction of ceramic machining defects by regulated force feeding grinding system. Advances in Technology of Materials and Materials Processing Journal (ATM) 6(2): 290-297.
58. Castellani, R., de Ruijter, J.E., Renggli, H., Jansen, J.A. (1999) Response of rat bone marrow cells to differently roughened titanium discs. Clin Oral Impl Res 10: 369-378.
59. Anselme, K., Linez, P., Bigerelle, M., Le Manger, D., Hardouin, P., Hildebrand, H.F., Lost, A., Leroy, J.M. (2000) The relative influence of the topography and chemistry of TiAl6V4 surfaces on osteoblastic cell behaviour. Biomaterials (21): 1567-1577.
60. Bowers, K., Keller, J.C., Randolph, B., Wick, D., Michaels, C. (1992) Optimization of surface micromorphology for enhanced osteoblast responses in vitro. Int J Oral Maxillofac Impl 7: 302-310.
61. Martin, J.Y., Schwartz, Z., Hummert, T.W., Schraub, D.M., Simpson, J., Lankford Jr, J., Dean, D.D., Cochran, D.L., Boyan, B.D. (1995) Effect of titanium surface roughness on proliferation, differentiation, and protein synthesis of human osteoblast-like cells (MG63). J Biomed Mater Res 29: 389-401.
62. Wennerberg, A., Albrektsson, T., Johansson, C., Andersson, B. (1996) Experimental study of turned and grit-blasted screw-shaped implants with special emphasis on effects of blasting material and surface topography. Biomaterials 17: 15-22.
63. Groessner-Schreiber, B., Tuan, R.S. (1992) Enhanced extracellular matrix production and mineralization by osteoblasts cultured on titanium surfaces in vitro. J Cell Sci 101: 209-217.
64. Deligianni, D.D., Katsala, N.D., Koutsoukos, P.G., Missirllis, Y.F. (2001) Effect of surface roughness of hydoxyapatite on human bone marrow cell adhesion, proliferation, differentiation and detachment strength. Biomaterials 22: 87-96.
65. Cooper, L.F., Masuda, T., Ylilheikkila, P.K., Felton, D.A. (1998) Generalizations regarding the process and phenomenon of osseointegration. Part II. In vitro studies. Int J Oral Maxillofac Implants 13: 163-174.
66. Wilke, A., Orth, J., Lomb, M., Fuhrmann, R., Kienapfel, H., Griss, P., Franke, R.P. (1998) Biocompatibility analysis of different biomaterials in human bone marrow cell cultures. J Biomed Mater Res 40: 301-306.
67. Rosa, A.L., Beloti, M.M. (2003) Effect of cpTi surface roughness on human bone marrow cell attachment, proliferation, and differentiation. Braz. Dent. J. 14(1): 16-21.
68. Astakhov, V.P. (1998) Metal Cutting Mechanics, Boca Raton: CRC Press.
69. Oberg, E., Jones, F.D., Horton, H.L., Ryffel, H.H. (2008) Machinery's Handbook 28th edn. Toolbox, New York: Industrial Press.