Modeling of white layer formation under thermally dominant conditions in orthogonal machining of hardened AISI 52100 steel

International Journal of Machine Tools and Manufacture

Volumn 48, Issue 3-4, 2008, Pages 402-414

  Ramesh, Anand ^a   Melkote, Shreyes N ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Finite element modeling; Hard machining; Orthogonal cutting; Phase transformation; White layer formation

Indexed keywords

FINITE ELEMENT METHOD; FLAME HARDENING; MACHINING; PHASE TRANSITIONS; PLASTICITY; RESIDUAL STRESSES;

FINITE ELEMENT MODELING; HARD MACHINING; ORTHOGONAL CUTTING; WHITE LAYER FORMATION;

STEEL;

EID: 37549024614     PISSN: 08906955     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijmachtools.2007.09.007     Document Type: Article

References (49)

1. Akcan S., Shah S., Moylan S.P., Chhabra P.N., Chandrasekhar S., and Yang H.T.Y. Formation of white layers in steels by machining and their characteristics. Metallurgical and Material Transactions A 33A (2002) 1245-1254
2. Barbacki A., and Kawalec M. Structural alterations in the surface layer during hard machining. Journal of Materials Processing Technology 64 (1997) 33-39
3. Barbacki A., Kawalec M., and Hamrol A. Turning and grinding as a source of microstructural changes in the surface layer of hardened steel. Journal of Materials Processing Technology 133 (2003) 21-25
4. Field M., and Kahles J.F. Review of surface integrity of machined components. Annals of the CIRP 20 2 (1971) 153-163
5. Turley D.M. The nature of the white-etching layers produced during reaming ultra-high strength steel. Materials Science and Engineering 19 (1975) 79-86
6. Eda H., Kishi K., and Hashimoto S. The formation mechanism of ground white layers. Bulletin of the JSME 24 190 (1981) 743-747
7. Griffiths B.J. Mechanisms of white layer generation with reference to machining and deformation processes. Transactions of the ASME: Journal of Tribology 109 (1987) 525-530
8. Tonshoff H.K., Wobker H.G., and Brandt D. Hard turning-influences on the workpiece properties. Transactions of NAMRI/SME XXIII (1995) 215-220
9. Abrao A.M., and Aspinwall D.K. The surface integrity of turned and ground bearing steel. Wear 196 (1996) 215-220
10. E. Brinksmeier, T. Brockhoff, White layers in machining steels, in: Proceedings of the Second International German and French Conference on High Speed Machining, 1999, pp. 7-13.
11. Vyas A., and Shaw M.C. The significance of the white layer in a hard turned steel chip. Machining Science and Technology 4 1 (2000) 169-175
12. Thiele J.D., Melkote S.N., Watkins T.R., and Peascoe R.A. Effect of cutting edge geometry and workpiece hardness on surface residual stresses in finish hard turning of AISI 52100 steel. Transactions of the ASME, Journal of Manufacturing Science and Engineering 122 4 (2000) 642-649
13. Barry J., and Byrne J. TEM study on the surface white layer in two turned hardened steels. Materials Science and Engineering A 325 (2002) 356-364
14. Sauvage X., Le Breton J.M., Guillet A., Meyer A., and Teillet J. Phase transformations in surface layers of machined steels investigated by X-ray diffraction and Mössbauer spectrometry. Materials Science and Engineering A 362 (2003) 181-186
15. Mahajan V., and Chou Y.K. Machining-induced surface hardening due to large wear land. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 218 (2004) 1647-1655
16. Guo Y., and Sahni J. A comparative study of hard turned and cylindrically ground white layers. International Journal of Machine Tools and Manufacture 44 (2004) 135-145
17. Ramesh A., Melkote S.N., Allard L.F., Riester L., and Watkins T.R. Analysis of white layers formed in hard turning of AISI 52100 steel. Materials Science and Engineering A 390 (2004) 88-97
18. Huang Y., and Liang S.Y. Modeling of cutting forces under hard turning conditions considering tool wear effect. Transactions of the ASME, Journal of Manufacturing Science and Engineering 127 2 (2005) 262-270
19. Guo Y.B., and Liu C.R. 3D FEA modeling of hard turning. Transactions of the ASME, Journal of Manufacturing Science and Engineering 124 2 (2002) 189-199
20. Marusich T.D., McDaniel R.J., Usui S., Fleischmann J.A., Kurfess T.R., and Liang S.Y. Three-dimensional finite element modeling of hard turning processes. Proceedings of the ASME Manufacturing Engineering Division-MED 14 (2003) 221-227
21. Huang Y., and Dawson T.G. Tool crater wear depth modeling in cBN hard turning. Wear 258 9 (2005) 1455-1461
22. Mahdi M., and Zhang L. Correlation between grinding conditions and phase transformation of an alloy steel. In: Wrobel L.C., et al. (Ed). Advanced Computational Methods in Heat Transfer III (1994), Computational Mechanics Publications, Southampton 193-200
23. Mahdi M., and Zhang L. Applied mechanics in grinding-VI. Residual stresses and surface hardening by coupled thermo-plasticity and phase transformation. International Journal of Machine Tools and Manufacture 38 (1998) 1289-1304
24. Mahdi M., and Zhang L. Applied mechanics in grinding. Part 7: residual stresses induced by the full coupling of mechanical deformation, thermal deformation and phase transformation. International Journal of Machine Tools and Manufacture 39 (1999) 1285-1298
25. N.S. Akcan, Microstructure analysis and temperature modeling in finish machining of hardened steels, M.S. Thesis, School of Industrial Engineering, Purdue University, 1998.
26. Chou Y.K., and Evans C.J. White layers and thermal modeling of hard turned surfaces. International Journal of Machine Tools and Manufacture 39 (1999) 1863-1881
27. Porter D.A., and Easterling K.E. Phase Transformations in Metals and Alloys (1981), Van Nostrand Reinhold, New York
28. Krauss G. Steels: Heat Treatment and Processing Principles (1990), ASM International, Metals Park, OH
29. Wang K.F., Chandrashekhar S., and Yang H.T.Y. Experimental and computational study of the quenching of carbon steel. Transactions of the ASME, Journal of Manufacturing Science and Engineering 119 (1997) 257-265
30. Rammerstofer F.G., Fischer D.F., Mitter W., Bathe K.J., and Snyder M.D. On thermo-elastic-plastic analysis of heat treatment processes including creep and phase changes. Computers and Structures 13 (1981) 771-779
31. Denis S., Gautier E., Simon A., and Beck G. Stress-phase transformation interactions-basic principles, modelling, and calculation of internal stresses. Materials Science and Technology 1 (1985) 805-814
32. Denis S., Sjostrom S., and Simon A. Coupled temperature, stress, phase transformation calculation model numerical illustration of the internal stresses evolution during cooling of a eutectoid carbon steel cylinder. Metallurgical Transactions A 18A (1987) 1203-1212
33. Denis S., Gautier E., Sjostrom S., and Simon A. Influence of stresses on the kinetics of pearlitic transformation during continuous cooling. Acta Metallurgica 35 7 (1987) 1621-1632
34. Wang K.F., Chandrashekhar S., and Yang H.T.Y. An efficient 2-D finite element procedure for the quenching analysis with phase change. Transactions of the ASME, Journal of Engineering for Industry 115 (1993) 124-138
35. Jena A.K., and Chaturvedi M.C. Phase Transformations in Materials (1992), Prentice-Hall, Englewood Cliffs, NJ
36. Nishiyama Z. Martensitic Transformations (1978), Academic Press, New York
37. G.R. Johnson, W.H. Cook, in: Proceedings of the Seventh International Symposium on Ballistics, American Defence Preparedness Association (ADPA), Netherlands, 1983.
38. Shatla M., Kerk C., and Altan T. Process modeling in machining, part I: determination of flow stress data. International Journal of Machine Tools and Manufacture 41 (2001) 1511-1534
39. Baker M., Siemers C., and Rosler J. A finite element model of high speed metal cutting with adiabatic shearing. Computers and Structures 80 5-6 (2002) 495-513
40. Guo Y.B., and Dornfeld D.A. Finite element modeling of burr formation process in drilling 304 stainless steel. Journal of Manufacturing Science and Engineering 122 (2000) 612-619
41. A. Ramesh, Prediction of process-induced residual stresses and microstructural changes in orthogonal hard machining, Ph.D. Thesis, Mechanical Engineering, Georgia Institute of Technology, 2002.
42. R.L. Martineau, A viscoplastic model of expanding cylindrical shells subjected to internal explosive detonations, Ph.D. Thesis, Department of Mechanical Engineering, Colorado State University, Fort Collins, CO, 1998.
43. Darken L.S., and Gurry R.W. Physical Chemistry of Metals (1953), CBS Press, New Delhi
44. Beswick J. Effect of prior cold work on the martensite transformation in SAE 52100. Metallurgical Transactions 15A (1984) 299-306
45. Koistinen D.P., and Marburger R.E. A general equation prescribing the extent of the austenite-martensite transformation in pure iron carbon alloys and carbon steels. Acta Metallurgica 7 (1959) 59
46. Y.B. Guo, 3-D modeling of superfinish hard turning, Ph.D. Thesis, Department of Industrial Engineering, Purdue University, 2001.
47. T.G. Dawson, Effects of cutting parameters and tool wear in hard turning, Ph.D. Thesis, School of Mechanical Engineering, Georgia Institute of Technology, 2002.
48. Schreiber E., and Schlicht H. Residual stresses after turning of hardened components. In: Beck G., Denis S., and Simon A. (Eds). Proceedings of the Second International Conference on Residual Stresses (ICRS 2) (1988), Elsevier, New York 853-860
49. Ramesh A., Thiele J.D., and Melkote S.N. Residual stresses and subsurface flow in finish hard turned AISI 4340 and 52100 steels: a comparative study. Proceedings of the ASME IMECE, MED 10 (1999) 831-837