-
1
-
-
0016879530
-
In Process Tool Wear Sensor for Cutting Operations
-
D.F. Micheletti, W. König, and H.R. Victor In Process Tool Wear Sensor for Cutting Operations CIRP Annals 25 2 1976 483 496
-
(1976)
CIRP Annals
, vol.25
, Issue.2
, pp. 483-496
-
-
Micheletti, D.F.1
König, W.2
Victor, H.R.3
-
2
-
-
0020882925
-
A Critical Review of Sensors for Unmanned Machining
-
J. Tlusty, and G.C. Andrews A Critical Review of Sensors for Unmanned Machining CIRP Annals 32 2 1983 563
-
(1983)
CIRP Annals
, vol.32
, Issue.2
, pp. 563
-
-
Tlusty, J.1
Andrews, G.C.2
-
3
-
-
58149365999
-
Development and Trends in Monitoring and Control of Machining Process
-
H.K. Tönshoff, J.P. Wulfsberg, H.J.J. Kals, W. König, and C.A. van Luttervelt Development and Trends in Monitoring and Control of Machining Process CIRP Annals 37 2 1988 611 622
-
(1988)
CIRP Annals
, vol.37
, Issue.2
, pp. 611-622
-
-
Tönshoff, H.K.1
Wulfsberg, J.P.2
Kals, H.J.J.3
König, W.4
Van Luttervelt, C.A.5
-
4
-
-
0029489274
-
Tool Condition Monitoring-The Status of Research and Industrial Application
-
G. Byrne, D. Dornfeld, I. Inasaki, W. König, and R. Teti Tool Condition Monitoring-The Status of Research and Industrial Application CIRP Annals 44 2 1995 541 567
-
(1995)
CIRP Annals
, vol.44
, Issue.2
, pp. 541-567
-
-
Byrne, G.1
Dornfeld, D.2
Inasaki, I.3
König, W.4
Teti, R.5
-
5
-
-
0001648906
-
A Review of Tool Condition Monitoring Literature Database
-
R. Teti A Review of Tool Condition Monitoring Literature Database CIRP Annals 44 2 1995 659 666
-
(1995)
CIRP Annals
, vol.44
, Issue.2
, pp. 659-666
-
-
Teti, R.1
-
6
-
-
0002065754
-
Seeing as Thinking-An Active Theory of Perception
-
Gregory RL Seeing as Thinking-An Active Theory of Perception Times Literary Supplement 1972 707 708
-
(1972)
Times Literary Supplement
, pp. 707-708
-
-
Gregory, R.L.1
-
8
-
-
77955549696
-
From Active Perception to Active Cooperation: Fundamental Processes of Intelligent Behaviour
-
in Zangenmeister WH, et al. (Eds.)
-
Baicsy R (1995) From Active Perception to Active Cooperation: Fundamental Processes of Intelligent Behaviour, in Zangenmeister WH, et al. (Eds.) Visual Attention and Cognition: 309-321.
-
(1995)
Visual Attention and Cognition
, pp. 309-321
-
-
Baicsy, R.1
-
9
-
-
57649237781
-
Architecture for Machining Process and Production Based in Open CNC
-
J.F. Oliveira, F. Ferraz Junior, R.T. Coelho, and E.J. Silva Architecture for Machining Process and Production Based in Open CNC Proceedings of IMechE Journal of Engineering Manufacture 222 12 2008 1605 1612
-
(2008)
Proceedings of IMechE Journal of Engineering Manufacture
, vol.222
, Issue.12
, pp. 1605-1612
-
-
Oliveira, J.F.1
Ferraz Junior, F.2
Coelho, R.T.3
Silva, E.J.4
-
10
-
-
77955559224
-
Systems and Strategies for Control-system-integrated Process and Machine Condition Monitoring
-
Aachen, October
-
D. Lange Systems and Strategies for Control-system-integrated Process and Machine Condition Monitoring CIRP International Conference on High Performance Cutting Aachen, October 2004
-
(2004)
CIRP International Conference on High Performance Cutting
-
-
Lange, D.1
-
13
-
-
21944435295
-
Open System Architecture for Drives
-
G. Pritschow, and C. Kramer Open System Architecture for Drives CIRP Annals 54 01 2005 375 378
-
(2005)
CIRP Annals
, vol.54
, Issue.1
, pp. 375-378
-
-
Pritschow, G.1
Kramer, C.2
-
14
-
-
3142632079
-
Assessment of the Effectiveness of a Spindle Power Signal for Tool Condition Monitoring in Machining Processes
-
D. Axinte, and N. Gindy Assessment of the Effectiveness of a Spindle Power Signal for Tool Condition Monitoring in Machining Processes International Journal of Production Research 42 2004 2679 2691
-
(2004)
International Journal of Production Research
, vol.42
, pp. 2679-2691
-
-
Axinte, D.1
Gindy, N.2
-
16
-
-
30744442238
-
Influences on Monitoring Systems which Affect their Reliability
-
Leuven
-
G. Ketteler Influences on Monitoring Systems which Affect their Reliability 2nd Int. Workshop on Intell. Manuf. Syst Leuven 1999 769 777
-
(1999)
2nd Int. Workshop on Intell. Manuf. Syst
, pp. 769-777
-
-
Ketteler, G.1
-
17
-
-
0026954942
-
Prediction of Cutting Forces and Tool Breakage in Milling from Feed Drive Current Measurement
-
Y. Altintas Prediction of Cutting Forces and Tool Breakage in Milling from Feed Drive Current Measurement J. Eng. Ind. 114 1992 386 392
-
(1992)
J. Eng. Ind.
, vol.114
, pp. 386-392
-
-
Altintas, Y.1
-
19
-
-
0027086404
-
Investigating the Temperature Dependance of Motor Current Measurements Applied to Monitoring and Adaptive Control
-
M.A. Mannan, and S. Broms Investigating the Temperature Dependance of Motor Current Measurements Applied to Monitoring and Adaptive Control CIRP Annals 41 1 1992 451 454
-
(1992)
CIRP Annals
, vol.41
, Issue.1
, pp. 451-454
-
-
Mannan, M.A.1
Broms, S.2
-
20
-
-
0242589425
-
Reconstruction of Process Forces within Digital Servodrive Systems, Production Engineering
-
G. Pritschow, J. Bretschneider, and S. Fritz Reconstruction of Process Forces within Digital Servodrive Systems, Production Engineering Annals of the German Academic Society for Production Engineers 6 1 1999 73 78
-
(1999)
Annals of the German Academic Society for Production Engineers
, vol.6
, Issue.1
, pp. 73-78
-
-
Pritschow, G.1
Bretschneider, J.2
Fritz, S.3
-
22
-
-
0036840707
-
Estimating Cutting Force from Rotating and Stationary Feed Motor Currents on a Milling Machine
-
Y.-H. Jeong, and D.-W. Cho Estimating Cutting Force from Rotating and Stationary Feed Motor Currents on a Milling Machine International Journal of Machine Tools and Manufacture 42 2002 1559 1566
-
(2002)
International Journal of Machine Tools and Manufacture
, vol.42
, pp. 1559-1566
-
-
Jeong, Y.-H.1
Cho, D.-W.2
-
23
-
-
0030216677
-
Adaptive Cutting Force Control for a Machining Centre by Using Indirect Cutting Force Measurement
-
T.-Y. Kim, and J. Kim Adaptive Cutting Force Control for a Machining Centre by Using Indirect Cutting Force Measurement International Journal of Machine Tools and Manufacture 36 1996 925 937
-
(1996)
International Journal of Machine Tools and Manufacture
, vol.36
, pp. 925-937
-
-
Kim, T.-Y.1
Kim, J.2
-
24
-
-
0029221197
-
Real-time Tool Breakage Detection for NC Milling Process
-
J.M. Lee, D.K. Choi, J. Kim, and C.N. Chu Real-time Tool Breakage Detection for NC Milling Process CIRP Annals 44 1 1995 59 62
-
(1995)
CIRP Annals
, vol.44
, Issue.1
, pp. 59-62
-
-
Lee, J.M.1
Choi, D.K.2
Kim, J.3
Chu, C.N.4
-
26
-
-
73349097553
-
An Integrated Force Sensor Solution for Process Monitoring of Drilling Operations
-
G. Byrne, and G. O'Donnell An Integrated Force Sensor Solution for Process Monitoring of Drilling Operations CIRP Annals 56 01 2007 89 92
-
(2007)
CIRP Annals
, vol.56
, Issue.1
, pp. 89-92
-
-
Byrne, G.1
O'Donnell, G.2
-
28
-
-
0036568641
-
Evaluation of a Spindle-based Force Sensor for Monitoring and Fault Diagnosis of Machining Operations
-
M. Jun, B. Ozdoganlar, R. DeVor, S. Kapoor, K. Kirchheim, and G. Schaffner Evaluation of a Spindle-based Force Sensor for Monitoring and Fault Diagnosis of Machining Operations International Journal of Machine Tools and Manufacture 42 2002 741 751
-
(2002)
International Journal of Machine Tools and Manufacture
, vol.42
, pp. 741-751
-
-
Jun, M.1
Ozdoganlar, B.2
Devor, R.3
Kapoor, S.4
Kirchheim, K.5
Schaffner, G.6
-
29
-
-
73349136508
-
Use of a Sensor Integrated Motor Spindle for Monitoring of a Flexible Machining Centre
-
Capri, Italy
-
G.E. O'Donnell, K. Kelly, and G. Byrne Use of a Sensor Integrated Motor Spindle for Monitoring of a Flexible Machining Centre 2nd CIRP Int. Sem. on ICME Capri, Italy 2000 383 388
-
(2000)
2nd CIRP Int. Sem. on ICME
, pp. 383-388
-
-
O'Donnell, G.E.1
Kelly, K.2
Byrne, G.3
-
30
-
-
0031276781
-
Development of a Combined Type Tool Dynamometer with a Piezo-film Accelerometer for an Ultra-Precision Lathe
-
J.-D. Kim, and D.-S. Kim Development of a Combined Type Tool Dynamometer with a Piezo-film Accelerometer for an Ultra-Precision Lathe Journal of Materials Processing Technology 71 1997 360 366
-
(1997)
Journal of Materials Processing Technology
, vol.71
, pp. 360-366
-
-
Kim, J.-D.1
Kim, D.-S.2
-
31
-
-
0242405507
-
A Dynamometer Design and Its Construction for Milling Operation
-
I. Korkut A Dynamometer Design and Its Construction for Milling Operation Materials and Design 24 2003 631 637
-
(2003)
Materials and Design
, vol.24
, pp. 631-637
-
-
Korkut, I.1
-
33
-
-
0034247264
-
A Silicon-based Shear Force Sensor: Development and Characterisation
-
L. Wang, and D.J. Beebe A Silicon-based Shear Force Sensor: Development and Characterisation Sensors & Actuators A 84 2000 33 44
-
(2000)
Sensors & Actuators A
, vol.84
, pp. 33-44
-
-
Wang, L.1
Beebe, D.J.2
-
34
-
-
77955560183
-
An Investigation into the Development of Surface Acoustic Wave (SAW) Devices as Strain Sensors
-
Dublin
-
B. Donohue, B. McCormac, D. Geraghty, and G.E. O'Donnell An Investigation into the Development of Surface Acoustic Wave (SAW) Devices as Strain Sensors 25th Int. Manuf. Conf. Dublin 2008 575 582
-
(2008)
25th Int. Manuf. Conf.
, pp. 575-582
-
-
Donohue, B.1
McCormac, B.2
Geraghty, D.3
O'Donnell, G.E.4
-
35
-
-
9644255563
-
Sensor to Detect Cutting Force Components, Cutting Torque, and Cutting Tool Deflections
-
H. Aoyama, and T. Ishii Sensor to Detect Cutting Force Components, Cutting Torque, and Cutting Tool Deflections Journal of Manufacture Processing 6 2004 141 147
-
(2004)
Journal of Manufacture Processing
, vol.6
, pp. 141-147
-
-
Aoyama, H.1
Ishii, T.2
-
39
-
-
0026155250
-
Adaptive Compensation of Dynamic Characteristics for In-process Sensors
-
S.A. Spiewak, and J. Di Corpo Adaptive Compensation of Dynamic Characteristics for In-process Sensors Journal of Engineering for Industry 113 1991 198 206
-
(1991)
Journal of Engineering for Industry
, vol.113
, pp. 198-206
-
-
Spiewak, S.A.1
Di Corpo, J.2
-
41
-
-
0018457826
-
The Application of Vibration Analysis and Acoustic Emission Source Location to On-line Condition Monitoring of Anti-friction Bearings
-
L.M. Rogers The Application of Vibration Analysis and Acoustic Emission Source Location to On-line Condition Monitoring of Anti-friction Bearings Tribology International 1979 51 59
-
(1979)
Tribology International
, pp. 51-59
-
-
Rogers, L.M.1
-
42
-
-
0027990193
-
An Approach to Monitoring of the Grinding Process Using Acoustic Emission Techniques
-
W. Hundt, D. Leuenberger, and F. Rehsteiner An Approach to Monitoring of the Grinding Process Using Acoustic Emission Techniques CIRP Annals 43 1 1994 295 298
-
(1994)
CIRP Annals
, vol.43
, Issue.1
, pp. 295-298
-
-
Hundt, W.1
Leuenberger, D.2
Rehsteiner, F.3
-
44
-
-
0031387916
-
Acoustic emission monitoring of tool wear during the face milling of steels and aluminium alloys using a fibre optic sensor. Part 1: Energy analysis
-
T.A. Caralon, S.R. Kidd, D.P. Hand, S.J. Wilcox, P. Wilkinson, J.S. Barton, J.D.C. Jones, and R.L. Reuben AE Monitoring of Tool Wear During the Face Milling of Steels and Aluminium Alloys Using a Fibre Optic Sensor, Part 1: Energy Analysis IMechE 211 1997 299 309 (Pubitemid 127759575)
-
(1997)
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
, vol.211
, Issue.4
, pp. 299-309
-
-
Carolan, T.A.1
Kidd, S.R.2
Hand, D.P.3
Wilcox, S.J.4
Wilkinson, P.5
Barton, J.S.6
Jones, J.D.C.7
Reuben, R.L.8
-
45
-
-
0031369711
-
Acoustic emission monitoring of tool wear during the face milling of steels and aluminium alloys using a fibre optic sensor. Part 2: Frequency analysis
-
T.A. Caralon, S.R. Kidd, D.P. Hand, S.J. Wilcox, P. Wilkinson, J.S. Barton, J.D.C. Jones, and R.L. Reuben AE Monitoring of Tool Wear During the Face Milling of Steels and Aluminium Alloys Using a Fibre Optic Sensor, Part 2: Frequency Analysis IMechE 211 1997 311 319 (Pubitemid 127759576)
-
(1997)
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
, vol.211
, Issue.4
, pp. 311-319
-
-
Carolan, T.A.1
Kidd, S.R.2
Hand, D.P.3
Wilcox, S.J.4
Wilkinson, P.5
Barton, J.S.6
Jones, J.D.C.7
Reuben, R.L.8
-
46
-
-
0031995468
-
Application of Acoustic Emission Sensor for Monitoring Machining Processes
-
I. Inasaki Application of Acoustic Emission Sensor for Monitoring Machining Processes Ultrasonics 36 1998 273 281
-
(1998)
Ultrasonics
, vol.36
, pp. 273-281
-
-
Inasaki, I.1
-
49
-
-
0033690909
-
Grinding Monitoring System Based on Power and AE Sensing
-
B. Karpuschewski, M. Wehmeier, and I. Inasaki Grinding Monitoring System Based on Power and AE Sensing CIRP Annals 49 1 2000 235 240
-
(2000)
CIRP Annals
, vol.49
, Issue.1
, pp. 235-240
-
-
Karpuschewski, B.1
Wehmeier, M.2
Inasaki, I.3
-
50
-
-
0035254090
-
Some Aspects of Acoustic Emission Signal Pre-processing
-
K. Jemielniak Some Aspects of Acoustic Emission Signal Pre-processing Journal of Material Processing Technology 109 2001 242 247
-
(2001)
Journal of Material Processing Technology
, vol.109
, pp. 242-247
-
-
Jemielniak, K.1
-
53
-
-
77955550546
-
Entwicklungsschritte zum intelligenten Werkzeug
-
F. Klocke, and R. Schmitz Entwicklungsschritte zum intelligenten Werkzeug wt Werkstattstechnik 91 2001 248 254
-
(2001)
Wt Werkstattstechnik
, vol.91
, pp. 248-254
-
-
Klocke, F.1
Schmitz, R.2
-
55
-
-
36249012587
-
On the Measurement of Temperature in Material Removal Processes
-
M.A. Davies, T. Ueda, R. M'Saoubi, B. Mullany, and A.L. Cooke On the Measurement of Temperature in Material Removal Processes CIRP Annals 56 02 2007 581 604
-
(2007)
CIRP Annals
, vol.56
, Issue.2
, pp. 581-604
-
-
Davies, M.A.1
Ueda, T.2
M'Saoubi, R.3
Mullany, B.4
Cooke, A.L.5
-
56
-
-
0031245008
-
A Review of Machine Vision Sensors for TCM
-
S. Kurada, and C. Bradley A Review of Machine Vision Sensors for TCM Computers in Industry 34 1997 55 72
-
(1997)
Computers in Industry
, vol.34
, pp. 55-72
-
-
Kurada, S.1
Bradley, C.2
-
57
-
-
0029716482
-
An In-process Direct Monitoring Method for Milling Tool Failures Using a Laser Sensor
-
O. Ryabov, K. Mori, and N. Kasashima An In-process Direct Monitoring Method for Milling Tool Failures Using a Laser Sensor CIRP Annals 45 1 1996 97 100
-
(1996)
CIRP Annals
, vol.45
, Issue.1
, pp. 97-100
-
-
Ryabov, O.1
Mori, K.2
Kasashima, N.3
-
58
-
-
0034291603
-
Application of Image and Sound Analysis Techniques to Monitor the Condition of Cutting Tools
-
M.A. Mannan, A.A. Kassim, and M. Jing Application of Image and Sound Analysis Techniques to Monitor the Condition of Cutting Tools Pattern Recognition Letters 21 2000 969 979
-
(2000)
Pattern Recognition Letters
, vol.21
, pp. 969-979
-
-
Mannan, M.A.1
Kassim, A.A.2
Jing, M.3
-
59
-
-
0030680851
-
In-process Monitoring Method for Machining Environment Based on Simultaneous Multiphenomena Sensing
-
H. Shinno, and H. Hashizume In-process Monitoring Method for Machining Environment Based on Simultaneous Multiphenomena Sensing CIRP Annals 46 1 1997 53 56
-
(1997)
CIRP Annals
, vol.46
, Issue.1
, pp. 53-56
-
-
Shinno, H.1
Hashizume, H.2
-
62
-
-
0032121219
-
The Influence of Working Parameters on the Response of a Capacitive Sensor for In-process Measurement of Tool Wear
-
F. Caiazzo, G. Palazzo, and R. Pasquino The Influence of Working Parameters on the Response of a Capacitive Sensor for In-process Measurement of Tool Wear International Journal of Machine Tools and Manufacture 38 1998 871 879
-
(1998)
International Journal of Machine Tools and Manufacture
, vol.38
, pp. 871-879
-
-
Caiazzo, F.1
Palazzo, G.2
Pasquino, R.3
-
63
-
-
0033721901
-
Analytical Model for Tool Wear Monitoring in Turning Operations Using Ultrasound Waves
-
N. Abu-Zahra, and G. Yu Analytical Model for Tool Wear Monitoring in Turning Operations Using Ultrasound Waves International Journal of Machine Tool and Manufacture 40 2000 1619 1635
-
(2000)
International Journal of Machine Tool and Manufacture
, vol.40
, pp. 1619-1635
-
-
Abu-Zahra, N.1
Yu, G.2
-
67
-
-
0033728441
-
Sensor Signals for Tool-wear Monitoring in Metal Cutting: A Review of Methods
-
D.E. Dimla Sensor Signals for Tool-wear Monitoring in Metal Cutting: A Review of Methods International Journal of Machine Tools and Manufacture 40 2000 1073 1098
-
(2000)
International Journal of Machine Tools and Manufacture
, vol.40
, pp. 1073-1098
-
-
Dimla, D.E.1
-
68
-
-
0036027418
-
A Brief Review-Acoustic Emission Method for Tool Wear Monitoring in Turning
-
X. Li A Brief Review-Acoustic Emission Method for Tool Wear Monitoring in Turning International Journal of Machine Tools and Manufacture 42 2002 157 165
-
(2002)
International Journal of Machine Tools and Manufacture
, vol.42
, pp. 157-165
-
-
Li, X.1
-
69
-
-
0036664145
-
On-line and Indirect Tool Wear Monitoring in Turning with Artificial Neural Networks: A Review of More Than a Decade of Research
-
B. Sick On-line and Indirect Tool Wear Monitoring in Turning with Artificial Neural Networks: A Review of More Than a Decade of Research Mechanical Systems and Signal Processing 16 4 2002 487 546
-
(2002)
Mechanical Systems and Signal Processing
, vol.16
, Issue.4
, pp. 487-546
-
-
Sick, B.1
-
70
-
-
34247098917
-
Hierarchical Strategies in Tool Wear Monitoring
-
K. Jemielniak, and S. Bombiński Hierarchical Strategies in Tool Wear Monitoring Proc. IMechE, 220/B 2006 375 381
-
(2006)
Proc. IMechE, 220/B
, pp. 375-381
-
-
Jemielniak, K.1
Bombiński, S.2
-
71
-
-
0033902549
-
Some Aspects of AE Application in Tool Condition Monitoring
-
K. Jemielniak Some Aspects of AE Application in Tool Condition Monitoring Ultrasonics 38 2000 604 608
-
(2000)
Ultrasonics
, vol.38
, pp. 604-608
-
-
Jemielniak, K.1
-
72
-
-
3142781454
-
Dynamic Compensation of Spindle-integrated Force Sensors
-
Y. Altintas, and S.S. Park Dynamic Compensation of Spindle-integrated Force Sensors CIRP Annals 53 1 2004 305 308
-
(2004)
CIRP Annals
, vol.53
, Issue.1
, pp. 305-308
-
-
Altintas, Y.1
Park, S.S.2
-
73
-
-
2942562195
-
An Industrial Tool Wear Monitoring System for Interrupted Turning
-
C. Scheffer, and P.C. Heyns An Industrial Tool Wear Monitoring System for Interrupted Turning Mechanical Systems and Signal Processing 18 2004 1219 1242
-
(2004)
Mechanical Systems and Signal Processing
, vol.18
, pp. 1219-1242
-
-
Scheffer, C.1
Heyns, P.C.2
-
74
-
-
0027097467
-
Detection of Cutting Edge Breakage in Turning
-
K. Jemielniak, and M. Szafarczyk Detection of Cutting Edge Breakage in Turning CIRP Annals 41 1 1992 97 100
-
(1992)
CIRP Annals
, vol.41
, Issue.1
, pp. 97-100
-
-
Jemielniak, K.1
Szafarczyk, M.2
-
75
-
-
33749507805
-
Estimation of Tool Wear during CNC Milling Using NN-based Sensor Fusion
-
N. Ghosh, A. Ravi, S. Patra, S. Mukhopadhyay, A. Mohanty, and A. Chattopadhyay Estimation of Tool Wear During CNC Milling Using NN-based Sensor Fusion Mechanical Systems and Signal Processing 21 2007 466 479
-
(2007)
Mechanical Systems and Signal Processing
, vol.21
, pp. 466-479
-
-
Ghosh, N.1
Ravi, A.2
Patra, S.3
Mukhopadhyay, S.4
Mohanty, A.5
Chattopadhyay, A.6
-
76
-
-
37549028448
-
Complexity Measure of Motor Current Signals for Tool Flute Breakage Detection in End Milling
-
X. Li, G. Ouyang, and Z. Liang Complexity Measure of Motor Current Signals for Tool Flute Breakage Detection in End Milling International Journal of Machine Tools and Manufacture 48 2008 371 379
-
(2008)
International Journal of Machine Tools and Manufacture
, vol.48
, pp. 371-379
-
-
Li, X.1
Ouyang, G.2
Liang, Z.3
-
77
-
-
34249721512
-
Cutting Force-based Real-time Estimation of Tool Wear in Face Milling Using a Combination of Signal Processing Techniques
-
P. Bhattacharyya, D. Sengupta, and S. Mukhopadhyay Cutting Force-based Real-time Estimation of Tool Wear in Face Milling Using a Combination of Signal Processing Techniques Mechanical Systems and Signal Processing 21 2007 2665 2683
-
(2007)
Mechanical Systems and Signal Processing
, vol.21
, pp. 2665-2683
-
-
Bhattacharyya, P.1
Sengupta, D.2
Mukhopadhyay, S.3
-
78
-
-
43649092739
-
A Critical Analysis of Effectiveness of Acoustic Emission Signals to Detect Tool and Workpiece Malfunctions in Milling Operations
-
I. Marinescu, and D. Axinte A Critical Analysis of Effectiveness of Acoustic Emission Signals to Detect Tool and Workpiece Malfunctions in Milling Operations International Journal of Machine Tools and Manufacture 48 2008 1148 1160
-
(2008)
International Journal of Machine Tools and Manufacture
, vol.48
, pp. 1148-1160
-
-
Marinescu, I.1
Axinte, D.2
-
79
-
-
33750009420
-
Bayesian-inference-based Neural Networks for Tool Wear Estimation
-
J. Dong, K.V.R. Subrahmanyam, Y.S. Wong, G.S. Hong, and A.R. Mohanty Bayesian-inference-based Neural Networks for Tool Wear Estimation International Journal of Advanced Manufacturing Technology 30 2006 797 807
-
(2006)
International Journal of Advanced Manufacturing Technology
, vol.30
, pp. 797-807
-
-
Dong, J.1
Subrahmanyam, K.V.R.2
Wong, Y.S.3
Hong, G.S.4
Mohanty, A.R.5
-
80
-
-
0342610287
-
Catastrophic Tool Failure Detection Based on AE Signal Analysis
-
K. Jemielniak, and O. Otman Catastrophic Tool Failure Detection Based on AE Signal Analysis CIRP Annals 47 1 1998 31 34
-
(1998)
CIRP Annals
, vol.47
, Issue.1
, pp. 31-34
-
-
Jemielniak, K.1
Otman, O.2
-
81
-
-
43649087943
-
Tool Condition Monitoring in Micromilling Based on Hierarchical Integration of Signal Measures
-
K. Jemielniak, S. Bombinski, and P.X. Aristimuno Tool Condition Monitoring in Micromilling Based on Hierarchical Integration of Signal Measures CIRP Annals 57 1 2008 121 124
-
(2008)
CIRP Annals
, vol.57
, Issue.1
, pp. 121-124
-
-
Jemielniak, K.1
Bombinski, S.2
Aristimuno, P.X.3
-
82
-
-
0036686951
-
Chip Disposal State Monitoring in Drilling Using Neural Network Based Spindle Motor Power Sensing
-
H.-Y. Kim, and J.-H. Ahn Chip Disposal State Monitoring in Drilling Using Neural Network Based Spindle Motor Power Sensing International Journal of Machine Tools and Manufacture 42 2002 1113 1119
-
(2002)
International Journal of Machine Tools and Manufacture
, vol.42
, pp. 1113-1119
-
-
Kim, H.-Y.1
Ahn, J.-H.2
-
83
-
-
30844471385
-
Tool Wear Detection in Turning Operations Using Singular Spectrum Analysis
-
D. Salgado, and F. Alonso Tool Wear Detection in Turning Operations Using Singular Spectrum Analysis Journal of Materials Processing Technology 171 2006 451 458
-
(2006)
Journal of Materials Processing Technology
, vol.171
, pp. 451-458
-
-
Salgado, D.1
Alonso, F.2
-
84
-
-
0035520754
-
Wear Monitoring in Turning Operations Using Vibration and Strain Measurements
-
C. Scheffer, and P.C. Heyns Wear Monitoring in Turning Operations Using Vibration and Strain Measurements Mechanical Systems and Signal Processing 15 6 2001 1185 1202
-
(2001)
Mechanical Systems and Signal Processing
, vol.15
, Issue.6
, pp. 1185-1202
-
-
Scheffer, C.1
Heyns, P.C.2
-
85
-
-
1342329898
-
Identification of Feature Set for Effective Tool Condition Monitoring by AE Sensing
-
J. Sun, G.S. Hong, M. Rahman, and Y.S. Wong Identification of Feature Set for Effective Tool Condition Monitoring by AE Sensing International Journal of Production Research 42 5 2004 901 918
-
(2004)
International Journal of Production Research
, vol.42
, Issue.5
, pp. 901-918
-
-
Sun, J.1
Hong, G.S.2
Rahman, M.3
Wong, Y.S.4
-
86
-
-
56249121170
-
Multi-category Micro-milling Tool Wear Monitoring with Continuous Hidden Markov Models
-
K. Zhu, Y.S. Wong, and G.S. Hong Multi-category Micro-milling Tool Wear Monitoring with Continuous Hidden Markov Models Mechanical Systems and Signal Processing 23 2009 547 560
-
(2009)
Mechanical Systems and Signal Processing
, vol.23
, pp. 547-560
-
-
Zhu, K.1
Wong, Y.S.2
Hong, G.S.3
-
87
-
-
67349144405
-
Machine Ensemble Approach for Simultaneous Detection of Transient and Gradual Anomalies in Milling Using Multisensor Fusion
-
S. Binsaeid, S. Asfoura, S. Chob, and A. Onarc Machine Ensemble Approach for Simultaneous Detection of Transient and Gradual Anomalies in Milling Using Multisensor Fusion Journal of Materials Processing Technology 209 2009 4728 4738
-
(2009)
Journal of Materials Processing Technology
, vol.209
, pp. 4728-4738
-
-
Binsaeid, S.1
Asfoura, S.2
Chob, S.3
Onarc, A.4
-
88
-
-
0037277630
-
An In-process Neural Network-based Surface Roughness Prediction System Using a Dynamometer in End Milling Operations
-
B. Huang, and J.C. Chen An In-process Neural Network-based Surface Roughness Prediction System Using a Dynamometer in End Milling Operations International Journal of Advanced Manufacturing Technology 21 2003 339 347
-
(2003)
International Journal of Advanced Manufacturing Technology
, vol.21
, pp. 339-347
-
-
Huang, B.1
Chen, J.C.2
-
91
-
-
0034316280
-
A New Approach for Systematic Design of Condition Monitoring Systems for Milling Processes
-
A. Al-Habaibeh, and N. Gindy A New Approach for Systematic Design of Condition Monitoring Systems for Milling Processes Journal of Materials Processing Technology 107 2000 243 251
-
(2000)
Journal of Materials Processing Technology
, vol.107
, pp. 243-251
-
-
Al-Habaibeh, A.1
Gindy, N.2
-
94
-
-
0032184390
-
Diagnosis of Tool Wear Based on Cutting Forces and AE Measures as Inputs to Neural Network
-
K. Jemielniak, L. Kwiatkowski, and P. Wrzosek Diagnosis of Tool Wear Based on Cutting Forces and AE Measures as Inputs to Neural Network Journal of Intelligent Manufacturing 9 1998 447 455
-
(1998)
Journal of Intelligent Manufacturing
, vol.9
, pp. 447-455
-
-
Jemielniak, K.1
Kwiatkowski, L.2
Wrzosek, P.3
-
95
-
-
0020089473
-
A Study of Tool Wear Using Statistical Analysis of Metal Cutting Acoustic Emission
-
DOI 10.1016/0043-1648(82)90009-6
-
E. Kannatey-Asibu, and D. Dornfeld A Study of Tool Wear Using Statistical Analysis of Metal Cutting Acoustic Emission Wear 76 1982 247 261 (Pubitemid 12524385)
-
(1982)
Wear
, vol.76
, Issue.2
, pp. 247-261
-
-
Kannatey-Asibu Jr., E.1
Dornfeld, D.A.2
-
96
-
-
0032048260
-
Tool failure detection based on analysis of acoustic emission signals
-
PII S0924013697003798
-
K. Jemielniak, and O. Otman Tool Failure Detection Based on Analysis of Acoustic Emision Signals Journal of Materials Processing Technology 76 1998 192 197 (Pubitemid 128407322)
-
(1998)
Journal of Materials Processing Technology
, vol.76
, Issue.1-3
, pp. 192-197
-
-
Jemielniak, K.1
Otman, O.2
-
97
-
-
34548729035
-
Directionally Independent Failure Prediction of End-milling Tools during Pocketing Maneuvers
-
A. Christophe, A. Suprock, J. Piazza, and J.T. Roth Directionally Independent Failure Prediction of End-milling Tools During Pocketing Maneuvers Journal of Manufacturing Science and Engineering 129 4 2007 770 779
-
(2007)
Journal of Manufacturing Science and Engineering
, vol.129
, Issue.4
, pp. 770-779
-
-
Christophe, A.1
Suprock, A.2
Piazza, J.3
Roth, J.T.4
-
98
-
-
33846844788
-
Tool Wear Predictive Model Based on Least Squares Support Vector Machines
-
D. Shi, and N.N. Gindy Tool Wear Predictive Model Based on Least Squares Support Vector Machines Mechanical Systems and Signal Processing 21 2007 1799 1814
-
(2007)
Mechanical Systems and Signal Processing
, vol.21
, pp. 1799-1814
-
-
Shi, D.1
Gindy, N.N.2
-
101
-
-
38149114090
-
Analysis of the Structure of Vibration Signals for Tool Wear Detection
-
F. Alonso, and D. Salgado Analysis of the Structure of Vibration Signals for Tool Wear Detection Mechanical Systems and Signal Processing 22 2008 735 748
-
(2008)
Mechanical Systems and Signal Processing
, vol.22
, pp. 735-748
-
-
Alonso, F.1
Salgado, D.2
-
103
-
-
67349274965
-
Sensorless Automated Condition Monitoring for the Control of the Predictive Maintenance of Machine Tools
-
A. Verl, U. Heisel, M. Walther, and D. Maier Sensorless Automated Condition Monitoring for the Control of the Predictive Maintenance of Machine Tools CIRP Annals 58 2009 375 378
-
(2009)
CIRP Annals
, vol.58
, pp. 375-378
-
-
Verl, A.1
Heisel, U.2
Walther, M.3
Maier, D.4
-
104
-
-
0032141401
-
An Investigation of the Cutting Process for Chip Breaking Monitoring in Turning of Steels
-
W. Grzesik, and P. Bernat An Investigation of the Cutting Process for Chip Breaking Monitoring in Turning of Steels Journal of Manufacturing Science and Engineering 120 3 1998 555 562
-
(1998)
Journal of Manufacturing Science and Engineering
, vol.120
, Issue.3
, pp. 555-562
-
-
Grzesik, W.1
Bernat, P.2
-
105
-
-
0343602836
-
Analysis of AE Signals and Monitoring of Machining Processes
-
E. Govekar, J. Gradisek, and I. Grabec Analysis of AE Signals and Monitoring of Machining Processes Ultrasonics 38 2000 598 603
-
(2000)
Ultrasonics
, vol.38
, pp. 598-603
-
-
Govekar, E.1
Gradisek, J.2
Grabec, I.3
-
106
-
-
67349130081
-
In-process Monitoring and Detection of Chip Formation and Chatter for CNC Turning
-
S. Tangjitsitcharoen In-process Monitoring and Detection of Chip Formation and Chatter for CNC Turning Journal of Materials Processing Technology 2009 doi:10.1016/j.jmatprotec.2008.10.054
-
(2009)
Journal of Materials Processing Technology
-
-
Tangjitsitcharoen, S.1
-
107
-
-
0035803629
-
Surface Roughness Prediction Based on Cutting Parameters and Tool Vibration in Turning
-
O. Abouelatta, and J. Madl Surface Roughness Prediction Based on Cutting Parameters and Tool Vibration in Turning Journal of Materials Processing Technology 118 2001 269 277
-
(2001)
Journal of Materials Processing Technology
, vol.118
, pp. 269-277
-
-
Abouelatta, O.1
Madl, J.2
-
108
-
-
55649120206
-
A Time-frequency AE-based Monitoring Technique to Identify Workpiece Surface Malfunctions in Milling with Multiple Teeth Cutting Simultaneously
-
I. Marinescu, and D. Axinte A Time-frequency AE-based Monitoring Technique to Identify Workpiece Surface Malfunctions in Milling with Multiple Teeth Cutting Simultaneously International Journal of Machine Tools and Manufacture 49 2009 53 65
-
(2009)
International Journal of Machine Tools and Manufacture
, vol.49
, pp. 53-65
-
-
Marinescu, I.1
Axinte, D.2
-
109
-
-
0024700097
-
A Theory of Multiresolution Signal Decomposition: The Wavelet Representation
-
S.G. Mallat A Theory of Multiresolution Signal Decomposition: The Wavelet Representation IEEE Transactions on Pattern and Machine Intelligence 11 7 1989 674 693
-
(1989)
IEEE Transactions on Pattern and Machine Intelligence
, vol.11
, Issue.7
, pp. 674-693
-
-
Mallat, S.G.1
-
110
-
-
0025482241
-
The Wavelet Transform, Time-frequency Localization & Signal Analysis
-
I. Daubechies The Wavelet Transform, Time-frequency Localization & Signal Analysis IEEE Transactions on Information Theory 36 1990 1056-1005
-
(1990)
IEEE Transactions on Information Theory
, vol.36
-
-
Daubechies, I.1
-
112
-
-
0029755708
-
Feature Extraction and Assessment Using Wavelet Packets for Monitoring of Machining Processes
-
Y. Wu, and R. Du Feature Extraction and Assessment Using Wavelet Packets for Monitoring of Machining Processes Mechanical Systems and Signal Processing 10 1 1996 29 53
-
(1996)
Mechanical Systems and Signal Processing
, vol.10
, Issue.1
, pp. 29-53
-
-
Wu, Y.1
Du, R.2
-
115
-
-
0032786325
-
On-line Detection of the Breakage of Small Diameter Drills Using Wavelet
-
L. Xiaoli On-line Detection of the Breakage of Small Diameter Drills Using Wavelet International Journal of Machine Tools and Manufacture 39 1999 157 164
-
(1999)
International Journal of Machine Tools and Manufacture
, vol.39
, pp. 157-164
-
-
Xiaoli, L.1
-
116
-
-
0033177812
-
Amplitude Demodulation of the Induction Motor Current for Tool Breakage Detection in Drilling Operations
-
Y.S. Tarng, and B.Y. Lee Amplitude Demodulation of the Induction Motor Current for Tool Breakage Detection in Drilling Operations Robotics and Computer Integrated Manufacturing 15 1999 313 318
-
(1999)
Robotics and Computer Integrated Manufacturing
, vol.15
, pp. 313-318
-
-
Tarng, Y.S.1
Lee, B.Y.2
-
117
-
-
33646190241
-
Application of Wavelet Transform Technique to Detect Tool Failure in Turning
-
J.-S. Kwak Application of Wavelet Transform Technique to Detect Tool Failure in Turning International Journal of Advanced Manufacturing Technology 28 2006 1078 1083
-
(2006)
International Journal of Advanced Manufacturing Technology
, vol.28
, pp. 1078-1083
-
-
Kwak, J.-S.1
-
118
-
-
33750043506
-
Chip Form Monitoring through Advanced Processing of Cutting Force Sensor Signals
-
R. Teti, I.S. Jawahir, K. Jemielniak, T. Segreto, S. Chen, and J. Kossakowska Chip Form Monitoring through Advanced Processing of Cutting Force Sensor Signals CIRP Annals 55 1 2006 75 80
-
(2006)
CIRP Annals
, vol.55
, Issue.1
, pp. 75-80
-
-
Teti, R.1
Jawahir, I.S.2
Jemielniak, K.3
Segreto, T.4
Chen, S.5
Kossakowska, J.6
-
126
-
-
33846815061
-
Flute Breakage Detection during End Milling Using Hilbert-Huang Transform and Smoothed Nonlinear Energy Operator
-
A.M. Bassiuny, and X. Li Flute Breakage Detection during End Milling Using Hilbert-Huang Transform and Smoothed Nonlinear Energy Operator International Journal of Machine Tools and Manufacture 47 2007 1011 1020
-
(2007)
International Journal of Machine Tools and Manufacture
, vol.47
, pp. 1011-1020
-
-
Bassiuny, A.M.1
Li, X.2
-
128
-
-
33645321115
-
Empirical Model Decomposition Based Time-frequency Analysis for the Effective Detection of Tool Breakage
-
Y. Peng Empirical Model Decomposition Based Time-frequency Analysis for the Effective Detection of Tool Breakage Journal of Manufacturing Science and Engineering 128 1 2006 154 166
-
(2006)
Journal of Manufacturing Science and Engineering
, vol.128
, Issue.1
, pp. 154-166
-
-
Peng, Y.1
-
131
-
-
77955552345
-
Application of Wavelet Transform of AE Signal for Tool Condition Monitoring in Face Milling
-
Ljubljana
-
E. Kuljanic, M. Sortino, and G. Totis Application of Wavelet Transform of AE Signal for Tool Condition Monitoring in Face Milling 39th CIRP Int. Sem. on Manuf. Systems Ljubljana 2006 39 44
-
(2006)
39th CIRP Int. Sem. on Manuf. Systems
, pp. 39-44
-
-
Kuljanic, E.1
Sortino, M.2
Totis, G.3
-
132
-
-
0037307326
-
Tool Condition Monitoring in Broaching
-
D. Axinte, and N. Gindy Tool Condition Monitoring in Broaching Wear 254 3-4 2003 370 382
-
(2003)
Wear
, vol.254
, Issue.34
, pp. 370-382
-
-
Axinte, D.1
Gindy, N.2
-
133
-
-
58549091176
-
Neural Network Processing of Audible Sound Signal Parameters for Sensor Monitoring of Tool Conditions
-
Sorrento, 30 June-2 July
-
R. Teti, and I.L. Baciu Neural Network Processing of Audible Sound Signal Parameters for Sensor Monitoring of Tool Conditions 4th CIRP Int. Sem. on ICME Sorrento, 30 June-2 July 2004 385 390
-
(2004)
4th CIRP Int. Sem. on ICME
, pp. 385-390
-
-
Teti, R.1
Baciu, I.L.2
-
134
-
-
8344242029
-
Breakage Detection of Small-diameter Tap Using Vision System in High-speed Tapping Machine with Open Architecture Controller
-
D.J. Lee, S.H. Kim, and J.H. Ahn Breakage Detection of Small-diameter Tap Using Vision System in High-speed Tapping Machine with Open Architecture Controller KSME International Journal 18 7 2004 1055 1061
-
(2004)
KSME International Journal
, vol.18
, Issue.7
, pp. 1055-1061
-
-
Lee, D.J.1
Kim, S.H.2
Ahn, J.H.3
-
135
-
-
0037142635
-
Real Time Drill Wear Estimation Based on Spindle Motor Power
-
H. Kim, J. Ahn, S. Kim, and S. Takata Real Time Drill Wear Estimation Based on Spindle Motor Power Journal of Materials Processing Technology 124 3 2002 267 273
-
(2002)
Journal of Materials Processing Technology
, vol.124
, Issue.3
, pp. 267-273
-
-
Kim, H.1
Ahn, J.2
Kim, S.3
Takata, S.4
-
136
-
-
43849101852
-
The Effect of Machinability on Thermal Fields in Orthogonal Cutting of AISI 4140 Steel
-
P.J. Arrazola, I. Arriola, M.A. Davies, A.L. Cooke, and B.S. Dutterer The Effect of Machinability on Thermal Fields in Orthogonal Cutting of AISI 4140 Steel CIRP Annals 57 1 2008 65 68
-
(2008)
CIRP Annals
, vol.57
, Issue.1
, pp. 65-68
-
-
Arrazola, P.J.1
Arriola, I.2
Davies, M.A.3
Cooke, A.L.4
Dutterer, B.S.5
-
137
-
-
34247109116
-
New Methods for Tool Failure Detection in Micromilling
-
E. Gandarias, S. Dimov, D.T. Pham, A. Ivanov, K. Popov, R. Lizarralde, and P.J. Arrazola New Methods for Tool Failure Detection in Micromilling Proceedings of IMechE 220 2 2006 137 144
-
(2006)
Proceedings of IMechE
, vol.220
, Issue.2
, pp. 137-144
-
-
Gandarias, E.1
Dimov, S.2
Pham, D.T.3
Ivanov, A.4
Popov, K.5
Lizarralde, R.6
Arrazola, P.J.7
-
138
-
-
77955557158
-
Spectrum Estimation and Processing of Cutting Force Sensor Signals for Chip Form Monitoring and Classification
-
1-14 July
-
D. D'Addona, A. Keshari, and R. Teti Spectrum Estimation and Processing of Cutting Force Sensor Signals for Chip Form Monitoring and Classification 4th Virtual Int. Conf. on IPROMS 1-14 July 2008 555 560
-
(2008)
4th Virtual Int. Conf. on IPROMS
, pp. 555-560
-
-
D'Addona, D.1
Keshari, A.2
Teti, R.3
-
140
-
-
0031632526
-
An Automatic System for Elaboration of Chip Breaking Diagrams
-
J.L. Andreasen, and L. De Chiffre An Automatic System for Elaboration of Chip Breaking Diagrams CIRP Annals 47 1 1998 35 40
-
(1998)
CIRP Annals
, vol.47
, Issue.1
, pp. 35-40
-
-
Andreasen, J.L.1
De Chiffre, L.2
-
142
-
-
0036497653
-
Use of Radial Forces for Fault Detection in Tapping
-
O.A. Mezentsev, R. Zhu, R.E. DeVor, S.G. Kapoor, and W.A. Kline Use of Radial Forces for Fault Detection in Tapping International Journal of Machine Tools and Manufacture 42 2002 479 488
-
(2002)
International Journal of Machine Tools and Manufacture
, vol.42
, pp. 479-488
-
-
Mezentsev, O.A.1
Zhu, R.2
Devor, R.E.3
Kapoor, S.G.4
Kline, W.A.5
-
143
-
-
34547198888
-
Development of an online machining process monitoring system: A case study of the broaching process
-
DOI 10.1007/s00170-006-0588-1
-
D. Shi, D. Axinte, and N. Gindy Development of an Online Machining Process Monitoring System: A Case Study of the Broaching Process International Journal of Advanced Manufacturing Technology 34 1-2 2007 34 46 (Pubitemid 47123395)
-
(2007)
International Journal of Advanced Manufacturing Technology
, vol.34
, Issue.1-2
, pp. 34-46
-
-
Shi, D.1
Axinte, D.A.2
Gindy, N.N.3
-
144
-
-
58549118249
-
Cutting Parameters Analysis for the Development of a Milling Process Monitoring System Based on Audible Energy Sound
-
E.M. Rubio, and R. Teti Cutting Parameters Analysis for the Development of a Milling Process Monitoring System Based on Audible Energy Sound Journal of Intelligent Manufacturing 20 1 2009 43 54
-
(2009)
Journal of Intelligent Manufacturing
, vol.20
, Issue.1
, pp. 43-54
-
-
Rubio, E.M.1
Teti, R.2
-
147
-
-
0038176330
-
Integrated Virtual Manufacturing Systems for Process Optimisation and Monitoring
-
L. Chen, P. Bender, P. Renton, and T. El-Wardany Integrated Virtual Manufacturing Systems for Process Optimisation and Monitoring CIRP Annals 51 1 2002 409 412
-
(2002)
CIRP Annals
, vol.51
, Issue.1
, pp. 409-412
-
-
Chen, L.1
Bender, P.2
Renton, P.3
El-Wardany, T.4
-
148
-
-
21844466725
-
Slicing Process Monitoring of Quartz Glass Ferrules with AE
-
J. Ahn, S. Kim, H. Kim, S. Kim, and K. Cho Slicing Process Monitoring of Quartz Glass Ferrules with AE CIRP Annals 54 1 2005 297 300
-
(2005)
CIRP Annals
, vol.54
, Issue.1
, pp. 297-300
-
-
Ahn, J.1
Kim, S.2
Kim, H.3
Kim, S.4
Cho, K.5
-
149
-
-
0035427233
-
Development of a Sensor Information Integrated Expert System for Optimizing Die Polishing
-
J.H. Ahn, Y.F. Shen, H.Y. Kim, H.D. Jeong, and K.K. Cho Development of a Sensor Information Integrated Expert System for Optimizing Die Polishing Robotics and CIM 17 4 2001 269 276
-
(2001)
Robotics and CIM
, vol.17
, Issue.4
, pp. 269-276
-
-
Ahn, J.H.1
Shen, Y.F.2
Kim, H.Y.3
Jeong, H.D.4
Cho, K.K.5
-
151
-
-
0031233460
-
On-line Prediction of Surface Finish and Dimensional Deviation in Turning Using Neural Network Based Sensor Fusion
-
R. Azouzi, and M. Guillot On-line Prediction of Surface Finish and Dimensional Deviation in Turning Using Neural Network Based Sensor Fusion International Journal of Machine Tools and Manufacture 37 9 1997 1201 1217
-
(1997)
International Journal of Machine Tools and Manufacture
, vol.37
, Issue.9
, pp. 1201-1217
-
-
Azouzi, R.1
Guillot, M.2
-
152
-
-
13844309935
-
A New Approach to Cutting State Monitoring in End-mill Machining
-
D.Y. Song, N. Otani, T. Aoki, Y. Kamakoshi, Y. Ohara, and H. Tamaki A New Approach to Cutting State Monitoring in End-mill Machining International Journal of Machine Tools and Manufacture 45 2005 909 921
-
(2005)
International Journal of Machine Tools and Manufacture
, vol.45
, pp. 909-921
-
-
Song, D.Y.1
Otani, N.2
Aoki, T.3
Kamakoshi, Y.4
Ohara, Y.5
Tamaki, H.6
-
154
-
-
33846794445
-
In-process Surface Roughness Prediction Using Displacement Signals from Spindle Motion
-
H.K. Chang, J.H. Kim, H. Kim, D.Y. Jang, and D.C. Han In-process Surface Roughness Prediction Using Displacement Signals from Spindle Motion International Journal of Machine Tools and Manufacture 47 2007 1021 1026
-
(2007)
International Journal of Machine Tools and Manufacture
, vol.47
, pp. 1021-1026
-
-
Chang, H.K.1
Kim, J.H.2
Kim, H.3
Jang, D.Y.4
Han, D.C.5
-
155
-
-
21944447419
-
Broaching of Ti-6-4-Detection of Workpiece Surface Anomalies on Dovetail Slots Through Process Monitoring
-
D. Axinte, F. Boud, J. Penny, N. Gindy, and D.J. Williams Broaching of Ti-6-4-Detection of Workpiece Surface Anomalies on Dovetail Slots Through Process Monitoring CIRP Annals 54 1 2005 87 90
-
(2005)
CIRP Annals
, vol.54
, Issue.1
, pp. 87-90
-
-
Axinte, D.1
Boud, F.2
Penny, J.3
Gindy, N.4
Williams, D.J.5
-
156
-
-
55649120206
-
A Time-frequency Acoustic Emission-based Monitoring Technique to Identify Workpiece Surface Malfunctions in Milling with Multiple Teeth Cutting Simultaneously
-
I. Marinescu, and D. Axinte A Time-frequency Acoustic Emission-based Monitoring Technique to Identify Workpiece Surface Malfunctions in Milling with Multiple Teeth Cutting Simultaneously International Journal of Machine Tools and Manufacture 49 1 2009 53 65
-
(2009)
International Journal of Machine Tools and Manufacture
, vol.49
, Issue.1
, pp. 53-65
-
-
Marinescu, I.1
Axinte, D.2
-
157
-
-
34548309367
-
An Experimental Analysis of Damped Coupled Vibrations in Broaching
-
D. Axinte An Experimental Analysis of Damped Coupled Vibrations in Broaching International Journal of Machine Tools and Manufacture 47 14 2007 2182 2188
-
(2007)
International Journal of Machine Tools and Manufacture
, vol.47
, Issue.14
, pp. 2182-2188
-
-
Axinte, D.1
-
158
-
-
43649092739
-
A Critical Analysis of Effectiveness of AE Signals to Detect Tool and Workpiece Malfunctions in Milling Operations
-
I. Marinescu, and D. Axinte A Critical Analysis of Effectiveness of AE Signals to Detect Tool and Workpiece Malfunctions in Milling Operations International Journal of Machine Tools and Manufacture 48 10 2008 1148 1160
-
(2008)
International Journal of Machine Tools and Manufacture
, vol.48
, Issue.10
, pp. 1148-1160
-
-
Marinescu, I.1
Axinte, D.2
-
159
-
-
23944483390
-
An Approach to Use an Array of Three AE Sensors to Locate Uneven Events in Machining-Part 1: Method and Validation
-
D. Axinte, D. Natarajan, and N.N. Gindy An Approach to Use an Array of Three AE Sensors to Locate Uneven Events in Machining-Part 1: Method and Validation International Journal of Machine Tools and Manufacture 45 14 2005 1605 1613
-
(2005)
International Journal of Machine Tools and Manufacture
, vol.45
, Issue.14
, pp. 1605-1613
-
-
Axinte, D.1
Natarajan, D.2
Gindy, N.N.3
-
160
-
-
67349175858
-
Characterization of the Dry High Speed Drilling Process of Woven Composites Using Machinability Maps Approach
-
S. Rawat, and H. Attia Characterization of the Dry High Speed Drilling Process of Woven Composites Using Machinability Maps Approach CIRP Annals 58 1 2009 105 108
-
(2009)
CIRP Annals
, vol.58
, Issue.1
, pp. 105-108
-
-
Rawat, S.1
Attia, H.2
-
161
-
-
0033718576
-
Integrated Condition Monitoring and Fault Diagnosis for Modern Manufacturing Systems
-
Z.D. Zhou, Y.P. Chen, J.Y.H. Fuh, and A.Y.C. Nee Integrated Condition Monitoring and Fault Diagnosis for Modern Manufacturing Systems CIRP Annals 49 1 2000 387 390
-
(2000)
CIRP Annals
, vol.49
, Issue.1
, pp. 387-390
-
-
Zhou, Z.D.1
Chen, Y.P.2
Fuh, J.Y.H.3
Nee, A.Y.C.4
-
164
-
-
0001134836
-
Wavelet Based Cutting State Identification
-
B. Berger, I. Minis, J. Harley, M. Rokni, and M. Papadopoulos Wavelet Based Cutting State Identification Journal of Sound and Vibration 213 5 1998 813 827
-
(1998)
Journal of Sound and Vibration
, vol.213
, Issue.5
, pp. 813-827
-
-
Berger, B.1
Minis, I.2
Harley, J.3
Rokni, M.4
Papadopoulos, M.5
-
165
-
-
22944434886
-
Cutting Force Monitoring in the Endmilling Operation for Chatter Detection
-
M. Yoon, and D. Chin Cutting Force Monitoring in the Endmilling Operation for Chatter Detection Journal of Engineering Manufacture 219 B 2005 455 645
-
(2005)
Journal of Engineering Manufacture
, vol.219
, Issue.B
, pp. 455-645
-
-
Yoon, M.1
Chin, D.2
-
166
-
-
71949128953
-
Multiple Classification of the Acoustic Emission Signals Extracted during Burn and Chatter Anomalies Using Genetic Programming
-
J.M. Griffin, and X. Chen Multiple Classification of the Acoustic Emission Signals Extracted During Burn and Chatter Anomalies Using Genetic Programming International Journal of Advanced Manufacturing Technology 45 2009 1152 1168
-
(2009)
International Journal of Advanced Manufacturing Technology
, vol.45
, pp. 1152-1168
-
-
Griffin, J.M.1
Chen, X.2
-
167
-
-
85051199348
-
Cutting Process Monitoring of Aeronautical Alluminum Alloys Through AE Techniques
-
Turin, 2-4 October
-
R. Teti, and U. La Commare Cutting Process Monitoring of Aeronautical Alluminum Alloys Through AE Techniques Int. Conf. on Innov. Metal Cutting Processes & Materials Turin, 2-4 October 1991 188 193
-
(1991)
Int. Conf. on Innov. Metal Cutting Processes & Materials
, pp. 188-193
-
-
Teti, R.1
La Commare, U.2
-
168
-
-
0027091583
-
Cutting Conditions & Work Material State Identification through AE Methods
-
R. Teti, and U. La Commare Cutting Conditions & Work Material State Identification through AE Methods CIRP Annals 41 1 1992 89 92
-
(1992)
CIRP Annals
, vol.41
, Issue.1
, pp. 89-92
-
-
Teti, R.1
La Commare, U.2
-
169
-
-
77955558243
-
Work Material State Monitoring Using Spectral Features
-
Palermo, 7-9 June
-
R. Teti, and P. Buonadonna Work Material State Monitoring Using Spectral Features 10th Int. Conf. on CAPE Palermo, 7-9 June 1994 51 63
-
(1994)
10th Int. Conf. on CAPE
, pp. 51-63
-
-
Teti, R.1
Buonadonna, P.2
-
170
-
-
77955551720
-
Investigation on Force Sensor Dynamics & Their Measurement Characteristics
-
Boston, MA, USA, 2-6 November
-
F. Klocke, S. Kratz, D. Veselovac, and P. Arrazola Investigation on Force Sensor Dynamics & Their Measurement Characteristics Int. Mech. Eng. Congr. & Exp. Boston, MA, USA, 2-6 November 2008
-
(2008)
Int. Mech. Eng. Congr. & Exp.
-
-
Klocke, F.1
Kratz, S.2
Veselovac, D.3
Arrazola, P.4
-
171
-
-
0034953065
-
Application of AE Contact Sensing in Reliable Grinding Monitoring
-
J.F.G. Oliveira, and D.A. Dornfeld Application of AE Contact Sensing in Reliable Grinding Monitoring CIRP Annals 50 1 2001 217 220
-
(2001)
CIRP Annals
, vol.50
, Issue.1
, pp. 217-220
-
-
Oliveira, J.F.G.1
Dornfeld, D.A.2
-
172
-
-
0012225135
-
On-line Monitoring of Tool Wear & Control of Dimensional Inaccuracy in Turning
-
S.K. Choudhury On-line Monitoring of Tool Wear & Control of Dimensional Inaccuracy in Turning Journal of Manufacturing Science Engineering 123 1 2001 10 12
-
(2001)
Journal of Manufacturing Science Engineering
, vol.123
, Issue.1
, pp. 10-12
-
-
Choudhury, S.K.1
-
173
-
-
77955556175
-
Development of an Intelligent Cutter for Face Milling
-
June, Udine
-
F. Klocke, E. Kuljanic, G. Wirtz, G. Totis, D. Veselovac, and M. Sortino Development of an Intelligent Cutter for Face Milling Int. Conf. AMST'08 June, Udine 2008
-
(2008)
Int. Conf. AMST'08
-
-
Klocke, F.1
Kuljanic, E.2
Wirtz, G.3
Totis, G.4
Veselovac, D.5
Sortino, M.6
-
174
-
-
3142781454
-
Dynamic Compensation of Spindle Integrated Force Sensors
-
Y. Altintas, and S. Park Dynamic Compensation of Spindle Integrated Force Sensors CIRP Annals 53 1 2004 305 308
-
(2004)
CIRP Annals
, vol.53
, Issue.1
, pp. 305-308
-
-
Altintas, Y.1
Park, S.2
-
175
-
-
0033704220
-
The Virtual Maintenance System: A Computer-based Support Tool for Robust Design Product Monitoring, Fault Diagnosis and Maintenance Planning
-
F. Van Houten, and F. Kimura The Virtual Maintenance System: A Computer-based Support Tool for Robust Design Product Monitoring, Fault Diagnosis and Maintenance Planning CIRP Annals 49 1 2000 91 94
-
(2000)
CIRP Annals
, vol.49
, Issue.1
, pp. 91-94
-
-
Van Houten, F.1
Kimura, F.2
-
176
-
-
0030716111
-
A Sensor Integrated Tool for Cutting Force Monitoring
-
M. Santochi, G. Dini, G. Tantussi, and M. Beghini A Sensor Integrated Tool for Cutting Force Monitoring CIRP Annals 46 1 1997 49 52
-
(1997)
CIRP Annals
, vol.46
, Issue.1
, pp. 49-52
-
-
Santochi, M.1
Dini, G.2
Tantussi, G.3
Beghini, M.4
-
177
-
-
21944443456
-
Cutting Force Estimation by Measuring Spindle Displacement in Milling Process
-
J.H. Kim, H.K. Chang, D.C. Han, D.Y. Jang, and S.I. Oh Cutting Force Estimation by Measuring Spindle Displacement in Milling Process CIRP Annals 54 1 2005 67 70
-
(2005)
CIRP Annals
, vol.54
, Issue.1
, pp. 67-70
-
-
Kim, J.H.1
Chang, H.K.2
Han, D.C.3
Jang, D.Y.4
Oh, S.I.5
-
178
-
-
0042844587
-
Sensor-less Monitoring of Cutting Force Ultraprecision Machining
-
H. Shinno, and H. Hashizume Sensor-less Monitoring of Cutting Force Ultraprecision Machining CIRP Annals 52 1 2003 303 305
-
(2003)
CIRP Annals
, vol.52
, Issue.1
, pp. 303-305
-
-
Shinno, H.1
Hashizume, H.2
-
179
-
-
77955554995
-
An Adaptive Control of Ultraprecision Machining with an In-process Micro-sensor
-
M. Hayashi, H. Yoshioka, and H. Shinno An Adaptive Control of Ultraprecision Machining with an In-process Micro-sensor Journal of Advanced Mechanical Design Systems, and Manufacturing 2 3 2008 322 331
-
(2008)
Journal of Advanced Mechanical Design Systems, and Manufacturing
, vol.2
, Issue.3
, pp. 322-331
-
-
Hayashi, M.1
Yoshioka, H.2
Shinno, H.3
-
180
-
-
77955553027
-
Status Monitoring of Ultraprecision Machining Using Micro Thermo Sensor and AE Sensor
-
H. Yoshioka, M. Hayashi, and H. Shinno Status Monitoring of Ultraprecision Machining Using Micro Thermo Sensor and AE Sensor International Journal of Automation Technology 3 4 2009 422 427
-
(2009)
International Journal of Automation Technology
, vol.3
, Issue.4
, pp. 422-427
-
-
Yoshioka, H.1
Hayashi, M.2
Shinno, H.3
-
181
-
-
0031331334
-
Intelligent Computing Methods for Manufacturing Systems, STC-O KN Paper
-
R. Teti, and S.R.T. Kumara Intelligent Computing Methods for Manufacturing Systems, STC-O KN Paper CIRP Annals 46 2 1997 629 652
-
(1997)
CIRP Annals
, vol.46
, Issue.2
, pp. 629-652
-
-
Teti, R.1
Kumara, S.R.T.2
-
182
-
-
0003444646
-
Learning Internal Representations by Error in Propagation
-
McClelland, Rumelhart, and the PDP Research Group (Eds.)
-
Rumelhart DE, Hinton GE, Williams RJ (1986) Learning Internal Representations by Error in Propagation, in McClelland, Rumelhart, and the PDP Research Group (Eds.) Parallel Distributed Processing: Exploration in the Microstructures of Cognition, Foundations, vol 1.
-
(1986)
Parallel Distributed Processing: Exploration in the Microstructures of Cognition, Foundations
, vol.1
-
-
Rumelhart, D.E.1
Hinton, G.E.2
Williams, R.J.3
-
185
-
-
0025206332
-
Probabilistic NN
-
D.F. Specht Probabilistic NN Neural Networks 3 1 1990 109 118
-
(1990)
Neural Networks
, vol.3
, Issue.1
, pp. 109-118
-
-
Specht, D.F.1
-
186
-
-
33847649288
-
Training Recurrent Networks by Evolino
-
J. Schmidhuber, D. Wierstra, M. Gagliolo, and F. Gomez Training Recurrent Networks by Evolino Neural Computation 19 3 2007 757 779
-
(2007)
Neural Computation
, vol.19
, Issue.3
, pp. 757-779
-
-
Schmidhuber, J.1
Wierstra, D.2
Gagliolo, M.3
Gomez, F.4
-
188
-
-
0029375851
-
Gradient Calculations for Dynamic Recurrent Neural Networks: A Survey
-
B.A. Pearlmutter Gradient Calculations for Dynamic Recurrent Neural Networks: A Survey IEEE Transactions on NNs 6 5 1995 1212 1228
-
(1995)
IEEE Transactions on NNs
, vol.6
, Issue.5
, pp. 1212-1228
-
-
Pearlmutter, B.A.1
-
190
-
-
33947602485
-
NNs in Designing Fuzzy Systems for Real World Applications
-
S.K. Halgamuge, and M. Glesner NNs in Designing Fuzzy Systems for Real World Applications Fuzzy Sets and Systems 65 1984 1 12
-
(1984)
Fuzzy Sets and Systems
, vol.65
, pp. 1-12
-
-
Halgamuge, S.K.1
Glesner, M.2
-
192
-
-
33746345630
-
Approach into the Use of Probabilistic Neural Networks for Automated Classification of Tool Malfunctions in Broaching
-
D. Axinte Approach into the Use of Probabilistic Neural Networks for Automated Classification of Tool Malfunctions in Broaching International Journal of Machine Tools and Manufacture 46 12-13 2006 1445 1448
-
(2006)
International Journal of Machine Tools and Manufacture
, vol.46
, Issue.12-13
, pp. 1445-1448
-
-
Axinte, D.1
-
194
-
-
0012224147
-
On-line Tool Wear Monitoring Using a Kohonen's Feature Map
-
St. Louis, MO, November 10-13, 1
-
S.V. Kamarthi, G.S. Sankar, P.H. Cohen, and S.R.T. Kumara On-line Tool Wear Monitoring Using a Kohonen's Feature Map Int. Conf. on ANNIE'91 St. Louis, MO, November 10-13, 1 1991 639 644
-
(1991)
Int. Conf. on ANNIE'91
, pp. 639-644
-
-
Kamarthi, S.V.1
Sankar, G.S.2
Cohen, P.H.3
Kumara, S.R.T.4
-
197
-
-
0036777279
-
Neighborhood Method and Its Coupling with the Wavelet Method for Nonlinear Signal Separation of Contaminated Chaotic Time-series Data
-
S.T.S. Bukkapatnam, S.R.T. Kumara, A. Lakhtakia, and P. Srinivasan Neighborhood Method and Its Coupling with the Wavelet Method for Nonlinear Signal Separation of Contaminated Chaotic Time-series Data Signal Processing 82 10 2002 1351 1374
-
(2002)
Signal Processing
, vol.82
, Issue.10
, pp. 1351-1374
-
-
Bukkapatnam, S.T.S.1
Kumara, S.R.T.2
Lakhtakia, A.3
Srinivasan, P.4
-
199
-
-
0036686951
-
Chip Disposal State Monitoring in Drilling Using Neural Network Based Spindle Motor Power Sensing
-
H.Y. Kim, and J.H. Ahn Chip Disposal State Monitoring in Drilling Using Neural Network Based Spindle Motor Power Sensing International Journal of Machine Tools and Manufacture 42 10 2002 1113 1119
-
(2002)
International Journal of Machine Tools and Manufacture
, vol.42
, Issue.10
, pp. 1113-1119
-
-
Kim, H.Y.1
Ahn, J.H.2
-
200
-
-
77955551473
-
Analysis of Sound Signal Generation Due to Flank Wear in Turning
-
Orlando
-
M.C. Lu, and Kannatey-Asibu Jr.E. Analysis of Sound Signal Generation Due to Flank Wear in Turning Int ME Congr & Exp Orlando 2000
-
(2000)
Int ME Congr & Exp
-
-
Lu, M.C.1
Kannatey-Asibu, Jr.E.2
-
202
-
-
0016368711
-
Application of Fuzzy Algorithms for Control of Simple Dynamic Plant
-
E.H. Mamdani Application of Fuzzy Algorithms for Control of Simple Dynamic Plant Proc. IEEE 121 12 1974 1585 1588
-
(1974)
Proc. IEEE
, vol.121
, Issue.12
, pp. 1585-1588
-
-
Mamdani, E.H.1
-
204
-
-
77955557510
-
Fuzzy Logic Approach to Sensor Monitoring during Machining
-
Naples, 21-22 September
-
Teti R Fuzzy Logic Approach to Sensor Monitoring during Machining WILF 95 Naples, 21-22 September 1995 189 199
-
(1995)
WILF 95
, pp. 189-199
-
-
Teti, R.1
-
205
-
-
77955554792
-
Tool Wear State Identification by Fuzzy Logic Processing of Fused Sensor Data
-
Capri, 1-3 July
-
R. Teti, and A. Manzoni Tool Wear State Identification by Fuzzy Logic Processing of Fused Sensor Data 1st CIRP Int. Sem. on ICME Capri, 1-3 July 1998 687 691
-
(1998)
1st CIRP Int. Sem. on ICME
, pp. 687-691
-
-
Teti, R.1
Manzoni, A.2
-
207
-
-
77955550483
-
Genetic Algorithm for Line Extraction, Rapport Technique EPM/RT-98/06
-
L. Baron Genetic Algorithm for Line Extraction, Rapport Technique EPM/RT-98/06 Ecole Polytechnique Montreal 1998
-
(1998)
Ecole Polytechnique Montreal
-
-
Baron, L.1
-
210
-
-
0036625566
-
Tool Wear Monitoring Using Genetically-generated, Fuzzy Knowledge Bases
-
S. Achichea, M. Balazinski, L. Baron, and K. Jemielniak Tool Wear Monitoring Using Genetically-generated, Fuzzy Knowledge Bases Engineering Applications of Artificial Intelligence 15 2002 303 314
-
(2002)
Engineering Applications of Artificial Intelligence
, vol.15
, pp. 303-314
-
-
Achichea, S.1
Balazinski, M.2
Baron, L.3
Jemielniak, K.4
-
211
-
-
0033104456
-
Multi-sensor Integration for On-line Tool Wear Estimation through Radial Basis Function Networks and Fuzzy Neural Network
-
R.J. Kuo, and P.H. Cohen Multi-sensor Integration for On-line Tool Wear Estimation through Radial Basis Function Networks and Fuzzy Neural Network Neural Networks 12 2 1999 355 370
-
(1999)
Neural Networks
, vol.12
, Issue.2
, pp. 355-370
-
-
Kuo, R.J.1
Cohen, P.H.2
-
215
-
-
77955554857
-
Sensor Fusion of Sensor Signals during Machining of Difficult-to-machine Metal Alloys
-
Torino, 7-9 September
-
T. Segreto, and R. Neugebauer Sensor Fusion of Sensor Signals during Machining of Difficult-to-machine Metal Alloys AITeM 2009 Torino, 7-9 September 2009 199
-
(2009)
AITeM 2009
, pp. 199
-
-
Segreto, T.1
Neugebauer, R.2
-
216
-
-
77955552469
-
Sensor Monitoring for Cutting Process Optimisation of Low Machinability Materials
-
Chemnitz, 21-22 October
-
R. Teti, and T. Segreto Sensor Monitoring for Cutting Process Optimisation of Low Machinability Materials 5th Chemnitz Colloq. on Prod. Techn.-CPK Chemnitz, 21-22 October 2008 237 256
-
(2008)
5th Chemnitz Colloq. on Prod. Techn.-CPK
, pp. 237-256
-
-
Teti, R.1
Segreto, T.2
-
217
-
-
77955551661
-
Sensor Fusion of Acoustic Emission and Cutting Force for Tool Wear Monitoring during Composite Materials Machining
-
Naples, 23-25 July
-
T. Segreto, and R. Teti Sensor Fusion of Acoustic Emission and Cutting Force for Tool Wear Monitoring during Composite Materials Machining 6th CIRP Int. Conf. on ICME Naples, 23-25 July 2008 221 226
-
(2008)
6th CIRP Int. Conf. on ICME
, pp. 221-226
-
-
Segreto, T.1
Teti, R.2
-
219
-
-
77955557918
-
Process Acceptability in Turning of Ti alloys Based on Cutting Force Sensor Monitoring
-
Dublin, 12-13 June
-
R. Teti, T. Segreto, R. Neugebauer, and C. Harzbecker Process Acceptability in Turning of Ti alloys Based on Cutting Force Sensor Monitoring 3rd Int. Conf. High Perf. Cutt Dublin, 12-13 June 2008 241 250
-
(2008)
3rd Int. Conf. High Perf. Cutt
, pp. 241-250
-
-
Teti, R.1
Segreto, T.2
Neugebauer, R.3
Harzbecker, C.4
-
222
-
-
33750082596
-
Round Robin on AE Monitoring of Machining
-
R. Teti, and P. Buonadonna Round Robin on AE Monitoring of Machining Annals of the CIRP 48 3 1999 47 69
-
(1999)
Annals of the CIRP
, vol.48
, Issue.3
, pp. 47-69
-
-
Teti, R.1
Buonadonna, P.2
-
225
-
-
77955560635
-
Machinability Assessment in Turning of NiTi Through Acceleration Sensor Monitoring
-
Ischia, 22-24 July
-
T. Segreto, R. Teti, R. Neugebauer, and G. Schmidt Machinability Assessment in Turning of NiTi Through Acceleration Sensor Monitoring 2nd Int. Researchers Symp. on IPROMS Ischia, 22-24 July 2009 75 80
-
(2009)
2nd Int. Researchers Symp. on IPROMS
, pp. 75-80
-
-
Segreto, T.1
Teti, R.2
Neugebauer, R.3
Schmidt, G.4
-
226
-
-
77955552200
-
Vibration Signal Detection and Conditioning for Machinability Analysis of Ti alloy Turning
-
Ischia, 22-24 July
-
A. Teti, T. Segreto, R. Neugebauer, and G. Schmidt Vibration Signal Detection and Conditioning for Machinability Analysis of Ti alloy Turning 2nd Int. Resear. Symp. on IPROMS Ischia, 22-24 July 2009 93 96
-
(2009)
2nd Int. Resear. Symp. on IPROMS
, pp. 93-96
-
-
Teti, A.1
Segreto, T.2
Neugebauer, R.3
Schmidt, G.4
-
227
-
-
34848916718
-
Sensor Fusion for On-line Tool Condition Monitoring in Milling
-
W. Wang, G. Hong, Y. Wong, and K. Zhu Sensor Fusion for On-line Tool Condition Monitoring in Milling International Journal of Production Research 45 21 2007 5095 5116
-
(2007)
International Journal of Production Research
, vol.45
, Issue.21
, pp. 5095-5116
-
-
Wang, W.1
Hong, G.2
Wong, Y.3
Zhu, K.4
-
228
-
-
40649119235
-
Recent Advances in Mechanical Micromachining
-
D. Dornfeld, S. Min, and Y. Takeuchi Recent Advances in Mechanical Micromachining CIRP Annals 55 2 2006 745 768
-
(2006)
CIRP Annals
, vol.55
, Issue.2
, pp. 745-768
-
-
Dornfeld, D.1
Min, S.2
Takeuchi, Y.3
-
229
-
-
43649091372
-
A Study on Initial Contact Detection for Precision Micro-mold & Surface Generation of Vertical Side Walls Micro-machining
-
S. Min, H. Sangermann, C. Mertens, and D. Dornfeld A Study on Initial Contact Detection for Precision Micro-mold & Surface Generation of Vertical Side Walls Micro-machining CIRP Annals 57 1 2008 109 112
-
(2008)
CIRP Annals
, vol.57
, Issue.1
, pp. 109-112
-
-
Min, S.1
Sangermann, H.2
Mertens, C.3
Dornfeld, D.4
-
231
-
-
77955553954
-
Improving Machine Tool Interoperability Using Standardized Interface Protocols: MTConnect
-
ASME, Atlanta, GA, June 23-26
-
A. Vijayaraghavan, W. Sobel, A. Fox, D. Dornfeld, and P. Warndorf Improving Machine Tool Interoperability Using Standardized Interface Protocols: MTConnect Int. Symposium on Flexible Automation ASME, Atlanta, GA, June 23-26 2008
-
(2008)
Int. Symposium on Flexible Automation
-
-
Vijayaraghavan, A.1
Sobel, W.2
Fox, A.3
Dornfeld, D.4
Warndorf, P.5
-
233
-
-
77955553395
-
Process Planning and Verification with MTConnect
-
A. Vijayaraghavan, L. Huet, D. Dornfeld, W. Sobel, B. Blomquist, and M. Conley Process Planning and Verification with MTConnect Transactions on NAMRI/SMI 2009 37
-
(2009)
Transactions on NAMRI/SMI
, pp. 37
-
-
Vijayaraghavan, A.1
Huet, L.2
Dornfeld, D.3
Sobel, W.4
Blomquist, B.5
Conley, M.6
-
234
-
-
77955555340
-
-
accessed 10.15.08
-
Seiki M (2008) http://www.moriseiki.com/ (accessed 10.15.08).
-
(2008)
-
-
Seiki, M.1
-
235
-
-
77955549818
-
-
Mazak accessed 10.15.08
-
Mazak (2008) http://www.mazakusa.com/ (accessed 10.15.08).
-
(2008)
-
-
-
237
-
-
77955553583
-
-
EC FP7 CP 213855Adaptive Control of Manufacturing Processes for a New Generation of Jet Engines-ACCENT (2008-11)
-
EC FP7 CP 213855Adaptive Control of Manufacturing Processes for a New Generation of Jet Engines-ACCENT (2008-11).
-
-
-
-
238
-
-
27644570311
-
Precision Manufacturing Process Monitoring with Acoustic Emission
-
D.E. Lee, I. Hwang, C.M.O. Valente, J.F.G. Oliveira, and D.A. Dornfeld Precision Manufacturing Process Monitoring with Acoustic Emission International Journal of Machine Tools and Manufacture 46 2006 176 188
-
(2006)
International Journal of Machine Tools and Manufacture
, vol.46
, pp. 176-188
-
-
Lee, D.E.1
Hwang, I.2
Valente, C.M.O.3
Oliveira, J.F.G.4
Dornfeld, D.A.5
-
240
-
-
77955556234
-
-
EC FP7 NoE on I*PROMS
-
EC FP7 NoE on I*PROMS: http://www.iproms.org.
-
-
-
|