메뉴 건너뛰기




Volumn 36, Issue , 2008, Pages 445-452

Achieving machining residual stresses through model-driven planning of process parameters

Author keywords

Inverse method; Residual stress; Shear zone characteristics

Indexed keywords

INDUSTRIAL RESEARCH; MACHINING; PARAMETER ESTIMATION; RELIABILITY; RESEARCH; RESIDUAL STRESSES; SOCIETIES AND INSTITUTIONS; STRENGTH OF MATERIALS;

EID: 52349124586     PISSN: 10473025     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper
Times cited : (6)

References (25)
  • 1
    • 0031186488 scopus 로고    scopus 로고
    • On tool-chip interface stress distributions, ploughing force and size effect in machining
    • Arsecularatne, J.A. (1997). "On tool-chip interface stress distributions, ploughing force and size effect in machining." International Journal of Machine Tools & Manufacture, 37(7), pp. 885-899.
    • (1997) International Journal of Machine Tools & Manufacture , vol.37 , Issue.7 , pp. 885-899
    • Arsecularatne, J.A.1
  • 2
    • 0017517972 scopus 로고
    • Transition from ploughing to cutting during machining with blunt tools
    • Basuray, P.K., B.K. Misra, and G.K. Lal (1977). "Transition from ploughing to cutting during machining with blunt tools." Wear, 43, pp. 341-349.
    • (1977) Wear , vol.43 , pp. 341-349
    • Basuray, P.K.1    Misra, B.K.2    Lal, G.K.3
  • 4
    • 0036640044 scopus 로고    scopus 로고
    • A method of modeling residual stress distribution in turning for different materials
    • El-Axir, M.H. (2002). "A method of modeling residual stress distribution in turning for different materials." International Journal of Machine Tools and Manufacture, 42(9), pp. 1055-1063.
    • (2002) International Journal of Machine Tools and Manufacture , vol.42 , Issue.9 , pp. 1055-1063
    • El-Axir, M.H.1
  • 5
    • 0029292801 scopus 로고
    • Residual-stress model for the milling of aluminum alloy (2014-T6)
    • Fuh, K.-H. and C.-F. Wu (1995). "Residual-stress model for the milling of aluminum alloy (2014-T6)." Journal of Materials Processing Technology, 51(1-4), pp. 87-105.
    • (1995) Journal of Materials Processing Technology , vol.51 , Issue.1-4 , pp. 87-105
    • Fuh, K.-H.1    Wu, C.-F.2
  • 6
    • 0011011142 scopus 로고    scopus 로고
    • Residual stress formation mechanism and its control by sequential cuts
    • Guo, Y. B. and C. R. Liu, (2000). "Residual stress formation mechanism and its control by sequential cuts." Transactions of NAMRI/SME, Vol. 28, pp. 179-184
    • (2000) Transactions of NAMRI/SME , vol.28 , pp. 179-184
    • Guo, Y.B.1    Liu, C.R.2
  • 8
    • 17844378475 scopus 로고    scopus 로고
    • Effect of feed rate, workpiece hardness and cutting edge on subsurface residual stress in the hard turning of bearing steel using chamfer + hone cutting edge geometry
    • Hua, J., et al. (2005). "Effect of feed rate, workpiece hardness and cutting edge on subsurface residual stress in the hard turning of bearing steel using chamfer + hone cutting edge geometry." Materials Science and Engineering A 394(1-2), pp. 238-248.
    • (2005) Materials Science and Engineering A , vol.394 , Issue.1-2 , pp. 238-248
    • Hua, J.1
  • 9
    • 37349034365 scopus 로고    scopus 로고
    • Modeling of the in-plane biaxial residual stresses from machining
    • Ph.D. Dissertation, University of Illinois: Urbana-Champaign, p
    • Jacobus, J.K. (1999). "Modeling of the in-plane biaxial residual stresses from machining." Ph.D. Dissertation, University of Illinois: Urbana-Champaign, p. 174.
    • (1999) , pp. 174
    • Jacobus, J.K.1
  • 11
    • 0028462044 scopus 로고
    • Analytical approach to elastic-plastic stress analysis of rolling contact
    • Jiang, Y. and H. Sehitoglu (1994). "Analytical approach to elastic-plastic stress analysis of rolling contact." Journal of Tribology, Transactions of the ASME, 116(3), pp. 577-587.
    • (1994) Journal of Tribology, Transactions of the ASME , vol.116 , Issue.3 , pp. 577-587
    • Jiang, Y.1    Sehitoglu, H.2
  • 13
    • 0001399249 scopus 로고    scopus 로고
    • A new model and analysis of orthogonal machining with an edge-radiused tool
    • Manjunathaiah, J. and Endres, W. J. (2000) "A new model and analysis of orthogonal machining with an edge-radiused tool." Journal of Manufacturing Science and Engineering, 122(3), pp. 384-390.
    • (2000) Journal of Manufacturing Science and Engineering , vol.122 , Issue.3 , pp. 384-390
    • Manjunathaiah, J.1    Endres, W.J.2
  • 14
    • 0031277757 scopus 로고    scopus 로고
    • Approximate algorithm for elastic-plastic two-dimensional rolling/sliding contact
    • McDowell, D.L. (1997). "Approximate algorithm for elastic-plastic two-dimensional rolling/sliding contact." Wear, 211(2), pp. 237-246.
    • (1997) Wear , vol.211 , Issue.2 , pp. 237-246
    • McDowell, D.L.1
  • 17
    • 0033225559 scopus 로고    scopus 로고
    • Residual stress analysis in orthogonal machining of standard and resulfurized AISI 316L steels
    • M'Soubi, R., et al. (1999). "Residual stress analysis in orthogonal machining of standard and resulfurized AISI 316L steels." Journal of Materials Processing Technology, 96(1-3), pp. 225-233.
    • (1999) Journal of Materials Processing Technology , vol.96 , Issue.1-3 , pp. 225-233
    • M'Soubi, R.1
  • 18
    • 0015200025 scopus 로고
    • Residual stress produced by metal cutting
    • Okushima, K. and Y. Kakino (1971). "Residual stress produced by metal cutting." CIRP Annals, 20(1), pp. 13-14.
    • (1971) CIRP Annals , vol.20 , Issue.1 , pp. 13-14
    • Okushima, K.1    Kakino, Y.2
  • 19
    • 85033529988 scopus 로고
    • Stresses due to tangential and normal loads on an elastic solid with applications to some contact stress problems
    • Smith, J.O. and C.K. Liu (1953). "Stresses due to tangential and normal loads on an elastic solid with applications to some contact stress problems." ASME Journal of Applied Mechanics, pp. 157-165.
    • (1953) ASME Journal of Applied Mechanics , pp. 157-165
    • Smith, J.O.1    Liu, C.K.2
  • 20
    • 73249118474 scopus 로고    scopus 로고
    • Liang, S. Y. and J.-C. (2007). Residual stress modeling in orthogonal machining, Annals of International Institution for Production Engineering Research (CIRP), 56/1, pp. 65-68
    • Liang, S. Y. and J.-C. (2007). "Residual stress modeling in orthogonal machining," Annals of International Institution for Production Engineering Research (CIRP), Vol. 56/1, pp. 65-68
  • 21
    • 0016470817 scopus 로고
    • Study on the residual stress distributions by turning
    • Tsuchida, K., Y. Kawada, and S. Kodama (1975). "Study on the residual stress distributions by turning." CIRP Annals, 18(116), pp. 123-130.
    • (1975) CIRP Annals , vol.18 , Issue.116 , pp. 123-130
    • Tsuchida, K.1    Kawada, Y.2    Kodama, S.3
  • 23
    • 10044286131 scopus 로고    scopus 로고
    • A simplified model for ploughing forces in turning
    • Waldorf, D.J. (2004). "A simplified model for ploughing forces in turning." Transactions of NAMRI/SME, Vol. 32, pp. 447-454.
    • (2004) Transactions of NAMRI/SME , vol.32 , pp. 447-454
    • Waldorf, D.J.1
  • 24
    • 33748688872 scopus 로고    scopus 로고
    • On the clarification of surface hardening by hard turning and grinding
    • Warren A. W., Guo, Y. B., and Tuscaloosa, A., (2006). "On the clarification of surface hardening by hard turning and grinding," Transactions of NAMRI/SME, pp. 309-316
    • (2006) Transactions of NAMRI/SME , pp. 309-316
    • Warren, A.W.1    Guo, Y.B.2    Tuscaloosa, A.3
  • 25
    • 0025477867 scopus 로고
    • Effect of hardness on residual stresses in orthogonal machining of AISI 4340 steel
    • Wu, D.W. and Y. Matsumoto (1990). "Effect of hardness on residual stresses in orthogonal machining of AISI 4340 steel." Journal of Engineering for Industry, Transactions of the ASME, 112(3), pp. 245-252.
    • (1990) Journal of Engineering for Industry, Transactions of the ASME , vol.112 , Issue.3 , pp. 245-252
    • Wu, D.W.1    Matsumoto, Y.2


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.