Railway Noise and Vibration

Railway Noise and Vibration

Volumn , Issue , 2009, Pages

  Thompson, David ^a  

^a UNIVERSITY OF SOUTHAMPTON   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

NOISE POLLUTION; RAILROADS; RAILS;

ACADEMIC RESEARCH; CONTROL TECHNIQUES; NOISE AND VIBRATION; NOISE CONTROL TECHNOLOGY; NOISE PROBLEMS; PRACTICAL PROBLEMS; RAILWAY NETWORK; RAILWAY NOISE;

RAILROAD TRANSPORTATION;

EID: 85052417402     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-0-08-045147-3.X0023-0     Document Type: Book

References (523)

1. Siddall W.R. No nook secure: transportation and environmental quality. Comparative Studies in Society and History 1974, 16:2-23.
2. Anon, Haddon Tunnel, Wikipedia, (accessed 22/3/07). http://en.wikipedia.org/wiki/Haddon_Tunnel.
3. Wilson A.H., et al. Committee on the problem of noise - final report, Cmnd 2056 1963, HMSO, London.
4. Future Noise Policy, European Commission Green Paper, COM(96) 540 final, Brussels, 4 November 1996.
5. Moehler U., Liepert M., Schuemer R., Griefahn B. Differences between railway and road traffic noise. Journal of Sound and Vibration 2000, 231:853-864.
6. Krüger F., et al. Schall- und Erschütterungsschutz im Schienenverkehr 2001, Expert Verlag, Renningen.
7. U. Sandberg. Noise emission of road vehicles - effect of regulations. Final report, I-INCE, 2001.
8. Commission Decision 2002/735/EC concerning the Technical Specification for Interoperability (TSI) relating to the rolling stock subsystem of the trans-European high-speed rail system. Official Journal of the European Communities 2002, L245:402-506.
9. Directive 2001/16/EC of the European Parliament and of the Council of 19 March 2001 on the interoperability of the trans-European conventional rail system. Official Journal of the European Communities 2001, L110:1-27.
10. Directive 2002/49/EC of the European Parliament and of the Council of 25 June 2002 relating to the assessment and management of environmental noise. Official Journal of the European Communities 2002, L189:12-25.
11. Fundamentals of Noise and Vibration 1998, E&FN Spon, London. F.J. Fahy, J.G. Walker (Eds.).
12. Kinsler L.E., Frey A.R., Coppens A.B., Sanders J.V. Fundamentals of Acoustics 1999, John Wiley & Sons, New York. 4th edition.
13. Rao S.S. Mechanical Vibrations 2003, Prentice Hall, Upper Saddle River, NJ. 4th edition.
14. L. Meister and H. Saurenman. Noise impacts from train whistles at highway/rail at-grade crossings. Proceedings of Internoise 2000, Nice, France, 1038-1043, 2000.
15. Remington P.J. Wheel/rail rolling noise: what do we know? What don't we know? Where do we go from here?. Journal of Sound and Vibration 1988, 120:203-226.
16. Thompson D.J. Predictions of the acoustic radiation from vibrating wheels and rails. Journal of Sound and Vibration 1988, 120:275-280.
17. Thompson D.J., Remington P.J. The effects of transverse profile on the excitation of wheel/rail noise. Journal of Sound and Vibration 2000, 231:537-548.
18. Hemsworth B. Railway noise prediction - data base requirements. Journal of Sound and Vibration 1983, 87:275-283.
19. E. Verheijen. Geluidemissie van de spoormaterieelcategorieën, dBvision report PRO020-01-16 produced for ProRail, February 2007.
20. Hemsworth B. Recent developments in wheel/rail noise research. Journal of Sound and Vibration 1979, 66:297-310.
21. Wettschureck R., Hauck G. Geräusche und Erschütterungen aus dem Schienenverkehr, Chapter 16. Taschenbuch der Technischen Akustik 1994, Springer Verlag, Berlin. 2nd edition. M. Heckl, H.A. Müller (Eds.).
22. W.F. King, III. The components of wayside noise generated by high-speed tracked vehicles. Proceedings of Inter Noise 90, Gothenburg, Sweden, 375-378, 1990.
23. B. Mauclaire. Noise generated by high speed trains. New information acquired by SNCF in the field of acoustics owing to the high speed test programme. Proceedings Inter Noise 90, Gothenburg, Sweden, 371-374, 1990.
24. O.R.E. Wheel/rail contact noise - comparative study between theoretical model and measured results. Question C163, Railway Noise, Report RP7, Utrecht, 1986.
25. O.R.E. Wheel/rail contact noise - an experimental comparison of various systems for measuring the rail roughness associated with train rolling noise. Question C163, Railway Noise, Report RP9, Utrecht, 1988.
26. L. Grassie and J. Kalousek. Rail corrugation: characteristics, causes and treatments. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 207F, 57-68, 1993.
27. Grassie S.L. Rail corrugation: advances in measurement, understanding and treatment. Wear 2005, 258:1224-1234.
28. Nielsen J.C.O., Lundén R., Johansson A., Vernersson T. Train-track interaction and mechanisms of irregular wear on wheel and rail surfaces. Vehicle System Dynamics 2003, 40:3-54.
29. Jacobson B., Kalker J.J. Rolling Contact Phenomena 2000, Springer Verlag, Berlin.
30. Thompson D.J. On the relationship between wheel and rail surface roughness and rolling noise. Journal of Sound and Vibration 1996, 193:149-160.
31. Thompson D.J., Remington P.J. The effects of transverse profile on the excitation of wheel/rail noise. Journal of Sound and Vibration 2000, 231:537-548.
32. P. Vinson and P. Pinconnat. TGV-Duplex à 350km/h, bruit rayonné dans l'environnement au passage en champ libre, derrière Merlon et Écran. SNCF report AEF-D R03030/02D-127, 2003.
33. Bender E.K., Remington P.J. The influence of rails on train noise. Journal of Sound and Vibration 1974, 37:321-334.
34. Peters S., Hemsworth B., Woodward B. Noise radiation by a railway rail. Journal of Sound and Vibration 1974, 35:146-150.
35. Thompson D.J. Predictions of acoustic radiation from vibrating wheels and rails. Journal of Sound and Vibration 1988, 120:275-380.
36. D.J. Thompson. Theoretical modelling of wheel-rail noise generation. Proceedings of the Institution of Mechanical Engineers. Journal of Rail and Rapid Transit, 205F, 137-149, 1991.
37. Remington P.J. Wheel/rail rolling noise, I: Theoretical analysis. Journal of the Acoustical Society of America 1987, 81:1805-1823.
38. Remington P.J. Wheel/rail rolling noise, II: Validation of the theory. Journal of the Acoustical Society of America 1987, 81:1824-1832.
39. Thompson D.J., Fodiman P., Mahé H. Experimental validation of the TWINS prediction program, Part 2: results. Journal of Sound and Vibration 1996, 193:137-147.
40. Bariskow B., King W.F., Pfizenmaier E. Wheel/rail noise generated by a high speed train investigated by a line array of microphones. Journal of Sound and Vibration 1987, 118:99-122.
41. Kitagawa T., Thompson D.J. Comparison of wheel/rail noise radiation on Japanese railways using the TWINS model and microphone array measurements. Journal of Sound and Vibration 2006, 293:496-509.
42. D.J. Thompson. Wheel-rail noise: theoretical modelling of the generation of vibrations. PhD thesis, University of Southampton, 1990.
43. Thompson D.J. Wheel-rail noise generation, Part I: Introduction and interaction model. Journal of Sound and Vibration 1993, 161:387-400.
44. Thompson D.J. Wheel-rail noise generation, Part II: Wheel vibration. Journal of Sound and Vibration 1993, 161:401-419.
45. Thompson D.J. Wheel-rail noise generation, Part III: Rail vibration. Journal of Sound and Vibration 1993, 161:421-446.
46. Thompson D.J. Wheel-rail noise generation, Part IV: Contact zone and results. Journal of Sound and Vibration 1993, 161:447-466.
47. Thompson D.J. Wheel-rail noise generation, Part V: Inclusion of wheel rotation. Journal of Sound and Vibration 1993, 161:467-482.
48. Thompson D.J., Hemsworth B., Vincent N. Experimental validation of the TWINS prediction program, Part 1: Method. Journal of Sound and Vibration 1996, 193:123-135.
49. Esveld C. Modern Railway Track 2001, MRT Productions, Zaltbommel. 2nd edition.
50. Vincent N., Thompson D.J. Track dynamic behaviour at high frequencies. Part 2: experimental results and comparisons with theory. Vehicle System Dynamics Supplement 1995, 24:100-114.
51. Jones C.J.C., Thompson D.J., Diehl R.J. The use of decay rates to analyse the performance of railway track in rolling noise generation. Journal of Sound and Vibration 2006, 293:485-495.
52. Janssens M.H.A., Dittrich M.G., de Beer F.G., Jones C.J.C. Railway noise measurement method for pass-by noise, total effective roughness, transfer functions and track spatial decay rates. Journal of Sound and Vibration 2006, 293:1007-1028.
53. Brennan M.J., Ferguson N.S. Vibration control, Chapter 12. Advanced Applications of Acoustics, Noise and Vibration 2004, E&FN Spon, London. F. Fahy, J. Walker (Eds.).
54. D.J. Thompson, C.J.C. Jones, T.X. Wu and G. de France. The influence of the non-linear stiffness behaviour of railpads on the track component of rolling noise. Proceedings of the Institution of Mechanical Engineers, Part F (Journal of Rail and Rapid Transit), 213, 233-241, 1999.
55. Knothe K., Grassie S.L. Modelling of railway track and vehicle/track interaction at high frequencies. Vehicle System Dynamics 1993, 22:209-262.
56. Graff K.F. Wave Motion in Elastic Solids 1991, Dover Publications, New York.
57. Cremer L., Heckl M., Ungar E.E. Structure-borne Sound 1988, Springer. 2nd edition.
58. H. Priestley. Introduction to Complex Analysis. Oxford University Press, 2nd edition, 2003.
59. L. Fryba. Vibration of Solids and Structures Under Moving Loads. Thomas Telford, 3rd edition, 1999.
60. Grassie S.L., Gregory R.W., Harrison D., Johnson K.L. The dynamic response of railway track to high frequency vertical excitation. Journal of Mechanical Engineering Science 1982, 24:77-90.
61. Heckl M.A. Railway noise - can random sleeper spacings help?. Acustica 1995, 81:559-564.
62. Heckl M.A. Coupled waves on a periodically supported Timoshenko beam. Journal of Sound and Vibration 2002, 252:849-882.
63. D.J. Thompson, M.H.A. Janssens and F.G. de Beer. TWINS: Track-Wheel Interaction Noise Software, theoretical manual (version 3.0), TNO report HAG-RPT-990211, 1999.
64. Thompson D.J., Vincent N. Track dynamic behaviour at high frequencies. Part 1: theoretical models and laboratory measurements. Vehicle System Dynamics Supplement 1995, 24:86-99.
65. Mead D.J. Wave propagation and natural modes in periodic systems: I. Mono-coupled systems. Journal of Sound and Vibration 1975, 40:1-18.
66. de France G. Railway track: effect of rail support stiffness on vibration and noise. MSc Dissertation, ISVR 1998, University of Southampton.
67. Oscarsson J. Dynamic train-track interaction: variability attributable to scatter in the track properties. Vehicle System Dynamics 2002, 37:59-79.
68. T.X. Wu and D.J. Thompson. The influence of random sleeper spacing and ballast stiffness on the vibration behaviour of railway track. Acustica united with Acta Acustica, 86, 313-321, 2000.
69. Thompson D.J. Experimental analysis of wave propagation in railway tracks. Journal of Sound and Vibration 1997, 203:867-888.
70. Gavric L. Computation of propagative waves in free rail using a finite element technique. Journal of Sound and Vibration 1995, 185:531-543.
71. Nilsson C-M. Waveguide finite elements applied on a car tyre. PhD thesis 2004, KTH, Stockholm.
72. Sheng X., Jones C.J.C., Thompson D.J. Responses of infinite periodic structures to moving or stationary harmonic loads. Journal of Sound and Vibration 2005, 282:125-149.
73. Thompson D.J. Wheel-rail noise generation, Part III: rail vibration. Journal of Sound and Vibration 1993, 161:421-446.
74. Wu T.X., Thompson D.J. A double Timoshenko beam model for vertical vibration analysis of railway track at high frequencies. Journal of Sound and Vibration 1999, 224:329-348.
75. Wu T.X., Thompson D.J. Analysis of lateral vibration behavior of railway track at high frequencies using a continuously supported multiple beam model. Journal of the Acoustical Society of America 1999, 106:1369-1376.
76. Wu T.X., Thompson D.J. Application of a multiple-beam model for lateral vibration analysis of a discretely supported rail at high frequencies. Journal of the Acoustical Society of America 2000, 108:1341-1344.
77. Grassie S.L. Dynamic modelling of concrete railway sleepers. Journal of Sound and Vibration 1995, 187:799-813.
78. M.H.A. Janssens and D.J. Thompson. Improvements of ballast and sleeper description in TWINS. Step 2: development and implementation of theoretical models. TNO report TPD-HAG-RPT-960108, 1996.
79. A.M. David and D.J. Thompson. Measurements of the vibration and sound radiation of a concrete railway sleeper. ISVR Contract Report 98/22, September 1998.
80. N. Frémion, J.P. Goudard and N. Vincent. Improvements of ballast and sleeper description in TWINS. Step 1: experimental characterization of ballast properties. Vibratec report 072.028a, July 1996.
81. Thompson D.J., Verheiij J.W. The dynamic behaviour of rail fasteners at high frequencies. Applied Acoustics 1997, 52:1-17.
82. Thompson D.J., van Vliet W.J., Verheiij J.W. Developments of the indirect method for measuring the high frequency dynamic stiffness of resilient elements. Journal of Sound and Vibration 1998, 213:169-188.
83. Remington P.J. Wheel/rail rolling noise, I: Theoretical analysis. Journal of the Acoustical Society of America 1987, 81:1805-1823.
84. Irretier H. The natural and forced vibrations of a wheel disc. Journal of Sound and Vibration 1983, 87:161-177.
85. Thompson D.J. Wheel-rail noise generation, Part II: Wheel vibration. Journal of Sound and Vibration 1993, 161:401-419.
86. Thompson D.J., Dittrich M.G. Wheel response and radiation - laboratory measurements of five types of wheel and comparisons with theory. ORE Technical Document DT248 (C163). Utrecht June 1991.
87. Petyt M. Introduction to Finite Element Vibration Analysis 1990, Cambridge University Press, Cambridge.
88. Rao S.S. Mechanical Vibrations 2003, Prentice Hall, Upper Saddle River, NJ. 4th edition.
89. Ewins D.J. Modal Testing: Theory and Practice 1984, Research Studies Press, Letchworth.
90. Jones C.J.C., Thompson D.J. Extended validation of a theoretical model for railway rolling noise using novel wheel and track designs. Journal of Sound and Vibration 2003, 267:509-522.
91. Newland D.E. An Introduction to Random Vibrations and Spectral Analysis 1975, Longman, London.
92. Remington P.J. Wheel/rail noise - Part 1: Characterization of the wheel/rail dynamic system. Journal of Sound and Vibration 1976, 46:359-379.
93. D. Boennen and S.J. Walsh. Investigation of analytical beam and annular plate models for automotive disc brake vibration. IMechE Braking Conference, Leeds, 2006.
94. Thompson D.J. Wheel-rail noise generation, Part V: Inclusion of wheel rotation. Journal of Sound and Vibration 1993, 161:467-482.
95. Thompson D.J. Theoretical modelling of wheel-rail noise generation. Proceedings of the Institution of Mechanical Engineers, 205, Part F (Journal of Rail and Rapid Transit) 1991, 137-149.
96. Hemsworth B. Vibration of a rolling wheel - preliminary results. Journal of Sound and Vibration 1983, 87:189-194.
97. Thompson D.J., Vincent N., Gautier P.E. Validation of a model for railway rolling noise using field measurements with sinusoidally profiled wheels. Journal of Sound and Vibration 1999, 223:587-609.
98. Ferguson N.S. Modelling the vibrational characteristics and radiated sound power for a Y25 type bogie and wagon. Journal of Sound and Vibration 2000, 231:791-803.
99. de Beer F., Verheij J.W. Experimental determination of pass-by noise contributions from the bogies and superstructure of a freight wagon. Journal of Sound and Vibration 2000, 231:639-652.
100. Janssens M.H.A., Verheij J.W., Thompson D.J. The use of an equivalent forces method for quantifying structural sound transmission in ships. Journal of Sound and Vibration 1999, 226:305-328.
101. Esveld C. Modern Railway Track 2001, MRT Publications, Zaltbommel. 2nd edition.
102. Johansson A. Out-of-round railway wheels - assessment of wheel tread irregularities in train traffic. Journal of Sound and Vibration 2006, 293:795-806.
103. Kalker J.J. Three Dimensional Elastic Bodies in Rolling Contact 1990, Kluwer Academic Publishers, Dordrecht.
104. Thompson D.J., Janssens M.H.A., de Beer F.G. TWINS: Track-Wheel Interaction Noise Software, theoretical manual (version 3.0). TNO report HAG-RPT-990211 1999, TNO Institute of Applied Physics, Delft.
105. Johnson K.L. Contact Mechanics 1985, Cambridge University Press, Cambridge.
106. Timoshenko S.P., Goodier J.N. Theory of Elasticity 1982, McGraw-Hill. 3rd edition.
107. Harris T.A. Roller Bearing Analysis 2001, John Wiley & Sons, New York. 4th edition.
108. Mindlin R.D. Compliance of elastic bodies in contact. Journal of Applied Mechanics 1949, 71:259-268.
109. Thompson D.J. Wheel-rail noise: theoretical modelling of the generation of vibrations 1990, PhD thesis, University of Southampton.
110. Vermeulen P.J., Johnson K.L. Contact of nonspherical elastic bodies transmitting tangential forces. Trans ASME Journal of Applied Mechanics June 1964, 338-340.
111. Z.Y. Shen, J.K. Hedrick and J.A. Elkins. A comparison of alternative creep-force models for rail vehicle dynamic analysis. Proceedings of 8th IAVSD Symposium, Cambridge MA, Swets and Zeitlinger, Lisse, 591-605, 1983.
112. Sheng X., Thompson D.J., Jones C.J.C. Modelling rail roughness growth on tangent tracks March 2004, ISVR Technical Memorandum No. 929, University of Southampton.
113. Knothe K., Gross-Thebing A. Derivation of frequency dependent creep coefficients based on an elastic half-space model. Vehicle System Dynamics 1986, 15:133-153.
114. Remington P.J. Wheel/rail noise, Part IV: Rolling noise. Journal of Sound and Vibration 1975, 46:419-436.
115. Remington P., Webb J. Estimation of wheel/rail interaction forces in the contact area due to roughness. Journal of Sound and Vibration 1996, 193:83-102.
116. Thompson D.J. The influence of the contact zone on the excitation of wheel/rail noise. Journal of Sound and Vibration 2003, 267:523-535.
117. Thompson D.J., Remington P.J. The effects of transverse profile on the excitation of wheel/rail noise. Journal of Sound and Vibration 2000, 231:537-548.
118. Ford R.A.J., Thompson D.J. Simplified contact filters in wheel/rail noise prediction. Journal of Sound and Vibration 2006, 293:807-818.
119. Hölzl G., Redmann M., Holm P. Entwicklung eines hochempfindlichen Schienenoberflächenmeßgeräts als Beitrag zu weiteren möglichen Lärmminderungsmaßnahmen im Schienenverkehr. Eisenbahn Technische Rundschau 1990, 39:685-689.
120. Grassie S.L., Saxon M., Smith J.D. Measurement of longitudinal rail irregularities and criteria for acceptable grinding. Journal of Sound and Vibration 1999, 227:949-964.
121. ORE Question C163, Report RP9. Wheel/rail contact noise - an experimental comparison of systems for measuring the rail roughness 1988, Utrecht.
122. CEN, Railway applications - Noise emission - Road test of draft standard for rail roughness measurement prEN 15610:2006, draft Technical Report, prCEN/TR 1-1:2008:2, 2008.
123. International standard Railway applications - Acoustics - Measurements of noise emitted by railbound vehicles 2005, International Standards Organization, ISO 3095.
124. Directive 2001/16/EC of the European Parliament and of the Council of 19 March 2001 on the interoperability of the trans-European conventional rail system. Official Journal of the European Communities, 2 April 2001.
125. Commission Decision 2002/735/EC concerning the Technical Specification for Interoperability (TSI) relating to the rolling stock subsystem of the trans-European high-speed rail system. Official Journal of the European Communities 12.9.2002 L245/402-506, 2002.
126. A.E.J. Hardy. Draft proposal for noise measurement standard for ERRI committee C163. Report RR-SPS-97-012 Issue 1, BR Research - published through ERRI, 1997.
127. Verheijen E. A survey on roughness measurements. Journal of Sound and Vibration 2006, 293:784-794.
128. Asmussen B., Onnich H., Strube R., Greven L.M., Schröder S., Jäger K., Degen K.G. Status and perspectives of the 'specially monitored track'. Journal of Sound and Vibration 2006, 293:1070-1077.
129. Janssens M.H.A., Dittrich M.G., de Beer F.G., Jones C.J.C. Railway noise measurement method for pass-by noise, total effective roughness, transfer functions and track spatial decay. Journal of Sound and Vibration 2006, 293:1007-1028.
130. Shin K., Hammond J.K. Fundamentals of Signal Processing for Sound and Vibration Engineers 2008, John Wiley & Sons.
131. Diehl R.J., Holm P. Roughness measurements - have the necessities changed?. Journal of Sound and Vibration 2006, 293:777-783.
132. ORE Question C163, Report RP7. Wheel/rail contact noise - comparative study between theoretical model and measured results 1986, Utrecht.
133. Thompson D.J. On the relationship between wheel and rail roughness and rolling noise. Journal of Sound and Vibration 1996, 193:149-160.
134. Thompson D.J. Wheel-rail noise generation, Part IV: Contact zone and results. Journal of Sound and Vibration 1993, 161:447-466.
135. Wu T.X., Thompson D.J. Vibration analysis of railway track with multiple wheels on the rail. Journal of Sound and Vibration 2001, 239:69-97.
136. Wu T.X., Thompson D.J. An investigation into rail corrugation due to micro-slip under multiple wheel/rail interactions. Wear 2005, 258:1115-1125.
137. Wu T.X., Thompson D.J. The effects on railway rolling noise of wave reflections in the rail and support stiffening due to the presence of multiple wheels. Applied Acoustics 2001, 62:1249-1266.
138. Nordborg A. Wheel/rail noise generation due to nonlinear effects and parametric excitation. Journal of the Acoustical Society of America 2002, 111:1772-1781.
139. Wu T.X., Thompson D.J. On the rolling noise generation due to wheel/track parametric excitation. Journal of Sound and Vibration 2006, 293:566-574.
140. Sheng X., Jones C.J.C., Thompson D.J. Responses of infinite periodic structures to moving or stationary harmonic loads. Journal of Sound and Vibration 2005, 282:125-149.
141. Kitagawa T., Thompson D.J. Comparison of wheel/rail noise radiation on Japanese railways using the TWINS model and microphone array measurements. Journal of Sound and Vibration 2006, 293:496-509.
142. Fahy F.J., Gardonio P. Sound and Structural Vibration: Radiation, Transmission and Response 2006, Academic Press, Oxford. 2nd edition.
143. Strutt (Lord Rayleigh) J.W. Theory of Sound 1945, Dover Publications, New York, Reissue. See section 278. 2nd edition.
144. Wallace C.E. Radiation resistance of a rectangular panel. Journal of the Acoustical Society of America 1972, 51. 946-852.
145. Bies D.A., Hansen C.H. Engineering Noise Control 1996, E&FN Spon, London. 2nd edition.
146. Pierce A.D. Acoustics: An Introduction to its Physical Principles and Applications 1989, Acoustical Society of America, Woodbury, NY.
147. Morse P.M., Ingard K.U. Theoretical Acoustics 1986, Princeton University Press, Princeton NJ.
148. Remington P.J. Wheel/rail rolling noise, I: theoretical analysis. Journal of the Acoustical Society of America 1987, 81:1805-1823.
149. Remington P.J. Wheel/rail noise - Part I: Characterization of the wheel/rail dynamic system. Journal of Sound and Vibration 1976, 46:359-379.
150. Schneider E., Popp K., Irretier H. Noise generation in railway wheels due to rail-wheel forces. Journal of Sound and Vibration 1988, 120:227-244.
151. Thompson D.J. Predictions of acoustic radiation from vibrating wheels and rails. Journal of Sound and Vibration 1988, 120:275-280.
152. Wu T.W. Boundary Element Acoustics: Fundamentals and Computer Codes 2000, WIT Press, Southampton.
153. U. Fingberg. Ein Modell für das Kurvenquietschen von Schienenfahrzeugen. VDI Fortschritt-berichte, Reihe 11, Nr. 140, 1990.
154. Thompson D.J., Jones C.J.C. Sound radiation from a vibrating railway wheel. Journal of Sound and Vibration 2002, 253:401-419.
155. D.J. Thompson and M.G. Dittrich. Wheel response and radiation - laboratory measurements of five types of wheel and comparisons with theory. ORE Technical Document DT248 (C163), Utrecht, 1991.
156. Zhang X., Jonasson H.G. Directivity of railway noise sources. Journal of Sound and Vibration 2006, 293:995-1006.
157. M.G. Dittrich, W.J. van Vliet, and D.J. Thompson. Characterisation of track response and radiation. Step 3 - response of tracks 4 and 5, TNO report TPD-HAG-RPT-91-0161, 1991.
158. D.J. Thompson, M.H.A. Janssens, and F.G. de Beer. TWINS: Track-Wheel Interaction Noise Software, theoretical manual (version 3.0). TNO report HAG-RPT-990211, Delft, 1999.
159. Thompson D.J., Jones C.J.C., Turner N. Investigation into the validity of two-dimensional models for sound radiation from waves in rails. Journal of the Acoustical Society of America 2003, 113:1965-1974.
160. Orrenius U., Finnveden S. Calculation of wave propagation in rib-stiffened plate structures. Journal of Sound and Vibration 1996, 198:203-224.
161. C-M. Nilsson. Waveguide Finite Elements Applied on a Car Tyre. PhD thesis, Royal Institute of Technology, Aeronautical and Vehicle Engineering MWL, 2004. TRITA-AVE 2004:21, ISBN 91-7283-798-5.
162. Duhamel D. Efficient calculation of the three-dimensional sound pressure field around a noise barrier. Journal of Sound and Vibration 1996, 197:547-571.
163. C-M. Nilsson, A.N. Thite, C.J.C. Jones, and D.J. Thompson. Estimation of sound transmission through extruded panels using a coupled waveguide Finite Element-Boundary Element method. Proceedings of 9th International Workshop on Railway Noise, Feldafing, Germany, September 2007.
164. C-M. Nilsson, C.J.C. Jones, D.J. Thompson, and J. Ryne. A waveguide finite element and boundary element approach to calculating the sound radiated by tram rails. Journal of Sound and Vibration, 2008, accepted for publication.
165. Kitagawa T., Thompson D.J. Comparison of wheel/rail noise radiation on Japanese railways using the TWINS model and microphone array measurements. Journal of Sound and Vibration 2006, 293:496-509.
166. Barsikow B., King W.F., Pfizenmaier E. Wheel/rail noise generated by a high-speed train investigated by a line array of microphones. Journal of Sound and Vibration 1987, 118:99-122.
167. Barsikow B. Experiences with various configurations of microphone arrays used to locate sound sources on railway trains operated by the DB AG. Journal of Sound and Vibration 1996, 193:283-293.
168. Hölzl G. Low noise goods wagons. Journal of Sound and Vibration 1996, 193:359-366.
169. van der Toorn J.D., Hendricks H., van den Dool T.C. Measuring TGV source strength with Syntacan. Journal of Sound and Vibration 1996, 193:113-121.
170. Dittrich M.G., Janssens M.H.A. Improved measurement methods for railway rolling noise. Journal of Sound and Vibration 2000, 231:595-609.
171. Brühl S., Röder A. Acoustic noise source modelling based on microphone array measurements. Journal of Sound and Vibration 2000, 231:611-617.
172. C. Hanson and B. Barsikow. Noise sources on Amtrak's high speed train. Proceedings of Inter Noise 2000, Nice (France), August 2000.
173. A. Nordborg, A. Martens, J. Wedemann, and L. Willenbrink. Wheel/rail noise separation with microphone array. Proceedings of Inter Noise 2001, The Hague (Netherlands), August 2001.
174. K.G. Degen, A. Nordborg, A. Martens, J. Wedemann, L. Willenbrink, and M. Bianchi. Spiral array measurements of high-speed train noise. Proceedings of Inter Noise 2001, The Hague (Netherlands), August 2001.
175. T. Kitagawa, Y. Zenda, Y. Abe, and Y. Ogata. Sound radiated by vibration of railway wheels. Proceedings of Inter Noise 2001, The Hague (Netherlands), August 2001.
176. International standard: Railway applications - Acoustics - Measurements of noise emitted by railbound vehicles. International Standards Organization, ISO 3095:2005.
177. Embleton T.F.W. Tutorial on sound propagation outdoors. Journal of the Acoustical Society of America 1996, 100:31-48.
178. Attenborough K. Sound propagation in the atmosphere. Handbook of Noise and Vibration Control 2007, John Wiley & Sons, Hoboken, NJ. M.J. Crocker (Ed.).
179. Chessell C.I. Propagation of noise along a finite impedance boundary. Journal of the Acoustical Society of America 1977, 62:825-834.
180. Delany M.E., Bazley E.N. Acoustical properties of fibrous absorbent materials. Applied Acoustics 1970, 3:105-116.
181. Embleton T.F.W., Piercy J.E., Daigle G.A. Effective flow resistivity of ground surfaces determined by acoustical measurements. Journal of the Acoustical Society of America 1983, 74:1239-1244.
182. Thompson D.J., Hemsworth B., Vincent N. Experimental validation of the TWINS prediction program, Part 1: Method. Journal of Sound and Vibration 1996, 193:123-135.
183. Thompson D.J., Fodiman P., Mahé H. Experimental validation of the TWINS prediction program, Part 2: Results. Journal of Sound and Vibration 1996, 193:137-147.
184. Jones C.J.C., Thompson D.J. Extended validation of a theoretical model for railway rolling noise using novel wheel and track designs. Journal of Sound and Vibration 2003, 267:509-522.
185. Fahy F.J. Fundamentals of noise and vibration control, Chapter 5 in Fundamentals of Noise and Vibration 1998, Spon Press. F.J. Fahy, J.G. Walker (Eds.).
186. Thompson D.J., Hemsworth B., Vincent N. Experimental validation of the TWINS prediction program for rolling noise, Part 1: Description of the model and method. Journal of Sound and Vibration 1996, 193:123-135.
187. Thompson D.J., Fodiman P., Mahé H. Experimental validation of the TWINS prediction program for rolling noise, Part 2: Results. Journal of Sound and Vibration 1996, 193:137-147.
188. Jones C.J.C., Edwards J.W. Development of wheels and track components for reduced rolling noise from freight trains. Proceedings of Internoise 1996, Liverpool, 403-408.
189. P. Fodiman. Line test validation of low noise railway components. Proceedings of World Congress on Railway Research, Colorado, USA, 1996.
190. L. Guccia. Synthèse finale des travaux, groupe de travil bruit de roulement MONA-RONA-VONA, SNCF Direction de la Recherche, report RVA/LG/roult/c/970729, 1997.
191. P. Fodiman, L. Castel and G. Gaborit. Validation of a TGV-A trailing-car wheel with an acoustically optimised profile. Proceedings of 11th International Wheelset Congress, Paris, June 1995.
192. L. Guccia, P. Fodiman, P.E. Gautier, N. Vincent and P. Bouvet. High-speed rolling noise design and validation of low noise components. Proceedings of World Congress on Railway Research, Florence, Italy, 179-187, 1997.
193. B. Hemsworth, P.E. Gautier and R. Jones. Silent Freight and Silent Track projects. Proceedings of Internoise 2000, Nice, France 2000.
194. Hemsworth B. Silent Freight/Silent Track/Eurosabot projects - Summary 2001, ERRI, Utrecht, The Netherlands.
195. Hemsworth B., Jones R.R.K. Silent Freight project - final report 2000, ERRI, Utrecht, The Netherlands.
196. Hemsworth B. Silent Track project - final report 2000, ERRI, Utrecht, The Netherlands.
197. P. de Vos and S. van Lier. Noise-related roughness on railway wheels generated by tread braking. Proceedings of Internoise 2000, Nice, France, 2000.
198. J. Lub. The quiet rail traffic (STV) project. Part 2 - demonstrating practical low noise solutions. Proceedings of the Joint EAA/ASA/DEGA Meeting on Acoustics, Berlin, 1999.
199. Lub J. Een moedige speurtocht naar stiller treinverkeer: het project STV. National Congress on Sound and Vibration 1999, Rotterdam.
200. D.J. Thompson and P.E. Gautier. A review of research into wheel/rail rolling noise reduction. Proceedings of the Institution of Mechanical Engineers, Part F, Journal of Rail and Rapid Transit, 220F, 385-408, 2006.
201. Peen J., Mulder B., van Roij W.J.G. Whispering trains projects: noise reduction of freight wagons using LL-blocks. 9th International Workshop on Railway Noise September 2007, Feldafing, Germany, 4-8.
202. Kuijpers A.H.W.M. Rail roughness monitoring in the Netherlands. 9th International Workshop on Railway Noise September 2007, Feldafing, Germany, 4-8.
203. van den Dool P.H. Rail dampers, rail infrastructure gets quiet. Inter-Noise 2007 August 2007, Istanbul, Turkey, 28-31.
204. van Haaren E., van Keulen G.A. New raildampers at the railway link Roosendaal-Vlissingen, tested within the Dutch Innovation Program. 9th International Workshop on Railway Noise September 2007, Feldafing, Germany, 4-8.
205. Hemsworth B. Recent developments in wheel/rail noise research. Journal of Sound and Vibration 1979, 66:297-310.
206. Dings P.C., Dittrich M.G. Roughness on Dutch railway wheels and rails. Journal of Sound and Vibration 1996, 193:103-112.
207. Thompson D.J. On the relationship between wheel and rail surface roughness and rolling noise. Journal of Sound and Vibration 1996, 193:149-160.
208. Thompson D.J., Remington P.J. The effects of transverse profile on the excitation of wheel/rail noise. Journal of Sound and Vibration 2000, 231:537-548.
209. Johansson A. Out-of-round railway wheels - assessment of wheel tread irregularities in train traffic. Journal of Sound and Vibration 2006, 293:795-806.
210. Verheijen E. Statistical analysis of railway noise: trackside monitoring of individual trains. 9th International Workshop on Railway Noise September 2007, Feldafing, Germany, 4-8.
211. Vernersson T. Thermally induced roughness of railway wheels, Part 1: Brake rig experiments. Wear 1999, 236:96-105.
212. Vernersson T. Thermally induced roughness of railway wheels, Part 2: Modelling and field measurements. Wear 1999, 236:106-116.
213. M. Petersson. Noise-related roughness of railway wheel treads - full-scale testing of brake blocks. Proceedings of the Institution of Mechanical Engineers, Part F, Journal of Rail and Rapid Transit, 214F, 63-77, 2000.
214. P. Hübner. The Action Programme of UIC, UIP and CER 'Abatement of Railway Noise Emissions on Goods Trains'. Proceedings of Internoise 2001, The Hague, Netherlands, 107-112, 2001.
215. de Vos P.H., Bergendorff M., Brennan M., van der Zijpp F. Implementing the retrofitting plan for the European rail freight fleet. Journal of Sound and Vibration 2006, 293:1051-1057.
216. Directive 2001/16/EC of the European Parliament and of the Council of 19 March 2001 on the interoperability of the trans-European conventional rail system. Official Journal of the European Communities, L110, 1-27, 2001.
217. S.L. Grassie and J. Kalousek. Rail corrugation: characteristics, causes and treatments. Proceedings of the Institution of Mechanical Engineers, Part F, Journal of Rail and Rapid Transit, 207F, 57-68, 1993.
218. Asmussen B., Onnich H., Strube R., Greven L.M., Schröder S., Jäger K., Degen K.G. Status and perspectives of the 'Specially Monitored Track'. Journal of Sound and Vibration 2006, 293:1070-1077.
219. Ilias H. The influence of railpad stiffness on wheelset/track interaction and corrugation growth. Journal of Sound and Vibration 1999, 227:935-948.
220. Sheng X., Thompson D.J., Jones C.J.C., Xie G., Iwnicki S.D., P., Allen, Hsu S.S. Simulations of roughness growth on railway rails. Journal of Sound and Vibration 2006, 293:819-829.
221. Grassie S., Edwards J., Shepherd J. Roaring rails - an enigma largely explained. International Railway Journal 2007, 47(7):31-33.
222. Hempelmann K. Short pitch corrugation on railway rails - a linear model for prediction. VDI Fortschrittberichte. Reihe 12, nr 1994, 231.
223. Igeland A. Dynamic train/track interaction: simulation of railhead corrugation growth under a moving bogie using mathematical models combined with full-scale measurements 1997, Doctoral thesis, Division of Solid Mechanics, Chalmers University of Technology, Göteborg, Sweden.
224. Nielsen J.C.O., Lundén R., Johansson A., Vernersson T. Train-track interaction and mechanisms of irregular wear on wheel and rail surfaces. Vehicle System Dynamics 2003, 40:3-54.
225. Nielsen J.C.O. Numerical prediction of rail roughness growth on tangent tracks. Journal of Sound and Vibration 2003, 267:537-548.
226. B.E. Croft, C.J.C. Jones and D.J. Thompson. Reducing wheel-rail interaction forces and roughness growth by application of rail dampers. Proceedings of the 9th International Workshop on Railway Noise, Feldafing, Munich, 4-8 September 2007.
227. P.J. Remington. The resiliently treaded wheel - a concept for control of wheel/rail rolling noise. Proceedings of Internoise, Avignon, France, 1401-1406, 1988.
228. Hölzl G. A quiet railway by noise optimised wheels (in German). ZEV+DET Glas. Ann. 1994, 188(1):20-23.
229. Jones C.J.C., Thompson D.J. Means of controlling rolling noise at source, Chapter 6 in Noise and Vibration from High-Speed Trains 2001, 163-183. Thomas Telford, London. V.V. Krylov (Ed.).
230. D.J Thompson and M.G. Dittrich. Railway rolling noise - vibration response measurements of five types of wheel. TNO report TPD-HAG-RPT-90-0098, August 1990.
231. P. Fodiman, L. Castel and G. Gaborit. Validation of a TGV-A trailing-car wheel with an acoustically optimised profile. Proceedings of 11th International Wheelset Congress, Paris, 1995.
232. Thompson D.J. Wheel-rail noise generation, Part II: Wheel vibration. Journal of Sound and Vibration 1993, 161:401-419.
233. P.E. Gautier, N. Vincent, D.J. Thompson and G. Hölzl. Railway wheel optimization. Proceedings of Inter Noise, Leuven, 1455-1458, 1993.
234. D.J. Thompson and C.J.C. Jones. A study of the use of vehicles with small wheels for determining the component of noise from the track. Proceedings of IOA Spring Conference, Salford, March 2002.
235. C. Jones, D.J. Thompson, A. Frid and M. Wallentin. Design of a railway wheel with acoustically improved cross-section and constrained layer damping. Proceedings of Internoise 2000, Nice, France.
236. A. Bracciali and M. Bianchi. Lucchini CRS Syope damped wheels noise qualification. Proceedings of the International Wheelset Congress, Italy, 2001.
237. S. Cervello, G. Donzella, A. Pola and M. Scepi. Analysis and design of a low-noise railway wheel. Proceedings of the Institution of Mechanical Engineers, Part F, Journal of Rail and Rapid Transit, 215F, 179-192, 2001.
238. R. Hemelrijk. The effect of wheel dampers on the sound emission of trains (in Dutch). Proceedings of the Dutch Acoustical Society (NAG), 67, 27-37, 1983.
239. ORE Reduction of running noise by wheel-mounted devices. Question C163 Railway Noise 1989, Report RP13, Utrecht.
240. P. Bouvet, N. Vincent, A. Coblenz and F. Demilly. Rolling noise from freight railway traffic: reduction of wheel radiation by means of tuned absorbers. Proceedings of Internoise 2000, Nice, France.
241. Färm J. Evaluation of wheel dampers in an intercity train. Journal of Sound and Vibration 2003, 267:739-747.
242. I. Lopez, J. Vinolas, J. Busturia and A. Castanares. Railway wheel ring dampers. Proceedings of Internoise 2000, Nice, France, 2000.
243. Behr W., Cervello S. Optimization of a wheel damper for freight wagons using FEM simulation. 9th International Workshop on Railway Noise September 2007, Feldafing, Germany, 4-8.
244. Létourneaux F. High speed railway noise: assessment of mitigation measures. 9th International Workshop on Railway Noise September 2007, Feldafing, Germany, 4-8.
245. Jones C.J.C., Thompson D.J. Rolling noise generated by wheels with visco-elastic layers. Journal of Sound and Vibration 2000, 231:779-790.
246. Anon DB grounds ICE1 fleet after Eschede disaster. Railway Gazette International 1998, 154:449.
247. P. Bouvet, N. Vincent, A. Coblentz and F. Demilly. Optimisation of resilient wheel for rolling noise control. Proceedings of the 6th International Workshop on Railway and Tracked Transit System Noise, Ile des Embiez, France, 264-273, 1998.
248. A. Daneryd, J. Nielsen, E. Lundberg and A. Frid. On vibro-acoustic and mechanical properties of a perforated railway wheel. Proceedings of the 6th International Workshop on Railway and Tracked Transit System Noise, Ile des Embiez, France, 305-317, 1998.
249. Putra A., Thompson D.J. Sound radiation from a perforated unbaffled plate. International Congress on Acoustics September 2007, Madrid, 3-7.
250. Vincent N., Bouvet P., Thompson D.J., Gautier P.E. Theoretical optimization of track components to reduce rolling noise. Journal of Sound and Vibration 1996, 193:161-171.
251. Thompson D.J., Verheij J.W. The dynamic behaviour of rail fasteners at high frequencies. Applied Acoustics 1997, 52(1):1-17.
252. Wu T.X., Thompson D.J. The effects of local preload on the foundation stiffness and vertical vibration of railway track. Journal of Sound and Vibration 1999, 219:881-904.
253. D.J. Thompson, C.J.C. Jones, T.X. Wu and G. de France. The influence of the non-linear stiffness behaviour of rail pads on the track component of rolling noise. Proceedings of the Institution of Mechanical Engineers, Part F, Journal of Rail and Rapid Transit, 213F, 233-241, 1999.
254. Thompson D.J. A continuous damped vibration absorber to reduce broad-band wave propagation in beams. Journal of Sound and Vibration 2008, 311:824-842.
255. Thompson D.J., Jones C.J.C., Waters T.P., Farrington D. A tuned damping device for reducing noise from railway track. Applied Acoustics 2007, 68:43-57.
256. Létourneaux F., Margiocchi F., Poisson F. Complete assessment of rail absorber performances on an operated track in France. World Congress on Railway Research June 2006, Montreal, Canada.
257. Asmussen B., Stiebel D., Kitson P., Farrington D., Benton D. Reducing the noise emission by increasing the damping of the rail: results of a field test. 9th International Workshop on Railway Noise September 2007, Feldafing, Germany, 4-8.
258. B. Croft and C.J.C. Jones. Modelling the effect of rail dampers on railway rolling noise and the rate of railhead roughness growth. Silence Subproject G2 Technical Report, ISVR Contract Report CR07/17, December 2007.
259. Thompson D.J., Jones C.J.C. A review of the modelling of wheel/rail noise generation. Journal of Sound and Vibration 2000, 231(3):519-536.
260. European Patent: Improvements in railways. British Steel plc and British Railways Board, filed 21.09.89.
261. Jones C.J.C. Reduction of noise and ground vibration from freight trains. I.Mech.E. International Conference on Better Journey Times - Better Business 1996, Birmingham, 87-97, paper C514/082/96.
262. Vincent N. Rolling noise control at source - state of the art survey. Journal of Sound and Vibration 2000, 231:865-876.
263. C-M. Nilsson, C.J.C. Jones, D.J. Thompson, and J. Ryne. A waveguide finite element and boundary element approach to calculating the sound radiated by tram rails. Submitted for publication.
264. Diehl R.J., Nowack R., Hölzl G. Solutions for acoustical problems with ballastless track. Journal of Sound and Vibration 2000, 231:899-906.
265. Hauck G., Weissenberger W., Scheuren J., Lange E. Untersuchungen zur Verringerung der Schallabstrahlung von 'Feste Fahrbahnen' durch absorbierende Beläge. Eisenbahntechnische Rundschau 1995, 44:559-565.
266. M.H.A. Janssens. Low noise slab-track design: acoustic development and final tests. Proceedings of the Sixth International Congress on Sound and Vibration, Lyngby, Denmark, 36, 2643-2652, 1999.
267. van Lier S. The vibro-acoustic modelling of slab track with embedded rails. Journal of Sound and Vibration 2000, 231:805-817.
268. R.R.K. Jones. Bogie shrouds and low barriers could significantly reduce wheel/rail noise. Railway Gazette International 459-462, July 1994.
269. Jones C.J.C., Thompson D.J., Waters T.P. Application of numerical models to a system of train- and track-mounted acoustic shields. International Journal of Acoustics and Vibration 2001, 6(4):185-192.
270. Jones C.J.C., Hardy A.E.J., Jones R.R.K., Wang A. Bogie shrouds and low trackside barriers for the control of railway vehicle rolling noise. Journal of Sound and Vibration 1996, 193:427-431.
271. R. Jones, M. Beier, R.J. Diehl, C. Jones, M. Maderboeck, C. Middleton and J. Verheij. Vehicle-mounted shields and low trackside barriers for railway noise control in a European context. Proceedings of Internoise 2000, Nice, France, 2000.
272. Oertli J. The case for retrofitting freight wagons. 9th International Workshop on Railway Noise September 2007, Feldafing, Germany, 4-8.
273. Oertli J. The STAIRRS project, Work package 1: A cost-effectiveness analysis of railway noise reduction on a European scale. Journal of Sound and Vibration 2003, 267:431-437.
274. Arenas J.P. Use of barriers, Chapter 58 in Handbook of Noise and Vibration Control 2007, John Wiley & Sons, Hoboken NJ. M.J. Crocker (Ed.).
275. Horoshenkov K., Lam Y.W., Attenborough K. Noise attenuation provided by road and rail barriers, earth berms, buildings and vegetation, Chapter 122 in Handbook of Noise and Vibration Control 2007, John Wiley & Sons, Hoboken NJ. M.J. Crocker (Ed.).
276. Anderson G.S., Kurze U.J. Outdoor sound propagation, Chapter 5 in Noise and Vibration Control Engineering 1992, John Wiley & Sons, New York. L.L. Beranek, I.L. Ver (Eds.).
277. Maekawa Z. Noise reduction by screens. Applied Acoustics 1968, 1:157-173.
278. Kurze U.J., Anderson G.S. Sound attenuation by barriers. Applied Acoustics 1971, 4:35-53.
279. Z. Maekawa. Environmental sound propagation. Proceedings of the 8th International Congress on Acoustics, London, UK, 1974.
280. Hemsworth B. Rail system environmental noise prediction, assessment and control, Chapter 121 in Handbook of Noise and Vibration Control 2007, John Wiley & Sons, Hoboken NJ. M.J. Crocker (Ed.).
281. B. Hemsworth. Noise barriers for fast passenger trains. Proceedings of Internoise 77, Zürich, Switzerland, B465-470, 1977.
282. ISO 9613-2:1996, Acoustics - attenuation of sound during propagation outdoors - Part 2: General method of calculation. International Standards Organization, 1996.
283. Mauclaire B. Noise generated by high speed trains. New information acquired by SNCF in the field of acoustics owing to the high speed test programme. Proceedings Inter Noise 1990, 90:371-374.
284. German-French Cooperation Deufrako Annex K, 1994. Noise sources from high speed guided transport, final report.
285. German-French Cooperation Deufrako Annex K2, 1999. Noise sources from high speed guided transport, final report.
286. Astley J., et al. Predicting and reducing aircraft noise. 14th International Congress on Sound and Vibration July 2007, Cairns, Australia.
287. P. Crespi, R. Grégoire and P. Vinson. Laser Doppler velocimetry measurements and boundary layer survey on-board the TGV high speed train. Proceedings of World Congress on Railway Research, Paris, 1994.
288. Le Dévéhat E., Talotte C., Dugardin A. Aerodynamic noise reduction using a CFD approach based on the prediction of the turbulence production area. MIRA International Conference on Vehicle Aerodynamics 1996, Coventry, UK.
289. Paradot N. Etudes numerique et experimentale de la resistance à l'avancement d'un train à grande vitesse 2001, PhD thesis, University of Poitiers.
290. Lighthill M.J. On sound generated aerodynamically, I. General theory. Proc. Royal Society, London 1952, A211:564.
291. F.J. Fahy. Fundamentals of noise and vibration control, Chapter 5 in Fundamentals of Noise and Vibration. In: F.J. Fahy and J.G. Walker (eds.). E&FN Spon, 1998.
292. Noger C., Patrat J.C., Peube J., Peube J.L. Aeroacoustical study of the TGV pantograph recess. Journal of Sound and Vibration 2000, 231:563-575.
293. P. Vinson and P. Pinconnat. TGV-Duplex à 350 km/h, bruit rayonné dans l'environnement au passage en champ libre, derrière Merlon et Écran. SNCF report AEF-D R03030/02D-127, 2003.
294. B. Barsikow. Schallabstrahlung spurgebundener Hochgeschwindigkeitsfahrzeuge bis 500km/h. Proceedings DAGA '89, 607-610, 1989.
295. King W.F. On the role of aerodynamically generated sound in determining noise levels from high-speed trains. Journal of Sound and Vibration 1977, 54:361-378.
296. King W.F., Bechert D. On the sources of wayside noise generated by high-speed trains. Journal of Sound and Vibration 1979, 66:311-332.
297. Fodiman P. The NOEMIE project. Project no. 2002/EU/1663, Final report 2005, AEIF.
298. Mellet C., Létourneaux F., Poisson F., Talotte C. High speed train noise emission: latest investigation of the aerodynamic/rolling noise contribution. Journal of Sound and Vibration 2006, 293:535-546.
299. Aeroacoustic Measurements 2002, Springer, Berlin. T.J. Mueller (Ed.).
300. P. Nelson. Source identification and location, Chapter 3 in Advanced Applications of Acoustics, Noise and Vibration,. In: F.J. Fahy and J.G. Walker (eds.). Spon Press, London, 2004.
301. J.J. Christensen and J. Hald, Beamforming. Brüel & Kjaer Technical Review No. 1, 2004.
302. Kitagawa T., Thompson D.J. Comparison of wheel/rail noise radiation on Japanese railways using the TWINS model and microphone array measurements. Journal of Sound and Vibration 2006, 293:496-509.
303. Barsikow B., King W.F., Pfizenmaier E. Wheel/rail noise generated by a high speed train investigated by a line array of microphones. Journal of Sound and Vibration 1987, 118:99-122.
304. Brühl S., Röder A. Acoustic noise source modelling based on microphone array measurements. Journal of Sound and Vibration 2000, 231:611-617.
305. Barsikow B. Experiences with various configurations of microphone arrays used to locate sound sources on railway trains operated by the DB AG. Journal of Sound and Vibration 1996, 193:283-293.
306. Boone M.M., Kinneging N., Van den Dool T. Two-dimensional noise source imaging with a T-shaped microphone cross array. Journal of the Acoustical Society of America 2000, 108:2884-2890.
307. Talotte C. Aerodynamic noise, a critical survey. Journal of Sound and Vibration 2000, 231:549-562.
308. Nordborg A., Wedemann J., Willenbrink L. Optimum array microphone configuration. Proceedings Inter Noise 2000, 2000. Nice, France.
309. J.F. Hamet, M-A. Pallas and K.P. Schmitz. Deufrako-1: microphone array techniques used to locate acoustic sources on ICE, TGV-A and Transrapid 07. Proceedings of Inter Noise 94, Yokohama, Japan, 187-192, 1994.
310. Barsikow B., King W.F. On removing the Doppler frequency shift from array measurements of railway noise. Journal of Sound and Vibration 1988, 120:190-196.
311. G. Hölzl, P. Fodiman, K.P. Schmitz, M-A. Pallas, and B. Barsikow. Deufrako-2: localized sound sources on the high-speed vehicles ICE, TGV-A and TR 07. Proceedings of Inter Noise 94, Yokohama, Japan, 193-198, 1994.
312. F. Poisson, J.C. Valière and O. Coste. Directivity pattern measurement of moving acoustic sources. Proceedings of 8th IEEE Signal Processing Workshop on Statistical Signal and Array Processing, Corfu, Greece, 90-93, 1996.
313. Nagakura K. Localization of aerodynamic noise sources of Shinkansen trains. Journal of Sound and Vibration 2006, 293:547-565.
314. Maeda T., Kondo Y. RTRI's Large-scale low-noise wind tunnel and wind tunnel tests. Quarterly Report of Railway Technical Research Institute 2001, 42:65-70.
315. Kitagawa T., Nagakura K. Aerodynamic noise generated by Shinkansen cars. Journal of Sound and Vibration 2000, 231:913-924.
316. Frémion N., Vincent N., Jacob M., Robert G., Louisot A., Guerrand S. Aerodynamic noise radiated by the intercoach spacing and the bogie of a high-speed train. Journal of Sound and Vibration 2000, 231:577-593.
317. Talotte C., Gautier P.E., Thompson D.J., Hanson C. Identification, modelling and reduction potential of railway noise sources: a critical survey. Journal of Sound and Vibration 2003, 267:447-468.
318. Jacob M., Gradoz V., Louisot A., Juvé D., Guerrand S. Comparison of sound radiated by shallow cavities and backward steps. AIAA Congress 1999, Seattle, USA.
319. S. Nakagawa. Low noise pantographs and insulators. Proceedings of World Congress on Railway Research 1997, Firenze, Italy, 485-490, 1997.
320. T. Hariyama, Y. Sasaki, T. Ichigi, and S. Ono. Low noise pantographs and insulators (vol. 2) Proceedings of World Congress on Railway Research 1999, Tokyo, Japan, 1999.
321. A. Torii and J. Ito. Development of the series 700 Shinkansen train-set, improvement of noise level. Proceedings of World Congress on Railway Research 1999, Tokyo, Japan, 1999.
322. K. Althammer, W. Baldauf, and T. Lölgen. Considerations for high performance pantographs. Proceedings of World Congress on Railway Research 1999, Tokyo, Japan, 1999.
323. T. Lölgen. Wind tunnel noise measurements on full-scale pantograph models. Proceedings Joint ASA/EAA Meeting, Berlin, Germany, 1999.
324. L. Guccia and P.E. Gautier. Aeroacoustic research applied to TGV. Proceedings of World Congress on Railway Research 1996, Colorado Springs, USA, 1996.
325. O. Grosjean, A. Fages, J.M. Tessier, C. Bertrand, L. Guccia, and S. Guerrand. Réduction du bruit aérodynamique émis par un TGV roulant à plus de 300km/h. Proceedings of World Congress on Railway Research 1997 Firenze, Italy, 1997.
326. F. Paulin and O. Grosjean. Etude et optimization aéroacoustique de la partie basse d'un TGV en soufflerie anéchoïque, rapport finale d'essai. Report on ATREBAT project, 1997.
327. B. Schulte-Werning, G. Matschke, A. Willaime, A. Malfatti, G. Mancini, and M. Pecorini. High-speed trains with bogie fairings: European research into reducing aerodynamic drag noise. Proceedings of World Congress on Railway Research 1999, Tokyo, Japan, 1999.
328. L. Gori, G. Pugi, M.T. Cambini and A.G. Violi. Acoustic characterization of high speed train ETR500. Proceedings of World Congress on Railway Research 2001, Munich, paper 138, 2001.
329. K.G. Degen, A. Nordborg, A. Martens, J. Wedemann, L. Willenbrink, and M. Bianchi. Spiral array measurements of high-speed train noise. Proceedings Inter Noise 2001, The Hague, The Netherlands, 2001.
330. Bracciali A., Picciolo F. Experimental analysis of wheel noise emission as a function of the contact point location. Journal of Sound and Vibration 2003, 267:469-483.
331. Yamazaki N., Takaishi T. Wind tunnel tests on reduction of aeroacoustic noise from car gaps and bogie sections. Quarterly Report of RTRI 2007, Railway Technical Research Institute, Tokyo, Japan, 48, 229-235.
332. Endo T. Fastech 360 prototypes probe ultra high speed territory. Railway Gazette International 2005, 161:693-697.
333. T. Maeda. Micropressure waves radiating from a Shinkansen tunnel portal, Chapter 7 in Noise and Vibration from High-Speed Trains. In: V.V. Krylov (ed.). Thomas Telford, London, 2001.
334. Rudd M.J. Wheel/rail noise - Part II: Wheel squeal. Journal of Sound and Vibration 1976, 46:381-394.
335. Müller B. Curve squeal WP2 Inventory of the extent of the problem. Union Internationale des Chemins de Fer, internal report prepared by SBB 2003.
336. Müller B., Oertli J. Combatting curve squeal: monitoring existing applications. Journal of Sound and Vibration 2006, 293:728-734.
337. Vincent N., Koch J.R., Chollet H., Guerder J.Y. Curve squeal of urban rolling stock - Part 1: State of the art and field measurements. Journal of Sound and Vibration 2006, 293:691-700.
338. S.L. Grassie and J. Kalousek. Rail corrugation: characteristics, causes and treatments. Proceedings of the Institution of Mechanical Engineers, 207F, 57-68, 1993.
339. Remington P.J. Wheel/rail squeal and impact noise: what do we know? What don't we know? Where do we go from here?. Journal of Sound and Vibration 1987, 116:339-353.
340. Eadie D.T., Santoro M., Kalousek J. Railway noise and the effect of top of rail liquid friction modifiers: changes in sound and vibration spectral distruibutions in curves. Wear 2005, 258:1148-1155.
341. Wickens A.H. Fundamentals of Rail Vehicle Dynamics, Guidance and Stability. Swets & Zeitlinger, Lisse 2003.
342. J.A. Elkins and R.J. Gostling. A general quasi-static curving theory for railway vehicles. Proceedings of 5th IAVSD Symposium on the dynamics of vehicles on roads and on railway tracks, 388-406, 1977.
343. Koch J.R., Vincent N., Chollet H., Chiello O. Curve squeal of urban rolling stock - Part 2: Parametric study on a 1/4 scale test rig. Journal of Sound and Vibration 2006, 293:701-709.
344. P.P. Kooijman, W.J. van Vliet, M.H.A. Janssens, and F.G. de Beer. Curve squeal of railbound vehicles (Part 2): set-up for measurement of creepage dependent friction coefficient. Proceedings of Internoise 2000, Nice, France, vol. 3, 1564-1567, 2000.
345. Monk-Steel A.D., Thompson D.J., de Beer F.G., Janssens M.H.A. An investigation into the influence of longitudinal creepage on railway squeal noise due to lateral creepage. Journal of Sound and Vibration 2006, 293:766-776.
346. Fingberg U. A model of wheel-rail squealing noise. Journal of Sound and Vibration 1990, 143:365-377.
347. F.G. de Beer, M.H.A. Janssens, P.P. Kooijman, and W.J. van Vliet. Curve squeal of railbound vehicles (Part 1): frequency domain calculation model. Proceedings of Internoise 2000, Nice, France, vol. 3, 1560-1563, 2000.
348. de Beer F.G., Janssens M.H.A., Kooijman P.P. Squeal of rail bound vehicles influenced by lateral contact position. Journal of Sound and Vibration 2003, 267:497-507.
349. Kraft K. Der Enfluss der Fahrgeschwindigkeit auf den Haftwert zwischen Rad und Schiene. Archiv für Eisenbahntechnik 1967, 22:58-78.
350. F. Périard. Wheel-rail noise generation: curve squealing by trams. PhD thesis, Technische Universiteit Delft, 1998.
351. Z.Y. Huang, D.J. Thompson, and C.J.C. Jones. Squeal prediction for a bogied vehicle in a curve. Proceedings of 9th International Workshop on Railway Noise, Feldafing, Germany, September 2007.
352. Z. Huang. Theoretical modelling of railway curve squeal. PhD thesis, University of Southampton, 2007.
353. Heckl M.A., Abrahams I.D. Curve squeal of train wheels, Part 1: Mathematical model for its generation. Journal of Sound and Vibration 2000, 229(3):669-693.
354. Heckl M.A. Curve squeal of train wheels, Part 2: Which wheel modes are prone to squeal?. Journal of Sound and Vibration 2000, 229(3):695-707.
355. A.D. Monk-Steel and D.J. Thompson. Models for railway curve squeal noise. Proceedings of Eighth International Conference on Recent Advances in Structural Dynamics, Southampton, 13-16 July 2003.
356. Chiello O., Ayasse J.B., Vincent N., Koch J.R. Curve squeal of urban rolling stock - Part 3: Theoretical model. Journal of Sound and Vibration 2006, 293:710-727.
357. Wu T.X., Thompson D.J. Analysis of lateral vibration behavior of railway track at high frequencies using a continuously supported multiple beam model. Journal of the Acoustical Society of America 1999, 106:1369-1376.
358. Kalker J.J. Three Dimensional Elastic Bodies in Rolling Contact 1990, Kluwer Academic Publishers, Dordrecht.
359. J.T. Nelson. Wheel/rail noise control manual. TCRP Report 23, 1997.
360. Krüger F. Schall- und Erschutterungsschutz im Schienenverkehr 2001, Expert Verlag, Renningen.
361. Müller B., Jansen E., de Beer F.G. Curve squeal WP3 tool box of existing measures. Union Internationale des Chemins de Fer, report prepared by SBB and TNO 2003.
362. Kopp E. Fünf Jahre Erfahrungen mit asymmetrisch geschliffenen Schienenprofilen. Eisenbahn Technische Rundschau 1991, 40:665.
363. Eadie D.T., Santoro M., Powell W. Local control of noise and vibration with Keltrack friction modifier and Protector trackside application: an integrated solution. Journal of Sound and Vibration 2003, 267:761-772.
364. Eadie D.T., Santoro M. Top-of-rail friction control for curve noise mitigation and corrugation rate reduction. Journal of Sound and Vibration 2006, 293:747-757.
365. Matsumoto A., Sato Y., Ono H., Wang Y., Yamamoto M., Tanimoto M., Oka Y. Creep force characteristics between rail and wheel on scaled model. Wear 2002, 253:199-203.
366. Suda Y., et al. Development of onboard friction control. Wear 2005, 258:1109-1114.
367. Jones C.J.C., Thompson D.J. Rolling noise generated by wheels with visco-elastic layers. Journal of Sound and Vibration 2000, 231:779-790.
368. Wetta P., Demilly F. Reduction of wheel squeal noise generated on curves or during braking 1995, 11th International Wheelset Congress, Paris, 301-306.
369. Brunel J.F., Dufrénoy P., Naït M., Muñoz J.L., Demilly F. Transient models for curve squeal noise. Journal of Sound and Vibration 2006, 293:758-765.
370. J.C.O. Nielsen and A. Johansson. Out-of-round railway wheels - a literature survey. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 214F, 79-91, 2000.
371. Vér I.L., Ventres C.S., Myles M.M. Wheel/rail noise, Part II: Impact noise generation by wheel and rail discontinuities. Journal of Sound and Vibration 1976, 46:395-417.
372. Jenkins H.H., Stephenson J.E., Clayton G.A., Morland G.W., Lyon D. The effect of track and vehicle parameters on wheel/rail vertical dynamic forces. REJ January 1974, 2-16.
373. Newton S.G., Clark R.A. An investigation into the dynamic effects on the track of wheelflats on railway vehicles. Journal of Mechanical Engineering Science 1979, 21:287-297.
374. Clark R.A., Dean P.A., Elkins J.A., Newton S.G. An investigation into the dynamic effects of railway vehicles running on corrugated rails. Journal of Mechanical Engineering Science 1982, 24:65-76.
375. Nielson J.C.O., Igeland A. Vertical dynamic interaction between train and track - influence of wheel and track imperfections. Journal of Sound and Vibration 1995, 187:825-839.
376. A. Johansson and J.C.O. Nielsen. Out-of-round railway wheels - wheel-rail contact forces and track response derived from field tests and numerical simulations. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 217F, 135-146, 2003.
377. C. Andersson and T. Dahlberg. Wheel/rail impacts at a railway turnout crossing. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 212F, 123-134, 1998.
378. Wu T.X., Thompson D.J. Theoretical investigation of wheel/rail non-linear interaction due to roughness excitation. Vehicle System Dynamics 2000, 34:261-282.
379. Wu T.X., Thompson D.J. A hybrid model for the noise generation due to railway wheel flats. Journal of Sound and Vibration 2002, 251:115-139.
380. Wu T.X., Thompson D.J. On the impact noise generation due to a wheel passing over rail joints. Journal of Sound and Vibration 2003, 267:485-496.
381. D.J. Thompson and T.X. Wu. The effects of non-linearities at the wheel/rail interface on the generation of rolling noise. Proceedings of Internoise 2001, The Hague, The Netherlands, 129-134, 2001.
382. Wu T.X., Thompson D.J. On the parametric excitation of the wheel/track system. Journal of Sound and Vibration 2004, 278:725-747.
383. D.J. Thompson, T.X. Wu and T.D. Armstrong. Wheel/rail rolling noise - the effects of non-linearities in the contact zone. Proceedings of 10th International Congress on Sound and Vibration, Stockholm, 7-10 July, 2003.
384. T.X. Wu and D.J. Thompson. A model for impact forces and noise generation due to wheel and rail discontinuities. Proceedings of the 8th International Congress on Sound and Vibration, Hong Kong, China, 2905-2912, 2001.
385. Wu T.X., Thompson D.J. Wheel/rail non-linear interaction with coupling between vertical and lateral directions. Vehicle System Dynamics 2004, 41:27-50.
386. T.D. Armstrong. Use of a scale model rig to investigate non-linear wheel/rail interaction. PhD thesis, University of Southampton, 2004.
387. Kurzweil L.G. Prediction and control of noise from railway bridges and tracked transit elevated structures. Journal of Sound and Vibration 1977, 51:419-439.
388. E.E. Ungar and L.E. Wittig. Wayside noise of elevated rail transit structures: analysis of published data and supplementary measurements. US Department of Transportation Report no. UMTA-MA-06-0099-80-6, December 1980.
389. Poisson F., Margiocchi F. The use of dynamic dampers on the rail to reduce the noise of steel railway bridges. Journal of Sound and Vibration 2006, 293:944-952.
390. Janssens M.H.A., Thompson D.J. A calculation model for noise from steel railway bridges. Journal of Sound and Vibration 1996, 193:295-305.
391. M.F. Harrison, D.J. Thompson, and C.J.C. Jones. The calculation of noise from railway viaducts and bridges. Proceedings of the Institution of Mechanical Engineers, Part F (Journal of Rail and Rapid Transit), 214F, 125-134, 2000.
392. Bewes O.G., Thompson D.J., Jones C.J.C., Wang A. Calculation of noise from railway bridges and viaducts: experimental validation of a rapid calculation model. Journal of Sound and Vibration 2006, 293:933-943.
393. Lyon R.H., DeJong R.G. Theory and Application of Statistical Energy Analysis 1995, Butterworth-Heinemann, Boston. 2nd edition.
394. Remington P.J., Wittig L.E. Prediction of the effectiveness of noise control treatments in urban rail elevated structures. Journal of the Acoustical Society of America 1985, 78:2017-2033.
395. O.G. Bewes. The calculation of noise from railway bridges and viaducts. EngD thesis, University of Southampton, 2005.
396. F.J. Fahy. Fundamentals of noise and vibration control, Chapter 5 in Fundamentals of Noise and Vibration. In: F.J. Fahy and J.G. Walker (eds.). Spon Press, 1998.
397. Pinnington R.J. Vibrational power transmission from a finite source beam to infinite receiver beam via a continuous complaint mount. Journal of Sound and Vibration 1990, 137:117-129.
398. Cremer L., Heckl M., Ungar E.E. Structure-borne Sound 1988, Springer. 2nd edition.
399. J.C. Tukker and J.W. Verheij. Noise emission of steel railway bridges. Calculation model for noise reduction measures (in Dutch). TNO report TPD-HAG-RPT-89-0065, November 1989.
400. P. Gardonio and M.J. Brennan. Mobility and impedance methods in structural dynamics, Chapter 9 in Advanced Applications of Acoustics, Noise and Vibration. In: F. Fahy and J. Walker (eds.). E&FN Spon, London, 2004.
401. Stüber C. Air- and structure-borne noise of railways. Journal of Sound and Vibration 1975, 43:281-289.
402. Office for Research and Experiment (ORE) of the International Union of Railways: Question D105, Noise Abatement on Bridges: 1. Report RP1, Noise development in steel railway bridges, 1966.
403. Stüber C. Geräuschentwicklung beim Befahren stählemer Eisenbahnbrücken und Abwehrmassnahmen. Nr. VDI-Berichte 1963, 69.
404. D.C. Herron, A. Wang, D. Rhodes, C.J.C. Jones, D.J. Thompson, and C.M. Nilsson. Modelling railway bridge noise and vibration: application of advanced finite element methods. Proceedings of World Congress on Rail Research, Seoul, Korea, May 2008.
405. R. van Haaren and A. Koopman. Prediction of noise radiation by concrete railway bridges. Proceedings of Internoise 99, Ft Lauderdale, Florida, USA, 1807-1810, 1999.
406. R. van Haaren and S. van Lier. Prediction of noise radiation by concrete and composite railway bridges. Proceedings of Transport Noise 2000, St Petersburg, Russia, 2000.
407. M.G. Dittrich. Application of a fast statistical computational method for assessing the sound transfer of plate-like structures. Proceedings of International Symposium Prediction of the Noise Emitted by Vibrating Structures, Senlis, France, March 1991. Special issue of Revue Française de Mécanique, 391-402, 1991.
408. D.J. Thompson and M.H.A. Janssens. Noise from steel railway bridges - development of the theoretical model, 1991. TNO report TPD-HAG-RPT-92-0077, Delft, 1992.
409. M.H.A. Janssens and D.J. Thompson. Rekenmodel voor geluid van stalen spoorbruggen, ontwikkelingen 1992-1993 (Calculation model for noise from steel railway bridges, developments 1992-1993). TNO report TPD-HAG-RPT-93-0151, Delft, 1993.
410. Maidanik G. Response of ribbed panels to reverberant acoustic fields. Journal of the Acoustical Society of America 1962, 34:809-826.
411. Beranek L.L., Vér I. Noise and Vibration Control Engineering 2005, John Wiley. 2nd edition.
412. A. Putra and D.J. Thompson. The radiation efficiency of point-excited rectangular baffled and unbaffled plates. Proceedings of Institute of Acoustics, Vol. 28, Pt 1, Spring Conference, Southampton, 27-28 March 2006, 465-474.
413. A. Putra and D.J. Thompson. Sound radiation from a perforated unbaffled plate. International Congress on Acoustics, Madrid, 3-7 September 2007.
414. J.T. Nelson. Steel elevated structure noise reduction with resilient rail fasteners at the NYCTA. Proceedings Inter Noise, 90, 395-400, Gothenburg, 1990.
415. Thompson D.J., Verheij J.W. The dynamic behaviour of rail fasteners at high frequencies. Applied Acoustics 1997, 52:1-17.
416. M.H.A. Janssens and M.G. Dittrich. Noise from steel bridges: comparative measurements of different rail fasteners on the bow-bridge in Weesp (in Dutch). TNO report TPD-HAG-RPT-91-0153, March 1992.
417. A. Wang, O.G. Bewes, S.J. Cox, and C.J.C. Jones. Measurement and modelling of noise from the Arsta bridge in Stockholm. Proceedings of 9th International Workshop on Railway Noise, Feldafing, Germany, September 2007.
418. K.P. Köstli, C.J.C. Jones, and D.J. Thompson. Experimental and theoretical analysis of railway bridge noise reduction using resilient rail fasteners in Burgdorf, Switzerland. Proceedings of 9th International Workshop on Railway Noise, Feldafing, Germany, September 2007.
419. Ban Y., Miyamoto T. Noise control of high-speed railways. Journal of Sound and Vibration 1975, 43:273-280.
420. Wettschureck R., Hauck G. Geräusche und Erschutterungen aus dem Schienenverkehr, Chapter 16 in Taschenbuch der Technischen Akustik 1994, Springer-Verlag, Berlin. 2nd edition. M. Heckl, H.A. Muller (Eds.).
421. Hanel J.J., Seeger T. Schalldämpfungsgrossversuch an zwei stählemen Eisenbahn-Hohlkastenbrücken (Full scale tests of sound damping on two steel railway box girder bridges). Der Stahlbau 1978, 47(12):353-361.
422. R. Greer, T. Allett and C. Manning. Channel Tunnel Rail Link Section 2, a review of innovative noise and vibration mitigation. Proceedings of 8th International Workshop on Railway Noise, Buxton, UK, 533-544, September 2004.
423. M.H.A. Janssens, D.J. Thompson, and J.W. Verheij. Application of a calculation model for low noise design of steel railway bridges. Proceedings of Internoise 97, Budapest, 1621-1624, 1997.
424. Bos J. Dutch group cuts steel bridge noise. International Railway Journal September 1997, 15-19.
425. J.H. Cooper and M.F. Harrison. Development of an alternative design for the West Rail viaducts. Proceedings of Institution of Civil Engineers, Transport, 153, 87-95, 2002.
426. Crockett A.R., Pyke J.R. Viaduct design for minimization of direct and structure-radiated train noise. Journal of Sound and Vibration 2000, 231:883-897.
427. R. Müller. Mitigation measures for open lines against vibration and ground-borne noise: a Swiss overview. Springer, Notes on Numerical Fluid Mechanics and Multidisciplinary Design, Noise and Vibration Mitigation for Rail Transportation Systems, 99, 2008.
428. Müller R., Köstli K. Vibration and vibration induced noise immissions from railways: estimation of retrofit costs for Swiss railways 2008, SBB report to Swiss federal office of transport.
429. T. Meloni. Verordnung über den Schutz vor Erschütterungen (VSE). Bauwerksdynamik und Erschütterungsmessung, 10, Symposium, EMPA Dübendorf, 2007.
430. Woodroof H.J., Griffin M.J. A survey of the effect of railway-induced building vibration on the community. ISVR Technical Report no. 1987, 160. University of Southampton.
431. Yokoshima S. A study on factors constituting annoyance due to Shinkansen railway vibration. Journal of Architecture, Planning and Environmental Engineering 1999, 526.
432. Fields J.M., Walker J.G. The effects of railway noise and vibration on the community 1977, Contract report 77/18, ISVR, University of Southampton.
433. Griffin M.J. Handbook of Human Vibration 1990, Academic Press, London.
434. ISO 2631-1: 1997, Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - General requirements. International Organization for Standardization.
435. ISO 2631-2: 2002, Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 2: Vibration in buildings (1 Hz to 80 Hz). International Organization for Standardization.
436. BS 6472: 1992, Evaluation of human exposure to vibration in buildings (1 Hz to 80 Hz), British Standards Institution.
437. BS 6841: 1987, Measurement and evaluation of human exposure to whole-body vibration, mechanical vibration and repeated shock. British Standards Institution.
438. DIN 4150-2: 1999, Structural vibration - Part 2: Human exposure to vibration in buildings, (English version). Deutsches Institut für Normung.
439. DIN 45669-1: 1995, Mechanical vibration and shock measurement - Part 1: Measuring equipment, (English version). Deutsches Institut für Normung.
440. ISO 4866:1990, Mechanical vibration and shock - Vibration of buildings - Guidelines for the measurement of vibrations and evaluation of their effects on buildings. International Organization for Standardization.
441. ISO 4866 - Amendment 2:1996, Mechanical vibration and shock - Vibration of buildings - Guidelines for the measurement of vibrations and their effects on buildings International Organization for Standardization.
442. DIN 4150-3: 1986, Structural vibration in buildings - Effects on structures. Deutsches Institut für Normung.
443. Thompson W.T. Transmission of elastic waves in plane infinite structures. Journal of Applied Physics 1950, 21:89-93.
444. Haskell N.A. The dispersion of surface waves on multilayered media. Bulletin of the Seismological Society of America 1953, 43(1):17-34.
445. Kausel E., Roësset J.M. Stiffness matrices for layered soils. Bulletin of the Seismological Society of America 1981, 71(6):1743-1761.
446. Jones C.J.C. Using numerical models to find antivibration measures for railways. Proceedings of the Institution of Civil Engineers, Transport 1994, 105:43-51.
447. Jones C.J.C., Block J. Prediction of ground vibration from freight trains. Journal of Sound and Vibration 1996, 193(1):205-213.
448. Jones D.V., Le Houdec D., Petyt M. Ground vibrations due to a rectangular harmonic load. Journal of Sound and Vibration 1998, 212(1):61-74.
449. Sheng X., Jones C.J.C., Petyt M. Ground vibration generated by a harmonic load acting on a railway track. Journal of Sound and Vibration 1999, 225(1):3-28.
450. Sheng X., Jones C.J.C., Petyt M. Ground vibration generated by a load moving along a railway track. Journal of Sound and Vibration 1999, 228(1):129-156.
451. Dominguez J. Boundary Elements in Dynamics 1993, Computational Mechanics Publications, Southampton.
452. Jones C.J.C., Thompson D.J., Petyt M. A model for ground vibration from railway tunnels. Proceedings of the Institution of Civil Engineers, Transport 2002, 153(2):121-129.
453. Andersen L. Wave propagation in infinite structures and media 2002, PhD thesis, Aalborg University, Denmark.
454. Andersen L., Jones C.J.C. Coupled boundary and finite element analysis of vibration from railway tunnels - a comparison of two- and three-dimensional models. Journal of Sound and Vibration 2006, 293(3-5):611-625.
455. Tang Y.B., Hung H.H. A 2.5 D finite/infinite element approach for modelling visco-elastic bodies subjected to moving loads. International Journal for Numerical Methods in Engineering 2001, 51:1317-1336.
456. Jean P., Guigou C., Villot M. 2D1/2 BEM model of ground structure interaction. Journal of Building Acoustics 2004, 11(3):157-173.
457. Sheng X., Jones C.J.C., Thompson D.J. Modelling ground vibration from railways using wavenumber finite- and boundary element methods. Proceedings of the Royal Society A 2005, 461:2043-2070.
458. Sheng X., Jones C.J.C., Thompson D.J. Prediction of ground vibration from trains using the wavenumber finite and boundary element methods. Journal of Sound and Vibration 2006, 293(3-5):575-586.
459. Degrande G., Clouteau D., Othman R., Arnst M., Chebli H., Klein R., Chatterjee P., Janssens B. A numerical model for ground-borne vibrations from underground railway traffic based on a periodic finite element-boundary element formulation. Journal of Sound and Vibration 2006, 293(3-5):645-666.
460. Sheng X., Jones C.J.C., Thompson D.J. A theoretical study on the influence of the track on train-induced ground vibration. Journal of Sound and Vibration 2004, 272:909-936.
461. Jones C.J.C., Sheng X., Petyt M. Simulations of ground vibration from a moving harmonic load on a railway track. Journal of Sound and Vibration 2000, 231(3):739-751.
462. Sheng X., Jones C.J.C., Thompson D.J. A comparison of a theoretical model for quasi-statically and dynamically induced environmental vibration from trains with measurements. Journal of Sound and Vibration 2003, 267:621-636.
463. Banverket Seminar on High Speed Lines on Soft Ground, Dynamic Soil-Track Interaction and Groundborne Vibration 2000, produced by the Swedish National Railway Authority, Banverket, Gothenburg, Sweden.
464. Lai C.G., Callerio A., Faccioli E., Martino A. Mathematical modelling of railway-induced ground vibrations. Proceedings of the International Workshop Wave 2000 2000, 99-110.
465. Richart F.E., Hall J.R., Woods R.D. Vibrations of Soils and Foundations 1970, Prentice Hall International Series in Theoretical and Applied Mechanics.
466. Ahmad S., Al-Hussaini T.M. Simplified design for vibration screening by open and in-filled trenches. Proceedings of the ASCE, Journal of Geotechnical Engineering 1991, 117(1):67-88.
467. Yang Y., Hung H.H. A parametric study of wave barriers for reduction of train-induced vibrations. International Journal for Numerical Methods in Engineering 1997, 40(20):3729-3747.
468. May T., Bolt B.A. The effectiveness of trenches in reducing seismic motion. Earthquake Engineering and Structural Dynamics 1982, 10(2):195-210.
469. Hung H.H., Yang Y.B., Chang D.W. Wave barriers for the reduction of train-induced vibrations in soils. Journal of Geotechnical and Geo-environmental Engineering 2004, 130(12):1283-1291.
470. Takemiya H., Fujiwara A. Wave propagation/impediment in a stratum and wave impeding block (WIB) measured for SSI response reduction. Soil Dynamics and Earthquake Engineering 1994, 13:49-61.
471. Schmid G., Chouw N., Le R. Shielding of structures from soil vibrations. Proceedings of Soil Dynamics and Earthquake Engineering V 1992, Computational Mechanics Publications, 651-662.
472. Peplow A.T., Jones C.J.C., Petyt M. Surface vibration propagation over a layered elastic half-space with an inclusion. Applied Acoustics 1999, 56(4):283-296.
473. Takemiya H., Chouw N., Schmid G. Wave impeding block (WIB) for response reduction of soil-structure under train induced vibrations. 10th European Conference on Earthquake Engineering 1995, Balkema, Rotterdam. Duma (Ed.).
474. Peplow A.T., Kaynia A.M. Prediction and validation of traffic vibration reduction due to cement column stabilization. Soil Dynamics and Earthquake Engineering 2007, 27:793-802.
475. Vickers R.L. DC Electric Locomotives and Trains in the British Isles. David and Charles. Newton Abbot 1986, 25-26.
476. Ford R.A.J. The prediction of ground vibrations by railway trains. Journal of Sound and Vibration 1987, 116(3):585-589.
477. J.W. Edwards. Survey of environmental noise and vibration from London Underground trains. Proceedings of Internoise '96, 2029-2032, 1996.
478. US Department of Transportation. Transit Noise and Vibration Impact Assessment, April 1995, DOT-T-95-16.
479. Walker J.G., Chan M.F.K. Human response to structurally radiated noise due to underground railway operations. Journal of Sound and Vibration 1996, 193:49-63.
480. Vadillo E.G., Herreros J., Walker J.G. Subjective reaction to structurally radiated sound from underground railways: field results. Journal of Sound and Vibration 1996, 193:65-74.
481. C.J.C. Jones, D.J. Thompson and M. Petyt. A model for ground vibration from railway tunnels. Proceedings of the Institution of Civil Engineers, Transportation, 153, 121-129, 2002.
482. Andersen L., Jones C.J.C. Coupled boundary and finite element analysis of vibration from railway tunnels - a comparison of two- and three-dimensional models. Journal of Sound and Vibration 2006, 293:611-625.
483. X. Sheng, C.J.C. Jones and D.J. Thompson. Modelling ground vibration from tunnels using wavenumber finite and boundary element methods. Proceedings of the Royal Society A 461, 2043-2070, 2005.
484. Sheng X., Jones C.J.C., Thompson D.J. Prediction of ground vibration from trains using the wavenumber finite and boundary element methods. Journal of Sound and Vibration 2006, 293:575-586.
485. Degrande G., Clouteau D., Othman R., Arnst M., Chebli H., Klein R., Chatterjee P., Janssens B. A numerical model for ground-borne vibrations from underground railway traffic based on a periodic finite element-boundary element formulation. Journal of Sound and Vibration 2006, 293:645-666.
486. Yang Y.B., Hung H.H. A 2.5 D finite/infinite element approach for modelling visco-elastic bodies subjected to moving loads. International Journal for Numerical Methods in Engineering 2001, 51:1317-1336.
487. Jean P., Guigou C., Villot M. 2D1/2 BEM model of ground structure interaction. Journal of Building Acoustics 2004, 11:157-173.
488. H.J. Saurenman, J.T. Nelson and G.P. Wilson. Handbook of Urban Rail Noise and Vibration Control, Report DOT-TSC-UMTA-81-72. US Department of Transportation, Urban Mass Transportation Administration, 1982.
489. Craik R.J.M. Sound Transmission through Buildings using Statistical Energy Analysis 1996, Gower, Aldershot, UK.
490. Hassan O.A.B. Transmission of structure-borne sound in buildings above railway tunnels. Journal of Building Acoustics 2001, 8:269-299.
491. Bies D.A., Hansen C.H. Engineering Noise Control, Theory and Practice 2003, Spon Press, London. 3rd edition.
492. H-G. Wagner and A. Herrmann. Floating slab track above ground for turnouts in tram lines, in Noise and vibration mitigation for rail transportation systems, ed. B. Schulte-Werning et al. Proceedings of the 9th International Workshop on Railway Noise, Munich, Germany, Springer, Berlin, 86-93, 2008.
493. A.E.J. Hardy and R.R.K. Jones. Control of the noise environment for passengers in railway vehicles. Proceedings of the Institution of Mechanical Engineers, 203F, 79-85, 1989.
494. EN ISO 3381, Railway applications - Acoustics - Measurement of noise inside railbound vehicles. International Standards Organization. ISO 2005, 3381.
495. EN ISO 3095, Railway applications - Acoustics - Measurement of noise emitted by railbound vehicles. International Standards Organization. ISO 2005, 3095.
496. Eade P.W., Hardy A.E.J. Railway vehicle internal noise. Journal of Sound and Vibration 1977, 51:403-415.
497. A.E.J. Hardy. Railway passengers and noise. Proceedings of the Institution of Mechanical Engineers, 213F, 173-180, 1999.
498. Hardy A.E.J. Measurement and assessment of noise within passenger trains. Journal of Sound and Vibration 2000, 231:819-829.
499. D.J. Thompson and C.J.C. Jones. Noise and vibration from railway vehicles, Chapter 10 in Handbook of Railway Vehicle Dynamics, S. Iwnicki ed. CRC Press, Taylor and Francis, Boca Raton, 279-325. 2006.
500. de Beer F., Verheij J.W. Experimental determination of pass-by noise contributions from the bogies and superstructure of a freight wagon. Journal of Sound and Vibration 2000, 231:639-652.
501. Corcos M. The resolution of turbulent pressure at the wall of a boundary layer. Journal of Sound and Vibration 1967, 6:59-70.
502. German-French Cooperation Deufrako Annex K2, 1999, Noise sources from high speed guided transport, final report.
503. D.J. Thompson and J. Dixon. Vehicle noise, Chapter 6 in Advanced Applications in Acoustics, Noise and Vibration, eds. F. Fahy and J. Walker. Spon Press, London, 2004.
504. Färm J. Interior structure-borne sound caused by the sleeper-passing frequency. Journal of Sound and Vibration 2000, 231:831-837.
505. Johansson A. Out-of-round railway wheels - assessment of wheel tread irregularities in train traffic. Journal of Sound and Vibration 2006, 293:795-806.
506. Fundamentals of Noise and Vibration 1998, E&FN Spon, London. F. Fahy, J. Walker (Eds.).
507. Bies D.A., Hansen C.H. Engineering Noise Control, Theory and Practice 2003, Spon Press, London. 3rd edition.
508. N.J. Shaw. The prediction of railway vehicle internal noise using statistical energy analysis techniques. MSc dissertation, Heriot-Watt University, 1990.
509. T. Kohrs. Structural acoustic investigation of orthotropic plates, Diploma Thesis, TU Berlin, 2002.
510. A. Bracciali and C. Pellegrini. FEM analysis of the internal acoustics of a railway vehicle and its improvements. Proceedings WCRR 97, Florence, November 1997.
511. Létourneux F., Guerrand S., Poisson F. Low-frequency acoustic transmission of high-speed trains: simplified vibroacoustic model. Journal of Sound and Vibration 2000, 231:847-851.
512. Stegeman B. Development and validation of a vibroacoustic model of a metro rail car using Statistical Energy Analysis (SEA). MSc dissertation 2002, Chalmers University, Gothenburg, Sweden.
513. K. de Meester, L. Hermans, K. Wyckaert and N. Cuny. Experimental SEA on a highspeed train carriage. Proceedings ISMA21, Leuven, Belgium, 151-161, 1996.
514. P. Geissler and D. Neumann. SEA modelling for extruded profiles for railway passenger coaches. Euro-Noise 98, München, Germany, 189-194, 1998.
515. Xie G., Thompson D.J., Jones C.J.C. A modelling approach for the vibroacoustic behaviour of aluminium extrusions used in railway vehicles. Journal of Sound and Vibration 2006, 293:921-932.
516. D. Backström. Analysis of the sound transmission loss of train partitions. MSc dissertation, KTH Stockholm, 2001.
517. Elliott S.J., Nelson P.A. Active noise control. Advanced Applications in Acoustics, Noise and Vibration 2004, Spon Press, London. F. Fahy, J. Walker (Eds.).
518. T. Loizeau and F. Poisson, Acoustic active control inside a locomotive cabin. Proc. World Congress on Railway Research, Montreal, Canada, 2006.
519. Fodiman P., Staiger M. Improvement of the noise technical specifications for interoperability: the input of the Noemie project. Journal of Sound and Vibration 2006, 293:475-484.
520. International standard 'Acoustics - Measurements of noise emitted by railbound vehicles', ISO 3095-1975.
521. International standard 'Railway applications - Acoustics - Measurements of noise emitted by railbound vehicles', ISO 3095:2005.
522. Commission decision of 30 May 2002 concerning the technical specification for interoperability relating to the rolling stock subsystem of the trans-European high-speed rail system referred to in Article 6(1) of Directive 96/48/EC, reference 2002/735/EC. Official Journal of the European Communities September 2002, 12.
523. Directive 2001/16/EC of the European parliament and of the Council of 19 March 2001 on the interoperability of the trans-European conventional rail system. Official Journal of the European Communities April 2001, 2.