Advances in engineered surfaces for functional performance

CIRP Annals - Manufacturing Technology

Volumn 57, Issue 2, 2008, Pages 750-769

  Bruzzone, A A G ^a   Costa, H L ^b   Lonardo, P M ^a   Lucca, D A ^c  

^a UNIVERSITY OF GENOA   (Italy)

^b FEDERAL UNIVERSITY OF UBERLÂNDIA   (Brazil)

^c Oklahoma State University   (United States)

Author keywords

Engineered surface; Engineering technology; Surface

Indexed keywords

BIOMIMETICS; SURFACE CHEMISTRY; SURFACE PHENOMENA;

ENGINEERED SURFACE; ENGINEERED SURFACES; ENGINEERING PARTS; FUNCTIONAL PERFORMANCES; FUNCTIONAL SURFACES; STATE OF THE ARTS; SURFACE CHARACTERISTICS;

SURFACE PROPERTIES;

EID: 55949092598     PISSN: 00078506     EISSN: 17260604     Source Type: Journal    
DOI: 10.1016/j.cirp.2008.09.003     Document Type: Article

References (252)

1. Achtsnick M., Drabbe J., Hoogstrate A.M., and Karpuchewski B. Erosion Behaviour and Pattern Transfer Accuracy of Protecting Masks for Micro-Abrasive Blasting. Journal of Materials Processing Technology 149 (2004) 43-49
2. Affymetrix, www.Affymetrix.com, 15th September 2008.
3. Aggarwal J., Kotlicki A., Mossman M., and Whitehead L. Liquid Transport Based on Electrostatic Deformation of Fluid Interfaces. Journal of Applied Physics 99 (2006) 104-904
4. Albert W.A.J. Über Treibseile am Harz. Archive für Mineralogie Geognosie Bergbau und Hüttenkunde 10 (1838) 215-234
5. Alting L., Kimura F., Hansen H.N., and Bissacco G. Micro Engineering. Annals of the CIRP 52 2 (2003) 635-657
6. Amon C.H., Yao S.C., Wu C.F., and Hsieh C.C. Microelectromechanical System-based Evaporative Thermal Management of High Heat Flux Electronics. Journal of Heat Transfer-Transactions of the ASME 127 1 (2005) 66-75
7. Aramaki H., Cheng H.S., and Chung Y.W. The Contact Between Rough Surfaces with Longitudinal Texture-Part I. Average Contact Pressure and Real Contact Area. Journal of Tribology-Transactions of the ASME 115 3 (1993) 419-424
8. Aravanis A.M., Debusschere B.D., Chruscinski A.J., Gilchrist K.H., Kobilka B.K., and Kovacs G.T.A. A Genetically Engineered Cell-based Biosensor for Functional Classification of Agents. Biosensors & Bioelectronics 16 7-8 (2001) 571-577
9. Arzpeyma A., Bhaseen S., Dolatabadi A., and Wood-Adams P. A Coupled Electro-Hydrodynamic Numerical Modeling of Droplet Actuation by Electrowetting. Colloids and Surfaces A: Physicochemical and Engineering Aspects 323 1-3 (2007) 28-35
10. Asakura H., Nakajima A., Sakai M., Suzuki S., Kameshima Y., and Okada K. Deformation and Motion by Gravity and Magnetic Field of a Droplet of Water-based Magnetic Fluid on a Hydrophobic Surface. Applied Surface Science 253 6 (2007) 3098-3102
11. Aspinwall D.K., Wise M.L.H., Stout K.J., Goh T.H.A., Zhao F.L., and El-Menshawy M.F. Electrical Discharge Texturing. Journal of Machine Tools & Manufacture 32 12 (1992) 183-193
12. Barthlott W., and Neinhuis C. Purity of the Sacred Lotus, or Escape from Contamination in Biological Surfaces. Planta 202 1 (1997) 1-8
13. Bartz M., Terfort A., Knoll W., and Tremel W. Stamping of Monomeric SAMs as a Route to Structured Crystallisation Templates: Patterned Titania Films. Chemistry-A European Journal 6 22 (2000) 4149-4153
14. Batalha G.F., and Stipkovic M. Quantitative Characterization of the Surface Topography of Cold Rolled Sheets-New Approaches and Possibilities. Journal of Materials Processing Technology 113 1-3 (2001) 732-738
15. Baudoin R., Griscom L., Monge M., Legallais C., and Leclerc E. Development of a Renal Microchip for In Vitro Distal Tubule Models. Biotechnology Progress 23 5 (2007) 1245-1253
16. Becker E.P., and Ludema K.C. A Qualitative Empirical Model of Cylinder Bore Wear. Wear 225-229 (1999) 387-404
17. Bennet H.E., and Porteus J.O. Relation Between Surface Roughness and Specular Reflectance at Normal Incidence. Journal of the Optical Society of America 51 (1961) 123-129
18. Berenson P.J. Experiments on pool boiling heat transfer. International Journal of Heat and Mass Transfer 5 (1962) 985-999
19. Berge B. Electrocapillarité et mouillage de films isolants par l'eau. C.R.A.S. III 317 (1993) 157-163
20. Bico J., Thiele U., and Quere D. Wetting of Textured Surfaces. Colloids and Surfaces A 206 1-3 (2002) 41-46
21. Binnig G., Quate C.F., and Gerber C. Atomic Force Microscope. Physical Review Letters 56 9 (1986) 930-933
22. Blatter A., Maillat M., Pimenov S.M., Shafeeev G.A., Simakin A.V., and Loubnin E.N. Lubricated Sliding Performance of Laser-Patterned Sapphire. Wear 232 2 (1999) 226-230
23. Blau P.J., Qu J., and Riester L. Effects of Laser Surface Texturing on the Microstructure and Frictional Characteristics of Zirconia Surfaces Under Liquid and Solid Lubrication (2005), World Tribology Congress, Washington pp. 311-312
24. Bouzakis K.D., and Michailidis N. Deviations in Determining Coatings' and Other Materials' Mechanical Properties, When Considering Different Indenter Tip Geometries and Calibration Procedures. Surface & Coatings Technology 202 4-7 (2007) 1108-1112
25. Bowden N., Terfort A., Carbeck J., and Whitesides G.M. Self-Assembly of Mesoscale Objects into Ordered Two-Dimensional Arrays. Science 276 5310 (1997) 232-235
26. Brinksmeier E. State-of-the-Art of Non-Destructive Measurement of Sub-Surface Material Properties and Damages. Precision Engineering-Journal of the American Society for Precision Engineering 11 4 (1989) 211-224
27. Brinksmeier E., Gläbe R., and Lünemann B. Diamond Machining of Diffractive Optical Patterns by Using a Nanometer-Stroke Fast Tool Servo. Proceedings of the 7th EUSPEN International Conference. Bremen (2007) 285-289
28. Brinksmeier E., Gläbe R., Riemer O., and Twardy S. Precision Cutting Processes for the Manufacture of Micro Molds. Proceedings of the 2nd International Conference on New Forming Technology. Bremen (2007) 1-13
29. Brinksmeier E., Lucca D.A., and Walter A. Chemical Aspects of Machining Processes. Annals of the CIRP 53 2 (2004) 685-699
30. Brinksmeier E., Preuß W., and Schmütz J. Manufacture of Microstructures by Diamond Machining. Proceedings of 9th IPES/UME 4 International Conference. Braunschweig (1997) 503-507
31. Broughton J.Q., Abraham F.F., Bernstein N., and Kaxiras E. Concurrent Coupling of Length Scales: Methodology and Application. Physical Review B 60 4 (1999) 2391-2403
32. Bruzzone A.A.G., Pantani A., Ferrando A., and Lonardo P.M. Aluminium Joining with Structural Adhesives for Automotive Applications. Proceedings of 6th AITEM Conference. Gaeta (2003) 15-26
33. Brzoska J.B., Brochardwyart F., and Rondelez F. Motions of Droplets on Hydrophobic Model Surfaces Induced by Thermal Gradients. Langmuir 9 8 (1993) 2220-2224
34. Buguin A., Talini L., and Silberzan P. Ratchet-like Topological Structures for the Control of Microdrops. Applied Physics A-Materials Science & Processing 75 2 (2002) 207-212
35. Bulatov V.P., Krasny V.A., and Schneider Y.G. Basics of Machining Methods to Yield Wear- and Fretting-Resistive Surfaces, Having Regular Roughness Patterns. Wear 208 (1997) 132-137
36. 2-Coatings with Nanoscale Surface Topographies. Surface & Coatings Technology 200 5-6 (2005) 1555-1559
37. Chang W.R., Etsion I., and Bogy D.B. An Elastic-Plastic Model for the Contact of Rough Surfaces. Journal of Tribology-Transactions of the ASME 109 2 (1987) 257-263
38. Chaudhury M.K., and Whitesides G.M. How to Make Water Run Uphill. Science 256 5063 (1992) 1539-1541
39. Chien L.H., and Webb R.L. A Parametric Study of Nucleate Boiling on Structured Surfaces. Part I. Effect of Tunnel Dimensions. Journal of Heat Transfer 120 (1998) 1042-1048
40. Chinga G., Johnsen P.O., Dougherty R., Berli E.L., and Walter J. Quantification of the 3D Microstructure of SC Surfaces. Journal of Microscopy-Oxford 227 3 (2007) 254-265
41. Choi K.H., Meijer J., Masuzawa T., and Kim D. Excimer Laser Machining for 3D Microstructure. Journal of Materials Processing Technology 149 (2004) 561-566
42. Cognard J. Some Recent Progress in Adhesion Technology and Science. Comptes Rendus Chimie 9 (2006) 13-24
43. Columbus RL (1980) Liquid Transport Device and Method, Patent US 4,233,029.
44. Corbett J., Mckeown P.A., Peggs G.N., and Whatmore R. Nanotechnology: International Developments and Emerging Products. Annals of the CIRP 49 2 (2000) 523-545
45. Corty C., and Foust A.S. Surface Variables in Nucleate Boiling. Chemical Engineering Progress, Symposium Series 51 (1955) 1-12
46. Costa HL (2005) Modification of Surface Topography: Manufacturing Methods and Applications, PhD Thesis, University of Cambridge, p. 240.
47. Costa H.L., and Hutchings I.M. Hydrodynamic Lubrication of Textured Steel Surfaces Under Reciprocating Sliding Conditions. Tribology International 40 (2007) 1227-1238
48. Costa H.L., and Hutchings I.M. Effects of Die Surface Patterning on Lubrication in Strip Drawing. Journal of Materials Processing and Technology (2008) 10.1016/j.jmatprotec.2008.03.026
49. Costa H.L., and Hutchings I.M. Inkjet Printing for Patterning Engineering Surfaces. Proceedings of 24th Conference on Digital Fabrication. Pittsburgh (2008) 256-259
50. Coursey J., Kim J., and Kiger K.T. Spray Cooling of High Aspect Ratio Open Microchannels (2006), ITHERM 2006, San Diego, CA pp. 188-195
51. Cubaud T., Ulmanella U., and Ho C.M. Two-Phase Flow in Microchannels With Surface Modifications. Fluid Dynamics Research 38 (2006) 772-786
52. Czichos H. Tribology and Its Many Facets: From Macroscopic to Microscopic and Nano-Scale Phenomena. Meccanica 36 (2001) 605-615
53. Da Silva WM, De Mello JDB (in press) Using parallel scratches to simulate abrasive wear, in: Proceedings of 1st International Conference on Abrasive Processes (ICAP), Cambridge the 21-25 September 2008, www.icap.elsevier.com.
54. Daniel J.H., Moore D.F., and Walker J.F. Focused Ion Beams and Silicon-on-Insulator: A Novel Approach to MEMS. Smart Materials & Structures 9 (2000) 284-290
55. Danzebrink H.U., Koenders L., Wilkening G., Yacoot A., and Kunzmann H. Advances in Scanning Force Microscopy for Dimensional Metrology. Annals of the CIRP 55 2 (2006) 841-878
56. Das A.K., Das P.K., Bhattacharyya S., and Saha P. Nucleate Boiling Heat Transfer from a Structured Surface-Effect of Liquid Intake. International Journal of Heat and Mass Transfer 50 (2007) 1577-1591
57. Das A.K., Das P.K., and Sahaa P. Nucleate Boiling of Water from Plain and Structured Surfaces. Experimental Thermal and Fluid Science 31 (2007) 967-977
58. Datta M. Fabrication of an Array of Precision Nozzles by Through-Mask Electrochemical Machining. Journal of Electrochemical Society 142 (1995) 3801-3806
59. Day M., and Weck M. Ultraprecision Milling and Planning Machine for Large Workpieces. Proceedings of 3rd EUSPEN International Conference. Eindhoven (2002) 345-349
60. De Assis T.A., Mota F.D., Miranda J.G.V., Andrade R.F.S., and De Castilho C.M.C. Field and Electric Potential of Conductors with Fractal Geometry. Journal of Physics-Condensed Matter 19 47 (2007) 476215
61. De Chiffre L., Kunzmann H., Peggs G.N., and Lucca D.A. Surfaces in Precision Engineering, Microengineering and Nanotechnology. Annals of the CIRP 52 2 (2003) 561-577
62. De Chiffre L., Lonardo P.M., Trumpold H., Lucca D.A., Goch G., Brown C.A., Raja J., and Hansen H.N. Quantitative Characterisation of Surface Texture. Annals of the CIRP 49 2 (2000) 635-652
63. De Mestral G, Pramgins Y (1955) Velvet Type Fabric and Method of Producing Same, Patent US 2,717,437.
64. De Soete D., Pans D., and Steinhoff K. EBT Technology and its Applications. Iron and Steel Engineering 74 9 (1997) 36-40
65. Decker C.A., and Mackin T.J. Measuring Film Thickness Using Infrared Imaging. Thin Solid Films 473 2 (2005) 196-200
66. Defourny J., and Jodogne P. Lasertex, A Concept of Roughness-From the Rolling-Mill to the Coated Sheet. La Revue de Metallurgie 89 5 (1992) 439-446
67. Deng T., Wu H., Brittain S.T., and Whitesides G.M. Prototyping of Masks, Masters and Stamps/Molds for Soft Lithography Using an Office Printer and Photographic Reduction. Analytical Chemistry 72 14 (2000) 3176-3180
68. Dienwiebel M., and Pohlmann K. Nanoscale Evolution of Sliding Metal Surfaces During Running-In. Tribology Letters 27 3 (2007) 255-260
69. Dimitrov A.S., and Nagayama K. Continuous Convective Assembling of Fine Particles into Two-Dimensional Arrays on Solid Surfaces. Langmuir 12 5 (1996) 1303-1311
70. Dornfeld D., Min S., and Takeuchi Y. Recent Advances in Mechanical Micromachining. Annals of the CIRP 55 2 (2006) 745-768
71. Dos Santos D.S., Cardoso M.R., Leite F.L., Aroca R.F., Mattoso L.H.C., Oliveira O.N., and Mendonca C.R. The Role of Azopolymer/Dendrimer Layer-by-Layer Film Architecture in Photoinduced Birefringence and the Formation of Surface-Relief Gratings. Langmuir 22 14 (2006) 6177-6180
72. Dubrujeaud B., Vardavoulias M., and Jeandin M. The Role of Porosity in Dry Sliding Wear of a Sintered Ferrous. Wear 174 (1994) 155-161
73. Dumitru G., Romano V., Weber H.P., Haefke H., Gerbig Y., and Pfluger E. Laser Microstructuring of Steel Surfaces for Tribological Applications. Applied Physics A 70 (2000) 485-487
74. Elber W. The Significance of Fatigue Crack Closure, Damage Tolerance in Aircraft Structures. ASTM STP 486 (1971) 230-242
75. Elcoate C.D., Evans H.P., Hughes T.G., and Snidle R.W. Thin Film, Time Dependent, Micro-EHL Solutions with Real Surface Roughness. In: Dowson D.E.A. (Ed). Lubrication at the Frontier (1999), Elsevier 163-174
76. Emge A., Karthikeyan S., Kim H.J., and Rigney D.A. The Effect of Sliding Velocity on the Tribological Behavior of Copper. Wear 263 (2007) 614-618
77. Erdemir A. Review of Engineered Tribological Interfaces for Improved Boundary Lubrication. Tribology International 38 3 (2005) 249-256
78. Evans C.J., and Bryan J.B. Structured, Textured or Engineered Surfaces. Annals of the CIRP 48 2 (1999) 541-556
79. Fadeai-Tehrani A., and Imanian E. A New Etchant for the Chemical Machining of St304. Journal of Materials Processing Technology 149 (2004) 404-408
80. Falconnet D., Csucs G., Grandin H.M., and Textor M. Surface Engineering Approaches to Micropattern Surfaces for Cell-based Arrays. Biomaterials 27 (2006) 3044-3063
81. Fang F.Z., Zhang X.D., and Hu X.T. Cylindrical Coordinate Machining of Optical Freeform Surfaces. Optics Express 16 (2008) 7323-7329
82. Fletcher D.I., Kapoor A., Steinhoff K., and Schuleit N. Wear BEhaviour and Surface form Evaluation of a Novel Titanium Carbide Implanted Surface Under Lubricated Conditions. Proceedings of the Institution of Mechanical Engineers (2000) 597-610 214/J
83. Flucke C., Gläbe R., and Brinksmeier E. Manufacturing of Moulds for the Replication of Prismatic Microstructures by a Novel Diamond Cutting Process. Industrial Diamond Review 67 (2007) 25-30
84. Fonte M., Romeiro F., and Freitas M. Environment Effects and Surface Roughness on Fatigue Crack Growth at Negative R-Ratios. International Journal of Fatigue 29 (2007) 1971-1977
85. Franks W., Tosatti S., Heer F., Seif P., Textor M., and Hierlemann A. Patterned Cell Adhesion by Self-assembled Structures for use with a CMOS Cell-based Biosensor. Biosensors & Bioelectronics 22 (2007) 1426-1433
86. Fu Y.H., Ye Y.X., Zhang Y.K., and Cai L. The Technology of Laser Honing Applied in Distinctively Improving the Lubrication of Frictional Units. Key Engineering Materials 202-203 (2001) 265-270
87. Furmidge C.G.L. Studies at Phase Interfaces. I. The Sliding of Liquid Drops on Solid Surfaces and a Theory for Spray Retention. Journal of Colloid Science 17 (1961) 309-324
88. Gad-El-Hak M. The Fluid Mechanics of Microdevices-The Freeman Scholar Lecture. Journal of Fluids Engineering 121 (1999) 5-33
89. Gadelmawla E.S., Koura M.M., Maksoud T.M.A., Elewa I.M., and Soliman H.H. Roughness Parameters. Journal of Materials Processing Technology 123 1 (2002) 133-145
90. Gegeckaite A., Hansen H.N., De Chiffre L., and Pocius P. Handling of Micro Objects: Investigation of Mechanical Gripper Functional Surfaces. Proceedings of 7th EUSPEN International Conference. Bremen (2007) 185-188
91. Geiger M., Kleiner M., Eckstein R., Tiesler N., and Engel U. Microforming. Annals of the CIRP 50 2 (2001) 445-462
92. Geiger M., Roth S., and Becker W. Influence of Laser-Produced Microstructures on the Tribological Behaviour of Ceramics. Surface & Coatings Technology 100-101 (1998) 17-22
93. Gengenbach T.R., Xie X.M., Chatelier R.C., and Griesser H.J. Evolution of the Surface-Composition and Topography of Perfluorinated Polymers Following Ammonia-Plasma Treatment. Journal of Adhesion Science and Technology 8 4 (1994) 305-328
94. Gordon N., Starosvetsky D., and Ein-Eli Y. Negative Potential Dissolution (NPD)-Advanced and Rapid Texturing Method of As-Cut Silicon. Electrochimica Acta 50 27 (2005) 5313-5321
95. Gray S.A., Kusel J.K., Shaffer K., Shubin Y.S., Stenger D.A., and Pancrazio J.J. Design and Demonstration of an Automated Cell-based Biosensor. Biosensors & Bioelectronics 16 (2001) 535-542
96. Greenwood J.A., and Williamson J.P.B. Contact of Nominally Flat Surfaces. Proceedings of the Royal Society of London Series A 295 (1966) 300-319
97. Griffith P., and Wallis J.D. The Role of Surface Conditions in Nucleate Boiling. Chemical Engineering Progress, Symposium Series 56 (1960) 49-63
98. Gross P.G., Kartalov E.P., Schererc A., and Weiner L.P. Applications of Microfluidics for Neuronal Studies. Journal of the Neurological Sciences 252 (2007) 135-143
99. Grzesik W., and Wanat T. Comparative Assessment of Surface Roughness Produced by Hard Machining with Mixed Ceramic Tools Including 2D and 3D Analysis. Journal of Materials Processing Technology 169 3 (2005) 364-371
100. Gutierrez-Mora F., Erdemir A., Goretta K.C., Dominguez-Rodriguez A., and Routbort J.L. Dry and Oil-Lubricated Sliding Wear of Si3N4 and Si3N4/BN Fibrous Monoliths. Tribology Letters 18 2 (2005) 231-237
101. Halling J. Introduction to Tribology (1976), Wykeham Publications, London
102. Hamilton D.B., Walowit J.A., and Allen C.M. A Theory of Lubrication by Micro-Irregularities. Journal of Basic Engineering-Transactions of the ASME (1966) 177-185
103. Hammersley G., Hackel L.A., and Harris F. Surface Prestressing to Improve Fatigue Strength of Components by Laser Shot Peening. Optics and Lasers in Engineering 34 (2000) 327-337
104. Hermann K. CIRP International Comparison on Nanoindentation. CIRP STC-S Meeting. Paris, January 26 (2007)
105. Heuberger M., Feldman K., Zach M., and Spencer N.D. Dynamic Control of Friction via Surface Structuring. In: Dowson D. (Ed). Boundary and Mixed Lubrication: Science and Applications (2002), Elsevier 67-73
106. Higashiyama Y., Yamada T., and Sugimoto T. Vibration of Water Droplet Located on a Hydrophobic Sheet Under the Tangential AC Field. Conference Rec. IAS 1999 Annual Meeting. Phoenix (1999) 1825-1830
107. Higashiyama Y., Yanase S., and Sugimoto T. Behavior of Water Droplets Located on a Hydrophobic Insulating Plate under DC Field. Conference Rec. IAS 1998 Annual Meeting. St. Louis (1998) 1808-1813
108. Hocken R.J., Chakraborty N., and Brown C. Optical Metrology of Surfaces. Annals of the CIRP 54 2 (2005) 705-719
109. Holmberg K., Ronkainen H., Laukkanen A., and Wallin K. Friction and Wear of Coated Surfaces-Scales, Modelling and Simulation of Tribomechanisms. Surface & Coatings Technology 202 4-7 (2007) 1034-1049
110. Horng J.H., Lin J.F., and Lee K.Y. The Effect of Surface Irregularities on the Tribological Bahaviour of Steel Rollers Under Rolling-Sliding Contact. Journal of Tribology-Transactions of the ASME 116 (1994) 209-218
111. Hsieh C.C., and Yao S.C. Evaporative Heat Transfer Characteristics of a Water Spray on Micro-Structured Silicon Surfaces. International Journal of Heat and Mass Transfer 49 (2006) 962-974
112. Hu G., and Li D. Multiscale Phenomena in Microfluidics and Nanofluidics. Chemical Engineering Science 62 (2007) 3443-3454
113. Hua M., Tam H.Y., Ma H.Y., and Mok C.K. Patterned PVD TiN Spot Coatings on M2 Steel: Tribological Behaviors Under Different Sliding Speeds. Wear 260 11-12 (2006) 1153-1165
114. Hupp S.J., and Hart D.P. Quantifying the Effect of Lubricant Elasticity on Microtextured Surfaces. World Tribology Congress III. Washington (2005) 483-484
115. Hutchings I.M. Tribology-Friction and Wear of Engineering Materials (1992), Arnold, London
116. Hwang U.P., and Moran K.F. Boiling Heat Transfer of Silicon Integrated Circuits Chip Mounted on a Substrate. ASME HTD 20 (1981) 53-59
117. Ichimura K., Sang-Kenn O., and Nakagawa M. Light-driven Motion of Liquids on a Photoresponsive Surface. Science 288 (2000) 1624-1626
118. Ikawa N., Donaldson R.R., Komanduri R., König W., Mckeown P.A., Moriwaki T., and Stowers I.F. Ultraprecision Metal Cutting, The Past, The Present and The Future. Annals of the CIRP 40 2 (1991) 584-597
119. Infineon, http://www.infineon.com, September 15th 2008.
120. Ishibashi K (1993) Methods for Treating the Surface of a Solid Body, Patent US 5,198,073.
121. ISO14577, Metallic Materials-Instrumented Indentation Test for Hardness and Materials Parameters, Part 1. Test Method, 2002, Part 2. Verification and Calibration of Testing Machines, 2002, Part 3. Calibration of Reference Blocks, Part 4. Test Method for Metallic and Non-Metallic Coatings, 2007.
122. Jakob M. Heat Transfer (1949), John Wiley & Sons, New York pp. 636-638
123. Jeng Y.R. Impact of Plateau Surfaces on Tribological Performance. Tribology Transactions 39 2 (1996) 354-361
124. Jeon N.L., Dertinger S.K.W., Chiu D.T., Choi I.S., Stroock A.D., and Whitesides G.M. Generation of Solution and Surface Gradients Using Microfluidic Systems. Langmuir 16 (2000) 8311-8316
125. Jiang X., Scott P.J., Whitehouse D.J., and Blunt L. Paradigm Shifts in Surface Metrology. Part II. The Current Shift. Proceedings of the Royal Society A 463 (2007) 2071-2099
126. Jones T.B., Gunji M., Washizu M., and Feldman M.J. Dielectrophoretic Liquid Actuation and Nanodroplet Formation. Journal of Applied Physics 89 (2001) 1441-1448
127. Jost H.P. Lubrication (Tribology)-A Report on the Present Position and Industry's Needs (1966) pp. 1-79
128. Jost H.P. Tribology-Origin and Future. Wear 136 1 (1990) 1-17
129. Kalvala PR, Beesabathina DP, Wiedemann KE (1999) Process for Forming a Wear-Resistant Coating that Minimizes Debris, US Patent 5,955,145.
130. Kaneta M., and Nishikawa H. Experimental Study on Micro-EHL. Proceedings of the Institution of Mechanical Engineers (1999) 371-381 213/J
131. Kim D.E., Cha K.H., and Sung I.H. Design of Surface Micro-Structures for Friction Control in Micro-Systems Applications. Annals of the CIRP 51 1 (2002) 495-498
132. Kim J. Spray Cooling Heat Transfer: The State of the Art. International Journal of Heat and Fluid Flow 28 (2007) 753-767
133. Kruger-Sehm R., and Seewig J. Uncertainty of Measurement in the Determination of Roughness Parameters Using Contact Stylus Instruments. Technisches Messen 74 10 (2007) 529-537
134. Kubo H., Takamatsuand H., and Honda H. Effects of Size and Number Density of Micro-Reentrant Cavities on Boiling Heat Transfer from a Silicon Chip Immersed in Degassed and Gas-dissolved FC-72. Journal of Enhanced Heat Transfer 6 (1999) 151-160
135. Kuisma R., Pesonen-Leinonen E., Redsven I., Kymalainen H.R., Saarikoski I., Sjoberg A.M., and Hautala M. Utilization of Profilometry, SEM, AFM and Contact Angle Measurements in Describing Surfaces of Plastic Floor Coverings and Explaining their Cleanability. Surface Science 584 1 (2005) 119-125
136. Kun LC, Czikk AM (1969) Surface for Boiling Liquids, Patent US 3,454,081.
137. Kuo C.J., and Peles Y. Local Measurement of Flow Boiling in Structured Microchannels. International Journal of Heat and Mass Transfer 50 (2007) 4513-4526
138. Kurihari H.M., and Myers J.E. Effects of Superheat and Roughness on the Boiling Coefficients. AIChE Journal 6 (1960) 83-91
139. Kuroda M., and Marrow T.J. Preparation of Fatigue Specimens with Controlled Surface Characteristics. Journal of Materials Processing Technology 203 1-3 (2007) 396-403
140. Kuzuya M., Sawa T., Mouri M., Kondo S.I., and Takai O. Plasma Technique for the Fabrication of a Durable Functional Surface on Organic Polymers. Surface & Coating Technologies 169 (2003) 587-591
141. Kwong V.H., Mossman M.A., and Whitehead L.A. Control of Reflectance of Liquid Droplets by Means of Electrowetting. Applied Optics 43 (2004) 808-813
142. Langford R.M., Dale G., Hopkins P.J., Ewen P.J.S., and Petford-Long A.K. Focused Ion Beam Micromachining of Three-Dimensional Structures and Three-Dimensional Reconstruction to Assess their Shape. Journal of Micromechanics and Microengineering 12 (2002) 111-114
143. Leech P.W., and Lee R.A. Optically Variable Micro-Mirror Arrays Fabricated by Graytone Lithography. Microelectronic Engineering 83 (2006) 351-356
144. Leech P.W., and Zeidlerb H. Microrelief Structures for Anti-Counterfeiting Applications. Microelectronic Engineering 65 (2003) 439-446
145. Levi L. Applied Optics (1968), John Wiley & Sons, New York
146. Li L., and Chai D.M. The Research and Application of Honing Technology. Key Engineering Materials 202-203 (2001) 385-388
147. Li Y.R., Pereira G., Kasrai M., and Norton P.R. Studies on ZDDP Anti-Wear Films Formed Under Different Conditions by XANES Spectroscopy, Atomic Force Microscopy and 31P NMR. Tribology Letters 28 3 (2007) 319-328
148. Liang H.S., and Yang W.J. Nucleate Pool Boiling Heat Transfer in a Highly Wetting Liquid on Micro-Graphite Fiber Composite Surfaces. International Journal of Heat and Mass Transfer 41 (1998) 1993-2000
149. Linke H., Alemán B.J., Melling L.D., Taormina M.J., Francis M.J., Dow-Hygelund C.C., Narayanan V., Taylor R.P., and Stout A. Self-Propelled Leidenfrost Droplets. Physical Review Letters 96 (2006) 154-502
150. Lipowsky R., Lenz P., and Swain P.S. Wetting and Dewetting of Structured and Imprinted Surfaces. Colloids and Surfaces A 161 (2000) 3-22
151. Lippmann G. Relation entre les phénomènes électriques et capillaires. Annales de Chimie Physics 5 (1875) 494-549
152. Lonardo P.M. Measurement of Smooth Surface Roughness by Means of Photometric Methods. Annals of the CIRP 23 1 (1974) 189-190
153. Lonardo P.M., and Bruzzone A.A.G. Influence of Surface Roughness Parameters on the Mechanical Strength in Metal Gluing. Annals of the CIRP 38 1 (1989) 571-574
154. Lonardo P.M., De Chiffre L., and Bruzzone A.A.G. Characterisation of Functional Surfaces. Proceedings of 2nd International Conference on Tribology in Manufacturing Processes. Nyborg, Denmark (2004) 39-62
155. Lonardo P.M., Lucca D.A., and De Chiffre L. Emerging Trends in Surface Metrology. Annals of the CIRP 51 2 (2002) 701-723
156. Luan B.Q., Hyun S., Molinari J.F., Bernstein N., and Robbins M.O. Multiscale Modeling of Two-Dimensional Contacts. Physical Review Letters E 74 4 Pt 2 (2006) 046710
157. Luan B.Q., and Robbins M.O. Contact of Single Asperities with Varying Adhesion: Comparing Continuum Mechanics to Atomistic Simulations. Physical Review E 74 2 Pt 2 (2006) 026111
158. Mailis S., Zergioti I., Koundourakis G., Ikiades A., Patentalaki A., Papakonstantinou P., Vainos N., and Fotakis C. Etching and Printing of Diffractive Optical Microstructures by a Femtosecond Excimer Laser. Applied Optics 38 11 (1999) 2303-2308
159. Mate C.M., Mcclelland G.M., Erlandsson R., and Chiang S. Atomic-Scale Friction of a Tungsten Tip on a Graphite Surface. Physical Review Letters 59 (1987) 1942-1945
160. Meijer J. Laser Beam Machining (LBM), State of the Art and New Opportunities. Journal of Materials Processing Technology 149 (2004) 2-17
161. Melcher RL, Romankiw LT, Von Gutfeld RJ (1983) Method for Maskless Chemical Machining, Patent US 4,379,022.
162. Messina A.D., and Park E.L. Effects of Precise Arrays of Pits on Nucleate Boiling. International Journal of Heat Transfer 24 (1981) 141-145
163. Michel B., Bernard A., Bietsche A., Delamarche E., Geissler M., Juncker D., Kind H., Renault J.P., Rothuizen H., Schmid H., Schmidt-Winkel P., Stutz R., and Wolf H. Printing Meets Lithography: Soft Approaches to High-Resolution Patterning. IBM Journal of Research & Development 45 3 (2001) 697-719
164. Miller W.J., Gebhart B., and Wright N.T. Effects of Boiling History on a Micro-Configured Surface in a Dielectric Liquid. International Communications in Heat and Mass Transfer 17 (1990) 389-398
165. Milton RM (1968) Heat Exchange System, Patent US 3,384,154.
166. Mordyuk B.N., and Prokopenko G.I. Ultrasonic Impact Peening for the Surface Properties' Management. Journal of Sound and Vibration 308 (2007) 855-866
167. Mott M., and Evans J.R.G. Zirconia/Alumina Functionally Graded Material Made by Ceramic Ink Jet Printing. Materials Science and Engineering A 271 (1999) 344-352
168. Mott M., Song J.H., and Evans J.R.G. Microengineering of Ceramics by Direct Inkjet Printing. Journal of the American Ceramic Society 82 7 (1999) 1653-1658
169. Nakayama W., Daikoku T., Kuwahara H., and Nakajima T. Dynamic Model of Enhanced Boiling Heat Transfer on Porous Surfaces. Part II. Analytical Modeling. Journal of Heat Transfer 102 (1980) 451-456
170. Nanogen_Nanochip, http://www.nanogen.com, 15 September 2008.
171. Nason J.R., Wierum F., and Yanosy J. Challenges in the Development of the Orbiter Active Thermal Control Subsystem. NASA Johnson Space Center Space Shuttle Technical Conference. Houston TX, January (1985) 450-464
172. Nevoret DC, Swei GS (2003) Coated Abrasives with Indicia, Patent US 6,599,177.
173. Nguyen N.T., and Wu Z. Micromixers-A Review. Journal of Micromechanics and Microengineering 15 (2005) R1-R6
174. Nguyen T.A., and Butler D.L. Simulation of Precision Grinding Process. Part 1. Generation of the Grinding Wheel Surface. International Journal of Machine Tools & Manufacture 45 11 (2005) 1321-1328
175. Nimkar N.D., Bhavnani S.H., and Jaeger R.C. Eflect of Nucleation Site Spacing on the Pool Boiling Characteristics of a Structured Surface. International Journal of Heat and Mass Transfer 49 17-18 (2006) 2829-2839
176. Ohmori H., Katahira K., Komotori J., and Mizutani M. Functionalization of Stainless Steel Surface Through Mirror-Quality Finish Grinding. Annals of the CIRP 57 1 (2008) 545-549
177. Okamoto T., Mori M., Karasawa T., Hayakawa S., Seo I., and Sato H. Ultraviolet-cured Polymer Microlens Arrays. Applied Optics 38 14 (1999) 2991-2996
178. Olver A.V., Guangteng G., and Spikes H.A. In: Dowson D.E.A. (Ed). Film Thickness and Pressure in Micro-EHD Contacts (2000), Elsevier 503-510
179. Palyvoda O., Chen C.C., and Auner G.W. Culturing Neuron Cells on Electrode with Self-Assembly Monolayer. Biosensors & Bioelectronics 22 9-10 (2007) 2346-2350
180. Pancrazio J.J., Whelan J.P., Borkholder D.A., Ma W., and Stenger D.A. Development and Application of Cell-based Biosensors. Annals of Biomedical Engineering 27 6 (1999) 697-711
181. Pawelski O., Rasp W., Zwick W., Nettelbeck H.J., and Steinhoff K. The Influence of Different Work-Roll Texturing Systems on the Development of Surface Structure in the Temper Rolling Process of Steel Sheet used in the Automotive Industry. Journal of Materials Processing Technology 45 (1994) 215-222
182. Pei Q.X., Lu C., and Lee H.P. Large Scale Molecular Dynamics Study of Nanometric Machining of Copper. Computational Materials Science 41 2 (2007) 177-185
183. Pettersson U (2005) Surfaces Designed for High and Low Friction, PhD Thesis, Uppsala University, p. 42.
184. Pettersson U., and Jacobson S. Friction and Wear Properties of Micro Textured DLC Coated Surfaces in Boundary Lubricated Sliding. Tribology letters 17 3 (2004) 553-559
185. Phadke N.K., Bhavnani S.H., Goyal A., Jaeger R.C., and Goodling J.S. Reentrant Cavity Surface Enhancements for Immersion Cooling of Silicon Multichip Packages. IEEE Transactions on Components Hybrids and Manufacturing Technology 15 5 (1992) 815-822
186. Ponz E., Ladaga J.L., and Bonetto R.D. Measuring Surface Topography with Scanning Electron Microscopy. I. EZElmage: A Program to Obtain 3D Surface Data. Microscopy and Microanalysis 12 2 (2006) 170-177
187. Pugliese G., Tavares S.M.O., Ciulli E., and Ferriera L.A. Rough Contacts Between Actual Engineering Surfaces. Part II. Contact Mechanics. Wear 264 11-12 (2007) 1116-1128
188. Qi Y.S., Klausner J.F., and Mei R.W. Role of Surface Structure in Heterogeneous Nucleation. International Journal of Heat and Mass Transfer 47 14-16 (2004) 3097-3107
189. Quilliet C., and Berge B. Electrowetting: A Recent Outbreak. Current Opinion in Colloids & Interface Science 6 1 (2001) 34-39
190. Ramsden J.J., Allen D.M., Stephenson D.J., Alcock J.R., Peggs G.N., Fuller G., and Goch G. The Design and Manufacture of Biomedical Surfaces. Annals of the CIRP 56 2 (2007) 687-711
191. Reimer K., Engelke R., Hofmann U., Merz P., Kohlmann V., Platen K.T., and Wagner B. Progress in Graytone Lithography and Replication Techniques for Different Materials. MF-Conference, Micromachine Technology for Diffractive and Holographic Optics. Santa Clara (1999) 98-105
192. Reverberi A., Del Borghi A., Briano C., Bruzzone A., and Massei M.E.A. Mass Transfer Effects in Copper Surface Chemical Etching Through Masks. Summer Computer Simulation Conference SCSC2006. Calgary, Canada (2006) 257-259
193. Riemer O. A Review on Machining of Micro-Structured Optical Molds. Key Engineering Materials 364-366 (2008) 13-18
194. Ronen A., Etsion I., and Kligerman Y. Friction-Reducing Surface-Texturing in Reciprocating Automotive Components. Tribology Transactions 44 3 (2001) 359-366
195. Roy S. Fabrication of Micro- and Nano-Structured Materials Using Mask-Less Processes. Journal of Physics D-Applied Physics 40 22 (2007) R413-R426
196. Ryk G., Kligerman Y., and Etsion I. Experimental Investigation of Laser Texturing for Reciprocating Automotive Engines. Tribology Transactions 45 4 (2002) 444-449
197. Schey J.A. Systems View of Optimizing Metal on Metal Bearings. Clinical Orthopaedics & Related Research 329S (1996) S115-S127
198. Seemann R., Brinkmann M., Kramer E.J., Lange F.F., and Lipowsky R. Wetting Morphologies at Microstructured Surfaces. PNAS 102 (2005) 1848-1852
199. Sehmbey M.S., Pais M.R., and Chow L.C. Effect of Surface Material Properties and Surface Characteristics in Evaporative Spray Cooling. Journal of Thermophysics and Heat Transfer 6 3 (1992) 505-512
200. Sellgren U., Bjorklund S., and Andersson S. A Finite Element-based Model of Normal Contact Between Rough Surfaces. Wear 254 11 (2003) 1180-1188
201. Sheu S., Hector L.G., and Richmond O. Tool Surface Topographies for Controlling Friction and Wear in Metal-Forming Processes. Journal of Tribology-Transactions of the ASME 120 3 (1998) 517-527
202. Shimada S., Ikawa N., Inamura T., Takezawa N., Ohmori H., and Sata T. Brittle-Ductile Transition Phenomena in Microindentation and Micromachining. Annals of the CIRP 44 1 (1995) 523-526
203. Silk E.A., Kim J., and Kiger K. Spray Cooling of Enhanced Surfaces: Impact of Structured Surface Geometry and Spray Axis Inclination. International Journal of Heat and Mass Transfer 49 25-26 (2006) 4910-4920
204. Skornyakov N.T., Gambaryan-Roisman T., Tropea C., and Stephan P. Background Oriented Schlieren Visualization of Marangoni Effect on Microstructured Plates. Proceedings of the 12th International Symposium on Flow Visualization. Göttingen (2006) 1-10
205. Slikkerveer P.J., and Veld F.H. Model for Patterned Erosion. Wear 233-235 (1999) 377-386
206. Snell D., and Coombs A. Novel Coating Technology for Non-Oriented Electrical Steels. Journal of Magnetism and Magnetic Materials 215-216 (2000) 133-135
207. Sondaghuethorst J.A.M., and Fokkink L.G.J. Potential-Dependent Wetting of Electroactive Ferrocene-Terminated Alkanethiolate Monolayers on Gold. Langmuir 10 11 (1994) 4380-4387
208. Song J.H., Edirisinghe M.J., and Evans J.R.G. Formulation and Multilayer Jet Printing of Ceramic Inks. Journal of the American Ceramic Society 82 12 (1999) 3374-3380
209. Spikes H.A. Mixed Lubrication: An Overview. Lubrication Science 9 (1997) 221-253
210. Squires T.M., and Quake S.R. Microfluidics: Fluid Physics at the Nanoliter Scale. Reviews of Modern Physics 77 3 (2005) 977-1026
211. Srinivasarao M., Collings D., Philips A., and Patel S. Three-Dimensionally Ordered Array of Air Bubbles in a Polymer Film. Science 292 5514 (2001) 79-83
212. Stachowiak G.W., and Batchelor A.W. Engineering Tribology (2001), Butterworth-Heinemann, Boston
213. Steinhoff K., Kapoor A., and Guillon N. Controlled Wear as Mechanism for the Design of Geometrically Defined Nanometric Surface Structures on Forming Tools. Advanced Technology of Plasticity 1 (1999) 265-270
214. Stenger D.A., Gross G.W., Keefer E.W., Shaffer K.M., Andreadis J.D., Ma W., and Pancrazio J.J. Detection of Physiologically Active Compounds Using Cell-based Biosensors. Trends in Biotechnology 19 8 (2001) 304-309
215. Stodke C., and Stephan P. Spray Cooling on Micro-Structured Surfaces. International Journal of Heat and Mass Transfer 50 (2007) 4089-4097
216. Stoetzel WL (1999) Durable Abrasive Articles with Thick Abrasive Coatings, Patent US 5,928,394.
217. Stone H.A., Stroock A.D., and Ajdari A. Engineering Flows in Small Devices: Microfluidics Toward a Lab-on-a-Chip. Annual Review of Fluid Mechanics 36 (2004) 381-411
218. Stutzmann N., Tervoort T.A., Bastiaansen K., and Smith P. Patterning of Polymer-Supported Metal Films by Microcutting. Nature 407 6804 (2000) 613-616
219. Su F., Chakrabarty K., and Fair R.B. Microfluidics-based Biochips: Technology Issues, Implementation Platforms, and Design-Automation Challenges. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems 25 2 (2006) 211-223
220. Suratwala T., Wong L., Miller P., Feit M.D., Menapace J., Steele R., Davis P., and Walmer D. Sub-Surface Mechanical Damage Distributions During Grinding of Fused Silica. Journal of Non-Crystalline Solids 352 52-54 (2006) 5601-5617
221. Swei GS, Kinisky TG, Denes, AG (2002) Scented Engineered Abrasives, Patent US 6,395,044.
222. Takeuchi Y., Sawada K., and Kawai T. Three-Dimensional Micromachining by Means of Ultraprecision Milling. Proceedings of 9th International Precision Engineering Seminar and 4th International Conference on Ultraprecision in Manufacturing Engineering. Braunschweig (1997) 596-599
223. Taylor A.M., Rhee S.W., Tu C.H., Cribbs D.H., Cotman C.W., and Jeon N.L. Microfluidic Multicompartment Device for Neuroscience Research. Langmuir 19 5 (2003) 1551-1556
224. Tian H., and Chao A.M. Optimization of Disk Surface Texturing and Lubrication on CSS Performance. IEEE Transactions on Magnetics 32 5 (1996) 3666-3668
225. Tian H., Saka N., and Suh N.P. Boundary Lubrication Studies on Undulated Titanium Surfaces. Tribology Transactions 32 3 (1989) 289-296
226. Torkkeli A. Droplet Microfluidics on a Planar Surface. Espoo 2003 (2003), VTT Publications 504
227. Tseng Y.-T., Tseng F.-G., Chen Y.-F., and Chieng C.-C. Fundamental Studies on Micro-Droplet Movement by Marangoni and Capillary Effects. Sensors and Actuators A 114 (2004) 292-301
228. Vaeth K.M., Jackman R.J., Black A.J., Whitesides G.M., and Jensen K.F. Use of μCP for Generating Selectively Grown Films of Poly(p-Phenylene Vinylene) and Parylenes Prepared by CVD. Langmuir 16 (2000) 8495-8500
229. Vishnitsky A (1987) Electrochemical Rifling of Gun Barrels, Patent US 4,690,737.
230. Volchok A., Halperin G., and Etsion I. The Effect of Surface Regular Microtopography on Fretting Life. Wear 253 (2002) 509-515
231. Wakuda M., Yamauchib Y., Kanzakib S., and Yasuda Y. Effect of Surface Texturing on Friction Reduction Between Ceramic and Steel Materials Under Lubricated Sliding Contact. Wear 254 3-4 (2003) 356-363
232. Wang X., Kato K., and Adachi K. The Lubrication Effect of Micro-Pits on Parallel Sliding Faces of SiC in Water. Tribology Transactions 45 3 (2002) 294-301
233. Wang X., Kato K., Adachi K., and Aizawa K. The Effect of Laser Texturing of SiC Surface on the Critical Load for the Transition of Water Lubrication Mode from Hydrodynamic to Mixed. Tribology International 34 (2001) 703-711
234. Washizu M. Electrostatic Actuation of Liquid Droplets for Microreactor Applications. IEEE Transactions on Industry Applications 34 4 (1998) 732-737
235. Webb R.L. Kern Lecture Award Paper: Odyssey of the Enhanced Boiling Surface. Journal of Heat Transfer 126 6 (2004) 1051-1059
236. Wei P, Swei GS, Yang WP (2001) Production of Layered Engineered Abrasive Surfaces, Patent US 6,293,980.
237. Whitehouse D.J., Bowen D.K., Venkatesh V.C., Lonardo P.M., and Brown C.A. Gloss and Surface Topography. Annals of the CIRP 43 2 (1994) 541-549
238. Williams J.A. Engineering Tribology (1994), Oxford University Press, Oxford
239. Wink T., Vanzuilen S.J., Bult A., and Vanbennekom W.P. Self-Assembled Monolayers for Biosensors. Analyst 122 4 (1997) R43-R50
240. Wu X.F., and Shi G.Q. Fabrication of a Lotus-Like Micro-Nanoscale Binary Structured Surface and Wettability Modulation from Superhydrophilic to Superhydrophobic. Nanotechnology 16 10 (2005) 2056-2060
241. Wuhrer R., and Yeung W.Y. Grain Refinement with Increasing Magnetron Discharge Power in Sputter Deposition of Nanostructured Titanium Aluminium Nitride Coatings. Scripta Materialia 50 6 (2004) 813-818
242. Xia Y., and Whitesides G.M. Soft Lithography. Angewandte Chemie-International Edition 37 5 (1998) 550-575
243. Xu S., Li M., Mitov Z., and Kumacheva E. Surface Textures Induced by Convection in Thin Films of Polymeric and Polymerizable Fluids. Progress in Organic Coatings 48 2-4 (2003) 227-235
244. Yahata N. Effect of Lapping on the Fatigue-Strength of a Hardened 13Cr-0.34C Stainless Steel. Wear 115 3 (1987) 337-348
245. Yahata N., Inukai T., and Hayama F. Effect of Surface Working on the Fatigue-Strength and Wear of a Hardened 13%Cr Stainless Steel. Wear 80 1 (1982) 89-100
246. Yang C., Tartaglino U., and Persson B.N.J. Influence of Surface Roughness on Superhydrophobicity. PRL 97 (2006) 116103
247. Yang J.J., Liao Y.S., and Chen C.F. Fabrication of Long Hexagonal Micro-Lens Array by Applying Gray-Scale Lithography in Micro-Replication Process. Optics Communications 270 2 (2007) 433-440
248. Yoshino M., Matsumura T., Umehara N., Akagami Y., Aravindan S., and Ohno T. Engineering Surface and Development of a New DNA Micro Array Chip. Wear 260 3 (2006) 274-286
249. Yum J.H., Yoo S.J., Kim S.S., Kim D.Y., and Sung Y.E. Anti-Reflection Layer Using Nano Structured Surface Relief Gratings for Solar Cell. ECS 203rd meeting. May, Paris (2003)
250. Zhao Y.W., Maietta D.M., and Chang L. An Asperity Microcontact Model Incorporating the Transition from Elastic Deformation to Fully Plastic Flow. Journal of Tribology-Transactions of the ASME 122 1 (2000) 86-93
251. Zimmer K., Braun A., and Bigl F. Combination of Different Processing Methods for the Fabrication of 3D Polymer Structures by Excimer Laser Machining. Applied Surface Science 154-155 (2000) 601-604
252. Zou M., Cai L., and Wang H. Adhesion and Friction Studies of a Nano-Textured Surface Produced by Spin Coating of Colloidal Silica Nanoparticle Solution. Tribology Letters 21 1 (2006) 25-30