Image correlation for shape, motion and deformation measurements: Basic concepts, theory and applications

Image Correlation for Shape, Motion and Deformation Measurements: Basic Concepts,Theory and Applications

Volumn , Issue , 2009, Pages 1-321

  Schreier, Hubert ^a   Orteu, Jean José ^b   Sutton, Michael A ^c  

^a Correlated Solutions Inc ^*  (United States)

^b ECOLE DES MINES D ALBI CARMAUX   (France)

^c UNIVERSITY OF SOUTH CAROLINA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84892194308     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-0-387-78747-3     Document Type: Book

References (355)

1. J. Abanto-Bueno and J. Lambros. Investigation of crack growth in functionally graded materials using digital image correlation. Engineering Fracture Mechanics, 69(14):1695-1711, September 2002.
2. J. Abanto-Bueno and J. Lambros. Mechanical and fracture behavior of an artificially ultraviolet-irradiated poly(ethylene-carbon monoxide) copolymer. Journal of Applied Polymer Science, 92(1):139-148, April 2004.
3. J. Abanto-Bueno and J. Lambros. An experimental study of mixed mode crack initiation and growth in functionally graded materials. Experimental Mechanics, 46(2):179-196, April 2006.
4. J. Abanto-Bueno and J. Lambros. Parameters controlling fracture resistance in functionally graded materials under mode I loading. International Journal of Solids and Structures, 43(13):3920-3939, June 2006.
5. F. Ackermann. Digital image correlation: Performance and potential application in photogrammetry. The Photogrammetric Record, 11(64):429-439, October 1984.
6. R. J. Adrian. Particle imaging techniques for experimental fluid mechanics. Annual Reviews in Fluid Mechanics, 23:261-304, 1991.
7. R. Albertani, B. Stanford, J. P. Hubner, and P. G. Ifju. Aerodynamic coefficients and deformation measurements on flexible micro air vehicle wings. Experimental Mechanics, 47(5): 625-635, October 2007.
8. M. Ali-Ahmad, K. Subramaniam, and M. Ghosn. Experimental investigation and fracture analysis of debonding between concrete and FRP sheets. Journal of Engineering Mechanics, 132(9):914-923, 2006.
9. R. Ambu, F. Aymerich, and F. Bertolino. Investigation of the effect of damage on the strength of notched composite laminates by digital image correlation. The Journal of Strain Analysis for Engineering Design, 40(5):451-462, July 2005.
10. D. R. Ambur, N. Jaunky, and M. W. Hilburger. Progressive failure studies of stiffened panels subjected to shear loading. Composite Structures, 65(2):129-142, August 2004.
11. B. E. Amstutz, M. A. Sutton, and D. S. Dawicke. Experimental study of mixed mode I/II stable crack growth in thin 2024-T3 aluminum. ASTM STP 1256 on Fatigue and Fracture, 26:256-273, 1995.
12. B. E. Amstutz, M. A. Sutton, D. S. Dawicke, and M. L. Boone. Effects of mixed mode I/II loading and grain orientation on crack initiation and stable tearing in 2024-T3 aluminum. ASTM STP 1296 on Fatigue and Fracture, 27:105-125, 1997.
13. J. Anderson, W. H. Peters, M. A. Sutton, W. F. Ranson, and T. C. Chu. Application of digital correlation methods to rigid body mechanics. Optical Engineering, 22(6):238-243, 1984.
14. M. Andersson and D. Betsis. Point reconstruction from noisy images. Journal of Mathematical Imaging and Vision, 5(1):77-90, 1995. doi: 10.1007/BF01250254.
15. K. Andresen. Strain tensor for large three-dimensional surface deformation of sheet metal from an object grating. Experimental Mechanics, 39(1):30-35, March 1999.
16. N. P. Andrianopoulos. Full-field displacement measurement of a speckle grid by using a mesh-free deformation function. Strain, 42(4):265-271, November 2006.
17. Anon. Gilbert Louis Hobrough. The Photogrammetric Record, 18(104):337-340, 2003.
18. E. Archbold, J. M. Burch, and A. E. Ennos. Recording of in-plane surface displacements by double exposure speckle photography. Optica Acta, 17:883-898, 1970.
19. E. Archbold and A. E. Ennos. Laser photography to measure deformation of weld cracks under load. Non-Destructive Testing, 8:181-184, 1975.
20. X. Armangué and J. Salvi. Overall view regarding fundamental matrix estimation. Image and Vision Computing, 21(2):205-220, 2003.
21. S. Avril, M. Grédiac, and F. Pierron. Sensitivity of the virtual fields method to noisy data. Computational Mechanics, 34(6):439-452, 2004.
22. S. Avril and F. Pierron. General framework for the identification of elastic constitutive parameters from full-field measurements. International Journal of Solids and Structures, 44:4978-5002, 2007.
23. N. Bahlouli, S. Mguil-Touchal, S. Ahzi, and M. Laberge. Stress-strain response of biomaterials by a digital image correlation method: application to tecoflex. Journal of Materials Science & Technology, 20:114-116, 2004.
24. S. Baker and I. Matthews. Equivalence and efficiency of image alignment algorithms. In Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition, 1:1090-1097, 2001.
25. S. Baker and I. Matthews. Lucas-Kanade 20 years on: A unifying framework. International Journal of Computer Vision, 56(3):221-255, March 2004.
26. B. K. Bay, T. S. Smith, D. P. Fyhrie, and M. Saad. Digital volume correlation: Threedimensional strain mapping using X-ray tomography. Experimental Mechanics, 39(3):217-226, September 1999.
27. B. K. Bay. Texture correlation: A method for the measurement of detailed strain distributions within trabecular bone. Journal of Orthopaedic Research, 13(2):258-267, March 1995.
28. T. A. Berfield, J. K. Patel, R. G. Shimmin, P. V. Braun, J. Lambros, and N. R. Sottos. Microand nanoscale deformation measurement of surface and internal planes via digital image correlation. Experimental Mechanics, 47(1):51-62, February 2007.
29. S. Bergonnier, F. Hild, and S. Roux. Digital image correlation used for mechanical tests on crimped glass wool samples. The Journal of Strain Analysis for Engineering Design, 40(2):185-197, February 2005.
30. P. Bésuelle, G. Viggiani, N. Lenoir, J. Desrues, and M. Bornert. X-ray micro CT for studying strain localization in clay rocks under triaxial compression. In J. Desrues, G. Viggiani, and P. Bésuelle, editors, Proceedings of 2nd International Workshop on X-Ray CT for Geomaterials (GeoX 2006), pages 35-52, Grenoble & Aussois, France, October 2006.
31. A. R. Bhandari and J. Indue. Experimental study of strain rates effects on strain localization characteristics of soft rocks. Soils and Foundations, 45(1):125-140, 2005.
32. B. Birgisson, A. Montepara, E. Romeo, R. Roncella, J. A. L. Napier, and G. Tebaldi. Determination and prediction of crack patterns in hot mix asphalt (HMA) mixtures. Engineering Fracture Mechanics, 75(3-4):664-673, February-March 2008.
33. C. Bontus, T. Kohler, and R. Proksa. En:Pi: Filtered back-projection algorithm for helical CT using an n-rm Pi acquisition. Medical Imaging, 24(8):977-986, 2005.
34. F. Boochs. Off-line compilation of photogrammetric stereo models using digital image correlation. Photogrammetria, 41(3):183-199, June 1987.
35. M. Born and E. Wolf. Principles of Optics. Pergamon Press, London, 3rd edition, 1965.
36. P. Brand, R. Mohr, and P. Bobet. Distorsions optiques: Correction dans un modèle projectif. In Actes du 9ème Congrès AFCET (RFIA'94), pages 87-98, Paris, France, January 1994.
37. H. A. Bruck, S. R. McNeill, M. A. Sutton, and W. H. Peters. Digital image correlation using Newton-Raphson method of partial differential correction. Experimental Mechanics, 29(3):261-267, September 1989.
38. H. A. Bruck, C. L. Moore, and T. M. Valentine. Bending actuation in polyurethanes with a symmetrically graded distribution of one-way shape memory alloy wires. Experimental Mechanics, 44(1):62-70, February 2004.
39. J. F. Cárdenas-Garcia, H. G. Yao, and S. Zheng. 3D reconstruction of objects using stereo imaging. Optics and Lasers in Engineering, 22(3):193-213, 1995.
40. Y. J. Chao and M. A. Sutton. Measurement of strains in a paper tensile specimen using computer vision and digital image correlation - Part 2: Tensile specimen test. Tappi Journal, 70(4):153-156, 1988.
41. I. Chasiotis. Mechanics of thin films and microdevices. IEEE Transactions on Device and Materials Reliability, 4(2):176-188, June 2004.
42. I. Chasiotis and W. G. Knauss. A new microtensile tester for the study of MEMS materials with the aid of atomic force microscopy. Experimental Mechanics, 42(1):51-57, March 2002.
43. D. J. Cheng, F. P. Chang, Y. S. Tan, and H. S. Don. Digital speckle-displacement measurement using a complex spectrum method. Applied Optics, 32:1839, 1993.
44. P. Cheng, M. A. Sutton, H. W. Schreier, and S. R. McNeill. Full-field speckle pattern image correlation with B-Spline deformation function. Experimental Mechanics, 42(3):344-352, September 2002.
45. T. Cheng, C. Dai, and R. Gan. Viscoelastic properties of human tympanic membrane. Annals of Biomedical Engineering, 35(2):305-314, February 2007.
46. S. Chof and S. P. Shah. Measurement of deformations on concrete subjected to compression using image correlation. Experimental Mechanics, 37(3):307-313, 1997.
47. S. Chof and S. P. Shah. Fracture mechanism in cement-based materials subjected to compression. Journal of Engineering Mechanics, 124(1):94-102, January 1998.
48. T. C. Chu, W. F. Ranson, M. A. Sutton, and W. H. Peters. Applications of digital-imagecorrelation techniques to experimental mechanics. Experimental Mechanics, 25(3):232-244, 1985.
49. D. Coburn and J. A. Slevin. Development of a digital speckle correlation system for use in the non-destructive testing of advanced engineering ceramics. Key Engineering Materials, 86-87:237-244, 1993.
50. S. A. Collette, M. A. Sutton, P. Miney, A. P. Reynolds, X. Li, P. E. Colavita, W. A. Scrivens, Y. Luo, T. Sudarshan, P. Muzykov, and M. L. Myrick. Development of patterns for nanoscale strain measurements: I. Fabrication of imprinted Au webs for polymeric materials. Nanotechnology, 15(12):1812-1817, December 2004.
51. P. Compston, M. Styles, and S. Kalyanasundaram. Low energy impact damage modes in aluminum foam and polymer foam sandwich structures. Journal of Sandwich Structures and Materials, 8(5):365-379, September 2006.
52. N. Cornille. Accurate 3D Shape and Displacement Measurement Using a Scanning Electron Microscope. Ph.D. thesis, INSA/University of South Carolina, France, Columbia, USA, June 2005.
53. N. Cornille, D. Garcia, M. A. Sutton, S. R. McNeill, and J.-J. Orteu. Automated 3-D reconstruction using a scanning electron microscope. In Proceedings of SEM 2003 Annual Conference on Experimental and Applied Mechanics, Charlotte, N.C., USA, June 2003.
54. N. Cornille, D. Garcia, M. A. Sutton, S. R. McNeill, and J.-J. Orteu. 3D shape and strain measurements using a scanning electron microscope. In Proceedings of International Conference on Experimental Mechanics (ICEM12), Bari, Italy, September 2004.
55. J. Cugnoni, J. Botsis, V. Sivasubramaniam, and J. Janczak-Rusch. Experimental and numerical studies on size and constraining effects in lead-free solder joints. Fatigue & Fracture of Engineering Materials & Structures, 30(5):387-399, May 2007.
56. Y. Z. Dai, C. J. Tay, and F. P. Chiang. Determination of the plastic zone by laser-speckle correlation. Experimental Mechanics, 31(4):348-352, December 1991.
57. J. C. Dainty, editor. Laser Speckle and Related Phenomena. Springer, Berlin, 1975.
58. S. Daly, A. Miller, G. Ravichandran, and K. Bhattacharya. An experimental investigation of crack initiation in thin sheets of nitinol. Acta Materialia, 55(18):6322-6330, October 2007.
59. S. Das and N. Ahuja. Performance analysis of stereo, vergence, and focus as depth cues for active vision. IEEE Transactions on Pattern Analysis and Machine Intelligence, 17(12):1213-1219, 1995.
60. D. L. Davidson and J. Lankford. Fatigue crack tip strains in 7075-T6 aluminum alloy using stereo-imaging and their use in fatigue crack growth Models. In J. Lankford, D. L. Davidson, and R. P. Morris, W. L. Wei, editors, Fatigue Mechanisms: Advances in Quantitative Measurement of Physical Damage, pages 371-399. ASTM STP 811, Philadelphia, PA, 1983.
61. D. L. Davidson, D. R. Williams, and J. E. Buckingham. Crack tip stresses as determined from strains determined by stereoimaging. Experimental Mechanics, 23(2):242-248, 1983.
62. D. S. Dawicke and M. A. Sutton. CTOA and crack-tunneling measurements in thin sheet 2024-T3 aluminum alloy. Experimental Mechanics, 34(4):357-368, December 1994.
63. M. Devy, V. Garric, and J.-J. Orteu. Camera calibration from multiple views of a 2D object using a global non linear minimization method. In International Conference on Intelligent Robots and Systems (IROS'97), Grenoble, France, September 1997.
64. P. Doumalin, M. Bornert, and D. Caldemaison. Microextensometry by image correlation applied to micromechanical studies using the scanning electron microscopy. In The Japan Society of Mechanical Engineering, editor, Proceedings of International Conference on Advanced Technology in Experimental Mechanics (ATEM 99), pages 81-86, Ube City, Japan, 1999.
65. F. J. Doyle. The historical development of analytical photogrammetry. Photogrammetric Engineering, pages 259-265, 1964.
66. I. Dutta, D. Pan, S. Ma, B. S. Majumdar, and S. Harris. Role of shape-memory alloy reinforcements on strain evolution in lead-free solder joints. Journal of Electronic Materials, 35(10):1902-1913, October 2006.
67. G. Farin. Curves and Surfaces for Computer Aided Geometric Design - A Practical Guide. Academic Press, San Diego, CA, 1993.
68. O. Faugeras and F. Devernay. Computing Differential Properties of 3D shapes from Stereoscopic Images without 3D Models. Technical Report 2304, INRIA (France), 1994.
69. O. Faugeras, Q. T. Luong, and T. Papadopoulos. The Geometry of Multiple Images. MIT Press, Cambridge, 2001. ISBN 0-262-06158-9.
70. O. Faugeras. Three-Dimensional Computer Vision: A Geometric Viewpoint.MIT Press, Cambridge, 1993. ISBN 0-262-06220-8.
71. C. Feichter, Z. Major, and R. W. Lang. Deformation analysis of notched rubber specimens. Strain, 42(4):299-304, November 2006.
72. R. J. Finno and A. L. Rechenmacher. Effects of consolidation history on critical state of sand. Journal of Geotechnical and Geoenvironmental Engineering, 129(4):350-360, April 2003.
73. J. N. Florando, M. M. LeBlanc, and D. H. Lassila. Multiple slip in copper single crystals deformed in compression under uniaxial stress. Scripta Materialia, 57(6):537-540, September 2007.
74. J. N. Florando, M. Rhee, A. Arsenlis, M. M. LeBlanc, and D. H. Lassila. Calculation of the slip system activity in deformed zinc single crystals using digital 3-D image correlation data. Philosophical Magazine Letters, 86(12):795-805, December 2006.
75. G. Florou and R. Mohr. What accuracy for 3D measurements with cameras? Proceedings of International Conference on Pattern Recognition, Vienna, Austria, pages 354-358, 1996.
76. C. Forno. White-light speckle photography for measuring deformation, strain, and shape. Optics & Laser Technology, 7(5):217-221, October 1975.
77. P. Forquin, L. Rota, Y. Charles, and F. Hild. A method to determine the macroscopic toughness scatter of brittle materials. International Journal of Fracture, 125(1):171-187, January 2004.
78. M. Fouinneteau and A. K. Pickett. Failure characterisation of heavy tow braided composites using digital image correlation (DIC). Applied Mechanics and Materials, 5-6:399-406, 2006.
79. M. R. C. Fouinneteau and A. K. Pickett. Shear mechanism modelling of heavy tow braided composites using a meso-mechanical damage model. Composites Part A: Applied Science and Manufacturing, 38(11):2294-2306, November 2007.
80. C. Franck, S. Hong, S. A. Maskarinec, D. A. Tirrell, and G. Ravichandran. Threedimensional full-field measurements of large deformations in soft materials using confocal microscopy and digital volume correlation. Experimental Mechanics, 47(3):427-438, June 2007.
81. A. Fusiello, M. Farenzena, A. Busti, and A. Benedetti. Computing rigorous bounds to the accuracy of calibrated stereo reconstruction. IEEE Proceedings of Vision, Image and Signal Processing, 152(6):695-701, December 2005. doi:10.1049/ip-vis:20041054.
82. D. Gabor. Microscopy by reconstructed wavefronts. In Proceedings of the Royal Society, volume A197, pages 454-487, 1949.
83. D. Garcia. Mesure de formes et de champs de déplacements tridimentionnels par stéréocorrélation d'images. Ph.D. thesis, Institut National Polytechnique de Toulouse, France, December 2001.
84. D. Garcia, J.-J. Orteu, and M. Devy. Accurate calibration of a stereovision sensor: comparison of different approaches. In Proceedings of 5th Workshop on Vision, Modeling, and Visualization (VMV'2000), pages 25-32, Saarbrücken, Germany, November 2000.
85. M. G. D. Geers, R. de Borst, and T. Peijs. Mixed numerical-experimental identification of non-local characteristics of random-fibre-reinforced composites. Composites Science and Technology, 59(10):1569-1578, August 1999.
86. A. Germaneau, P. Doumalin, and J.-C. Dupré. Improvement of accuracy of strain measurement by digital volume correlation for transparent materials. In Proceedings of Photomechanics 2006, Clermont-Ferrand, France, July 2006.
87. A. Germaneau, P. Doumalin, and J.-C. Dupré. 3D strain field measurement by correlation of volume images using scattered light: Recording of images and choice of marks. Strain, 43(3):207-218, August 2007.
88. A. Germaneau, P. Doumalin, and J.-C. Dupré. Full 3D measurement of strain field by scattered light for analysis of structures. Experimental Mechanics, 47(4):523-532, August 2007.
89. A. Germaneau. Développement de techniques de mesure dans le volume : Photoélasticimétrie 3D par découpage optique et corrélation volumique par tomographie optique et rayons X. Application à l'étude des effets mécaniques 3D dans les structures et les biomatériaux. Ph.D. thesis, Université de Poitiers, November 2007.
90. G. Geymonat, F. Hild, and S. Pagano. Identification of elastic parameters by displacement field measurement. Comptes Rendus Mécanique, 330(6):403-408, 2002.
91. G. Geymonat and S. Pagano. Identification of mechanical properties by displacement field measurement: A variational approach. Meccanica, 38(5):535-545, October 2003.
92. M. Giton, A.-S. Caro-Bretelle, and P. Ienny. Hyperelastic behaviour identification by a forward problem resolution: Application to a tear test of a silicone-rubber. Strain, 42(4):291-297, November 2006.
93. J. Gonzalez and W. G. Knauss. Strain inhomogeneity and discontinuous crack growth in a particulate composite. Journal of the Mechanics and Physics of Solids, 46(10):1981-1995, October 1998.
94. M. Grédiac. Principe des travaux virtuels et identification/ principle of virtual work and identification. Comptes Rendus de l'Académie des Sciences, pages 1-5, 1989. In French with abridged English version.
95. M. Grédiac, F. Pierron, S. Avril, and E. Toussaint. The virtual fields method for extracting constitutive parameters from full-field measurements: a review. Strain, 42(4):233-253, 2006.
96. H. Gruner. Reinhard Hugershoff. Photogrammetric Engineering, 37(9):939-947, 1971.
97. R. Guastavino and P. Göoransson. A 3D displacement measurement methodology for anisotropic porous cellular foam materials. Polymer Testing, 26(6):711-719, September 2007.
98. M. Gutierrez and I. Vardoulakis. Energy dissipation and post-bifurcation behaviour of granular soils. International Journal for Numerical and Analytical Methods in Geomechanics, 31(3):435-455, March 2007.
99. K. Ha and R. A. Schapery. A three-dimensional viscoelastic constitutive model for particulate composites with growing damage and its experimental validation. International Journal of Solids and Structures, 35(26):3497-3517, 1998.
100. K. Haines and B. P. Hildebrand. Contour generation by wavefront construction. Physics Letters, 21:422-423, 1965.
101. G. Han, M. A. Sutton, and Y. J. Chao. A study of stationary crack tip deformation fields in thin sheets by computer vision. Experimental Mechanics, 34(2):751-761, June 1994.
102. G. Han, M. A. Sutton, and Y. J. Chao. A study of stable crack growth in thin SEC specimens of 304 stainless steel. Engineering Fracture Mechanics, 52(3):525-555, 1995.
103. J. Han and T. Siegmund. A combined experimental-numerical investigation of crack growth in a carbon/carbon composite. Fatigue & Fracture of Engineering Materials & Structures, 29(8):632-645, August 2006.
104. R. M. Haralick. Propagating covariance in computer vision.Workshop on Performance Characteristics of Vision Algorithms, Cambridge, UK, edited by H. Christensen, W. Forstner and C. Madsen, pages 1-12, 1996.
105. R. I. Hartley and A. Zisserman. Multiple View Geometry in Computer Vision. Cambridge University Press, Cambridge, 2nd edition, 2004, ISBN 0521540518.
106. R. S. He, C. T. Horn, H. J. Wang, and S. F. Hwang. Deformation measurement by a digital image correlation method combined with a hybrid genetic algorithm. Key Engineering Materials, 326-328(1):139-142, 2006.
107. E. Hecht and A. Zajac. Optics. Addison-Wesley, Reading, MA, 1st edition, 1974.
108. U. V. Helava. Digital correlation in photogrammetric instruments. Photogrammetria, 34(1): 18-41, January 1978.
109. J. D. Helm, S. R. McNeill, and M. A. Sutton. Improved three-dimensional image correlation for surface displacement measurement. Optical Engineering, 35(7):1911-1920, 1996.
110. J. D. Helm, M. A. Sutton, D. S. Dawicke, and G. Hanna. Three-dimensional computer vision applications for aircraft fuselage materials and structures. In Proceedings of 1st Joint DoD/FAA/NASA Conference on Aging Aircraft, 1:1327-1341, Ogden, UT, USA, 1997.
111. J. D. Helm, M. A. Sutton, and S. R. McNeill. Deformations in wide, center-notched, thin panels, part I: Three-dimensional shape and deformation measurements by computer vision. Optical Engineering, 42(5):1293-1305, 2003.
112. J. D. Helm,M. A. Sutton, and S. R.McNeill. Deformations in wide, center-notched, thin panels, part II: finite element analysis and comparison to experimental measurements. Optical Engineering, 42(5):1306-1320, 2003.
113. E. Héripré, M. Dexet, J. Crépin, L. Gélébart, A. Roos, M. Bornert, and D. Caldemaison. Coupling between experimental measurements and polycrystal finite element calculations for micromechanical study of metallic materials. International Journal of Plasticity, 23(9): 1512-1539, September 2007.
114. F. Hild. Correli: A Software for Displacement Field Measurements by Digital Image Correlation. Technical Report 254, LMT-Cachan, 2002.
115. F. Hild, B. Raka, M. Baudequin, S. Roux, and F. Cantelaube. Multiscale displacement field measurements of compressed mineral-wool samples by digital image correlation. Applied Optics, 41(32):6815-6828, November 2002.
116. F. Hild and S. Roux. Digital image correlation: From displacement measurement to identification of elastic properties - a review. Strain, 42(2):69-80, May 2006.
117. B. P. Hildebrand and K. Haines. Multiple wavelength and multiple source holography applied to contour generation. Journal of the Optical Society of America, 57:155-162, 1967.
118. K. D. Hinsch. Three-dimensional particle image velocimetry. Measurement Science and Technology, 6:742-753, 1995.
119. K. D. Hinsch and N. J. Lawson. Three-dimensional particle image velocimetry: Experimental error analysis of a digital angular stereoscopic system. Measurement Science and Technology, 8:1455-1464, 1995.
120. T. Hoc, L. Henry, M. Verdier, D. Aubry, L. Sedel, and A. Meunier. Effect of microstructure on the mechanical properties of Haversian cortical bone. Bone, 38(4):466-474, April 2006.
121. P. Hof. Stress determination on glass by digital image correlation (DIC). IABSE Reports, 92:38-39, 2006.
122. D. Holstein, L. Salbut, M. Kujawinska, and W. Jüptner. Hybrid experimental-numerical concept of residual stress analysis in laser weldments. Experimental Mechanics, 41(4), December 2001.
123. Z. Hou and Y. Qin. The study of fractal correlation method in the displacement measurement and its application. Optics and Lasers in Engineering, 39(4):465-472, April 2003.
124. T. S. Huang and S. D. Blostein. Error analysis in stereo determination of 3-D point positions. IEEE Transactions on Pattern Analysis and Machine Intelligence, 9(6):752-765, 1987.
125. Y. Y. Hung and C. E. Taylor. Speckle shearing interferometric camera-a tool for measurement of derivatives of surface displacement. In SPIE Proceedings, volume 41, pages 169-175, 1973.
126. V. Huon, B. Wattrisse, M. S. El Youssoufi, and A. Chrysochoos. Elastic behavior of anisotropic terra cotta ceramics determined by kinematic full-field measurements. Journal of the European Ceramic Society, 27(5):2303-2310, 2007.
127. C. Husson, N. Bahlouli, S. Mguil-Touchal, and S. Ahzi. Mechanical characterization of thin metal sheets by a digital image correlation method. Journal de Physique IV, 12(11):393-400, 2002.
128. S.-F. Hwang, J.-T. Horn, and H.-J. Wang. Strain measurement of nickel thin film by a digital image correlation method. Strain, 44(3):215-222, June 2008.
129. M. Ikeda, M. Masuda, K. Murata, and S. Ukyo. Analysis of in-plane shear behavior of wood based panels by digital image correlation. Journal of the Society of Materials Science, Japan, 55(6):569-575, 2006.
130. Correlated Solutions Incorporated. Calibrated sensor and method for calibrating same, 2006. Patent Filed 2/6/2003: Patent Issued 11/7/2006: US Patent No. 7,133,570.
131. E. Jiménez-Piqué, L. J.M. G. Dortmans, and G. DeWith. Fracture and crack profile fictitious crack modeling of porous poly(methyl methacrylate). Journal of Polymer Science Part B: Polymer Physics, 41(10):1112-1122, May 2003.
132. H. Jin and H. A. Bruck. A new method for characterizing nonlinearity in scanning probe microscopes using digital image correlation. Nanotechnology, 16(9):1849-1855, September 2005.
133. H. Jin, W.-Y. Lu, S. Scheffel, T. D. Hinnerichs, and M. K. Neilsen. Full-field characterization of mechanical behavior of polyurethane foams. International Journal of Solids and Structures, 44(21):6930-6944, October 2007.
134. H. Jin and H. A. Bruck. Pointwise digital image correlation using genetic algorithms. Experimental Techniques, 29(1):36-39, January 2005.
135. H. Jin and H. A. Bruck. Theoretical development for pointwise digital image correlation. Optical Engineering, 44(6):067003, June 2005.
136. A. Jones, J. Shaw, and A.Wineman. An experimental facility to measure the chemorheological response of inflated elastomer membranes at high temperature. Experimental Mechanics, 46(5):579-587, 2006.
137. Z. L. Kahn-Jetter and T. C. Chu. Three-dimensional displacement measurements using digital image correlation and photogrammic analysis. Experimental Mechanics, 30(1):10-16, March 1990.
138. J. Kang, M. Jain, D. S. Wilkinson, and J. D. Embury. Microscopic strain mapping using scanning electron microscopy topography image correlation at large strain. The Journal of Strain Analysis for Engineering Design, 40(6):559-570, 2005.
139. N. R. Kay, S. Ghosh, I. Guven, and E. Madenci. A combined experimental and analytical approach for interface fracture parameters of dissimilar materials in electronic packages. Materials Science and Engineering: A, 421(1-2):57-67, April 2006.
140. M. V. Klein. Optics. Wiley, New York, 1970.
141. W. G. Knauss and W. Zhu. Nonlinearly viscoelastic behavior of polycarbonate. I. Response under pure shear. Mechanics of Time-Dependent Materials, 6(3):231-269, 2002.
142. T. Kodaka, Y. Higo, S. Kimoto, and F. Oka. Effects of sample shape on the strain localization of water-saturated clay. International Journal for Numerical and Analytical Methods in Geomechanics, 31(3):483-521, March 2007.
143. O. Kolednik and H. P. Stüwe. The stereophotogrammetric determination of the critical crack tip opening displacement. Engineering Fracture Mechanics, 21(1):145-155, 1985.
144. G. Konecny. The international society for photogrammetry and remote sensing - 75 years old, or 75 years young. Photogrammetric Engineering and Remote Sensing, 51(7):919-933, 1985.
145. A. J. Lacey, N. A. Thacker, S. Crossley, and R. B Yates. A multi-stage approach to the dense estimation of disparity from stereo SEM images. Image and Vision Computing, 16(1):373-383, 1998.
146. F. Lagattu, F. Bridier, P. Villechaise, and J. Brillaud. In-plane strain measurements on a microscopic scale by coupling digital image correlation and an in situ SEM technique. Materials Characterization, 56(1):10-18, January 2006.
147. L. Larsson, M. Sjödahl, and F. Thuvander. Microscopic 3-D displacement fieldmeasurements using digital speckle photography. Optics and Lasers in Engineering, 41(5):767-777, May 2004.
148. J. M. Lavest, M. Viala, and M. Dhome. Do we really need an accurate calibration pattern to achieve a reliable camera calibration? In Proceedings of European Conference on Computer Vision, pages 158-174, Frieburg, Germany, 1998.
149. D. Lecompte, J. Vantomme, and H. Sol. Crack detection in a concrete beam using two different camera techniques. Structural Health Monitoring, 5(1):59-68, 2006.
150. D. Lecompte, A. Smits, H. Sol, J. Vantomme, and D. Van Hemelrijck. Mixed numericalexperimental technique for orthotropic parameter identification using biaxial tensile tests on cruciform specimens. International Journal of Solids and Structures, 44(5):1643-1656, March 2007.
151. J.-H. Lee and K.-J. Kang. In situ measurement of lateral side-necking of a fracture specimen using a stereo vision and digital image correlation. Journal of the Korean Society of Precision Engineering, 21(10):154-161, 2004.
152. S. Lee, F. Barthelat, N. Moldovan, H. D. Espinosa, and H. N. G. Wadley. Deformation rate effects on failure modes of open-cell Al foams and textile cellular materials. International Journal of Solids and Structures, 43(1):53-73, January 2006.
153. J. A. Leendertz and J. N. Butters. An image shearing speckle pattern interferometer for measuring bending moments. Journal of Physics E: Scientific Instruments, 7:1107-1110, 1973.
154. E. N. Leith and J. Upatnieks. Reconstructed wavefronts and communication theory. Journal of the Optical Society of America, 25:1123-1130, 1962.
155. N. Lenoir, M. Bornert, J. Desrues, P. Bésuelle, and G. Viggiani. 3D digital correlation applied to X-ray microtomography images of in-situ triaxial tests on argiliceous rock. In Proceedings of Photomechanics 2006, Clermont-Ferrand, France, 2006.
156. N. Lenoir, M. Bornert, J. Desrues, P. Bésuelle, and G. Viggiani. Volumetric digital image correlation applied to X-ray microtomography images from triaxial compression tests on argillaceaous rocks. Strain, 43(3):193-205, August 2007.
157. J. Li and R. Shi. Stretch-induced nerve conduction deficits in guinea pig ex vivo nerve. Journal of Biomechanics, 40(3):569-578, 2007.
158. N. Li, M. A. Sutton, X. Li, and H.W. Schreier. Full-field thermal deformation measurements in a scanning electron microscope by 2D digital image correlation. Experimental Mechanics, 48(5):635-646, October 2008.
159. X. Li, W. Xu, M. A. Sutton, and M. Mello. In situ nanoscale in-plane deformation studies of ultrathin polymeric films during tensile deformation using atomic force microscopy and digital image correlation techniques. IEEE Transactions on Nanotechnology, 6(1):4-12, January 2007.
160. X. Li, W. Xu, M. A. Sutton, and M. Mello. Nanoscale deformation and cracking studies of advanced metal evaporated magnetic tapes using atomic force microscopy and digital image correlation techniques. Materials Science and Technology, 22(7):835-844, July 2006.
161. J. Liu, M. A. Sutton, and J. S. Lyons. Experimental characterization of crack tip deformations in alloy 718 at high temperatures. ASME Journal of Engineering Materials and Technology, 20(1):71-78, 1998.
162. J. Liu and M. Iskander. Adaptive cross correlation for imaging displacements in soils. Journal of Computing in Civil Engineering, 18(1):46-57, 2004.
163. W. D. Lockwood and A. P. Reynolds. Simulation of the global response of a friction stir weld using local constitutive behavior. Materials Science and Engineering: A, 339(1):35-42, January 2003.
164. W. D. Lockwood, B. Tomaz, and A. P. Reynolds. Mechanical response of friction stir welded AA2024: experiment and modeling. Materials Science and Engineering: A, 323(1):348-353, January 2002.
165. W. D. Lockwood and A. P. Reynolds. Use and verification of digital image correlation for automated 3-D surface characterization in the scanning electron microscope. Materials Characterization, 42(2):123-134, February 1999.
166. L. Louis, T.-F. Wong, and P. Baud. Imaging strain localization by X-ray radiography and digital image correlation: Deformation bands in Rothbach sandstone. Journal of Structural Geology, 29(1):129-140, January 2007.
167. H. Lu and D. Cary. Deformation measurements by digital image correlation: Implementation of a second-order displacement gradient. Experimental Mechanics, 40(4):393-400, December 2000.
168. H. Lu, X. Zhang, and W. G. Knauss. Uniaxial, shear, and poisson relaxation and their conversion to bulk relaxation: Studies on poly(methyl methacrylate). Polymer Composites, 18(2):211-222, April 1997.
169. H. Lu, X. Zhang, and W. G. Knauss. Uniaxial, shear, and poisson relaxation and their conversion to bulk relaxation: Studies on poly(methyl methacrylate). Polymer Engineering & Science, 37(6):1053-1064, June 1997.
170. B. D. Lucas and T. Kanade. An iterative image registration technique with an application to stereo vision. In Proceedings of the 1981 DARPA Image Understanding Workshop, pages 121-130, April 1981.
171. O. Ludwig, M. Dimichiel, L. Salvo, M. Suéry, and P. Falus. In-situ
172. P. F. Luo, Y. J. Chao, and M. A. Sutton. Application of stereo vision to three-dimensional deformation analyses in fracture experiments. Optical Engineering, 33(3):981-990, 1994.
173. P. F. Luo, Y. J. Chao, M. A. Sutton, and W. H. Peters. Accurate measurement of threedimensional deformations in deformable and rigid bodies using computer vision. Experimental Mechanics, 33(2):123-132, June 1993.
174. P. F. Luo and F. C. Huang. Application of stereo vision to the study of mixed-mode crack-tip deformations. Optics and Lasers in Engineering, 33(5):349-368, May 2000.
175. A. R. Luxmoore, F. A. A. Amin, and W. T. Evans. In-plane strain measurement by speckle photography: A practical assessment of the use of Young's fringes. Journal of Strain Analysis, 9:26-34, 1974.
176. J. S. Lyons, J. Liu, and M. A. Sutton. High-temperature deformation measurements using digital-image correlation. Experimental Mechanics, 36(1):64-70, March 1996.
177. S. P. Ma, L. G. Wang, and G. C. Jin. Damage evolution inspection of rock using digitalspeckle correlationmethod (DSCM). Key EngineeringMaterials, 326-328:1117-1120, 2006.
178. Y. Ma, S. Soatto, J. Kosecka, and S. S. Sastry. An Invitation to 3-D Vision: From Images to Geometric Models. Springer, Berlin, 2003.
179. K. Machida, M. Sato, and S. Ogihara. Application of stress analysis by digital image correlation and intelligent hybrid method to unidirectional CFRP laminate. Key Engineering Materials, pages 1121-1124, 2007.
180. S. Mallik and M. L. Roblin. Speckle pattern interferometry applied to the study of phase objects. Optics Communications, 6:45-49, 1972.
181. L. E. Malvern. Introduction to the Mechanics of a Continuous Medium. Prentice-Hall, Englewood Cliffs, NJ, 1969.
182. Y. Marco, L. Chevalier, andM. Chaouche.WAXD study of induced crystallization and orientation in poly(ethylene terephthalate) during biaxial elongation. Polymer, 43(24):6569-6574, November 2002.
183. R. Marik, J. Kittler, and M. Petrou. Error sensitivity assessment of vision algorithm based on direct error-propagation. Workshop on Performance Characteristics of Vision Algorithms, Cambridge, UK, edited by H. Christensen, W. Forstner and C. Madsen, pages 45-58, 1996.
184. M. Marya, L. G. Hector, R. Verma, andW. Tong. Microstructural effects of AZ31 magnesium alloy on its tensile deformation and failure behaviors. Materials Science and Engineering: A, 418(1-2):341-356, February 2006.
185. M. A. Matin, J. G. A. Theeven, W. P. Vellinga, and M. G. D. Geers. Correlation between localized strain and damage in shear-loaded Pb-free solders. Microelectronics Reliability, 47(8):1262-1272, August 2007.
186. M. J. McGinnis, S. Pessiki, and H. Turker. Application of three-dimensional digital image correlation to the core-drilling method. Experimental Mechanics, 45(4):359-367, August 2005.
187. D. M. McGowan, D. R. Ambur, T. Glen Hanna, and S. R. McNeill. Evaluating the compressive response of notched Composite panels using full-field displacements. Journal of Aircraft, 38(1):122-129, 2001.
188. T. O. McKinley and B. K. Bay. Trabecular bone strain changes associated with subchondral stiffening of the proximal tibia. Journal of Biomechanics, 36(2):155-163, February 2003.
189. S. R. McNeill,W. H. Peters, and M. A. Sutton. Estimation of stress intensity factor by digital image correlation. Engineering Fracture Mechanics, 28(1):101-112, 1987.
190. W. Mekky and P. S. Nicholson. The fracture toughness of Ni/Al2O3 laminates by digital image correlation II: Bridging-stresses and R-curve models. Engineering Fracture Mechanics, 73(5):583-592, March 2006.
191. W. Mekky and P. S. Nicholson. Modeling constrained metal behavior in ceramic/metal laminates. Composites Part B: Engineering, 39(3):497-504, April 2008.
192. A. Montepara, E. Romeo, R. Roncella, and G. Tebaldi. Local strain inhomogeneity in hot mix asphalt by digital image correlation. In Proceedings of Photomechanics 2006, Clermont-Ferrand, France, 2006.
193. C. L. Moore and H. A. Bruck. A fundamental investigation into large strain recovery of oneway shape memory alloy wires embedded in flexible polyurethanes. Smart Materials and Structures, 11(1):130-139, February 2002.
194. Y. Morimoto and M. Fujigaki. Automated analysis of 3-D shape and surface strain distributions of a moving object using stereo vision. Optics and Lasers in Engineering, 18(3):195-212, 1993.
195. R. Moser and J. G. Lightner III. Using three-dimensional digital imaging correlation techniques to validate tire finite-element model. Experimental Techniques, 31(4):29-36, July/August 2007.
196. G. Murasawa and S. Yoneyama. Local strain distribution arising in shape memory alloy composite subjected to thermal loading. Materials Transactions, 47(3):766-771, 2006.
197. G. Murasawa, S. Yoneyama, and T. Sakuma. Nucleation, bifurcation and propagation of local deformation arising in NiTi shape memory alloy. SmartMaterials and Structures, 16(1):160-167, February 2007.
198. K. Murata and M. Masuda. Microscopic observation of transverse swelling of latewood tracheid: Effect of macroscopic/mesoscopic structure. Journal ofWood Science, 52(4):283-289, 2006.
199. L. Muszyński. Empirical data for modeling: Methodological aspects in experimentation involving hygromechanical characteristics of wood. Drying Technology, 24(9):1115-1120, 2006.
200. D. V. Nelson, A. Makino, and T. Schmidt. Residual Stress Determination Using Hole Drilling and 3D Image Correlation. Experimental Mechanics, 46(1):31-38, February 2006.
201. D. P. Nicolella, A. E. Nicholls, J. Lankford, and D. T. Davy. Machine vision photogrammetry: a technique for measurement of microstructural strain in cortical bone. Journal of Biomechanics, 34(1):135-139, January 2001.
202. G. Nicoletto, G. Anzelotti, E. Riva, and R. Roncella. Mesomechanic strain fields in woven composites: Experiments vs. FEM modeling. In Proceedings of 3rd Workshop on OpticalMeasurement Techniques for Structures and Systems (OPTIMESS'2007), Leuven, Belgium, May 2007.
203. H. B. Nielsen. Cubic splines. Lecture notes, Department of Mathematical Modeling, Technical University of Denmark, 1998.
204. J.-J. Orteu, T. Cutard, D. Garcia, E. Cailleux, and L. Robert. Application of Stereovision to the Mechanical Characterisation of Ceramic Refractories Reinforced with Metallic Fibres. Strain, 43(2):96-108, May 2007.
205. J.-J. Orteu, V. Garric, andM. Devy. Camera calibration for 3D reconstruction: Application to the measure of 3D deformations on sheet metal parts. In SPIE Proceedings of European Symposium on Lasers, Optics and Vision in Manufacturing (EUROPTO), volume 3101, Munich, Germany, 1997.
206. J.-J. Orteu, Y. Rotrou, T. Sentenac, and L. Robert. An Innovative Method for 3-D Shape, Strain and Temperature Full-Field Measurement using a Single Type of Camera: Principle and Preliminary Results. Experimental Mechanics, 48(2):163-179, April 2008.
207. G. M. Owolabi and M. N. K. Singh. A comparison between two analytical models that approximate notch-root elastic-plastic strain-stress components in two-phase, particlereinforced, metal matrix composites under multiaxial cyclic loading: experiments. International Journal of Fatigue, 28(8):918-925, August 2006.
208. G. M. Owolabi and M. N. K. Singh. Erratum to "A comparison between two analytical models that approximate notch-root elasticplastic strainstress components in two-phase, particlereinforced, metal matrix composites under multiaxial cyclic loading: Experiments [Int. J. Fatigue 28 (2009) 918-925]". International Journal of Fatigue, 29(4):792, April 2007.
209. J. D. Pack, F. Noo, and R. Clackdoyle. Cone-beam reconstruction using the backprojection of locally filtered projections. Medical Imaging, 24(1):70-85, 2005.
210. B. Pan and H.-M. Xie. Digital image correlation method with differential evolution. Journal of Optoelectronics Laser, 18(1):100-103, 2007.
211. A. V. Panin, A. A. Panina, and Y. F. Ivanov. Deformation macrolocalisation and fracture in ultrafine-grained armco iron. Materials Science and Engineering: A, 486(1-2):267-272, July 2008.
212. S. Park, R. Dhakal, L. Lehman, and E. J. Cotts. Grain deformation and strain in board level snAgCu Solder Interconnects Under Deep Thermal Cycling. IEEE Transactions on Components and Packaging Technologies, 30(1):178-185, March 2007.
213. E. Parsons, M. C. Boyce, and D. M. Parks. An experimental investigation of the large-strain tensile behavior of neat and rubber-toughened polycarbonate. Polymer, 45:2665-2684, 2004.
214. J.-N. Périé, S. Calloch, C. Cluzel, and F. Hild. Analysis of a multiaxial test on a C/C composite by using digital image correlation and a damage model. Experimental Mechanics, 42(3):318-328, September 2002.
215. W. H. Peters and W. F. Ranson. Digital imaging techniques in experimental stress analysis. Optical Engineering, 21(3):427-431, 1982.
216. W. H. Peters, Z.-H. He, M. A. Sutton, and W. F. Ranson. Two-dimensional fluid velocity measurements by use of digital speckle correlation techniques. Experimental Mechanics, 24(2):171-121, 1984.
217. B. Peuchot. Camera virtual equivalent model - 0.01 pixel detector. In Proceedings of Computerized Medical Imaging and Graphics, 17:289-294, July 1993.
218. B. Peuchot. Utilisation de détecteurs subpixels dans la modélisation d'une caméra. In Actes du 9ème Congrès AFCET (RFIA'94), pages 691-695, Paris, France, January 1994.
219. N. S. Phatak, S. E. Kim, Q. Sun, D. L. Parker, R. K. Sanders, A. I. Veress, B. J. Ellis, and J. A. Weiss. Noninvasive determination of ligament strain with deformable image registration. Annals of Biomedical Engineering, 35(7):1175-1187, 2007.
220. G. P. Pires, M. H. Robert, and R. Arrieux. Studies on drawing of the aluminium A5052 alloy in the thixocast condition. Journal of Materials Processing Technology, 157-158:596-603, December 2004.
221. M. Pitter, C. W. See, and M. Somekh. Subpixel microscopic deformation analysis using correlation and artificial neural networks. Optics Express, 8(6):322-327, 2001.
222. O. Ple, E. Astudillo de la Vega, G. Bernier, and O. Bayard. Biaxial tensile behavior of the reactive powder concrete. ACI Special Publication, 209:369-388, September 2002.
223. A. Poitou, A. Ammar, Y. Marco, L. Chevalier, and M. Chaouche. Crystallization of polymers under strain: From molecular properties to macroscopic models. Computer Methods in Applied Mechanics and Engineering, 192(28-30):3245-3264, July 2003.
224. D. Post. White light moiré interferometry. Applied Optics, 24:4163-4167, 1979.
225. D. Post, P. Ifju, and B. T. Han. High Sensitivity Moiré. Springer, New York, 1994.
226. P. J. Rae, S. J. P. Palmer, H. T. Goldrein, A. L. Lewis, and J. E. Field. White-light digital image cross-correlation (DICC) analysis of the deformation of composite materials with random microstructure. Optics and Lasers in Engineering, 41(4):635-648, April 2004.
227. J. F. Rakow and A. M. Waas. Size effects in metal foam cores for sandwich structures. AIAA Journal, 42(7):1331-1337, July 2004.
228. R. S. Ramakrishna and B. Vaidvanathan. Error analysis in stereo vision. Proceedings ACCV'98, Book chapter with Lecture Notes in Computer Science, 1351:296-304, 1997. doi: 10.1007/3-540-63930-6.
229. O. Ravn, N. A. Andersen, and A. T. Sorensen. Auto-calibration in Automation Systems using Vision. In 3rd International Symposium on Experimental Robotics (ISER'93), pages 206-218, Japan, 1993.
230. D. T. Read, Y.-W. Cheng, R. R. Keller, and J. David McColskey. Tensile properties of freestanding aluminum thin films. Scripta Materialia, 45(5):583-589, September 2001.
231. A. L. Rechenmacher and R. J. Finno. Digital image correlation to evaluate shear banding in dilative sands. ASTM Geotechnical Testing Journal, 27(1):13-22, January 2004.
232. A. L. Rechenmacher. Grain-scale processes governing shear band initiation and evolution in sands. Journal of the Mechanics and Physics of Solids, 54(1):22-45, January 2006.
233. J. N. Reddy. An Introduction to Continuum Mechanics. Cambridge University Press, Cambridge, 2007.
234. J. Réthoré, A. Gravouil, F. Morestin, and A. Combescure. Estimation of mixed-mode stress intensity factors using digital image correlation and an interaction integral. International Journal of Fracture, 132(1):65-79, March 2005.
235. J. Réthoré, F. Hild, and S. Roux. Shear-band capturing using a multiscale extended digital image correlation technique. Computer Methods in Applied Mechanics and Engineering, 196(49-52):5016-5030, November 2007.
236. J. Réthoré, F. Hild, and S. Roux. Extended digital image correlation with crack shape optimization. International Journal for Numerical Methods in Engineering, 73(2):258-272, 2008.
237. J. Réthoré, S. Roux, and F. Hild. An extended and integrated digital image correlation technique applied to the analysis fractured samples. European Journal of Computational Mechanics, in press, 2008.
238. J. Réthoré, S. Roux, and F. Hild. From pictures to extended finite elements: extended digital image correlation (X-DIC). Comptes Rendus Mécanique, 335(3):131-137, March 2007.
239. J. Réthoré, S. Roux, and F. Hild. Noise-robust stress intensity factor determination from kinematic field measurements. Engineering Fracture Mechanics, 75(13):3763-3781, September 2008.
240. M. R. Riahi, H. Latifi, and M. Sajjadi. Speckle correlation photography for the study of water content and sap flow in plant leaves. Applied Optics, 45(29):7674-7678, October 2006.
241. W. T. Riddell, R. S. Piascik, M. A. Sutton, W. Zhao, S. R. McNeill, and J. D. Helm. Local Crack Closure Measurements: Determination of Fatigue Crack Opening Loads from Near-Crack-Tip Measurements. In R. C. McClung and J. C. Newman, Jr., editors, Advances in Fatigue Crack Closure Measurements and Analysis, pages 157-174. ASTM STP 1343,West Conshohocken, PA, 1999.
242. L. Robert, F. Nazaret, T. Cutard, and J.-J. Orteu. Use of 3-D digital image correlation to characterize the mechanical behavior of a fiber reinforced refractory castable. Experimental Mechanics, 47(6):761-773, December 2007.
243. A. Rosenfeld. From image analysis to computer vision: An annotated bibliography, 1955-1979. Computer Vision and Image Understanding, 84:298-324, 2001.
244. K. L. Ruggy and B. N. Cox. Deformation mechanisms of dry textile preforms under mixed compressive and shear loading. Journal of Reinforced Plastics and Composites, 23(13): 1425-1442, September 2004.
245. S. S. Russell, M. A. Sutton, and H. S. Chen. Image correlation quantitative NDE of impact and fabrication damage in a glass fiber reinforced composite system. Journal for Materials Evaluation, 47(5):550-558, 1989.
246. N. Sabaté, D. Vogel, A. Gollhardt, J. Marcos, I. Gràcia, C. Cané, and B. Michel. Digital image correlation of nanoscale deformation fields for local stress measurement in thin films. Nanotechnology, 17(20):5264-5270, October 2006.
247. L. Salvo, P. Belestin, E. Maire, M. Jacquesson, C. Vecchionaci, E. Boller, M. Bornert, and P. Doumalin. Structure and mechanical properties of AFS sandwiches studied by in situ compression tests in X-ray microtomography. Advanced Engineering Materials, 6(6):411-415, 2004.
248. F. M. Sánchez and G. Pulos. Micro and macromechanical study of stress-induced martensitic transformation in a Cu-Al-Be polycrystalline shape memory alloy. Materials Science Forum, 509:87-92, 2006.
249. A. Savitzky and M. J. E. Golay. Smoothing and differentiation of data by simplified least squares procedures. Analytical Chemistry, 36:1627-1639, 1964.
250. T. E. Schmidt, J. Tyson, and K. Galanulis. Full-field dynamic displacement and strain measurement - specific examples using advanced 3D image correlation photogrammetry: Part II. Experimental Techniques, 27(4):22-26, July 2003.
251. T. E. Schmidt, J. Tyson, and K. Galanulis. Full-field dynamic displacement and strain measurement using advanced 3D image correlation photogrammetry: Part I. Experimental Techniques, 27(3):47-50, May 2003.
252. H. W. Schreier, J. Braasch, and M. A. Sutton. Systematic errors in digital image correlation caused by intensity interpolation. Optical Engineering, 39(11):2915-2921, 2000.
253. H.W. Schreier and M. A. Sutton. Systematic errors in digital image correlation due to undermatched subset shape functions. Experimental Mechanics, 42(3):303-310, September 2002.
254. H. W. Schreier, D. Garcia, and M. A. Sutton. Advances in light microscope stereo vision. Experimental Mechanics, 44(3):278-288, June 2004.
255. W. A. Scrivens, Y. Luo, M. A. Sutton, S. A. Collette, M. L. Myrick, P. Miney, P. E. Colavita, A. P. Reynolds, and X. Li. Development of patterns for digital image correlation measurements at reduced length scales. Experimental Mechanics, 47(1):63-77, February 2007.
256. Y. Seo, Y. R. Kim, M. W. Witczak, and R. Bonaquist. Application of digital image correlation method to mechanical testing of asphalt-aggregate mixtures. Transportation Research Record, 1789:162-172, 2002.
257. William N. Sharpe, Jr., editor, Springer Handbook of Experimental Solid Mechanics. Springer, Berlin, 2008. ISBN: 0-387-34362-8.
258. X. Q. Shi, Z. P. Wang, and J. P. Pickering. A new methodology for the characterization of fracture toughness of filled epoxy films involved in microelectronics packages. Microelectronics Reliability, 43(7):1105-1115, July 2003.
259. X. Q. Shi, Y. L. Zhang, and W. Zhou. Determination of fracture toughness of underfill/chip interface with digital image speckle correlation technique. IEEE Transactions on Components and Packaging Technologies, 30(1):101-109, March 2007.
260. T. Siebert, T. Becker, K. Spiltthof, I. Neumann, and R. Krupka. High-speed digital image correlation: Error estimations and applications. Optical Engineering, 46(5):051004 (7 pages), May 2007.
261. G. Sierra, B. Wattrisse, and C. Bordreuil. Structural analysis of steel to aluminum welded overlap joint by digital image correlation. Experimental Mechanics, 48(2):213-223, April 2008.
262. M. Sjödahl. Electronic speckle photography: Increased accuracy by nonintegral pixel shifting. Applied Optics, 33:6667-6673, October 1994.
263. M. Sjödahl. Accuracy in electronic speckle photography. Applied Optics, 36(13):2875-2885, May 1997.
264. M. Sjödahl. Some recent advances in electronic speckle photography. Optics and Lasers in Engineering, 29(2-3):125-144, March 1998.
265. T. S. Smith, B. K. Bay, andM.M. Rashid. Digital volume correlation including rotational degrees of freedom during minimization. Experimental Mechanics, 42(3):272-278, September 2002.
266. B. Stanford, R. Albertani, and P. Ifju. Static Finite Element Validation of a Flexible Micro Air Vehicle. Experimental Mechanics, 47(2):283-294, April 2007.
267. K. A. Stetson. New design for laser image speckle interferometer. Optics and Laser Technology, 2:179-181, 1970.
268. G. Strang. Linear Algebra and Its Applications. Academic Press, 2nd edition, New York, 1980.
269. K. V. Subramaniam, C. Carloni, and L. Nobile. Width effect in the interface fracture during shear debonding of FRP sheets from concrete. Engineering Fracture Mechanics, 74(4):578-594, March 2007.
270. Y. Sun and J. H. L. Pang. AFM image reconstruction for deformation measurements by digital image correlation. Nanotechnology, 17(4):933-939, February 2006.
271. Y. Sun and J. H. L. Pang. Study of optimal subset size in digital image correlation of speckle pattern images. Optics and Lasers in Engineering, 45(9):967-974, September 2007.
272. Y. Sun and J. H. L. Pang. Digital image correlation for solder joint fatigue reliability in microelectronics packages. Microelectronics Reliability, 48(2):310-318, 2008.
273. Y. Sun, J. H. L. Pang, C. K. Wong, and F. Su. Finite element formulation for a digital image correlation method. Applied Optics, 44(34):7357-7363, December 2005.
274. Z. Sun, J. S. Lyons, and S. R. McNeill. Measuring microscopic deformations with digital image correlation. Optics and Lasers in Engineering, 27(4):409-428, July 1997.
275. H. J. Sung, S.-H. Park, and M. S. Kim. Accuracy of correlation-based image registration for pressure-sensitive paint. Experiments in Fluids, 39(3):630-635, September 2005.
276. H. Jin Sung, S.-H. Park, and M. S. Kim. Erratum to "accuracy of correlation-based image registration for pressure-sensitive paint" [Exp. in Fluids 39 (2005) 630-635]. Experiments in Fluids, 40(4):664-664, April 2006.
277. M. A. Sutton. Digital image correlation. In W. N. Sharpe, Jr., editor, Springer Handbook of Experimental Solid Mechanics, Springer, Berlin, 2008. ISBN: 978-0-387-26883-5.
278. M. A. Sutton, T. L. Chae, J. L. Turner, and H. A. Bruck. Development of a Computer Vision Methodology for the Analysis of Surface Deformations in Magnified Images. In G. F. Vander Voort, editor, MiCon 90: Advances in Video Technology for Microstructural Control, pages 109-132. ASTM STP 1094, Philadelphia, PA, 1991.
279. M. A. Sutton and Y. J. Chao. Measurement of strains in a paper tensile specimen using computer vision and digital image correlation - part 1: Data acquisition and image analysis system. Tappi Journal, 70(3):173-175, 1988.
280. M. A. Sutton, M. Q. Cheng, W. H. Peters, Y. J. Chao, and S. R. McNeill. Application of an optimized digital correlation method to planar deformation analysis. Image and Vision Computing, 4(3):143-150, August 1986.
281. M. A. Sutton, X. Ke, S. M. Lessner, M. Goldbach, M. Yost, F. Zhao, and H. W. Schreier. Strain field measurements on mouse carotid arteries using microscopic three dimensional digital image correlation. Journal of Biomedical Materials Research Part A, 84(1):178-190, July 2008.
282. M. A. Sutton, N. Li, D. Garcia, N. Cornille, J.-J. Orteu, S. R. McNeill, H. W. Schreier, and X. Li. Metrology in a scanning electron microscope: Theoretical developments and experimental validation. Measurement Science and Technology, 17(10):2613-2622, August 2006. ISSN 0957-0233.
283. M. A. Sutton, N. Li, D. Garcia, N. Cornille, J.-J. Orteu, S. R. McNeill, H. W. Schreier,b X. Li, and A. P. Reynolds. Scanning electron microscopy for quantitative small and large deformation measurements part II: Experimental validation for magnifications from 200 to 10,000. Experimental Mechanics, 47(6):789-804, December 2007.
284. M. A. Sutton, N. Li, D. C. Joy, A. P. Reynolds, and X. Li. Scanning Electron microscopy for quantitative small and large deformation measurements part I: SEM imaging at magnifications from 200 to 10,000. Experimental Mechanics, 47(6):775-787, December 2007.
285. M. A. Sutton, S. R. McNeill, J. D. Helm, and Y. J. Chao. Advances in two-dimensional and three-dimensional computer vision. In P. K. Rastogi, editor, Photomechanics, Topics in Applied Physics. Springer, Berlin, 2000.
286. M. A. Sutton, S. R. McNeill, J. D. Helm, and H. W. Schreier. Computer vision applied to shape and deformation measurement. In P. K. Rastogi and D. Inaudi, editors, Trends in Optical Nondestructive Testing and Inspection. Elsevier Science, Amsterdam, 2000.
287. M. A. Sutton, S. R. McNeill, J. Jang, and M. Babai. Effects of sub-pixel image restoration on digital correlation error. Optical Engineering, 27(10):870-877, 1988.
288. M. A. Sutton,W. J.Wolters,W. H. Peters,W. F. Ranson, and S. R.McNeill. Determination of displacements using an improved digital correlation method. Image and Vision Computing, 1(3):133-139, August 1983.
289. M. A. Sutton, J. H. Yan, V. Tiwari, H. W. Schreier, and J.-J. Orteu. The effect of out of plane motion on 2D and 3D digital image correlation measurements. Optics and Lasers in Engineering, 46(10):746-757, October 2008.
290. M. A. Sutton, W. Zhao, S. R. McNeill, J. D. Helm, R. S. Piascik, and W. T. Riddell. Local crack closure measurements: Development of a measurement system using computer vision and a far-field microscopy. In R. C. McClung and J. C. Newman, Jr., editors. Advances in Fatigue Crack Closure Measurement and Analysis, pages 145-156, ASTM STP 1343, West Conshohocken, PA, USA, November, 1997.
291. M. A. Sutton and Y. J. Chao. Computer vision in fracture mechanics. Experimental Techniques in Fracture, pages 59-94, 1993.
292. M. A. Sutton, Y. J. Chao, and J. S. Lyons. Computer vision methods for surface deformation measurements in fracture mechanics. In J. S. Epstein, editor, ASME-AMD Novel Experimental Methods in Fracture, 176:123-133, 1993. ISBN: 978-0-471-18865-0.
293. M. A. Sutton, S. R. McNeill, J. D. Helm, and Y. J. Chao. Advances in two-dimensional and three-dimensional computer vision. In P. K. Rastogi, editor, Photomechanics, Topics in Applied Physics. Springer, Berlin, 2000.
294. M. A. Sutton, J. L. Turner, T. L. Chae, and H. A. Bruck. Full field representation of discretely sampled surface deformation for displacement and strain analysis. Experimental Mechanics, 31(2):168-177, 1991.
295. M. A. Sutton, J. L. Turner, Y. J. Chao, H. A. Bruck, and T. L. Chae. Experimental investigations of three-dimensional effects near a crack tip using computer vision. International Journal of Fracture, 53(3):201-228, February 1992.
296. M. A. Sutton, S. R. McNeill, J. D. Helm, and M. L. Boone.Measurement of crack tip opening displacement and full-field deformations during fracture of aerospace materials using 2D and 3D image correlation methods. In A. Lagarde, editor, IUTAM Symposium on Advanced Optical Methods and Applications in Solid Mechanics, 82:571-580, Springer, Netherlands, 1998.
297. M. A. Sutton, B. Wan, M. F. Petrou, and K. Harries. Two-dimensional computer vision to investigate FRP-concrete bond toughness. Advanced Measurement Methods, 1, 2002.
298. M. A. Sutton, J. Yan, X. Deng, C.-S. Cheng, and P. Zavattieri. Three-dimensional digital image correlation to quantify deformation and crack-opening displacement in ductile aluminum under mixed-mode I/III loading. Optical Engineering, 46(5):051003 (17 pages), May 2007.
299. M. A. Sutton, B. Yang, A. P. Reynolds, and J. Yan. Banded microstructure in 2024-T351 and 2524-T351 aluminum friction stir welds: Part II. Mechanical characterization. Materials Science and Engineering: A, 364(1-2):66-74, January 2004.
300. P. Synnergren and M. Sjödahl. A stereoscopic digital speckle photography system for 3-D displacement field measurements. Optics and Lasers in Engineering, 31(6):425-443, June 1999.
301. P. Synnergren. Measurement of three-dimensional displacement fields and shape using electronic speckle photography. Optical Engineering, 36(8):2302-2310, August 1997.
302. P. Synnergren and H. Timothy Goldrein. Dynamic measurements of internal threedimensional displacement fields with digital speckle photography and flash X rays. Applied Optics, 38(28):5956-5961, October 1999.
303. H. Tan, C. Liu, Y. Huang, and P. H. Geubelle. The cohesive law for the particle/matrix interfaces in high explosives. Journal of the Mechanics and Physics of Solids, 53(8):1892-1917, August 2005.
304. C. Tang. A new synthetical algorithm for digital image correlation method and its application in the fracture. Optical Technique, 29(1):69-72, 2003.
305. Q. Tian and M. N. Huhns. Algorithms for subpixel registration. Computer Vision, Graphics, and Image Processing, 35(2):220-233, August 1986.
306. V. Tiwari, M. A. Sutton, and S. R. McNeill. Assessment of high speed imaging systems for 2D and 3D deformation measurements: Methodology development and validation. Experimental Mechanics, 47(4):561-579, August 2007.
307. W. Tong. Strain characterization of propagative deformation bands. Journal of the Mechanics and Physics of Solids, 46(10):2087-2102, October 1998.
308. W. Tong. Detection of plastic deformation patterns in a binary aluminum alloy. Experimental Mechanics, 37(4):452-459, December 1997.
309. W. Tong, H. Tao, X. Jiang, N. Zhang, M. P. Marya, L. G. Hector, and X. Q. Gayden. Deformation and fracture of miniature tensile bars with resistance-spot-weld microstructures. Metallurgical and Materials Transactions A, 36(10):2651-2669, October 2005.
310. V. Tvergaard. Cohesive zone representations of failure between elastic or rigid solids and ductile solids. Engineering Fracture Mechanics, 70(14):1859-1868, 2003.
311. J. Tyson, T. Schmidt, and K. Galanulis. Biomechanics deformation and strain measurements with 3D image correlation photogrammetry. Experimental Techniques, 26(5):39-42, September 2002.
312. S. Ukyo and M. Masuda. Fracture analysis of wood in moment-resisting joints with four drift-pins using digital image correlation method (DIC). Journal of the Society of Materials Science, Japan, 51(4):367-372, 2002.
313. S. Ukyo and M. Masuda. Investigation of the true stress-strain relation in shear using the digital image correlation method. Journal of the Japan Wood Research Society, 50(3):146-150, 2004.
314. E. Umezaki and K. Futase. Deformation behaviour of the cross-section of a heat-sealed area in plastic film used for liquid package bags. The Journal of Strain Analysis for Engineering Design, 32(1):29-35, 1997.
315. E. Umezaki and T. Ichikawa. Measurement of deformation of epoxy resin plates with an embedded SMA wire using digital image correlation. International Journal of Modern Physics B, 17(8-9):1750-1755, 2003.
316. M. Unser, A. Aldroubi, and M. Eden. B-spline processing part 2 - efficient design and applications. IEEE Trans. Signal Processing, 41(2):834-847, 1993.
317. M. Unser, A. Aldroubi, and M. Eden. B-spline processing part I - theory. IEEE Transactions on Signal Processing, 41(2):821-833, 1993.
318. A. Vagnon, O. Lame, D. Bouvard, M. Di Michiel, D. Bellet, and G. Kapelski. Deformation of steel powder compacts during sintering: Correlation between macroscopic measurement and in situ microtomography analysis. Acta Materialia, 54(2):513-522, January 2006.
319. M. F. Vallat, P. Martz, J. Fontaine, and J. Schultz. The application of coherent optics to the study of adhesive joints. I. Speckle photography. Journal of Applied Polymer Science, 31(2):309-321, February 1986.
320. D. VanArsdale. Homogeneous transformation matrices for computer graphics. Computers & Graphics, 18(2):177-191, 1994.
321. G. Vendroux and W. G. Knauss. Submicron deformation field measurements: Part 1. Developing a digital scanning tunneling microscope. Experimental Mechanics, 38(1):18-23, March 1998.
322. G. Vendroux andW. G. Knauss. Submicron deformation field: Part 2. Improved digital image correlation. Experimental Mechanics, 38(2):86-92, June 1998.
323. G. Vendroux, N. Schmidt, and W. G. Knauss. Submicron deformation field measurements: Part 3. Demonstration of deformation determinations. Experimental Mechanics, 38(3):154-160, September 1998.
324. A. I. Veress, N. S. Phatak, and J. A. Weiss. Deformable image registration with hyperelastic warping. In Evangelia Micheli-Tzanakou, Jasjit S. Suri, David L. Wilson, and Swamy Laxminarayan, editors, Handbook of Medical Image Analysis: Advanced Segmentation and Registration Models, 2003.
325. A. I. Veress, J. A.Weiss, G. T. Gullberg, D. G. Vince, and R. D. Rabbitt. Strain measurement in coronary arteries using intravascular ultrasound and deformable images. ASME Journal of Biomech Engineering, 124:734-741, 2003.
326. E. Verhulp, B. van Rietbergen, and R. Huiskes. A three-dimensional digital image correlation technique for strain measurements in microstructures. Journal of Biomechanics, 37(9):1313-1320, September 2004.
327. C. M. Vest. Holographic Interferometry. Wiley, New York, 1979.
328. P. Vialettes, J.-M. Siguier, P. Guigue, M. Karama, S. Mistou, O. Dalverny, S. Granier, and F. Petitjean. Experimental and numerical simulation of super-pressure balloon apex section: Mechanical behavior in realistic flight conditions. Advances in Space Research, 37(11):2082-2086, 2006.
329. J. H. Vogel and D. Lee. An automated two-view method for determining strain distributions on deformed surfaces. Journal of Material Shaping Technology, 6(4):205-216, 1989.
330. B. Wan, M. A. Sutton, M. F. Petrou, K. A. Harries, and N. Li. Investigation of bond between fiber reinforced polymer and concrete undergoing global mixed mode I/II loading. Journal of Engineering Mechanics, 130(12):1467-1475, 2004.
331. Christopher C.-B.Wang, N. O. Chahine, C. T. Hung, and G. A. Ateshian. Optical determination of anisotropic material properties of bovine articular cartilage in compression. Journal of Biomechanics, 36(3):339-353, March 2003.
332. Christopher C.-B. Wang, Jian-Ming Deng, Gerard A. Ateshian, and Clark T. Hung. An automated approach for direct measurement of two-dimensional strain distributions within articular cartilage under unconfined compression. Journal of Biomechanical Engineering, 124(5):557-567, 2002.
333. Y. Wang and A. M. Cuitiño. Full-field measurements of heterogeneous deformation patterns on polymeric foams using digital image correlation. International Journal of Solids and Structures, 39(13):3777-3796, June 2002.
334. Y.Wang, G. Gioia, and A. M. Cuitiño. The deformation habits of compressed open-cell solid foams. Journal of Engineering Materials and Technology, 122(4):376-378, October 2000.
335. Y. Q. Wang, M. A. Sutton, and H. W. Schreier, Quantitative error assessment in 3D stereovision, in review.
336. Y. Q. Wang, M. A. Sutton, and H. W. Schreier. Quantitative error assessment in pattern matching: Effect of interpolation, intensity pattern noise and contrast, subset size on motion accuracy. International Journal of Strain, in press 2008.
337. A. Wasil and D.C. Merchant. Plate-deflection measurement by photogrammetric methods. Experimental Mechanics, 4(3):77-83, March 1964.
338. G. O. Williams, V. Randle, J. R. Cowan, and P. Spellward. The role of misorientation and phosphorus content on grain growth and intergranular fracture in iron-carbon-phosphorus alloys. Journal of Microscopy, 213(3):321-327, March 2004.
339. H.Wolf, D. König, and Th. Triantafyllidis. The influence of the stress-strain behavior of noncohesive soils on the geometry of shear band systems under extensional strain. Engineering Structures, 28(13):1760-1773, November 2006.
340. L. Xu and J. H. L. Pang. In-situ electromigration study on Sn-Ag-Cu solder joint by digital image speckle analysis. Journal of Electronic Materials, 35(11):1993-1999, November 2006.
341. Z.-H. Xu, M. A. Sutton, and X. D. Li. Drift and spatial distortion elimination in atomic force microscopy images by digital image correlation techniques. The Journal of Strain Analysis for Engineering Design, 43(8):729-743, 2008.
342. Z.-H. Xu, M. A. Sutton, and X. D. Li. Mapping nanoscale wear field by combined atomic force microscopy and digital image correlation techniques. Acta Materialia, 56(20):6304-6309, December 2008.
343. I. Yamaguchi. Automatic measurement of in-plane translation by speckle correlation using a linear image sensor. Journal of Physics E - Scientific Instruments, 19(11):944-948, November 1986.
344. S. Yoneyama, Y. Morimoto, and M. Takashi. Automatic evaluation of mixed-mode stress intensity factors utilizing digital image correlation and nonlinear least-squares. Journal of Japanese Society for Non-Destructive Inspection, 51(10):667-673, 2002.
345. S. Yoneyama, Y. Morimoto, and M. Takashi. Automatic evaluation of mixed-mode stress intensity factors utilizing digital image correlation. Strain, 42(1):21-29, February 2006.
346. S. Yoneyama, T. Ogawa, and Y. Kobayashi. Evaluating mixed-mode stress intensity factors from full-field displacement fields obtained by optical methods. Engineering Fracture Mechanics, 74(9):1399-1412, June 2007.
347. D. Zhang, D. D. Arola, R. K. Reprogel, W. Zheng, U. Tasch, and R. M. Dyer. A method for characterizing the mechanical behaviour of hoof horn. Journal of Materials Science, 42(4):1108-1115, January 2007.
348. D. Zhang, C. D. Eggleton, and D. D. Arola. Evaluating the mechanical behavior of arterial tissue using digital image correlation. Experimental Mechanics, 42(4):409-416, December 2002.
349. J. Zhang, M. Li, C. Y. Xiong, J. Fang, and S. Yi. Thermal deformation analysis of BGA package by digital image correlation technique. Microelectronics International, 22(1):34-42, January 2005.
350. J. Zhang, G. Jin, S. Ma, and L. Meng. Application of an improved subpixel registration algorithm on digital speckle correlation measurement. Optics & Laser Technology, 35(7):533-542, October 2003.
351. W. Zhang and X. Deng. Formulation of a cohesive zone model for a mode III crack. Engineering Fracture Mechanics, 72(12):1818-1829, 2005.
352. Z.-F. Zhang, Y.-L. Kang, H.-W. Wang, Q.-H. Qin, Y. Qiu, and X.-Q. Li. A novel coarse-fine search scheme for digital image correlation method. Measurement, 39(8):710-718, October 2006.
353. J. Zhou, Z. Gao, S. Allameh, E. Akpan, A. Cuitiño, andW. Soboyejo. Multiscale deformation of open cell aluminum foams. Mechanics of Advanced Materials and Structures, 12(3):201-216, May-June 2005.
354. J. Zhou, Z. Gao, A. M. Cuitiño, and W. O. Soboyejo. Effects of heat treatment on the compressive deformation behavior of open cell aluminum foams. Materials Science and Engineering: A, 386(1-2):118-128, November 2004.
355. A. G. Zink, R. W. Davidson, and R. B. Hanna. Strain measurement in wood using a digital image correlation technique. Wood and Fiber Science, 27(4):346-359, 1995.