Coupling between experimental measurements and polycrystal finite element calculations for micromechanical study of metallic materials

International Journal of Plasticity

Volumn 23, Issue 9, 2007, Pages 1512-1539

  Heripre E ^a,c   Dexet, M ^a,b   Crepin J ^a   Gelebart L ^b   Roos, A ^c   Bornert, M ^a   Caldemaison, D ^a  

^a LABORATOIRE DE MÉCANIQUE DES SOLIDES   (France)

^b CEA SACLAY   (France)

^c ONERA   (France)

Author keywords

Crystal plasticity; Finite element simulation; Full field measurements

Indexed keywords

COMPUTER SIMULATION; CRYSTALLOGRAPHY; FINITE ELEMENT METHOD; MICROMECHANICS; MICROSTRUCTURE; MORPHOLOGY; POLYCRYSTALS;

CRYSTAL PLASTICITY; CRYSTALLOGRAPHIC ORIENTATION; FULL FIELD MEASUREMENTS; MULTISCALE COUPLING;

ZIRCONIUM ALLOYS;

EID: 34248667555     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2007.01.009     Document Type: Article

References (53)

1. Allais L., Bornert M., Bretheau T., and Caldemaison D. Experimental characterization of the local strain field in a heterogeneous elastoplastic material. Acta Metal. Mater. 42 11 (1994) 3865-3880
2. Asaro R.J. Crystal plasticity. J. Appl. Mech. 50 (1983) 921-934
3. Barbe, F. 2000. Etude numérique de la plasticité d'agrégats polycristallins. PhD. Thesis, Ecole Nationale Supérieure des Mines de Paris, France.
4. Barbe F., Decker L., Jeulin D., and Cailletaud G. Intergranular and intragranular behavior of polycrystalline aggregates. Part 1: F.E. model. Int. J. Plast. 17 (2001) 513-536
5. Barbe F., Forest S., and Cailletaud G. Intergranular and intragranular behavior of polycrystalline aggregates. Part 2: Results. Int. J. Plast. 17 (2001) 537-563
6. Becker R., and Panchanadeeswaran S. Effects of grain interactions on deformation and local texture in polycrystals. Acta. Metal. Mater. 43 7 (1995) 2701-2719
7. Biery N., de Graef M., and Pollock T. Influence of microstructure and strain distribution on failure properties in intermetallic TiAl-based alloys. Mater. Sci. Eng. A 319-321 (2001) 613-617
8. Bornert M., Masson R., Ponte Castaneda P., and Zaoui A. Second-order estimates for the effective behaviour of viscoplastic polycrystalline materials. J. Mech. Phys. Solids 49 11 (2001) 2737-2764
9. Brenner R., Bechade J.L., Castelnau O., and Bacroix B. Thermal creep of Zr-Nb1%-O alloys: experimental analysis and micromechanical modeling. J. Nucl. Mater. 305 (2002) 175-186
10. Cailletaud G., Forest S., Jeulin D., Feyel F., Galliet I., Mounoury V., and Quilici S. Some elements of microstructural mechanics. Comp. Mater. Sci. 27 (2003) 351-374
11. Cast3M, 2005. Available from http://www.cast3m.cea.fr.
12. Claire D., Hild F., and Roux F. A finite element formulation to identify damage fields: the equilibrium gap method. Int. J. Numer. Meth. Engng 61 (2004) 189-208
13. Clayton J.D., and McDowell D.L. Homogenized finite elastoplasticity and damage : theory and computations. Mech. Mater. 36 (2004) 799-824
14. CorrelManuV., 2005. Available from: .
15. Diard O., Leclercq S., Rousselier G., and Cailletaud G. Distribution of normal stress at grain boundaries in multicrystals: application to an intergranular damage modeling. Comp. Mater. Sci. 25 (2002) 73-84
16. Doumalin P., Bornert M., and Crépin J. Caractérisation de la répartition de la déformation dans les matériaux hétérogènes. Méc. et Ind. 4 (2003) 607-617
17. Eriau, P., 2003. Etude des hétérogénéités de déformation et leur lien avec la recristallisation d'alliages industriels. Ph.D. thesis, Ecole Centrale des Arts et Manufactures de Paris, Chatenay Malabry, France.
18. Gélébart L., Dexet M., Sauzay M., Crépin J., and Roos A. Identification of crystalline behaviour on macroscopic response and local strain field analysis. J. ASTM Int. 1 9 (2004) 585-601
19. Geymonat G., Hild F., and Pagano S. Identification of elastic parameter by displacement field measurement. C.R. mécanique 330 (2002) 403-408
20. Goh C.H., McDowell D.L., and Neu R.W. Plasticity in polycrystalline fretting fatigue contacts. J. Mech. Phys. Solids 54 (2006) 340-367
21. Grédiac M., and Vautrin A. A new method for determination of bending rigidities of thin anisotropic plates. J. Appl. Mech. 57 (1990) 964-968
22. Grédiac M., Toussaint E., and Pierron F. Special virtual fields for the direct determination of material parameters with the virtual fields method. 2-Application to in-plane properties. Int. J. Sol. Struct. 39 (2002) 2707-2730
23. Gürdal Z., and Haftka R. Elements of Structural Optimization (1992), Kluwer Academic Publishers
24. Haddadi H., Héraud S., Allais L., Teodosiu C., and Zaoui A. A numerical mesoscope for the investigation of local fields in rate-dependent elastoplastic materials at finite strain. In: Miehe Ch. (Ed). Symposium IUTAM Computational Mechanics of Solid Materials at Large Strains (2003), Kluwer Academic Publisher, The Netherlands 311-320
25. Harder J. A crystallographic model for the study of local deformation processes in polycrystals. Int. J. Plast. 6 (1999) 605-624
26. Héraud, S., 1998. Du polycristal au multicristal: élaboration d'un mésoscope numérique pour une analyse locale en élastoviscoplasticité, Ph.D. thesis, Ecole Polytechnique, Palaiseau, France.
27. Héripré, E., Crépin, J., Roos, A., Gélébart, L., Chaboche, J.-L., 2004. Parameter identification of a crystallographic constitutive law using local strain fields. SEM X International Congress, Costa Mesa, USA.
28. Hild F., Raka B., Baudequin M., Roux S., and Cantelaube F. Multiscale displacement field measurements of compressed mineral-wool samples by digital image correlation. Appl. Opt. 41 32 (2002) 6815-6828
29. Hoc T., and Forest S. Polycristal modelling of IF-Ti steel under complex loading. Int. J. Plast. 17 (2001) 65-85
30. Hoc T., Crépin J., Gélébart L., and Zaoui A. A procedure for identifying the plastic behavior of single crystals from the local response of polycrystals. Acta Mater 51 (2003) 5477-5488
31. Juul Jensen D., Lauridsen E.M., Margulies L., Poulsen H.F., Schmidt S., Sørensen H.O., and Vaughan G.B.M. X-ray microscopy in four dimensions. Mater. Today 9 1-2 (2006) 18-25
32. Letouzé N., Brenner R., Castelnau O., Béchade J.L., and Mathon M.H. Residual strain distribution in Zircaloy-4 measured by neutron diffraction and estimated by homogenization techniques. Script. Mater. 47 9 (2002) 595-599
33. Lippmann N., Steinkopff Th., Schmauder S., and Gumbsch P. 3-D finite-element-modeling of microstructures with the method of multiphase elements. Comp. Mater. Sci. 9 (1997) 28-35
34. Liu Y.L., and Fischer G. In situ measurement of local strain in a metal matrix composite by the object grating technique. Scripta Mater 36 10 (1997) 1187-1194
35. MacDowell A.A., Celestre R.S., Tamura N., Spolenak R., Valek B., Brown W.L., Bravman J.C., Padmore H.A., Batterman B.W., and Patel J.R. Submicron X-ray diffraction. Nucl. Instrum. Methods Phys. Res. (2001) 936-943
36. Masson R., Bornert M., Suquet P., and Zaoui A. An affine formulation for the prediction of the effective properties of nonlinear composites and polycrystals. J. Mech. Phys. Solids 48 6-7 (2000) 1203-1227
37. Meuwissen M.H.H., Oomens C.W.J., Baaijens F.P.T., Petterson R., and Janssen J.D. Determination of elasto-plastic properties of aluminium using a mixed numerical-experimental method. J. Mater. Proc. Tech. 75 (1998) 204-211
38. Moes N., Dolbow J., and Belytschko T. A finite element method for crack growth without remeshing. Int. Numer. Methods Eng. 46 (1999) 131-150
39. Needleman A. A continuum model for void nucleation by inclusion debonding. J. Appl. Mech. 54 (1987) 525-531
40. Ponte Castaneda P., and Suquet P. Nonlinear composites. Adv. Appl. Mech. 34 (1998) 171-302
41. Prasad G.V.S.S., Goerdeler M., and Gottstein G. Work hardening model based on multiple dislocation densities. Mater. Sci. Eng. A (2005) 231-233
42. Raabe D., Sachtleber M., Zhao Z., and Zaefferer S. Micromechanical and macromechanical effects in grain scale polycrystal plasticity experimentation and simulation. Acta Mater. 49 (2001) 3433-3441
43. Rekik A., Bornert M., Auslender F., and Zaoui A. A methodology for an accurate evaluation of the linearization procedures in nonlinear mean field homogenization. C.R. Mécanique 333 11 (2005) 789-795
44. Sachtleber M., Zhao Z., and Raabe D. Experimental investigation of plastic grain interaction. Mater. Sci. Eng. A 336 (2002) 81-87
45. Schroeter B.M., and McDowell D.L. Measurement of deformation fields in polycristalline OFHC copper. Int. J. Plast. 19 (2003) 1355-1376
46. Soh A.K. Development of special multi-material elements. Int. J. Sol. Struct. 37 (2000) 899-918
47. Staroselsky A., and Anand L. Inelastic deformation of polycrystalline face centered cubic materials by slip and twinning. J. Mech. Phys. Solids 46 4 (1998) 671-696
48. Tatschl A., and Kolednik O. A new tool for the experimental characterization of micro-plasticity. Mater. Sci. Eng. A 339 1-2 (2003) 265-280
49. Tenchkoff, E., 1988. Deformation mechanisms, texture and anisotropy in zirconium and zircaloy. ASTM, special technical Publication, STP 966.
50. Tomé C.N., Maudlin P.J., Lebensohn R.A., and Kaschner G.C. Mechanical response of zirconium-I Derivation of a polycrystal constitutive law and finite element analysis. Acta Mater. 49 (2001) 3085-3096
51. Watanabe O., Zbib H.M., and Takenouchi E. Crystal plasticity: Micro-shear banding in polycrystals using Voronoi tessellation. Int. J. Plast. 14 8 (1998) 771-788
52. Willis J.R. Variational and related method for the overall properties of composites. Adv. Appl. Mech. 21 (1981) 1-78
53. ZeBuLoN, 2002. Available from: .