An innovative method for 3-D shape, strain and temperature full-field measurement using a single type of camera: Principle and preliminary results

Experimental Mechanics

Volumn 48, Issue 2, 2008, Pages 163-179

  Orteu, Jean Jose ^a   Rotrou, Y ^a   Sentenac, T ^a   Robert, L ^a  

^a ECOLE DES MINES D ALBI CARMAUX   (France)

Author keywords

3 Dmetrology; Digital image correlation (DIC); Experimental mechanics; Full field measurements; Geometric camera calibration; Radiometric camera calibration; Shape measurements; Stereo correlation; Stereovision; Strain measurements; Temperature measurements

Indexed keywords

DIGITAL IMAGE CORRELATION; GEOMETRIC CALIBRATION; RADIOMETRIC CALIBRATION;

CALIBRATION; CCD CAMERAS; INNOVATION; OPTICAL CORRELATION; RADIOMETRY; STEREO VISION; STRAIN MEASUREMENT; TEMPERATURE MEASUREMENT;

IMAGE SENSORS;

CALIBRATION; CCD CAMERAS; IMAGE SENSORS; INNOVATION; OPTICAL CORRELATION; RADIOMETRY; STEREO VISION; STRAIN MEASUREMENT; TEMPERATURE MEASUREMENT;

EID: 41249094462     PISSN: 00144851     EISSN: 17412765     Source Type: Journal    
DOI: 10.1007/s11340-007-9071-7     Document Type: Article

References (47)

1. Velay V, Bernhart G, Delagnes D, Penazzi L (2005) A continuum damage model applied to high-temperature fatigue lifetime prediction of a martensitic tool steel. Fatigue Fract Eng Mater Struct 28:1009-1023.
2. Velay V, Bernhart G, Penazzi L (2006) Cyclic behavior modeling of a tempered martensitic hot work tool steel. Int J Plast 22:459-496.
3. Nazaret F, Cutard T, Bernhart G (2004) Thermomechanical behaviour of a fibre-reinforced refractory concrete: Tests and analysis. In: Di Prisco M, Felicetti R, Plizzari GA (eds) Proceedings of the Sixth RILEM Symposium on Fibre-Reinforced Concretes, Varenna, Italy, pp 689-698.
4. Marzagui H, Cutard T, Yeugo-Fogaing E, Huger M, Gault C, Prompt N, Deteuf C (2004) Microstructural changes and high temperature mechanical behavior of an andalusite based low cement refractory castable. In: Rigaud M, Allaire C (eds) Proceedings of Advances in Refractories for the Metallurgical Industries IV (COM'2004), Hamilton, Canada, pp 331-345.
5. Bruck HA, Schreier HW, Sutton MA, Chao YJ, Dengand X, Davoud M (1998) Distortion in GMAW of thin plates: Temperature and 3-D deformation measurements using high-speed thermal imaging and stereoscopic video imaging. Proceedings of 5th International Conference on Trends in Welding Research, Pine Mountain, GA, USA, pp 967-971.
6. Dusserre G, Schmidt F, Dour G, Bernhart G (2005) Thermo-mechanical stresses in cast steel dies during glass pressing process. J Mater Proces Technol 162-163:484-491.
7. Baleix S, Le Maoult Y, Frenois S, Marcel Y, Lours P, Bernhart G (1999) Simulation of service life cycle induced thermomechanical stresses in a superplastic forming tool. Proceedings of Third International Congress on Thermal Stresses, Krakow, Poland, pp 317-320.
8. Nazaret F, Cutard T, Bernhart G (2004) Mechanical behavior of ceramic materials for SPF toolings. Proceedings of European Conference on Superplastic Forming (EuroSPF04), Albi, France.
9. Claudinon S, Lamesle P, Orteu J-J, Fortunier R (2002) Continuous in-situ measurement of quenching distortions using computer vision. J Mater Process Technol 122:69-81.
10. Cloud G (1998) Optical methods of engineering analysis. Cambridge University Press, New York, USA, ISBN 0-521-45087-X.
11. Rastogi PK (1999) Photomechanics. Springer-Verlag, Berlin, Germany, ISBN 3-540-65990-0.
12. Grédiac M (2004) The use of full-field measurement methods in composite material characterization: Interest and limitations. Composites Part A 35:751-761.
13. Surrel Y (2004) Full-field optical methods for mechanical engineering: essential concepts to find one's way. Invited keynote at the 2nd International Conference on Composites Testing and Model Identification, Bristol, UK.
14. Kostkowski HJ, Lee RD (1962) Theory and methods of optical pyrometry. National Bureau of Standards, Reinhold Publishing Corporation.
15. Holst G (1998) Testing and evaluation of infrared imaging systems. JCD Publishing, 2nd edn.
16. Colantonio S, Pieri G, Salvetti O, Benvenuti M, Barone S, Carassale L (2006) A method to integrate thermographic data and 3D shapes for diabetic foot disease. Proceedings of 8th International Conference on Quantitative Infrared Thermography (QIRT), Padova, Italy.
17. Satzger W, Zenzinger G, Carl V (2006) Quantitative 3D-thermography. Proceedings of 8th International Conference on Quantitative Infrared Thermography (QIRT), Padova, Italy.
18. Wattrisse B, Muracciole J-M, Moreau S, El Kaïm Y, Chrysochoos A (2006) Thermo-kinematical analysis of rubber-like coupling effects in necked polyamide samples. Proceedings of Photomechanics'2006 conference, Clermont-Ferrand, France.
19. Sentenac T, Le Maoult Y, Rolland G, Devy M (2003) Temperature correction of radiometric and geometric models for an uncooled CCD camera in the near infrared. IEEE Trans Instrum Meas 52(1):46-60.
20. Rotrou Y, Sentenac T, Le Maoult Y, Magnan P, Farré J (2005) Demonstration of near infrared thermography with silicon image sensors cameras. Proceedings of ThermoSense XXVII, Orlando, Florida, USA.
21. Rotrou Y, Sentenac T, Le Maoult Y, Magnan P, Farré J (2006) Near infrared thermography with silicon FPA - comparison to MWIR and LWIR thermography. QIRT J 3(1):93-115.
22. Rotrou Y (2006) Thermographie courtes longueurs d'onde avec des caméras silicium: Contribution à la modélisation radiométrique. PhD thesis (in French), SUPAERO - École nationale supérieure de l'aéronautique et de l'espace (France).
23. Mooney JM, Shepherd FD (1996) Characterizing IR FPA nonuniformity and IR camera spatial noise. Infrared Phys Technol 37:595-606.
24. Schulz M, Caldwell L (1995) Nonuniformity correction and correctability of infrared focal plane arrays. Infrared Phys Technol 36:763-777.
25. Shi Y, Zhang T, Cao Z, Hui L (2005) A feasible approach for nonuniformity correction in IRFPA with nonlinear response. Infrared Phys Technol 46:329-337.
26. Ferrero A, Campos-Acosta J, Pons A (2006) Non uniformity correction procedure for matrix detectors based on the prior compensation of its nonlinear behavior. Appl Opt 45(11):2422-2427.
27. Holst G (1998) CCD arrays cameras and displays. International Society for Optical Engineering, 2nd edn.
28. Powell K, Deeph C, Fish D, Thompson C (1999) Restoration and frequency analysis of smeared CCD images. Appl Opt 38(8):1343-1347.
29. Ruyten W (1999) Smear correction for frame transfer charge-coupled-device cameras. Opt Lett 24(13):878-880.
30. Legrand A-C (2002) Thermographie multispectrale haute et basse température - Application au contrôle non destructif. PhD thesis (in French), Université de Bourgogne - Laboratoire Le2i.
31. Saunders P (1997) General interpolation equations for the calibration of radiation thermometers. Metrologia 34:201-210.
32. Meriaudeau F, Renier E, Truchetet F (1996) Temperature imaging and image processing in the steel industry. Opt Eng 35(12):3470-3481.
33. Meriaudeau F (2007) Real time multispectral high temperature measurement: Application to control in industry. Image Vis Comput 25:1124-1133.
34. Faugeras OD (1993) Three-dimensional computer vision: A geometric viewpoint. The MIT Press.
35. Garcia D, Orteu J-J, Devy M (2000) Accurate calibration of a stereovision sensor: Comparison of different approaches. Vision, Modeling, and Visualization 2000, Saarbrücken, Germany.
36. Garcia D (2001) Mesure de formes et de champs de déplacements tridimensionnels par stéréo-corrélation d'images. PhD thesis (in French), Institut National Polytechnique de Toulouse, France.
37. Orteu JJ, Cutard T, Garcia D, Cailleux E, Robert L (2007) Application of stereovision to the mechanical characterisation of ceramic refractories reinforced with metallic fibres. Strain 43(2):96-108.
38. Kahn-Jetter ZL, Chu TC (1990) Three-dimensional displacement measurements using digital image correlation and photogrammic analysis. Exp Mech 30(1):10-16.
39. Luo PF, Chao YJ, Sutton MA, Peters WH (1993) Accurate measurement of three-dimensional deformable and rigid bodies using computer vision. Exp Mech 33(2):123-132.
40. Sutton MA, McNeill SR, Helm JD, Chao YJ (2000) Advances in two-dimensional and three-dimensional computer vision. In: Rastogi PK (ed) Photomechanics, Topics Applied Physics 77:323-372.
41. Garcia D, Orteu J-J (2001) 3D deformation measurement using stereo-correlation applied to experimental mechanics. Proceedings of 10th FIG International Symposium on Deformation Measurements, Orange, California, USA.
42. Garcia D, Orteu JJ, Penazzi L (2002) A combined temporal tracking and stereo-correlation technique for accurate measurement of 3d displacements: Application to sheet metal forming. J Mater Process Technol 125-126:736-742.
43. Orteu JJ, Garcia D, Robert L, Bugarin F (2006) A speckle-texture image generator. Proceedings of the Speckle'06 International Conference, Nîmes, France.
44. Hernandez D (2005) A concept to determine the true temperature of opaque material using a tricolor pyroreflectometer. Rev Sci Instrum 76(024904):1-7.
45. Ranc N, Pina V, Sutter G, Philippon S (2004) Temperature Measurement by visible pyrometry: Orthogonal cutting application. J Heat Transfer 126:931-936.
46. Siegel R, Howell JR (1992) Thermal radiation heat transfer. Taylor and Francis.
47. Lyons JS, Liu J, Sutton MA (1996) High-temperature deformation measurements using digital-image correlation. Exp Mech 36(1):64-70.