Theories and industrial applications of optical interferometric NDT techniques: A review

Insight: Non-Destructive Testing and Condition Monitoring

Volumn 51, Issue 5, 2009, Pages 240-251

  Shang, Haixia ^a   Gao, Jianxin ^a  

^a TWI LTD   (United Kingdom)

Author keywords

Digital speckle correlation method (DSCM); Electronic speckle pattern interferometry (ESPI); Holography; Moir ; NDT; Optical interferometry; Shearography; Speckle

Indexed keywords

DIGITAL SPECKLE CORRELATION METHOD (DSCM); ELECTRONIC SPECKLE PATTERN INTERFEROMETRY (ESPI); NDT; OPTICAL INTERFEROMETRY; SHEAROGRAPHY;

DEFORMATION; ELASTICITY; HOLOGRAPHIC INTERFEROMETRY; INDUSTRIAL APPLICATIONS; INTERFEROMETERS; NONDESTRUCTIVE EXAMINATION; OPTICAL CORRELATION; OPTICAL SENSORS; SPECKLE; STRAIN; STRAIN MEASUREMENT; STRUCTURAL DESIGN; SURFACE TESTING; THREE DIMENSIONAL;

SURFACE DEFECTS;

EID: 67650585864     PISSN: 13542575     EISSN: None     Source Type: Journal    
DOI: 10.1784/insi.2009.51.5.240     Document Type: Review

References (158)

1. L Rayleigh, 'On the manufacture and theory of diffraction-gratings', Philosophical Magazine, Vol 47, No 310, pp 81-93 and pp 193-205, 1874.
2. D Post, B Han and P Ifju, 'High sensitivity moiré: experimental analysis for mechanics and materials', Springer-Verlag, New York, pp 1-10, 1990.
3. K Kishimoto, M Egashira and N Shinya, 'Micro-creep deformation measurement by a moiré method using electron beam lithography and electron beam scan', Optical Engineering, Vol 32, pp 522-526, 1993.
4. F L Dai and Y M Xing, 'Nano-moiré method', Acta Mechanica Sinica, Vol 13, No 3, pp 283-288, 1999.
5. H Takasaki, 'Moiré topography', Applied Optics, Vol 9, No 6, pp 1467-1472, 1970.
6. D Gabor, 'A new microscopic principle', Nature, Vol 161, No 3, pp 777-8, 1948.
7. E N Leith and J Upatnieks, 'Reconstructed wavefronts and communication theory', J Opt Soc Amer, Vol 53, pp 11-23, 1962.
8. R L Powell and K A Stetson, 'Interferometric vibration analysis by wavefront reconstruction', J Opt Soc Am, Vol 55, No 12, pp 1593-1598, 1965.
9. J N Butters, R C Jones, and C Wykes, 'Electronic speckle pattern interferometry in speckle metrology', Springer-Verlag, New York, pp 111-157, 1975.
10. R K Erf, 'Speckle metrology', Academic Press, New York, pp 183-223, 1978.
11. O Lökberg, 'Electronic speckle pattern interferometry', Physics in Technology, Vol 11, pp 16-22, 1985.
12. I Yamaguchi, 'A laser-speckle strain gauge', Scientific Instruments, Vol 14, No 5, pp 1270-1273, 1981.
13. W H Peter and W F Ranson, 'Digital imaging technique in experimental stress analysis', Opt Eng, Vol 21, No 3, pp 427-431, 1982.
14. T C Chu, W F Ranson, M A Sutton and W H Petters, 'Applications of digital-image-correlation techniques to experimental mechanics', Exp Mech, Vol 25, No 3, pp 323-244, 1985.
15. H A Bruck, S R McNeill, M A Sutton and W H Petters, 'Digital image correlation using Newto-Raphson methods of partial differential correlation', Exp Mech, Vol 29, No 3, pp 261-267, 1989.
16. M Sjodahl, 'Some recent advances in electronic speckle photography', Opt Eng, Vol 29, pp 125-144, 1998.
17. Y Y Hung, 'A speckle-shearing interferometer', Opt Commun, Vol 11, pp 132-135, 1974.
18. Y Y Hung, 'Shearography: a new optical method for strain measurement and non-destructive testing', Opt Eng, Vol 21, No 3, pp 391-395, 1982.
19. W Steinchen and L Yang, 'Digital shearography - theory and application of digital speckle pattern shearing interferometry', SPIE Press, Bellingham, Washington, pp 30-35, 2003.
20. K Creath, 'Phase-shifting speckle interferometry', Appl Opt, Vol 24, pp 3053-3058, 1985.
21. J N Butter, R C Jones and C Wykes, 'Electronic speckle pattern interferometry', Speckle Metrology, Academic Press, New York, pp 46-59, 1978.
22. P Meinlschmidt, K D Hinsch and R S Sirohi, 'Selected papers on electronic speckle pattern interferometry: principles and practice', Optical Engineering Press, SPIE, Washington, Vol MS132, 1996.
23. P K Rastogi, 'Techniques of displacement and deformation measurements in speckle metrology', Speckle Metrology, Marcel Dekker Press, New York, Chap 2, pp 41-93, 1993.
24. J Schwider, O Falkenstörfer, H Schreiber, A Zöller and N Streibl, 'New compensating four-phase algorithm for phase-shift interferometry', Opt Eng, Vol 32, pp 1883-1885, 1993.
25. Y Y Hung and J Q Wang, 'Dual-beam phase shift shearography for measurement of in-plane strains', J Opt Lasers in Eng, Vol 24, Issue 5-6, pp 403-413, 1996.
26. J Løkberg and J T Malmo, 'Detection of defects in composite materials by TV holography', NDT International, Vol 21, No 4, pp 223-228, 1988.
27. J Gryzagoridis, 'Holographic non-destructive testing of composites', Opt Laser Techno, Vol 21, No 2, pp 113-116, 1989.
28. X Yan and T Ohsawa, 'Measurement of the internal local stress distribution of composite materials by means of laser imaging methods', Composites, Vol 25, No 6, pp 443-450, 1994.
29. T X Mao, J H Han, C X Li and R D Zou, 'In-plane displacement measurement of composite material by objective speckle', Acta Mechanica Sinica, Vol 3, No 3, pp 291-295, 2006.
30. S Qin, H M Shang and C L Giam, 'Holographic assessment of edge delamination on foam-adhesive bonded joints', Composites Part B: Engineering, Vol 28, No 3, pp 177-183, 1997.
31. D I Antoniomaria, A Paoletti and D Paoletti, 'Holographic tests on ceramic coatings on metal surfaces', Compos Sci Tech, Vol 57, No 3, pp 365-369, 1997.
32. J W Newman, 'Holographic and shearographic NDT applications in aerospace manufacturing', Materials Evaluation, Vol 63, No 7, pp 746-750, 2005,
33. R Ambu, F Aymerich, F Ginesu and P Priolo, 'Assessment of NDT interferometric techniques for impact damage detection in composite laminates', Compos Sci Tech, Vol 66, No 2, pp 199-205, 2006.
34. D E Bowles, D Post, C T Herakovich and D R Tenney, 'Moiré interferometry for thermal expansion of composites', Exp Mech, Vol 21, No 12, pp 441-447, 1981.
35. D Post, R Czarnek, D Joh, J Jo and Y Guo, 'Experimental study of a metal-matrix composite', Exp Mech, Vol 27, No 2, pp 190-194, 1987.
36. F L Dai and D Post, 'Residual strain analysis of composite materials by moiré interferometry method', 7th Inter Conf, China, pp 60-71, 1989.
37. P G Ifju, 'Shear testing of textile composite materials', J Compos Tech Research, Vol 17, No 3, pp 199-204, 1995.
38. P G Ifju, J E Masters and W C Jackson, 'Using moiré interferometry to aid in standard test method development for textile composite materials', J Compos Sci Tech, Vol 53, pp 155-163, 1995.
39. P G Ifju, B C Kilday, X K Niu, and S C Liu, 'Novel method to measure residual stresses in laminated composites', J Compos Mater, Vol 33, No 16, pp 1511-1524, 1999.
40. P G Ifju, X Niu and B C Kilday, 'Residual strain measurement in composites using the cure-referencing method, Exp Mech, Vol 40, No 1, pp 22-30, 2000.
41. A McDonach, J Mckelvie and P MacKenzie, 'Improved moiré interferometry and applications in fracture mechanics, residual stresses and damaged composites', Exp Tech, Vol 7, No 6, pp 20-24, 1983.
42. H E Gascoigne, 'Residual surface stresses in laminated cross-ply fiber-epoxy composite materials', Exp Mech, Vol 3, pp 27-34, 1994.
43. T C Easley, S P Shah and K T Faber, 'Moire interferometry analysis of fiber debonding', J Eng Mech, Vol 127, No 6, pp 625-629, 2001.
44. K Shankar, H M Xie, R Y Wei, A Asundi and C G Boay, 'A study on residual stresses in polymer composites using moiré interferometry', Advanced Composite Materials, Vol 13, Issue 3-4, pp 237-253 (17), 2004.
45. M Heredia-Ortiz and E A Patterson, 'On the industrial applications of moiré and fringe projection techniques', Strain, Vol 35, No 3, pp 95-100, 2003.
46. W C Wang, C H Day, C H Hwang and T B Chiou, 'Non-destructive evaluation of composite materials by ESPI', Research in Non-Destructive Evaluation, Vol 10, No 1, pp 1-15, 1998.
47. P Fomitchov, L S Wang and S Krishnaswamy, 'Advanced image-processing techniques for automatic non-destructive evaluation of adhesively-bonded structures using speckle interferometry', Research in Non-Destructive Evaluation, Vol 16, No 4, pp 215-227, 1997.
48. M O Richardson, Z Y Zhang, M Wisheart, J R Tyrer and J Petzing, 'ESPI non-destructive testing of GRP composite materials containing impact damage', Compos Part A, Appl Sci Manufact, Vol 29, No 7, pp 721-729, 1998.
49. F Jin and F P Chiang, 'ESPI and digital speckle correlation applied to inspection of crevice corrosion on aging aircraft', Research in Non-Destructive Evaluation, Vol 10, No 3, pp 63-73, 1998.
50. M Safai and L Deobald, 'Non-destructive evaluation of aging aircraft, airports, and aerospace hardware', Proceeding of SPIE, Vol 2945, pp 339-344, 1996.
51. Y Y Hung, 'Shearography: a novel and practical approach for non-destructive inspection', J Non-Destructive Evaluation, Vol 8, No 2, pp 55-67, 1989.
52. Y Y Huang, 'Shearography for non-destructive evaluation of composite structures', Opt Lasers in Eng, Vol 24, pp 161-182, 1996.
53. Y Y Hung and H P Ho, 'Shearography: an optical measurement technique and applications', Mater Sci Eng, Vol 49, pp 61-87, 2005.
54. F S Chau, S L Toh, C J Tay and H M Shang, 'Some examples of non-destructive flaw detection by shearography', J Non-Destructive Evaluation, Vol 8, No 4, pp 225-234, 1989.
55. V Sainov, J Harizanova, and S Ossikovska, 'Fatigue detection of fibres reinforced composite materials by fringes projection and speckle shear interferometry', Fringe 2005, Springer Berlin Heidelberg, pp 567-570, 2006.
56. R Krupka, T Waltz and A Ettemeyer, 'Industrial applications of shearography for inspections of aircraft components', Optical Measurement Systems for Industrial Inspection III, Proceedings of the SPIE, Vol 5144, pp 637-642, 2003.
57. F Santos, M Vaz, and J Monteiro, 'A new set-up for pulsed digital shearography applied to defect detection in composite structures', Opt Laser Eng, Vol 42, pp 131-140, 2004.
58. M Kalms and J Jueptner, 'A mobile shearography system for non-destructive testing of industrial and artwork components', J Key Eng Mater, Issue 295-296, pp 165-170, 2005.
59. A K Maji, 'Electronic shearography for detecting disbonds in lattice/ skin structures', Research in Non-Destructive Evaluation, Vol 9, No 1, pp 1-11, 1997.
60. P Fomitchov, L S Wang and S Krishnaswamy, 'Advanced image-processing techniques for automatic non-destructive evaluation of adhesively-bonded structures using speckle interferometry', J Non-Destructive Evaluation, Vol 16, No 4, pp 215-217, 1997.
61. A A Antonov, 'Inspecting the level of residual stresses in welded joints by laser interferometry', Weld Prod, Vol 30, No 9, pp 29-31, 1983.
62. A A Antonov and N I Kamenskaya, 'Laser interferometry used for investigating the residual stresses in weld joints in low alloy steels', Autom Weld, Vol 37, No 9, pp 10-12, 1984.
63. A A Antonov, V K Morozov, and G N Chernyshev, 'Stress measurement by the method of disturbed-surface holography', Mech Solids, Vol 23, No 3, pp 179-184, 1988.
64. L M Lobanov, V A Pivtorak, V V Savitsky and G I Tkachuk, 'A procedure for investigating residual welding stresses using holographic interferometry', Autom Weld, Vol 36, No 3, pp 5-9, 1983.
65. G Nicoletto, 'Moiré interferometry determination of residual stresses in the presence of gradients', Exp Mech, Vol 31, No 3, pp 252-256, 1991.
66. S K Khanna, C He, N Hari and N Agrawal, 'Residual stress measurement in spot welds and the effect of fatigue loading on redistribution of stresses using high sensitivity moiré interferometry', J Eng Material Tech, Vol 123, No 1, pp 132-138, 2001.
67. Y Wang, 'New experimental approach for studying residual stresses in rails', Wear, Vol 191, Issue 1-2, pp 90-94, 1996.
68. B S Wang, F P Chiang, and S Y Wu, 'Whole-field residual stress measurement in rail using moiré interferometry, Twyman/Green interferometry via thermal annealing', Exp Mech, Vol 39, No 1, pp 71-76, 1999.
69. L Johnson, 'Moiré techniques for measuring strains during welding', Experimental Mechanics, Vol 14, No 4, pp 145-151, 1974.
70. J B Park, 'Theoretical and experimental analysis of residual stress formation after implant resistance welding of polycarbonate', PhD thesis, Ohio State Univ, Columbus, 1992.
71. A McDonach, J Mckelvie and P MacKenzie, 'Improved moiré interferometry and applications in fracture mechanics, Residual Stresses And Damaged Composites', Exp Tech, Vol 77, No 6, pp 20-24, 1983.
72. G Nicoletto, 'Moiré interferometry determination of residual stresses in the presence of gradients', Exp Mech, Vol 31, No 3, pp 252-256, 1991.
73. Z Wu, J Lu and B Han, 'Study of residual stress distribution by a combined method of moiré interferometry and incremental hole-drilling. Part I. Theory', J Appl Mech, Vol 65, No 9, pp 837-843, 1998.
74. Z Wu, J Lu and P Joulaud, 'Study of residual stress distribution by a combined method of moiré interferometry, incremental hole-drilling. Part II. Implementation', J Appl Mech, Vol 65, No 9, pp 844-850, 1998.
75. M Ya, H Miao, X Zhang and J Lu, 'Determination of residual stress by use of phase shifting moiré interferometry and hole-drilling method', Opt Lasers Eng, Vol 44, No 1, pp 68-79, 2006.
76. A A Antonov, 'Inspecting the level of residual stresses in welded joints by laser interferometry', Weld Prod, Vol 30, pp 29-31, 1983.
77. J D Bass, D Schmitt and T J Ahrens, 'Holographic in situ stress measurements', Geophys J R Astr Soc, Vol 85, pp 13-41, 1986.
78. D V Nelson and J T McCrickerd, 'Residual stress determination through combined use of holographic interferometry and blind hole drilling', Exp Mech, Vol 26, pp 371-378, 1986.
79. V S Pisarev, V V Balalov, V S Aistov, M M Bondarenko and M G Yustus, 'Reflection hologram interferometry combined with hole drilling technique as an effective tool for residual stresses fields investigation in thin-walled structures', Opt Lasers Eng, Vol 36, pp 551-97, 2001.
80. V V Balalov, V S Pisarev and V G Moshensky, 'Combined implementing the hole-drilling method and reflection hologram interferometry for residual stresses determination in cylindrical shells and tubes', Opt Lasers Eng, Vol 45, No 5, pp 661-676, 2007.
81. M Steinzig and E Ponslet, 'Residual stress measurement using the hole drilling method and laser speckle interferometry: Part I', Exp Tech, Vol 27, No 3, pp 43-46, 2003.
82. E Ponslet and M Steinzig, 'Residual stress measurement using the hole drilling method and laser speckle interferometry: Part II', Exp Tech, Vol 27, No 4, pp 17-21, 2003.
83. M Steinzig and T Takahashi, 'Residual stress measurement using the hole drilling method and laser speckle interferometry: Part IV', Exp Tech, Vol 27, No 6, pp 59-63, 2003.
84. G Focht and K Schiffner, 'Determination of residual stresses by an optical correlative hole-drilling method', Exp Mech, Vol 43, No 1, pp 97-104, 2003.
85. M C Ginnis, and M J Pessiki, 'Three-dimensional digital image correlation to the core drilling method', Exp Tech, Vol 45, No 4, pp 359-367, 2005.
86. F F Diaz, G H Kaufman and G E Galizzi, 'Determination of residual stress using hole drilling and digital speckle interferometry with automated data analysis', Opt Lasers Eng, Vol 33, No 1, pp 39-48, 2000.
87. D V Nelson, A Makino and T Schmidt, 'Residual stress determination using hole drilling and 3D image correlation', Exp Mech, Vol 46, No 1, pp 31-38, 2006.
88. B Han and Y Guo, 'Thermal deformation analysis of various electronic packaging products by moiré and micro moiré interferometry', J Elect Pack, Vol 117, pp 185-191, 1995.
89. B Han and Y F Guo, 'Determination of an effective coefficient of thermal expansion of electronic packaging components: a whole-field approach', IEEE Trans Comp, Pack Manu Tech, Part A, Vol 19, No 2, pp 240-247, 1996.
90. Y Y Wang and P Hassell, 'Measurement of thermally induced warpage of BGA packages/substrates using phase stepping shadow moiré', Proc IEEE/ CPMT Elect Pack Tech Conf, pp 456-461, 1997.
91. M R Stiteler and I C Ume, 'System for real-time measurement of thermally induced PWB/PWA warpage', J Elect Pack, Vol 119, pp 283-289, 1997.
92. H M Ho, K E Oh, E H Wong and T B Lim, 'Application of moiré interferometry in electronic packaging', Proc IEEE/CPMT Elect Pack Tech Conf, pp 277-282, 1997.
93. B Han, 'Deformation mechanism of two-phase solder column interconnections under highly accelerated thermal cycling condition: an experimental study', J Elect Pack, Vol 119, pp189-196, 1997.
94. X Dai and P S Ho, 'Thermo-mechanical deformation of underfilled flip-chip packaging', IEEE/CPMT Int Elect Manu Tech Sym, Vol 13-15, pp 326-333, 1997.
95. Y Guo and S Liu, 'Development in optical methods for reliability analysis in electronic packaging applications', J Elect Pack, Vol 120, pp 186-193, 1998.
96. M R Miller, T Mohammed, X Dai, N Jing and P S Ho, 'Analysis of flip-chip packaging using high resolution moiré interferometry', Proc Elect Comp Tech Conf, IEEE, pp 979-986, 1999.
97. G J Petriccione and I C Ume, 'Warpage studies of HDI test vehicles during various thermal profiling', IEEE Trans Adv Pack, Vol 22, No 4, pp 624-637, 1999.
98. B Han, Y Guo and H C Choi, 'Out-of-plane displacement measurement of the printed circuit board by shadow moiré with variable sensitivity', Proc ASME Int Elect Pack Conf, Binghamton, Vol 4, No 1, pp 179-185, 1993.
99. H M Xie, K Satoshi, S Norio, F L Dai, D Zou and S Liu, 'Thermal deformation measurement of the solder joints in electronic packages using electron moiré method', J Strain, Vol 35, No 4, pp 127-130, 1999.
100. T Y Tee, K Sivakumar and L Herard, 'Comprehensive analysis of BGA block warpage induced after post mold cure', Proc Int Conf Elect Pack (ICEP), Tokyo, Japan, pp 460-465, 2001.
101. X Q Shi and Z P Wang, 'In-situ moiré interferometry technique and its applications to microelectronic packages', 52nd Elect Compon Tech Conf, San Diego, USA, pp 28-31, May 2002.
102. C Y Xiong, J Zhang, M Li, J Fang and S Yi, 'Fourier and wavelet transform analysis of moiré fringe patterns in electronic packaging', Microelectronics Int, Vol 21, No 2, pp 45-51, 2004.
103. I Tsai, E Wu, S F Yen and T H Chuang, 'Mechanical properties of intermetallic compounds on lead-free solder by moiré techniques', J Electronic Materials, Vol 35, No 5, pp 1059-1066, 2006.
104. G L Cloud, 'Optical methods of engineering analysis', Cambridge University Press, New York, pp 453-491, 1995.
105. S Dilhaire, S Jorez, A Cornet, E Schaub and W Claeys, 'Imaging setup for temperature, topography, and surface displacement measurements of microelectronic devices', Microelectron Reliability, Vol 39, pp 981-985, 1999.
106. S Grauby, S Jorez, L D Lopez, J M Rampnoux and W Claeys, 'Surface displacement imaging by interferometry with a light emitting diode', Applied Optics, Vol 41, No 24, pp 4996-5001, 2002.
107. K Genovese, L Lamberti and C Pappalettere, 'A comprehensive ESPI based system for combined measurement of shape and deformation of electronic components', Opt Laser Eng, Vol 42, No 5, pp 543-562, 2004.
108. B W Lee, W Jang, D W Kim and J H Jeong, 'Application of electronic speckle-pattern interferometry to measure in-plane thermal displacement in flip-chip packages', Mater Sci Eng A, Vol 380, pp 231-236, 2004.
109. S L Chen, C Z Tsai, N Kao and E B Wu, 'Mechanical behaviour of flip chip packages under thermal loading', Elect Comp Tech Conf, Proceedings', Vol 2, pp 1677-1682, June 2005.
110. H Lu, 'Applications of digital speckle correlation to microscopic strain measurement and materials' property characterization', J Elect Pack, Trans ASME, Vol 120, No 3, pp 275-279, 1998.
111. R D Pendse and P Zhou, 'Methodology for predicting solder joint reliability in semiconductor packages', Microelectronics Reliability, Vol 42, No 2, pp 301-305, 2002.
112. P Zhou and K Goodson, 'Thermomechanical diagnostics of BGA packages using digital image/speckle correlation', Thermomechanical Phenomena in Electronic Systems, Proceedings of the Inter Society Conf on Thermal Phenomena, Vol 2, pp 240-245, May 2000.
113. P Zhou and K Goodson, 'Subpixel displacement and deformation gradient measurement using digital image/speckle correlation (DISC)', Opt Eng, Vol 40, No 8, pp 1613-1620, 2001.
114. V Srinivasan, S Radhakrishnan, X Zhang, G Subbarayan, T Baughn and L Nguyen, 'High resolution characterization of materials used in packages through digital image correlation', Proceeding of IPACK 2005, San Francisco, California, USA, pp 1-8, July, 2005.
115. M Lee and M Pecht, 'Application of 3D measurement system with CCD camera in microelectronics', Advanced Packaging, pp 33-34, Nov 2003.
116. Y Y Huang, 'Technique for rapid inspection of hermetic seals of microelectronic packages using shearography', Opt Eng, Vol 37, No 5, pp 1406-1409, 1998.
117. D Cooke, 'Moiré fringe technique for vibration measurement', J Sci Instrum, Vol 39, pp 373-376, 1962.
118. P S Theocaris and S A Paipetis, 'Vibration measurements by the moiré method', J Phys E: Sci. Instrum, Vol 5, pp 217-219, 1972.
119. J D Hovanesian and Y Y Hung, 'Moiré contour-sum, contour-difference and vibration analysis of arbitrary objects', Appl Opt, Vol10, pp 2734-8, 1972.
120. R Ritter and H J Meyer, 'Vibration analysis of plates by a real time-averaged projection moiré method', Appl Opt, Vol 19, pp 1630-3, 1980.
121. O Kafri, Y B Band, T Chin, D F Heller and J C Walling, 'Real time moiré vibration analysis of diffusive objects', Appl Opt, Vol 24, pp 240-242, 1985.
122. R Rodriguez-Vera, A Avila, J A Rayas and F Mendoza-Santoyo, 'Determination of mechanical vibration properties of one-dimensional structures using a fringe projection method', Laser Electro-Optics, Pacific Rim Conf, pp 1509-1510, Aug 2005.
123. M Ragulskis1, R Šatkauskas, K Ragulskis and R Maskeliunas, 'Shadow moiré analysis of surface oscillations of the fluid', Ultragarsas, Vol 1, No 54, pp 22-25, 2005.
124. W F Fagan, P Waddell and W McCracken, 'The study of vibration patterns using real-time hologram interferometry', Opt Laser Tech, Vol 4, No 4, pp 167-172, 1972.
125. M D Olson and C R Hazell, 'Vibration studies on some integral rib-stiffened plates', J Sound Vibration, Vol 50, pp 43-61, 1977.
126. P J Bryanston-Cross and J W Gardner, 'Application of holographic interferometry to the vibrational analysis of the harpsichord', Opt Laser Tech, Vol 20, No 4, pp 199-204, 1988.
127. H Steinbichler and G Gehring, 'TV-holography and holographic interferometry: industrial applications', Opt Laser Eng, Vol 24, No 2-3, pp 111-127, 1996.
128. J D Fieldhouse and T P Newcomb, 'Double pulsed holography used to investigate noisy brakes', Opt Laser Eng, Vol 25, No 6, pp 455-494, 1996.
129. H Steinbichler, J Engelsberger, W Sixt, J Sun and T Franz, 'Application of computer-aided evaluation for holography and similar techniques', Opt Laser Eng, Vol 13, No 1, pp 39-50, 1990.
130. G B Chai, S S Chin, T M Lim and K H Hoon, 'Vibration analysis of laminated composite plates: TV-holography and finite element method', Composite Structure, Vol 23, No 4, pp 273-283, 1993,
131. K Matsuda, B Q Ye, N Fukuchi, H Okamoto and T Hara, 'Holographic vibration measurements of rough surfaces using a LCSLM', Optics Communications, Vol 275, No 1, pp 53-56, 2007.
132. M A Beeck and W Hentschel, 'Laser metrology - a diagnostic tool in automotive development processes', Opt Laser Eng, Vol 34, pp 101-20, 2000.
133. M Reeves, N Taylor and C Edwards, 'A study of brake disc modal behaviour during squeal generation using high-speed electronic speckle pattern interferometry and near-field sound pressure measurements', Proc Inst Mech Eng, Part D: J Automobile Eng, Vol 214, pp 285-96, 2000.
134. P D Ruiz, G H Kaufmann and O Moller, 'Evaluation of impact-induced transient deformations using double-pulsed electronic speckle pattern interferometry and finite elements', J Opt Lasers Eng, Vol 32, pp 473-484, 2000.
135. C C Ma and C H Huang, 'Experimental full field investigations of resonant vibrations for piezoceramic plates by an optical interferometry method', Exp Mech, Vol 42, No 2, pp 140-146, 2002.
136. V D Auweraer, H Steinbichler, H Haberstok, C Freymann, R Storer and D Linet, 'Industrial applications of pulsed-laser ESPI vibration analysis', Proceedings of SPIE, Vol 4359, No 1, pp 490-496, 2001.
137. D I Farranta, J N Petzingb and J R Tyrer, 'Geometrically qualified ESPI vibration analysis of an engine', Opt Laser Eng, Vol 41, pp 659-671, 2004.
138. A J Moore, D P Hand and J S Barton, 'Transient deformation measurement with electronic speckle pattern interferometry and a high-speed camera', J Appl Opt, Vol 38, No 7, pp 1159-1162, 1999.
139. A Davila, G H Kaufmamn and C Perez-Lopez, 'Transient deformation analysis by a carrier method of pulsed electronic speckle-shearing pattern interferometry', J Appl Opt, Vol 37, No 19, pp 4116-4122, 1998.
140. W Steinchen, L X Yang and G Kupfer, 'Vibration analysis and non-destructive testing by digital shearography', Proc SPIE, Vol 2861, pp 41-50, 1996.
141. L X Yang, W Steinchen, G Kupfer, P Mäckel and F Vössing, 'Vibration analysis by means of digital shearography', Opt Laser Eng, Vol 30, No 2, pp 199-212, 1998.
142. A B Benjamin, S D Wu and B R Tittmann, 'Quantitative verification of laser-modulated phase-stepping digital shearography for monofrequency vibration measurement', J of the Acoustical Society of America, Vol 101, No 5, pp 3062-3067, 1997,
143. M V Mantravadi, 'Lateral Shearing Interferometry', In Optical Shop Testing, 2nd ed, New York, Wiley, Chapter IV, pp 123-172, 1992.
144. C Shakher and S Prakash, 'Monitoring/measurement of out-of-plane vibrations using shearing interferometry and interferometric grating', Opt Laser Eng, Vol 38, pp 269-277, 2002.
145. D T Read and J W Dally, 'Electron beam moiré study of fracture of a glass fibre reinforced plastic composite', Trans ASME, Vol 61, pp 402-409, 1994.
146. Y M Xing, Y Tanaka, S Kishimoto and N Shinya, 'Determining interfacial thermal residual stress in Sic/Ti-15-3 composites', Scripta Materialia, Vol 48, No 6, pp 701-706, 2003.
147. Y M Xing, S Kishimoto, Y Tanaka and N Shinya, 'A novel method for determining interfacial residual stress in fiber-reinforced composites', J Compos Mater, Vol 38, No 2, pp 137-148, 2004.
148. H X Shang, H M Xie and F L Dai, 'Application of phase shifting technique for SEM scanning moiré method in MEMS', Proceedings of SPIE, Vol 5058, pp 417-420, 2002.
149. H M Xie, H X Shang and Q K Xue, 'Defects analysis of Al/Si artificial nanocluster with moiré fringes', Opt Laser Eng, Vol 43, pp1071-1075, 2005.
150. D Cherns, 'TEM characterisation of defects, strains and local electric fields in Algan/Ingan/Gan structures', Materials Science Engineering B, Vol 91-92, pp 274-279, 2002.
151. J Müller, V Kebbel and W Jüptner, 'Digital holography as a tool for testing high-aperture micro-optics', Opt Laser Eng, Vol 43, No 7, pp 739-751, 2005.
152. V S Oksana, N Tatiana, L Smirnova, M Goldenberg and J Stumpe, 'Holographic patterning of luminescent photopolymer nanocomposites', Materials Science Engineering: C, in Press, corrected proof, available online 15 March 2007.
153. B John, J Deaton, W James, W Wagner and Robert S Rogowski, 'Electronic speckle pattern interferometry on a microscopic scale', J Non-Destructive Evaluation, Vol 13, No 1, pp 13-22, 1994.
154. Y Fu, C J Tay, C Quan and L J Chen, 'Temporal wavelet analysis for deformation measurement of small components using micro-ESPI', SPIE Proceedings, Vol 5852, No 2, pp 559-565, 2005.
155. C Karaalioglu and Y Skarlatos, 'Fourier transform method for measurement of thin film thickness by speckle interferometry', J Opt Eng, Vol 42, No 6, pp 1694-1698, 2003.
156. D L Kim, Y-H Huh and C D Kee, 'Out-of-plane micro-ESPI for measurement of mechanical properties of film materials', Key Eng Mater, Vol 321-323, pp 116-120, 2006.
157. R Wang and M Kido, 'Non-destructive measurement of fatigue damage of thermally sprayed Al2O3/Nicr using ESPI method under high temperature', Research in Non-Destructive Evaluation, Vol 21, No 4, pp 63-73, 2002.
158. S Ham, J H Lee and S D Park, 'Vibration analysis of gyro sensors by using ESPI technique', SPIE Proceedings, Vol 5852, pp 220-222, 2005.