Ceramics and ceramic matrix composites: Finite element and boundary element analyses - A bibliography (1998-2000)

Finite Elements in Analysis and Design

Volumn 38, Issue 6, 2002, Pages 567-577

  Mackerle, Jaroslav ^a  

^a LINKÖPING INSTITUTE OF TECHNOLOGY   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

BIBLIOGRAPHIES; BOUNDARY ELEMENT METHOD; CERAMIC MATRIX COMPOSITES; FINITE ELEMENT METHOD;

THERMAL SHOCK ANALYSIS;

CERAMIC MATERIALS;

EID: 0036532667     PISSN: 0168874X     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0168-874X(01)00068-3     Document Type: Short Survey

References (240)

1. Development of an advanced ceramic tool material-functionally gradient cutting ceramics
2. Flex, rigid, and ceramic CSP-lifetime behavior
3. Instrumented micro-indentation of zirconia ceramics
4. New tensile rupture test for the mechanical characterization of an adhesively-bonded structural ceramic assembly
5. Threshold conditions for dynamic fragmentation of ceramic particles
6. Study on the mechanics of the delamination of ceramic functional coatings
7. On the stability of refractory lining in lime kilns
8. Residual stress and fracture of laminated ceramic membranes
9. Interface fracture properties of a bimaterial ceramic composite
10. Finite element calculation of thermomechanical stresses in candidate ceramic components for press and blow moulds
11. Experimental examination of temperature variations in a hot runner system
12. Experimental and numerical residual stress analysis of layer coated composites
13. Behavior of ceramic-matrix composites under thermomechanical cyclic conditions
14. Oxidation-induced stresses in ceramic-metal interfaces
15. Crack bridging in functionally graded coatings
16. Wear behavior of ceramic pairs compared on different testing configurations
17. Effect of surface finish on strength degradation of glass ceramics
18. Multiple surface crack initiation and growth in glass-ceramics loaded by a sphere
19. The influence of the interphase and associated interfaces on the deflection of matrix cracks in ceramic matrix composites
20. Fracture toughness of ceramics and semi-brittle alloys using a miniaturized disk-bend test
21. Stiffness evaluation and damage detection of ceramic candle filters
22. Finite element analysis of cracks in ferroelectric ceramic materials
23. Relationship between frictional heating and microfailure state in a continuous fiber-reinforced ceramic matrix composite under cyclic loading
24. Realistic finite element model for the double-torsion loading configuration
25. Analysis and prediction of thermal shock in brittle materials
26. 2 overlay
27. Elastic moduli of a 2.5D Cf/SiC composite: Experimental and theoretical estimates
28. Computational evaluation of poling induced stress fields in a piezoelectric ceramic
29. Computational evaluation of poling induced stress in a piezoelectric ceramic
30. Characterization and performance prediction for integral capacitors in low temperature co-fired ceramic technology
31. Failure prediction for ceramic dies in the hot-forging process using FEM simulation
32. Numerical simulation of failure prediction for ceramic tools: Comparison with forging test results
33. Testing of a low cooled ceramic nozzle vane under transient conditions
34. Testing of a low cooled ceramic nozzle vane under transient conditions
35. Modelling and simulation of the extrusion of ceramic bodies
36. Modeling the production and performance of plasma-sprayed ceramic thermal barrier coatings
37. Neutron diffraction and finite element analysis of thermal residual stresses on diffusion-bonded silicon carbide-molybdenum joints
38. SiC ceramics with tailored porosity gradients for combustion chambers
39. Analysis of reactive melt infiltration in the processing of ceramics and ceramic composites
40. Modeling of ceramic microstructures: Dynamic damage initiation and evolution
41. A numerical investigation of penetration in multilayered material structure systems
42. Adaptive FEM computation of geometric and material nonlinearities with application to brittle failure
43. Ceramic design and reliability issues in assembly of RF/microwave power packages
44. Determination of the trap density in amorphous silicon by quasi-static capacitance voltage measurements
45. Numerical analysis of crack propagation in piezoelectric ceramics
46. A partitioned problem approach to microstructural modeling of a glass-ceramic
47. Partitioned-problem approach to microstructural modelling of a glass-ceramic
48. The impedance of ceramics with highly resistive grain boundaries: Validity and limits of the brick layer model
49. Finite element calculations on the impedance of electroceramics with highly resistive grain boundaries. I - Laterally inhomogeneous grain boundaries
50. Finite element analysis of ceramic multilayer capacitors: Failure probability caused by wave soldering and bending loads
51. Mechanical property evaluation of thin corroded surface layers of ceramic materials by the microindentation technique
52. Analysis of cracking and delamination processes in sprayed cermet and ceramic coatings under biaxial tension
53. Failures at attachment holes in brittle matrix laminates
54. Theory of indentation of piezoelectric materials
55. Stress concentration due to fiber-matrix fusion in ceramic matrix composites
56. Laser induced surface modification of ceramic substrates for thermal and electric lines in microsystems: Modeling compared to experiment
57. Failure of silicon nitride rolling elements with ring crack defects
58. Tensile behavior of woven ceramic matrix composites at room and elevated temperature: An experimental and numerical study
59. Optimum design of sintered silicon nitride ceramics specimen with projections for high-temperature creep test
60. A numerical simulation on strength of Si-Ti-C-O fiber bonded ceramics
61. High temperature creep under bend loading in Si-Ti-C-O ceramic fiber bonded body
62. Strength degradation of nonrandom porous ceramic structures under uniaxial compressive loading
63. Modeling of multiple pore ceramic materials fabricated via fused deposition process
64. Elastic-plastic analysis of stresses and initiation of cracks in a ceramic coating under indentation by an elastic sphere
65. Spring constants of composite ceramic/gold cantilevers for scanning probe microscopy
66. Modeling of thermal shock spalling crack in a ceramic slab
67. A fracture criterion for conducting cracks in homogeneously poled piezoelectric PZT-PIC 151 ceramics
68. The effect of metal vias on the mechanical properties of cofired ceramics: Three dimensional considerations (MCM-C)
69. Axisymmetrically laser welding of ceramics: Comparison of experimental and finite element results
70. Ceramic column grid array technology with coated solder columns
71. A microstructural approach to flaw size dependence of strength in engineering ceramics
72. A finite element model of ferroelastic polycrystals
73. Shear failure behavior of continuous fiber reinforced ceramic matrix composites
74. Stress analysis for through hole area in multilayer alumina ceramic substrate
75. Modeling and simulation of the mechanical behavior of ceramic matrix composites as shown by the example of SiC/SiC
76. Numerical modeling of the damage evolution in an aluminum alloy reinforced bidirectionally by ceramic fibers
77. Modeling and numerical simulation of the mechanical behavior of woven SiC/SiC regarding a three-dimensional unit cell
78. Material design for high strength and toughness of continuous fiber-reinforced ceramic matrix composites
79. Fracture behavior of ceramic filter using diametral ring compression test
80. Ring compression strength of ceramic filters
81. Multiaxial creep life prediction of ceramic structures using continuum damage mechanics and the finite element method
82. Application-specific CFCMC design using 2D structural simulations
83. Hertzian-crack suppression in ceramics with elastic modulus graded surfaces
84. Embedded miniature heat pipes in ceramic cofire substrates
85. On a non-linear finite element method for piezoelectric structures made of hysteretic ferroelectric ceramics
86. On a non-linear finite element method for piezoelectric structures made of hysteretic ferroelectric ceramics
87. Industry, government team to improve ceramic manufacturing
88. 3 ceramics
89. Finite element simulation of ceramic drying processes
90. Densification behavior of nanocrystalline titania powder compact under high temperature
91. Stress intensity factors and crack initiation directions for ceramic/metal joint
92. Effect of ceramic ball inclusion on densification of metal powder compact
93. Densification behavior of ceramic powder under cold compaction
94. Effects of interface and residual stress on mechanical properties of ceramic/metal system
95. Mixed-mode fracture behavior of silica particulate filled epoxide resin
96. Continuous existence of bismuth at grain boundaries of zinc oxide varistor without intergranular phase
97. Piezoelectric micromotor using a metal-ceramic composite structure
98. Angle of Hertzian cone cracks
99. Fracture of metal/ceramic interfaces
100. New stress analysis procedure for piping with refractory lining
101. Comparison between bimorphic and polymorphic bending devices
102. Micromechanics of crack bridging by elongated crystals in self-reinforced ceramic materials
103. Finite element simulation of thermal residual stresses in joining ceramics with thin metal interlayers
104. Single and double deflections of cracks at the carbon-carbon/BN coating interfaces in ceramic-matrix composites
105. Theoretical investigations on the cracking of ferroelectric ceramics
106. Probabilistic-statistical approach to matrix damage and stress-strain behavior of 2-D woven SiC/SiC ceramic matrix composites
107. Tensile stresses and their implication to cracking at pyramid indentation of pressure-sensitive hard metals and ceramics
108. Integrated approach to furnace refractory design
109. Model of strength degradation from Hertzian contact damage in tough ceramics
110. Contact-induced transverse fractures in brittle layers on soft substrates: A study on silicon nitride bilayers
111. Influence of particle volume fraction, shape, and aspect ratio on the behavior of particle-reinforced metal-matrix composites at high strain
112. Continuous fiber reinforced ceramic composites
113. Crack initiation and extension characteristics of ceramic/metal joint under cyclic loading
114. Design of compression shrink-fit ceramic-steel wear ring assembly for chemical mechanical planarization
115. Testing and finite element analysis of sintered silicon nitride specimens under four-point bending
116. Finite element modelling of ceramics and glass, a bibliography (1977-1998)
117. Conditions for matrix crack deflection at an interface in ceramic matrix composites
118. Finite element modelling of binder removal from ceramic mouldings
119. Finite element analysis of a thermally loaded interface crack in a ceramic coating
120. 3 determined by sinter-forging
121. 3 by finite element method
122. Application of simulation model to phenomenon of cracked products during sintering
123. R&D of steady state and high voltage ICRF transmission line and ceramic feedthrough for LHD
124. Steady-state tests of high-voltage ceramic feedthroughs and coaxial transmission line for ICRF heating systems of the large helical device
125. Effects of pores on mechanical properties of plasma-sprayed ceramic coating
126. Finite element method simulation of transverse bridging in fiber reinforced composites
127. Penetration/perforation of aluminum, steel and tungsten plates by ceramic rods
128. Analysis and measurement of residual stress distribution of vanadium/ceramics joints for fusion reactor applications
129. Computational analysis of mixed-mode delamination crack growth in a woven laminated ceramic-matrix composite
130. Ceramic coating edge due to thermal expansion interference
131. Finite element simulation of Vickers microindentation on alumina ceramics
132. Void-effect modeling of flip-chip encapsulation on ceramic substrate
133. Void effect modeling of flip-chip encapsulation on ceramic substrate
134. Ablation processes induced by UV lasers in metals and ceramics
135. Impact strength of continuous carbon fiber reinforced silicon nitride measured by using the split Hopkinson pressure bar
136. Reliability evaluation of structural ceramics under multiaxial stress state
137. Rheological analysis of ceramic pastes
138. Model for uniaxial compaction of ceramic powders
139. A computational investigation on metal/ceramic joints under thermal cyclic loadings
140. Nonlinear transient thermoelastic analysis of functionally graded ceramic-metal plates
141. 3-dimensional FEM simulations of resonance in the impedance characteristic of ceramic multilayer capacitors
142. Modelling the transient heat transfer in the ceramic combustion chamber walls of a low heat rejection diesel engine
143. Oxide/oxide ceramic matrix composites in gas turbine combustors
144. Bonding mechanism and stress distribution of a glass frit free thick film metallization for AIN ceramic
145. Simulation of the stochastic mechanical behavior of porous ceramics by means of the finite element method
146. Reliability of ceramic components for total hip endoprostheses
147. Improving the reliability of the ceramic-on-ceramic wear in THR
148. Visualization of the damage evolution in impacted silicon carbide ceramics
149. New metrology stage for ion projection lithography made of glass ceramics
150. Elastic properties of model porous ceramics
151. A micromechanical model for thermostructural composites
152. A theoretical study of the coupling effects in piezoelectric ceramics
153. Design and fabrication of a dual-axial gyroscope with piezoelectric ceramics
154. Thermal fatigue life evaluation for the solder joint ceramic BGA
155. Investigation of ceramic-to-metal joint properties by hybrid Moire interferometry/FEM analysis
156. Stress intensity factor coefficients for chevron-notched flexure specimens and a comparison of fracture toughness methods
157. A finite element approach for the shape prediction of ceramic compacts during sintering
158. Application of the weight function method to study the R-curve behavior of ceramics using chevron-notched specimens
159. Fabrication and pressure testing of a gas-turbine component manufactured by a preceramic-polymer-impregnation method
160. Cyclic thermal shock resistance of several advanced ceramics and ceramic composites
161. FEM modelling of firing temperature and stress zones
162. Fracture in angle-ply ceramic matrix composites
163. Electroceramic materials
164. The effects of strength probabilistics on the fracture mode of ceramic/metal multilayers
165. Thermal expansion of metal-ceramic composites: A three-dimensional analysis
166. Effect of fibre surface roughness on the mechanical behaviour of ceramic matrix composites
167. Design of room temperature tensile test specimen made of ceramic matrix composites
168. A constitutive model for sintering of ceramic powder compacts with internal structure due to granules
169. Thermomechanical behavior of high-alumina refractory castables with synthetic spinel additions
170. HNS steelmaking process using thermal plasma in a ceramic crucible
171. 2 based ceramic layers
172. Thermally optimised millimeter wave package on an LTCC ceramic board
173. 3/Au joints
174. Finite element modelling of ferroic domain switching in piezoelectric ceramics
175. Fracture strength of fiber-bounded ceramic composite subjected to static and impact bending
176. Evaluations of the shear strength of advanced ceramic composite materials
177. Reduction of residual stress generated in metal-ceramic joining
178. Ceramic surface finish: Its influence on the heat transfer in thermal shock tests
179. Test methodology for the thermal shock characterization of ceramics
180. Material wear in blast furnace crucibles
181. A square ring on square ring (SoS) ceramic strength testing technique for VLSI packaging
182. A square ring on square ring (SoS) ceramic strength testing technique for VLSI packaging
183. Response of fiber reinforced ceramic matrix composites through computational modeling of damage
184. Oxidation protection coatings for C/SiC based on yttrium silicate
185. Influence of different materials on the thermal behavior of a CDIP-8 ceramic package
186. Residual stresses and strength of friction welded ceramic/metal joints
187. Probabilistic thermal-shock strength testing using infrared imaging
188. Finite element simulation of die pressing and sintering results in time and cost savings
189. Overall properties of ceramics subjected to compressive loading
190. Ceramic honeycomb structures
191. Ceramic ball grid array solder joint thermal fatigue life prediction model
192. Tough-to-brittle transitions in ceramic-matrix composites with increasing interfacial shear stress
193. Process capability study and thermal fatigue life prediction of ceramic BGA solder joints
194. Derivation of crack path in particle-dispersed ceramic composites by finite element method
195. Evaluation of solder joint reliability between PWB and CSP by using high TCE ceramic material
196. Evaluation of fatigue strength and damage in toughened silicon nitride by load increasing test
197. An axisymmetric model of pore-grain boundary separation
198. Second-order analysis of free vibrations of piezoelectric ceramic actuators
199. Residual stress fields at the surface of sharp pyramid indentations
200. Study on the influence of thermal stress in the firing of a ceramic body
201. Finite element analysis of micromechanical failure modes in a heterogeneous ceramic material system
202. Grinding damage prediction for ceramics via CDM model
203. Overview of fracture of piezoelectric ceramics
204. High temperature creep under bend loading in Si-Ti-C-O ceramic fiber bonded body
205. A heuristic approach to microcracking and fracture for ceramics with statistical consideration
206. Simulation of contact-induced fracture
207. Characterization and performance prediction for integral capacitors in low temperature co-fired ceramic technology
208. An efficient BEM to calculate weight functions and its application to bridging analysis in an orthotropic medium
209. Stress intensity factor coefficients for chevron-notched flexure specimens and a comparison of fracture toughness methods
210. Overview of fracture of piezoelectric ceramics
211. Analysis of stress intensity factor of chevron notched specimen and measurement of fracture toughness of ceramics
212. Study on the thermal stress at ceramics-metal joint
213. BEM analysis of bonded dissimilar materials and strength evaluation based on interfacial fracture mechanics
214. Boundary element analysis of metal/ceramic bonded joint and evaluation of the strength
215. Evaluation of fracture and strength of metal/ceramic bonded joints based on interfacial fracture mechanics