Instrumented micro-indentation of zirconia ceramics

Journal of the American Ceramic Society

Volumn 83, Issue 8, 2000, Pages 1977-1984

  Alcalá, Jorge ^a,b,c  

^a UNIVERSITY OF CASTILLA LA MANCHA   (Spain)

^b AMERICAN CERAMIC SOCIETY   (United States)

^c UNIVERSITAT POLITÈCNICA DE CATALUNYA   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

CERAMIC MATERIALS; ELASTIC MODULI; FINITE ELEMENT METHOD; MICROHARDNESS; PLASTICITY; PRESSURE EFFECTS; VICKERS HARDNESS TESTING;

MICROINDENTATION; PLASTIC HARDENING;

ZIRCONIA;

EID: 0034248139     PISSN: 00027820     EISSN: None     Source Type: None    
DOI: 10.1111/j.1151-2916.2000.tb01500.x     Document Type: Article

References (32)

1. M. Kh. Shorshorov, S. I. Bulychev, and V. P. Alekhin, "Work of Plastic and Elastic Deformation During Indenter Indentation," Sov. Phys. Dokl., 26 [8] 769-71 (1981).
2. J. B. Pethica, R. Mutchings, and W. C. Oliver, "Hardness Measurements at Penetration Depths as Small as 20 nm," Philos. Mag., A48, 593-606 (1983).
3. J. S. Field and M. V. Swain, "A Simple Predictive Model for Spherical Indentation," J. Mater. Res., 8, 297-305 (1993).
4. M. F. Doerner and W. D. Nix, "A Method for Interpreting the Data from Depth-Sensing Indentation Instruments," J. Mater. Res., 1, 601-609 (1986).
5. M. J. Mayo and W. D. Nix, "A Micro-indentation Study of Superplasticity in Pb, Sn, and Sn-38 wt% Pb," Acta Metall., 36, 2183-92 (1988).
6. W. C. Oliver and G. M. Pharr, "An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments," J. Mater. Res., 7, 1564-83 (1992).
7. G. M. Pharr and R. F. Cook, "Instrumentation of a Conventional Hardness Tester for Load-Displacement Measurement During Indentation," J. Mater. Res., 5 [4] 847-51 (1990).
8. R. F. Cook and G. M. Pharr, "Direct Observation and Analysis of Indentation Cracking in Glasses and Ceramics," J. Am. Ceram. Soc., 73 [4] 787-817 (1990).
9. R. F. Cook and G. M. Pharr, "Indentation Load-Displacement Behaviour During Conventional Hardness Testing," J. Hard Mater., 5, 179-90 (1994).
10. K. Zeng, E. Söderlung, A. E. Giannakopoulos, and D. J. Rowcliffe, "Controlled Indentation: A General Approach to Determine Mechanical Properties of Brittle Materials," Acta Mater., 44, 1127-41 (1996).
11. S. Suresh, A. E. Giannakopoulos, and J. Alcalá, "Spherical Indentation of Compositionally Graded Materials: Theory and Experiments," Acta Mater., 45 [4] 1307-21 (1997).
12. J. Alcalá, A. E. Giannakopoulos, and S. Suresh, "Continuous Measurements of Load-Penetration Curves with Spherical Micro-indenters and the Estimation of Mechanical Properties," J. Mater. Res., 13 [5] 1390-400 (1998).
13. A. E. Giannakopoulos and P.-L. Larsson, "Analysis of Pyramid Indentation of Pressure-Sensitive Hard Metals and Ceramics," Mech. Mater., 25, 1-35 (1997).
14. H. O'Neill, Hardness Measurement of Metals and Alloys, 2nd ed. Chapman and Hall, London, U.K., 1967.
15. I. N. Sneddon, "Boussinesq's Problem for a Flat-Ended Cylinder," Proc. Cambridge Philos. Soc., 42, 29-39 (1945).
16. R. B. King, "Elastic Analysis of Some Punch Problems for a Layered Medium," Int. J. Solids Struct., 23 [12] 1657-64 (1997).
17. S. Timoshenko and J. N. Goodier, Theory of Elasticity. McGraw-Hill, New York, 1951.
18. J. Alcalá and M. Anglada, "Fatigue and Static Crack Propagation in Yttria-Stabilized Tetragonal Zirconia Polycrystals: Crack Growth Micromechanisms and Precracking Effects," J. Am. Ceram. Soc., 80 [11] 2759-72 (1997).
19. M. M. Nagl, L. Llanes, R. Fernández, and M. Anglada, "The Fatigue Behavior of Mg-PSZ and ZTA Ceramics"; pp. 61-76 in Fracture Mechanics of Ceramics, Vol. 12, Fatigue, Composites and High-Temperature Behavior. Edited by R. C. Bradt, D. P. H. Hasselman, D. Munz, M. Sakai, and V. Shevchenko. Plenum Press, New York, 1996.
20. J. Alcalá and M. Anglada, "Indentation Precracking of Y-TZP: Implications to R-Curves and Strength," Mater. Sci. Eng., A245, 267-76 (1998).
21. R. M. Anderson and L. M. Braun, "Technique for the R-Curve Determination of Y-TZP Using Indentation-Produced Flaws," J. Am. Ceram. Soc., 73 [10] 3059-62 (1990).
22. A. E. Giannakopoulos, P.-L. Larsson, and R. Vestergaard, "Analysis of Vickers Indentation," Int. J. Solids Struct., 31 [19] 2679-708 (1994).
23. J. H. Westbrook and H. Conrad (Eds.), The Science of Hardness Testing and Its Research Applications. American Society for Metals, Metals Park, OH, 1973.
24. A. Bolshakov and G. M. Pharr, "Influences of Pileup on the Measurement of Mechanical Properties by Load and Depth Sensing Indentation Techniques," J. Mater. Res., 13 [4] 1049-58 (1998).
25. P.-L. Larsson, A. E. Giannakopoulos, E. Söderlund, D. J. Rowcliffe, and R. Vestergaard, "Analysis of Berkovich Indentation," Int. J. Solids Struct., 33 [2] 221-48 (1996).
26. K. L. Johnson. Contact Mechanics. Cambridge University Press, Cambridge, U.K., 1985.
27. P.-L. Larsson and A. E. Giannakopoulos, "Tensile Stresses and Their Implication to Cracking at Pyramid Indentation of Pressure-Sensitive Hard Metals and Ceramics," Mater. Sci. Eng., A254, 268-81 (1998).
28. M. Sakai, "Energy Principle of the Indentation Induced Inelastic Surface Deformation and Hardness of Brittle Materials," Acta Metall. Mater., 41, 1751-58 (1993).
29. S. Liu and I-W. Chen, "Fatigue Deformation Mechanisms of Zirconia Ceramics," J. Am. Ceram. Soc., 75 [5] 1191-204 (1992).
30. J. Lankford, R. A. Page, and L. Rabenberg, "Deformation Mechanisms in Yttria-Stabilized Zirconia," J. Mater. Sci., 23, 4144-56 (1988).
31. R. C. Juvinall, Fundamentals of Machine Component Design. Wiley, New York, 1983.
32. J. Alcalá, A.C. Barone, and M. Anglada, "The Influence of Plastic Hardening on Surface Deformation Modes Around Vickers and Spherical Indents," Acta Mater., in press.