Modelling the production and performance analysis of plasma-sprayed ceramic thermal barrier coatings

Archives of Computational Methods in Engineering

Volumn 5, Issue 2, 1998, Pages 59-166

  St Doltsinis, Ioannis ^a   Harding, John ^b   Marchese, Maurizio ^c  

^a UNIVERSITY OF STUTTGART   (Germany)

^b UNIVERSITY COLLEGE LONDON   (United Kingdom)

^c UNIVERSITY OF TRENTO   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 2842608316     PISSN: 11343060     EISSN: None     Source Type: Journal    
DOI: 10.1007/bf02906184     Document Type: Article

References (107)

1. Vardelle, A., Vardelle, M. and Fauchais, P. (1986), "Les transferts de quantité de mouvement et de chaleur plasma particules solides dans un plasma d'arc en extinction", Rev. Int. Hautes Temp. Refract, 23, pp. 69-85.
2. Fauchais, P. Grimaud, A., Vardelle, A. and Vardelle, M. (1989), "La projection par plasma: une revue", Ann. Phys. Fr., 14, pp. 261-310.
3. Westhoff, R., Trapaga, G. and Szekely, J. (1992), "Plasma-Particle Interactions in Plasma Spraying Systems", Metall. Trans. B, 23B, pp. 683-693.
4. Fauchais, P., Coudert, J.F., Vardelle, M., Vardelle, A. and Denoirjean, A. (1992), "Diagnostics of Thermal Spraying Plasma Jets", J. Thermal Spray Tech., 1, p. 117.
5. 2 Plasma", J. High Temp. Chem. Process, Colloque 1, (Supl. No. 3), p. 249.
6. Fauchais, P., Coudert, J.F. and Vardelle, M. (1989), "Diagnostics in Thermal Plasma Spraying" in "Plasma Diagnostics", 1, O. Auciello and D.L. Flamm (Eds.), Academic Press, pp. 349-442.
7. Vardelle, M., Vardelle, A., Fauchais, P. and Boulos, M. (1983), AIchE J., 29.
8. Knotek, O. and Elsing, R. (1987), "Monte Carlo Simulation of the Lamellar Structure of Thermally Sprayed Coatings", Surface and Coating Technology, 32, pp. 261-271.
9. Fukanuma, H. (1992), "An Analysis of the Porosity Producing Mechanism", Proceedings, International Thermal Spray Conference & Exposition, edited by ASM, pp. 767-772.
10. Madejski, J. (1976), "Solidification of Droplets on a Cold Surface", Journal of Heat Mass Transfer, 19, pp. 1009-1013.
11. Pekshev, P.Yu and Murzin, I.G. (1993), "Modelling of Porosity of Plasma Sprayed Materials", Surface and Coating Technology, 56, pp. 199-208.
12. Harmsworth, P.H. and Stevens, R. (1992), "Microstructure of Zirconia-Yttria Plasma- Sprayed Thermal Barrier Coatings", Journal of Materials Science, 27, pp. 616-624.
13. McPherson, R. (1989), "A Review of Microstructure and Properties of Plasma Sprayed Ceramic Coatings", Surface and Coating Technology, 39/40, pp. 173-181.
14. Safai, S. and Herman, H. (1977), "Microstructural Investigation of Plasma-Sprayed Aluminium Coatings", Thin Solid Films, 45, pp. 295-307.
15. Kuroda, S., Fukushima, T. and Kitahara, S. (1988), "Simultaneous Measurement of Coating Thickness and Deposition Stress During Thermal Spraying", Thin Solid Films, 164, pp. 157-163.
16. Trapaga, G., Matthys, E.F., Valencia, J.J. and Szekely, J. (1992), "Fluid Flow, Heat Transfer, and Solidification of Molten Metal Droplets Impinging on Substrates: Comparison of Numerical and Experimental Results", Metallurgical Transactions B, 23B, pp. 701-718.
17. Fantassi, S., Vardelle, M., Fauchais, P. and Moreau, C. (1992), "Investigation of the Splat Formation Versus Different Particulate Temperatures and Velocities Prior to Impact", Proceedings, International Thermal Spray Conference & Exposition, edited by ASM, pp. 755-760.
18. Houben, J.M. (1984), "Future Developments in Thermal Spraying", Proceedings of the Second American Conference on Thermal Spray, Long Beach, California, pp. 1-19.
19. Houben, J.M. (1988), "Relation of the Adhesion of Plasma Sprayed Coatings to the Process Parameters Size, Velocity and Heat Content of the Spray Particles", Ph.D. Thesis, Technische Universiteit Eindhoven, NL.
20. Trapaga, G. and Szekely, J. (1991), "Mathematical Modelling of the Isothermal Impingement of Liquid in Spraying Processes", Metallurgical Transactions B, 22B, pp. 901-914.
21. Yoshida, T., Okada, T., Hideki, H. and Kumaoka, H. (1992), "Integrated Fabrication Process for Solid Oxide Fuel Cells Using Novel Plasma Spraying", Plasma Sources Sci. Tech., 1, pp. 195-201.
22. Fukai, J., Zhao, Z., Poulikakos, D., Megaridis, C.M. and Miyatake, O. (1993), "Modeling of the Deformation of a Liquid Droplet Impinging upon a Flat Surface", Phys. Fluids, A5, 11, pp. 2588-2599.
23. Bertagnolli, M., Marchese, M., Jacucci, G., Doltsinis, I. St. and Nölting, S. (1997), "Thermomechanical Simulation of the Splashing of Ceramic Droplets on a Rigid Substrate", Journal of Computational Physics, 133, pp. 205-221.
24. Doltsinis, I. St. and Nolting, S. (1992), "Generation and Decomposition of Finite Element Models for Parallel Computations", Computing Systems in Engineering, 2, pp. 427-449.
25. Vardelle, M., Vardelle, A., Fauchais, P. and Moreau, C. (1994), "Pyrometer System for Monitoring the Particle Impact on a Substrate during a Plasma Spray Process", Meas. Sci. Technol., 5, pp. 205-212.
26. Fink, J.L., Chasanov, M.G., and Leibowitz, L. (1981), "Transport Properties of Uranium Di-Oxide, ANL-CEN-RSD-80-4, Argonne National Laboratory Report.
27. Fantassi, S., Vardelle, M., Vardelle, A., and Fauchais, P. (1993), "Influence of the Velocity of Plasma Sprayed Particles on the Splat Formation", Proceedings of NTSC' 93, Anaheim, California, published by ASM.
28. Fukai, J., Shiiba, Y., Yamamoto, T., Miyatake, O., Poulikakos, D., Megaridis, C.M. and Zhao, Z. (1995), "Wetting Effects on the Spreading of a Liquid Droplet Colliding with a Flat Surface: Experiment and Modeling", Phys. Fluids, 7, 2, pp. 236-247.
29. San Marchi, C., Liu, H., Lavernia, E.J., Rangel, R.H., Sickinger, A. and Muehlberger, E. (1993), "Numerical Analysis of the Deformation and Solidification of a Single Droplet Impinging onto a Flat Substrate", J. Material Science, 28, pp. 3313-3321.
30. Cirolini, S., Harding, J.H., and Jacucci, G. (1991), "Computer Simulation of Plasma-Sprayed Coatings: I. Coating Deposition Model", Surface and Coating Technology, 48, pp. 137-145.
31. Cirolini, S., Marchese, M., Jacucci, G., Harding, J.H. and Mulheran, P.A, (1994), "Modelling the Microstructure of Thermal Barrier Coatings", Materials and Design Technology PD, 62, T.J. Kozik (Ed.), ASME, pp. 189-198.
32. Bertamini, L., Sturlese, S. and Beber, P. (1993), "Atmosphere and Temperature Controlled Spraying (ATCS) of Thermal Barrier Coating on Aluminium Alloys", Proceedings, International Symposium on Automotive Technology and Automization, Aachen.
33. Wicksell, S.D. (1925), "The Corpuscle Problem. A mathematical Study of a Biometrie Problem", Biometrika, 17, pp. 84-99.
34. Papadakis, E. (1964), "From Micrograph to Grain-Size Distribution with Ultrasonic Applications", J. Appl. Phys., 35, pp. 1586-1594.
35. Nestor, O.H. and Olsen, H.N. (1960), "Numerical Methods for Reducing Line and Surface Probe Data", S.I.A.M. Review, 2, pp. 200-207.
36. Barr, W.L. (1962), "Method for Computing the Radial Distribution of Emitters in a Cylindrical Cource", J. Opt. Sci. Amer., 52, pp. 885-888.
37. Pawlowski, L., Vardelle, M. and Fauchais, P. (1982), "A Model for the Temperature Distribution in an Alumina Coating During Plasma Spraying", Thin Solid Films, 94, pp. 307-319.
38. Fauchais, P. (1995), unpublished work.
39. Vardelle, A., Leger, A.C., Fauchais, P. and Gobin, D. (1994), "Influence of Particle Parameters at Impact on Splat Formation and Solidification in Plasma-Spraying Processes", J. Thermal Spraying Tech., 4, pp. 50-58.
40. McCabe, A. (1995), unpublished results.
41. Maxwell, J.C. (1881), "Treatise on Electricity and Magnetism", 2nd Edition, 400 (Clarendon Press).
42. Batchelor, G.K. (1974), "Transport Properties of Two-Phase Materials with Random Structure", Ann. Rev. Fluid Mech., 6, pp. 227-255.
43. Eshelby, J.D. (1975), "The Determination of the Elastic Field of an Ellipsoidal Inclusion and Related Problems", Proc. Roy. Soc., A241, pp. 376-396.
44. Clyne, T.W. and Withers, P.J. (1993), "An Introduction to Metal-Matrix Composites", Cambridge U.P.
45. Bragg, W.L. and Pippard, A.B. (1953), "The Form Birefringence of Macromolecules", Acta Cryst, 6, p. 865.
46. Mura, T. (1987), "Micromechanics of Defects in Solids", Nijoff, The Hague.
47. Hill, R. (1963), "The Elastic Behaviour of a Crystalline Aggregate", J. Mech. Phys. Solids, 11, p. 357.
48. Hashin, Z. (1988), "The Differential Scheme and its Application to Cracked Materials", J. Mech. Phys., 36, pp. 719-734.
49. Budiansky, B. and O'Connell, R.J. (1976), "Elastic Moduli of a Cracked Solid", Int. J. Solids Struct., 12, p. 81.
50. Carslaw, H.S. and Jaeger, J.C. (1959), "Conduction of Heat in Solids", Clarendon Press.
51. Landau, L. and Lifshitz, I.M. (1960), "Electrodynamics of Continuous Media", Pergamon, especially pp. 26-27.
52. Pedersen, O.B. and Withers, P.J. (1992), "Iterative Estimates of Internal Stresses in Short-Fibre Metal Matrix Composites", Phil. Mag., A65, pp. 1217-1233.
53. Ferrari, M. (1944), "Composite Homogenization via the Equivalent Polyinclusion Approach", Composite Engineering, 4, pp. 37-45.
54. Wu, T.T. (1966), "The Effect of Microcracks on the Elastic Moduli of Brittle Materials", Int. J. Struct., 2, 1.
55. Kachanov, M. (1987), "Elastic Solids with many Cracks: A Simple Method of Analysis", Int. J. Solids and Structures, 23, pp. 23-43.
56. Kachanov, M. (1992), "Effective Elastic Properties of Cracked Solids: Critical Review of Some Basic Concepts, in Micromechanical Modelling of Quasi-Brittle Behaviour", V.C.L. Li (Ed.), Appl. Mech. Rev., 45, pp. 304-335.
57. Muskhelishvili, N. (1953), "Some Basic Problems of the Mathematical Theory of Elasticity, Noordhof.
58. Doltsinis, I.St. and Handel, R. (1996), "Modelling the Behaviour and Failure Analysis of Brittle Microcracking Materials", ECCOMAS'96, Proceedings, John Wiley & Sons, Ltd.
59. Davidge, R.W., Mc Laren, J.R. and Titchell, I. (1983), "Statistical Aspects of Grain Boundary Cracking in Ceramics and Rocks", Fracture Mechanics of Ceramics, 5, pp. 495-506.
60. Buresch, F.E. (1985), "Relations between the Damage in and Microstructure of Ceramics", Materials Science and Engineering, 71, pp. 187-194.
61. Eggers, M., "Untersuchung des Einflusses der MikroStruktur auf thermische Materialeigenschaften am Beispiel plasmagespritzter Keramikschichten", Doctoral Dissertation, Univ. of Stuttgart, 1996.
62. Aboudi, J. (1991), "Mechanics of Composite Materials", Studies in Applied Mechanics, 29, Elsevier, Amsterdam.
63. Landauer, R. (1952), "The Electrical Resistance of Binary Metallic Mixtures", J. Appl. Phys., 23, p. 779.
64. Hasselman, D.P.H. (1978), "Effect of Cracks on Thermal Conductivity, J. Composite Materials, 12, pp. 403-407.
65. Incropera, F. and DeWitt, D. (1981), "Fundamentals of Heat Transfer", J. Wiley & Sons, Inc. New York.
66. Fabercoat Brite/Euram Project No. BREU-0418 (1995), "Fabercoat: Modelling and Characterization of the Manufacturing Process of Ceramic Thermal Barrier Coatings", Final Technical Report, European Union, Bruxelles.
67. O'Keefe, R. (1986), "Simulation and Expert Systems - A Taxonomy and Some Examples", Simulation, 46, 1, pp. 10-16.
68. Cirolini, S., Harding, J.H. and Jacucci, G. (1991), "Computer Simulation of Plasma-Sprayed Coatings: I. Coating deposition model", Surface and Coating Technology, 48, pp. 137-145.
69. Cirolini S., Marchese, M., Jacucci, G. and Harding, J.H. (1995), "Modelling the Deposition Process of Thermal Barrier Coatings", Journal of Plasma Spray, 4, 1, pp. 10-18.
70. Rickerby, D.S., Eckold, G., Scott, K.T. and Buckley-Golder, I.M. (1987), "The Interrelationship between Internal Stress, Processing Parameters and Microstructure of Physically Vapor Deposited and Thermally Sprayed Coatings", Thin Solid Films, 154, pp. 125-141.
71. Holland, J.H. (1975), "Adaptation in Natural and Artificial Systems", University of Michigan Press, Ann Arbor, MI, USA.
72. Goldberg, D.E. (1989), "Genetic Algorithms in Search, Optimization and Machine Learning", Addison-Wesley, Reading, MA., USA.
73. Kvernes, I. and Vincenzini, P. (Ed.) (1987), "High Tech Ceramics", p. 2519, Elsevier, London.
74. Miller, R.A. (1987), "Current Status of Thermal Barrier Coatings - An Overview", Surface and Coating Technology, 30, 1.
75. Lackey, W.J., Stinton, D.P., Cerny, G.A., Fehrenbacher, L.L. and Schaffhauser, A.C. (1984), in: "Ceramic Coatings for Heat Engine Materials-Status and Future Trends, Technical Report ORNL/TM 8959, Oak Ridge National Laboratory, Oak Ridge, TN, USA.
76. Fairbanks, J.W. and Hecht, R.J. (1987), "The Durability and Performance of Coatings in Gas Turbine and Diesel Engine", Mat. Sci. Eng., 88, p. 321.
77. Claussen, N., Ruhle, M. and Heuer, A. (1984), Advances in Ceramics-Science and Technology of Zirconia II, 12, American Ceramic Society, Columbus, OH, USA.
78. 3 Thermal Barrier System", NASA Tech. Memo. 86905.
79. Harmsworth, P.D. and Stevens, R. (1992), Sci., 27, p. 616.
80. 2 Thermal Barrier Coatings", J. Mat. Sci., 26, p. 3991.
81. Jones, R.L. (1991), Materials at High Temperature, 9, p. 228.
82. Borom, M.P. and Johnson, C.A. (1992), "Thermomechanical Behaviour and Phase Relationships of Plasma-Sprayed Zirconia Coatings", Surf. Coat. Technol., 45, pp. 54-55.
83. Stecura, S. (1981), "Effects of Plasma Spray Parameters on Two-Layer Thermal Barrier Coating System Life", NASA, Tech. Memo. 81724.
84. Prater, J.T. and Courtright, E.L. (1987), "Ceramic Thermal Barrier Coatings with Improved Corrosion Resistance", Surf. Coat. Technol., 32, p. 389.
85. Andersson, C.A., Lau, S.K., Bratton, R.J., Lee, S.Y., Rieke, K.L., Allen, J. and Munson, K.E. (1982), NASA CR-165619.
86. Hobbs, M.K. and Reiter, H. (1988), "Thermal Spray: Advances in Coatings Technology", D.L. Houck (Ed.), ASM, Metals Park, OH, USA.
87. Bialucki, P., Kaczmar, W. and Gladysz, J. (1986), Proceeding 11th Int. Thermal Spray Conference, Montreal, PQ, Canada, Pergamon Press, NY, USA.
88. Brite/Euram Project No. BREU-0535 (1995), "Finite Element Modelling of Ceramics TBCs to Extend the Operative Range of Heat Engine Components", Final Technical Report, European Union, Bruxelles, Belgium.
89. Doltsinis, I.St. (1993), "Coupled Field Problems-Solution Techniques for Sequential and Parallel Processing", in "Solving Large-Scale Problems in Mechanics", M. Papadrakakis (Ed.), Wiley.
90. Doltsinis, I.St. (1979), "Zur Berechnung des Rissfortschritts in inelastischen Tragwerken", ZAMP, 30, pp. 57-64.
91. Lee, D., Ra, H.V., Hong, K.T. and Hur, S.K. (1992), "Analysis of Deposition Phenomena and Residual Stress in Plasma Spray Coatings", Surf. Coat. Tech., 56, 27.
92. Rickerby, D.S., Eckold, G., Scott, K.T. and Buckley-Golder, I.M. (1987), "The Interrelation between Internal Stress, Processing Parameters and Microstructure of Physically Vapour Deposited and Thermally Sprayed Coatings", Thin Solid Films, 154, p. 125.
93. Elsing, R., Knotek, O. and Balting, U. (1990), " Calculation of Residual Stress in Plasma Sprayed Coatings", Surf. Coat. Tech., 43/44, p. 416.
94. Gill, S.C. and Clyne, T.W. (1990), "Stress Distribution and Material Response in Thermal Spraying of Metallic and Ceramic Deposit", Metallurgical Transactions, 21B, p. 377.
95. Gill, S.C. and Clyne, T.W. (1994), "Investigations of Residual Stress Generation during Thermal Spraying by Continuous Curvature Measurements", Thin Solid Films, 250, p. 172.
96. Clyne, T.W. and Gill, S.C. (1996), "Residual Stresses in Thermal Spray Coatings and their Effect on Interfacial Adhesion: A Review of Recent Work", Journal of Plasma Spray Tech., 5, 4, p. 401.
97. 3-PSZ Coatings on Piston Heads", Surf. Coat. Technol., pp. 86-87, p. 109.
98. ANSYS User's Guide, Rev. 5.1, Swanson Analysis System Inc., Houston, PA, USA.
99. Barsoum, R.S. (1976), "On the Use of Isoparametric Finite Elements in Linear Fracture Mechanics, Int. J. Num. Meth. Engng., 10, pp. 25-37.
100. CRC-Handbook, Lynch, C.T. (Ed.) (1985), "CRC Handbook of Material Science, II", CRC Press, Siemers, P.A. and Mehan, R.L. (1982), "Mechanical and Physical Properties of Plasma-Sprayed Stabilized Zirconia", Proc. Ceramic Engineering and Science, 3, p. 824.
101. CRC-Handbook, Lynch, C.T. (Ed.) (1985), "CRC Handbook of Material Science, II", CRC Press, Siemers, P.A. and Mehan, R.L. (1982), "Mechanical and Physical Properties of Plasma-Sprayed Stabilized Zirconia", Proc. Ceramic Engineering and Science, 3, p. 824.
102. Matos, B.P.L., McMeeking, R.M., Charalambides, P.G. and Dropy, M.P. (1989), "A Method for Calculating Stress Intensities in Bimaterial Fracture", International Journal of Fracture, 40, pp. 235-254.
103. Wüstenberg, H. (1986), "FEPS 3.3. Finite Element Programming System: User's Guide", ICA Report No. 21, and "FEPS 3.3.: Element Library", ICA Report No. 22, Stuttgart.
104. Doltsinis, I.St., Haller, K.-U. and Handel, R. (1995), "Numerical Analysis of Plasma-Sprayed Ceramic Coatings for High-Temperature Applications", Proceedings 5-th EPMESC Conference, Macau, 1-4 Aug. 1995, pp. 135-150, extended version in Structural Engineering and Mechanics, 4, pp. 679-702.
105. Doltsinis, I.St., Haller, K.-U. and Handel, R. (1995), "Numerical Analysis of Plasma-Sprayed Ceramic Coatings for High-Temperature Applications", Proceedings 5-th EPMESC Conference, Macau, 1-4 Aug. 1995, pp. 135-150, extended version in Structural Engineering and Mechanics, 4, pp. 679-702.
106. Doltsinis, I.St. (1990), "Aspects of Modelling and Computation in the Analysis of Metal Forming", Engineering Computations, 7, pp. 2-20.
107. Doltsinis, I.St., Knapp. H., Streiner, P. and Wüstenberg, H. (1979), ASKA-FM, Fracture Mechanics, ASKA UM 226, ISD-Stuttgart.