Modelling the transient heat transfer in the ceramic combustion chamber walls of a low heat rejection diesel engine

International Journal of Vehicle Design

Volumn 22, Issue 3, 1999, Pages 195-215

  Rakopoulos, C D ^a   Mavropoulos, G C ^a  

^a NATIONAL TECHNICAL UNIVERSITY OF ATHENS   (Greece)

Author keywords

[No Author keywords available]

Indexed keywords

COMBUSTION CHAMBERS; FINITE ELEMENT METHOD; HEAT TRANSFER; THERMAL EFFECTS; THERMODYNAMICS;

CERAMIC COMBUSTION CHAMBER WALLS; LOW HEAT REJECTION DIESEL ENGINE; THERMAL SHOCK;

DIESEL ENGINES;

EID: 0033321831     PISSN: 01433369     EISSN: None     Source Type: Journal    
DOI: 10.1504/ijvd.1999.001865     Document Type: Article

References (42)

1. Annand, W.J.D. (1963) 'Heat transfer in the cylinders of reciprocating internal combustion engines', Proc. Inst. Mech. Engrs, Vol. 177, pp. 973-990.
2. Assanis, D.N. (1989) 'Effect of combustion chamber insulation on the performance of a low heat rejection diesel engine with exhaust heat recovery', Heat Recovery Systems & CHP, Vol. 9, pp. 475-484.
3. Assanis, D.N. and Badillo, E. (1988) 'Transient analysis of piston-liner heat transfer in low-heat-rejection diesel engines', SAE Paper No. 880189.
4. Benson, R.S. and Whitehouse, N.D. (1979) Internal Combustion Engines, Pergamon Press, Oxford, U.K. (1979).
5. Ferguson, C.R. (1986) Internal Combustion Engines, John Wiley, New York, U.S.A.
6. French, C.C.J. (1972) 'Piston cooling', SAE Paper No. 720024.
7. French, C.C.J. (1984) 'Ceramics in reciprocating internal combustion engines', SAE Paper No. 841135.
8. Gatowski, J.A., Jones, J.D. and Siegla, D.C. (1987) 'Evaluation of the fuel economy potential of the low-heat-rejection diesel engine for passenger-car application', SAE Paper No. 870024.
9. Heywood, J.B. (1988) Internal Combustion Engine Fundamentals, McGraw-Hill, New York, U.S.A.
10. Kamo, R. and Bryzik, W. (1984) 'Cummins/TACOM advanced adiabatic engine', SAE Paper No. 840428.
11. Kamo, R., Bryzik, W., Reid, M. and Woods, M. (1997a) 'Coatings for improving engine performance', SAE Paper No. 970204.
12. Kamo, L.S., Kleyman, A.S., Bryzik, W. and Mekari, M. (1997b) 'High temperature tribological coatings for advanced military diesel engines', SAE Paper No. 970203.
13. Keribar, R. and Morel, T. (1987) 'Thermal shock calculations in I.C. engines', SAE Paper No. 870162.
14. Kouremenos, D.A., Rakopoulos, C.D. and Hountalas, D.T. (1989) 'Computer simulation with experimental validation of the exhaust nitric oxide and soot emissions in divided chamber diesel engines', ASME-WA Meeting, 1989, San Francisco, CA., Proc. AES, Vol. 10 (1), pp. 15-28.
15. Kouremenos, D.A., Rakopoulos, C.D. and Hountalas, D.T. (1990) 'Thermodynamic analysis of indirect injection diesel engines by two-zone modelling of combustion', Trans. ASME, J. Engng Gas Turbines & Power, Vol. 112, pp. 138-149.
16. Kouremenos, D.A., Rakopoulos, C.D., Mavropoulos, G.C. and Hountalas, D.T. (1991) 'Modelling the transient temperature field in the combustion chamber surfaces of internal combustion engines using finite element analysis', Proc. 10th IASTED MIC Intern. Conf., 1991, Innsbruck, Austria, pp. 458-462.
17. Kouremenos, D.A., Rakopoulos, C.D. and Hountalas, D.T. (1992) 'Prechamber and main chamber insulation effects on the performance of an IDI diesel engine coupled to power turbine', Heat Recovery Systems & CHP, Vol. 12, pp. 247-256.
18. Morel, T. Wahiduzzaman, S. and Fort, E.F. (1988) 'Heat transfer experiments in an insulated diesel', SAE Paper No. 880186.
19. Myers, G.E. (1971) Analytical Methods in Conduction Heat Transfer, McGraw-Hill, New York, U.S.A.
20. Prasad, R. and Samria, N.K. (1990) 'Heat transfer and stress fields in the inlet and exhaust valves of a semi-adiabatic diesel engine',Computers & tructures Vol. 34, pp. 765-777.
21. Prasad, R. and Samria, N.K. (1990) 'Transient heat transfer analysis in an internal combustion engine piston', Computers & Structures, Vol. 34, pp. 787-793.
22. Rakopoulos, C.D. (1991) 'Influence of ambient temperature and humidity on the performance and emissions of nitric oxide and smoke of high speed diesel engines in the Athens/Greece region', Energy Convers. & Mgmt, Vol. 31, pp. 447-458.
23. Rakopoulos, C.D. and Hountalas, D.T. (1985) 'The prediction of heat release and nitrogen oxides in diesel engines as a function of various operating conditions by mono-zone modelling', Proc. 85 AMSE Intern. Conf., 1985, Tunisia, Vol. 3B, pp. 70-80.
24. Rakopoulos, C.D. and Mavropoulos, G.C. (1996) 'Study of the steady and transient temperature field and heat flow in the combustion chamber components of a medium speed diesel engine using finite element analyses', Energy Res., Vol. 20, pp. 437-464.
25. Rakopoulos, C.D. and Mavropoulos, G.C. (1997) 'Modelling the heat transfer mechanism in the ceramic combustion chamber components of a DI diesel engine', Proc. 1st Meeting of the Greek Section of the Combustion Institute, 1997, Athens, pp. 365-370.
26. Rakopoulos, C.D. and Mavropoulos, G.C. (1998) 'Components heat transfer studies in a low heat rejection DI diesel engine using a hybrid thermostructural finite element model', Applied Thermal Engineering, Vol. 18, pp. 301-316.
27. Rakopoulos, C.D., Andritsakis, E.G. and Hountalas, DT. (1995a) 'The influence of the exhaust system unsteady gas flow and insulation on the performance of a multi-cylinder turbocharged diesel engine', Heat Recovery Systems & CHP, Vol. 15, pp. 51-72.
28. Rakopoulos, C.D., Taklis, G.N. and Tzanos, E.I. (1995b) 'Analysis of combustion chamber insulation effects on the performance and exhaust emissions of a DI diesel engine using a multi-zone model', Heat Recovery Systems & CHP, Vol. 15, pp. 691-707.
29. Rakopoulos, C.D., Hountalas, D.T., Taklis, G.N. and Tzanos, E.I. (1995c) 'Analysis of combustion and pollutants formation in a direct injection diesel engine using a multi-zone model', Energy Res., Vol. 19, pp. 63-88.
30. Rakopoulos, C.D., Giakoumis, E.G. and Hountalas, D.T. (1997a) 'A simulation analysis of the effect of governor technical characteristics and type on the transient performance of a naturally aspirated IDI diesel engine', SAE Paper No 970633. Also, Trans. SAE, J. of Engines (1997), Vol. 106, pp. 905-922.
31. Rakopoulos, C.D., Hountalas, D.T., Mavropoulos, G.C. and Giakoumis, E.G. (1997b) 'An integrated transient analysis simulation model applied in thermal loading calculations of an air-cooled diesel engine under variable speed and load conditions', SAE Paper No. 970634. Also, Trans. SAE, J. of Engines (1997), Vol. 106, pp. 923-939.
32. Rakopoulos, C.D., Mavropoulos, G.C. and Hountalas, D.T. (1998) 'Modeling the stuctural thermal response of an air-cooled diesel engine under transient operation including a detailed thermodynamic description of boundary conditions', SAE Paper No. 981024.
33. Samria, N.K. and Prasad, R. (1990) 'A generalized solution for transient temperature distribution in an internally/externally insulated cylindrical shell', Computers & Structures, Vol. 34, pp. 779-785.
34. Seale, W.J. and Taylor, D.H.C. (1970-71) 'Spatial variation of heat transfer to pistons and liners of some medium speed diesel engines', Proc. Inst. Mech. Engrs, Vol. 185, pp. 203-218.
35. Sitkei, G. (1974) Heat Transfer and Thermal Loading in Internal Combustion Engines, Akademiai Kiado, Budapest, Hungary.
36. Welty, J.R. (1974) Engineering Heat Transfer, John Wiley, New York, U.S.A.
37. Whitehouse, N.D. (1970-71) 'Heat transfer in a quiescent chamber diesel engine', Proc. Inst. Mech. Engrs, Vol. 185, pp. 963-975.
38. Whitehouse, N.D. and Way, R.G.B. (1969-70) 'Rate of heat release in diesel engines and its correlation with fuel injection data', Proc. Inst. Mech. Engrs, Vol. 184, pp. 17-29.
39. Williams, T.J. and Whitehouse, N.D. (1976) 'Investigation into some aspects of the computation of diesel engine combustion', Proc. Inst. Mech. Engrs, Vol. 190, pp. 467-475.
40. Woschni, G. and Spindler, W. (1988) 'Heat transfer with insulated combustion chamber walls and its influence on the performance of diesel engines', Trans. ASME, J. Engng Gas Turbines & Power, Vol. 110, pp. 482-488.
41. Woschni, G., Kolesa, K. and Spindler, W. (1986) 'Isolierung der Brennraumwande-ein Iohnendes Entwicklungsziel bei Verbrennungsmotoren?', MTZ, Vol. 47, pp. 495-500.
42. Zienkiewicz, O.C. (1971) The Finite Element Method in Engineering Science, McGraw-Hill, London, U.K.