Electromagnetic properties of Si-C-N based ceramics and composites

International Materials Reviews

Volumn 59, Issue 6, 2014, Pages 326-355

  Yin, Xiaowei ^a   Kong, Luo ^a   Zhang, Litong ^a   Cheng, Laifei ^a   Travitzky, Nahum ^b   Greil, Peter ^b  

^a NORTHWESTERN POLYTECHNICAL UNIVERSITY   (China)

^b UNIVERSITY OF ERLANGEN NUREMBERG   (Germany)

Author keywords

Ceramic matrix composites; Chemical vapour infiltration (CVI); Dielectric properties; Electromagnetic interference (EMI) shielding; Electromagnetic wave transmission; Microwave absorbing; Polymer derived ceramics (PDC); Porous ceramics

Indexed keywords

AIRCRAFT MATERIALS; CERAMIC MATERIALS; CERAMIC MATRIX COMPOSITES; COMMUNICATION SYSTEMS; DIELECTRIC PROPERTIES; ELECTRIC PROPERTIES; ELECTROMAGNETIC PULSE; ELECTROMAGNETIC SHIELDING; ELECTROMAGNETIC WAVE TRANSMISSION; ELECTROMAGNETISM; ELECTRONICS PACKAGING; HYBRID MATERIALS; MECHANICAL PROPERTIES; MICROELECTRONICS; PERMITTIVITY; SHIELDING; SILICON CARBIDE; STRUCTURAL CERAMICS;

CHEMICAL VAPOUR INFILTRATION; HIGH-TEMPERATURE MECHANICAL PROPERTIES; MICROWAVE ABSORBING; POLYMER-DERIVED CERAMICS; POROUS CERAMICS; TELECOMMUNICATION BASE STATION; TUNABLE DIELECTRIC PROPERTIES; WIRELESS COMMUNICATION SYSTEM;

SILICON;

EID: 84903537912     PISSN: 09506608     EISSN: 17432804     Source Type: Journal    
DOI: 10.1179/1743280414Y.0000000037     Document Type: Review

References (260)

1. P. C. P. Watts, W. K. Hsu, A. Barnes and B. Chambers: 'High permittivity from defective multiwalled carbon nanotubes in the X-band', Adv. Mater., 2003, 15, 600-603.
2. K. Fenske and D. Misra: 'Dielectric materials at microwave frequencies', Appl. Microwaves Wireless, 2000, 12, 92-100.
3. P. C. P. Watts, D. R. Ponnampalam, W. K. Hsu, A. Barnes and B. Chambers: 'The complex permittivity of multi-walled carbon nanotube-polystyrene composite films in X-band', Chem. Phys. Lett., 2003, 378, 609-614.
4. W. D. Kingery, H. K. Bowen and D. R. Uhlmann: 'Introduction to ceramics', 2nd edn, 947; 1976, New York, John Wiley & Sons Inc.
5. I. Huynen, N. Quievy, C. Bailly, P. Bollen, C. Detrembleur, S. Eggermont, I. Molenberg, J. M. Thomassin, L. Urbanczyk and T. Pardoen: 'Multifunctional hybrids for electromagnetic absorption', Acta Mater., 2011, 59, 3255-3266.
6. J. Huo, L. Wang and H. Yu: 'Polymeric nanocomposites for electromagnetic wave absorption', J. Mater. Sci., 2009, 44, 3917-3927.
7. L. B. Kong, Z. W. Li, L. Liu, R. Huang, M. Abshinova, Z. H. Yang, C. B. Tang, P. K. Tan, C. R. Deng and S. Matitsine: 'Recent progress in some composite materials and structures for specific electromagnetic applications', Int. Mater. Rev., 2013, 58, 203-259.
8. F. Qin and C. Brosseau: 'A review and analysis of microwave absorption in polymer composites filler with carbonaceous particles', J. Appl. Phys., 2012, 111, 061301.
9. P. Zhang, D. Jia, Z. Yang, X. Duan and Y. Zhou: 'Progress of a novel non-oxide Si-B-C-N ceramic and its matrix composites', J. Adv. Ceram., 2012, 1, 157-178.
10. Y. F. He, R. Z. Gong, Y. Nie, H. H. He and Z. S. Zhao: 'Optimization of two-layer electromagnetic wave absorbers composed of magnetic and dielectric materials in gigahertz frequency band', J. Appl. Phys., 2005, 98, 084903.
11. C. Brosseau: 'Modelling and simulation of dielectric heterostructures: a physical survey from an historical perspective', J. Phys. D: Appl. Phys., 2006, 39, 1277-1294.
12. C. Brosseau, P. Queffelec and P. Talbot: 'Microwave characterization of filled polymers', J. Appl. Phys., 2001, 89, 4532.
13. P. Talbot, A. M. Konn and C. Brosseau: 'Electromagnetic characterization of fine-scale particulate composite materials', J. Magn. Magn. Mater., 2002, 249, 481-485.
14. 3/Ni nanocomposites observed via microwave spectroscopy', Appl. Phys. Lett., 2008, 92, 233110.
15. S. Rea, D. Linton, E. Orr and J. McConnell: 'Electromagnetic shielding properties of carbon fibre composites in avionic systems', Microwave Rev., 2005, 6, 29-32.
16. S. Stanislaw: 'Cancer morbidity in subjects occupationally exposed to high frequency (radiofrequency and microwave) electromagnetic radiation', Sci. Total. Environ., 1999, 180, 9-17.
17. I. W. Nam, H. K. Kim and H. K. Lee: 'Influence of silica fume additions on electromagnetic interference shielding effectiveness of multi-walled carbon nanotube/cement composites', Constr. Build. Mater., 2012, 30, 480-487.
18. D. D. L. Chung: 'Materials for electromagnetic interference shielding', JMEPEG, 2000, 9, 350-354.
19. K. Lakshmi, H. John, K. T. Mathew, R. Joseph and K. E. George: 'Microwave absorption, reflection and EMI shielding of PU-PANI composite', Acta Mater., 2009, 57, 371-375.
20. J. Wu and D. D. L. Chung: 'Increasing the electromagnetic interference shielding effectiveness of carbon fibre polymer-matrix composite by using activated carbon fibres', Carbon, 2002, 40, 445-467.
21. J. Yuan, B. Wen and Z. Hou: 'High-temperature permittivity and data-mining of silicon dioxide at GHz band', Chin. Phys. Lett., 2012, 29, 027701.
22. J. W. Swart, J. A. Diniz and I. Doi: 'Modification of the refractive index and the dielectric constant of silicon dioxide by means of ion implantation', Nucl. Instrum. Methods Phys. Res. B, 2000, 166-167, 171-176.
23. R. Kochetov, T. Andritsch and P. H. F. Morshuis: 'Effect of filler size on complex permittivity and thermal conductivity of epoxybased composites filled with BN particles', 2010 Annual Report Conference on Electrical Insulation and Dielectric Phenomena, West Lafayette, 1-4, 2010.
24. M. Valentinotti, S. Walter and S. Modena: 'Low dielectric constant porous BN/SiCO made by pyrolysis of filled gels', J. Eur. Ceram. Soc, 2007, 27, 2529-2533.
25. C. Zhang and G. C. Stevens: 'Dielectric properties of boron nitride filled epoxy composites', 2006 Annual Report Conference on Electrical Insulation and Dielectric Phenomena, Kansas City, 19-22, 2006.
26. D. P. Kim, C. G. Cofer and J. Economy: 'Fabrication and properties of ceramic composites with a boron nitride matrix', J. Am. Ceram. Soc, 1995, 78, 1546-1552.
27. R. Kochetov, T. Andritsch and U. Lafont: 'Preparation and dielectric properties of epoxy-BN and epoxy-AlN nanocomposites', 2009 IEEE Electrical Insulation Conference, Montreal, QC, Canada, 31 May-3 June 2009.
28. H. Couderc, M. Frechette and S. Savoie: 'Dielectric and thermal properties of boron nitride and silica epoxy composites', Proceedings of IEEE International Symposium on Electrical Insulation, San Juan, 64-68, 2012.
29. 2 increased by electrode profile and material', 1999 Annual Report Conference on Electrical Insulation and Dielectric Phenomena, Austin, 70-73, 1999.
30. 4 nanocomposites', Chin. Phys. Lett., 2008, 25, 2249-2252.
31. 4 nanocomposites', Mater. Sci. Eng. A, 2007, 458, 7-10.
32. R. Zhang, D. Fang and X. Chen: 'Effect of pre-oxidation on the microstructure, mechanical and dielectric properties of highly porous silicon nitride ceramics', Ceram. Intern., 2012, 38, 6021-6026.
33. 4-based sandwich ceramics', Mater. Des., 2012, 35, 770-773.
34. 2 ceramics with considerable flexural strength prepared by low temperature sintering in air', Mater. Sci. Technol, 2010, 26, 996-1000.
35. 4', J. Mater. Sci, 2010, 45, 3671-3676.
36. T. Zhang, S. R. Zhang and M. Q. Wu: 'Studies on dielectric properties of silicon nitride at high temperature', J. Electron. Sci. Tech. China, 2007, 5, 316-319.
37. 3 nanostructures', J. Mater. Chem., 2011, 21, 3952-3959.
38. R. Ravindran, K. Gangopadhyay, S. Gangopadhyay, N. Mehta and N. Biswas: 'Permittivity enhancement of aluminum oxide thin films with the addition of silver nanoparticles', Appl. Phys. Lett., 2006, 89, 263511.
39. H. Yang, M. Cao, Y. Li, H. Shi, Z. Hou, X. Fang, H. Jin, W. Wang and J. Yuan: 'Enhanced dielectric properties and excellent microwave absorption of SiC powders driven with NiO nanorings', Adv. Opt. Mater., 2014, 2, 214-219.
40. B. Zhang, J. Li and J. Sun: 'Nanometer silicon carbide powder synthesis and its dielectric behavior in the GHz range', J. Eur. Ceram. Soc, 2002, 22, 93-99.
41. J. Sun, J. Li and G. Sun: 'Dielectric and infrared properties of silicon carbide nanopowders', Ceram. Intern., 2002, 28, 741-745.
42. S. C. Chiu, H. C. Yu and Y. Y. Li: 'High electromagnetic wave absorption performance of silicon carbide nanowires in the gigahertz range', J. Phy. Chem. C, 2010, 114, 1947-1952.
43. A. Kassibaa, M. Tabellout and S. Charpentier: 'Conduction and dielectric behaviour of SiC nano-sized materials', Solid State Commun., 2000, 115, 389-393.
44. 4- SiC ceramic', Scripta Mater., 2010, 63, 657-660.
45. D. Zhao, H. Zhao and W. Zhou: 'Dielectric properties of nano Si-C-N composite powder and nano SiC powder at high frequencies', Phys. E, 2001, 9, 679-685.
46. 2 atmosphere', J. Eur. Ceram. Soc, 2014, 34, 589-598.
47. T. Jiang: 'Electronic properties and microstructures of amorphous SiCN ceramics derived from polymer precursors', Doctoral thesis, University of Central Florida, Orlando, 2009, 102-114.
48. J. Runyan, R. A. Gerhardt and R. Ruh: 'Electrical properties of boron nitride matrix composites: II, dielectric relaxations in boron nitride-silicon carbide composites', J. Am. Ceram. Soc, 2001, 84, 1497-1503.
49. 4-SiBC composite ceramic and its excellent electromagnetic properties', J. Eur. Ceram. Soc, 2012, 32, 4025-4029.
50. Z. Yu, H. Min and J. Zhan: 'Preparation and dielectric properties of polymer-derived SiCTi ceramics', Ceram. Intern., 2013, 39, 3999-4007.
51. 2/hydroxyapatite composites', Appl. Phys. Lett., 2006, 88, 052903.
52. 2 powders', J. Alloys Compd., 2013, 576, 43-47.
53. 2/polyaniline composites', J. Mater. Sci, 2009, 44, 945-948.
54. 3 composites', J. Appl. Phys., 2008, 103, 124103.
55. 2/Yttria-stabilized zirconia composites', Appl. Phys. Lett., 2005, 87, 172902.
56. 3 hybrids', J. Appl. Phys., 2007, 102, 056104.
57. X. Zhao, A. A. Koos and B. T. T. Chu: 'Spray deposited fluoropolymer/multi-walled carbon nanotube composite films with high dielectric permittivity at low percolation threshold', Carbon, 2009, 47, 561-569.
58. P. Pötschkea, S. M. Dudkinb and I. Aligb: 'Dielectric spectroscopy on melt processed polycarbonate-multiwalled carbon nanotube composites', Polymer, 2003, 44, 5023-5030.
59. Z. M. Dang, L. Wang and Y. Yin: 'Giant dielectric permittivities in functionalized carbon-nanotube/electroactive-polymer nanocomposites', Adv. Mater., 2007, 19, 852-857.
60. L. Kong, X. Yin, X. Yuan, Y. Zhang, X. Liu, L. Cheng and L. Zhang: 'Electromagnetic wave absorption properties of graphene modified with carbon nanotube/poly (dimethyl siloxane) composites', Carbon, 2014, 73, 185-193.
61. Z. Peng, J. Peng and Y. Peng: 'Complex permittivity and microwave absorption properties of carbon nanotubes/polymer composite: a numerical study', Phys. Lett. A, 2008, 372, 3714-3718.
62. M. A. Soloman, P. Kurian and M. R. Anantharaman: 'Effect of carbon black on the mechanical and dielectric properties of rubber ferrite composites containing barium ferrite', J. Appl. Polym. Sci., 2003, 89, 769-778.
63. M. Imai, K. Akiyama and T. Tanaka: 'Highly strong and conductive carbon nanotube/cellulose composite paper', Compos. Sci. Technol., 2010, 70, 1564-1570.
64. W. Song, M. Cao and Z. Hou: 'High-temperature microwave absorption and evolutionary behavior of multiwalled carbon nanotube nanocomposite', Scripta Mater., 2009, 61, 201-204.
65. S. L. Shi and J. Liang: 'The effect of multi-wall carbon nanotubes on electromagnetic interference shielding of ceramic composites', Nanotechnology, 2008, 19, 255707.
66. C. A. Grimes, C. Mungle and D. Kouzoudis: 'The 500 MHz to 5.50 GHz complex permittivity spectra of single-wall carbon nanotube-loaded polymer composites', Chem. Phys. Lett., 2000, 319, 460-464.
67. F. El-Tantawy, A. A. Al-Ghamdi and N. A. Aal: 'New PTCR thermistors, switching current, and electromagnetic shielding effectiveness from nanosized vanadium sesquioxides ceramic reinforced epoxy resin nanocomposites', J. Appl. Polym. Sci, 2010, 115, 817-825.
68. N. A. Aal, F. El-Tantawy, A. Al-Hajry and M. Bououdina: 'New antistatic charge and electromagnetic shielding effectiveness from conductive epoxy resin/plasticized carbon black composites', Polym. Compos., 2008, 29, 125-132.
69. K. Lichtenecker and K. Rother: 'Deduction of the logarithmic mixture law from general principles', Phys. Z., 1931, 32, 255-260.
70. S. J. Penn, N. M. Alford, A. Templeton, X. Wang, M. Xu, M. Reece and K. Schrapel: 'Effect of porosity and grain size on the microwave dielectric properties of sintered alumina', J. Am. Ceram. Soc, 1997, 80, 1885-1888.
71. R. B. Sosman: 'The properties of silica', 1927, New York, Chemical Catalog Co. available at University Microfilm, 300 N. Zeeb Rd., Ann Arbor MI 48106 (313-761-4700).
72. V. E. Bottom: 'Dielectric constants of quartz', J. Appl. Phys., 1972, 43, 1493-1495.
73. H. Jair and A. S. Nowick: 'Electrical conductivity of synthetic and natural quartz crystals', J. Appl. Phys., 1982, 53, 477-484.
74. B. N. Harden: 'Dielectric properties of crystal quartz at high frequencies', Physical Sciences, N. Z. Science Congress, Wellington, 45-50; 1947.
75. T. Sugino, T. Tai and Y. Etou: 'Synthesis of boron nitride film with low dielectric constant for its application to silicon ultralarge scale integrated semiconductors', Diamond Relat. Mater., 2001, 10, 1375-1379.
76. 2-BN ceramics for high-temperature dielectric applications', J. Eur. Ceram. Soc, 2000, 20, 1923-1928.
77. 4 ceramics prepared via low temperature sintering', Ceram. Intern., 2009, 35, 1699-1703.
78. 3-doped porous silicon nitride ceramics using phenolic resin as poreforming agent', Intern. J. Appl. Ceram. Technol, 2010, 7, 391-399.
79. T. K. Gupta: 'Copper interconnect technology'; 2009, New York, Springer.
80. T. Ohji and M. Fukushima: 'Macro-porous ceramics: processing and properties', Intern. Mater. Rev., 2012, 57, 115-131.
81. 4 structured porous ceramics using carbothermal nitridation of silica', Acta Mater., 2005, 53, 2981-2990.
82. 4 ceramics with rod-shaped pore structure', J. Am. Ceram. Soc, 2005, 88, 1030-1032.
83. 4 and carbon', Acta Mater., 2002, 50, 4831-4840.
84. 4 composite ceramics prepared by gel casting', Ceram. Intern., 2013, 39, 4231-4237.
85. 4 composites using polyacrylamide as an addition agent', J. Alloys Compd., 2010, 506, 423-427.
86. F. Ye, J. Zhang, H. Zhang and L. Liu: 'Effect of sintering temperature on microstructure and mechanical properties of highly porous silicon nitride ceramics produced by freeze casting', Mater. Sci. Eng. A, 2010, 527, 6501-6504.
87. F. Ye, J. Zhang, L. Liu and H. Zhang: 'Effect of solid content on pore structure and mechanical properties of porous silicon nitride ceramics produced by freeze casting', Mater. Sci. Eng. A, 2011, 528, 1421-1424.
88. 4 ceramics with a dense surface', Int. J. Appl. Ceram. Technol, 2011, 8, 627-636.
89. 2O for high performance radomes', Mater. Sci. Eng., 1985, 71, 265-272.
90. D. Jia, Y. Shao, B. Liu and Y. Zhou: 'Characterization of porous silicon nitride/silicon oxynitride composite ceramics produced by sol infiltration', Mater. Chem. Phys., 2010, 124, 97-101.
91. S. Ding, Y. Zeng and D. Jiang: 'Oxidation bonding of porous silicon nitride ceramics with high strength and low dielectric constant', Mater. Lett., 2007, 61, 2277-2280.
92. 2 composite ceramics', Mater. Sci. Eng. A, 2009, 500, 63-69.
93. 4/BN composites fabricated by RBSN technique', Int. J. Appl. Ceram. Technol, 2010, 7, 536-545.
94. H. Miyazaki, Y. Yoshizawa and K. Hirao: 'Fabrication of high thermal-conductive silicon nitride ceramics with low dielectric loss', Mater. Sci. Eng. B, 2009, 161, 198-201.
95. 2 ceramic incorporated with boron nitride nanotubes', Mater. Sci. Eng. A, 2012, 543, 271-276.
96. 4 wave-transparent composites with high strength and low dielectric constant', J. Nanomater, 2011, 2011, 1-5.
97. 2 based microwave-transparent materials', Key Eng. Mater., 2008, 368-372, 913-916.
98. 4', J. Mater. Sci, 1989, 24, 821-826.
99. 4 ceramic', Scripta Mater., 2012, 66, 33-36.
100. J. S. Lyons and T. L. Starr: 'Strength and toughness of slip-cast fused-silica composites', J. Am. Ceram. Soc, 1994, 77, 1673-1675.
101. F. P. Meyer, G. D. Quinn and J. C. Walck: 'Reinforcing fused silica with high purity fibre', Ceram. Eng. Sci. Proc, 1985, 6, 646-656.
102. J. P. Brazel and R. Fenton: 'ADL-4D6: a silica/silica composite for hardened antenna windows', Proc. 13th Symposium on Electromagnetic Windows, Georgia Institute of Technology, Atlanta, Georgia, USA, 1976;9-16.
103. 2 composite materials', Rare Metal Mater. Eng., 2007, 36, 515-518.
104. L. M. Manocha, C. N. Panchal and S. Manocha: 'Silica/silica composites through electrophoretic infiltration', Ceram. Engin. Sci. Proceed, 2002, 23, 655-661.
105. 2 nanocomposites dipped with silicon resin', Key Eng. Mater., 2007, 336-338, 1239-1241.
106. 2 composites fabricated through a sol-gel process', Powder Technol., 2013, 239, 374-380.
107. D. Kicevic, M. Gasic and D. Markovic: 'A statistical analysis of the influence of processing conditions on the properties of fused silica', J. Eur. Ceram. Soc, 1996, 16, 857-864.
108. J. D. Walton: 'Volume II, Proceedings of the Second International Conference on Electromagnetic Windows', Paris, France, September 1971, 8-10.
109. S. Hampshire, in 'Engineered materials handbook', (ed. S. J. Schneider Jr), Vol. 4, 812-820; 1991, Metals Park, ASM International.
110. M. Ohashi, S. Kanzaki and H. Tabata: 'Effect of additives on some properties of silicon oxynitride ceramics', J. Mater. Sci., 1991, 26, 2608-2614.
111. B. Komiyama, M. Kiyokawa and T. Marstui: 'Open resonator for precision dielectric measurements in the 100GHz band', IEEE Trans. Microwave Theory Tech., 1991, 39, 792-1799.
112. Z. Chen, C. Xu, C. Ma, W. Ren and H. Cheng: 'Lightweight and flexible graphene foam composites for high-performance electromagnetic interference shielding', Adv. Mater., 2013, 25, 1296-1300.
113. Y. Yang, M. C. Gupta, K. L. Dudley and R. W. Lawrence: 'Novel carbon nanotube-polystyrene foam composites for electromagnetic interference shielding', Nano. Lett., 2005, 5, 2131-2134.
114. N. Li, Y. Huang, F. Du, X. B. He, X. Lin, H. J. Gao, Y. F. Ma, F. F. Li, Y. S. Chen and P. C. Eklund: 'Electromagnetic interference (EMI) shielding of single-walled carbon nanotube epoxy composites', Nano Lett., 2006, 6, 1141-1145.
115. A. Bara, A. M. Bondar, I. Iordache, R. Vasilescu-Mirea, C. Banciu, D. Patroi and S. Hodorogea: Rev. Roum. Sci. Techn. - Électrotechn. et Énerg., 53, (Suppl), 13-20, Bucarest, 2008.
116. 4 incorporated polyaniline as a high performance shield against electromagnetic pollution', Nanoscale, 2013, 5, 2411-2420.
117. J. E. Brittain: 'Sergei A. Schelkunoff and the antenna theoryscanning the past', Proc. IEEE, 1996, 84, 1344.
118. S. A. Schelkunoff: 'Electromagnetic waves'; 1943, Princeton NJ, D. Van Nostrand.
119. R. B. Schulz: 'ELF and VLF shielding effectiveness of highpermeability materials', IEEE Trans. Electron. Compat, 1968, EMC-10, (1), 95-100.
120. M. H. Al-Saleh and U. Sundararaj: 'Electromagnetic interference shielding mechanisms of CNT/polymer composites', Carbon, 2009, 47, 1738-1746.
121. K. L. Kaiser: 'Electromagnetic shielding'; 2006, Boca Raton, FL, CRC Press.
122. M. H. Al-Saleh and U. Sundararaj: 'X-band EMI shielding mechanisms and shielding effectiveness of high structure carbon black/polypropylene composites', J. Phys. D: Appl. Phys., 2013, 46, 035304.
123. F. Nanni, P. Travaglia and M. Valentini: 'Effect of carbon nanofibres dispersion on the microwave absorbing properties of CNF/epoxy composites', Compos. Sci. Technol., 2009, 69, 485-490.
124. S. Ramo, J. R. Whinnery and T. V. Duzer: 'Fields and waves in communication electronics'; 1984, New York, John Wiley and Sons.
125. D. D. L. Chung: 'Electromagnetic interference shielding effectiveness of carbon materials', Carbon, 2001, 39, 279-285.
126. D. J. Bergman and Y. Imry: 'Critical behavior of complex dielectric-constant near percolation threshold of a heterogeneous material', Phys. Rev. Lett., 1977, 39, 1222-1225.
127. A. B. Harris: 'Field-theoretic approach to biconnectedness in percolating systems', Phys. Rev. B, 1983, 28, 2614-2629.
128. Y. Song, T. W. Noh, S.-I. Lee and J. R. Gaines: 'Experimental study of the three-dimensional ac conductivity and dielectric constant of a conductor-insulator composite near the percolation threshold', Phys. Rev. B, 1986, 33, 904-908.
129. Y. Meir: 'Percolation-type description of the metal-insulator transition in two dimensions', Phys. Rev. Lett., 1999, 83, 3506-3509.
130. V. Myroshnychenko and C. Brosseau: 'Finite-element modeling method for the prediction of the complex effective permittivity of two-phase random statistically isotropic heterostructures', J. Appl. Phys., 2005, 97, 044101.
131. C. Brosseau and D. Bicout: 'Entropy production in multiple scattering of light by a spatially random medium', Phys. Rev. E, 1994, 50, 4997-5005.
132. D. S. Mclachlan, W. Heiss, C. Chiteme and J. Wu: 'Analytic scaling functions applicable to dispersion measurements in percolative metal-insulator systems', Phys. Rev. B, 1998, 58, 13558.
133. C. Brosseau: 'Generalized effective medium theory and dielectric relaxation in particle-filled polymeric resins', J. Appl. Phys., 2002, 91, 3197-3204.
134. N. F. Colaneri and L. W. Shaklette: 'EMI shielding measurement of conductive polymer blends', IEEE Trans. Instrum. Meas., 1992, 41, 291-297.
135. Y. K. Hong, C. Y. Lee, C. K. Jeong, D. E. Lee, K. Kim and J. Joo: 'Method and apparatus to measure electromagnetic interference shielding efficiency and its shielding characteristics in broadband frequency ranges', Rev. Sci. Instrum., 2003, 74, 1098-1102.
136. J. Wang, C. Xiang, Q. Liu, Y. Pan and J. Guo: 'Ordered mesoporous carbon/fused silica composites', Adv. Funct. Mater., 2008, 18, 2995-3002.
137. X. Luo and D. D. L. Chung: 'Electromagnetic interference shielding using continuous carbon-fibre carbon-matrix and polymer-matrix composites', Compos. Part B, 1999, 30, 227-231.
138. Z. M. Sun: 'Progress in research and development on MAX phases: a family of layered ternary compounds', Intern. Mater. Rev., 2011, 56, 143-166.
139. n phases: a new class of solids', Prog. Solid State Chem., 2000, 28, 201-281.
140. Y. Zhou and Z. Sun: 'Electronic structure and bonding properties of layered ternary carbide Ti3SiC2', J. Phys. Condens. Mater., 2000, 12, 457-462.
141. Low It-Meng (EDT) Zhou Yanchun (EDT): 'Max phases: microstructure, properties and applications (Materials Science and Technologies) ', 53-71; 2012, New York, Nova Science Pub Inc.
142. X. Yin, S. He, L. Zhang, S. Fan, L. Cheng, G. Tian and T. Li: 'Fabrication and characterization of a carbon fibre reinforced carbon-silicon carbide-titanium silicon carbide hybrid matrix composite', Mater. Sci. Eng. A, 2010, 527, 835-841.
143. 2-based ceramics', J Am. Ceram. Soc, 2011, 94, 969-972.
144. X. Fan, X. Yin, Y. Cheng, L. Zhang and L. Cheng: 'Microstructure and tribological behaviors of C/C-BN composites fabricated by chemical vapor infiltration', Ceram. Intern., 2012, 38, 6137-6144.
145. 2 composites fabricated by liquid silicon infiltration', Corros. Sci, 2013, 74, 98-105.
146. 2 material: an application for electromagnetic interference shielding', Appl. Phys. Lett., 2008, 93, 172903.
147. A. M. Bondar and I. Iordache: 'Carbon/ceramic composites designed for electrical application', J. Optoelectron. Adv. Mater., 2006, 8, 631-637.
148. 2 composites with an ordered inter-filled string mesostructure', Mater. Lett., 2012, 85, 117-119.
149. S. H. Park, P. Theilmann, P. Asbeck and P. R. Bandaru: 'Enhanced electromagnetic interference shielding through the use of functionalized carbon-nanotube-reactive polymer composites', IEEE Trans. Nanotechnol., 2010, 9, 464-469.
150. C. Xiang, Y. Pan, X. Liu, X. Sun, X. Shi and J. Guo: 'Microwave attenuation of multiwalled carbon nanotube-fused silica composites', Appl. Phys. Lett., 2005, 87, 123103.
151. S. Stankovich, D. A. Dikin, G. H. B. Dommett, K. M. Kohlhaas, E. J. Zimney, E. A. Stach, R. D. Piner, S. T. Nguyen and R. S. Ruoff: 'Graphene-based composite materials', Nature, 2006, 442, 282-286.
152. H. B. Zhang, W. G. Zheng, Q. Yan, Z. G. Jiang and Z. Z. Yu: 'The effect of surface chemistry of graphene on rheological and electrical properties of polymethylmethacrylate composites', Carbon, 2012, 50, 5117-5125.
153. 4-PyC composite ceramics', J. Mater. Sci. Technol, 2013, 29, 249-254.
154. X. Li, L. Zhang and X. Yin: 'Synthesis and electromagnetic shielding property of pyrolytic carbon-silicon nitride ceramics with dense silicon nitride', J. Am. Ceram. Soc, 2012, 95, 1038-1041.
155. 2 composite ceramics with multi-shell microstructure', J. Eur. Ceram. Soc, 2013, 33, 2173-2180.
156. Z. Shi, R. Fan, Z. Zhang, L. Qian, M. Gao, M. Zhang, L. Zheng, X. Zhang and L. Yin: 'Random composites of nickel networks supported by porous alumina toward double negative materials', Adv. Mater., 2012, 24, 2349-2352.
157. M. S. Cao, W. L. Song, Z. L. Hou, B. Wen and J. Yuan: 'The effects of temperature and frequency on the dielectric properties, electromagnetic interference shielding and microwave-absorption of short carbon fibre/silica composites', Carbon, 2010, 48, 788-796.
158. 2-embedded electrospun carbon fibres used for efficient electromagnetic interference shielding', J. Phys. Chem. Solids, 2011, 72, 1175-1179.
159. X. Yin, Y. Xue, L. Zhong and L. Cheng: 'Dielectric, electromagnetic absorption and interference shielding properties of porous yttria-stabilized zirconia/silicon carbide composites', Ceram. Intern., 2012, 38, 2421-2427.
160. H. Liu, H. Tian and H. Cheng: 'Dielectric properties of SiC fibrereinforced SiC matrix composites in the temperature range from 25 to 700°C at frequencies between 8.2 and 18 GHz', J. Nucl. Mater., 2013, 432, 57-60.
161. D. Ding, Y. Shi, Z. Wu, W. Zhou, F. Luo and J. Chen: 'Electromagnetic interference shielding and dielectric properties of SiCf/SiC composites containing pyrolytic carbon interphase', Carbon, 2013, 60, 552-555.
162. X. Liu, X. Yin, L. Kong, Q. Li, Y. Liu, W. Duan, L. Zhang and L. Cheng: 'Fabrication and electromagnetic interference shielding effectiveness of carbon nanotube reinforced carbon fibre/pyrolytic carbon composites', Carbon, 2014, 68, 501-510.
163. W. Song, M. Cao, M. Lu, J. Liu, J. Yuan and L. Fan: 'Improved dielectric properties and highly efficient and broadened bandwidth electromagnetic attenuation of thickness-decreased carbon nanosheet/wax composites', J. Mater. Chem. C, 2013, 1, 1846-1854.
164. M. Cao, J. Yang, W. Song, D. Zhang, B. Wen, H. Jin, Z. Hou and J. Yuan: 'Ferroferric Oxide/multiwalled carbon nanotube vs polyaniline/ferroferric oxide/multiwalled carbon nanotube multiheterostructures for highly effective microwave absorption', ACS Appl. Mater. Interfaces, 2012, 4, 6948-6955.
165. Y. Qing, W. Zhou, F. Luo and D. Zhu: 'Epoxy-silicone filled with multi-walled carbon nanotubes and carbonyl iron particles as a microwave absorber', Carbon, 2010, 48, 4074-4080.
166. 2 nanocomposites', Appl. Phys. Lett., 2007, 91, 203110.
167. D. Micheli, R. Pastore, G. Gradoni, V. M. Primiani, F. Moglie and M. Marchetti: 'Reduction of satellite electromagnetic scattering by carbon nanostructured multilayers', Acta Astronaut., 2013, 88, 61-73.
168. J. P. Calame, D. K. Abe, B. Levush and D. Lobas: 'Broadband complex dielectric permittivity of porous aluminum silicatepyrolytic carbon composites', J. Am. Ceram. Soc, 2005, 88, 2133-2142.
169. N. Quievy, P. Bollen, J. M. Thomassin, C. Detrembleur, T. Pardoen, C. Bailly and I. Huynen: 'Electromagnetic absorption properties of carbon nanotube nanocomposite foam filling honeycomb waveguide structures', IEEE Trans. Electromagn. Compat., 2012, 54, 43-51.
170. D. Micheli, R. Pastore, C. Apollo, M. Marchetti, G. Gradoni, V. M. Primiani and F. Moglie: 'Broadband electromagnetic absorbers using carbon nanostructure-based composites', IEEE Trans. Microwave Theory Tech., 2011, 59, 2633-2646.
171. S. L. Shi and J. Liang: 'Effect of multiwall carbon nanotubes on electrical and dielectric properties of yttria-stabilized zirconia ceramic', J. Am. Ceram. Soc, 2006, 89, 3533-3535.
172. 4/ZnO core/shell nanorods', J. Phys. Chem. C, 2010, 114, 9239-9244.
173. S. H. Liu, J. M. Liu and X. L. Dong: 'Electromagnetic interference shielding and microwave absorption materials'; 2007, Beijing, Chemical Industrial Press.
174. P. Bollen, N. Quie'vy, I. Huynen, C. Bailly, C. Detrembleur, J. M. Thomassin and T. Pardoen: 'Multifunctional architectured materials for electromagnetic absorption', Scr. Mater., 2013, 68, 50-54.
175. P. A. Miles, W. B. Westphal and A. Von Hippel: 'Dielectric spectroscopy of ferromagnetic semiconductors', Rev. Mod. Phys., 1957, 29, 279-307.
176. 4 nanograins', J. Phys. Chem. C, 2013, 117, 2135-2146.
177. P. Colombo: 'In praise of pores', Science, 2008, 322, 381-383.
178. M. L. Gary and S. J. Adam: 'Toward pore-free ceramics', Science, 2008, 322, 383-384.
179. H. Zhang, J. Zhang and H. Zhang: 'Electromagnetic properties of silicon carbide foams and their composites with silicon dioxide as matrix in X-band', Compos. Part A, 2007, 38, 602-608.
180. E. Tan, Y. Kagawa and A. F. Dericioglu: 'Electromagnetic wave absorption potential of SiC-based ceramic woven fabrics in the GHz range', J. Mater. Sci., 2009, 44, 1172-1179.
181. 4 bonded SiC ceramics with high strength', J. Eur. Ceram. Soc, 2013, 33, 2421-2427.
182. 3-SiC composites in the 1 MHz to 18 GHz frequency range', J. Mater. Res., 2007, 22, 3292-3302.
183. 4-SiC composite ceramic', J. Mater. Sci. Technol, 2012, 28, 745-750.
184. F. Ye, L. Liu and L. Huang: 'Fabrication and mechanical properties of carbon short fibre reinforced barium aluminosilicate glass-ceramic matrix composites', Comp. Sci. Technol, 2008, 68, 1710-1717.
185. W. Duan, X. Yin, Q. Li, X. Liu, L. Cheng and L. Zhang: 'Synthesis and microwave absorption properties of SiC nanowires reinforced SiOC ceramic', J. Eur. Ceram. Soc, 2014, 34, 257-266.
186. 4 composite ceramics', J. Am. Ceram. Soc, 2012, 95, 3158-3165.
187. 4 composite ceramics', J. Am. Ceram. Soc, 2013, 96, 2211-2217.
188. Y. Chen, Z. Lei, H. Wu, C. Zhu, P. Gao, Q. Ouyang, L. Qi and W. Qin: 'Electromagnetic absorption properties of graphene/Fe nanocomposites', Mater. Res. Bull, 2013, 48, 3362-3366.
189. H. L. Yu, T. S. Wang, B. Wen, M. M. Lu, Z. Xu, C. L. Zhu, Y. J. Chen, X. Y. Xue, C. W. Sun and M. S. Cao: 'Graphene/polyaniline nanorod arrays: synthesis and excellent electromagnetic absorption properties', J. Mater. Chem., 2012, 22, 21679-21685.
190. 4@Fe core@shell and ZnO nanoparticles: synthesis and excellent electromagnetic absorption properties', ACS Appl. Mater. Interfaces, 2012, 4, 6436-6442.
191. 4 nanohybrids: synthesis and excellent electromagnetic absorption properties', J. Appl. Phys., 2013, 113, 024314.
192. A. Mdarhri, F. Carmona, C. Brosseau and P. Delhaes: 'Direct current electrical and microwave properties of polymer-multiwalled carbon nanotubes composites', J. Appl. Phys., 2008, 103, 054303.
193. F. X. Qin, C. Brosseau and H. X. Peng: 'Microwave properties of carbon nanotubes/microwire/rubber multiscale hybrid composites', Chem. Phys. Lett., 2013, 579, 40-44.
194. 2 composites for improving microwave absorbing properties', Mater. Des., 2011, 32, 3013-3016.
195. 4 ceramics with gradient PyC distribution', J. Eur. Ceram. Soc, 2013, 33, 647-651.
196. D. Micheli, C. Apollo, R. Pastore and M. Marchetti: 'X-band microwave characterization of carbon-based nanocomposite material, absorption capability comparison and RAS design simulation', Compos. Sci. Technol, 2010, 70, 400-409.
197. D. Zhao, F. Luo and W. Zhou: 'Microwave absorbing property and complex permittivity of nano SiC particles doped with nitrogen', J. Alloys Compd., 2010, 490, 190-194.
198. W. J. Lee, J. W. Lee and C. G. Kim: 'Microwave absorbing structure with conducting polymer FSS coating', 16th International Conference on Composite Materials, 2007, Kyoto, Japan.
199. V. G. Veselago: 'The electrodynamics of substances with simultaneous negative values of ε and μ", Sov. Phys., 1968, 10, 509-515.
200. N. A. Khizhnyak: 'Artificial anisotropic dielectrics', J. Tech. Phys., 1956, 27, 2006-2037.
201. R. A. Silin: 'On the history of backward electromagnetic waves in metamaterials', Metamaterials, 2012, 6, 1-7.
202. R. A. Shelby, D. R. Smith and S. Schultz: 'Experimental verification of a negative index of refraction', Science, 2001, 292, 77-79.
203. N. I. Landy, S. Sajuyigbe, J. J. Mock, D. R. Smith and W. J. Padilla: 'Perfect metamaterial absorber', Phys. Rev. Lett., 2008, 100, 207402.
204. F. Qin and H. X. Peng: 'Ferromagnetic microwires enabled multifunctional composite materials', Prog. Mater. Sci., 2013, 58, 183-259.
205. Y. Bai, H. S. Chen, J. J. Zhang, Y. Luo, B. Li, L. X. Ran, J. A. Kong and J. Zhou: 'Left-handed material based on ferroelectric medium', Opt. Express, 2007, 15, 8284-8289.
206. Q. Zhao, B. Du, L. Kang, H. J. Zhao, Q. Xie, B. Li, X. Zhang, J. Zhou, L. T. Long and Y. G. Meng: 'Tunable negative permeability in an isotropic dielectric composite', Appl. Phys. Lett., 2008, 92, 051106.
207. 3 film at terahertz measured by metamaterials', J. Am. Ceram. Soc, 2012, 95, 1167-1169.
208. X. Zhao, M. Huang, B. Wang, J. Yin and C. Cao: 'Tunable microwave reflection behavior of electrorheological fluids', Smart. Mater. Struct., 2006, 15, 782-786.
209. L. Liu, L. B. Kong and S. Matitsine: 'Tunable effective permittivity of carbon nanotube composites', Appl. Phys. Lett., 2008, 93, 113106.
210. B. Wen, J. Yuan, Z. L. Hou, W. L. Song, L. Zhang, M. M. Lu, H. B. Jin, X. Y. Fang, W. Z. Wang and M. S. Cao: 'Temperature dependent microwave attenuation behavior for carbon-nanotube/silica composites', Carbon, 2013, 65, 124-139.
211. 2 reinforced with both multiwall carbon nanotubes and ZnO particles', Carbon, 2013, 64, 541-544.
212. X. Liu, X. Yin, G. Zheng, Y. Liu, L. Kong, Q. Li and X. Yuan: 'In-situ formation of carbon nanotubes in pyrolytic carbon-silicon nitride composite ceramics', Ceram. Intern., 2013, 40, 531-540.
213. G. Matthaei, E. M. T. Jones and L. Young: 'Microwave filters, impedance-matching networks, and coupling structures', 1-1096;1964, New York, McGraw-Hill.
214. Y. Danlee, I. Huynen, and C. Bailly: 'Smart multilayer frequencyselective absorber for microwave based on hybrid structure of polymer and carbon nanotubes', Proc. Polymer Processing Society 28th Annual Meeting, December 11-15, 2012, Pattaya (Thailand).
215. P. Colombo, G. Mera, R. Riedel and G. D. Soraru: 'Polymerderived ceramics: 40 years of research and innovation in advanced ceramics', J. Am. Ceram. Soc, 2010, 93, 1805-1837.
216. R. L. Bickerdike, A. R. G. Brown, G. Hughes and H. Ranson: 'The deposition of pyrolytic carbon in the pores of bonded and unbonded carbon powders', in 'Proc. Fifth Cod. Carbon', (eds. S. Mrosowski, M. C. Studebaker, and P. L. Walker), Vol. I, 575-583; 1962, New York, Pergamon Press.
217. W. C. Jenkin: 'Method of depositing metals and metallic compounds throughout the pores of a porous body', US Patent, 3, 160, 517, Dec. 8, 1964.
218. R. Naslain and F. Langlais: 'Fundamental and practical aspects of the chemical vapor infiltration of porous substrates', High Temp. Sci., 1990, 27, 221-235.
219. 2 precursor', J Phys IV France, 1993, 3, 527-533.
220. D. Lespiaux, F. Langlais, R. Naslain, S. Schamm and J. Sevely: 'Chlorine and oxygen inhibition effects in the deposition of SiC-based ceramics from the Si-C-H-Cl system', J. Eur. Ceram. Soc, 1995, 15, 81-88.
221. G. Mera, A. Navrotsky, S. Sen, H. Kleebe and R. Riedel: 'Polymer-derived SiCN and SiOC ceramics - structure and energetics at the nanoscale', J. Mater. Chem. A., 2013, 1, 3826-3836.
222. Y. Gao, G. Mera, H. Nguyen, K. Morita, H. Kleebe and R. Riedel: 'Processing route dramatically influencing the nanostructure of carbon-rich SiCN and SiBCN polymer-derived ceramics. Part I: low temperature thermal transformation', J. Eur. Ceram. Soc, 2012, 32, 1857-1866.
223. S. Widgeon, G. Mera, Y. Gao, E. Stoyanov, S. Sen, A. Navrotsky and R. Riedel: 'Nanostructure and energetics of carbon-Rich SiCN ceramics derived from polysilylcarbodiimides: role of the nanodomain interfaces', Chem. Mater., 2012, 24, 1181-1191.
224. G. Mera, R. Riedel, F. Poli and K. Mueller: 'Carbon-rich SiCN ceramics derived from phenyl-containing poly (silylcarbodiimides) ', J. Eur. Ceram. Soc, 2009, 29, 2873-2883.
225. D. Galusek, S. Reschke, R. Riedel, W. Dressler, P. Sajgalik, Z. Lencees and J. Majling: 'In-situ carbon content adjustment in polysilazane derived amorphous SiCN bulk ceramics', J. Eur. Ceram. Soc, 1999, 19, 1911-1921.
226. Q. Li, X. Yin, W. Duan, L. Kong, B. Hao and F. Ye: 'Electrical, dielectric and microwave-absorption properties of polymer derived SiC ceramics in X band', J. Alloys Compd., 2013, 565, 66-72.
227. F. Ye, L. Zhang, X. Yin, Y. Zhang, L. Kong, Q. Li, Y. Liu and L. Cheng: 'Dielectric and EMW absorbing properties of PDCs-SiBCN annealed at different temperatures', J. Eur. Ceram. Soc, 2013, 33, 1469-1477.
228. S. Guruvenket, S. Andrie, M. Simon, K. W. Johnson and R. A. Sailer: 'Atmospheric-pressure plasma-enhanced chemical vapor deposition of a-SiCN: H films: role of precursors on the film growth and properties', ACS Appl. Mater. Interfaces, 2012, 4, 5293-5299.
229. 2/Ar/hexamethyldisilazane microwave plasma', Thin Solid Films, 2011, 520, 245-250.
230. A. M. Wrobel, I. Blaszczyk-Lezak, P. Uznanski and B. Glebocki: 'Silicon carbonitride (SiCN) films by remote hydrogen microwave plasma CVD from tris (dimethylamino) silane as novel singlesource precursor', Chem. Vap. Deposition, 2010, 16, 211-215.
231. B. P. Swain and N. M. Hwang: 'Study of structural and electronic environments of hydrogenated amorphous silicon carbonitride (a-SiCN: H) films deposited by hot wire chemical vapor deposition', Appl. Surf. Sci, 2008, 254, 5319-5322.
232. W. J. Cheng, J. C. Jiang, Y. Zhang, H. S. Zhu and D. Z. Shen: 'Effect of the deposition conditions on the morphology and bonding structure of SiCN films', Mater. Chem. Phys., 2004, 85, 370-376.
233. D. M. Bhusari, C. K. Chen, K. H. Chen, T. J. Chuang, L. C. Chen and M. C. Lin: 'Composition of SiCN crystals consisting of a predominantly carbon-nitride network', J. Mater. Res., 1997, 12, 322-325.
234. L. C. Chen, K. H. Chen, S. L. Wei, P. D. Kichambare, J. J. Wu, T. R. Lu and C. T. Kuo: 'Crystalline SiCN: a hard material rivals to cubic BN', Thin Solid Films, 1999, 355, 112-116.
235. 2-Ar mixture gases', J. Am. Ceram. Soc, 2013, 96, 979-986.
236. P. Colombo, T. Gambaryan-Roisman, M. Scheffler, P. Buhler and P. Greil: 'Conductive ceramic foams from preceramic polymers', J. Am. Ceram. Soc, 2001, 84, 2265-2268.
237. P. Greil: 'Biomorphous ceramics from lignocellulosics', J. Eur. Ceram. Soc, 2001, 21, 105-118.
238. M. Scheffler and P. Greil: 'Polymer derived ceramics: novel materials with a wide range of potential applications', Adv. Eng. Mater., 2002, 4, 831.
239. P. Greil: 'Polymer derived engineering ceramics', Adv. Eng. Mater., 2000, 2, 339-348.
240. P. Greil: 'Active-filler controlled pyrolysis of preceramic polymers', J. Am. Ceram. Soc, 1995, 78, 835-848.
241. P. Greil and M. Seibold: 'Modelling of dimensional changes during polymer-ceramic conversion for bulk component fabrication', J. Mater. Sci, 1992, 27, 1053-1060.
242. N. Travitzky, H. Windsheimer, T. Fey and P. Greil: 'Preceramic paper-derived ceramics', J. Am. Ceram. Soc, 2008, 91, 3477-3492.
243. H. Windsheimer, N. Travitzky, A. Hofenauer and P. Greil: 'Laminated object manufacturing of preceramic-paper-derived Si-SiC composites', Adv. Mater., 2007, 19, 4515.
244. R. Naslain: 'Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview', Compos. Sci. Technol, 2004, 64, 155-170.
245. G. L. Vignoles, C. Gaborieau, S. Delettrez, G. Chollon and F. Langlais: 'Reinforced carbon foams prepared by chemical vapor infiltration: a process modeling approach', Surf. Coat. Technol., 2008, 203, 510-515.
246. Y. Liu, L. Cheng, L. Zhang, Y. Hua and W. Yang: 'Microstructure and properties of particle reinforced silicon carbide and silicon nitride ceramic matrix composites prepared by chemical vapor infiltration', Mater. Sci. Eng. A, 2008, 475, 217-223.
247. D. Jaglin, J. Binner, B. Vaidhyanathan, C. Prentice, B. Shatwell and D. Grant: 'Microwave heated chemical vapor infiltration: densification mechanism of SiCf/SiC composites', J. Am. Ceram. Soc, 2006, 89, 2710-2717.
248. D. A. Streitwieser, N. Popovska and H. Gerhard: 'Optimization of the ceramization process for the production of three-dimensional biomorphic porous SiC ceramics by chemical vapor infiltration (CVI) ', J. Eur. Ceram. Soc, 2006, 26, 2381-2387.
249. H. J. Li, A. J. Li, R. C. Bai and K. Z. Li: 'Numerical simulation of chemical vapor infiltration of propylene into C/C composites with reduced multi-step kinetic models', Carbon, 2005, 43, 2937-2950.
250. S. F. Tang, J. Y. Deng, H. F. Du, W. C. Liu and K. Yang: 'Fabrication and microstructure of C/SiC composites using a novel heaterless chemical vapor infiltration technique', J. Am. Ceram. Soc, 2005, 88, 3253-3255.
251. W. Yang, H. Araki, A. Kohyama, S. Thaveethavorn, H. Suzuki and T. Noda: 'Fabrication in-situ SiC nanowires/SiC matrix composite by chemical vapour infiltration process', Mater. Lett., 2004, 58, 3145-3148.
252. K. Guan, L. Cheng, Q. Zeng, L. Zhang, J. Deng, K. Li and H. Li: 'Modeling of pore structure evolution between bundles of plain woven fabrics during chemical vapor infiltration process: the influence of preform geometry', J. Am. Ceram. Soc, 2013, 96, 51-61.
253. Y. D. Xu, L. T. Zhang, L. F. Cheng and D. T. Yan: 'Microstructure and mechanical properties of three-dimensional carbon/silicon carbide composites fabricated by chemical vapor infiltration', Carbon, 1998, 36, 1051-1056.
254. C. A. Pickles: 'Microwaves in extractive metallurgy: part 1-Review of fundamentals', Miner. Eng., 2009, 22, 1102-1111.
255. D. V. Thorre, M. Catto and S. Aaron: 'System and method using a microwave-transparent reaction chamber for production of fuel from a carbon-containing feedstock', Patent US20110036706, 2011.
256. K. N. Tousif: 'Variation of electrical characteristics of EMI shielding materials coated with ceramic microspheres', Intern. J. Sci. Eng. Technol., 2012, 1, 185-188.
257. J. P. Calame and D. K. Abe: 'Applications of advanced materials technologies to vacuum electronic devices', Proc IEEE, 1999, 87, 840-864.
258. M. I. Petelin: 'Mode selection in high power microwave sources', IEEE Trans. Electron Dev., 2001, 48, 129-133.
259. J. P. Calame and W. Lawson: 'A modified method for producing carbon loaded vacuum vompatible microwave absorbers from a porous ceramic', IEEE Trans. Electron Devices, 1991, 38, 1538-1545.
260. S. Sakanaka, F. Hinode, K. Kubo and J. Urakawa: 'Construction of 714 MHz hOM-free accelerating cavities', J. Synchrotron Rad., 1998, 5, 386-388.