Applications of advanced materials technologies to vacuum electronic devices

Proceedings of the IEEE

Volumn 87, Issue 5, 1999, Pages 840-864

  Calame, J P ^a   Abe, D K ^a  

^a NAVAL RESEARCH LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CERAMIC MATERIALS; DIELECTRIC MATERIALS; ELECTRON GUNS; MATERIALS SCIENCE;

VACUUM ELECTRONIC DEVICES;

ELECTRON TUBES;

EID: 0032627447     PISSN: 00189219     EISSN: None     Source Type: Journal    
DOI: 10.1109/5.757257     Document Type: Article

References (85)

1. A. V. Gaponov-Grekhov and V. L. Granatstein, Eds. Applications of High Power Microwaves, Norwood, MA: Artech House, p. 5, 1994.
2. R. S. Symons,Tubes: Still vital after all these years,IEEE Spectrum, vol. 35, pp. 52-63, Apr. 1998.
3. Typical Power Tube CW Power and Frequency Capabilities (manufacturer's data), Communications and Power Industries, Inc., Traveling Wave Tube Products Division, Palo Alto, CA, 1998.
4. R. K. Parker, private communication.
5. J. E. Field, The Properties of Natural and Synthetic Diamond. London, UK: Academic Press, 1992, ch. 12.
6. J. A. King, Materials Handbook for Hybrid Microelectronics. Dedham, MA: Artech House, 1988, pp. 490-505.
7. P. K. Bachmann,Microwave plasma chemical vapor deposition of diamond,in Handbook of Industrial Diamonds and Diamond Films, M. A. Prelas, G. Popovici, and L. K. Bigelow. Eds. New York: Marcel Dekker, Inc., 1998, ch. 21, pp. 821-850.
8. R. Heidinger, R. Schwab, R. Sporl, and M. Thumm,Dielectric loss measurements in CVD diamond windows for gyrotrons,in Conf. Dig. 22nd Int. Conf. Infrared and Millimeter Wares, 1997, pp. 142-143.
9. C. A. Klein,CVD diamond for optics applications in high heat flux environments,in W/c/i Heat Fltix Engineering III, Proc. SPIE 2855, 1996, pp. 34-52.
10. R. S. Symons,Sealed waveguide window,U.S. Patent 2958834.
11. A. Staprans, E. W. McCune, and J. A. Ruetz,High power linear beam tubes,Proc. IEEE, vol. 61, pp. 299-330, Mar. 1973.
12. D. S. Oison, G. J. Reynolds, G. F. Virshup, F. I. Friedlander, B. G. James, and L. D. Partain,Tensile strength of synthetic chemical vapor deposited diamond,J. Appl. Phys., vol. 78, pp. 5177-5179, Oct. 1995.
13. W. C. Young, Roark's Formulas for Stress and Strain. New York: McGraw-Hill, 1989, pp. 392-442.
14. O. Branz, M. Thumm, A. Kasugai, K. Sakamoto, K. Takahashi, M. Tsuneoka, and T. Imai,High power millimeter wave transmission through CVD diamond,in Conf. Dig. 22nd Int. Conf. Infrared and Millimeter Waves, 1997, pp. 144-145.
15. K. Felch, M. Blank, P. Borchard, T. S. Chu, J. Feinstein, H. R. Jory, J. A. Lorbeck, C. M. Loring, Y. M. Mizuhara, J. M. Neilson, R. Schumacher, and R. J. Temkin,Long pulse and CW tests of a 100 GHz gyrotron with an internal, quasi optical converter,IEEE Trans. Plasma Sei., vol. 24, pp. 558-569, June 1996.
16. R. E. Collin, Foundations for Microwave Engineering. New York: McGraw-Hill, 1992, pp. 194-198.
17. W. C. Young, Roark's Formulas for Stress and Strain. New York: McGraw-Hill, 1989, pp. 720-726.
18. T. Shimozuma, S. Morimoto, M. Sato, Y. Takita, S. Ito, S. Kubo, H. Idei, K. Ohkubo, and T. Watari,A forced gas cooled single disk window for high power CVV millimeter waves,in Conf. Dig. 22nd Int. Conf. Infrared and Millimeter Waves, 1997, pp. 146-147.
19. B. James, private communication.
20. O. Sauseng, A. E. Manoly, A. Hall, and J. R. Mente,Thermal properties and power capability of helix structures for millimeter waves,in IEEE Int. Electron Devices Meeting (IEDM) Tech. Dig., 1978, pp. 534-537.
21. A. S. Gilmour, Jr., Principles of Traveling Wave Tubes. Boston, MA: Artech House, 1994, pp. 337-345.
22. R. Harper and M. P. Puri,Heat transfer and power capabilities of helix TWTs,in IEEE Int. Electron Devices Meet. (IEDM) Tech. Dig., 1986, pp. 498-500.
23. J. E. Parrot and A. D. Stuckes, Thermal Conductivity of Solids. London, U.K.: Pion Limited, 1975, pp. 127-128.
24. E. K. Sichel and R. E. Miller,Thermal conductivity of highly ordered pyrolytic boron nitride,in Thermal Conductivity 14, P. G. Klemens and T. K. Chu, Eds. New York: Plenum Press, 1976, pp. 11-17.
25. S. Wartski, B. Henry, and N. Santonja,Development of a brazed helix TWT for future Ka-band earth stations delivering 200 W in the band 27.5-30 GHz,in IEEE Int. Electron Devices Meeting (IEDM) Tech. Dig., 1988, pp. 366-369.
26. R. N. Tamashiro and S. L. Aldana,60 percent efficient K-band TWT using new diamond rod technology,in IEEE Int. Electron Devices Meeting (IEDM) Tech. Dig., 1989, pp. 187-190.
27. C. E. Hobrecht,Resonant loss for helix traveling wave tubes,in IEEE Int. Electron Devices Meet. (IEDM) Tech. Dig., 1977, pp. 348-350.
28. S. P. Morgan and J. A. Young,Helix waveguide,Bell Syst. Tech. J., vol. 35, pp. 1347-1384, Nov. 1956.
29. V. A. Flyagin, A. V. Gaponov, M. I. Petelin, and V. K. Yulpatov,The gyrotron,IEEE Trans. Microwave Theory Tech., vol. 25, pp. 514-521, June 1977.
30. S. G. Tantawi, W. T. Main, P. E. Latham, G. S. Nusinovich, W. Lawson, C. D. Striffler, and V. L. Granatstein,High power X-band amplification from an overmoded three cavity gyroklystron with a tunable penultimate cavity,IEEE Trans. Plasma Sei., vol. 20, pp. 205-215, June 1992.
31. K. R. Chu, V. L. Granatstein, P. E. Latham, W. Lawson, and C. D. Striffler,A 30 MW gyroklystron amplifier design for high energy linear accelerators,IEEE Trans. Plasma Sei., vol. 13, pp. 424-434, June 1985.
32. H. W. Matthews, W. Lawson, J. P. Calame, M. K. E. Flaherty, B. Hogan, J. Cheng, and P. E. Latham,Experimental studies of stability and amplification in a two cavity second harmonic gyroklystron,IEEE Trans. Plasma Sei., vol. 22, pp. 825-833, Oct. 1994.
33. J. P. Calame, W. Lawson, J. Cheng, B. Hogan, P. E. Latham, M. Castle, V. L. Granatstein, and M. Reiser,100 MW gyroklystron development for linear collider applications,in Pulsed KF Sources for Linear Colliders, AIP Conf. Proc. 337, 1995, pp. 195-199.
34. W. Main, S. Tantawi, and J. Hamilton,Measurement of the dielectric constant of lossy ceramics,Int. J. Electron., vol. 72, pp. 499-505, Mar. 1992.
35. W. J. Choyke and G. Pensl,Physical properties of SiC,MRS Bulletin, vol. 22, pp. 25-29, Mar. 1997.
36. J. P. Calame and W. Lawson,A modified method for producing carbon loaded vacuum compatible microwave absorbers from a porous ceramic,IEEE Trans. Electron Devices, vol. 38, pp. 1538-1545, June 1991.
37. L. C. Thomas, Heat Transfer-Professional Version. Englewood Cliffs, NJ: Prentice-Hall, 1993, ch. 6-8.
38. F. M. White, Heat and Mass Transfer. Reading, MA: Addison-Wesley, 1988, ch. 5-6.
39. .B. S. Petukov and V. V. Kirillov,Heat exchange for turbulent flow of liquid in tubes,Teploenerg., vol. 5, pp. 63-68, 1958.
40. W. M. Rohsenow,A method of correlating heat transfer data for surface boiling liquids,Trans. ASME, vol. 74, p. 969, Nov. 1952.
41. L. C. Thomas, Heat Transfer-Professional Version, Edge wood Cliffs, NJ: Prentice-Hall, 1993, ch. 10.
42. F. M. White, Heat and Mass Transfer, Reading, MA: AddisonWesley, 1988, p. 562.
43. S. van Stralen and R. Cole, Boiling Phenomena. New York: McGraw-Hill Hemisphere, 1979.
44. T. Simon and P. S. Wu,Flow boiling critical heat flux on small heated regions,in High Heal Flux Engineering II, Proc. SP1E, 1993, vol. 1997, pp. 2-15.
45. V. E. Zapevalov, V. V. Alikaev, G. G. Denisov, V. A. Flyagin, A. Sh. Fix, A. N. Kuftin, V. I. Kurbatov, and V. E. Myasnikov,Development of 1 MW output power level gyrotron for ITER,in Conf. Dig. 22nd Int. Conf. Infrared and Millimeter Waves, 1997, pp. 108-109.
46. B. Leslie, A. Neukermans, T. Simon, and J. Foster,Enhanced brightness x-ray source,J. Vacuum Sei. Tech. B., vol. 1, pp. 1251-1256, Oct. 1983.
47. J. H. Rosenfeld and M. T. North,Porous media heat exchangers for cooling of high power optical components,Opt. Eng., vol. 34, pp. 335-341, Feb. 1995.
48. J. H. Rosenfeld,Nucleate boiling heat transfer in porous wick structures,in Heat Transfer Equipment Fundamentals, Design, Application, and Operating Problems, Proc. ASME HTD, vol. 108, pp. 47-55, 1989.
49. J. H. Rosenfeld, R. Schumacher, R. D. Watson, and J. M. McDonald,Test results from a pumped single phase porous metal heat exchanger,in High Heat Flux Engineering II, Proc. SPIE, 1993, vol. 1997, pp. 53-64.
50. K. K. Kar and A. Dybbs,Internal heat transfer coefficients of porous media,in Heat Transfer in Porous Media, ASME HTD, vol. 22, pp. 81-91, 1982.
51. V. E. Zapevalov, A. P. Keyer, V. E. Myosknifcov, S. A. Madiegan, and V. A. Flyagin,Development of high powered gyrotrons at 140 GHz(in Russian), Microwave Tube J., vol. 6, p. 71, June 1991.
52. R. E. DeHoff, G. A. Meyer, IV, J. E. Toth, and P. Cologer,TWT thermal management using two phase heat transfer,product literature, Thermacore, Inc., Lancaster, PA, 1997.
53. W. H. Smith and D. H. Leeds,Pyrolytic graphite,in Modern Materials: Advances in Development and Applications, vol. 7, B. W. Gonser, Ed. New York: Academic, 1970, pp. 139-221.
54. E. I. Shobert, II,Carbon and graphite,in Modern Materials: Advances in Development and Applications, vol. 4, B. \V. Gonser, Ed. New York: Academic, 1964, pp. 1-99.
55. A. N. Curren,Carbon and carbon coated electrodes for multistage depressed collectors for electron beam devices-A technology review,IEEE Trans. Electron Devices, vol. 33, pp. 1902-1914, Nov. 1986.
56. H. G. Kosmahl,Modern multistage depressed collectors-A review,Proc. IEEE, vol. 70, pp. T325-1334, Nov. 1982.
57. A. N. Curren and T. A. Fox,Traveling wave tube efficiency improvement with textured pyrolytic graphite multistage depressed collector electrodes,IEEE Electron Device Lett., vol. 2, pp. 252-254, Oct. 1981.
58. E. G. Wintucky, A. N. Curren, and J. S. Sovey,Electron reflection and secondary emission characteristics of sputtertextured pyrolytic graphite surfaces,Thin Solid Films, vol. 84, pp. 161-169, Oct. 1981.
59. P. Ramins and B. T. Ebihara,Improvements in MDC and TWT overall efficiency through the application of carbon electrode surfaces,IEEE Trans. Electron Devices, vol. 33, pp. 1915-1924, Nov. 1986.
60. R. N. Tamashiro, T. G. Teng, and D. A. Cordey,Pyrolytic graphite multistage depressed collector for a 20 GHz TWT,NASA CR-174780, 1984.
61. Satellite TWT's,Thomson CSF, Brochure APH 6284, 1983.
62. T. F. Fleming and W. C. Riley,Applications for ultra-high thermal conductivity graphite fibers,in High Heat Flux Engineering II, Proc. SPIE, 1993, vol. 1997, pp. 136-147.
63. M. L. Lake and J. M. Ting,VGCF/Carbon composites for plasma facing materials,in High Heat Flux Engineering II, Proc. SPIE, 1993, vol. 1997, pp. 196-205.
64. G. P. Sutton, Rocket Propulsion Elements. New York: Wiley, 1992, pp. 105-110.
65. D. H. Preist and M. B. Shrader,The klystrode-An unusual transmitting tube with potential for UHF-TV,Proc. IEEE, vol. 70, pp. 1318-1325, Nov. 1982.
66. E. G. Zaidman and M. A. Kodis,Emission gated device issues,IEEE Trans. Electron Devices, vol. 38, pp. 2221-2228, Oct. 1991.
67. J. T. Mark and S. G. McNees,New high efficiency 500 kW tetrodes for short wave broadcast,IEEE Trans. Broadcasting, vol. 34, pp. 141-146, June 1988.
68. A. S. Gilmour, Jr.,RF tubes for space-based accelerators,IEEE Trans. Electron Devices, vol. 38, pp. 2190-2204, Oct. 1991.
69. R. J. Parker, Advances in Permanent magnetism. New York: Wiley, 1990.
70. K. J. Strnat,Permanent magnets based on 4f-3d compounds,IEEE Trans. Magnetics, vol. 23, pp. 2094-2099, Sept. 1987.
71. [71 ] Magnet Sales & Manufacturing, Culver City, CA, product literature. [Online.] Available WWW: http://www.ma2netsales.com, 1997.
72. P. Campbell, Permanent Magnet Materials and the Application. New York: Cambridge Univ. Press, 1994.
73. J. F. Gittins, Power Travelling-Wave Tubes. New York: American Elsevier, 1965.
74. H. A. Leupold and J. P. Clarke,Bulk reduction and field enhancement in periodic permanent-magnet structures,IEEE Trans. Electron Devices, vol. 34, pp. 1868-1872, Aug. 1987.
75. H. A. Leupold, E. Potenziani, II, and A. S. Tilak,Iron-free permanent magnet structures for traveling-wave tubes,in IEEE Int. Electron Devices Meeting (IEDM) Tech. Dig., 1991, pp. 411-414.
76. H. A. Leupold, E. Potenziani, II, and A. Tauber,Lightweight permanent magnet stack for traveling-wave tubes,J. Appl. Phys., vol. 67, pp. 4656-4658, May 1990.
77. J. P. Clarke and H. A. Leupold,Shaping of cylindrically symmetric magnetic fields with permanent magnets,IEEE Trans. Magnetics, vol. 22, pp. 1063-1065, Sept. 1986.
78. E. Potenziani, II, and H. A. Leupold,Permanent magnets for magnetic resonance imaging,IEEE Trans. Magnetics, vol. 22, pp. 1078-1080, Sept. 1986.
79. H. A. Leupold and E. Potenziani, II,A permanent magnet circuit design primer,Army Research Lab. Tech. Rep. ARLTR-946, July 1996.
80. . [80] H. A. Leupold, E. Potenziani, II, D. P. Myers, and D. S. Furuno,A novel permanent magnet electron beam guide,Army Research Lab. Tech. Rep. ARL-TR-427, Nov. 1995.
81. D. S. Furuno, D. P. Myers, K. T. Lancaster, H. A. Leupold, E. Potenziani, II, A. Nanji, and G. K. Sakadane,Application of theKlevafellapermanent magnet focusing system to linear beam microwave tubes,in IEEE Int. Electron Devices Meeting (IEDM) Tech. Dig., 1995, pp. 211-214.
82. H. A. Leupold and E. Potenziani, II,Novel high field permanent-magnet flux sources,'' IEEE Trans. Magnetics, vol. 23, pp. 3628-3629, Sept. 1987.
83. H. A. Leupold, A. S. Tilak, and E. Potenziani II,Multi-tesla permanent magnet field sources,J. Appl. Phys., vol. 73, pp. 6861-6863, May 1993.
84. H. A. Leupold and G. F. McLane,Fabrication of multipolar magnetic field sources,J. Appl. Phys., vol. 76, pp. 6253-6255, Nov. 1994.
85. H. A. Leupold, A. Tilak, and E. Potcnziani II,Doubly augmented macic spheres,IEEE Trans. Magnetics, vol. 32, pp. 5079-508 l,~Sept. 1996.