Polymer Processing of Ceramics

Ceramics and Composites Processing Methods

Volumn , Issue , 2012, Pages 235-270

  Ionescu, Emanuel ^a   Riedel, Ralf ^a  

^a DARMSTADT UNIVERSITY OF TECHNOLOGY   (Germany)

Author keywords

PDCs processing, similar to thermoplastic in obtaining 3 D shapes; Polymer processing of ceramics, microfabrication of PDC, for MEMS; Preceramic, in PDC based, substrate protection from thermal loading

Indexed keywords

EID: 84879842396     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9781118176665.ch7     Document Type: Chapter

References (215)

1. P. Colombo, G. Mera, R. Riedel, and G. D. Soraru (2010) Polymer -derived ceramics: 40 years of research and innovation in advanced ceramics, J. Am. Ceram. Soc., 93 [7] 1805 -1837.
2. R. Raj, R. Riedel, and G. D. Soraru (eds.) (2001) Special issue on ultrahigh -temperature polymer derived ceramics, J. Am. Ceram. Soc., 84 [10] 2158 -2456.
3. F. Babonneau, P. Miele, R. Riedel, and G. D. Soraru (eds.) (2005) Special issue on polymer derived ceramics, J. Eur. Ceram. Soc., 25 89 -291.
4. R. Riedel and E. Ionescu (eds.) (2006) Special triple issue on preceramic polymers, Soft Mater., 4 [1 -3] 105 -299.
5. R. Riedel (1995) From molecules to materials -A novel route for the synthesis of advanced ceramics, Naturwissenschaften, 82 12 -20.
6. J. Bill and F. Aldinger (1995) Precursor -derived covalent ceramics, Adv. Mater., 7 775 -787.
7. P. Greil (2000) Polymer derived engineering ceramics, Adv. Eng. Mater., 2 339.
8. R. Riedel, G. Mera, R. Hauser and A. Klonczynski (2006) Silicon -based polymer -derived ceramics: Synthesis, properties and applications -A review, J. Ceram. Soc. Jpn., 114 425 -444.
9. J. Bill, F. Wakai, and F. Aldinger (eds.), Precursor -Derived Ceramics. Wiley -VCH, Weinheim, 1999.
10. Colombo P. Colombo, R. Riedel, G. D. Soraru, and H. -J. Kleebe (eds.), Polymer Derived Ceramics. From Nano -Structure to Applications. DeSTech Publications, Lancaster, PA, 2009.
11. E. Ionescu, Polymer derived ceramics, in Ceramics Science and Technologies, Vol. 3, eds. R. Riedel and I. -W. Chen, Wiley -VCH, Weinheim, 2012, 457 -500.
12. M. Birot, J. P. Pillot, and J. Dunogues (1995) Silicon -based polymer -derived ceramics: Synthesis, properties and applications -A review, Chem. Rev., 95 1443 -1477.
13. E. Kroke, Y. Li, C. Konetschny, E. Lecomte, C. Fasel, and R. Riedel (2000) Silazane derived ceramics and related materials, Mater. Sci. Eng. R, 26 97 -199.
14. R. Riedel, E. Kroke, A. Greiner, A. O. Gabriel, L. Ruwisch, and J. Nicolich (1998) Inorganic solid -state chemistry with main group element carbodiimides, Chem. Mater., 10 [10] 2964 -2979.
15. F. Babonneau, K. Thorne, and J. D. Mackenzie (1989) Dimethyldiethoxysilane/ tetraethoxysilane copolymers: Precursors for the silicon -carbon -oxygen system, C hem. Mater., 1 554.
16. G. D. Soraru (1994) Silicon oxycarbide glasses from gels, J. Sol -Gel Sci. Technol., 2 843 -848.
17. C. G. Pantano, A. K. Singh, and H. X. Zhang (1999) Silicon oxycarbide glasses, J. Sol -Gel Sci. Technol., 14 7 -25.
18. S. Walter, G. D. Soraru, H. Brequel, and S. Enzo (2002) Microstructural and mechanical characterization of sol gel -derived Si -O -C glasses, J. Eur. Ceram. Soc., 22 2389 -2400.
19. A. O. Gabriel and R. Riedel (1997) Preparation of non -oxidic silicon ceramics by an anhydrous sol -gel process, A ngew. Chem. Int. Ed., 36 384 -386.
20. A. O. Gabriel, R. Riedel, S. Storck, and W. F. Maier (1997) Synthesis and thermally induced ceramization of a non -oxidic poly(methylsilsesquicarbodi -imide) gel, Appl. Organomet. Chem., 11 833 -841.
21. E. Kroke, K. W. Völger, A. Klonczynski, and R. Riedel (2001) A sol -gel route to B 4 C, Angew. Chem. Int. Ed., 40 1698 -1700.
22. K. W. Völger, E. Kroke, C. Gervais, T. Saito, F. Babonneau, R. Riedel, Y. Iwamoto, and T. Hirayama (2003) B/C/N materials and B 4 C synthesized by a non -oxide sol -gel process, Chem. Mater., 15 755 -764.
23. Balan C. and Riedel R. (2006) Rheological investigations of a polymeric precursor for ceramic materials: experiments and theoretical modeling, J. Optoelec. Adv. Mater. 8 561.
24. S. Yajima, Y. Hasegawa, J. Hayashi, and M. Iimura (1978) Synthesis of continuous silicon carbide fi bre with high tensile strength and high young ' s modulus, J. Mater. Sci., 13 2569 -2576.
25. R. M. Laine and F. Babonneau (1993) Preceramic polymers routes to silicon carbide, Chem. Mater., 5 260 -279.
26. K. Okamura (1987) Ceramic fi bres from polymer precursors, Composites, 18 107 -120.
27. H. Sakurai, R. Koh, A. Hosomi, and M. Kumada (1966) The pyrolysis of organodisilanes, Bull. Chem. Soc. Jpn., 39 2050 -2051.
28. K. Shina and M. Kumada (1958) Thermal rearrangement of hexamethyldisilane to trimethyl(dimethylsilylmethyl) -silane, J. Org. Chem., 23 139 -140.
29. H. Sakurai, A. Hosomi, and M. Kumada (1968) Thermolysis of hexamethyldisilane, Chem. Commun., 930.
30. Y. Hasegawa, M. Iimura, and S. Yajima (1980) Synthesis of continuous silicon carbide fi bre, J. Mater. Sci., 15 720 -728.
31. H. Ichikawa, F. Machino, S. Mitsuno, T. Ishikawa, K. Okamura, and Y. Hasegawa (1986) Synthesis of continuous silicon carbide fi bre. Part 5. Factors affecting stability of polycarbosilane to oxidation, J. Mater. Sci., 21 4352 -4358.
32. Y. Hasegawa (1988) Synthesis of continuous silicon carbide fi bre. Part 6. Pyrolysis process of cured polycarbosilane fi bre and structure of SiC fi bre, J. Mater. Sci., 24 1177 -1190.
33. T. Taki, S. Maeda, K. Okamura, M. Sato, and T. Matsuzawa (1987) Oxidation curing mechanism of polycarbosilane fi bres by solid -state 29 Si high -resolution NMR, J. Mater. Sci. Lett., 6 826 -828.
34. Y. Hasegawa and K. Okamura (1983) Synthesis of continuous silicon carbide fi bre, J. Mater. Sci., 18 3633 -3648.
35. G. D. Soraru, F. Babonneau, and J. Mackenzie (1990) 29 Si MAS -NMR investigation of the conversion process of a polytitanocarbosilane into SiC -TiC ceramics, J. Mater. Sci., 5 3664 -3670.
36. M. L. Dunham, D. L. Bailey, and R. Mixer R. (1957) New curing system for silicon rubber, Ind. Eng. Chem., 49 1373 -1376.
37. E. M. Valles and Ch. M. Macosco (1979) Properties of networks formed by end linking of poly(dimethylsiloxane), M acromolecules, 12 673 -679.
38. M. Heidingsfeldova and M. Capka M. (1985) Rhodium complexes as catalysts for hydrosilylation crosslinking of silicone rubber, J. Appl. Polym. Sci., 30 1837 -1846.
39. R. Harshe, C. Balan, and R. Riedel (2004) Amorphous Si(Al)OC ceramic from polysiloxanes: Bulk ceramic processing, crystallization behavior and applications, J. Eur. Ceram. Soc., 24 [12] 3471 -3482.
40. N. S. Choong Kwet Yive, R. J. P. Corriu, D. Leclerq, P. H. Mutin, and A. Vioux (1992) Silicon carbonitride from polymeric precursors: Thermal cross -linking and pyrolysis of oligosilazane model compounds, Chem. Mater., 4 141 -146.
41. A. Lavendrine, D. Bahloul, P. Goursat, N. S. Choong Kwet Yive, R. J. P. Corriu, D. Leclerq, P. H. Mutin, and A. Vioux (1991) Pyrolysis of polyvinylsilazane precursors to silicon carbonitride, J. Eur. Ceram. Soc., 8 221 -227.
42. G. D. Soraru, F. Babonneau, and J. D. Mackenzie (1990) 29 Si MAS -NMR investigation of the conversion process of a polytitanocarbosilane into SiC -TiC ceramics, J. Mater. Sci., 25 3664 -3670.
43. G. D. Soraru, F. Babonneau, and J. D. Mackenzie (1988) Structural concepts on new amorphous covalent solids, J. Non -Cryst. Solids, 106 256 -261.
44. M. Monthioux, A. Oberlin, and E. Bouillon (1990) Relationship between microtexture and electrical properties during heat treatment of SiC fi bre precursor, Composites Sci. Technol., 37 21 -35.
45. R. J. P. Corriu, D. Leclerq, P. H. Mutin, and A. Vioux (1997) Preparation and structure of silicon oxycarbide glasses derived from polysiloxane precursors, J. Sol -Gel. Sci. Technol., 8 327 -330.
46. C. G. Pantano, A. K. Singh, and H. Zhang (1999) Silicon oxycarbide glasses, J. Sol -Gel Sci. Technol., 14 7 -25.
47. V. Belot, R. J. P. Corriu, D. Leclerq, P. H. Mutin, and A. Vioux (1992) Thermal redistribution reactions in crosslinked polysiloxanes, J. Poly. Sci. A: Polym. Chem., 30 613 -623.
48. J. Seitz, J. Bill, N. Egger, and F. Aldinger (1996) Structural investigations of Si/C/N -ceramics from polysilazane precursors by nuclear magnetic resonance, J. Eur. Ceram. Soc., 16 885 -891.
49. J. Bill, J. Seitz, G. Thurn, J. Dürr, J. Canel, B. Z. Janos, A. Jalowiecki, A. Sauter, S. Schempp, H. P. Lamparter, J. Mayer, and F. Aldinger (1998) Structure analysis and properties of Si -C -N ceramics derived from polysilazanes, Phys. Stat. Solidi A, 166 269 -296.
50. Y. Li, E. Kroke, R. Riedel, C. Fasel, C. Gervais, and F. Babonneau (2001) Thermal cross -linking and pyrolytic conversion of poly(ureamethylvinyl)silazanes to silicon -based ceramics, Appl. Organomet. Chem., 15 820 -832.
51. R. Riedel, E. Kroke, A. Greiner, A. O. Gabriel, L. Ruwisch, and J. Nicolich (1998) Inorganic solid -state chemistry with main group element carbodiimides, Chem. Mater., 10 2964 -2979.
52. R. Riedel, A. Greiner, G. Miehe, W. Dressler, H. Fuess, J. Bill, and F. Aldinger (1997) The fi rst crystalline solids in the ternary Si -C -N system, Angew. Chem. Int. Ed., 36 603 -606.
53. P. Greil and M. Seibold (1992) Modelling of dimensional changes during polymer -ceramic conversion for bulk component fabrication, J. Mater. Sci., 27 1053 -1060.
54. P. Greil (1995) Active -fi ller -controlled pyrolysis of preceramic polymers, J. Am. Ceram. Soc., 78 835 -848.
55. P. Greil (1998) Near net shape manufacturing of polymer derived ceramics, J. Eur. Ceram. Soc., 18 1905 -1914.
56. F. W. Ainger and J. M. Herbert, The preparation of phosphorus -nitrogen compounds as non -porous solids, in Special Ceramics, ed. P. Popper, p. 168, Academic Press, New York, 1965
57. P. G. Chantrell and P. Popper, Inorganic polymers and ceramics, in Special Ceramics, ed. P. Popper, p. 76, Academic Press, New York, 1965.
58. W. Verbeek (1973) Ger. Pat. No. 2218960 (Bayer AG), U.S. Patent No. 3853567
59. W. Verbeek and G. Winter (1974) Ger. Patent No. 2236078 (Bayer AG)
60. G. Winter, W. Verbeek, and M. Mansmann (1974) Ger. Patent No. 2243527.
61. G. Fritz and B. Raabe (1956) Bildung siliciumorganischer Verbindungen. V. Die Thermische Zersetzung von Si(CH 3) 4 und Si(C 2 H 5) 4, Z. Anorg. Allg. Chem., 286 149 -167.
62. S. Yajima, J. Hayashi, and M. Imori (1975) Continuous silicon carbide fi ber of high tensile strength, C hem. Lett., 9 931 -934.
63. S. Yajima, Y. Hasegawa, K. Okamura, and I. Matsuzawa (1978) Development of high tensile strength silicon carbide fi bre using an organosilicon polymer precursor, Nature (London), 273 525 -527.
64. R. M. Laine and F. Babonneau (1993) Preceramic polymer routes to silicon carbide, Chem. Mater., 5 260 -279.
65. Y. Hasegawa, M. Iimura, and S. Yajima (1980) Synthesis of continuous silicon carbide fi bre. Part 2. Conversion of polycarbosilane fi bre into silicon carbide fi bres, J. Mater. Sci., 15 720 -728.
66. H. Ichikawa, F. Machino, S. Mitsuno, T. Ishikawa, K. Okamura, and Y. Hasegawa (1986) Synthesis of continuous silicon carbide fi bre. Part 5. Factors affecting stability of polycarbosilane to oxidation, J. Mater. Sci., 21 4352 -4358.
67. Y. Hasegawa (1989) Synthesis of continuous silicon carbide fi bre. Part 6. Pyrolysis process of cured polycarbosilane fi bre and structure of SiC fi bre, J. Mater. Sci., 24 1177 -1190.
68. T. Taki, S. Maeda, K. Okamura, M. Sato, and T. Matsuzawa (1987) Oxidation curing mechanism of polycarbosilane fi bres by solid -state 29Si high -resolution NMR, J. Mater. Sci. Lett., 6 826 -828.
69. Y. Hasegawa and K. Okamura (1983) Synthesis of continuous silicon carbide fi bre. Part 3. Pyrolysis process of polycarbosilane and structure of the products, J. Mater. Sci., 18 3633 -3648.
70. G. D. Soraru, F. Babonneau, and J. D. Mackenzie (1990) 29 Si MAS -NMR investigation of the conversion process of a polytitanocarbosilane into SiC -TiC ceramics, J. Mater. Sci., 25 3664 -3670.
71. T. Seguchi, N. Kasai, K. Okamura, H. Ichikawa, M. Taeda, and M. Nishii M. (1993) U.S. Patent 5283044.
72. W. Verbeek (1973) Patent DE 2218960.
73. G. Winter, W. Verbeek, and M. Mansmann (1974) Patent DE 2243527.
74. D. Seyferth, G. H. Wiseman, C. A. Poutasse, J. M. Schwark, and Y. -F. Yu (1987) Organosilicon polymers as precursors for silicon -containing ceramics: Recent developments, Polym. Prepr., 28 389 -392.
75. G. Motz, J. Hacker, G. Ziegler, B. Claus, and D. Schawaller (2002) Low -cost ceramic SiCN fi bers by an optimized polycarbosilazane and continuous processing, Adv. Inorg. Str. Fiber Comp., 47 -54.
76. G. Motz (2006) Synthesis of SiCN -precursors for fi bers and matrices, Adv. Sci. Technol., 50 24 -30.
77. S. Kokott and G. Motz (2007) Cross -linking via electron beam treatment of a tailored polysilazane (ABSE) for processing of ceramic SiCN -fi bers, Soft Mater., 4 165 -174.
78. M. Takamizawa, T. Kobayashi, A. Hayashida, and Y. Takeda (1986) U.S. Patent 4604367.
79. T. Wideman, E. Cortez, E. E. Remsen, G. A. Zank, P. J. Carroll, and L. G. Sneddon (1997) Reactions of monofunctional boranes with hydridopolysilazanes: Synthesis, characterization, and ceramic conversion reactions of new processible precursors to SiNCB ceramic materials, Chem. Mater., 9 2218 -2230.
80. T. Wideman, P. J. Fazen, K. S u, E. E. Remsen, G. A. Zank, and L. G. Sneddon (1998) Second -generation polymeric precursors for BN and SiNCB ceramic materials, Appl. Organomet. Chem., 12 681 -693.
81. H. -P. Baldus, O. Wagner and M. Jansen (1992) Synthesis of advanced ceramics in the systems silicon -boron -nitrogen and silicon -boron -nitrogen -carbon employing novel precursor compounds, Mat. Res. Soc. Symp. Proc., 271 821 -826.
82. H. -P. Baldus, G. Passing, D. Sporn, and A. Thierauf (1995) Si -B -(N,C) a new ceramic material for high performance applications, Ceram. Trans. 75 -84.
83. H. -P. Baldus, M. Jansen, and D. Sporn (1999) Ceramic fi bers for matrix composites in high -temperature engine applications, Science 285, 699 -703.
84. o C, Nature, 382 796 -798.
85. S. Bernard, M. Weinmann, D. Cornu, P. Miele, and F. Aldinger (2005) Preparation of high -temperature stable Si -B -C -N fi bers from tailored single source polyborosilazanes, J. Eur. Ceram. Soc., 25 251 -256.
86. S. Bernard, M. Weinmann, P. Gerstel, P. Miele, and F. Aldinger (2005) Boron -modifi ed polysilazane as a novel single -source precursor for SiBCN ceramic fi bers: Synthesis, melt -spinning, curing and ceramic conversion, J. Mater. Chem., 5 289 -299.
87. F. A. Scheffler and J. D. Torrey, Coatings, in Polymer Derived Ceramics. From Nano -Structure to Applications, eds. P. Colombo, R. Riedel, G. D. Soraru, and H. -J. Kleebe, p. 358, DEStech Publications, Lancaster, PA, 2009.
88. G. Marletta, A. Toth, I. Bertoti, T. Minh Duc, F. Sommer, and K. Ferencz (1998) Optical properties of ceramic -like layers obtained by low energy ion beam irradiation of polysiloxane fi lms, Nucl. Instrum. Meth., B, 141 [1 -4] 684 -692.
89. Q. D. Nghiem, J. -K. Jeon, L. -Y. Hong, and D. -P. Kim (2003) Polymer derived Si -C -B -N ceramics via hydroboration from borazine derivatives and trivinylcyclotrisilazane, J. Organomet. Chem., 688 [1 -2] 27 -35.
90. J. D. Torrey and R. K. Bordia (2008) Processing of polymer -derived ceramic composite coatings on steel, J. Am. Ceram. Soc., 91 [1] 41 -45.
91. J. D. Torrey and R. K. Bordia (2008) Mechanical properties of polymer -derived ceramic composite coatings on steel, J. Eur. Ceram. Soc., 29 [1], 253 -257.
92. O. Goerke, E. Feike, T. Heine, A. Trampert, and H. Schubert (2004) Ceramic coatings processed by spraying of siloxane precursors, J. Eur. Ceram. Soc., 24 [7] 2141 -2147.
93. H. Lei, L. F. Francis, W. W. Grberich, and L. E. Craven (2001) Mat. Res. Soc. Symp. Proc., 653 Z.10.5.1.
94. H. Kozuka, S. Takenaka, H. Tokita, T. Hirano, Y. Higashi, and T. Hamatani (2003) Stress and cracks in gel -derived ceramic coatings and thick fi lm formation J. Sol -Gel Sci. Technol., 26 681 -686.
95. H. -J. Krau ß and Motz (2002) Laser pyrolysis of polysilazane -A new technique for the generation of ceramic -like coatings and structures, Key Eng. Mater., 206 -213 467 -470.
96. G. Motz and G. Ziegler (2002) Simple processibility of precursor -derived SiCH coatings by optimized precursors, Key Eng. Mater., 206 -213 475 -478.
97. M. Pavese, P. Fino, C. Badini, A. Ortona, and G. Marino (2008) HfB 2 /SiC as protective coating for 2D Cf/SiC composites: Effect of hight temperature oxidation on mechanical properties, S urf. Coat. Technol., 202 [10] 2059 -2067.
98. P. Cromme, M. Scheffler and P. Greil (2002) Ceramic tapes from preceramic polymers, Adv. Eng. Mater., 4 [11] 873 -877.
99. J. -G. Kho, K. -T. Moon, G. Nouet, P. Ruterana, and D. -P. Kim (2001) Boron -rich boron nitride (BN) fi lms prepared by a single spin_coating process of a polymeric precursor, Thin Solid Films, 389 [1 -2] 78 -83.
100. S. Jou, C. -T. Sun, and X. Chen (2005) Silicon Carbide fi lms from polycarbosilane and their usage as buffer layers for diamond deposition, Diamond Relat. Mater. 14 1688 -1694.
101. H. Termoss, B. Toury, A. Brioude, J. Dazord, J. Le Brusq, and P. Miele (2007) High purity boron nitride thin fi lms prepared by the PDC route, Surf. Coat. Technol., 201 [18] 7822 -7828.
102. Y. D. Blum, R. M. Platz and E. J. Crawford (1990) Glass strenghtening by polymer -derived ceramic coatings, J. Am. Ceram. Soc., 73 [1] 170 -172.
103. M. R. Mucalo, N. B. Milestone, I. C. Vickridge, and M. V. Swain (1994) Preparation of ceramic coatings from pre -ceramic precursors. Part 1. SiC and Si3N4/Si2N20 coatings on alumina substrates, J. Mater. Sci., 29 [17] 4487 -4499.
104. V. Bakumov, K. Gueinzius, C. Hermann, M. Schwarz, and E. Kroke (2007) Polysilazane -derived antibacterial silver -ceramic nanocomposites, J. Eur. Ceram. Soc., 27 [10] 3287 -3292.
105. K. Jarosch and H. I. de Lasa (1999) Novel riser simulator for methane reforming using high temperature membranes, Chem. Eng. Sci., 54 1455 -1460.
106. E. Kikuchi, Y. Nemoto, M. Kajikawa, S. Uemiya, and T. Kojima (2000) Steam reforming of methane in membrane reactors: Comparison of electroless -plating and CVD membranes and catalyst packing modes, Catal. Today, 56 75 -81.
107. A. K. Prabhu and S. T. Oyama (2000) Highly hydrogen selective ceramic membranes: Application to the transformation of greenhouse gases, J. Membr. Sci., 176 233 -248.
108. S. Kurungot, T. Yamaguchi, and S. Nakao (2003) Rh/ γ -Al 2 O 3 catalytic layer integrated with sol-gel synthesized microporous silica membrane for compact membrane reactor applications, C at. Lett., 86 273 -278.
109. Y. Iwamoto (2007) Precursors -derived ceramic membranes for high -temperature separation of hydrogen, J. Cer. Soc. Jpn., 115 [12] 947 -954.
110. Y. Iwamoto, Membranes, in Polymer Derived Ceramics. From Nano -Structure to Applications, eds. P. Colombo, R. Riedel, G. D. Soraru, and H. -J. Kleebe, p. 396, DEStech Publications, Lancaster, PA, 2009.
111. Y. Yoshino, T. Suzuki, B. N. Nair, H. Taguchi, and N. Itoh (2005) Development of tubular substrates, silica based membranes and membrane modules for hydrogen separation at high temperature, J. Membr. Sci., 267 8 -17.
112. R. Kojima, K. Sato, T. Nagaono, and Y. Iwamoto (2006) Gas permeation properties of amorphous SiC membranes synthesized from polycarbosilane without oxygen -curing process, J. Cer. Soc. Jpn., 114 533 -538.
113. T. Nagano, N. Uno, T. Saito, S. Yamazaki, and Y. Iwamoto (2007) Gas permeance behavior at elevated temperature in mesoporous anodic oxidized alumina synthesized by pulse -sequential voltage method, Chem. Eng. Commun., 194 158 -169.
114. Y. Iwamoto, K. Sato, T. Kato, T. Inada, and Y. Kubo (2005) Hydrogen permselective amorphous silica membrane derived from polysilazane, J. Eur. Ceram. Soc., 25 257 -264.
115. A. B. Shelekhin, E. J. Grosgogeat, and T. S. Hwang (1991) Gas separation properties of a new polymer/inorganic composite membrane, J. Membr. Sci., 66 129 -141.
116. T. Nagano, K. Sato, T. Saito, and Y. Iwamoto (2006) Gas permeation properties of amorphous SiC membrane synthesized from polycarbosilane without oxygen -curing process, J. Cer. Soc. Jpn., 114 533 -538.
117. o C, J. Am. Ceram. Soc., 90 275 -278.
118. H. Suda, H. Yamauchi, Y. Uchimaru, I. Fujiwara, and K. Haraya (2006) Structuralevolution of polycarbosilane precursor into silicon carbide -based microporous membranes, J. Cer. Soc. Jpn., 114 539 -544.
119. K. Kusakabe, Z. Y. Li, H. Maeda, and S. Morooka (1995) Preparation of supproted membrane by pyrolysis of polycarbosilane for gas separation at high temperature, J. Membr. Sci., 103 175 -180.
120. Z. Y. Li, K. Kusakabe, and S. Morooka (1996) Preparation of thermostable amorphous Si -C -O membrane and its application to gas separation at elevated temperature, J. Membr. Sci., 118 159 -168.
121. D. Lee, L. Zhang, S. T. Oyama, S. Niu, and R. F. Saraf (2004) Synthesis, characterization and gas permeation properties of a hydrogen permeable silica membrane supported on porous alumina, J. Membr. Sci., 231, 117 -126.
122. K. W. Völger, R. Hauser, E. Kroke, R. Riedel, Y. H. Ikuhara, and Y. Iwamoto (2006) Synthesis and characteization of novel non -oxide sol -gel derived mesoporous amorphous Si -C -N membranes, J. Cer. Soc. Jpn., 114 576 -560.
123. R. Hauser, S. Nahar -Borchard, R. Riedel, Y. H. Ikuhara, and Y. Iwamoto (2006) Polymer -derived SiBCN ceramics and their potential application for high temperature membranes, J. Cer. Soc. Jpn., 114 524 -528.
124. R. M. Prasad, Y. Iwamoto, R. Riedel, and A. Gurlo (2010) Multilayer amorphous -SiBCN/ γ -Al 2 O 3 / α -Al 2 O 3 membranes for hydrogen purifi cation, Adv. Eng. Mater., 12 522 -528.
125. P. Colombo and M. Scheffler, Highly porous components, in Polymer Derived Ceramics. From Nano -Structure to Applications, eds. P. Colombo, R. Riedel, G. D. Soraru, and H. -J. Kleebe, p. 379, DEStech Publications, Lancaster, PA, 2009.
126. P. Colombo (2008) In praise of pores, Science, 322 381 -383.
127. P. Colombo (2006) Conventional and novel processing methods for cellular ceramics, Phil. Trans. R. Soc. A, 364 109 -124.
128. P. Colombo and J. R. Hellmann (2002) Ceramic foams from preceramic polymers, Mat. Res. Innovat., 6 260 -272.
129. G. M. Renlund, W. P. Minnear, and A. A. Bracco (1991) U.S. Patent 4981829.
130. G. M. Renlund, L. N. Lewis, J. Stein, and A. A. Bracco (1993) U.S. Patent 5180694.
131. D. E. Daws, N. T. Castelluci, H. W. Carpenter, and M. W. Colby (1997) U.S. Patent 5643512.
132. P. Colombo, M. Griffoni, and M. Modesti (1998) Ceramic foams from a preceramic polymer and polyurethanes: Preparation and morphological characterization, J. Sol -Gel Sci. Technol., 13 195 -199.
133. P. Colombo and E. Bernardo (2003) Macro -and micro -cellular porous ceramics from preceramic polymers, Comp. Sci. Technol., 63 2353 -2359.
134. T. Gambaryan -Roisman, M. Scheffler, P. Buhler, and P. Greil (2000) Processing of ceramic foam by pyrolysis of fi ller containing phenylmethyl polysiloxane, Ceram. Trans., 108 121 -130.
135. J. Zeschky, F. Goetz -Neunhoeffer, J. Neubauer, S. H. Jason Lo, B. Kummer, M. Scheffler, and P. Greil (2003) Preceramic polymer derived cellular ceramics, Comp. Sci. Technol., 63 2361 -2370.
136. J. Zeschky, T. Hoefner, C. Arnold, R. Weißmann, D. Bahloul-Hourlier, M. Scheffler, and P. Greil (2005) Polysilsesquioxane derived ceramic foams with gradiant porosity, Acta Mater., 53 927 -937.
137. L. L. Whinnery, M. C. Nichols, D. R. Wheeler, and D. A. Loy (2005) Preparation of three -dimensional ordered macroporous SiCN ceramic using sacrifi cing template method, Micropor. Mesopor. Mater., 80 357 -362.
138. X. Bao, M. R. Nangrejo, and M. J. Edirisinghe (1999) Synthesis of silicon carbide foams from polymeric precursors and their blends, J. Mater. Sci., 34 2495 -2505.
139. P. Colombo, J. R. Hellmann, and D. L. Shelleman (2001) Mechanical properties of silicon oxycarbide ceramic foam, J. Am. Ceram. Soc., 84 [10], 2245 -2251.
140. T. Takahashi, H. Münsted, P. Colombo, and M. Modesti (2001) Thermalevolution of foamed blend of silicone resin nad polyurethane from preceramic to ceramic foam, J. Mater. Sci., 36 1627 -1639.
141. T. Takahashi, H. Münsted, P. Colombo, and M. Modesti (2001) Oxidation resistant ceramic foam from a silicone preceramic polymer/polyurethane blend, J. Eur. Ceram. Soc., 21 2821 -2828.
142. P. Colombo and J. R. Hellman (2002) Ceramic foams from preceramic polymers, Mat. Res. Innovat., 6 260 -272.
143. T. Gambaryan -Roisman, M. Scheffler, P. Buhler, and P. Greil (2000) Processing of ceramic foam by pyrolysis of fi ller containing phenylmethyl polysiloxane, Ceram. Trans., 108 121 -130.
144. J. Zeschky, T. Hoefner, C. Arnold, R. Weißmann, D. Bahloul -Hourlier, M. Scheffler, and P. Greil (2005) Polysilsesquioxane derived ceramic foams with gradiant porosity, Acta Mater., 53 927 -937.
145. U. F. Vogt, L. Györfy, A. Herzog, T. Graule, and G. Plesch (2007) Macroporous silicon carbide foams for porous burner applications and catalyst supports, J. Phys. Chem. Solids, 68 1234 -1238.
146. M. R. Nangrejo, X. Bao, and M. J. Edirisinghe (2000) Preparation of silicon carbide -silicon nitride composite foams from pre -ceramic polymers, J. Eur. Ceram. Soc., 20 1777 -1785.
147. M. R. Nangrejo, X. Bao, and M. J. Edirisinghe (2000) The structure of ceramic foams using polymeric precursors, J. Mater. Sci. Lett., 19 787 -789.
148. J. Yan, A. Wang, and D. -P. Kim (2006) Preparation of ordered mesoporous SiC from preceramic polymer templated by nanoporous silica, J. Phys. Chem. B, 110 5429 -5433.
149. P. Krawiec, D. Geiger, and S. Kaskel (2006) Ordered mesoporous silicon carbide (OM -SiC) via polymer precursor nanocasting, Chem. Commun., 23 2469 -2470.
150. J. Yan, A. Wang, and D. -P. Kim (2007) Preparation of ordered mesoporous SiCN ceramics with large surface area and high thermal stability, Micropor. Mesopor. Mater., 100 128 -133.
151. P. Greil (2001) Biomorphous ceramics from lignocellulosis, J. Eur. Ceram. Soc., 21 105 -118.
152. C. Zollfrank, R. Kladny, G. Motz, H. Sieber, and P. Greil (2001) Manufacturing of anisotropic ceramics from preceramic polymers and wood, Ceram. Trans., 114 43 -48.
153. C. Zollfrank, R. Kladny, G. Motz, H. Sieber, and P. Greil (2004) Biomorphous SiOC/C -ceramic composites from chemically modifi ed wood templates, J. Eur. Ceram. Soc., 24 479 -487.
154. C. R. Rambo and H. Sieber (2006) Manufacturing of cellular SiAlON/SiC composite ceramics from cardboard, J. Mater. Sci., 41 3315 -3322.
155. P. Colombo, E. Bernardo, and L. Biasseto (2004) Novel microcellular ceramics from a silicone resin, J. Am. Ceram. Soc., 87 [1] 152 -154.
156. C. M. Mitchell, D. -P. Kim, and P. J. A. Kenis (2006) Ceramic microreactors for on -site hydrogen production, J. Catal., 241 235 -242.
157. Y. -W. Kim, C. Wang, and C. B. Park (2007) Processing of porous silicon oxycarbide ceramics from extruded blend of polysiloxane and polymer microbead, J. Cer. Soc. Jpn., 115 419 -424.
158. M. Shibuya, T. Takahashi, and K. Koyama (2007) Microcellular ceramics by using silicone preceramic polymer and PMMA polymer sacrifi cial microbead, Comp. Sci. Tech., 67 119 -124.
159. H. Wang, X. D. Li, J. S. Yu, and D. -P. Kim (2004) Fabrication and characterization of ordered macroporous PMS -derived SiC from a sacrifi cial template method, J. Mater. Chem., 14 1383 -1386.
160. H. Wang, S. -Y. Zheng, X. D. Li, and D. -P. Kim (2005) Preparation of three -dimensional ordered macroporous SiCN ceramic using sacrifi cing template method, Micropor. Mesopor. Mater., 80 357 -362.
161. I. -K. Sung, C. M. Mitchell, D. -P. Kim, and P. J. A. Kenis (2005) Tailored macroporous SiCN and SiC structures for high -temperature fuel reforming, Adv. Funct. Mater., 15 1336 -1342.
162. C. Vakifahmetoglu, I. Menapace, A. Hirsch, L. Biasetto, R. Hauser, R. Riedel, and P. Colombo (2009) Highly porous macro -and micro -cellular ceramics from a polysilazane precursor, Ceramics Int., 35 [8] 3281 -3290.
163. S. H. Kim, Y. -W. Kim, and C. B. Park (2004) Effect of inert fi ller addition on pore size and porosity of closed -cell silicon oxycarbide foams, J. Mater. Sci., 39 3513 -3515.
164. Y. -W. Kim, S. H. Kim, H. -D. Kim, and C. B. Park (2004) Processing of closed -cell silicon oxycarbide foams from a preceramic polymer, J. Mater. Sci., 39 5647 -5652.
165. Y. -W. Kim, Y. -J. Jin, Y. -S. Chun, I. -H. Song, and H. -D. Kim (2005) A simple pressing route to closed -cell microcellular ceramics, Scripta Mater., 53, 921 -926.
166. R. A. Dorey, S. A. Rocks, F. Dauchy, D. Wang, F. Bortolan, and E. Hugo (2008) Integrating functional ceramics into microsystems, J. Eur. Ceram. Soc., 28 1397 -1403.
167. W. Bauer, H. J. Ritzhaupt -Kleissl, and J. Hausselt (1998) Slip casting of ceramic microcomponents, M icrosyst. Technol., 4 125 -127.
168. J. A. Bride, S. Baskaran, N. T. Taylor, W. Halloran, W. H. Juan, S. W. Pang, and M. O ' Donell (1993) Photolithographic micromolding of ceramics using plasma etched polyimide patterns, Appl. Phys. Lett., 63 [24] 3379 (3p).
169. A. Navarro, S. A. Rocks, and R. A. Dorey (2007) Micromoulding of lead zirconate titanate (PZT) structures for MEMS, J. Electroceram., 19 321 -326.
170. U. P. Schönholzer, R. Hummel, and L. J. Gauckler (2000) Microfabrication of ceramics by fi lling of photoresist molds, Adv. Mater., 12 [17] 1261 -1263.
171. T. Hanemann, J. Boehm, P. Henzi, K. Honnef, K. Litfin, E. Ritzhaupt -Kleissl, and J. Hausselt (2004) From micro to nano: Properties and potential applications of micro -and nano -fi lled polymer ceramic composites in microsystem technology, IEEE Proc. Nanobiotechnol., 151 [4] 167 -172.
172. B. Su, T. W. Button, A. Schneider, L. Singleton, and P. Prewett (2002) Embossing of 3D ceramic microstructures, Microsyst. Technol., 8 359 -362.
173. C. R. Martin and I. A. Aksay (2004) Submicrometer -scale patterning of ceramic thin fi lms, J. Electroceram., 12 53 -68.
174. H. J. Ritzhaupt -Kleissl, W. Bauer, E. Günther, J. Laubersheimer, and J. Hausselt (1996) Development of ceramic microstructures, Microsyst. Technol., 2 130 -134.
175. R. Knitter, E. Günther, C. Odemer, and U. Maciejewski (1996) Ceramic microstructures and potential applications, Microsyst. Technol., 2 135 -138.
176. C. S. Roper, C. Carraro, R. T. Howe, and R. Maboudian (2006) Silicon carbide thin fi lms using 1,3 -disilabutane single precursor for MEMS applications -A review, ECS Trans., 3 [10] 267 -280.
177. C. Marzolin, S. P. Smith, M. Prentiss, and G. M. Whitesides (1998) Fabrication of glass microstructures by micro -molding of sol -gel precursors, Adv. Mater., 10 [8] 571 -574.
178. S. Seraji, Y. Wu, N. E. Jewell -Larson, M. J. Forbess, S. J. Limmer, T. P. Chou, and G. Cao (2000) Patterned microstructure of sol -gel derived complex oxides using soft lithography, Adv. Mater., 12 [19] 1421 -1424.
179. C. M. Chan, G. Z. Cao, and T. G. Stoebe (2000) Net shape ceramic microcomponents by modifi ed sol -gel casting, Microsyst. Technol., 6 200 -204.
180. M. Schulz, Microfabrication and MEMS/NEMS, in Polymer Derived Ceramics. From Nano -Structure to Applications, eds. P. Colombo, R. Riedel, G. D. Soraru, and H. -J. Kleebe, p. 416, DEStech Publications, Lancaster, PA, 2009.
181. A. Campo and E. Arzt (2008) Fabrication approaches for generating complex micro -and nanopatterns on polymeric surfaces, Chem. Rev., 108 911 -945.
182. B. D. Gates, Q. Xu, M. Stewart, D. Ryan, C. G. Willson, and G. M. Whitesides (2005) New approaches to nanofabrication: molding, printing, and other techniques, Chem. Rev., 105 1171 -1196.
183. M. Schulz, M. Boerner, J. Goettert, T. Hanemann, J. Hausselt, and G. Motz (2004) Cross linking behavior of preceramic polymers effected by UV -and synchrotron radiation, Adv. Eng. Mater., 6 [8] 676 -680.
184. M. Schulz, M. Boerner, J. Hausselt, and R. Heldele (2005) Polymer derived ceramic microparts from X -ray lithography -Cross -linking behavior and process optimization, J. Eur. Ceram. Soc., 25 199 -204.
185. L. A. Liew, V. M. Bright, and R. Raj (2002) Fabrication of SiCN MEMS by photopolymerization of preceramic polymer, Sensors Actuators A Phys., 95 [2 -3] 120 -134.
186. T. A. Pham, D. -P. Kim, T. W. Lim, S. H. Park, D. Y. Yang, and K. S. Lee (2006) Three -dimensional SiCN ceramic microstructures via nano -stereolithography of inorganic polymer photoresists, A dv. Func. Mater., 16 [9] 1235 -1241.
187. T. A. Pham, P. Kim, M. Kwak, K. Y. Suh, and D. -P. Kim (2007) Inorganic polymer photoresist for direct ceramic patterning by photolithography, Chem. Commun., 4021 -4023.
188. W. Ehrfeld and D. Münchmeyer (1991) Three -dimensional microfabrication using synchrotron radiation, Nucl. Instr. Methods Phys. Res. A, 303 523 -531.
189. U. P. Schönholzer, R. Hummel, and L. J. Gauckler (2000) Microfabrication of ceramics by fi lling of photoresist molds, Adv. Mater., 12 [17] 1261 -1263.
190. T. Hanemann, J. Boehm, P. Henzi, K. Honnef, K. Litfin, E. Ritzhaupt -Kleissl, and J. Hausselt (2004) From micro to nano: properties and potential applications of micro -and nano -fi lled polymer ceramic composites in microsystem technology, IEEE Proc. Nanobiotechnol., 151 [4] 167 -172.
191. L. Liew, W. Zhang, L. A n, S. Shah, R. Lou, Y. Liu, T. Cross, M. Dunn, V. Bright, J. Daily, R. Raj, and K. Anseth (2001) Ceramic MEMS -New materials, innovative processing and future applications, Am. Ceram. Soc. Bull., 80 [5] 25 -30.
192. L. A. Liew, V. M. Bright, and R. Raj (2003) A novel micro glow plug fabricated from polymer -derived ceramics: In situ measurement of high -temperature properties and application to ultrahigh -temperature ignition, Sens. Actuators A Phys., 104 [3] 246 -262.
193. Y. Xia, J. A. Rogers, K. E. Paul, and G. M. Whitesides (1999) Unconventional methods for fabricating and patterning nanostructures, Chem Rev., 99 1823 -1848.
194. X. M. Zhao, Y. Xia, and G. M. Whitesides (1997) Soft -lithographic methods for nanofabrication, J. Mater. Chem., 7 [7] 1069 -1074.
195. Y. Xia and G. M. Whitesides (1998) Soft lithography, Angew. Chem. Int. Ed., 37 550 -575.
196. H. Yang, P. Deschatelets, S. T. Brittain, and G. M. Whitesides (2001) Fabrication of high performance ceramic microstructures from a polymeric precursor using soft lithography, Adv. Mater., 13 [1] 54 -58.
197. G. Feiertag, W. Ehrfeld, H. Freimuth, H. Kolle, H. Lehr, M. Schmidt, M. M. Sigalas, C. M. Soukoulis, G. Kiriakidis, T. Pedersen, J. Kuhl, and W. Koenig (1997) Fabrication of photonic crystals by deep X -ray lithography, Appl. Phys. Lett., 71 [11] 1441 -1443.
198. L. A. Liew, R. A. Saravanan, V. M. Bright, M. L. Dunn, J. W. Daily, and R. Raj (2003) Processing and characterization of silicon carbon -nitride ceramics: Application of electrical properties towards MEMS thermal actuators, Sens. Actuators A Phys., 103 [1 -2] 171 -181.
199. S. R. Boddapati and S. Brahmandam, Non -conventional pyrolysis and processing, in Polymer Derived Ceramics. From Nano -Structure to Applications, eds. P. Colombo, R. Riedel, G. D. Soraru, and H.-J. Kleebe, p. 443, DEStech Publications, Lancaster, PA, 2009.
200. G. W. Rice and R. L. Woodin (1989) Kinetics and mechanism of laser -driven powder synthesis from organosilane precursors, J. Mater. Res., 4 [6] 1538 -1548.
201. G. W. Rice (1986) Synthesis of Si/C/N powders from 1,1,1,3,3,3 -hexamethyldisilazane, J. Am. Ceram. Soc., 69 [8] C -183 / C -185.
202. K. E. Gonsalves, P. R. Strutt, T. D. Xiao, and P. G. Klemens (1992) Synthesis of Si(C,N) nanoparticles by rapid laser polycondensation/cross -linking reactions of an organosilazane precursor, J. Mater. Sci., 27 3231 -3238.
203. M. Suzuki, Y. Maniette, Y. Nakata, and T. Okutani (1993) Synthesis of silicon carbide -silicon nitride composite ultrafi ne particles using a carbon dioxide laser, J. Am. Ceram. Soc., 76 [5] 1195 -1200.
204. M. Cauchetier, O. Croix, N. Herlin, and M. Luce (1994) Nanocomposite Si/C/N powder production by laser -aerosol interaction, J. Am. Ceram. Soc., 77 [4] 993 -998.
205. K. Jakubenas and H. L. Marcus (1995) Silicon carbide from laser pyrolysis of polycarbosilane, J. Am. Ceram. Soc., 78 [8] 2263 -2266.
206. T. -H. A. Shan and R. Cozzens (1994) Microwave curing of silicon carbide ceramics from a polycarbosilane precursor, Mat. Res. Soc. Symp. Proc., 347 729 -734.
207. G. A. Danko, R. Silbergitt, P. Colombo, E. Pippel, and J. Woltersdorf (2000) Comparison of microwave hybrid and conventional heating of preceramic polymers to form silicon carbide and silicon oxycarbide ceramics, J. Am. Ceram. Soc., 83 [7] 1617 -1625.
208. J. C. Pivin, P. Colombo, and M. Tonidandel (1996) Ion irradiation of preceramic polymer thin fi lms, J. Am. Ceram. Soc., 79 [7] 1967 -1970.
209. J. C. Pivin and P. Colombo (1997) Ceramic coatings by ion irradiation of polycarbosilanes and polysiloxanes. Part I: Conversion mechanism, J. Mater. Sci., 32 6163 -6173.
210. J. C. Pivin and P. Colombo (1997) Ceramic coatings by ion irrradiation of polycarbosilanes and polysiloxanes. Part II: Hardness and thermochemical stability, J. Mater. Sci., 32 6175 -6182.
211. R. Riedel, L. Toma, C. Fasel, and G. Miehe (2009) Polymer -derived mullite -SiC -based nanocomposites, J. Eur. Ceram. Soc., 29 3079 -3090.
212. C. Konetschny, Hartstoffhaltigen Si -C -N -Keramiken aus polysilazanen, Ph.D. Thesis, Darmstadt, Shaker Verlag, Aachen, Germany, 1999.
213. P. Colombo (2008) Engineering porosity in polymer -derived ceramics, J. Eur. Ceram. Soc., 28 1389 -1395.
214. S. M. Crespiera, E. Ionescu, and R. Riedel, unpublished results.
215. Y. Xia and G. M. Whitesides (1998) Soft lithography, Angew. Chem., 110 568 -594.