Preparation of thermostable amorphous Si-C-O membrane and its application to gas separation at elevated temperature

Journal of Membrane Science

Volumn 118, Issue 2, 1996, Pages 159-168

  Li, Zhongyang ^a   Kusakabe, Katsuki ^a   Morooka, Shigeharu ^a  

^a KYUSHU UNIVERSITY   (Japan)

Author keywords

Elevated temperature; Gas separation; Preparation; Si C O membrane; Thermostable

Indexed keywords

ALUMINUM OXIDE; POLYSTYRENE; SILICON;

ARTICLE; HIGH TEMPERATURE; MEMBRANE; PRIORITY JOURNAL; PYROLYSIS; THERMOSTABILITY;

AMORPHOUS MATERIALS; CERAMIC MATERIALS; COMPOSITION EFFECTS; HIGH TEMPERATURE EFFECTS; HYDROGEN; MECHANICAL PERMEABILITY; NITROGEN; POLYSTYRENES; POROUS MATERIALS; PYROLYSIS; SEPARATION; THERMODYNAMIC STABILITY;

GAS SEPARATION; POLYCARBOSILANE;

GAS PERMEABLE MEMBRANES;

MEMBRANES-CERAMIC; SEPARATION-GAS/GAS;

EID: 0030474396     PISSN: 03767388     EISSN: None     Source Type: Journal    
DOI: 10.1016/0376-7388(96)00086-5     Document Type: Article

References (34)

1. [1] R.R. Bhave, Inorganic Membranes: Synthesis and Applications, Van Nostrand Reinhold, New York, 1991.
2. 2 films, Chem. Eng. Sci., 44 (1989) 1829-1835.
3. 2-Vycor membranes, J. Membrane Sci., 87 (1994) 281-296.
4. 2-permselective silica membranes, J. Membrane Sci., 103 (1995) 211-218.
5. 2 membrane formed in pores of alumina support tube by chemical vapor deposition with tetraethyl orthosilicate, Ind. Eng. Chem. Res., 33 (1994) 2096-2101.
6. 2 membrane in macropores of α-alumina support tube by thermal decomposition of TEOS. J. Membrane Sci., 101 (1995) 89-98.
7. [7] M. Asaeda, Y. Oki and T. Manabe, Preparation of porous silica membranes for separation of inorganic gaseous mixtures at high temperature. Sub-area C, Report on Energy Conversion and Utilization with High Efficiency, Ministry of Education, Science and Culture, Japan, 1993, pp. 253-258.
8. [8] R.J.R. Uhlhorn, K. Keizer and A.J. Burggraaf, Gas transport and separation with ceramic membranes. Part II. Synthesis and separation properties of microporous membranes, J. Membrane Sci., 66 (1992) 271-287.
9. [9] R.S.A. de Lange, J.H.A. Hekkink, K. Keizer and A.J. Burggraaf, Formation and characterization of supported microporous ceramic membranes prepared by sol-gel modification techniques, J. Membrane Sci., 99 (1995) 57-75.
10. [10] S.H. Hyun and B.S. Kang, Synthesis of nanoparticulate silica composite membranes by the pressurized sol-gel technique, J. Am. Ceram. Soc., 77 (1994) 3093-3098.
11. [11] A.B. Shelekhin, S. Pien and Y.H. Ma, Permeability, surface area. pore volume and pore size of Vycor glass membrane heat-treated at high temperatures, J. Membrane Sci., 103 (1995) 39-43.
12. [12] A.F.M. Leenaars, K. Keizer and A.J. Burggraaf, The preparation and characterization of alumina membranes with ultrafine pores, Part 1 Microstructural investigation on non-supported membranes, J. Mater. Sci., 19 (1984) 1077-1088.
13. [13] Y.-S. Lin and A.J. Burggraaf, Preparation and characterization of high-temperature thermally stable alumina composite membrane, J. Am. Ceram. Soc., 74 (1991) 219-224.
14. [14] M. Chai, M. Machida, K. Eguchi and H. Arai, Preparation and characterization of sol-gel derived microporous membranes with high thermal stability, J. Membrane Sci., 96 (1994) 205-212.
15. [15] J. Lipowitz, Polymer-derived ceramic fibres, Ceram. Bull., 70 (1991) 1888-1894.
16. [16] S. Yajima, Y. Hasegawa, J. Hayashi and M. Iimura, Synthesis of continuous silicon carbide fibre with high tensile strength and high Young's modulus. Part 1. Synthesis of polycarbosilane as precursor, J. Mater. Sci., 13 (1978) 2569-2576.
17. [17] Y. Hasegawa, M. Iimura and S. Yajima, Synthesis of continuous silicon carbide fibre. Part 2., Conversion of polycarbosilane fibre into silicon carbide fibres, J. Mater. Sci., 15 (1980) 720-728.
18. [18] Y. Hasegawa, K. Okamura, Synthesis of continuous silicon carbide fibre. Part 3. Pyrolysis process of polycarbosilane and structure of the products, J. Mater. Sci., 18 (1983) 3633-3648.
19. [19] T. Shimoo, K. Ohata, M. Narisawa and K. Okamura, Mechanism of conversion from oxidation-cured polycarbosilane to SiC ceramic fibers, J. Ceram. Soc. Jpn., 102 (1994) 950-956.
20. [20] P. Greil, Active-filler-controlled pyrolysis of preceramic polymers, J. Am. Ceram. Soc., 78 (1995) 835-848.
21. [21] A.B. Shelekhin E.J. Grosgogeat and S.-T. Hwang, Gas separation properties of a new polymer/inorganic composite membrane, J Membrane Sci., 66 (1992) 129-141.
22. [22] D. Li and S.-T. Hwang, Preparation and characterization of silicon based inorganic membrane for gas separation, J. Membrane Sci., 59 (1991) 331-352.
23. [23] K. Kusakabe, Z.Y. Li, H. Maeda and S. Morooka, Preparation of supported composite membrane by pyrolysis of polycarbosilane for gas separation at high temperature, J. Membrane Sci., 103 (1995) 175-180.
24. [24] Y.D. Chen and R.T. Yang, Preparation of carbon molecular sieve membrane and diffusion of binary mixtures in the membrane, Ind. Eng. Chem. Res., 33 (1994) 3146-3153.
25. [25] M.B. Rao and S. Sircar, Nanoporous carbon membranes for separation of gas mixtures by selective surface flow, J. Membrane Sci., 85 (1993) 253-264.
26. [26] J. Hayashi, M. Yamamoto, K. Kusakabe and S. Morooka, Simultaneous improvement of permeance and permselectivity of 3,3′,4,4′-biphenyltetracarboxylic dianhydride-4,4′-oxydianiline polyimide membrane by carbonization, Ind. Eng. Chem. Res., 34 (1995) 4364-4370.
27. [27] C.W. Jones and W.J. Koros, Characterization of ultramicroporous carbon membranes with humidified feeds, Ind. Eng. Chem. Res., 34 (1995) 158-163.
28. [28] J.E. Koresh and A. Soffer, Molecular sieve carbon permselective membrane. Part I. Presentation of a new device for gas mixture separation, Sep. Sci. Technol., 18 (1983) 723-734.
29. [29] G.D. Soraru, F. Babonneau and J.D. Mackenzie, Structural evolutions from polycarbosilane to SiC ceramic, J. Mater. Sci., 25 (1990) 3886-3893.
30. [30] E. Bouillon, F. Langlais, R. Pailler, R. Naslain, F. Cruege, P.V. Huong, J.C. Sarthou, A. Delpuech, C. Laffon, P. Lagarde, M. Monthioux and A. Oberlin, Conversion mechanisms of a polycarbosilane precursor into an SiC-based ceramic material, J Mater. Sci., 26 (1991) 1333-1345.
31. [31] E. Bouillon, D. Mocaer, J.F. Villeneuve, R. Pailler, R. Naslain, M. Monthioux, A. Oberlin, C. Guimon and G. Pfister, Composition-microstructure-property relationships in ceramic monofilaments resulting from the pyrolysis of a polycarbosilane precursor at 800 to 1400°C, J. Mater. Sci., 26 (1991) 1517-1530.
32. [32] L.A. Wall, S. Straus, J.H. Flynn, D. McIntyre and R. Simha, The thermal degradation mechanism of polystyrene, J. Phys. Chem., 70 (1966) 53-62.
33. [33] J. Lipowitz, J.A. Rabe, L.K. Frevel and R.L. Miller, Characterization of nanoporosity in polymer-derived ceramic fibres by X-ray scattering techniques, J. Mater. Sci., 25 (1990) 2118-2124.
34. 2 films formed by chemical vapor deposition, AIChE Symp. Ser., 85(268) (1989) 68-74.