Cross-linking via electron beam treatment of a tailored polysilazane (ABSE) for processing of ceramic SiCN-fibers

Soft Materials

Volumn 4, Issue 2-4, 2006, Pages 165-174

  Kokott, Sylvia ^a   Motz, Günter ^a  

^a UNIVERSITY OF BAYREUTH   (Germany)

Author keywords

Gel fraction; Precursor ceramic; Radiation curing; SiCN fibers

Indexed keywords

CROSSLINKING; CURING; ELECTRON BEAMS; MELT SPINNING; MOLECULAR WEIGHT; PYROLYSIS; SYNTHESIS (CHEMICAL);

GEL FRACTION; POLYCARBOSILAZANE; PRECURSOR CERAMICS; RADIATION CURING; SICN-FIBERS;

CERAMIC FIBERS;

EID: 34547749435     PISSN: 1539445X     EISSN: 15394468     Source Type: Journal    
DOI: 10.1080/15394450701309881     Document Type: Article

References (35)

1. Heide, J. (2000) Fortschritt-Berichte VDI, Reihe Grund- und Werkstoffe /Kunststoffe; VDI Verlag: Hamburg; Vol. 598, 11-13.
2. Bunsell, A.R. and Berger, M.-H. (eds.) (1999) Fine Ceramic Fibers; Marcel Dekker Inc: New York.
3. Clauss, B. (2002) Keramische Verbundwerkstoffe (Ceramic Compounds); Krenkel, W. (ed.); WiLEY-VHC Verlag: Weinheim, 23-47.
4. Tressler, R.E. (1999) Composites: Part A, 30: 429-437.
5. Fitzer, E. (ed.) (1985) Carbon Fibers and Their Composites; Springer Verlag: Berlin.
6. Schmücker, M. (2004) TU Contact Forschung: 14, 63-68.
7. Committee on Advanced Fibers for High-Temperature Ceramic Composites National Materials Advisory Board Commission on Engineering and Technical Systems National Research Council (1998) National Academy Press: Washington, D.C., 20-54.
8. Deléglise, F., Berger, M.H., and Bunsell, A.R. (2000) J. Eur. Ceram. Soc., 22: 1501.
9. Clauß, B. (2000) Technische Textilien (Technical textiles) 43: 246-251.
10. Clade, J., Spider, E., and Sporn, D. (2005) J. Eur. Ceram. Soc., 25: 123-127.
11. Riedel, R., Passing, G., Schönfelder, H., and Brook, R.J. (1992) Nature, 355: 714.
12. Riedel, R., Seher, M., Mayer, J., and Szabó, D.-V.J. (1995) J. Eur. Ceram. Soc., 15: 703.
13. Riedel, R. (1996) Materials Science and Technology Vol 17 B; Chan, R.W., Haasen, P., Kramer, E.J. and Brook, R.J. (eds.); VCH: Weinheim; 1.
14. Seyferth, D. and Wieseman, G. (1984) J. Am. Ceram. Soc., 67:C-132.
15. Salvetti, M.G., Pijolat, M., Soustelle, M., and Chassagneux, E. (1993) Solid State Ionics, 63-65: 332-339.
16. Schoenfelder, H., Aldinger, F., and Riedel, R. (1993) J. Phys., IV: 1293-1298.
17. Riedel, R. (1993) Nicht-oxidische Keramiken aus anorganischen Vorstufen (Non-oxidic ceramics made of anorganic precursors); Petzow, G. and Jeglitsch, F. (eds.) Metallkundlich-Technische Reihe 12, Gebrüder Borntraeger Berlin: Stuttgart.
18. Ziegler, G., Kleebe, H.-J., Motz, G., Müller, H., Weibelzahl, W., and Traßl, S. (1999) J. Mater. Chem. Phys., 61: 55-63.
19. Chollon, G. (2000) J. Europ. Ceram. Soc., 20: 1959-1974.
20. Hacker, J. (2004) Entwicklung einer preiswerten keramischen Fasern für den Anwendungsbereich bis 1400 Grad Celsius auf der Basis eines spinnfähigen siliciumorganischen Polymers (Development of a low-cost ceramic fibre for applications up to 1400°C on the basis of a spinable silicon-organic polymer). PhD Thesis, University of Bayreuth.
21. Motz, G., Hacker, J., and Ziegler, G. (2000) Ceram. Eng. Sci. Proc., 21: 307-314.
22. Hacker, J., Motz, G., and Ziegler, G. (2001) Proc. of the High Temperature Ceramic Matrix Composites; Krenkel, W., Naslain, R. and Schneider, H. (eds.); Wiley-VCH: 52-55.
23. Hacker, J., Motz, G., and Ziegler, G. (2000) Ceramic Materials and Components for Engines, 653-656.
24. Takeda, M., Imai, Y., Ichikawa, H., and Ischikawa, T. (1991) Ceram. Eng. Sci. Proc., 12: 1007-1018.
25. Kamimura, S., Seguchi, T., and Okamura, K. (1999) Rad. Phy. and Chem., 54: 575-581.
26. Motz, G., Hacker, J., and Ziegler, G. (2002) Ceram. Eng. Sci. Proc., 23 (3): 255-260.
27. DIN 16892. (2000) Rohre aus vernetztem Polyethylen hoher Dichte (PE-X) Allgemeine Güteanforderungen, Prüfung, 6.5. Vernetzungsgrad" (Pipes made of cross-linked high density polyethylene (PE-X) Generally requirements in quality, proofing, 6.5 degree of cross linking). Beuth Verlag GmbH: Berlin.
28. Clough, R.L. (2001) NIM, B, 185: 8-33.
29. Clealand, M.R., Parks, L.A., and Cheng, S. (2003) NIM, B., 208: 66-73.
30. Chmielewski, A.G., Haji-Saeid, M., and Ahmed, S. (2005) NIM, B, 236: 44-54.
31. Trassl, S., Motz, G., Rössler, E., and Ziegler, G. (2002) J. Am. Ceram. Soc., 85: 239-244.
32. Trassl, S., Kleebe, H.-J., Stormer, H., Motz, G., Rössler, E., and Ziegler, G. (2002) J. Am. Ceram. Soc., 85: 1268-1274.
33. Kleebe, H.-J. (1998) Phys. Stat. Sol. (a), 166: 297.
34. Kleebe, H.-J., Suttor, D., Müller, H., and Ziegler, G. (1998J. Am. Ceram. Soc., 81 (11): 2971-2977.
35. Iwamoto, Y., Völger, W., Kroke, E., and Riedel, R. (2001J. Am. Ceram. Soc., 84 (10): 2170-2178.